brintos

brintos / linux-shallow public Read only

0
0
Text · 9.7 KiB · 0330b78 Raw
403 lines · c
1// SPDX-License-Identifier: GPL-2.0-or-later2/*3 * horus3a.h4 *5 * Sony Horus3A DVB-S/S2 tuner driver6 *7 * Copyright 2012 Sony Corporation8 * Copyright (C) 2014 NetUP Inc.9 * Copyright (C) 2014 Sergey Kozlov <serjk@netup.ru>10 * Copyright (C) 2014 Abylay Ospan <aospan@netup.ru>11 */12 13#include <linux/slab.h>14#include <linux/module.h>15#include <linux/dvb/frontend.h>16#include <linux/types.h>17#include "horus3a.h"18#include <media/dvb_frontend.h>19 20#define MAX_WRITE_REGSIZE      521 22enum horus3a_state {23	STATE_UNKNOWN,24	STATE_SLEEP,25	STATE_ACTIVE26};27 28struct horus3a_priv {29	u32			frequency;30	u8			i2c_address;31	struct i2c_adapter	*i2c;32	enum horus3a_state	state;33	void			*set_tuner_data;34	int			(*set_tuner)(void *, int);35};36 37static void horus3a_i2c_debug(struct horus3a_priv *priv,38			      u8 reg, u8 write, const u8 *data, u32 len)39{40	dev_dbg(&priv->i2c->dev, "horus3a: I2C %s reg 0x%02x size %d\n",41		(write == 0 ? "read" : "write"), reg, len);42	print_hex_dump_bytes("horus3a: I2C data: ",43		DUMP_PREFIX_OFFSET, data, len);44}45 46static int horus3a_write_regs(struct horus3a_priv *priv,47			      u8 reg, const u8 *data, u32 len)48{49	int ret;50	u8 buf[MAX_WRITE_REGSIZE + 1];51	struct i2c_msg msg[1] = {52		{53			.addr = priv->i2c_address,54			.flags = 0,55			.len = len + 1,56			.buf = buf,57		}58	};59 60	if (len + 1 > sizeof(buf)) {61		dev_warn(&priv->i2c->dev,"wr reg=%04x: len=%d is too big!\n",62			 reg, len + 1);63		return -E2BIG;64	}65 66	horus3a_i2c_debug(priv, reg, 1, data, len);67	buf[0] = reg;68	memcpy(&buf[1], data, len);69	ret = i2c_transfer(priv->i2c, msg, 1);70	if (ret >= 0 && ret != 1)71		ret = -EREMOTEIO;72	if (ret < 0) {73		dev_warn(&priv->i2c->dev,74			"%s: i2c wr failed=%d reg=%02x len=%d\n",75			KBUILD_MODNAME, ret, reg, len);76		return ret;77	}78	return 0;79}80 81static int horus3a_write_reg(struct horus3a_priv *priv, u8 reg, u8 val)82{83	u8 tmp = val; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */84 85	return horus3a_write_regs(priv, reg, &tmp, 1);86}87 88static int horus3a_enter_power_save(struct horus3a_priv *priv)89{90	u8 data[2];91 92	dev_dbg(&priv->i2c->dev, "%s()\n", __func__);93	if (priv->state == STATE_SLEEP)94		return 0;95	/* IQ Generator disable */96	horus3a_write_reg(priv, 0x2a, 0x79);97	/* MDIV_EN = 0 */98	horus3a_write_reg(priv, 0x29, 0x70);99	/* VCO disable preparation */100	horus3a_write_reg(priv, 0x28, 0x3e);101	/* VCO buffer disable */102	horus3a_write_reg(priv, 0x2a, 0x19);103	/* VCO calibration disable */104	horus3a_write_reg(priv, 0x1c, 0x00);105	/* Power save setting (xtal is not stopped) */106	data[0] = 0xC0;107	/* LNA is Disabled */108	data[1] = 0xA7;109	/* 0x11 - 0x12 */110	horus3a_write_regs(priv, 0x11, data, sizeof(data));111	priv->state = STATE_SLEEP;112	return 0;113}114 115static int horus3a_leave_power_save(struct horus3a_priv *priv)116{117	u8 data[2];118 119	dev_dbg(&priv->i2c->dev, "%s()\n", __func__);120	if (priv->state == STATE_ACTIVE)121		return 0;122	/* Leave power save */123	data[0] = 0x00;124	/* LNA is Disabled */125	data[1] = 0xa7;126	/* 0x11 - 0x12 */127	horus3a_write_regs(priv, 0x11, data, sizeof(data));128	/* VCO buffer enable */129	horus3a_write_reg(priv, 0x2a, 0x79);130	/* VCO calibration enable */131	horus3a_write_reg(priv, 0x1c, 0xc0);132	/* MDIV_EN = 1 */133	horus3a_write_reg(priv, 0x29, 0x71);134	usleep_range(5000, 7000);135	priv->state = STATE_ACTIVE;136	return 0;137}138 139static int horus3a_init(struct dvb_frontend *fe)140{141	struct horus3a_priv *priv = fe->tuner_priv;142 143	dev_dbg(&priv->i2c->dev, "%s()\n", __func__);144	return 0;145}146 147static void horus3a_release(struct dvb_frontend *fe)148{149	struct horus3a_priv *priv = fe->tuner_priv;150 151	dev_dbg(&priv->i2c->dev, "%s()\n", __func__);152	kfree(fe->tuner_priv);153	fe->tuner_priv = NULL;154}155 156static int horus3a_sleep(struct dvb_frontend *fe)157{158	struct horus3a_priv *priv = fe->tuner_priv;159 160	dev_dbg(&priv->i2c->dev, "%s()\n", __func__);161	horus3a_enter_power_save(priv);162	return 0;163}164 165static int horus3a_set_params(struct dvb_frontend *fe)166{167	struct dtv_frontend_properties *p = &fe->dtv_property_cache;168	struct horus3a_priv *priv = fe->tuner_priv;169	u32 frequency = p->frequency;170	u32 symbol_rate = p->symbol_rate/1000;171	u8 mixdiv = 0;172	u8 mdiv = 0;173	u32 ms = 0;174	u8 f_ctl = 0;175	u8 g_ctl = 0;176	u8 fc_lpf = 0;177	u8 data[5];178 179	dev_dbg(&priv->i2c->dev, "%s(): frequency %dkHz symbol_rate %dksps\n",180		__func__, frequency, symbol_rate);181	if (priv->set_tuner)182		priv->set_tuner(priv->set_tuner_data, 0);183	if (priv->state == STATE_SLEEP)184		horus3a_leave_power_save(priv);185 186	/* frequency should be X MHz (X : integer) */187	frequency = DIV_ROUND_CLOSEST(frequency, 1000) * 1000;188	if (frequency <= 1155000) {189		mixdiv = 4;190		mdiv = 1;191	} else {192		mixdiv = 2;193		mdiv = 0;194	}195	/* Assumed that fREF == 1MHz (1000kHz) */196	ms = DIV_ROUND_CLOSEST((frequency * mixdiv) / 2, 1000);197	if (ms > 0x7FFF) { /* 15 bit */198		dev_err(&priv->i2c->dev, "horus3a: invalid frequency %d\n",199			frequency);200		return -EINVAL;201	}202	if (frequency < 975000) {203		/* F_CTL=11100 G_CTL=001 */204		f_ctl = 0x1C;205		g_ctl = 0x01;206	} else if (frequency < 1050000) {207		/* F_CTL=11000 G_CTL=010 */208		f_ctl = 0x18;209		g_ctl = 0x02;210	} else if (frequency < 1150000) {211		/* F_CTL=10100 G_CTL=010 */212		f_ctl = 0x14;213		g_ctl = 0x02;214	} else if (frequency < 1250000) {215		/* F_CTL=10000 G_CTL=011 */216		f_ctl = 0x10;217		g_ctl = 0x03;218	} else if (frequency < 1350000) {219		/* F_CTL=01100 G_CTL=100 */220		f_ctl = 0x0C;221		g_ctl = 0x04;222	} else if (frequency < 1450000) {223		/* F_CTL=01010 G_CTL=100 */224		f_ctl = 0x0A;225		g_ctl = 0x04;226	} else if (frequency < 1600000) {227		/* F_CTL=00111 G_CTL=101 */228		f_ctl = 0x07;229		g_ctl = 0x05;230	} else if (frequency < 1800000) {231		/* F_CTL=00100 G_CTL=010 */232		f_ctl = 0x04;233		g_ctl = 0x02;234	} else if (frequency < 2000000) {235		/* F_CTL=00010 G_CTL=001 */236		f_ctl = 0x02;237		g_ctl = 0x01;238	} else {239		/* F_CTL=00000 G_CTL=000 */240		f_ctl = 0x00;241		g_ctl = 0x00;242	}243	/* LPF cutoff frequency setting */244	if (p->delivery_system == SYS_DVBS) {245		/*246		 * rolloff = 0.35247		 * SR <= 4.3248		 * fc_lpf = 5249		 * 4.3 < SR <= 10250		 * fc_lpf = SR * (1 + rolloff) / 2 + SR / 2 =251		 *	SR * 1.175 = SR * (47/40)252		 * 10 < SR253		 * fc_lpf = SR * (1 + rolloff) / 2 + 5 =254		 *	SR * 0.675 + 5 = SR * (27/40) + 5255		 * NOTE: The result should be round up.256		 */257		if (symbol_rate <= 4300)258			fc_lpf = 5;259		else if (symbol_rate <= 10000)260			fc_lpf = (u8)DIV_ROUND_UP(symbol_rate * 47, 40000);261		else262			fc_lpf = (u8)DIV_ROUND_UP(symbol_rate * 27, 40000) + 5;263		/* 5 <= fc_lpf <= 36 */264		if (fc_lpf > 36)265			fc_lpf = 36;266	} else if (p->delivery_system == SYS_DVBS2) {267		/*268		 * SR <= 4.5:269		 * fc_lpf = 5270		 * 4.5 < SR <= 10:271		 * fc_lpf = SR * (1 + rolloff) / 2 + SR / 2272		 * 10 < SR:273		 * fc_lpf = SR * (1 + rolloff) / 2 + 5274		 * NOTE: The result