1383 lines · c
1// SPDX-License-Identifier: GPL-2.0-or-later2 /*3 Driver for Philips tda1004xh OFDM Demodulator4 5 (c) 2003, 2004 Andrew de Quincey & Robert Schlabbach6 7 8 */9/*10 * This driver needs external firmware. Please use the commands11 * "<kerneldir>/scripts/get_dvb_firmware tda10045",12 * "<kerneldir>/scripts/get_dvb_firmware tda10046" to13 * download/extract them, and then copy them to /usr/lib/hotplug/firmware14 * or /lib/firmware (depending on configuration of firmware hotplug).15 */16#define TDA10045_DEFAULT_FIRMWARE "dvb-fe-tda10045.fw"17#define TDA10046_DEFAULT_FIRMWARE "dvb-fe-tda10046.fw"18 19#include <linux/init.h>20#include <linux/module.h>21#include <linux/device.h>22#include <linux/jiffies.h>23#include <linux/string.h>24#include <linux/slab.h>25 26#include <media/dvb_frontend.h>27#include "tda1004x.h"28 29static int debug;30#define dprintk(args...) \31 do { \32 if (debug) printk(KERN_DEBUG "tda1004x: " args); \33 } while (0)34 35#define TDA1004X_CHIPID 0x0036#define TDA1004X_AUTO 0x0137#define TDA1004X_IN_CONF1 0x0238#define TDA1004X_IN_CONF2 0x0339#define TDA1004X_OUT_CONF1 0x0440#define TDA1004X_OUT_CONF2 0x0541#define TDA1004X_STATUS_CD 0x0642#define TDA1004X_CONFC4 0x0743#define TDA1004X_DSSPARE2 0x0C44#define TDA10045H_CODE_IN 0x0D45#define TDA10045H_FWPAGE 0x0E46#define TDA1004X_SCAN_CPT 0x1047#define TDA1004X_DSP_CMD 0x1148#define TDA1004X_DSP_ARG 0x1249#define TDA1004X_DSP_DATA1 0x1350#define TDA1004X_DSP_DATA2 0x1451#define TDA1004X_CONFADC1 0x1552#define TDA1004X_CONFC1 0x1653#define TDA10045H_S_AGC 0x1a54#define TDA10046H_AGC_TUN_LEVEL 0x1a55#define TDA1004X_SNR 0x1c56#define TDA1004X_CONF_TS1 0x1e57#define TDA1004X_CONF_TS2 0x1f58#define TDA1004X_CBER_RESET 0x2059#define TDA1004X_CBER_MSB 0x2160#define TDA1004X_CBER_LSB 0x2261#define TDA1004X_CVBER_LUT 0x2362#define TDA1004X_VBER_MSB 0x2463#define TDA1004X_VBER_MID 0x2564#define TDA1004X_VBER_LSB 0x2665#define TDA1004X_UNCOR 0x2766 67#define TDA10045H_CONFPLL_P 0x2D68#define TDA10045H_CONFPLL_M_MSB 0x2E69#define TDA10045H_CONFPLL_M_LSB 0x2F70#define TDA10045H_CONFPLL_N 0x3071 72#define TDA10046H_CONFPLL1 0x2D73#define TDA10046H_CONFPLL2 0x2F74#define TDA10046H_CONFPLL3 0x3075#define TDA10046H_TIME_WREF1 0x3176#define TDA10046H_TIME_WREF2 0x3277#define TDA10046H_TIME_WREF3 0x3378#define TDA10046H_TIME_WREF4 0x3479#define TDA10046H_TIME_WREF5 0x3580 81#define TDA10045H_UNSURW_MSB 0x3182#define TDA10045H_UNSURW_LSB 0x3283#define TDA10045H_WREF_MSB 0x3384#define TDA10045H_WREF_MID 0x3485#define TDA10045H_WREF_LSB 0x3586#define TDA10045H_MUXOUT 0x3687#define TDA1004X_CONFADC2 0x3788 89#define TDA10045H_IOFFSET 0x3890 91#define TDA10046H_CONF_TRISTATE1 0x3B92#define TDA10046H_CONF_TRISTATE2 0x3C93#define TDA10046H_CONF_POLARITY 0x3D94#define TDA10046H_FREQ_OFFSET 0x3E95#define TDA10046H_GPIO_OUT_SEL 0x4196#define TDA10046H_GPIO_SELECT 0x4297#define TDA10046H_AGC_CONF 0x4398#define TDA10046H_AGC_THR 0x4499#define TDA10046H_AGC_RENORM 0x45100#define TDA10046H_AGC_GAINS 0x46101#define TDA10046H_AGC_TUN_MIN 0x47102#define TDA10046H_AGC_TUN_MAX 0x48103#define TDA10046H_AGC_IF_MIN 0x49104#define TDA10046H_AGC_IF_MAX 0x4A105 106#define TDA10046H_FREQ_PHY2_MSB 0x4D107#define TDA10046H_FREQ_PHY2_LSB 0x4E108 109#define TDA10046H_CVBER_CTRL 0x4F110#define TDA10046H_AGC_IF_LEVEL 0x52111#define TDA10046H_CODE_CPT 0x57112#define TDA10046H_CODE_IN 0x58113 114 115static int tda1004x_write_byteI(struct tda1004x_state *state, int reg, int data)116{117 int ret;118 u8 buf[] = { reg, data };119 struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 };120 121 dprintk("%s: reg=0x%x, data=0x%x\n", __func__, reg, data);122 123 msg.addr = state->config->demod_address;124 ret = i2c_transfer(state->i2c, &msg, 1);125 126 if (ret != 1)127 dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",128 __func__, reg, data, ret);129 130 dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __func__,131 reg, data, ret);132 return (ret != 1) ? -1 : 0;133}134 135static int tda1004x_read_byte(struct tda1004x_state *state, int reg)136{137 int ret;138 u8 b0[] = { reg };139 u8 b1[] = { 0 };140 struct i2c_msg msg[] = {{ .flags = 0, .buf = b0, .len = 1 },141 { .flags = I2C_M_RD, .buf = b1, .len = 1 }};142 143 dprintk("%s: reg=0x%x\n", __func__, reg);144 145 msg[0].addr = state->config->demod_address;146 msg[1].addr = state->config->demod_address;147 ret = i2c_transfer(state->i2c, msg, 2);148 149 if (ret != 2) {150 dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg,151 ret);152 return -EINVAL;153 }154 155 dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __func__,156 reg, b1[0], ret);157 return b1[0];158}159 160static int tda1004x_write_mask(struct tda1004x_state *state, int reg, int mask, int data)161{162 int val;163 dprintk("%s: reg=0x%x, mask=0x%x, data=0x%x\n", __func__, reg,164 mask, data);165 166 // read a byte and check167 val = tda1004x_read_byte(state, reg);168 if (val < 0)169 return val;170 171 // mask if off172 val = val & ~mask;173 val |= data & 0xff;174 175 // write it out again176 return tda1004x_write_byteI(state, reg, val);177}178 179static int tda1004x_write_buf(struct tda1004x_state *state, int reg, unsigned