brintos

brintos / linux-shallow public Read only

0
0
Text · 2.5 KiB · b4b81e1 Raw
90 lines · c
1/* SPDX-License-Identifier: GPL-2.0-or-later */2/*3 * bsbe1.h - ALPS BSBE1 tuner support4 *5 * the project's page is at https://linuxtv.org6 */7 8#ifndef BSBE1_H9#define BSBE1_H10 11static u8 alps_bsbe1_inittab[] = {12	0x01, 0x15,   /* XTAL = 4MHz, VCO = 352 MHz */13	0x02, 0x30,   /* MCLK = 88 MHz */14	0x03, 0x00,   /* ACR output 0 */15	0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */16	0x05, 0x05,   /* I2CT = 0, SCLT = 1, SDAT = 1 */17	0x06, 0x00,   /* DAC output 0 */18	0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */19	0x09, 0x00,   /* FIFO */20	0x0c, 0x51,   /* OP1/OP0 normal, val = 1 (LNB power on) */21	0x0d, 0x82,   /* DC offset compensation = on, beta_agc1 = 2 */22	0x0f, 0x92,   /* AGC1R */23	0x10, 0x34,   /* AGC2O */24	0x11, 0x84,   /* TLSR */25	0x12, 0xb9,   /* CFD */26	0x15, 0xc9,   /* lock detector threshold */27	0x28, 0x00,   /* out imp: normal, type: parallel, FEC mode: QPSK */28	0x33, 0xfc,   /* RS control */29	0x34, 0x93,   /* count viterbi bit errors per 2E18 bytes */30	0xff, 0xff31};32 33 34static int alps_bsbe1_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)35{36	u8 aclk = 0;37	u8 bclk = 0;38 39	if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }40	else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }41	else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }42	else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }43	else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }44	else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }45 46	stv0299_writereg(fe, 0x13, aclk);47	stv0299_writereg(fe, 0x14, bclk);48	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);49	stv0299_writereg(fe, 0x20, (ratio >>  8) & 0xff);50	stv0299_writereg(fe, 0x21, (ratio      ) & 0xf0);51 52	return 0;53}54 55static int alps_bsbe1_tuner_set_params(struct dvb_frontend *fe)56{57	struct dtv_frontend_properties *p = &fe->dtv_property_cache;58	int ret;59	u8 data[4];60	u32 div;61	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };62	struct i2c_adapter *i2c = fe->tuner_priv;63 64	if ((p->frequency < 950000) || (p->frequency > 2150000))65		return -EINVAL;66 67	div = p->frequency / 1000;68	data[0] = (div >> 8) & 0x7f;69	data[1] = div & 0xff;70	data[2] = 0x80 | ((div & 0x18000) >> 10) | 0x1;71	data[3] = 0xe0;72 73	if (fe->ops.i2c_gate_ctrl)74		fe->ops.i2c_gate_ctrl(fe, 1);75	ret = i2c_transfer(i2c, &msg, 1);76	return (ret != 1) ? -EIO : 0;77}78 79static struct stv0299_config alps_bsbe1_config = {80	.demod_address = 0x68,81	.inittab = alps_bsbe1_inittab,82	.mclk = 88000000UL,83	.invert = 1,84	.skip_reinit = 0,85	.min_delay_ms = 100,86	.set_symbol_rate = alps_bsbe1_set_symbol_rate,87};88 89#endif90