brintos

brintos / linux-shallow public Read only

0
0
Text · 60.7 KiB · e3675c7 Raw
2293 lines · c
1// SPDX-License-Identifier: GPL-2.02//3// tvp5150 - Texas Instruments TVP5150A/AM1 and TVP5151 video decoder driver4//5// Copyright (c) 2005,2006 Mauro Carvalho Chehab <mchehab@kernel.org>6 7#include <dt-bindings/media/tvp5150.h>8#include <linux/i2c.h>9#include <linux/slab.h>10#include <linux/videodev2.h>11#include <linux/delay.h>12#include <linux/gpio/consumer.h>13#include <linux/interrupt.h>14#include <linux/module.h>15#include <linux/of_graph.h>16#include <linux/pm_runtime.h>17#include <linux/regmap.h>18#include <media/v4l2-async.h>19#include <media/v4l2-device.h>20#include <media/v4l2-event.h>21#include <media/v4l2-ctrls.h>22#include <media/v4l2-fwnode.h>23#include <media/v4l2-mc.h>24#include <media/v4l2-rect.h>25 26#include "tvp5150_reg.h"27 28#define TVP5150_H_MAX		720U29#define TVP5150_V_MAX_525_60	480U30#define TVP5150_V_MAX_OTHERS	576U31#define TVP5150_MAX_CROP_LEFT	51132#define TVP5150_MAX_CROP_TOP	12733#define TVP5150_CROP_SHIFT	234#define TVP5150_MBUS_FMT	MEDIA_BUS_FMT_UYVY8_2X835#define TVP5150_FIELD		V4L2_FIELD_ALTERNATE36#define TVP5150_COLORSPACE	V4L2_COLORSPACE_SMPTE170M37#define TVP5150_STD_MASK	(V4L2_STD_NTSC     | \38				 V4L2_STD_NTSC_443 | \39				 V4L2_STD_PAL      | \40				 V4L2_STD_PAL_M    | \41				 V4L2_STD_PAL_N    | \42				 V4L2_STD_PAL_Nc   | \43				 V4L2_STD_SECAM)44 45#define TVP5150_MAX_CONNECTORS	3 /* Check dt-bindings for more information */46 47MODULE_DESCRIPTION("Texas Instruments TVP5150A/TVP5150AM1/TVP5151 video decoder driver");48MODULE_AUTHOR("Mauro Carvalho Chehab");49MODULE_LICENSE("GPL v2");50 51 52static int debug;53module_param(debug, int, 0644);54MODULE_PARM_DESC(debug, "Debug level (0-2)");55 56#define dprintk0(__dev, __arg...) dev_dbg_lvl(__dev, 0, 0, __arg)57 58enum tvp5150_pads {59	TVP5150_PAD_AIP1A,60	TVP5150_PAD_AIP1B,61	TVP5150_PAD_VID_OUT,62	TVP5150_NUM_PADS63};64 65struct tvp5150_connector {66	struct v4l2_fwnode_connector base;67	struct media_entity ent;68	struct media_pad pad;69};70 71struct tvp5150 {72	struct v4l2_subdev sd;73 74	struct media_pad pads[TVP5150_NUM_PADS];75	struct tvp5150_connector connectors[TVP5150_MAX_CONNECTORS];76	struct tvp5150_connector *cur_connector;77	unsigned int connectors_num;78 79	struct v4l2_ctrl_handler hdl;80	struct v4l2_rect rect;81	struct regmap *regmap;82	int irq;83 84	v4l2_std_id norm;	/* Current set standard */85	v4l2_std_id detected_norm;86	u32 input;87	u32 output;88	u32 oe;89	int enable;90	bool lock;91 92	u16 dev_id;93	u16 rom_ver;94 95	enum v4l2_mbus_type mbus_type;96};97 98static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)99{100	return container_of(sd, struct tvp5150, sd);101}102 103static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)104{105	return &container_of(ctrl->handler, struct tvp5150, hdl)->sd;106}107 108static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)109{110	struct tvp5150 *decoder = to_tvp5150(sd);111	int ret, val;112 113	ret = regmap_read(decoder->regmap, addr, &val);114	if (ret < 0)115		return ret;116 117	return val;118}119 120static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,121				const u8 end, int max_line)122{123	u8 buf[16];124	int i = 0, j, len;125 126	if (max_line > 16) {127		dprintk0(sd->dev, "too much data to dump\n");128		return;129	}130 131	for (i = init; i < end; i += max_line) {132		len = (end - i > max_line) ? max_line : end - i;133 134		for (j = 0; j < len; j++)135			buf[j] = tvp5150_read(sd, i + j);136 137		dprintk0(sd->dev, "%s reg %02x = %*ph\n", s, i, len, buf);138	}139}140 141static int tvp5150_log_status(struct v4l2_subdev *sd)142{143	dprintk0(sd->dev, "tvp5150: Video input source selection #1 = 0x%02x\n",144		tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));145	dprintk0(sd->dev, "tvp5150: Analog channel controls = 0x%02x\n",146		tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));147	dprintk0(sd->dev, "tvp5150: Operation mode controls = 0x%02x\n",148		tvp5150_read(sd, TVP5150_OP_MODE_CTL));149	dprintk0(sd->dev, "tvp5150: Miscellaneous controls = 0x%02x\n",150		tvp5150_read(sd, TVP5150_MISC_CTL));151	dprintk0(sd->dev, "tvp5150: Autoswitch mask= 0x%02x\n",152		tvp5150_read(sd, TVP5150_AUTOSW_MSK));153	dprintk0(sd->dev, "tvp5150: Color killer threshold control = 0x%02x\n",154		tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));155	dprintk0(sd->dev, "tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",156		tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),157		tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),158		tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));159	dprintk0(sd->dev, "tvp5150: Brightness control = 0x%02x\n",160		tvp5150_read(sd, TVP5150_BRIGHT_CTL));161	dprintk0(sd->dev, "tvp5150: Color saturation control = 0x%02x\n",162		tvp5150_read(sd, TVP5150_SATURATION_CTL));163	dprintk0(sd->dev, "tvp5150: Hue control = 0x%02x\n",164		tvp5150_read(sd, TVP5150_HUE_CTL));165	dprintk0(sd->dev, "tvp5150: Contrast control = 0x%02x\n",166		tvp5150_read(sd, TVP5150_CONTRAST_CTL));167	dprintk0(sd->dev, "tvp5150: Outputs and data rates select = 0x%02x\n",168		tvp5150_read(sd, TVP5150_DATA_RATE_SEL));169	dprintk0(sd->dev, "tvp5150: Configuration shared pins = 0x%02x\n",170		tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));171	dprintk0(sd->dev, "tvp5150: Active video cropping start = 0x%02x%02x\n",172		tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),173		tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));174	dprintk0(sd->dev, "tvp5150: Active video cropping stop  = 0x%02x%02x\n",175		tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),176		tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));177	dprintk0(sd->dev, "tvp5150: Genlock/RTC = 0x%02x\n",178		tvp5150_read(sd, TVP5150_GENLOCK));179	dprintk0(sd->dev, "tvp5150: Horizontal sync start = 0x%02x\n",180		tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));181	dprintk0(sd->dev, "tvp5150: Vertical blanking start = 0x%02x\n",182		tvp5150_read(sd, TVP5150_VERT_BLANKING_START));183	dprintk0(sd->dev, "tvp5150: Vertical blanking stop = 0x%02x\n",184		tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));185	dprintk0(sd->dev, "tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",186		tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),187		tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));188	dprintk0(sd->dev, "tvp5150: Interrupt reset register B = 0x%02x\n",189		tvp5150_read(sd, TVP5150_INT_RESET_REG_B));190	dprintk0(sd->dev, "tvp5150: Interrupt enable register B = 0x%02x\n",191		tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));192	dprintk0(sd->dev, "tvp5150: Interrupt configuration register B = 0x%02x\n",193		tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));194	dprintk0(sd->dev, "tvp5150: Video standard = 0x%02x\n",195		tvp5150_read(sd, TVP5150_VIDEO_STD));196	dprintk0(sd->dev, "tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",197		tvp5150_read(sd, TVP5150_CB_GAIN_FACT),198		tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));199	dprintk0(sd->dev, "tvp5150: Macrovision on counter = 0x%02x\n",200		tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));201	dprintk0(sd->dev, "tvp5150: Macrovision off counter = 0x%02x\n",202		tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));203	dprintk0(sd->dev, "tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",204		(tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);205	dprintk0(sd->dev, "tvp5150: Device ID = %02x%02x\n",206		tvp5150_read(sd, TVP5150_MSB_DEV_ID),207		tvp5150_read(sd, TVP5150_LSB_DEV_ID));208	dprintk0(sd->dev, "tvp5150: ROM version = (hex) %02x.%02x\n",209		tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),210		tvp5150_read(sd, TVP5150_ROM_MINOR_VER));211	dprintk0(sd->dev, "tvp5150: Vertical line count = 0x%02x%02x\n",212		tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),213		tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));214	dprintk0(sd->dev, "tvp5150: Interrupt status register B = 0x%02x\n",215		tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));216	dprintk0(sd->dev, "tvp5150: Interrupt active register B = 0x%02x\n",217		tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));218	dprintk0(sd->dev, "tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",219		tvp5150_read(sd, TVP5150_STATUS_REG_1),220		tvp5150_read(sd, TVP5150_STATUS_REG_2),221		tvp5150_read(sd, TVP5150_STATUS_REG_3),222		tvp5150_read(sd, TVP5150_STATUS_REG_4),223		tvp5150_read(sd, TVP5150_STATUS_REG_5));224 225	dump_reg_range(sd, "Teletext filter 1",   TVP5150_TELETEXT_FIL1_INI,226			TVP5150_TELETEXT_FIL1_END, 8);227	dump_reg_range(sd, "Teletext filter 2",   TVP5150_TELETEXT_FIL2_INI,228			TVP5150_TELETEXT_FIL2_END, 8);229 230	dprintk0(sd->dev, "tvp5150: Teletext filter enable = 0x%02x\n",231		tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));232	dprintk0(sd->dev, "tvp5150: Interrupt status register A = 0x%02x\n",233		tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));234	dprintk0(sd->dev, "tvp5150: Interrupt enable register A = 0x%02x\n",235		tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));236	dprintk0(sd->dev, "tvp5150: Interrupt configuration = 0x%02x\n",237		tvp5150_read(sd, TVP5150_INT_CONF));238	dprintk0(sd->dev, "tvp5150: VDP status register = 0x%02x\n",239		tvp5150_read(sd, TVP5150_VDP_STATUS_REG));240	dprintk0(sd->dev, "tvp5150: FIFO word count = 0x%02x\n",241		tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));242	dprintk0(sd->dev, "tvp5150: FIFO interrupt threshold = 0x%02x\n",243		tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));244	dprintk0(sd->dev, "tvp5150: FIFO reset = 0x%02x\n",245		tvp5150_read(sd, TVP5150_FIFO_RESET));246	dprintk0(sd->dev, "tvp5150: Line number interrupt = 0x%02x\n",247		tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));248	dprintk0(sd->dev, "tvp5150: Pixel alignment register = 0x%02x%02x\n",249		tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),250		tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));251	dprintk0(sd->dev, "tvp5150: FIFO output control = 0x%02x\n",252		tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));253	dprintk0(sd->dev, "tvp5150: Full field enable = 0x%02x\n",254		tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));255	dprintk0(sd->dev, "tvp5150: Full field mode register = 0x%02x\n",256		tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));257 258	dump_reg_range(sd, "CC   data",   TVP5150_CC_DATA_INI,259			TVP5150_CC_DATA_END, 8);260 261	dump_reg_range(sd, "WSS  data",   TVP5150_WSS_DATA_INI,262			TVP5150_WSS_DATA_END, 8);263 264	dump_reg_range(sd, "VPS  data",   TVP5150_VPS_DATA_INI,265			TVP5150_VPS_DATA_END, 8);266 267	dump_reg_range(sd, "VITC data",   TVP5150_VITC_DATA_INI,268			TVP5150_VITC_DATA_END, 10);269 270	dump_reg_range(sd, "Line mode",   TVP5150_LINE_MODE_INI,271			TVP5150_LINE_MODE_END, 8);272	return 0;273}274 275/****************************************************************************276			Basic functions277 ****************************************************************************/278 279static void tvp5150_selmux(struct v4l2_subdev *sd)280{281	int opmode = 0;282	struct tvp5150 *decoder = to_tvp5150(sd);283	unsigned int mask, val;284	int input = 0;285 286	/* Only tvp5150am1 and tvp5151 have signal generator support */287	if ((decoder->dev_id == 0x5150 && decoder->rom_ver == 0x0400) ||288	    (decoder->dev_id == 0x5151 && decoder->rom_ver == 0x0100)) {289		if (!decoder->enable)290			input = 8;291	}292 293	switch (decoder->input) {294	case TVP5150_COMPOSITE1:295		input |= 2;296		fallthrough;297	case TVP5150_COMPOSITE0:298		break;299	case TVP5150_SVIDEO:300	default:301		input |= 1;302		break;303	}304 305	dev_dbg_lvl(sd->dev, 1, debug,306		    "Selecting video route: route input=%s, output=%s => tvp5150 input=0x%02x, opmode=0x%02x\n",307		    decoder->input == 0 ? "aip1a" :308		    decoder->input == 2 ? "aip1b" : "svideo",309		    decoder->output == 0 ? "normal" : "black-frame-gen",310		    input, opmode);311 312	regmap_write(decoder->regmap, TVP5150_OP_MODE_CTL, opmode);313	regmap_write(decoder->regmap, TVP5150_VD_IN_SRC_SEL_1, input);314 315	/*316	 * Setup the FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK output signals. For317	 * S-Video we output the vertical lock (VLK) signal on FID/GLCO/VLK/HVLK318	 * and set INTREQ/GPCL/VBLK to logic 0. For composite we output the319	 * field indicator (FID) signal on FID/GLCO/VLK/HVLK and set320	 * INTREQ/GPCL/VBLK to logic 1.321	 */322	mask = TVP5150_MISC_CTL_GPCL | TVP5150_MISC_CTL_HVLK;323	if (decoder->input == TVP5150_SVIDEO)324		val = TVP5150_MISC_CTL_HVLK;325	else326		val = TVP5150_MISC_CTL_GPCL;327	regmap_update_bits(decoder->regmap, TVP5150_MISC_CTL, mask, val);328};329 330struct i2c_reg_value {331	unsigned char reg;332	unsigned char value;333};334 335/* Default values as sugested at TVP5150AM1 datasheet */336static const struct i2c_reg_value tvp5150_init_default[] = {337	{ /* 0x00 */338		TVP5150_VD_IN_SRC_SEL_1, 0x00339	},340	{ /* 0x01 */341		TVP5150_ANAL_CHL_CTL, 0x15342	},343	{ /* 0x02 */344		TVP5150_OP_MODE_CTL, 0x00345	},346	{ /* 0x03 */347		TVP5150_MISC_CTL, 0x01348	},349	{ /* 0x06 */350		TVP5150_COLOR_KIL_THSH_CTL, 0x10351	},352	{ /* 0x07 */353		TVP5150_LUMA_PROC_CTL_1, 0x60354	},355	{ /* 0x08 */356		TVP5150_LUMA_PROC_CTL_2, 0x00357	},358	{ /* 0x09 */359		TVP5150_BRIGHT_CTL, 0x80360	},361	{ /* 0x0a */362		TVP5150_SATURATION_CTL, 0x80363	},364	{ /* 0x0b */365		TVP5150_HUE_CTL, 0x00366	},367	{ /* 0x0c */368		TVP5150_CONTRAST_CTL, 0x80369	},370	{ /* 0x0d */371		TVP5150_DATA_RATE_SEL, 0x47372	},373	{ /* 0x0e */374		TVP5150_LUMA_PROC_CTL_3, 0x00375	},376	{ /* 0x0f */377		TVP5150_CONF_SHARED_PIN, 0x08378	},379	{ /* 0x11 */380		TVP5150_ACT_VD_CROP_ST_MSB, 0x00381	},382	{ /* 0x12 */383		TVP5150_ACT_VD_CROP_ST_LSB, 0x00384	},385	{ /* 0x13 */386		TVP5150_ACT_VD_CROP_STP_MSB, 0x00387	},388	{ /* 0x14 */389		TVP5150_ACT_VD_CROP_STP_LSB, 0x00390	},391	{ /* 0x15 */392		TVP5150_GENLOCK, 0x01393	},394	{ /* 0x16 */395		TVP5150_HORIZ_SYNC_START, 0x80396	},397	{ /* 0x18 */398		TVP5150_VERT_BLANKING_START, 0x00399	},400	{ /* 0x19 */401		TVP5150_VERT_BLANKING_STOP, 0x00402	},403	{ /* 0x1a */404		TVP5150_CHROMA_PROC_CTL_1, 0x0c405	},406	{ /* 0x1b */407		TVP5150_CHROMA_PROC_CTL_2, 0x14408	},409	{ /* 0x1c */410		TVP5150_INT_RESET_REG_B, 0x00411	},412	{ /* 0x1d */413		TVP5150_INT_ENABLE_REG_B, 0x00414	},415	{ /* 0x1e */416		TVP5150_INTT_CONFIG_REG_B, 0x00417	},418	{ /* 0x28 */419		TVP5150_VIDEO_STD, 0x00420	},421	{ /* 0x2e */422		TVP5150_MACROVISION_ON_CTR, 0x0f423	},424	{ /* 0x2f */425		TVP5150_MACROVISION_OFF_CTR, 0x01426	},427	{ /* 0xbb */428		TVP5150_TELETEXT_FIL_ENA, 0x00429	},430	{ /* 0xc0 */431		TVP5150_INT_STATUS_REG_A, 0x00432	},433	{ /* 0xc1 */434		TVP5150_INT_ENABLE_REG_A, 0x00435	},436	{ /* 0xc2 */437		TVP5150_INT_CONF, 0x04438	},439	{ /* 0xc8 */440		TVP5150_FIFO_INT_THRESHOLD, 0x80441	},442	{ /* 0xc9 */443		TVP5150_FIFO_RESET, 0x00444	},445	{ /* 0xca */446		TVP5150_LINE_NUMBER_INT, 0x00447	},448	{ /* 0xcb */449		TVP5150_PIX_ALIGN_REG_LOW, 0x4e450	},451	{ /* 0xcc */452		TVP5150_PIX_ALIGN_REG_HIGH, 0x00453	},454	{ /* 0xcd */455		TVP5150_FIFO_OUT_CTRL, 0x01456	},457	{ /* 0xcf */458		TVP5150_FULL_FIELD_ENA, 0x00459	},460	{ /* 0xd0 */461		TVP5150_LINE_MODE_INI, 0x00462	},463	{ /* 0xfc */464		TVP5150_FULL_FIELD_MODE_REG, 0x7f465	},466	{ /* end of data */467		0xff, 0xff468	}469};470 471/* Default values as sugested at TVP5150AM1 datasheet */472static const struct i2c_reg_value tvp5150_init_enable[] = {473	{	/* Automatic offset and AGC enabled */474		TVP5150_ANAL_CHL_CTL, 0x15475	}, {	/* Activate YCrCb output 0x9 or 0xd ? */476		TVP5150_MISC_CTL, TVP5150_MISC_CTL_GPCL |477				  TVP5150_MISC_CTL_INTREQ_OE |478				  TVP5150_MISC_CTL_YCBCR_OE |479				  TVP5150_MISC_CTL_SYNC_OE |480				  TVP5150_MISC_CTL_VBLANK |481				  TVP5150_MISC_CTL_CLOCK_OE,482	}, {	/* Activates video std autodetection for all standards */483		TVP5150_AUTOSW_MSK, 0x0484	}, {	/* Default format: 0x47. For 4:2:2: 0x40 */485		TVP5150_DATA_RATE_SEL, 0x47486	}, {487		TVP5150_CHROMA_PROC_CTL_1, 0x0c488	}, {489		TVP5150_CHROMA_PROC_CTL_2, 0x54490	}, {	/* Non documented, but initialized on WinTV USB2 */491		0x27, 0x20492	}, {493		0xff, 0xff494	}495};496 497struct tvp5150_vbi_type {498	unsigned int vbi_type;499	unsigned int ini_line;500	unsigned int end_line;501	unsigned int by_field :1;502};503 504struct i2c_vbi_ram_value {505	u16 reg;506	struct tvp5150_vbi_type type;507	unsigned char values[16];508};509 510/* This struct have the values for each supported VBI Standard511 * by512 tvp5150_vbi_types should follow the same order as vbi_ram_default513 * value 0 means rom position 0x10, value 1 means rom position 0x30514 * and so on. There are 16 possible locations from 0 to 15.515 */516 517static const struct i2c_vbi_ram_value vbi_ram_default[] = {518 519	/*520	 * FIXME: Current api doesn't handle all VBI types, those not521	 * yet supported are placed under #if 0522	 */523#if 0524	[0] = {0x010, /* Teletext, SECAM, WST System A */525		{V4L2_SLICED_TELETEXT_SECAM, 6, 23, 1},526		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,527		  0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }528	},529#endif530	