char *buf, int len)180{181 int i;182 int result;183 184 dprintk("%s: reg=0x%x, len=0x%x\n", __func__, reg, len);185 186 result = 0;187 for (i = 0; i < len; i++) {188 result = tda1004x_write_byteI(state, reg + i, buf[i]);189 if (result != 0)190 break;191 }192 193 return result;194}195 196static int tda1004x_enable_tuner_i2c(struct tda1004x_state *state)197{198 int result;199 dprintk("%s\n", __func__);200 201 result = tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 2);202 msleep(20);203 return result;204}205 206static int tda1004x_disable_tuner_i2c(struct tda1004x_state *state)207{208 dprintk("%s\n", __func__);209 210 return tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 0);211}212 213static int tda10045h_set_bandwidth(struct tda1004x_state *state,214 u32 bandwidth)215{216 static u8 bandwidth_6mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x60, 0x1e, 0xa7, 0x45, 0x4f };217 static u8 bandwidth_7mhz[] = { 0x02, 0x00, 0x37, 0x00, 0x4a, 0x2f, 0x6d, 0x76, 0xdb };218 static u8 bandwidth_8mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x48, 0x17, 0x89, 0xc7, 0x14 };219 220 switch (bandwidth) {221 case 6000000:222 tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_6mhz, sizeof(bandwidth_6mhz));223 break;224 225 case 7000000:226 tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_7mhz, sizeof(bandwidth_7mhz));227 break;228 229 case 8000000:230 tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_8mhz, sizeof(bandwidth_8mhz));231 break;232 233 default:234 return -EINVAL;235 }236 237 tda1004x_write_byteI(state, TDA10045H_IOFFSET, 0);238 239 return 0;240}241 242static int tda10046h_set_bandwidth(struct tda1004x_state *state,243 u32 bandwidth)244{245 static u8 bandwidth_6mhz_53M[] = { 0x7b, 0x2e, 0x11, 0xf0, 0xd2 };246 static u8 bandwidth_7mhz_53M[] = { 0x6a, 0x02, 0x6a, 0x43, 0x9f };247 static u8 bandwidth_8mhz_53M[] = { 0x5c, 0x32, 0xc2, 0x96, 0x6d };248 249 static u8 bandwidth_6mhz_48M[] = { 0x70, 0x02, 0x49, 0x24, 0x92 };250 static u8 bandwidth_7mhz_48M[] = { 0x60, 0x02, 0xaa, 0xaa, 0xab };251 static u8 bandwidth_8mhz_48M[] = { 0x54, 0x03, 0x0c, 0x30, 0xc3 };252 int tda10046_clk53m;253 254 if ((state->config->if_freq == TDA10046_FREQ_045) ||255 (state->config->if_freq == TDA10046_FREQ_052))256 tda10046_clk53m = 0;257 else258 tda10046_clk53m = 1;259 switch (bandwidth) {260 case 6000000:261 if (tda10046_clk53m)262 tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_53M,263 sizeof(bandwidth_6mhz_53M));264 else265 tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_48M,266 sizeof(bandwidth_6mhz_48M));267 if (state->config->if_freq == TDA10046_FREQ_045) {268 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0a);269 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xab);270 }271 break;272 273 case 7000000:274 if (tda10046_clk53m)275 tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_53M,276 sizeof(bandwidth_7mhz_53M));277 else278 tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_48M,279 sizeof(bandwidth_7mhz_48M));280 if (state->config->if_freq == TDA10046_FREQ_045) {281 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);282 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);283 }284 break;285 286 case 8000000:287 if (tda10046_clk53m)288 tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_53M,289 sizeof(bandwidth_8mhz_53M));290 else291 tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_48M,292 sizeof(bandwidth_8mhz_48M));293 if (state->config->if_freq == TDA10046_FREQ_045) {294 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);295 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x55);296 }297 break;298 299 default:300 return -EINVAL;301 }302 303 return 0;304}305 306static int tda1004x_do_upload(struct tda1004x_state *state,307 const unsigned char *mem, unsigned int len,308 u8 dspCodeCounterReg, u8 dspCodeInReg)309{310 u8 buf[65];311 struct i2c_msg fw_msg = { .flags = 0, .buf = buf, .len = 0 };312 int tx_size;313 int pos = 0;314 315 /* clear code counter */316 tda1004x_write_byteI(state, dspCodeCounterReg, 0);317 fw_msg.addr = state->config->demod_address;318 319 i2c_lock_bus(state->i2c, I2C_LOCK_SEGMENT);320 buf[0] = dspCodeInReg;321 while (pos != len) {322 // work out how much to send this time323 tx_size = len - pos;324 if (tx_size > 0x10)325 tx_size = 0x10;326 327 // send the chunk328 memcpy(buf + 1, mem + pos, tx_size);329 fw_msg.len = tx_size + 1;330 if (__i2c_transfer(state->i2c, &fw_msg, 1) != 1) {331 printk(KERN_ERR "tda1004x: Error during firmware upload\n");332 i2c_unlock_bus(state->i2c, I2C_LOCK_SEGMENT);333 return -EIO;334 }335 pos += tx_size;336 337 dprintk("%s: fw_pos=0x%x\n", __func__, pos);338 }339 i2c_unlock_bus(state->i2c, I2C_LOCK_SEGMENT);340 341 /* give the DSP a chance to settle 03/10/05 Hac */342 msleep(100);343 344 return 0;345}346 347static int tda1004x_check_upload_ok(struct tda1004x_state *state)348{349 u8 data1, data2;350 unsigned long timeout;351 352 if (state->demod_type == TDA1004X_DEMOD_TDA10046) {353 timeout = jiffies + 2 * HZ;354 while(!