2619 lines · plain
1# SPDX-License-Identifier: GPL-2.0-only2#3# Hardware monitoring chip drivers configuration4#5 6menuconfig HWMON7 tristate "Hardware Monitoring support"8 depends on HAS_IOMEM9 default y10 help11 Hardware monitoring devices let you monitor the hardware health12 of a system. Most modern motherboards include such a device. It13 can include temperature sensors, voltage sensors, fan speed14 sensors and various additional features such as the ability to15 control the speed of the fans. If you want this support you16 should say Y here and also to the specific driver(s) for your17 sensors chip(s) below.18 19 To find out which specific driver(s) you need, use the20 sensors-detect script from the lm_sensors package. Read21 <file:Documentation/hwmon/userspace-tools.rst> for details.22 23 This support can also be built as a module. If so, the module24 will be called hwmon.25 26if HWMON27 28config HWMON_VID29 tristate30 31config HWMON_DEBUG_CHIP32 bool "Hardware Monitoring Chip debugging messages"33 help34 Say Y here if you want the I2C chip drivers to produce a bunch of35 debug messages to the system log. Select this if you are having36 a problem with I2C support and want to see more of what is going37 on.38 39comment "Native drivers"40 41config SENSORS_ABITUGURU42 tristate "Abit uGuru (rev 1 & 2)"43 depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT44 help45 If you say yes here you get support for the sensor part of the first46 and second revision of the Abit uGuru chip. The voltage and frequency47 control parts of the Abit uGuru are not supported. The Abit uGuru48 chip can be found on Abit uGuru featuring motherboards (most modern49 Abit motherboards from before end 2005). For more info and a list50 of which motherboards have which revision see51 Documentation/hwmon/abituguru.rst52 53 This driver can also be built as a module. If so, the module54 will be called abituguru.55 56config SENSORS_ABITUGURU357 tristate "Abit uGuru (rev 3)"58 depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT59 help60 If you say yes here you get support for the sensor part of the61 third revision of the Abit uGuru chip. Only reading the sensors62 and their settings is supported. The third revision of the Abit63 uGuru chip can be found on recent Abit motherboards (since end64 2005). For more info and a list of which motherboards have which65 revision see Documentation/hwmon/abituguru3.rst66 67 This driver can also be built as a module. If so, the module68 will be called abituguru3.69 70config SENSORS_SMPRO71 tristate "Ampere's Altra SMpro hardware monitoring driver"72 depends on MFD_SMPRO73 help74 If you say yes here you get support for the thermal, voltage,75 current and power sensors of Ampere's Altra processor family SoC76 with SMpro co-processor.77 78config SENSORS_AD731479 tristate "Analog Devices AD7314 and compatibles"80 depends on SPI81 help82 If you say yes here you get support for the Analog Devices83 AD7314, ADT7301 and ADT7302 temperature sensors.84 85 This driver can also be built as a module. If so, the module86 will be called ad7314.87 88config SENSORS_AD741489 tristate "Analog Devices AD7414"90 depends on I2C91 help92 If you say yes here you get support for the Analog Devices93 AD7414 temperature monitoring chip.94 95 This driver can also be built as a module. If so, the module96 will be called ad7414.97 98config SENSORS_AD741899 tristate "Analog Devices AD7416, AD7417 and AD7418"100 depends on I2C101 help102 If you say yes here you get support for the Analog Devices103 AD7416, AD7417 and AD7418 temperature monitoring chips.104 105 This driver can also be built as a module. If so, the module106 will be called ad7418.107 108config SENSORS_ADM1025109 tristate "Analog Devices ADM1025 and compatibles"110 depends on I2C111 select HWMON_VID112 help113 If you say yes here you get support for Analog Devices ADM1025114 and Philips NE1619 sensor chips.115 116 This driver can also be built as a module. If so, the module117 will be called adm1025.118 119config SENSORS_ADM1026120 tristate "Analog Devices ADM1026 and compatibles"121 depends on I2C122 select HWMON_VID123 help124 If you say yes here you get support for Analog Devices ADM1026125 sensor chip.126 127 This driver can also be built as a module. If so, the module128 will be called adm1026.129 130config SENSORS_ADM1029131 tristate "Analog Devices ADM1029"132 depends on I2C133 help134 If you say yes here you get support for Analog Devices ADM1029135 sensor chip.136 Very rare chip, please let us know you use it.137 138 This driver can also be built as a module. If so, the module139 will be called adm1029.140 141config SENSORS_ADM1031142 tristate "Analog Devices ADM1031 and compatibles"143 depends on I2C144 help145 If you say yes here you get support for Analog Devices ADM1031146 and ADM1030 sensor chips.147 148 This driver can also be built as a module. If so, the module149 will be called adm1031.150 151config SENSORS_ADM1177152 tristate "Analog Devices ADM1177 and compatibles"153 depends on I2C154 help155 If you say yes here you get support for Analog Devices ADM1177156 sensor chips.157 158 This driver can also be built as a module. If so, the module159 will be called adm1177.160 161config SENSORS_ADM9240162 tristate "Analog Devices ADM9240 and compatibles"163 depends on I2C164 select HWMON_VID165 select REGMAP_I2C166 help167 If you say yes here you get support for Analog Devices ADM9240,168 Dallas DS1780, National Semiconductor LM81 sensor chips.169 170 This driver can also be built as a module. If so, the module171 will be called adm9240.172 173config SENSORS_ADT7X10174 tristate175 select REGMAP176 help177 This module contains common code shared by the ADT7310/ADT7320 and178 ADT7410/ADT7420 temperature monitoring chip drivers.179 180 If built as a module, the module will be called adt7x10.181 182config SENSORS_ADT7310183 tristate "Analog Devices ADT7310/ADT7320"184 depends on SPI_MASTER185 select SENSORS_ADT7X10186 help187 If you say yes here you get support for the Analog Devices188 ADT7310 and ADT7320 temperature monitoring chips.189 190 This driver can also be built as a module. If so, the module191 will be called adt7310.192 193config SENSORS_ADT7410194 tristate "Analog Devices ADT7410/ADT7420"195 depends on I2C196 select SENSORS_ADT7X10197 help198 If you say yes here you get support for the Analog Devices199 ADT7410 and ADT7420 temperature monitoring chips.200 201 This driver can also be built as a module. If so, the module202 will be called adt7410.203 204config SENSORS_ADT7411205 tristate "Analog Devices ADT7411"206 depends on I2C207 help208 If you say yes here you get support for the Analog Devices209 ADT7411 voltage and temperature monitoring chip.210 211 This driver can also be built as a module. If so, the module212 will be called adt7411.213 214config SENSORS_ADT7462215 tristate "Analog Devices ADT7462"216 depends on I2C217 help218 If you say yes here you get support for the Analog Devices219 ADT7462 temperature monitoring chips.220 221 This driver can also be built as a module. If so, the module222 will be called adt7462.223 224config SENSORS_ADT7470225 tristate "Analog Devices ADT7470"226 depends on I2C227 select REGMAP_I2C228 help229 If you say yes here you get support for the Analog Devices230 ADT7470 temperature monitoring chips.231 232 This driver can also be built as a module. If so, the module233 will be called adt7470.234 235config SENSORS_ADT7475236 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"237 depends on I2C238 select HWMON_VID239 help240 If you say yes here you get support for the Analog Devices241 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring242 chips.243 244 This driver can also be built as a module. If so, the module245 will be called adt7475.246 247config SENSORS_AHT10248 tristate "Aosong AHT10, AHT20"249 depends on I2C250 select CRC8251 help252 If you say yes here, you get support for the Aosong AHT10 and AHT20253 temperature and humidity sensors254 255 This driver can also be built as a module. If so, the module256 will be called aht10.257 258config SENSORS_AQUACOMPUTER_D5NEXT259 tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next"260 depends on USB_HID261 select CRC16262 help263 If you say yes here you get support for sensors and fans of264 the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan265 controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow266 Next sensor, where available.267 268 This driver can also be built as a module. If so, the module269 will be called aquacomputer_d5next.270 271config SENSORS_AS370272 tristate "Synaptics AS370 SoC hardware monitoring driver"273 help274 If you say yes here you get support for the PVT sensors of275 the Synaptics AS370 SoC276 277 This driver can also be built as a module. If so, the module278 will be called as370-hwmon.279 280 281config SENSORS_ASC7621282 tristate "Andigilog aSC7621"283 depends on I2C284 help285 If you say yes here you get support for the aSC7621286 family of SMBus sensors chip found on most Intel X38, X48, X58,287 945, 965 and 975 desktop boards. Currently supported chips:288 aSC7621289 aSC7621a290 291 This driver can also be built as a module. If so, the module292 will be called asc7621.293 294config SENSORS_ASUS_ROG_RYUJIN295 tristate "ASUS ROG RYUJIN II 360 hardware monitoring driver"296 depends on HID297 help298 If you say yes here you get support for the fans and sensors of299 the ASUS ROG RYUJIN II 360 AIO CPU liquid cooler.300 301 This driver can also be built as a module. If so, the module302 will be called asus_rog_ryujin.303 304config SENSORS_AXI_FAN_CONTROL305 tristate "Analog Devices FAN Control HDL Core driver"306 help307 If you say yes here you get support for the Analog Devices308 AXI HDL FAN monitoring core.309 310 This driver can also be built as a module. If so, the module311 will be called axi-fan-control312 313config SENSORS_K8TEMP314 tristate "AMD Athlon64/FX or Opteron temperature sensor"315 depends on X86 && PCI316 help317 If you say yes here you get support for the temperature318 sensor(s) inside your CPU. Supported is whole AMD K8319 microarchitecture. Please note that you will need at least320 lm-sensors 2.10.1 for proper userspace support.321 322 This driver can also be built as a module. If so, the module323 will be called k8temp.324 325config SENSORS_K10TEMP326 tristate "AMD Family 10h+ temperature sensor"327 depends on X86 && PCI && AMD_NB328 help329 If you say yes here you get support for the temperature330 sensor(s) inside your CPU. Supported are later revisions of331 the AMD Family 10h and all revisions of the AMD Family 11h,332 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo)333 and 