brintos

brintos / linux-shallow public Read only

0
0
Text · 10.2 KiB · 16072a9 Raw
383 lines · c
1// SPDX-License-Identifier: GPL-2.0-only2/*3 * Copyright (C) 2005-2006 Micronas USA Inc.4 */5 6#include <linux/module.h>7#include <linux/init.h>8#include <linux/i2c.h>9#include <linux/videodev2.h>10#include <media/tuner.h>11#include <media/v4l2-common.h>12#include <media/v4l2-ioctl.h>13#include <media/v4l2-device.h>14#include <linux/slab.h>15 16MODULE_DESCRIPTION("sony-btf-mpx driver");17MODULE_LICENSE("GPL v2");18 19static int debug;20module_param(debug, int, 0644);21MODULE_PARM_DESC(debug, "debug level 0=off(default) 1=on");22 23/* #define MPX_DEBUG */24 25/*26 * Note:27 *28 * AS(IF/MPX) pin:      LOW      HIGH/OPEN29 * IF/MPX address:   0x42/0x40   0x43/0x4430 */31 32 33static int force_mpx_mode = -1;34module_param(force_mpx_mode, int, 0644);35 36struct sony_btf_mpx {37	struct v4l2_subdev sd;38	int mpxmode;39	u32 audmode;40};41 42static inline struct sony_btf_mpx *to_state(struct v4l2_subdev *sd)43{44	return container_of(sd, struct sony_btf_mpx, sd);45}46 47static int mpx_write(struct i2c_client *client, int dev, int addr, int val)48{49	u8 buffer[5];50	struct i2c_msg msg;51 52	buffer[0] = dev;53	buffer[1] = addr >> 8;54	buffer[2] = addr & 0xff;55	buffer[3] = val >> 8;56	buffer[4] = val & 0xff;57	msg.addr = client->addr;58	msg.flags = 0;59	msg.len = 5;60	msg.buf = buffer;61	i2c_transfer(client->adapter, &msg, 1);62	return 0;63}64 65/*66 * MPX register values for the BTF-PG472Z:67 *68 *                                 FM_     NICAM_  SCART_69 *          MODUS  SOURCE    ACB   PRESCAL PRESCAL PRESCAL SYSTEM  VOLUME70 *         10/0030 12/0008 12/0013 12/000E 12/0010 12/0000 10/0020 12/000071 *         ---------------------------------------------------------------72 * Auto     1003    0020    0100    2603    5000    XXXX    0001    750073 *74 * B/G75 *  Mono    1003    0020    0100    2603    5000    XXXX    0003    750076 *  A2      1003    0020    0100    2601    5000    XXXX    0003    750077 *  NICAM   1003    0120    0100    2603    5000    XXXX    0008    750078 *79 * I80 *  Mono    1003    0020    0100    2603    7900    XXXX    000A    750081 *  NICAM   1003    0120    0100    2603    7900    XXXX    000A    750082 *83 * D/K84 *  Mono    1003    0020    0100    2603    5000    XXXX    0004    750085 *  A2-1    1003    0020    0100    2601    5000    XXXX    0004    750086 *  A2-2    1003    0020    0100    2601    5000    XXXX    0005    750087 *  A2-3    1003    0020    0100    2601    5000    XXXX    0007    750088 *  NICAM   1003    0120    0100    2603    5000    XXXX    000B    750089 *90 * L/L'91 *  Mono    0003    0200    0100    7C03    5000    2200    0009    750092 *  NICAM   0003    0120    0100    7C03    5000    XXXX    0009    750093 *94 * M95 *  Mono    1003    0200    0100    2B03    5000    2B00    0002    750096 *97 * For Asia, replace the 0x26XX in FM_PRESCALE with 0x14XX.98 *99 * Bilingual selection in A2/NICAM:100 *101 *         High byte of SOURCE     Left chan   Right chan102 *                 0x01              MAIN         SUB103 *                 0x03              MAIN         MAIN104 *                 0x04              SUB          SUB105 *106 * Force mono in NICAM by setting the high byte of SOURCE to 0x02 (L/L') or107 * 0x00 (all other bands).  