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) {355 if (time_after(jiffies, timeout)) {356 printk(KERN_ERR "tda1004x: timeout waiting for DSP ready\n");357 break;358 }359 msleep(1);360 }361 } else362 msleep(100);363 364 // check upload was OK365 tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0); // we want to read from the DSP366 tda1004x_write_byteI(state, TDA1004X_DSP_CMD, 0x67);367 368 data1 = tda1004x_read_byte(state, TDA1004X_DSP_DATA1);369 data2 = tda1004x_read_byte(state, TDA1004X_DSP_DATA2);370 if (data1 != 0x67 || data2 < 0x20 || data2 > 0x2e) {371 printk(KERN_INFO "tda1004x: found firmware revision %x -- invalid\n", data2);372 return -EIO;373 }374 printk(KERN_INFO "tda1004x: found firmware revision %x -- ok\n", data2);375 return 0;376}377 378static int tda10045_fwupload(struct dvb_frontend* fe)379{380 struct tda1004x_state* state = fe->demodulator_priv;381 int ret;382 const struct firmware *fw;383 384 /* don't re-upload unless necessary */385 if (tda1004x_check_upload_ok(state) == 0)386 return 0;387 388 /* request the firmware, this will block until someone uploads it */389 printk(KERN_INFO "tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE);390 ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE);391 if (ret) {392 printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");393 return ret;394 }395 396 /* reset chip */397 tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0);398 tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8);399 tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0);400 msleep(10);401 402 /* set parameters */403 tda10045h_set_bandwidth(state, 8000000);404 405 ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10045H_FWPAGE, TDA10045H_CODE_IN);406 release_firmware(fw);407 if (ret)408 return ret;409 printk(KERN_INFO "tda1004x: firmware upload complete\n");410 411 /* wait for DSP to initialise */412 /* DSPREADY doesn't seem to work on the TDA10045H */413 msleep(100);414 415 return tda1004x_check_upload_ok(state);416}417 418static void tda10046_init_plls(struct dvb_frontend* fe)419{420 struct tda1004x_state* state = fe->demodulator_priv;421 int tda10046_clk53m;422 423 if ((state->config->if_freq == TDA10046_FREQ_045) ||424 (state->config->if_freq == TDA10046_FREQ_052))425 tda10046_clk53m = 0;426 else427 tda10046_clk53m = 1;428 429 tda1004x_write_byteI(state, TDA10046H_CONFPLL1, 0xf0);430 if(tda10046_clk53m) {431 printk(KERN_INFO "tda1004x: setting up plls for 53MHz sampling clock\n");432 tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x08); // PLL M = 8433 } else {434 printk(KERN_INFO "tda1004x: setting up plls for 48MHz sampling clock\n");435 tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x03); // PLL M = 3436 }437 if (state->config->xtal_freq == TDA10046_XTAL_4M ) {438 dprintk("%s: setting up PLLs for a 4 MHz Xtal\n", __func__);439 tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0440 } else {441 dprintk("%s: setting up PLLs for a 16 MHz Xtal\n", __func__);442 tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 3); // PLL P = 0, N = 3443 }444 if(tda10046_clk53m)445 tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x67);446 else447 tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x72);448 /* Note clock frequency is handled implicitly */449 switch (state->config->if_freq) {450 case TDA10046_FREQ_045:451 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);452 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);453 break;454 case TDA10046_FREQ_052:455 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);456 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xc7);457 break;458 case TDA10046_FREQ_3617:459 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);460 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x59);461 break;462 case TDA10046_FREQ_3613:463 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);464 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x3f);465 break;466 }467 tda10046h_set_bandwidth(state, 8000000); /* default bandwidth 8 MHz */468 /* let the PLLs settle */469 msleep(120);470}471 472static int tda10046_fwupload(struct dvb_frontend* fe)473{474 struct tda1004x_state* state = fe->demodulator_priv;475 int ret, confc4;476 const struct firmware *fw;477 478 /* reset + wake up chip */479 if (state->config->xtal_freq == TDA10046_XTAL_4M) {480 confc4 = 0;481 } else {482 dprintk("%s: 16MHz Xtal, reducing I2C speed\n", __func__);483 confc4 = 0x80;484 }485 tda1004x_write_byteI(state, TDA1004X_CONFC4, confc4);486 487 tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0);488 /* set GPIO 1 and 3 */489 if (state->config->gpio_config != TDA10046_GPTRI) {490 tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE2, 0x33);491 tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f, state->config->gpio_config &0x0f);492 }493 /* let the clocks recover from sleep */494 msleep(10);495 496 /* The PLLs need to be reprogrammed after sleep */497 tda10046_init_plls(fe);498 tda1004x_write_mask(state, TDA1004X_CONFADC2, 0xc0, 0);499 500 /* don't re-upload unless necessary */501 if (tda1004x_check_upload_ok(state) == 0)502 return 0;503 504 /*505 For i2c normal work, we need to slow down the bus speed.506 However, the slow down breaks the eeprom firmware load.507 So, use normal speed for eeprom booting and then