16h (Kabini/Mullins) microarchitectures.334 335 This driver can also be built as a module. If so, the module336 will be called k10temp.337 338config SENSORS_FAM15H_POWER339 tristate "AMD Family 15h processor power"340 depends on X86 && PCI && CPU_SUP_AMD341 help342 If you say yes here you get support for processor power343 information of your AMD family 15h CPU.344 345 This driver can also be built as a module. If so, the module346 will be called fam15h_power.347 348config SENSORS_APPLESMC349 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"350 depends on INPUT && X86351 select NEW_LEDS352 select LEDS_CLASS353 help354 This driver provides support for the Apple System Management355 Controller, which provides an accelerometer (Apple Sudden Motion356 Sensor), light sensors, temperature sensors, keyboard backlight357 control and fan control.358 359 Only Intel-based Apple's computers are supported (MacBook Pro,360 MacBook, MacMini).361 362 Data from the different sensors, keyboard backlight control and fan363 control are accessible via sysfs.364 365 This driver also provides an absolute input class device, allowing366 the laptop to act as a pinball machine-esque joystick.367 368 Say Y here if you have an applicable laptop and want to experience369 the awesome power of applesmc.370 371config SENSORS_ARM_SCMI372 tristate "ARM SCMI Sensors"373 depends on ARM_SCMI_PROTOCOL374 depends on THERMAL || !THERMAL_OF375 help376 This driver provides support for temperature, voltage, current377 and power sensors available on SCMI based platforms. The actual378 number and type of sensors exported depend on the platform.379 380 This driver can also be built as a module. If so, the module381 will be called scmi-hwmon.382 383config SENSORS_ARM_SCPI384 tristate "ARM SCPI Sensors"385 depends on ARM_SCPI_PROTOCOL386 depends on THERMAL || !THERMAL_OF387 help388 This driver provides support for temperature, voltage, current389 and power sensors available on ARM Ltd's SCP based platforms. The390 actual number and type of sensors exported depend on the platform.391 392config SENSORS_ASB100393 tristate "Asus ASB100 Bach"394 depends on (X86 || COMPILE_TEST) && I2C395 select HWMON_VID396 help397 If you say yes here you get support for the ASB100 Bach sensor398 chip found on some Asus mainboards.399 400 This driver can also be built as a module. If so, the module401 will be called asb100.402 403config SENSORS_ASPEED404 tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver"405 depends on ARCH_ASPEED || COMPILE_TEST406 depends on THERMAL || THERMAL=n407 select REGMAP408 help409 This driver provides support for ASPEED AST2400/AST2500 PWM410 and Fan Tacho controllers.411 412 This driver can also be built as a module. If so, the module413 will be called aspeed_pwm_tacho.414 415config SENSORS_ASPEED_G6416 tristate "ASPEED g6 PWM and Fan tach driver"417 depends on ARCH_ASPEED || COMPILE_TEST418 depends on PWM419 help420 This driver provides support for ASPEED G6 PWM and Fan Tach421 controllers.422 423 This driver can also be built as a module. If so, the module424 will be called aspeed_pwm_tacho.425 426config SENSORS_ATXP1427 tristate "Attansic ATXP1 VID controller"428 depends on I2C429 select HWMON_VID430 help431 If you say yes here you get support for the Attansic ATXP1 VID432 controller.433 434 If your board have such a chip, you are able to control your CPU435 core and other voltages.436 437 This driver can also be built as a module. If so, the module438 will be called atxp1.439 440config SENSORS_BT1_PVT441 tristate "Baikal-T1 Process, Voltage, Temperature sensor driver"442 depends on MIPS_BAIKAL_T1 || COMPILE_TEST443 select POLYNOMIAL444 help445 If you say yes here you get support for Baikal-T1 PVT sensor446 embedded into the SoC.447 448 This driver can also be built as a module. If so, the module will be449 called bt1-pvt.450 451config SENSORS_BT1_PVT_ALARMS452 bool "Enable Baikal-T1 PVT sensor alarms"453 depends on SENSORS_BT1_PVT454 help455 Baikal-T1 PVT IP-block provides threshold registers for each456 supported sensor. But the corresponding interrupts might be457 generated by the thresholds comparator only in synchronization with458 a data conversion. Additionally there is only one sensor data can459 be converted at a time. All of these makes the interface impossible460 to be used for the hwmon alarms implementation without periodic461 switch between the PVT sensors. By default the data conversion is462 performed on demand from the user-space. If this config is enabled463 the data conversion will be periodically performed and the data will be464 saved in the internal driver cache.465 466config SENSORS_CHIPCAP2467 tristate "Amphenol ChipCap 2 relative humidity and temperature sensor"468 depends on I2C469 help470 Say yes here to build support for the Amphenol ChipCap 2471 relative humidity and temperature sensor.472 473 To compile this driver as a module, choose M here: the module474 will be called chipcap2.475 476config SENSORS_CORSAIR_CPRO477 tristate "Corsair Commander Pro controller"478 depends on HID479 help480 If you say yes here you get support for the Corsair Commander Pro481 controller.482 483 This driver can also be built as a module. If so, the module484 will be called corsair-cpro.485 486config SENSORS_CORSAIR_PSU487 tristate "Corsair PSU HID controller"488 depends on HID489 help490 If you say yes here you get support for Corsair PSUs with a HID491 interface.492 Currently this driver supports the (RM/HX)550i, (RM/HX)650i,493 (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies494 by Corsair.495 496 This driver can also be built as a module. If so, the module497 will be called corsair-psu.498 499config SENSORS_CROS_EC500 tristate "ChromeOS Embedded Controller sensors"501 depends on MFD_CROS_EC_DEV502 default MFD_CROS_EC_DEV503 help504 If you say yes here you get support for ChromeOS Embedded Controller505 sensors.506 507 This driver can also be built as a module. If so, the module508 will be called cros_ec_hwmon.509 510config SENSORS_DRIVETEMP511 tristate "Hard disk drives with temperature sensors"512 depends on SCSI && ATA513 help514 If you say yes you get support for the temperature sensor on515 hard disk drives.516 517 This driver can also be built as a module. If so, the module518 will be called drivetemp.519 520config SENSORS_DS620521 tristate "Dallas Semiconductor DS620"522 depends on I2C523 help524 If you say yes here you get support for Dallas Semiconductor525 DS620 sensor chip.526 527 This driver can also be built as a module. If so, the module528 will be called ds620.529 530config SENSORS_DS1621531 tristate "Dallas Semiconductor DS1621 and compatibles"532 depends on I2C533 help534 If you say yes here you get support for Dallas Semiconductor/Maxim535 Integrated DS1621 sensor chips and compatible models including:536 537 - Dallas Semiconductor DS1625538 - Maxim Integrated DS1631539 - Maxim Integrated DS1721540 - Maxim Integrated DS1731541 542 This driver can also be built as a module. If so, the module543 will be called ds1621.544 545config SENSORS_DELL_SMM546 tristate "Dell laptop SMM BIOS hwmon driver"547 depends on ACPI_WMI548 depends on X86549 imply THERMAL550 help551 This hwmon driver adds support for reporting temperature of different552 sensors and controls the fans on Dell laptops via System Management553 Mode provided by Dell BIOS.554 555 When option I8K is also enabled this driver provides legacy /proc/i8k556 userspace interface for i8kutils package.557 558config I8K559 bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver"560 depends on SENSORS_DELL_SMM561 depends on PROC_FS562 help563 This option enables the legacy /proc/i8k userspace interface of the564 dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS565 version, temperatures and allows control of fan speeds of some Dell566 laptops. Sometimes it also reports power and hotkey status.567 568 This interface is required to run programs from the i8kutils package.569 570 Say Y if you intend to run userspace programs that use this interface.571 Say N otherwise.572 573config SENSORS_DA9052_ADC574 tristate "Dialog DA9052/DA9053 ADC"575 depends on PMIC_DA9052576 help577 Say y here to support the ADC found on Dialog Semiconductor578 DA9052-BC and DA9053-AA/Bx PMICs.579 580 This driver can also be built as module. If so, the module581 will be called da9052-hwmon.582 583config SENSORS_DA9055584 tristate "Dialog Semiconductor DA9055 ADC"585 depends on MFD_DA9055586 help587 If you say yes here you get support for ADC on the Dialog588 Semiconductor DA9055 PMIC.589 590 This driver can also be built as a module. If so, the module591 will be called da9055-hwmon.592 593config SENSORS_I5K_AMB594 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"595 depends on PCI596 help597 If you say yes here you get support for FB-DIMM AMB temperature598 monitoring chips on systems with the Intel 5000 series chipset.599 600 This driver can also be built as a module. If so, the module601 will be called i5k_amb.602 603config SENSORS_SPARX5604 tristate "Sparx5 SoC temperature sensor"605 depends on ARCH_SPARX5 || COMPILE_TEST606 help607 If you say yes here you get support for temperature monitoring608 with the Microchip Sparx5 SoC.609 610 This driver can also be built as a module. If so, the module611 will be called sparx5-temp.612 613config SENSORS_F71805F614 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"615 depends on HAS_IOPORT616 depends on !PPC617 help618 If you say yes here you get support for hardware monitoring619 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG620 Super-I/O chips.621 622 This driver can also be built as a module. If so, the module623 will be called f71805f.624 625config SENSORS_F71882FG626 tristate "Fintek F71882FG and compatibles"627 depends on HAS_IOPORT628 depends on !PPC629 help630 If you say yes here you get support for hardware monitoring631 features of many Fintek Super-I/O (LPC) chips. The currently632 supported chips are:633 F71808E/A634 F71858FG635 F71862FG636 F71863FG637 F71869F/E/A638 F71882FG639 F71883FG640 F71889FG/ED/A641 F8000642 F81801U643 F81865F644 645 This driver can also be built as a module. If so, the module646 will be called f71882fg.647 648config SENSORS_F75375S649 tristate "Fintek F75375S/SP, F75373 and F75387"650 depends on I2C651 help652 If you say yes here you get support for hardware monitoring653 features of the Fintek F75375S/SP, F75373 and F75387654 655 This driver can also be built as a module. If so, the module656 will be called f75375s.657 658config SENSORS_GSC659 tristate "Gateworks System Controller ADC"660 depends on MFD_GATEWORKS_GSC661 help662 Support for the Gateworks System Controller A/D converters.663 