Force mono in A2 with FMONO_A2:108 *109 *                      FMONO_A2110 *                      10/0022111 *                      --------112 *     Forced mono ON     07F0113 *     Forced mono OFF    0190114 */115 116static const struct {117	enum { AUD_MONO, AUD_A2, AUD_NICAM, AUD_NICAM_L } audio_mode;118	u16 modus;119	u16 source;120	u16 acb;121	u16 fm_prescale;122	u16 nicam_prescale;123	u16 scart_prescale;124	u16 system;125	u16 volume;126} mpx_audio_modes[] = {127	/* Auto */	{ AUD_MONO,	0x1003, 0x0020, 0x0100, 0x2603,128					0x5000, 0x0000, 0x0001, 0x7500 },129	/* B/G Mono */	{ AUD_MONO,	0x1003, 0x0020, 0x0100, 0x2603,130					0x5000, 0x0000, 0x0003, 0x7500 },131	/* B/G A2 */	{ AUD_A2,	0x1003, 0x0020, 0x0100, 0x2601,132					0x5000, 0x0000, 0x0003, 0x7500 },133	/* B/G NICAM */ { AUD_NICAM,	0x1003, 0x0120, 0x0100, 0x2603,134					0x5000, 0x0000, 0x0008, 0x7500 },135	/* I Mono */	{ AUD_MONO,	0x1003, 0x0020, 0x0100, 0x2603,136					0x7900, 0x0000, 0x000A, 0x7500 },137	/* I NICAM */	{ AUD_NICAM,	0x1003, 0x0120, 0x0100, 0x2603,138					0x7900, 0x0000, 0x000A, 0x7500 },139	/* D/K Mono */	{ AUD_MONO,	0x1003, 0x0020, 0x0100, 0x2603,140					0x5000, 0x0000, 0x0004, 0x7500 },141	/* D/K A2-1 */	{ AUD_A2,	0x1003, 0x0020, 0x0100, 0x2601,142					0x5000, 0x0000, 0x0004, 0x7500 },143	/* D/K A2-2 */	{ AUD_A2,	0x1003, 0x0020, 0x0100, 0x2601,144					0x5000, 0x0000, 0x0005, 0x7500 },145	/* D/K A2-3 */	{ AUD_A2,	0x1003, 0x0020, 0x0100, 0x2601,146					0x5000, 0x0000, 0x0007, 0x7500 },147	/* D/K NICAM */	{ AUD_NICAM,	0x1003, 0x0120, 0x0100, 0x2603,148					0x5000, 0x0000, 0x000B, 0x7500 },149	/* L/L' Mono */	{ AUD_MONO,	0x0003, 0x0200, 0x0100, 0x7C03,150					0x5000, 0x2200, 0x0009, 0x7500 },151	/* L/L' NICAM */{ AUD_NICAM_L,	0x0003, 0x0120, 0x0100, 0x7C03,152					0x5000, 0x0000, 0x0009, 0x7500 },153};154 155#define MPX_NUM_MODES	ARRAY_SIZE(mpx_audio_modes)156 157static int mpx_setup(struct sony_btf_mpx *t)158{159	struct i2c_client *client = v4l2_get_subdevdata(&t->sd);160	u16 source = 0;161	u8 buffer[3];162	struct i2c_msg msg;163	int mode = t->mpxmode;164 165	/* reset MPX */166	buffer[0] = 0x00;167	buffer[1] = 0x80;168	buffer[2] = 0x00;169	msg.addr = client->addr;170	msg.flags = 0;171	msg.len = 3;172	msg.buf = buffer;173	i2c_transfer(client->adapter, &msg, 1);174	buffer[1] = 0x00;175	i2c_transfer(client->adapter, &msg, 1);176 177	if (t->audmode != V4L2_TUNER_MODE_MONO)178		mode++;179 180	if (mpx_audio_modes[mode].audio_mode != AUD_MONO) {181		switch (t->audmode) {182		case V4L2_TUNER_MODE_MONO:183			switch (mpx_audio_modes[mode].audio_mode) {184			case AUD_A2:185				source = mpx_audio_modes[mode].source;186				break;187			case AUD_NICAM:188				source = 0x0000;189				break;190			case AUD_NICAM_L:191				source = 0x0200;192				break;193			default:194				break;195			}196			break;197		case V4L2_TUNER_MODE_STEREO:198			source = mpx_audio_modes[mode].source;199			break;200		case V4L2_TUNER_MODE_LANG1:201			source = 0x0300;202			break;203		case V4L2_TUNER_MODE_LANG2:204			source = 0x0400;205			break;206		}207		source |= mpx_audio_modes[mode].source & 0x00ff;208	} else209		source = mpx_audio_modes[mode].source;210 211	mpx_write(client, 0x10, 0x0030, mpx_audio_modes[mode].modus);212	mpx_write(client, 0x12, 0x0008, source);213	mpx_write(client, 0x12, 0x0013, mpx_audio_modes[mode].acb);214	mpx_write(client, 0x12, 0x000e,215			mpx_audio_modes[mode].fm_prescale);216	mpx_write(client, 0x12, 0x0010,217			mpx_audio_modes[mode].nicam_prescale);218	mpx_write(client, 0x12, 0x000d,219			mpx_audio_modes[mode].scart_prescale);220	mpx_write(client, 0x10, 0x0020, mpx_audio_modes[mode].system);221	mpx_write(client, 0x12, 0x0000, mpx_audio_modes[mode].volume);222	if (mpx_audio_modes[mode].audio_mode == AUD_A2)223		mpx_write(client, 0x10, 0x0022,224			t->audmode == V4L2_TUNER_MODE_MONO ? 