restore the508 i2c speed after that. Tested with MSI TV @nyware A/D board,509 that comes with firmware version 29 inside their eeprom.510 511 It should also be noticed that no other I2C transfer should512 be in course while booting from eeprom, otherwise, tda10046513 goes into an instable state. So, proper locking are needed514 at the i2c bus master.515 */516 printk(KERN_INFO "tda1004x: trying to boot from eeprom\n");517 tda1004x_write_byteI(state, TDA1004X_CONFC4, 4);518 msleep(300);519 tda1004x_write_byteI(state, TDA1004X_CONFC4, confc4);520 521 /* Checks if eeprom firmware went without troubles */522 if (tda1004x_check_upload_ok(state) == 0)523 return 0;524 525 /* eeprom firmware didn't work. Load one manually. */526 527 if (state->config->request_firmware != NULL) {528 /* request the firmware, this will block until someone uploads it */529 printk(KERN_INFO "tda1004x: waiting for firmware upload...\n");530 ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE);531 if (ret) {532 /* remain compatible to old bug: try to load with tda10045 image name */533 ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE);534 if (ret) {535 printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");536 return ret;537 } else {538 printk(KERN_INFO "tda1004x: please rename the firmware file to %s\n",539 TDA10046_DEFAULT_FIRMWARE);540 }541 }542 } else {543 printk(KERN_ERR "tda1004x: no request function defined, can't upload from file\n");544 return -EIO;545 }546 tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST547 ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN);548 release_firmware(fw);549 return tda1004x_check_upload_ok(state);550}551 552static int tda1004x_encode_fec(int fec)553{554 // convert known FEC values555 switch (fec) {556 case FEC_1_2:557 return 0;558 case FEC_2_3:559 return 1;560 case FEC_3_4:561 return 2;562 case FEC_5_6:563 return 3;564 case FEC_7_8:565 return 4;566 }567 568 // unsupported569 return -EINVAL;570}571 572static int tda1004x_decode_fec(int tdafec)573{574 // convert known FEC values575 switch (tdafec) {576 case 0:577 return FEC_1_2;578 case 1:579 return FEC_2_3;580 case 2:581 return FEC_3_4;582 case 3:583 return FEC_5_6;584 case 4:585 return FEC_7_8;586 }587 588 // unsupported589 return -1;590}591 592static int tda1004x_write(struct dvb_frontend* fe, const u8 buf[], int len)593{594 struct tda1004x_state* state = fe->demodulator_priv;595 596 if (len != 2)597 return -EINVAL;598 599 return tda1004x_write_byteI(state, buf[0], buf[1]);600}601 602static int tda10045_init(struct dvb_frontend* fe)603{604 struct tda1004x_state* state = fe->demodulator_priv;605 606 dprintk("%s\n", __func__);607 608 if (tda10045_fwupload(fe)) {609 printk("tda1004x: firmware upload failed\n");610 return -EIO;611 }612 613 tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0); // wake up the ADC614 615 // tda setup616 tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer617 tda1004x_write_mask(state, TDA1004X_AUTO, 8, 0); // select HP stream618 tda1004x_write_mask(state, TDA1004X_CONFC1, 0x40, 0); // set polarity of VAGC signal619 tda1004x_write_mask(state, TDA1004X_CONFC1, 0x80, 0x80); // enable pulse killer620 tda1004x_write_mask(state, TDA1004X_AUTO, 0x10, 0x10); // enable auto offset621 tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0xC0, 0x0); // no frequency offset622 tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 0); // setup MPEG2 TS interface623 tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0); // setup MPEG2 TS interface624 tda1004x_write_mask(state, TDA1004X_VBER_MSB, 0xe0, 0xa0); // 10^6 VBER measurement bits625 tda1004x_write_mask(state, TDA1004X_CONFC1, 0x10, 0); // VAGC polarity626 tda1004x_write_byteI(state, TDA1004X_CONFADC1, 0x2e);627 628 tda1004x_write_mask(state, 0x1f, 0x01, state->config->invert_oclk);629 630 return 0;631}632 633static int tda10046_init(struct dvb_frontend* fe)634{635 struct tda1004x_state* state = fe->demodulator_priv;636 dprintk("%s\n", __func__);637 638 if (tda10046_fwupload(fe)) {639 printk("tda1004x: firmware upload failed\n");640 return -EIO;641 }642 643 // tda setup644 tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer645 tda1004x_write_byteI(state, TDA1004X_AUTO, 0x87); // 100 ppm crystal, select HP stream646 tda1004x_write_byteI(state, TDA1004X_CONFC1, 0x88); // enable pulse killer647 648 switch (state->config->agc_config) {649 case TDA10046_AGC_DEFAULT:650 tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x00); // AGC setup651 tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60); // set AGC polarities652 break;653 case TDA10046_AGC_IFO_AUTO_NEG:654 tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup655 tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60); // set AGC polarities656 break;657 case TDA10046_AGC_IFO_AUTO_POS:658 tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup659 tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x00); // set AGC polarities660 break;661 case TDA10046_AGC_TDA827X:662 tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup663 tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold664 tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize665 tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60); // set AGC polarities666 break;667 }668 if (state->config->ts_mode == 0) {669 tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0xc0, 0x40);670 tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7);671 } else {672 tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0xc0, 0x80);673 tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x10,674 state->config->invert_oclk << 4);675 }676 tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);677 tda1004x_write_mask (state, TDA10046H_CONF_TRISTATE1, 0x3e, 0x38); // Turn IF AGC output on678 tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MIN, 0); // }679 tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MAX, 0xff); // } AGC min/max values680 tda1004x_write_byteI(state, TDA10046H_AGC_IF_MIN, 0); // }681 tda1004x_write_byteI(state, TDA10046H_AGC_IF_MAX, 0xff); // }682 tda1004x_write_byteI(state, TDA10046H_AGC_GAINS, 0x12); // IF gain 2, TUN gain 1683 tda1004x_write_byteI(state, TDA10046H_CVBER_CTRL, 0x1a); // 10^6 VBER measurement bits684 tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 7); // MPEG2 interface config685 tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0xc0); // MPEG2 interface config686 // tda1004x_write_mask(state, 0x50, 0x80, 0x80); // handle out of guard echoes687 688 return 0;689}690 691static int tda1004x_set_fe(struct dvb_frontend *fe)692{693 struct dtv_frontend_properties *fe_params = &fe->dtv_property_cache;694 struct tda1004x_state* state = fe->demodulator_priv;695 int tmp;696 int inversion;697 698 dprintk("%s\n", __func__);699 700 if (state->demod_type == TDA1004X_DEMOD_TDA10046) {701 // setup auto offset702 tda1004x_write_mask(state, TDA1004X_AUTO, 0x10, 0x10);703 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x80, 0);704 tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0xC0, 0);705 706 // disable agc_conf[2]707 tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 0);708 }709 710 // set frequency711 if (fe->ops.tuner_ops.set_params) {712 fe->ops.tuner_ops.set_params(fe);713 if (fe->ops.i2c_gate_ctrl)714 fe->ops.i2c_gate_ctrl(fe, 0);715 }716 717 // Hardcoded to use auto as much as possible on the TDA10045 as it718 // is very unreliable if AUTO mode is _not_ used.719 if (state->demod_type == TDA1004X_DEMOD_TDA10045) {720 fe_params->code_rate_HP = FEC_AUTO;721 fe_params->guard_interval = GUARD_INTERVAL_AUTO;722 fe_params->transmission_mode = TRANSMISSION_MODE_AUTO;723 }724 725 // Set standard params.. or put them to auto726 if ((fe_params->code_rate_HP == FEC_AUTO) ||727 (fe_params->code_rate_LP == FEC_AUTO) ||728 (fe_params->modulation == QAM_AUTO) ||729 (fe_params->hierarchy == HIERARCHY_AUTO)) {730 tda1004x_write_mask(state, TDA1004X_AUTO, 1, 1); // enable auto731 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x03, 0); /* turn off modulation bits */732 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0); // turn off hierarchy bits733 tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x3f, 0); // turn off FEC bits734 } else {735 tda1004x_write_mask(state, TDA1004X_AUTO, 1, 0); // disable auto736 737 // set HP FEC738 tmp = tda1004x_encode_fec(fe_params->code_rate_HP);739 if (tmp < 0)740 return tmp;741 tda1004x_write_mask(state, TDA1004X_IN_CONF2, 7, tmp);742 743 // set LP FEC744 tmp = tda1004x_encode_fec(fe_params->code_rate_LP);745 if (tmp < 0)746 return tmp;747 tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x38, tmp << 3);748 749 /* set modulation */750 switch (fe_params->modulation) {751 case QPSK:752 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 0);753 break;754 755 case QAM_16:756 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 1);757 break;758 759 case QAM_64:760 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 2);761 break;762 763 default:764 return -EINVAL;765 }766 767 // set hierarchy768 switch (fe_params->hierarchy) {769 case HIERARCHY_NONE:770 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0 << 5);771 break;772 773 case HIERARCHY_1:774 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 1 << 5);775 break;776 777 case HIERARCHY_2:778 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 2 << 5);779 break;780 781 case HIERARCHY_4:782 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 3 << 5);783 break;784 785 default:786 return -EINVAL;787 }788 }789 790 // set bandwidth791 switch (state->demod_type) {792 case TDA1004X_DEMOD_TDA10045:793 tda10045h_set_bandwidth(state, fe_params->bandwidth_hz);794 break;795 796 case TDA1004X_DEMOD_TDA10046:797 tda10046h_set_bandwidth(state, fe_params->bandwidth_hz);798 break;799 }800 801 // set inversion802 inversion = fe_params->inversion;803 if (state->config->invert)804 inversion = inversion ? INVERSION_OFF : INVERSION_ON;805 switch (inversion) {806 case INVERSION_OFF:807 tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0);808 break;809 810 case INVERSION_ON:811 tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0x20);812 break;813 814 default:815 return -EINVAL;816 }817 818 // set guard interval819 switch (fe_params->guard_interval) {820 case GUARD_INTERVAL_1_32:821 tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);822 