664 To compile this driver as a module, choose M here:665 the module will be called gsc-hwmon.666 667config SENSORS_MC13783_ADC668 tristate "Freescale MC13783/MC13892 ADC"669 depends on MFD_MC13XXX670 help671 Support for the A/D converter on MC13783 and MC13892 PMIC.672 673config SENSORS_FSCHMD674 tristate "Fujitsu Siemens Computers sensor chips"675 depends on (X86 || COMPILE_TEST) && I2C676 help677 If you say yes here you get support for the following Fujitsu678 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,679 Heimdall, Heracles, Hades and Syleus including support for the680 integrated watchdog.681 682 This is a merged driver for FSC sensor chips replacing the fscpos,683 fscscy and fscher drivers and adding support for several other FSC684 sensor chips.685 686 This driver can also be built as a module. If so, the module687 will be called fschmd.688 689config SENSORS_FTSTEUTATES690 tristate "Fujitsu Technology Solutions sensor chip Teutates"691 depends on I2C && WATCHDOG692 select WATCHDOG_CORE693 help694 If you say yes here you get support for the Fujitsu Technology695 Solutions (FTS) sensor chip "Teutates" including support for696 the integrated watchdog.697 698 This driver can also be built as a module. If so, the module699 will be called ftsteutates.700 701config SENSORS_GIGABYTE_WATERFORCE702 tristate "Gigabyte Waterforce X240/X280/X360 AIO CPU coolers"703 depends on USB_HID704 help705 If you say yes here you get support for hardware monitoring for the706 Gigabyte Waterforce X240/X280/X360 all-in-one CPU liquid coolers.707 708 This driver can also be built as a module. If so, the module709 will be called gigabyte_waterforce.710 711config SENSORS_GL518SM712 tristate "Genesys Logic GL518SM"713 depends on I2C714 help715 If you say yes here you get support for Genesys Logic GL518SM716 sensor chips.717 718 This driver can also be built as a module. If so, the module719 will be called gl518sm.720 721config SENSORS_GL520SM722 tristate "Genesys Logic GL520SM"723 depends on I2C724 select HWMON_VID725 help726 If you say yes here you get support for Genesys Logic GL520SM727 sensor chips.728 729 This driver can also be built as a module. If so, the module730 will be called gl520sm.731 732config SENSORS_G760A733 tristate "GMT G760A"734 depends on I2C735 help736 If you say yes here you get support for Global Mixed-mode737 Technology Inc G760A fan speed PWM controller chips.738 739 This driver can also be built as a module. If so, the module740 will be called g760a.741 742config SENSORS_G762743 tristate "GMT G762 and G763"744 depends on I2C745 help746 If you say yes here you get support for Global Mixed-mode747 Technology Inc G762 and G763 fan speed PWM controller chips.748 749 This driver can also be built as a module. If so, the module750 will be called g762.751 752config SENSORS_GPIO_FAN753 tristate "GPIO fan"754 depends on OF_GPIO755 depends on GPIOLIB || COMPILE_TEST756 depends on THERMAL || THERMAL=n757 help758 If you say yes here you get support for fans connected to GPIO lines.759 760 This driver can also be built as a module. If so, the module761 will be called gpio-fan.762 763config SENSORS_GXP_FAN_CTRL764 tristate "HPE GXP fan controller"765 depends on ARCH_HPE_GXP || COMPILE_TEST766 help767 If you say yes here you get support for GXP fan control functionality.768 769 The GXP controls fan function via the CPLD through the use of PWM770 registers. This driver reports status and pwm setting of the fans.771 772config SENSORS_HIH6130773 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"774 depends on I2C775 help776 If you say yes here you get support for Honeywell Humidicon777 HIH-6130 and HIH-6131 Humidicon humidity sensors.778 779 This driver can also be built as a module. If so, the module780 will be called hih6130.781 782config SENSORS_HS3001783 tristate "Renesas HS3001 humidity and temperature sensors"784 depends on I2C785 help786 If you say yes here you get support for the Renesas HS3001,787 to HS3004 humidity and temperature sensors.788 789 This driver can also be built as a module. If so, the module790 will be called hs3001.791 792config SENSORS_IBMAEM793 tristate "IBM Active Energy Manager temperature/power sensors and control"794 select IPMI_SI795 depends on IPMI_HANDLER796 help797 If you say yes here you get support for the temperature and798 power sensors and capping hardware in various IBM System X799 servers that support Active Energy Manager. This includes800 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,801 and certain HC10/HS2x/LS2x/QS2x blades.802 803 This driver can also be built as a module. If so, the module804 will be called ibmaem.805 806config SENSORS_IBMPEX807 tristate "IBM PowerExecutive temperature/power sensors"808 select IPMI_SI809 depends on IPMI_HANDLER810 help811 If you say yes here you get support for the temperature and812 power sensors in various IBM System X servers that support813 PowerExecutive. So far this includes the x3350, x3550, x3650,814 x3655, and x3755; the x3800, x3850, and x3950 models that have815 PCI Express; and some of the HS2x, LS2x, and QS2x blades.816 817 This driver can also be built as a module. If so, the module818 will be called ibmpex.819 820config SENSORS_IBMPOWERNV821 tristate "IBM POWERNV platform sensors"822 depends on PPC_POWERNV823 default y824 help825 If you say yes here you get support for the temperature/fan/power826 sensors on your PowerNV platform.827 828 This driver can also be built as a module. If so, the module829 will be called ibmpowernv.830 831config SENSORS_IIO_HWMON832 tristate "Hwmon driver that uses channels specified via iio maps"833 depends on IIO834 help835 This is a platform driver that in combination with a suitable836 map allows IIO devices to provide basic hwmon functionality837 for those channels specified in the map. This map can be provided838 either via platform data or the device tree bindings.839 840config SENSORS_I5500841 tristate "Intel 5500/5520/X58 temperature sensor"842 depends on X86 && PCI843 help844 If you say yes here you get support for the temperature845 sensor inside the Intel 5500, 5520 and X58 chipsets.846 847 This driver can also be built as a module. If so, the module848 will be called i5500_temp.849 850config SENSORS_CORETEMP851 tristate "Intel Core/Core2/Atom temperature sensor"852 depends on X86853 help854 If you say yes here you get support for the temperature855 sensor inside your CPU. Most of the family 6 CPUs856 are supported. Check Documentation/hwmon/coretemp.rst for details.857 858config SENSORS_IT87859 tristate "ITE IT87xx and compatibles"860 depends on HAS_IOPORT861 depends on !PPC862 select HWMON_VID863 help864 If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F,865 IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E,866 IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,867 IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950868 clone.869 870 This driver can also be built as a module. If so, the module871 will be called it87.872 873config SENSORS_JC42874 tristate "JEDEC JC42.4 compliant memory module temperature sensors"875 depends on I2C876 select REGMAP_I2C877 help878 If you say yes here, you get support for JEDEC JC42.4 compliant879 temperature sensors, which are used on many DDR3 memory modules for880 mobile devices and servers. Support will include, but not be limited881 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,882 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98,883 STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.884 885 This driver can also be built as a module. If so, the module886 will be called jc42.887 888config SENSORS_POWERZ889 tristate "ChargerLAB POWER-Z USB-C tester"890 depends on USB891 help892 If you say yes here you get support for ChargerLAB POWER-Z series of893 USB-C charging testers.894 895 This driver can also be built as a module. If so, the module896 will be called powerz.897 898config SENSORS_POWR1220899 tristate "Lattice POWR1220 Power Monitoring"900 depends on I2C901 help902 If you say yes here you get access to the hardware monitoring903 functions of the Lattice POWR1220 isp Power Supply Monitoring,904 Sequencing and Margining Controller.905 906 This driver can also be built as a module. If so, the module907 will be called powr1220.908 909config SENSORS_LAN966X910 tristate "Microchip LAN966x Hardware Monitoring"911 depends on SOC_LAN966 || COMPILE_TEST912 select REGMAP913 select POLYNOMIAL914 help915 If you say yes here you get support for temperature monitoring916 on the Microchip LAN966x SoC.917 918 This driver can also be built as a module. If so, the module919 will be called lan966x-hwmon.920 921config SENSORS_LENOVO_EC922 tristate "Sensor reader for Lenovo ThinkStations"923 depends on X86924 help925 If you say yes here you get support for LENOVO926 EC Sensor data on newer ThinkStation systems927 928 This driver can also be built as a module. If so, the module929 will be called lenovo_ec_sensors.930 931config SENSORS_LINEAGE932 tristate "Lineage Compact Power Line Power Entry Module"933 depends on I2C934 help935 If you say yes here you get support for the Lineage Compact Power Line936 series of DC/DC and AC/DC converters such as CP1800, CP2000AC,937 CP2000DC, CP2725, and others.938 939 This driver can also be built as a module. If so, the module940 will be called lineage-pem.941 942config SENSORS_LOCHNAGAR943 tristate "Lochnagar Hardware Monitor"944 depends on MFD_LOCHNAGAR945 help946 If you say yes here you get support for Lochnagar 2 temperature,947 voltage and current sensors abilities.948 949 This driver can also be built as a module. If so, the module950 will be called lochnagar-hwmon.951 952config SENSORS_LTC2945953 tristate "Linear Technology LTC2945"954 depends on I2C955 select REGMAP_I2C956 help957 If you say yes here you get support for Linear Technology LTC2945958 I2C System Monitor.959 960 This driver can also be built as a module. If so, the module will961 be called ltc2945.962 963config SENSORS_LTC2947964 tristate965 966config SENSORS_LTC2947_I2C967 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C"968 depends on I2C969 select REGMAP_I2C970 select SENSORS_LTC2947971 help972 If you say yes here you get support for Linear Technology LTC2947973 I2C High Precision Power and Energy Monitor974 975 This driver can also be built as a module. If so, the module will976 be called ltc2947-i2c.977 978config SENSORS_LTC2947_SPI979 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI"980 depends on SPI_MASTER981 select REGMAP_SPI982 select SENSORS_LTC2947983 help984 If you say yes here you get support for Linear Technology LTC2947985 SPI High Precision Power and Energy Monitor986 987 This driver