0x07f0 : 0x0190);225 226#ifdef MPX_DEBUG227	{228		u8 buf1[3], buf2[2];229		struct i2c_msg msgs[2];230 231		v4l2_info(client,232			"MPX registers: %04x %04x %04x %04x %04x %04x %04x %04x\n",233			mpx_audio_modes[mode].modus,234			source,235			mpx_audio_modes[mode].acb,236			mpx_audio_modes[mode].fm_prescale,237			mpx_audio_modes[mode].nicam_prescale,238			mpx_audio_modes[mode].scart_prescale,239			mpx_audio_modes[mode].system,240			mpx_audio_modes[mode].volume);241		buf1[0] = 0x11;242		buf1[1] = 0x00;243		buf1[2] = 0x7e;244		msgs[0].addr = client->addr;245		msgs[0].flags = 0;246		msgs[0].len = 3;247		msgs[0].buf = buf1;248		msgs[1].addr = client->addr;249		msgs[1].flags = I2C_M_RD;250		msgs[1].len = 2;251		msgs[1].buf = buf2;252		i2c_transfer(client->adapter, msgs, 2);253		v4l2_info(client, "MPX system: %02x%02x\n",254				buf2[0], buf2[1]);255		buf1[0] = 0x11;256		buf1[1] = 0x02;257		buf1[2] = 0x00;258		i2c_transfer(client->adapter, msgs, 2);259		v4l2_info(client, "MPX status: %02x%02x\n",260				buf2[0], buf2[1]);261	}262#endif263	return 0;264}265 266 267static int sony_btf_mpx_s_std(struct v4l2_subdev *sd, v4l2_std_id std)268{269	struct sony_btf_mpx *t = to_state(sd);270	int default_mpx_mode = 0;271 272	if (std & V4L2_STD_PAL_BG)273		default_mpx_mode = 1;274	else if (std & V4L2_STD_PAL_I)275		default_mpx_mode = 4;276	else if (std & V4L2_STD_PAL_DK)277		default_mpx_mode = 6;278	else if (std & V4L2_STD_SECAM_L)279		default_mpx_mode = 11;280 281	if (default_mpx_mode != t->mpxmode) {282		t->mpxmode = default_mpx_mode;283		mpx_setup(t);284	}285	return 0;286}287 288static int sony_btf_mpx_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)289{290	struct sony_btf_mpx *t = to_state(sd);291 292	vt->capability = V4L2_TUNER_CAP_NORM |293		V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 |294		V4L2_TUNER_CAP_LANG2;295	vt->rxsubchans = V4L2_TUNER_SUB_MONO |296		V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 |297		V4L2_TUNER_SUB_LANG2;298	vt->audmode = t->audmode;299	return 0;300}301 302static int sony_btf_mpx_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt)303{304	struct sony_btf_mpx *t = to_state(sd);305 306	if (vt->type != V4L2_TUNER_ANALOG_TV)307		return -EINVAL;308 309	if (vt->audmode != t->audmode) {310		t->audmode = vt->audmode;311		mpx_setup(t);312	}313	return 0;314}315 316/* --------------------------------------------------------------------------*/317 318static const struct v4l2_subdev_tuner_ops sony_btf_mpx_tuner_ops = {319	.s_tuner = sony_btf_mpx_s_tuner,320	.g_tuner = sony_btf_mpx_g_tuner,321};322 323static const struct v4l2_subdev_video_ops sony_btf_mpx_video_ops = {324	.s_std = sony_btf_mpx_s_std,325};326 327static const struct v4l2_subdev_ops sony_btf_mpx_ops = {328	.tuner = &sony_btf_mpx_tuner_ops,329	.video = &sony_btf_mpx_video_ops,330};331 332/* --------------------------------------------------------------------------*/333 334static int sony_btf_mpx_probe(struct i2c_client *client)335{336	struct sony_btf_mpx *t;337	struct v4l2_subdev *sd;338 339	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))340		return -ENODEV;341 342	v4l_info(client, "chip found @ 0x%x (%s)\n",343			client->addr << 1, client->adapter->name);344 345	t = devm_kzalloc(&client->dev, sizeof(*t), GFP_KERNEL);346	if (t == NULL)347		return -ENOMEM;348 349	sd = &t->sd;350	v4l2_i2c_subdev_init(sd, client, &sony_btf_mpx_ops);351 352	/* Initialize sony_btf_mpx */353	t->mpxmode = 0;354	t->audmode = V4L2_TUNER_MODE_STEREO;355 356	return 0;357}358 359static void sony_btf_mpx_remove(struct i2c_client *client)360{361	struct v4l2_subdev *sd = i2c_get_clientdata(client);362 363	v4l2_device_unregister_subdev(sd);364}365 366/* ----------------------------------------------------------------------- */367 368static const struct i2c_device_id sony_btf_mpx_id[] = {369	{ "sony-btf-mpx" },370	{ }371};372MODULE_DEVICE_TABLE(i2c, sony_btf_mpx_id);373 374static struct i2c_driver sony_btf_mpx_driver = {375	.driver = {376		.name	= "sony-btf-mpx",377	},378	.probe = sony_btf_mpx_probe,379	.remove = sony_btf_mpx_remove,380	.id_table = sony_btf_mpx_id,381};382module_i2c_driver(sony_btf_mpx_driver);383