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 0 << 2);823 break;824 825 case GUARD_INTERVAL_1_16:826 tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);827 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 1 << 2);828 break;829 830 case GUARD_INTERVAL_1_8:831 tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);832 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 2 << 2);833 break;834 835 case GUARD_INTERVAL_1_4:836 tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);837 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 3 << 2);838 break;839 840 case GUARD_INTERVAL_AUTO:841 tda1004x_write_mask(state, TDA1004X_AUTO, 2, 2);842 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 0 << 2);843 break;844 845 default:846 return -EINVAL;847 }848 849 // set transmission mode850 switch (fe_params->transmission_mode) {851 case TRANSMISSION_MODE_2K:852 tda1004x_write_mask(state, TDA1004X_AUTO, 4, 0);853 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 0 << 4);854 break;855 856 case TRANSMISSION_MODE_8K:857 tda1004x_write_mask(state, TDA1004X_AUTO, 4, 0);858 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 1 << 4);859 break;860 861 case TRANSMISSION_MODE_AUTO:862 tda1004x_write_mask(state, TDA1004X_AUTO, 4, 4);863 tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 0);864 break;865 866 default:867 return -EINVAL;868 }869 870 // start the lock871 switch (state->demod_type) {872 case TDA1004X_DEMOD_TDA10045:873 tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8);874 tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0);875 break;876 877 case TDA1004X_DEMOD_TDA10046:878 tda1004x_write_mask(state, TDA1004X_AUTO, 0x40, 0x40);879 msleep(1);880 tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 1);881 break;882 }883 884 msleep(10);885 886 return 0;887}888 889static int tda1004x_get_fe(struct dvb_frontend *fe,890 struct dtv_frontend_properties *fe_params)891{892 struct tda1004x_state* state = fe->demodulator_priv;893 int status;894 895 dprintk("%s\n", __func__);896 897 status = tda1004x_read_byte(state, TDA1004X_STATUS_CD);898 if (status == -1)899 return -EIO;900 901 /* Only update the properties cache if device is locked */902 if (!(status & 8))903 return 0;904 905 // inversion status906 fe_params->inversion = INVERSION_OFF;907 if (tda1004x_read_byte(state, TDA1004X_CONFC1) & 0x20)908 fe_params->inversion = INVERSION_ON;909 if (state->config->invert)910 fe_params->inversion = fe_params->inversion ? INVERSION_OFF : INVERSION_ON;911 912 // bandwidth913 switch (state->demod_type) {914 case TDA1004X_DEMOD_TDA10045:915 switch (tda1004x_read_byte(state, TDA10045H_WREF_LSB)) {916 case 0x14:917 fe_params->bandwidth_hz = 8000000;918 break;919 case 0xdb:920 fe_params->bandwidth_hz = 7000000;921 break;922 case 0x4f:923 fe_params->bandwidth_hz = 6000000;924 break;925 }926 break;927 case TDA1004X_DEMOD_TDA10046:928 switch (tda1004x_read_byte(state, TDA10046H_TIME_WREF1)) {929 case 0x5c:930 case 0x54:931 fe_params->bandwidth_hz = 8000000;932 break;933 case 0x6a:934 case 0x60:935 fe_params->bandwidth_hz = 7000000;936 break;937 case 0x7b:938 case 0x70:939 fe_params->bandwidth_hz = 6000000;940 break;941 }942 break;943 }944 945 // FEC946 fe_params->code_rate_HP =947 tda1004x_decode_fec(tda1004x_read_byte(state, TDA1004X_OUT_CONF2) & 7);948 fe_params->code_rate_LP =949 tda1004x_decode_fec((tda1004x_read_byte(state, TDA1004X_OUT_CONF2) >> 3) & 7);950 951 /* modulation */952 switch (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 3) {953 case 0:954 fe_params->modulation = QPSK;955 break;956 case 1:957 fe_params->modulation = QAM_16;958 break;959 case 2:960 fe_params->modulation = QAM_64;961 break;962 }963 964 // transmission mode965 fe_params->transmission_mode = TRANSMISSION_MODE_2K;966 if (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x10)967 fe_params->transmission_mode = TRANSMISSION_MODE_8K;968 969 // guard interval970 switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x0c) >> 2) {971 case 0:972 fe_params->guard_interval = GUARD_INTERVAL_1_32;973 break;974 case 1:975 fe_params->guard_interval = GUARD_INTERVAL_1_16;976 break;977 case 2:978 fe_params->guard_interval = GUARD_INTERVAL_1_8;979 break;980 case 3:981 fe_params->guard_interval = GUARD_INTERVAL_1_4;982 break;983 }984 985 // hierarchy986 switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x60) >> 5) {987 case 0:988 fe_params->hierarchy = HIERARCHY_NONE;989 break;990 case 1:991 fe_params->hierarchy = HIERARCHY_1;992 break;993 case 2:994 fe_params->hierarchy = HIERARCHY_2;995 break;996 case 3:997 fe_params->hierarchy = HIERARCHY_4;998 break;999 }1000 1001 return 0;1002}1003 1004static int tda1004x_read_status(struct dvb_frontend *fe,1005 enum fe_status *fe_status)1006{1007 struct tda1004x_state* state = fe->demodulator_priv;1008 int status;1009 int cber;1010 int vber;1011 1012 dprintk("%s\n", __func__);1013 1014 // read status1015 status = tda1004x_read_byte(state, TDA1004X_STATUS_CD);1016 if (status == -1)1017 return -EIO;1018 1019 // decode1020 *fe_status = 0;1021 if (status & 4)1022 *fe_status |= FE_HAS_SIGNAL;1023 if (status & 2)1024 *fe_status |= FE_HAS_CARRIER;1025 if (status & 8)1026 *fe_status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;1027 1028 // if we don't already have VITERBI (i.e. not LOCKED), see if the viterbi1029 // is getting anything valid1030 if (!