can also be built as a module. If so, the module will988 be called ltc2947-spi.989 990config SENSORS_LTC2990991 tristate "Linear Technology LTC2990"992 depends on I2C993 help994 If you say yes here you get support for Linear Technology LTC2990995 I2C System Monitor. The LTC2990 supports a combination of voltage,996 current and temperature monitoring.997 998 This driver can also be built as a module. If so, the module will999 be called ltc2990.1000 1001config SENSORS_LTC29911002 tristate "Analog Devices LTC2991"1003 depends on I2C1004 select REGMAP_I2C1005 help1006 If you say yes here you get support for Analog Devices LTC29911007 Octal I2C Voltage, Current, and Temperature Monitor. The LTC29911008 supports a combination of voltage, current and temperature monitoring.1009 1010 This driver can also be built as a module. If so, the module will1011 be called ltc2991.1012 1013config SENSORS_LTC29921014 tristate "Linear Technology LTC2992"1015 depends on I2C1016 depends on GPIOLIB1017 help1018 If you say yes here you get support for Linear Technology LTC29921019 I2C System Monitor. The LTC2992 measures current, voltage, and1020 power of two supplies.1021 1022 This driver can also be built as a module. If so, the module will1023 be called ltc2992.1024 1025config SENSORS_LTC41511026 tristate "Linear Technology LTC4151"1027 depends on I2C1028 help1029 If you say yes here you get support for Linear Technology LTC41511030 High Voltage I2C Current and Voltage Monitor interface.1031 1032 This driver can also be built as a module. If so, the module will1033 be called ltc4151.1034 1035config SENSORS_LTC42151036 tristate "Linear Technology LTC4215"1037 depends on I2C1038 help1039 If you say yes here you get support for Linear Technology LTC42151040 Hot Swap Controller I2C interface.1041 1042 This driver can also be built as a module. If so, the module will1043 be called ltc4215.1044 1045config SENSORS_LTC42221046 tristate "Linear Technology LTC4222"1047 depends on I2C1048 select REGMAP_I2C1049 help1050 If you say yes here you get support for Linear Technology LTC42221051 Dual Hot Swap Controller I2C interface.1052 1053 This driver can also be built as a module. If so, the module will1054 be called ltc4222.1055 1056config SENSORS_LTC42451057 tristate "Linear Technology LTC4245"1058 depends on I2C1059 help1060 If you say yes here you get support for Linear Technology LTC42451061 Multiple Supply Hot Swap Controller I2C interface.1062 1063 This driver can also be built as a module. If so, the module will1064 be called ltc4245.1065 1066config SENSORS_LTC42601067 tristate "Linear Technology LTC4260"1068 depends on I2C1069 select REGMAP_I2C1070 help1071 If you say yes here you get support for Linear Technology LTC42601072 Positive Voltage Hot Swap Controller I2C interface.1073 1074 This driver can also be built as a module. If so, the module will1075 be called ltc4260.1076 1077config SENSORS_LTC42611078 tristate "Linear Technology LTC4261"1079 depends on I2C1080 help1081 If you say yes here you get support for Linear Technology LTC42611082 Negative Voltage Hot Swap Controller I2C interface.1083 1084 This driver can also be built as a module. If so, the module will1085 be called ltc4261.1086 1087config SENSORS_LTC42821088 tristate "Analog Devices LTC4282"1089 depends on I2C1090 select REGMAP_I2C1091 help1092 If you say yes here you get support for Analog Devices LTC42821093 High Current Hot Swap Controller I2C interface.1094 1095 This driver can also be built as a module. If so, the module will1096 be called ltc4282.1097 1098config SENSORS_LTQ_CPUTEMP1099 bool "Lantiq cpu temperature sensor driver"1100 depends on SOC_XWAY1101 help1102 If you say yes here you get support for the temperature1103 sensor inside your CPU.1104 1105config SENSORS_MAX11111106 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"1107 depends on SPI_MASTER1108 help1109 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX11131110 ADC chips.1111 1112 This driver can also be built as a module. If so, the module1113 will be called max1111.1114 1115config SENSORS_MAX1271116 tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System"1117 depends on I2C1118 help1119 Say y here to support Maxim's MAX127 DAS chips.1120 1121 This driver can also be built as a module. If so, the module1122 will be called max127.1123 1124config SENSORS_MAX160651125 tristate "Maxim MAX16065 System Manager and compatibles"1126 depends on I2C1127 help1128 If you say yes here you get support for hardware monitoring1129 capabilities of the following Maxim System Manager chips.1130 MAX160651131 MAX160661132 MAX160671133 MAX160681134 MAX160701135 MAX160711136 1137 This driver can also be built as a module. If so, the module1138 will be called max16065.1139 1140config SENSORS_MAX16191141 tristate "Maxim MAX1619 sensor chip"1142 depends on I2C1143 help1144 If you say yes here you get support for MAX1619 sensor chip.1145 1146 This driver can also be built as a module. If so, the module1147 will be called max1619.1148 1149config SENSORS_MAX16681150 tristate "Maxim MAX1668 and compatibles"1151 depends on I2C1152 select REGMAP_I2C1153 help1154 If you say yes here you get support for MAX1668, MAX1989 and1155 MAX1805 chips.1156 1157 This driver can also be built as a module. If so, the module1158 will be called max1668.1159 1160config SENSORS_MAX1971161 tristate "Maxim MAX197 and compatibles"1162 help1163 Support for the Maxim MAX197 A/D converter.1164 Support will include, but not be limited to, MAX197, and MAX199.1165 1166 This driver can also be built as a module. If so, the module1167 will be called max197.1168 1169config SENSORS_MAX317221170 tristate "MAX31722 temperature sensor"1171 depends on SPI1172 help1173 Support for the Maxim Integrated MAX31722/MAX31723 digital1174 thermometers/thermostats operating over an SPI interface.1175 1176 This driver can also be built as a module. If so, the module1177 will be called max31722.1178 1179config SENSORS_MAX317301180 tristate "MAX31730 temperature sensor"1181 depends on I2C1182 help1183 Support for the Maxim Integrated MAX31730 3-Channel Remote1184 Temperature Sensor.1185 1186 This driver can also be built as a module. If so, the module1187 will be called max31730.1188 1189config SENSORS_MAX317601190 tristate "MAX31760 fan speed controller"1191 depends on I2C1192 select REGMAP_I2C1193 help1194 Support for the Analog Devices MAX31760 Precision Fan-Speed1195 Controller. MAX31760 integrates temperature sensing along with1196 precision PWM fan control.1197 1198 This driver can also be built as a module. If so, the module1199 will be called max31760.1200 1201config MAX318271202 tristate "MAX31827 low-power temperature switch and similar devices"1203 depends on I2C1204 select REGMAP_I2C1205 help1206 If you say yes here you get support for MAX31827, MAX31828 and1207 MAX31829 low-power temperature switches and sensors connected with I2C.1208 1209 This driver can also be built as a module. If so, the module1210 will be called max31827.1211 1212config SENSORS_MAX66201213 tristate "Maxim MAX6620 fan controller"1214 depends on I2C1215 help1216 If you say yes here you get support for the MAX66201217 fan controller.1218 1219 This driver can also be built as a module. If so, the module1220 will be called max6620.1221 1222config SENSORS_MAX66211223 tristate "Maxim MAX6621 sensor chip"1224 depends on I2C1225 select REGMAP_I2C1226 help1227 If you say yes here you get support for MAX6621 sensor chip.1228 MAX6621 is a PECI-to-I2C translator provides an efficient,1229 low-cost solution for PECI-to-SMBus/I2C protocol conversion.1230 It allows reading the temperature from the PECI-compliant1231 host directly from up to four PECI-enabled CPUs.1232 1233 This driver can also be built as a module. If so, the module1234 will be called max6621.1235 1236config SENSORS_MAX66391237 tristate "Maxim MAX6639 sensor chip"1238 depends on I2C1239 select REGMAP_I2C1240 help1241 If you say yes here you get support for the MAX66391242 sensor chips.1243 1244 This driver can also be built as a module. If so, the module1245 will be called max6639.1246 1247config SENSORS_MAX66501248 tristate "Maxim MAX6650 sensor chip"1249 depends on I2C1250 depends on THERMAL || THERMAL=n1251 help1252 If you say yes here you get support for the MAX6650 / MAX66511253 sensor chips.1254 1255 This driver can also be built as a module. If so, the module1256 will be called max6650.1257 1258config SENSORS_MAX66971259 tristate "Maxim MAX6697 and compatibles"1260 depends on I2C1261 help1262 If you say yes here you get support for MAX6581, MAX6602, MAX6622,1263 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX66991264 temperature sensor chips.1265 1266 This driver can also be built as a module. If so, the module1267 will be called max6697.1268 1269config SENSORS_MAX317901270 tristate "Maxim MAX31790 sensor chip"1271 depends on I2C1272 help1273 If you say yes here you get support for 6-Channel PWM-Output1274 Fan RPM Controller.1275 1276 This driver can also be built as a module. If so, the module1277 will be called max31790.1278 1279config SENSORS_MC34VR5001280 tristate "NXP MC34VR500 hardware monitoring driver"1281 depends on I2C1282 select REGMAP_I2C1283 help1284 If you say yes here you get support for the temperature and input1285 voltage sensors of the NXP MC34VR500.1286 1287config SENSORS_MCP30211288 tristate "Microchip MCP3021 and compatibles"1289 depends on I2C1290 help1291 If you say yes here you get support for MCP3021 and MCP3221.1292 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP32211293 with 12-bit resolution.1294 1295 This driver can also be built as a module. If so, the module1296 will be called mcp3021.1297 1298config SENSORS_MLXREG_FAN1299 tristate "Mellanox FAN driver"1300 depends on MELLANOX_PLATFORM1301 imply THERMAL1302 select REGMAP1303 help1304 This option enables support for the FAN control on the Mellanox1305 Ethernet and InfiniBand switches. The driver can be activated by the1306 platform device add call. Say Y to enable these. To compile this1307 driver as a module, choose 'M' here: the module will be called1308 mlxreg-fan.1309 1310config SENSORS_TC6541311 tristate "Microchip TC654/TC655 and compatibles"1312 depends on I2C1313 help1314 If you say yes here you get support for TC654 and TC655.1315 The TC654 and TC655 are PWM mode fan speed controllers with1316 FanSense technology for use with brushless DC fans.1317 1318 This driver can also be built as a module. If so, the module1319 will be called tc654.1320 1321config SENSORS_TPS238611322 tristate "Texas Instruments TPS23861 PoE PSE"1323 depends on I2C1324 select REGMAP_I2C1325 help1326 If you say yes here you get support for Texas