should be round up.275		 */276		if (symbol_rate <= 4500)277			fc_lpf = 5;278		else if (symbol_rate <= 10000)279			fc_lpf = (u8)((symbol_rate * 11 + (10000-1)) / 10000);280		else281			fc_lpf = (u8)((symbol_rate * 3 + (5000-1)) / 5000 + 5);282		/* 5 <= fc_lpf <= 36 is valid */283		if (fc_lpf > 36)284			fc_lpf = 36;285	} else {286		dev_err(&priv->i2c->dev,287			"horus3a: invalid delivery system %d\n",288			p->delivery_system);289		return -EINVAL;290	}291	/* 0x00 - 0x04 */292	data[0] = (u8)((ms >> 7) & 0xFF);293	data[1] = (u8)((ms << 1) & 0xFF);294	data[2] = 0x00;295	data[3] = 0x00;296	data[4] = (u8)(mdiv << 7);297	horus3a_write_regs(priv, 0x00, data, sizeof(data));298	/* Write G_CTL, F_CTL */299	horus3a_write_reg(priv, 0x09, (u8)((g_ctl << 5) | f_ctl));300	/* Write LPF cutoff frequency */301	horus3a_write_reg(priv, 0x37, (u8)(0x80 | (fc_lpf << 1)));302	/* Start Calibration */303	horus3a_write_reg(priv, 0x05, 0x80);304	/* IQ Generator enable */305	horus3a_write_reg(priv, 0x2a, 0x7b);306	/* tuner stabilization time */307	msleep(60);308	/* Store tuned frequency to the struct */309	priv->frequency = ms * 2 * 1000 / mixdiv;310	return 0;311}312 313static int horus3a_get_frequency(struct dvb_frontend *fe, u32 *frequency)314{315	struct horus3a_priv *priv = fe->tuner_priv;316 317	*frequency = priv->frequency;318	return 0;319}320 321static const struct dvb_tuner_ops horus3a_tuner_ops = {322	.info = {323		.name = "Sony Horus3a",324		.frequency_min_hz  =  950 * MHz,325		.frequency_max_hz  = 2150 * MHz,326		.frequency_step_hz =    1 * MHz,327	},328	.init = horus3a_init,329	.release = horus3a_release,330	.sleep = horus3a_sleep,331	.set_params = horus3a_set_params,332	.get_frequency = horus3a_get_frequency,333};334 335struct dvb_frontend *horus3a_attach(struct dvb_frontend *fe,336				    const struct horus3a_config *config,337				    struct i2c_adapter *i2c)338{339	u8 buf[3], val;340	struct horus3a_priv *priv = NULL;341 342	priv = kzalloc(sizeof(struct horus3a_priv), GFP_KERNEL);343	if (priv == NULL)344		return NULL;345	priv->i2c_address = (config->i2c_address >> 1);346	priv->i2c = i2c;347	priv->set_tuner_data = config->set_tuner_priv;348	priv->set_tuner = config->set_tuner_callback;349 350	if (fe->ops.i2c_gate_ctrl)351		fe->ops.i2c_gate_ctrl(fe, 1);352 353	/* wait 4ms after power on */354	usleep_range(4000, 6000);355	/* IQ Generator disable */356	horus3a_write_reg(priv, 0x2a, 0x79);357	/* REF_R = Xtal Frequency */358	buf[0] = config->xtal_freq_mhz;359	buf[1] = config->xtal_freq_mhz;360	buf[2] = 0;361	/* 0x6 - 0x8 */362	horus3a_write_regs(priv, 0x6, buf, 3);363	/* IQ Out = Single Ended */364	horus3a_write_reg(priv, 0x0a, 0x40);365	switch (config->xtal_freq_mhz) {366	case 27:367		val = 0x1f;368		break;369	case 24:370		val = 0x10;371		break;372	case 16:373		val = 0xc;374		break;375	default:376		val = 0;377		dev_warn(&priv->i2c->dev,378			"horus3a: invalid xtal frequency %dMHz\n",379			config->xtal_freq_mhz);380		break;381	}382	val <<= 2;383	horus3a_write_reg(priv, 0x0e, val);384	horus3a_enter_power_save(priv);385	usleep_range(3000, 5000);386 387	if (fe->ops.i2c_gate_ctrl)388		fe->ops.i2c_gate_ctrl(fe, 0);389 390	memcpy(&fe->ops.tuner_ops, &horus3a_tuner_ops,391				sizeof(struct dvb_tuner_ops));392	fe->tuner_priv = priv;393	dev_info(&priv->i2c->dev,394		"Sony HORUS3A attached on addr=%x at I2C adapter %p\n",395		priv->i2c_address, priv->i2c);396	return fe;397}398EXPORT_SYMBOL_GPL(horus3a_attach);399 400MODULE_DESCRIPTION("Sony HORUS3A satellite tuner driver");401MODULE_AUTHOR("Sergey Kozlov <serjk@netup.ru>");402MODULE_LICENSE("GPL");403