[1] = {0x030, /* Teletext, PAL, WST System B */531		{V4L2_SLICED_TELETEXT_B, 6, 22, 1},532		{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,533		  0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }534	},535#if 0536	[2] = {0x050, /* Teletext, PAL, WST System C */537		{V4L2_SLICED_TELETEXT_PAL_C, 6, 22, 1},538		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,539		  0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }540	},541	[3] = {0x070, /* Teletext, NTSC, WST System B */542		{V4L2_SLICED_TELETEXT_NTSC_B, 10, 21, 1},543		{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,544		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }545	},546	[4] = {0x090, /* Tetetext, NTSC NABTS System C */547		{V4L2_SLICED_TELETEXT_NTSC_C, 10, 21, 1},548		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,549		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }550	},551	[5] = {0x0b0, /* Teletext, NTSC-J, NABTS System D */552		{V4L2_SLICED_TELETEXT_NTSC_D, 10, 21, 1},553		{ 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,554		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }555	},556	[6] = {0x0d0, /* Closed Caption, PAL/SECAM */557		{V4L2_SLICED_CAPTION_625, 22, 22, 1},558		{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,559		  0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }560	},561#endif562	[7] = {0x0f0, /* Closed Caption, NTSC */563		{V4L2_SLICED_CAPTION_525, 21, 21, 1},564		{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,565		  0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }566	},567	[8] = {0x110, /* Wide Screen Signal, PAL/SECAM */568		{V4L2_SLICED_WSS_625, 23, 23, 1},569		{ 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,570		  0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }571	},572#if 0573	[9] = {0x130, /* Wide Screen Signal, NTSC C */574		{V4L2_SLICED_WSS_525, 20, 20, 1},575		{ 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,576		  0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }577	},578	[10] = {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */579		{V4l2_SLICED_VITC_625, 6, 22, 0},580		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,581		  0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }582	},583	[11] = {0x170, /* Vertical Interval Timecode (VITC), NTSC */584		{V4l2_SLICED_VITC_525, 10, 20, 0},585		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,586		  0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }587	},588#endif589	[12] = {0x190, /* Video Program System (VPS), PAL */590		{V4L2_SLICED_VPS, 16, 16, 0},591		{ 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,592		  0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }593	},594	/* 0x1d0 User programmable */595};596 597static int tvp5150_write_inittab(struct v4l2_subdev *sd,598				const struct i2c_reg_value *regs)599{600	struct tvp5150 *decoder = to_tvp5150(sd);601 602	while (regs->reg != 0xff) {603		regmap_write(decoder->regmap, regs->reg, regs->value);604		regs++;605	}606	return 0;607}608 609static int tvp5150_vdp_init(struct v4l2_subdev *sd)610{611	struct tvp5150 *decoder = to_tvp5150(sd);612	struct regmap *map = decoder->regmap;613	unsigned int i;614	int j;615 616	/* Disable Full Field */617	regmap_write(map, TVP5150_FULL_FIELD_ENA, 0);618 619	/* Before programming, Line mode should be at 0xff */620	for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)621		regmap_write(map, i, 0xff);622 623	/* Load Ram Table */624	for (j = 0; j < ARRAY_SIZE(vbi_ram_default); j++) {625		const struct i2c_vbi_ram_value *regs = &vbi_ram_default[j];626 627		if (!regs->type.vbi_type)628			continue;629 630		regmap_write(map, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);631		regmap_write(map, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);632 633		for (i = 0; i < 16; i++)634			regmap_write(map, TVP5150_VDP_CONF_RAM_DATA,635				     regs->values[i]);636	}637	return 0;638}639 640/* Fills VBI capabilities based on i2c_vbi_ram_value struct */641static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,642				struct v4l2_sliced_vbi_cap *cap)643{644	int line, i;645 646	dev_dbg_lvl(sd->dev, 1, debug, "g_sliced_vbi_cap\n");647	memset(cap, 0, sizeof(*cap));648 649	for (i = 0; i < ARRAY_SIZE(vbi_ram_default); i++) {650		const struct i2c_vbi_ram_value *regs = &vbi_ram_default[i];651 652		if (!regs->type.vbi_type)653			continue;654 655		for (line = regs->type.ini_line;656		     line <= regs->type.end_line;657		     line++) {658			cap->service_lines[0][line] |= regs->type.vbi_type;659		}660		cap->service_set |= regs->type.vbi_type;661	}662	return 0;663}664 665/* Set vbi processing666 * type - one of tvp5150_vbi_types667 * line - line to gather data668 * fields: bit 0 field1, bit 1, field2669 * flags (default=0xf0) is a bitmask, were set means:670 *	bit 7: enable filtering null bytes on CC671 *	bit 6: send data also to FIFO672 *	bit 5: don't allow data with errors on FIFO673 *	bit 4: enable ECC when possible674 * pix_align = pix alignment:675 *	LSB = field1676 *	MSB = field2677 */678static int tvp5150_set_vbi(struct v4l2_subdev *sd,679			unsigned int type, u8 flags, int line,680			const int fields)681{682	struct tvp5150 *decoder = to_tvp5150(sd);683	v4l2_std_id std = decoder->norm;684	u8 reg;685	int i, pos = 0;686 687	if (std == V4L2_STD_ALL) {688		dev_err(sd->dev, "VBI can't be configured without knowing number of lines\n");689		return 0;690	} else if (std & V4L2_STD_625_50) {691		/* Don't follow NTSC Line number convension */692		line += 3;693	}694 695	if (line < 6 || line > 27)696		return 0;697 698	for (i = 0; i < ARRAY_SIZE(vbi_ram_default); i++) {699		const struct i2c_vbi_ram_value *regs =  &vbi_ram_default[i];700 701		if (!regs->type.vbi_type)702			continue;703 704		if ((type & regs->type.vbi_type) &&705		    (line >= regs->type.ini_line) &&706		    (line <= regs->type.end_line))707			break;708		pos++;709	}710 711	type = pos | (flags & 0xf0);712	reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;713 714	if (fields & 1)715		regmap_write(decoder->regmap, reg, type);716 717	if (fields & 2)718		regmap_write(decoder->regmap, reg + 1, type);719 720	return type;721}722 723static int tvp5150_get_vbi(struct v4l2_subdev *sd, int line)724{725	struct tvp5150 *decoder = to_tvp5150(sd);726	v4l2_std_id std = decoder->norm;727	u8 reg;728	int pos, type = 0;729	int i, ret = 0;730 731	if (std == V4L2_STD_ALL) {732		dev_err(sd->dev, "VBI can't be configured without knowing number of lines\n");733		return 0;734	} else if (std & V4L2_STD_625_50) {735		/* Don't follow NTSC Line number convension */736		line += 3;737	}738 739	if (line < 6 || line > 27)740		return 0;741 742	reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;743 744	for (i = 0; i <= 1; i++) {745		ret = tvp5150_read(sd, reg + i);746		if (ret < 0) {747			dev_err(sd->dev, "%s: failed with error = %d\n",748				 __func__, ret);749			return 0;750		}751		pos = ret & 0x0f;752		if (pos < ARRAY_SIZE(vbi_ram_default))753			type |= vbi_ram_default[pos].type.vbi_type;754	}755 756	return type;757}758 759static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)760{761	struct tvp5150 *decoder = to_tvp5150(sd);762	int fmt = 0;763 764	/* First tests should be against specific std */765 766	if (std == V4L2_STD_NTSC_443) {767		fmt = VIDEO_STD_NTSC_4_43_BIT;768	} else if (std == V4L2_STD_PAL_M) {769		fmt = VIDEO_STD_PAL_M_BIT;770	} else if (std == V4L2_STD_PAL_N || std == V4L2_STD_PAL_Nc) {771		fmt = VIDEO_STD_PAL_COMBINATION_N_BIT;772	} else {773		/* Then, test against generic ones */774		if (std & V4L2_STD_NTSC)775			fmt = VIDEO_STD_NTSC_MJ_BIT;776		else if (std & V4L2_STD_PAL)777			fmt = VIDEO_STD_PAL_BDGHIN_BIT;778		else if (std & V4L2_STD_SECAM)779			fmt = VIDEO_STD_SECAM_BIT;780	}781 782	dev_dbg_lvl(sd->dev, 1, debug, "Set video std register to %d.\n", fmt);783	regmap_write(decoder->regmap, TVP5150_VIDEO_STD, fmt);784	return 0;785}786 787static int tvp5150_g_std(struct v4l2_subdev *sd, v4l2_std_id *std)788{789	struct tvp5150 *decoder = to_tvp5150(sd);790 791	*std = decoder->norm;792 793	return 0;794}795 796static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)797{798	struct tvp5150 *decoder = to_tvp5150(sd);799	struct tvp5150_connector *cur_con = decoder->cur_connector;800	v4l2_std_id supported_stds;801 802	if (decoder->norm == std)803		return 0;804 805	/* In case of no of-connectors are available no limitations are made */806	if (!decoder->connectors_num)807		supported_stds = V4L2_STD_ALL;808	else809		supported_stds = cur_con->base.connector.analog.sdtv_stds;810 811	/*812	 * Check if requested std or group of std's is/are supported by the813	 * connector.814	 */815	if ((supported_stds & std) == 0)816		return -EINVAL;817 818	/* Change cropping height limits */819	if (std & V4L2_STD_525_60)820		decoder->rect.height = TVP5150_V_MAX_525_60;821	else822		decoder->rect.height = TVP5150_V_MAX_OTHERS;823 824	/* Set only the specific supported std in case of group of std's. */825	decoder->norm = supported_stds & std;826 827	return tvp5150_set_std(sd, std);828}829 830static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)831{832	int val = tvp5150_read(sd, TVP5150_STATUS_REG_5);833 834	switch (val & 0x0F) {835	case 0x01:836		return V4L2_STD_NTSC;837	case 0x03:838		return V4L2_STD_PAL;839	case 0x05:840		return V4L2_STD_PAL_M;841	case 0x07:842		return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc;843	case 0x09:844		return V4L2_STD_NTSC_443;845	case 0xb:846		return V4L2_STD_SECAM;847	default:848		return V4L2_STD_UNKNOWN;849	}850}851 852static int query_lock(struct v4l2_subdev *sd)853{854	struct tvp5150 *decoder = to_tvp5150(sd);855	int status;856 857	if (decoder->irq)858		return decoder->lock;859 860	regmap_read(decoder->regmap, TVP5150_STATUS_REG_1, &status);861 862	/* For standard detection, we need the 3 locks */863	return (status & 0x0e) == 0x0e;864}865 866static int tvp5150_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)867{868	*std_id = query_lock(sd) ? tvp5150_read_std(sd) : V4L2_STD_UNKNOWN;869 870	return 0;871}872 873static const struct v4l2_event tvp5150_ev_fmt = {874	.type = V4L2_EVENT_SOURCE_CHANGE,875	.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,876};877 878static irqreturn_t tvp5150_isr(int irq, void *dev_id)879{880	struct tvp5150 *decoder = dev_id;881	struct regmap *map = decoder->regmap;882	unsigned int mask, active = 0, status = 0;883 884	mask = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE |885	       TVP5150_MISC_CTL_CLOCK_OE;886 887	regmap_read(map, TVP5150_INT_STATUS_REG_A, &status);888	if (status) {889		regmap_write(map, TVP5150_INT_STATUS_REG_A, status);890 891		if (status & TVP5150_INT_A_LOCK) {892			decoder->lock = !!