Instruments1327 TPS23861 802.3at PoE PSE chips.1328 1329 This driver can also be built as a module. If so, the module1330 will be called tps23861.1331 1332config SENSORS_MENF21BMC_HWMON1333 tristate "MEN 14F021P00 BMC Hardware Monitoring"1334 depends on MFD_MENF21BMC1335 help1336 Say Y here to include support for the MEN 14F021P00 BMC1337 hardware monitoring.1338 1339 This driver can also be built as a module. If so the module1340 will be called menf21bmc_hwmon.1341 1342config SENSORS_MR752031343 tristate "Moortec Semiconductor MR75203 PVT Controller"1344 select REGMAP_MMIO1345 help1346 If you say yes here you get support for Moortec MR752031347 PVT controller.1348 1349 This driver can also be built as a module. If so, the module1350 will be called mr75203.1351 1352config SENSORS_ADCXX1353 tristate "National Semiconductor ADCxxxSxxx"1354 depends on SPI_MASTER1355 help1356 If you say yes here you get support for the National Semiconductor1357 ADC<bb><c>S<sss> chip family, where1358 * bb is the resolution in number of bits (8, 10, 12)1359 * c is the number of channels (1, 2, 4, 8)1360 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 5001361 kSPS and 101 for 1 MSPS)1362 1363 Examples : ADC081S101, ADC124S501, ...1364 1365 This driver can also be built as a module. If so, the module1366 will be called adcxx.1367 1368config SENSORS_LM631369 tristate "National Semiconductor LM63 and compatibles"1370 depends on I2C1371 help1372 If you say yes here you get support for the National1373 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature1374 sensors with integrated fan control. Such chips are found1375 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among1376 others.1377 1378 This driver can also be built as a module. If so, the module1379 will be called lm63.1380 1381config SENSORS_LM701382 tristate "National Semiconductor LM70 and compatibles"1383 depends on SPI_MASTER1384 help1385 If you say yes here you get support for the National Semiconductor1386 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124,1387 TMP125 digital temperature sensor chips.1388 1389 This driver can also be built as a module. If so, the module1390 will be called lm70.1391 1392config SENSORS_LM731393 tristate "National Semiconductor LM73"1394 depends on I2C1395 help1396 If you say yes here you get support for National Semiconductor LM731397 sensor chips.1398 This driver can also be built as a module. If so, the module1399 will be called lm73.1400 1401config SENSORS_LM751402 tristate "National Semiconductor LM75 and compatibles"1403 depends on I2C1404 select REGMAP_I2C1405 help1406 If you say yes here you get support for one common type of1407 temperature sensor chip, with models including:1408 1409 - Analog Devices ADT751410 - Atmel (now Microchip) AT30TS741411 - Dallas Semiconductor DS75, DS1775 and DS75051412 - Global Mixed-mode Technology (GMT) G7511413 - Maxim MAX6625 and MAX66261414 - Microchip MCP980x1415 - National Semiconductor LM75, LM75A1416 - NXP's LM75A1417 - ST Microelectronics STDS751418 - ST Microelectronics STLM751419 - TelCom (now Microchip) TCN751420 - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75,1421 TMP175, TMP2751422 1423 This driver supports driver model based binding through board1424 specific I2C device tables.1425 1426 It also supports the "legacy" style of driver binding. To use1427 that with some chips which don't replicate LM75 quirks exactly,1428 you may need the "force" module parameter.1429 1430 This driver can also be built as a module. If so, the module1431 will be called lm75.1432 1433config SENSORS_LM771434 tristate "National Semiconductor LM77"1435 depends on I2C1436 help1437 If you say yes here you get support for National Semiconductor LM771438 sensor chips.1439 1440 This driver can also be built as a module. If so, the module1441 will be called lm77.1442 1443config SENSORS_LM781444 tristate "National Semiconductor LM78 and compatibles"1445 depends on I2C1446 select HWMON_VID1447 help1448 If you say yes here you get support for National Semiconductor LM78,1449 LM78-J and LM79.1450 1451 This driver can also be built as a module. If so, the module1452 will be called lm78.1453 1454config SENSORS_LM801455 tristate "National Semiconductor LM80 and LM96080"1456 depends on I2C1457 help1458 If you say yes here you get support for National Semiconductor1459 LM80 and LM96080 sensor chips.1460 1461 This driver can also be built as a module. If so, the module1462 will be called lm80.1463 1464config SENSORS_LM831465 tristate "National Semiconductor LM83 and compatibles"1466 depends on I2C1467 select REGMAP1468 help1469 If you say yes here you get support for National Semiconductor1470 LM82 and LM83 sensor chips.1471 1472 This driver can also be built as a module. If so, the module1473 will be called lm83.1474 1475config SENSORS_LM851476 tristate "National Semiconductor LM85 and compatibles"1477 depends on I2C1478 select HWMON_VID1479 help1480 If you say yes here you get support for National Semiconductor LM851481 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,1482 EMC6D101, EMC6D102, and EMC6D103.1483 1484 This driver can also be built as a module. If so, the module1485 will be called lm85.1486 1487config SENSORS_LM871488 tristate "National Semiconductor LM87 and compatibles"1489 depends on I2C1490 select HWMON_VID1491 help1492 If you say yes here you get support for National Semiconductor LM871493 and Analog Devices ADM1024 sensor chips.1494 1495 This driver can also be built as a module. If so, the module1496 will be called lm87.1497 1498config SENSORS_LM901499 tristate "National Semiconductor LM90 and compatibles"1500 depends on I2C1501 help1502 If you say yes here you get support for National Semiconductor LM84,1503 LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A,1504 ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A,1505 Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654,1506 MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695,1507 MAX6696,1508 ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218,1509 Winbond/Nuvoton W83L771W/G/AWG/ASG,1510 Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP4611511 sensor chips.1512 1513 This driver can also be built as a module. If so, the module1514 will be called lm90.1515 1516config SENSORS_LM921517 tristate "National Semiconductor LM92 and compatibles"1518 depends on I2C1519 select REGMAP_I2C1520 help1521 If you say yes here you get support for National Semiconductor LM921522 and LM76 as well as Maxim MAX6633/6634/6635 sensor chips.1523 1524 This driver can also be built as a module. If so, the module1525 will be called lm92.1526 1527config SENSORS_LM931528 tristate "National Semiconductor LM93 and compatibles"1529 depends on I2C1530 select HWMON_VID1531 help1532 If you say yes here you get support for National Semiconductor LM93,1533 LM94, and compatible sensor chips.1534 1535 This driver can also be built as a module. If so, the module1536 will be called lm93.1537 1538config SENSORS_LM952341539 tristate "National Semiconductor LM95234 and compatibles"1540 depends on I2C1541 select REGMAP_I2C1542 help1543 If you say yes here you get support for the LM95233 and LM952341544 temperature sensor chips.1545 1546 This driver can also be built as a module. If so, the module1547 will be called lm95234.1548 1549config SENSORS_LM952411550 tristate "National Semiconductor LM95241 and compatibles"1551 depends on I2C1552 help1553 If you say yes here you get support for LM95231 and LM95241 sensor1554 chips.1555 1556 This driver can also be built as a module. If so, the module1557 will be called lm95241.1558 1559config SENSORS_LM952451560 tristate "National Semiconductor LM95245 and compatibles"1561 depends on I2C1562 select REGMAP_I2C1563 help1564 If you say yes here you get support for LM95235 and LM952451565 temperature sensor chips.1566 1567 This driver can also be built as a module. If so, the module1568 will be called lm95245.1569 1570config SENSORS_PC873601571 tristate "National Semiconductor PC87360 family"1572 depends on HAS_IOPORT1573 depends on !PPC1574 select HWMON_VID1575 help1576 If you say yes here you get access to the hardware monitoring1577 functions of the National Semiconductor PC8736x Super-I/O chips.1578 The PC87360, PC87363 and PC87364 only have fan monitoring and1579 control. The PC87365 and PC87366 additionally have voltage and1580 temperature monitoring.1581 1582 This driver can also be built as a module. If so, the module1583 will be called pc87360.1584 1585config SENSORS_PC874271586 tristate "National Semiconductor PC87427"1587 depends on HAS_IOPORT1588 depends on !PPC1589 help1590 If you say yes here you get access to the hardware monitoring1591 functions of the National Semiconductor PC87427 Super-I/O chip.1592 The chip has two distinct logical devices, one for fan speed1593 monitoring and control, and one for voltage and temperature1594 monitoring. Fan speed monitoring and control are supported, as1595 well as temperature monitoring. Voltages aren't supported yet.1596 1597 This driver can also be built as a module. If so, the module1598 will be called pc87427.1599 1600config SENSORS_NTC_THERMISTOR1601 tristate "NTC thermistor support"1602 depends on IIO1603 depends on THERMAL || !THERMAL_OF1604 help1605 This driver supports NTC thermistors sensor reading and its1606 interpretation. The driver can also monitor the temperature and1607 send notifications about the temperature.1608 1609 Currently, this driver supports1610 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,1611 NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and1612 B57891S0103 from EPCOS.1613 1614 This driver can also be built as a module. If so, the module1615 will be called ntc-thermistor.1616 1617config SENSORS_NCT66831618 tristate "Nuvoton NCT6683D"1619 depends on HAS_IOPORT1620 depends on !PPC1621 help1622 If you say yes here you get support for the hardware monitoring1623 functionality of the Nuvoton NCT6683D eSIO chip.1624 1625 This driver can also be built as a module. If so, the module1626 will be called nct6683.1627 1628config SENSORS_NCT6775_CORE1629 tristate1630 select REGMAP1631 help1632 This module contains common code shared by the platform and1633 i2c versions of the nct6775 driver; it is not useful on its1634 own.1635 1636 If built as a module, the module will be called1637 nct6775-core.1638 1639config SENSORS_NCT67751640 tristate "Platform driver for Nuvoton NCT6775F and compatibles"1641 depends on HAS_IOPORT1642 depends on !PPC1643 depends on ACPI || ACPI=n1644 select HWMON_VID1645 select SENSORS_NCT6775_CORE1646 help1647 If you say yes here you get support for the hardware monitoring1648 