(*fe_status & FE_HAS_VITERBI)) {1031 // read the CBER1032 cber = tda1004x_read_byte(state, TDA1004X_CBER_LSB);1033 if (cber == -1)1034 return -EIO;1035 status = tda1004x_read_byte(state, TDA1004X_CBER_MSB);1036 if (status == -1)1037 return -EIO;1038 cber |= (status << 8);1039 // The address 0x20 should be read to cope with a TDA10046 bug1040 tda1004x_read_byte(state, TDA1004X_CBER_RESET);1041 1042 if (cber != 65535)1043 *fe_status |= FE_HAS_VITERBI;1044 }1045 1046 // if we DO have some valid VITERBI output, but don't already have SYNC1047 // bytes (i.e. not LOCKED), see if the RS decoder is getting anything valid.1048 if ((*fe_status & FE_HAS_VITERBI) && (!(*fe_status & FE_HAS_SYNC))) {1049 // read the VBER1050 vber = tda1004x_read_byte(state, TDA1004X_VBER_LSB);1051 if (vber == -1)1052 return -EIO;1053 status = tda1004x_read_byte(state, TDA1004X_VBER_MID);1054 if (status == -1)1055 return -EIO;1056 vber |= (status << 8);1057 status = tda1004x_read_byte(state, TDA1004X_VBER_MSB);1058 if (status == -1)1059 return -EIO;1060 vber |= (status & 0x0f) << 16;1061 // The CVBER_LUT should be read to cope with TDA10046 hardware bug1062 tda1004x_read_byte(state, TDA1004X_CVBER_LUT);1063 1064 // if RS has passed some valid TS packets, then we must be1065 // getting some SYNC bytes1066 if (vber < 16632)1067 *fe_status |= FE_HAS_SYNC;1068 }1069 1070 // success1071 dprintk("%s: fe_status=0x%x\n", __func__, *fe_status);1072 return 0;1073}1074 1075static int tda1004x_read_signal_strength(struct dvb_frontend* fe, u16 * signal)1076{1077 struct tda1004x_state* state = fe->demodulator_priv;1078 int tmp;1079 int reg = 0;1080 1081 dprintk("%s\n", __func__);1082 1083 // determine the register to use1084 switch (state->demod_type) {1085 case TDA1004X_DEMOD_TDA10045:1086 reg = TDA10045H_S_AGC;1087 break;1088 1089 case TDA1004X_DEMOD_TDA10046:1090 reg = TDA10046H_AGC_IF_LEVEL;1091 break;1092 }1093 1094 // read it1095 tmp = tda1004x_read_byte(state, reg);1096 if (tmp < 0)1097 return -EIO;1098 1099 *signal = (tmp << 8) | tmp;1100 dprintk("%s: signal=0x%x\n", __func__, *signal);1101 return 0;1102}1103 1104static int tda1004x_read_snr(struct dvb_frontend* fe, u16 * snr)1105{1106 struct tda1004x_state* state = fe->demodulator_priv;1107 int tmp;1108 1109 dprintk("%s\n", __func__);1110 1111 // read it1112 tmp = tda1004x_read_byte(state, TDA1004X_SNR);1113 if (tmp < 0)1114 return -EIO;1115 tmp = 255 - tmp;1116 1117 *snr = ((tmp << 8) | tmp);1118 dprintk("%s: snr=0x%x\n", __func__, *snr);1119 return 0;1120}1121 1122static int tda1004x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)1123{1124 struct tda1004x_state* state = fe->demodulator_priv;1125 int tmp;1126 int tmp2;1127 int counter;1128 1129 dprintk("%s\n", __func__);1130 1131 // read the UCBLOCKS and reset1132 counter = 0;1133 tmp = tda1004x_read_byte(state, TDA1004X_UNCOR);1134 if (tmp < 0)1135 return -EIO;1136 tmp &= 0x7f;1137 while (counter++ < 5) {1138 tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);1139 tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);1140 tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);1141 1142 tmp2 = tda1004x_read_byte(state, TDA1004X_UNCOR);1143 if (tmp2 < 0)1144 return -EIO;1145 tmp2 &= 0x7f;1146 if ((tmp2 < tmp) || (tmp2 == 0))1147 break;1148 }1149 1150 if (tmp != 0x7f)1151 *ucblocks = tmp;1152 else1153 *ucblocks = 0xffffffff;1154 1155 dprintk("%s: ucblocks=0x%x\n", __func__, *ucblocks);1156 return 0;1157}1158 1159static int tda1004x_read_ber(struct dvb_frontend* fe, u32* ber)1160{1161 struct tda1004x_state* state = fe->demodulator_priv;1162 int tmp;1163 1164 dprintk("%s\n", __func__);1165 1166 // read it in1167 tmp = tda1004x_read_byte(state, TDA1004X_CBER_LSB);1168 if (tmp < 0)1169 return -EIO;1170 *ber = tmp << 1;1171 tmp = tda1004x_read_byte(state, TDA1004X_CBER_MSB);1172 if (tmp < 0)1173 return -EIO;1174 *ber |= (tmp << 9);1175 // The address 0x20 should be read to cope with a TDA10046 bug1176 tda1004x_read_byte(state, TDA1004X_CBER_RESET);1177 1178 dprintk("%s: ber=0x%x\n", __func__, *ber);1179 return 0;1180}1181 1182static int tda1004x_sleep(struct dvb_frontend* fe)1183{1184 struct tda1004x_state* state = fe->demodulator_priv;1185 int gpio_conf;1186 1187 switch (state->demod_type) {1188 case TDA1004X_DEMOD_TDA10045:1189 tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0x10);1190 break;1191 1192 case TDA1004X_DEMOD_TDA10046:1193 /* set outputs to tristate */1194 tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0xff);1195 /* invert GPIO 1 and 3 if desired*/1196 gpio_conf = state->config->gpio_config;1197 if (gpio_conf >= TDA10046_GP00_I)1198 tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f,1199 (gpio_conf & 0x0f) ^ 0x0a);1200 1201 tda1004x_write_mask(state, TDA1004X_CONFADC2, 0xc0, 0xc0);1202 tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1);1203 break;1204 }1205 1206 return 0;1207}1208 1209static int tda1004x_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)1210{1211 