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,1649 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible1650 Super-I/O chips. This driver replaces the w83627ehf driver for1651 NCT6775F and NCT6776F.1652 1653 This driver can also be built as a module. If so, the module1654 will be called nct6775.1655 1656config SENSORS_NCT6775_I2C1657 tristate "I2C driver for Nuvoton NCT6775F and compatibles"1658 depends on I2C1659 select REGMAP_I2C1660 select SENSORS_NCT6775_CORE1661 help1662 If you say yes here you get support for the hardware monitoring1663 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,1664 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible1665 Super-I/O chips via their I2C interface.1666 1667 If you're not building a kernel for a BMC, this is probably1668 not the driver you want (see CONFIG_SENSORS_NCT6775).1669 1670 This driver can also be built as a module. If so, the module1671 will be called nct6775-i2c.1672 1673config SENSORS_NCT78021674 tristate "Nuvoton NCT7802Y"1675 depends on I2C1676 select REGMAP_I2C1677 help1678 If you say yes here you get support for the Nuvoton NCT7802Y1679 hardware monitoring chip.1680 1681 This driver can also be built as a module. If so, the module1682 will be called nct7802.1683 1684config SENSORS_NCT79041685 tristate "Nuvoton NCT7904"1686 depends on I2C && WATCHDOG1687 select WATCHDOG_CORE1688 help1689 If you say yes here you get support for the Nuvoton NCT79041690 hardware monitoring chip, including manual fan speed control1691 and support for the integrated watchdog.1692 1693 This driver can also be built as a module. If so, the module1694 will be called nct7904.1695 1696config SENSORS_NPCM7XX1697 tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers"1698 imply THERMAL1699 help1700 This driver provides support for Nuvoton NPCM750/730/715/705 PWM1701 and Fan controllers.1702 1703 This driver can also be built as a module. If so, the module1704 will be called npcm750-pwm-fan.1705 1706config SENSORS_NSA3201707 tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"1708 depends on GPIOLIB && OF1709 depends on MACH_KIRKWOOD || COMPILE_TEST1710 help1711 If you say yes here you get support for hardware monitoring1712 for the ZyXEL NSA320 Media Server and other compatible devices1713 (probably the NSA325 and some NSA310 variants).1714 1715 The sensor data is taken from a Holtek HT46R065 microcontroller1716 connected to GPIO lines.1717 1718 This driver can also be built as a module. If so, the module1719 will be called nsa320-hwmon.1720 1721config SENSORS_NZXT_KRAKEN21722 tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers"1723 depends on USB_HID1724 help1725 If you say yes here you get support for hardware monitoring for the1726 NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers.1727 1728 This driver can also be built as a module. If so, the module1729 will be called nzxt-kraken2.1730 1731config SENSORS_NZXT_KRAKEN31732 tristate "NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers"1733 depends on USB_HID1734 help1735 If you say yes here you get support for hardware monitoring for the1736 NZXT Kraken X53/X63/X73, Z53/Z63/Z73 all-in-one CPU liquid coolers.1737 1738 This driver can also be built as a module. If so, the module1739 will be called nzxt-kraken3.1740 1741config SENSORS_NZXT_SMART21742 tristate "NZXT RGB & Fan Controller/Smart Device v2"1743 depends on USB_HID1744 help1745 If you say yes here you get support for hardware monitoring for the1746 NZXT RGB & Fan Controller/Smart Device v2.1747 1748 This driver can also be built as a module. If so, the module1749 will be called nzxt-smart2.1750 1751source "drivers/hwmon/occ/Kconfig"1752 1753config SENSORS_OXP1754 tristate "OneXPlayer EC fan control"1755 depends on ACPI1756 depends on X861757 help1758 If you say yes here you get support for fan readings and control over1759 OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant1760 boards are supported.1761 1762 Can also be built as a module. In that case it will be called oxp-sensors.1763 1764config SENSORS_PCF85911765 tristate "Philips PCF8591 ADC/DAC"1766 depends on I2C1767 help1768 If you say yes here you get support for Philips PCF8591 4-channel1769 ADC, 1-channel DAC chips.1770 1771 This driver can also be built as a module. If so, the module1772 will be called pcf8591.1773 1774 These devices are hard to detect and rarely found on mainstream1775 hardware. If unsure, say N.1776 1777source "drivers/hwmon/peci/Kconfig"1778 1779source "drivers/hwmon/pmbus/Kconfig"1780 1781config SENSORS_PT5161L1782 tristate "Astera Labs PT5161L PCIe retimer hardware monitoring"1783 depends on I2C1784 help1785 If you say yes here you get support for temperature monitoring1786 on the Astera Labs PT5161L PCIe retimer.1787 1788 This driver can also be built as a module. If so, the module1789 will be called pt5161l.1790 1791config SENSORS_PWM_FAN1792 tristate "PWM fan"1793 depends on PWM || COMPILE_TEST1794 depends on THERMAL || THERMAL=n1795 help1796 If you say yes here you get support for fans connected to PWM lines.1797 The driver uses the generic PWM interface, thus it will work on a1798 variety of SoCs.1799 1800 This driver can also be built as a module. If so, the module1801 will be called pwm-fan.1802 1803config SENSORS_RASPBERRYPI_HWMON1804 tristate "Raspberry Pi voltage monitor"1805 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)1806 help1807 If you say yes here you get support for voltage sensor on the1808 Raspberry Pi.1809 1810 This driver can also be built as a module. If so, the module1811 will be called raspberrypi-hwmon.1812 1813config SENSORS_SL28CPLD1814 tristate "Kontron sl28cpld hardware monitoring driver"1815 depends on MFD_SL28CPLD || COMPILE_TEST1816 help1817 If you say yes here you get support for the fan supervisor of the1818 sl28cpld board management controller.1819 1820 This driver can also be built as a module. If so, the module1821 will be called sl28cpld-hwmon.1822 1823config SENSORS_SBTSI1824 tristate "Emulated SB-TSI temperature sensor"1825 depends on I2C1826 help1827 If you say yes here you get support for emulated temperature1828 sensors on AMD SoCs with SB-TSI interface connected to a BMC device.1829 1830 This driver can also be built as a module. If so, the module will1831 be called sbtsi_temp.1832 1833config SENSORS_SBRMI1834 tristate "Emulated SB-RMI sensor"1835 depends on I2C1836 help1837 If you say yes here you get support for emulated RMI1838 sensors on AMD SoCs with APML interface connected to a BMC device.1839 1840 This driver can also be built as a module. If so, the module will1841 be called sbrmi.1842 1843config SENSORS_SHT151844 tristate "Sensiron humidity and temperature sensors. SHT15 and compat."1845 depends on GPIOLIB || COMPILE_TEST1846 select BITREVERSE1847 help1848 If you say yes here you get support for the Sensiron SHT10, SHT11,1849 SHT15, SHT71, SHT75 humidity and temperature sensors.1850 1851 This driver can also be built as a module. If so, the module1852 will be called sht15.1853 1854config SENSORS_SHT211855 tristate "Sensiron humidity and temperature sensors. SHT21 and compat."1856 depends on I2C1857 help1858 If you say yes here you get support for the Sensiron SHT21, SHT251859 humidity and temperature sensors.1860 1861 This driver can also be built as a module. If so, the module1862 will be called sht21.1863 1864config SENSORS_SHT3x1865 tristate "Sensiron humidity and temperature sensors. SHT3x and compat."1866 depends on I2C1867 select CRC81868 help1869 If you say yes here you get support for the Sensiron SHT30 and SHT311870 humidity and temperature sensors.1871 1872 This driver can also be built as a module. If so, the module1873 will be called sht3x.1874 1875config SENSORS_SHT4x1876 tristate "Sensiron humidity and temperature sensors. SHT4x and compat."1877 depends on I2C1878 select CRC81879 help1880 If you say yes here you get support for the Sensiron SHT40, SHT41 and1881 SHT45 humidity and temperature sensors.1882 1883 This driver can also be built as a module. If so, the module1884 will be called sht4x.1885 1886config SENSORS_SHTC11887 tristate "Sensiron humidity and temperature sensors. SHTC1 and compat."1888 depends on I2C1889 help1890 If you say yes here you get support for the Sensiron SHTC1, SHTW1,1891 and SHTC3 humidity and temperature sensors.1892 1893 This driver can also be built as a module. If so, the module1894 will be called shtc1.1895 1896config SENSORS_SIS55951897 tristate "Silicon Integrated Systems Corp. SiS5595"1898 depends on PCI && HAS_IOPORT1899 help1900 If you say yes here you get support for the integrated sensors in1901 SiS5595 South Bridges.1902 1903 This driver can also be built as a module. If so, the module1904 will be called sis5595.1905 1906config SENSORS_SY7636A1907 tristate "Silergy SY7636A"1908 depends on MFD_SY7636A1909 help1910 If you say yes here you get support for the thermistor readout of1911 the Silergy SY7636A PMIC.1912 1913 This driver can also be built as a module. If so, the module1914 will be called sy7636a-hwmon.1915 1916config SENSORS_DME17371917 tristate "SMSC DME1737, SCH311x and compatibles"1918 depends on HAS_IOPORT1919 depends on I2C && !PPC1920 select HWMON_VID1921 help1922 If you say yes here you get support for the hardware monitoring1923 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and1924 Asus A8000 Super-I/O chips.1925 1926 This driver can also be built as a module. If so, the module1927 will be called dme1737.1928 1929config SENSORS_EMC14031930 tristate "SMSC EMC1403/23 thermal sensor"1931 depends on I2C1932 select REGMAP_I2C1933 help1934 If you say yes here you get support for the SMSC EMC1403/231935 temperature monitoring chip.1936 1937 Threshold values can be configured using sysfs.1938 Data from the different diodes are accessible via sysfs.1939 1940config SENSORS_EMC21031941 tristate "SMSC EMC2103"1942 depends on I2C1943 help1944 If you say yes here you get support for the temperature1945 and fan sensors of the SMSC EMC2103 chips.1946 1947 This driver can also be built as a module. If so, the module1948 will be called emc2103.1949 1950config SENSORS_EMC23051951 tristate "Microchip EMC2305 and compatible EMC2301/2/3"1952 depends on I2C1953 imply THERMAL1954 help1955 If you say yes here you get support for the Microchip EMC23051956 fan controller chips.1957 The Microchip EMC2305 is a fan controller for up to 5 fans.1958 Fan rotation speeds are reported in RPM.1959 1960 This driver can also be built as a module. If so, the module1961 will be called emc2305.1962 1963config SENSORS_EMC6W2011964 tristate "SMSC EMC6W201"1965 depends on I2C1966 help1967 If you say yes here you get support for the SMSC EMC6W2011968 hardware monitoring chip.1969 1970 This driver can also be built as a module. If so, the module1971 will be called emc6w201.1972 1973config SENSORS_SMSC47M11974 tristate "SMSC LPC47M10x and compatibles"1975 depends on HAS_IOPORT1976 depends on !PPC1977 help1978 If you say yes here you get support for the integrated fan1979 monitoring and control capabilities of the SMSC LPC47B27x,1980 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,1981 LPC47M192, LPC47M292 and LPC47M997 chips.1982 1983 The temperature and voltage sensor features of the LPC47M15x,1984 LPC47M192, LPC47M292 and LPC47M997 are supported by another1985 driver, select also "SMSC LPC47M192 and compatibles" below for1986 those.1987 1988 This driver can also be built as a module. If so, the module1989 will be called smsc47m1.1990 1991config SENSORS_SMSC47M1921992 tristate "SMSC LPC47M192 and compatibles"1993 depends on I2C1994 select HWMON_VID1995 help1996 If you say yes here you get support for the temperature and1997 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M2921998 and LPC47M997 chips.1999 2000 The fan monitoring and control capabilities of these chips2001 are supported by another driver, select2002 "SMSC LPC47M10x and compatibles" above. You need both drivers2003 if you want fan control and voltage/temperature sensor support.2004 2005 This driver can also be built as a module. If so, the module2006 will be called smsc47m192.2007 2008config SENSORS_SMSC47B3972009 tristate "SMSC LPC47B397-NC"2010 depends on HAS_IOPORT2011 depends on !PPC2012 help2013 If you say yes here you get support for the SMSC LPC47B397-NC2014 sensor chip.2015 2016 This driver can also be built as a module. If so, the module2017 will be called smsc47b397.2018 2019config SENSORS_SCH56XX_COMMON2020 tristate2021 select REGMAP2022 2023config SENSORS_SCH56272024 tristate "SMSC SCH5627"2025 depends on HAS_IOPORT2026 depends on !PPC && WATCHDOG2027 select SENSORS_SCH56XX_COMMON2028 select WATCHDOG_CORE2029 help2030 If you say yes here you get support for the hardware monitoring2031 features of the SMSC SCH5627 Super-I/O chip including support for2032 the integrated watchdog.2033 2034 This driver can also be built as a module. If so, the module2035 will be called sch5627.2036 2037config SENSORS_SCH56362038 tristate "SMSC SCH5636"2039 depends on HAS_IOPORT2040 depends on !PPC && WATCHDOG2041 select SENSORS_SCH56XX_COMMON2042 select WATCHDOG_CORE2043 help2044 SMSC SCH5636 Super I/O chips include an embedded microcontroller for2045 hardware monitoring solutions, allowing motherboard manufacturers to2046 create their own custom hwmon solution based upon the SCH5636.2047 2048 Currently this driver only supports the Fujitsu Theseus SCH5636 based2049 hwmon solution. Say yes here if you want support for the Fujitsu2050 Theseus' hardware monitoring features including support for the2051 integrated watchdog.2052 2053 This driver can also be built as a module. If so, the module2054 will be called sch5636.2055 2056config SENSORS_STTS7512057 tristate "ST Microelectronics STTS751"2058 depends on I2C2059 help2060 If you say yes here you get support for STTS7512061 temperature sensor chips.2062 2063 This driver can also be built as a module. If so, the module2064 will be called stts751.2065 2066config SENSORS_SFCTEMP2067 tristate "Starfive JH71x0 temperature sensor"2068 depends on ARCH_STARFIVE || COMPILE_TEST2069 help2070 If you say yes here you get support for temperature sensor2071 on the Starfive JH71x0 SoCs.2072 2073 This driver can also be built as a module. If so, the module2074 will be called sfctemp.2075 2076config SENSORS_SG2042_MCU2077 tristate "Sophgo onboard MCU support"2078 depends on I2C2079 depends on ARCH_SOPHGO || COMPILE_TEST2080 help2081 Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides2082 power control and some basic information.2083 2084 This driver can be built as a module. If so, the module2085 will be called sg2042-mcu.2086 2087config SENSORS_SURFACE_FAN2088 tristate "Surface Fan Driver"2089 depends on SURFACE_AGGREGATOR2090 depends on SURFACE_AGGREGATOR_BUS2091 help2092 Driver that provides monitoring of the fan on Surface Pro devices that2093 have a fan, like the Surface Pro 9.2094 2095 This makes the fan's current speed accessible through the hwmon2096 system. It does not provide control over the fan, the firmware is2097 responsible for that, this driver merely provides monitoring.2098 2099 Select M or Y here, if you want to be able to read the fan's speed.2100 2101config SENSORS_SURFACE_TEMP2102 tristate "Microsoft Surface Thermal Sensor Driver"2103 depends on SURFACE_AGGREGATOR2104 depends on SURFACE_AGGREGATOR_BUS2105 help2106 Driver for monitoring thermal sensors connected via the Surface2107 Aggregator Module (embedded controller) on Microsoft Surface devices.2108 2109 This driver can also be built as a module. If so, the module2110 will be called surface_temp.2111 2112config SENSORS_ADC128D8182113 tristate "Texas Instruments ADC128D818"2114 depends on I2C2115 help2116 If you say yes here you get support for the Texas Instruments2117 ADC128D818 System Monitor with Temperature Sensor chip.2118 2119 This driver can also be built as a module. If so, the module2120 will be called adc128d818.2121 2122config SENSORS_ADS78282123 tristate "Texas Instruments ADS7828 and compatibles"2124 depends on I2C2125 select REGMAP_I2C2126 help2127 If you say yes here you get support for Texas Instruments ADS7828 and2128 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while2129 it is 8-bit on ADS7830.2130 2131 This driver can also be built as a module. If so, the module2132 will be called ads7828.2133 2134config SENSORS_ADS78712135 tristate "Texas Instruments ADS7871 A/D converter"2136 depends on SPI2137 help2138 If you say yes here you get support for TI ADS7871 & ADS78702139 2140 This driver can also be built as a module. If so, the module2141 will be called ads7871.2142 2143config SENSORS_AMC68212144 tristate "Texas Instruments AMC6821"2145 depends on I2C2146 select REGMAP_I2C2147 help2148 If you say yes here you get support for the Texas Instruments2149 AMC6821 hardware monitoring chips.2150 2151 This driver can also be built as a module. If so, the module2152 will be called amc6821.2153 2154config SENSORS_INA2092155 tristate "TI / Burr Brown INA209"2156 depends on I2C2157 help2158 If you say yes here you get support for the TI / Burr Brown INA2092159 voltage / current / power monitor I2C interface.2160 2161 This driver can also be built as a module. If so, the module will2162 be called ina209.2163 2164config SENSORS_INA2XX2165 tristate "Texas Instruments INA219 and compatibles"2166 depends on I2C2167 select REGMAP_I2C2168 help2169 If you say yes here you get support for INA219, INA220, INA226,2170 INA230, and INA231 power monitor chips.2171 2172 The INA2xx driver is configured for the default configuration of2173 the part as described in the datasheet.2174 Default value for Rshunt is 10 mOhms.2175 This driver can also be built as a module. If so, the module2176 will be called ina2xx.2177 2178config SENSORS_INA2382179 tristate "Texas Instruments INA238"2180 depends on I2C2181 select REGMAP_I2C2182 help2183 If you say yes here you get support for the INA238 power monitor2184 chip. This driver supports voltage, current, power and temperature2185 measurements as well as alarm configuration.2186 2187 This driver can also be built as a module. If so, the module2188 will be called ina238.2189 2190config SENSORS_INA32212191 tristate "Texas Instruments INA3221 Triple Power Monitor"2192 depends on I2C2193 select REGMAP_I2C2194 help2195 If you say yes here you get support for the TI INA3221 Triple Power2196 Monitor.2197 2198 This driver can also be built as a module. If so, the module2199 will be called ina3221.2200 2201config SENSORS_SPD51182202 tristate "SPD5118 Compliant Temperature Sensors"2203 depends on I2C2204 select REGMAP_I2C2205 help2206 If you say yes here you get support for SPD5118 (JEDEC JESD300)2207 compliant temperature sensors. Such sensors are found on DDR5 memory2208 modules.2209 2210 This driver can also be built as a module. If so, the module2211 will be called spd5118.2212 2213config SENSORS_SPD5118_DETECT2214 bool "Enable detect function"2215 depends on SENSORS_SPD51182216 default (!DMI || !X86)2217 help2218 If enabled, the driver auto-detects if a chip in the SPD address2219 range is compliant to the SPD51888 standard and auto-instantiates2220 if that is the case. If disabled, SPD5118 compliant devices have2221 to be instantiated by other means. On X86 systems with DMI support2222 this will typically be done from DMI DDR detection code in the2223 I2C SMBus subsystem. Devicetree based systems will instantiate2224 attached devices if the DIMMs are listed in the devicetree file.2225 2226 Disabling the detect function will speed up boot time and reduce2227 the risk of mis-detecting SPD5118 compliant devices. However, it2228 may result in missed DIMMs under some circumstances.2229 2230 If unsure, say Y.2231 2232config SENSORS_TC742233 tristate "Microchip TC74"2234 depends on I2C2235 help2236 If you say yes here you get support for Microchip TC74 single2237 input temperature sensor chips.2238 2239 This driver can also be built as a module. If so, the module2240 will be called tc74.2241 2242config SENSORS_THMC502243 tristate "Texas Instruments THMC50 / Analog Devices ADM1022"2244 depends on I2C2245 help2246 If you say yes here you get support for Texas Instruments THMC502247 sensor chips and clones: the Analog Devices ADM1022.2248 2249 This driver can also be built as a module. If so, the module2250 will be called thmc50.2251 2252config SENSORS_TMP1022253 tristate "Texas Instruments TMP102"2254 depends on I2C2255 select REGMAP_I2C2256 help2257 If you say yes here you get support for Texas Instruments TMP1022258 sensor chips.2259 2260 This driver can also be built as a module. If so, the module2261 will be called tmp102.2262 2263config SENSORS_TMP1032264 tristate "Texas Instruments TMP103"2265 depends on I2C2266 select REGMAP_I2C2267 help2268 If you say yes here you get support for Texas Instruments TMP1032269 sensor chips.2270 2271 This driver can also be built as a module. If so, the module2272 will be called tmp103.2273 2274config SENSORS_TMP1082275 tristate "Texas Instruments TMP108"2276 depends on I2C2277 select REGMAP_I2C2278 help2279 If you say yes here you get support for Texas Instruments TMP1082280 sensor chips.2281 2282 This driver can also be built as a module. If so, the module2283 will be called tmp108.2284 2285config SENSORS_TMP4012286 tristate "Texas Instruments TMP401 and compatibles"2287 depends on I2C2288 select REGMAP2289 help2290 If you say yes here you get support for