struct tda1004x_state* state = fe->demodulator_priv;1212 1213 if (enable) {1214 return tda1004x_enable_tuner_i2c(state);1215 } else {1216 return tda1004x_disable_tuner_i2c(state);1217 }1218}1219 1220static int tda1004x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)1221{1222 fesettings->min_delay_ms = 800;1223 /* Drift compensation makes no sense for DVB-T */1224 fesettings->step_size = 0;1225 fesettings->max_drift = 0;1226 return 0;1227}1228 1229static void tda1004x_release(struct dvb_frontend* fe)1230{1231 struct tda1004x_state *state = fe->demodulator_priv;1232 kfree(state);1233}1234 1235static const struct dvb_frontend_ops tda10045_ops = {1236 .delsys = { SYS_DVBT },1237 .info = {1238 .name = "Philips TDA10045H DVB-T",1239 .frequency_min_hz = 51 * MHz,1240 .frequency_max_hz = 858 * MHz,1241 .frequency_stepsize_hz = 166667,1242 .caps =1243 FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |1244 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |1245 FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |1246 FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO1247 },1248 1249 .release = tda1004x_release,1250 1251 .init = tda10045_init,1252 .sleep = tda1004x_sleep,1253 .write = tda1004x_write,1254 .i2c_gate_ctrl = tda1004x_i2c_gate_ctrl,1255 1256 .set_frontend = tda1004x_set_fe,1257 .get_frontend = tda1004x_get_fe,1258 .get_tune_settings = tda1004x_get_tune_settings,1259 1260 .read_status = tda1004x_read_status,1261 .read_ber = tda1004x_read_ber,1262 .read_signal_strength = tda1004x_read_signal_strength,1263 .read_snr = tda1004x_read_snr,1264 .read_ucblocks = tda1004x_read_ucblocks,1265};1266 1267struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,1268 struct i2c_adapter* i2c)1269{1270 struct tda1004x_state *state;1271 int id;1272 1273 /* allocate memory for the internal state */1274 state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);1275 if (!state) {1276 printk(KERN_ERR "Can't allocate memory for tda10045 state\n");1277 return NULL;1278 }1279 1280 /* setup the state */1281 state->config = config;1282 state->i2c = i2c;1283 state->demod_type = TDA1004X_DEMOD_TDA10045;1284 1285 /* check if the demod is there */1286 id = tda1004x_read_byte(state, TDA1004X_CHIPID);1287 if (id < 0) {1288 printk(KERN_ERR "tda10045: chip is not answering. Giving up.\n");1289 kfree(state);1290 return NULL;1291 }1292 1293 if (id != 0x25) {1294 printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);1295 kfree(state);1296 return NULL;1297 }1298 1299 /* create dvb_frontend */1300 memcpy(&state->frontend.ops, &tda10045_ops, sizeof(struct dvb_frontend_ops));1301 state->frontend.demodulator_priv = state;1302 return &state->frontend;1303}1304 1305static const struct dvb_frontend_ops tda10046_ops = {1306 .delsys = { SYS_DVBT },1307 .info = {1308 .name = "Philips TDA10046H DVB-T",1309 .frequency_min_hz = 51 * MHz,1310 .frequency_max_hz = 858 * MHz,1311 .frequency_stepsize_hz = 166667,1312 .caps =1313 FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |1314 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |1315 FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |1316 FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO1317 },1318 1319 .release = tda1004x_release,1320 1321 .init = tda10046_init,1322 .sleep = tda1004x_sleep,1323 .write = tda1004x_write,1324 .i2c_gate_ctrl = tda1004x_i2c_gate_ctrl,1325 1326 .set_frontend = tda1004x_set_fe,1327 .get_frontend = tda1004x_get_fe,1328 .get_tune_settings = tda1004x_get_tune_settings,1329 1330 .read_status = tda1004x_read_status,1331 .read_ber = tda1004x_read_ber,1332 .read_signal_strength = tda1004x_read_signal_strength,1333 .read_snr = tda1004x_read_snr,1334 .read_ucblocks = tda1004x_read_ucblocks,1335};1336 1337struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,1338 struct i2c_adapter* i2c)1339{1340 struct tda1004x_state *state;1341 int id;1342 1343 /* allocate memory for the internal state */1344 state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL);1345 if (!state) {1346 printk(KERN_ERR "Can't allocate memory for tda10046 state\n");1347 return NULL;1348 }1349 1350 /* setup the state */1351 state->config = config;1352 state->i2c = i2c;1353 state->demod_type = TDA1004X_DEMOD_TDA10046;1354 1355 /* check if the demod is there */1356 id = tda1004x_read_byte(state, TDA1004X_CHIPID);1357 if (id < 0) {1358 printk(KERN_ERR "tda10046: chip is not answering. Giving up.\n");1359 kfree(state);1360 return NULL;1361 }1362 if (id != 0x46) {1363 printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);1364 kfree(state);1365 return NULL;1366 }1367 1368 /* create dvb_frontend */1369 memcpy(&state->frontend.ops, &tda10046_ops, sizeof(struct dvb_frontend_ops));1370 state->frontend.demodulator_priv = state;1371 return &state->frontend;1372}1373 1374module_param(debug, int, 0644);1375MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");1376 1377MODULE_DESCRIPTION("Philips TDA10045H & TDA10046H DVB-T Demodulator");1378MODULE_AUTHOR("Andrew de Quincey & Robert Schlabbach");1379MODULE_LICENSE("GPL");1380 1381EXPORT_SYMBOL_GPL(tda10045_attach);1382EXPORT_SYMBOL_GPL(tda10046_attach);1383