Texas Instruments TMP401,2291 TMP411, TMP431, TMP432, and TMP435 temperature sensor chips.2292 2293 This driver can also be built as a module. If so, the module2294 will be called tmp401.2295 2296config SENSORS_TMP4212297 tristate "Texas Instruments TMP421 and compatible"2298 depends on I2C2299 help2300 If you say yes here you get support for Texas Instruments TMP421,2301 TMP422, TMP423, TMP441, and TMP442 temperature sensor chips.2302 2303 This driver can also be built as a module. If so, the module2304 will be called tmp421.2305 2306config SENSORS_TMP4642307 tristate "Texas Instruments TMP464 and compatible"2308 depends on I2C2309 select REGMAP_I2C2310 help2311 If you say yes here you get support for Texas Instruments TMP4642312 and TMP468 temperature sensor chips.2313 2314 This driver can also be built as a module. If so, the module2315 will be called tmp464.2316 2317config SENSORS_TMP5132318 tristate "Texas Instruments TMP513 and compatibles"2319 depends on I2C2320 select REGMAP_I2C2321 help2322 If you say yes here you get support for Texas Instruments TMP512,2323 and TMP513 temperature and power supply sensor chips.2324 2325 This driver can also be built as a module. If so, the module2326 will be called tmp513.2327 2328config SENSORS_VEXPRESS2329 tristate "Versatile Express"2330 depends on VEXPRESS_CONFIG2331 help2332 This driver provides support for hardware sensors available on2333 the ARM Ltd's Versatile Express platform. It can provide wide2334 range of information like temperature, power, energy.2335 2336config SENSORS_VIA_CPUTEMP2337 tristate "VIA CPU temperature sensor"2338 depends on X862339 select HWMON_VID2340 help2341 If you say yes here you get support for the temperature2342 sensor inside your CPU. Supported are all known variants of2343 the VIA C7 and Nano.2344 2345config SENSORS_VIA686A2346 tristate "VIA686A"2347 depends on PCI && HAS_IOPORT2348 help2349 If you say yes here you get support for the integrated sensors in2350 Via 686A/B South Bridges.2351 2352 This driver can also be built as a module. If so, the module2353 will be called via686a.2354 2355config SENSORS_VT12112356 tristate "VIA VT1211"2357 depends on HAS_IOPORT2358 depends on !PPC2359 select HWMON_VID2360 help2361 If you say yes here then you get support for hardware monitoring2362 features of the VIA VT1211 Super-I/O chip.2363 2364 This driver can also be built as a module. If so, the module2365 will be called vt1211.2366 2367config SENSORS_VT82312368 tristate "VIA VT8231"2369 depends on PCI && HAS_IOPORT2370 select HWMON_VID2371 help2372 If you say yes here then you get support for the integrated sensors2373 in the VIA VT8231 device.2374 2375 This driver can also be built as a module. If so, the module2376 will be called vt8231.2377 2378config SENSORS_W83773G2379 tristate "Nuvoton W83773G"2380 depends on I2C2381 select REGMAP_I2C2382 help2383 If you say yes here you get support for the Nuvoton W83773G hardware2384 monitoring chip.2385 2386 This driver can also be built as a module. If so, the module2387 will be called w83773g.2388 2389config SENSORS_W83781D2390 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"2391 depends on I2C2392 select HWMON_VID2393 help2394 If you say yes here you get support for the Winbond W8378x series2395 of sensor chips: the W83781D, W83782D and W83783S, and the similar2396 Asus AS99127F.2397 2398 This driver can also be built as a module. If so, the module2399 will be called w83781d.2400 2401config SENSORS_W83791D2402 tristate "Winbond W83791D"2403 depends on I2C2404 select HWMON_VID2405 help2406 If you say yes here you get support for the Winbond W83791D chip.2407 2408 This driver can also be built as a module. If so, the module2409 will be called w83791d.2410 2411config SENSORS_W83792D2412 tristate "Winbond W83792D"2413 depends on I2C2414 help2415 If you say yes here you get support for the Winbond W83792D chip.2416 2417 This driver can also be built as a module. If so, the module2418 will be called w83792d.2419 2420config SENSORS_W837932421 tristate "Winbond W83793"2422 depends on I2C2423 select HWMON_VID2424 help2425 If you say yes here you get support for the Winbond W837932426 hardware monitoring chip, including support for the integrated2427 watchdog.2428 2429 This driver can also be built as a module. If so, the module2430 will be called w83793.2431 2432config SENSORS_W837952433 tristate "Winbond/Nuvoton W83795G/ADG"2434 depends on I2C2435 help2436 If you say yes here you get support for the Winbond W83795G and2437 W83795ADG hardware monitoring chip, including manual fan speed2438 control.2439 2440 This driver can also be built as a module. If so, the module2441 will be called w83795.2442 2443config SENSORS_W83795_FANCTRL2444 bool "Include automatic fan control support"2445 depends on SENSORS_W837952446 help2447 If you say yes here, support for automatic fan speed control2448 will be included in the driver.2449 2450 Please also note that this option will create sysfs attribute2451 files which may change in the future, so you shouldn't rely2452 on them being stable.2453 2454config SENSORS_W83L785TS2455 tristate "Winbond W83L785TS-S"2456 depends on I2C2457 help2458 If you say yes here you get support for the Winbond W83L785TS-S2459 sensor chip, which is used on the Asus A7N8X, among other2460 motherboards.2461 2462 This driver can also be built as a module. If so, the module2463 will be called w83l785ts.2464 2465config SENSORS_W83L786NG2466 tristate "Winbond W83L786NG, W83L786NR"2467 depends on I2C2468 help2469 If you say yes here you get support for the Winbond W83L786NG2470 and W83L786NR sensor chips.2471 2472 This driver can also be built as a module. If so, the module2473 will be called w83l786ng.2474 2475config SENSORS_W83627HF2476 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"2477 depends on HAS_IOPORT2478 depends on !PPC2479 select HWMON_VID2480 help2481 If you say yes here you get support for the Winbond W836X7 series2482 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and2483 W83697HF.2484 2485 This driver can also be built as a module. If so, the module2486 will be called w83627hf.2487 2488config SENSORS_W83627EHF2489 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG"2490 depends on HAS_IOPORT2491 depends on !PPC2492 select HWMON_VID2493 help2494 If you say yes here you get support for the hardware2495 monitoring functionality of the Winbond W83627EHF Super-I/O chip.2496 2497 This driver also supports the W83627EHG, which is the lead-free2498 version of the W83627EHF, and the W83627DHG, which is a similar2499 chip suited for specific Intel processors that use PECI such as2500 the Core 2 Duo. And also the W83627UHG, which is a stripped down2501 version of the W83627DHG (as far as hardware monitoring goes.)2502 2503 This driver also supports Nuvoton W83667HG and W83667HG-B.2504 2505 This driver can also be built as a module. If so, the module2506 will be called w83627ehf.2507 2508config SENSORS_WM831X2509 tristate "WM831x PMICs"2510 depends on MFD_WM831X2511 help2512 If you say yes here you get support for the hardware2513 monitoring functionality of the Wolfson Microelectronics2514 WM831x series of PMICs.2515 2516 This driver can also be built as a module. If so, the module2517 will be called wm831x-hwmon.2518 2519config SENSORS_WM83502520 tristate "Wolfson Microelectronics WM835x"2521 depends on MFD_WM83502522 help2523 If you say yes here you get support for the hardware2524 monitoring features of the WM835x series of PMICs.2525 2526 This driver can also be built as a module. If so, the module2527 will be called wm8350-hwmon.2528 2529config SENSORS_ULTRA452530 tristate "Sun Ultra45 PIC16F747"2531 depends on SPARC642532 help2533 This driver provides support for the Ultra45 workstation environmental2534 sensors.2535 2536config SENSORS_XGENE2537 tristate "APM X-Gene SoC hardware monitoring driver"2538 depends on XGENE_SLIMPRO_MBOX || PCC2539 help2540 If you say yes here you get support for the temperature2541 and power sensors for APM X-Gene SoC.2542 2543config SENSORS_INTEL_M10_BMC_HWMON2544 tristate "Intel MAX10 BMC Hardware Monitoring"2545 depends on MFD_INTEL_M10_BMC_CORE2546 help2547 This driver provides support for the hardware monitoring functionality2548 on Intel MAX10 BMC chip.2549 2550 This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its2551 sensors monitor various telemetry data of different components on the2552 card, e.g. board temperature, FPGA core temperature/voltage/current.2553 2554if ACPI2555 2556comment "ACPI drivers"2557 2558config SENSORS_ACPI_POWER2559 tristate "ACPI 4.0 power meter"2560 help2561 This driver exposes ACPI 4.0 power meters as hardware monitoring2562 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware2563 and a power meter.2564 2565 To compile this driver as a module, choose M here:2566 the module will be called acpi_power_meter.2567 2568config SENSORS_ATK01102569 tristate "ASUS ATK0110"2570 depends on X862571 help2572 If you say yes here you get support for the ACPI hardware2573 monitoring interface found in many ASUS motherboards. This2574 driver will provide readings of fans, voltages and temperatures2575 through the system firmware.2576 2577 This driver can also be built as a module. If so, the module2578 will be called asus_atk0110.2579 2580config SENSORS_ASUS_WMI2581 tristate "ASUS WMI X370/X470/B450/X399"2582 depends on ACPI_WMI2583 help2584 If you say yes here you get support for the ACPI hardware monitoring2585 interface found in X370/X470/B450/X399 ASUS motherboards. This driver2586 will provide readings of fans, voltages and temperatures through the system2587 firmware.2588 2589 This driver can also be built as a module. If so, the module2590 will be called asus_wmi_sensors.2591 2592config SENSORS_ASUS_EC2593 tristate "ASUS EC Sensors"2594 depends on X862595 help2596 If you say yes here you get support for the ACPI embedded controller2597 hardware monitoring interface found in ASUS motherboards. The driver2598 currently supports B550/X570 boards, although other ASUS boards might2599 provide this monitoring interface as well.2600 2601 This driver can also be built as a module. If so, the module2602 will be called asus_ec_sensors.2603 2604config SENSORS_HP_WMI2605 tristate "HP WMI Sensors"2606 depends on ACPI_WMI2607 help2608 If you say yes here you get support for the ACPI hardware monitoring2609 interface found in HP (and some HP Compaq) business-class computers.2610 Available sensors vary between systems. Temperature and fan speed2611 sensors are the most common.2612 2613 This driver can also be built as a module. If so, the module2614 will be called hp_wmi_sensors.2615 2616endif # ACPI2617 2618endif # HWMON2619