(status & TVP5150_INT_A_LOCK_STATUS);893			dev_dbg_lvl(decoder->sd.dev, 1, debug,894				    "sync lo%s signal\n",895				    decoder->lock ? "ck" : "ss");896			v4l2_subdev_notify_event(&decoder->sd, &tvp5150_ev_fmt);897			regmap_update_bits(map, TVP5150_MISC_CTL, mask,898					   decoder->lock ? decoder->oe : 0);899		}900 901		return IRQ_HANDLED;902	}903 904	regmap_read(map, TVP5150_INT_ACTIVE_REG_B, &active);905	if (active) {906		status = 0;907		regmap_read(map, TVP5150_INT_STATUS_REG_B, &status);908		if (status)909			regmap_write(map, TVP5150_INT_RESET_REG_B, status);910	}911 912	return IRQ_HANDLED;913}914 915static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)916{917	struct tvp5150 *decoder = to_tvp5150(sd);918	struct regmap *map = decoder->regmap;919 920	/* Initializes TVP5150 to its default values */921	tvp5150_write_inittab(sd, tvp5150_init_default);922 923	if (decoder->irq) {924		/* Configure pins: FID, VSYNC, INTREQ, SCLK */925		regmap_write(map, TVP5150_CONF_SHARED_PIN, 0x0);926		/* Set interrupt polarity to active high */927		regmap_write(map, TVP5150_INT_CONF, TVP5150_VDPOE | 0x1);928		regmap_write(map, TVP5150_INTT_CONFIG_REG_B, 0x1);929	} else {930		/* Configure pins: FID, VSYNC, GPCL/VBLK, SCLK */931		regmap_write(map, TVP5150_CONF_SHARED_PIN, 0x2);932		/* Keep interrupt polarity active low */933		regmap_write(map, TVP5150_INT_CONF, TVP5150_VDPOE);934		regmap_write(map, TVP5150_INTT_CONFIG_REG_B, 0x0);935	}936 937	/* Initializes VDP registers */938	tvp5150_vdp_init(sd);939 940	/* Selects decoder input */941	tvp5150_selmux(sd);942 943	/* Initialize image preferences */944	v4l2_ctrl_handler_setup(&decoder->hdl);945 946	return 0;947}948 949static int tvp5150_enable(struct v4l2_subdev *sd)950{951	struct tvp5150 *decoder = to_tvp5150(sd);952	v4l2_std_id std;953 954	/* Initializes TVP5150 to stream enabled values */955	tvp5150_write_inittab(sd, tvp5150_init_enable);956 957	if (decoder->norm == V4L2_STD_ALL)958		std = tvp5150_read_std(sd);959	else960		std = decoder->norm;961 962	/* Disable autoswitch mode */963	tvp5150_set_std(sd, std);964 965	/*966	 * Enable the YCbCr and clock outputs. In discrete sync mode967	 * (non-BT.656) additionally enable the sync outputs.968	 */969	switch (decoder->mbus_type) {970	case V4L2_MBUS_PARALLEL:971		/* 8-bit 4:2:2 YUV with discrete sync output */972		regmap_update_bits(decoder->regmap, TVP5150_DATA_RATE_SEL,973				   0x7, 0x0);974		decoder->oe = TVP5150_MISC_CTL_YCBCR_OE |975			      TVP5150_MISC_CTL_CLOCK_OE |976			      TVP5150_MISC_CTL_SYNC_OE;977		break;978	case V4L2_MBUS_BT656:979		decoder->oe = TVP5150_MISC_CTL_YCBCR_OE |980			      TVP5150_MISC_CTL_CLOCK_OE;981		break;982	default:983		return -EINVAL;984	}985 986	return 0;987};988 989static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl)990{991	struct v4l2_subdev *sd = to_sd(ctrl);992	struct tvp5150 *decoder = to_tvp5150(sd);993 994	switch (ctrl->id) {995	case V4L2_CID_BRIGHTNESS:996		regmap_write(decoder->regmap, TVP5150_BRIGHT_CTL, ctrl->val);997		return 0;998	case V4L2_CID_CONTRAST:999		regmap_write(decoder->regmap, TVP5150_CONTRAST_CTL, ctrl->val);1000		return 0;1001	case V4L2_CID_SATURATION:1002		regmap_write(decoder->regmap, TVP5150_SATURATION_CTL,1003			     ctrl->val);1004		return 0;1005	case V4L2_CID_HUE:1006		regmap_write(decoder->regmap, TVP5150_HUE_CTL, ctrl->val);1007		return 0;1008	case V4L2_CID_TEST_PATTERN:1009		decoder->enable = ctrl->val ? false : true;1010		tvp5150_selmux(sd);1011		return 0;1012	}1013	return -EINVAL;1014}1015 1016static void tvp5150_set_default(v4l2_std_id std, struct v4l2_rect *crop)1017{1018	/* Default is no cropping */1019	crop->top = 0;1020	crop->left = 0;1021	crop->width = TVP5150_H_MAX;1022	if (std & V4L2_STD_525_60)1023		crop->height = TVP5150_V_MAX_525_60;1024	else1025		crop->height = TVP5150_V_MAX_OTHERS;1026}1027 1028static struct v4l2_rect *1029tvp5150_get_pad_crop(struct tvp5150 *decoder,1030		     struct v4l2_subdev_state *sd_state, unsigned int pad,1031		     enum v4l2_subdev_format_whence which)1032{1033	switch (which) {1034	case V4L2_SUBDEV_FORMAT_ACTIVE:1035		return &decoder->rect;1036	case V4L2_SUBDEV_FORMAT_TRY:1037#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)1038		return v4l2_subdev_state_get_crop(sd_state, pad);1039#else1040		return ERR_PTR(-EINVAL);1041#endif1042	default:1043		return ERR_PTR(-EINVAL);1044	}1045}1046 1047static int tvp5150_fill_fmt(struct v4l2_subdev *sd,1048			    struct v4l2_subdev_state *sd_state,1049			    struct v4l2_subdev_format *format)1050{1051	struct v4l2_mbus_framefmt *f;1052	struct tvp5150 *decoder = to_tvp5150(sd);1053 1054	if (!format || (format->pad != TVP5150_PAD_VID_OUT))1055		return -EINVAL;1056 1057	f = &format->format;1058 1059	f->width = decoder->rect.width;1060	f->height = decoder->rect.height / 2;1061 1062	f->code = TVP5150_MBUS_FMT;1063	f->field = TVP5150_FIELD;1064	f->colorspace = TVP5150_COLORSPACE;1065 1066	dev_dbg_lvl(sd->dev, 1, debug, "width = %d, height = %d\n", f->width,1067		    f->height);1068	return 0;1069}1070 1071static unsigned int tvp5150_get_hmax(struct v4l2_subdev *sd)1072{1073	struct tvp5150 *decoder = to_tvp5150(sd);1074	v4l2_std_id std;1075 1076	/* Calculate height based on current standard */1077	if (decoder->norm == V4L2_STD_ALL)1078		std = tvp5150_read_std(sd);1079	else1080		std = decoder->norm;1081 1082	return (std & V4L2_STD_525_60) ?1083		TVP5150_V_MAX_525_60 : TVP5150_V_MAX_OTHERS;1084}1085 1086static void tvp5150_set_hw_selection(struct v4l2_subdev *sd,1087				     struct v4l2_rect *rect)1088{1089	struct tvp5150 *decoder = to_tvp5150(sd);1090	unsigned int hmax = tvp5150_get_hmax(sd);1091 1092	regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect->top);1093	regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,1094		     rect->top + rect->height - hmax);1095	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,1096		     rect->left >> TVP5150_CROP_SHIFT);1097	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,1098		     rect->left | (1 << TVP5150_CROP_SHIFT));1099	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,1100		     (rect->left + rect->width - TVP5150_MAX_CROP_LEFT) >>1101		     TVP5150_CROP_SHIFT);1102	regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,1103		     rect->left + rect->width - TVP5150_MAX_CROP_LEFT);1104}1105 1106static int tvp5150_set_selection(struct v4l2_subdev *sd,1107				 struct v4l2_subdev_state *sd_state,1108				 struct v4l2_subdev_selection *sel)1109{1110	struct tvp5150 *decoder = to_tvp5150(sd);1111	struct v4l2_rect *rect = &sel->r;1112	struct v4l2_rect *crop;1113	unsigned int hmax;1114 1115	if (sel->target != V4L2_SEL_TGT_CROP)1116		return -EINVAL;1117 1118	dev_dbg_lvl(sd->dev, 1, debug, "%s left=%d, top=%d, width=%d, height=%d\n",1119		__func__, rect->left, rect->top, rect->width, rect->height);1120 1121	/* tvp5150 has some special limits */1122	rect->left = clamp(rect->left, 0, TVP5150_MAX_CROP_LEFT);1123	rect->top = clamp(rect->top, 0, TVP5150_MAX_CROP_TOP);1124	hmax = tvp5150_get_hmax(sd);1125 1126	/*1127	 * alignments:1128	 *  - width = 2 due to UYVY colorspace1129	 *  - height, image = no special alignment1130	 */1131	v4l_bound_align_image(&rect->width,1132			      TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect->left,1133			      TVP5150_H_MAX - rect->left, 1, &rect->height,1134			      hmax - TVP5150_MAX_CROP_TOP - rect->top,1135			      hmax - rect->top, 0, 0);1136 1137	if (!IS_ENABLED(CONFIG_VIDEO_V4L2_SUBDEV_API) &&1138	    sel->which == V4L2_SUBDEV_FORMAT_TRY)1139		return 0;1140 1141	crop = tvp5150_get_pad_crop(decoder, sd_state, sel->pad, sel->which);1142	if (IS_ERR(crop))1143		return PTR_ERR(crop);1144 1145	/*1146	 * Update output image size if the selection (crop) rectangle size or1147	 * position has been modified.1148	 */1149	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE &&1150	    !v4l2_rect_equal(rect, crop))1151		tvp5150_set_hw_selection(sd, rect);1152 1153	*crop = *rect;1154 1155	return 0;1156}1157 1158static int tvp5150_get_selection(struct v4l2_subdev *sd,1159				 struct v4l2_subdev_state *sd_state,1160				 struct v4l2_subdev_selection *sel)1161{1162	struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);1163	struct v4l2_rect *crop;1164	v4l2_std_id std;1165 1166	switch (sel->target) {1167	case V4L2_SEL_TGT_CROP_BOUNDS:1168		sel->r.left = 0;1169		sel->r.top = 0;1170		sel->r.width = TVP5150_H_MAX;1171 1172		/* Calculate height based on current standard */1173		if (decoder->norm == V4L2_STD_ALL)1174			std = tvp5150_read_std(sd);1175		else1176			std = decoder->norm;1177		if (std & V4L2_STD_525_60)1178			sel->r.height = TVP5150_V_MAX_525_60;1179		else1180			sel->r.height = TVP5150_V_MAX_OTHERS;1181		return 0;1182	case V4L2_SEL_TGT_CROP:1183		crop = tvp5150_get_pad_crop(decoder, sd_state, sel->pad,1184					    sel->which);1185		if (IS_ERR(crop))1186			return PTR_ERR(crop);1187		sel->r = *crop;1188		return 0;1189	default:1190		return -EINVAL;1191	}1192}1193 1194static int tvp5150_get_mbus_config(struct v4l2_subdev *sd,1195				   unsigned int pad,1196				   struct v4l2_mbus_config *cfg)1197{1198	struct tvp5150 *decoder = to_tvp5150(sd);1199 1200	cfg->type = decoder->mbus_type;1201	cfg->bus.parallel.flags = V4L2_MBUS_MASTER1202				| V4L2_MBUS_PCLK_SAMPLE_RISING1203				| V4L2_MBUS_FIELD_EVEN_LOW1204				| V4L2_MBUS_DATA_ACTIVE_HIGH;1205 1206	return 0;1207}1208 1209/****************************************************************************1210			V4L2 subdev pad ops1211 ****************************************************************************/1212static int tvp5150_init_state(struct v4l2_subdev *sd,1213			      struct v4l2_subdev_state *sd_state)1214{1215	struct tvp5150 *decoder = to_tvp5150(sd);1216	v4l2_std_id std;1217 1218	/*1219	 * Reset selection to maximum on subdev_open() if autodetection is on1220	 * and a standard change is detected.1221	 */1222	if (decoder->norm == V4L2_STD_ALL) {1223		std = tvp5150_read_std(sd);1224		if (std != decoder->detected_norm) {1225			decoder->detected_norm = std;1226			tvp5150_set_default(std, &decoder->rect);1227		}1228	}1229 1230	return 0;1231}1232 1233static int tvp5150_enum_mbus_code(struct v4l2_subdev *sd,1234		struct v4l2_subdev_state *sd_state,1235		struct v4l2_subdev_mbus_code_enum *code)1236{1237	if (code->pad || code->index)1238		return -EINVAL;1239 1240	code->code = TVP5150_MBUS_FMT;1241	return 0;1242}1243 1244static int tvp5150_enum_frame_size(struct v4l2_subdev *sd,1245				   struct v4l2_subdev_state *sd_state,1246				   struct v4l2_subdev_frame_size_enum *fse)1247{1248	struct tvp5150 *decoder = to_tvp5150(sd);1249 1250	if (fse->index >= 8 || fse->code != TVP5150_MBUS_FMT)1251		return -EINVAL;1252 1253	fse->code = TVP5150_MBUS_FMT;1254	fse->min_width = decoder->rect.width;1255	fse->max_width = decoder->rect.width;1256	fse->min_height = decoder->rect.height / 2;1257	fse->max_height = decoder->rect.height / 2;1258 1259	return 0;1260}1261 1262/****************************************************************************1263 *			Media entity ops1264 ****************************************************************************/1265#if defined(CONFIG_MEDIA_CONTROLLER)1266static int tvp5150_set_link(struct media_pad *connector_pad,1267			    struct media_pad *tvp5150_pad, u32 flags)1268{1269	struct media_link *link;1270 1271	link = media_entity_find_link(connector_pad, tvp5150_pad);1272	if (!link)1273		return -EINVAL;1274 1275	link->flags = flags;1276	link->reverse->flags = link->flags;1277 1278	return 0;1279}1280 1281static int tvp5150_disable_all_input_links(struct tvp5150 *decoder)1282{1283	struct media_pad *connector_pad;1284	unsigned int i;1285	int err;1286 1287	for (i = 0; i < TVP5150_NUM_PADS - 1; i++) {1288		connector_pad = media_pad_remote_pad_first(&decoder->pads[i]);1289		if (!connector_pad)1290			continue;1291 1292		err = tvp5150_set_link(connector_pad, &decoder->pads[i], 0);1293		if (err)1294			return err;1295	}1296 1297	return 0;1298}1299 1300static int tvp5150_s_routing(struct v4l2_subdev *sd, u32 input, u32 output,1301			     u32 config);1302 1303static int tvp5150_link_setup(struct media_entity *entity,1304			      const struct media_pad *tvp5150_pad,1305			      const struct media_pad *remote, u32 flags)1306{1307	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);1308	struct tvp5150 *decoder = to_tvp5150(sd);1309	struct media_pad *other_tvp5150_pad =1310		&decoder->pads[tvp5150_pad->index ^ 1];1311	struct v4l2_fwnode_connector *v4l2c;1312	bool is_svideo = false;1313	unsigned int i;1314	int err;1315 1316	/*1317	 * The TVP5150 state is determined by the enabled sink pad link(s).1318	 * Enabling or disabling the source pad link has no effect.1319	 */1320	if (tvp5150_pad->flags & MEDIA_PAD_FL_SOURCE)1321		return 0;1322 1323	/* Check if the svideo connector should be enabled */1324	for (i = 0; i < decoder->connectors_num; i++) {1325		if (remote->entity == &decoder->connectors[i].ent) {1326			v4l2c = &decoder->connectors[i].base;1327			is_svideo = v4l2c->type == V4L2_CONN_SVIDEO;1328			break;1329		}1330	}1331 1332	dev_dbg_lvl(sd->dev, 1, debug, "link setup '%s':%d->'%s':%d[%d]",1333		    remote->entity->name, remote->index,1334		    tvp5150_pad->entity->name, tvp5150_pad->index,1335		    flags & MEDIA_LNK_FL_ENABLED);1336	if (is_svideo)1337		dev_dbg_lvl(sd->dev, 1, debug,1338			    "link setup '%s':%d->'%s':%d[%d]",1339			    remote->entity->name, remote->index,1340			    other_tvp5150_pad->entity->name,1341			    other_tvp5150_pad->index,1342			    flags & MEDIA_LNK_FL_ENABLED);1343 1344	/*1345	 * The TVP5150 has an internal mux which allows the following setup:1346	 *1347	 * comp-connector1  --\1348	 *		       |---> AIP1A1349	 *		      /1350	 * svideo-connector -|1351	 *		      \1352	 *		       |---> AIP1B1353	 * comp-connector2  --/1354	 *1355	 * We can't rely on user space that the current connector gets disabled1356	 * first before enabling the new connector. Disable all active1357	 * connector links to be on the safe side.1358	 */1359	err = tvp5150_disable_all_input_links(decoder);1360	if (err)1361		return err;1362 1363	tvp5150_s_routing(sd, is_svideo ? TVP5150_SVIDEO : tvp5150_pad->index,1364			  flags & MEDIA_LNK_FL_ENABLED ? TVP5150_NORMAL :1365			  TVP5150_BLACK_SCREEN, 0);1366 1367	if (flags & MEDIA_LNK_FL_ENABLED) {1368		struct v4l2_fwnode_connector_analog *v4l2ca;1369		u32 new_norm;1370 1371		/*1372		 * S-Video connector is conneted to both ports AIP1A and AIP1B.1373		 * Both links must be enabled in one-shot regardless which link1374		 * the user requests.1375		 */1376		if (is_svideo) {1377			err = tvp5150_set_link((struct media_pad *)remote,1378					       other_tvp5150_pad, flags);1379			if (err)1380				return err;1381		}1382 1383		if (!decoder->connectors_num)1384			return 0;1385 1386		/* Update the current connector */1387		decoder->cur_connector =1388			container_of(remote, struct tvp5150_connector, pad);1389 1390		/*1391		 * Do nothing if the new connector supports the same tv-norms as1392		 * the old one.1393		 */1394		v4l2ca = &decoder->cur_connector->base.connector.analog;1395		new_norm = decoder->norm & v4l2ca->sdtv_stds;1396		if (decoder->norm == new_norm)1397			return 0;1398 1399		/*1400		 * Fallback to the new connector tv-norms if we can't find any1401		 * common between the current tv-norm and the new one.1402		 */1403		tvp5150_s_std(sd, new_norm ? new_norm : v4l2ca->sdtv_stds);1404	}1405 1406	return 0;1407}1408 1409static const struct media_entity_operations tvp5150_sd_media_ops = {1410	.link_setup = tvp5150_link_setup,1411};1412#endif1413/****************************************************************************1414			I2C Command1415 ****************************************************************************/1416static int __maybe_unused tvp5150_runtime_suspend(struct device *dev)1417{1418	struct v4l2_subdev *sd = dev_get_drvdata(dev);1419	struct tvp5150 *decoder = to_tvp5150(sd);1420 1421	if (decoder->irq)1422		/* Disable lock interrupt */1423		return regmap_update_bits(decoder->regmap,1424					  TVP5150_INT_ENABLE_REG_A,1425					  TVP5150_INT_A_LOCK, 0);1426	return 0;1427}1428 1429static int __maybe_unused tvp5150_runtime_resume(struct device *dev)1430{1431	struct v4l2_subdev *sd = dev_get_drvdata(dev);1432	struct tvp5150 *decoder = to_tvp5150(sd);1433 1434	if (decoder->irq)1435		/* Enable lock interrupt */1436		return regmap_update_bits(decoder->regmap,1437					  TVP5150_INT_ENABLE_REG_A,1438					  TVP5150_INT_A_LOCK,1439					  TVP5150_INT_A_LOCK);1440	return 0;1441}1442 1443static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)1444{1445	struct tvp5150 *decoder = to_tvp5150(sd);1446	unsigned int mask, val = 0;1447	int ret;1448 1449	mask = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE |1450	       TVP5150_MISC_CTL_CLOCK_OE;1451 1452	if (enable) {1453		ret = pm_runtime_resume_and_get(sd->dev);1454		if (ret < 0)1455			return ret;1456 1457		tvp5150_enable(sd);1458 1459		/* Enable outputs if decoder is locked */1460		if (decoder->irq)1461			val = decoder->lock ? decoder->oe : 0;1462		else1463			val = decoder->oe;1464 1465		v4l2_subdev_notify_event(&decoder->sd, &tvp5150_ev_fmt);1466	} else {1467		pm_runtime_put(sd->dev);1468	}1469 1470	regmap_update_bits(decoder->regmap, TVP5150_MISC_CTL, mask, val);1471 1472	return 0;1473}1474 1475static int tvp5150_s_routing(struct v4l2_subdev *sd,1476			     u32 input, u32 output, u32 config)1477{1478	struct tvp5150 *decoder = to_tvp5150(sd);1479 1480	decoder->input = input;1481	decoder->output = output;1482 1483	if (output == TVP5150_BLACK_SCREEN)1484		decoder->enable = false;1485	else1486		decoder->enable = true;1487 1488	tvp5150_selmux(sd);1489	return 0;1490}1491 1492static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)1493{1494	struct tvp5150 *decoder = to_tvp5150(sd);1495 1496	/*1497	 * this is for capturing 36 raw vbi lines1498	 * if there's a way to cut off the beginning 2 vbi lines1499	 * with the tvp5150 then the vbi line count could be lowered1500	 * to 17 lines/field again, although I couldn't find a register1501	 * which could do that cropping1502	 */1503 1504	if (fmt->sample_format == V4L2_PIX_FMT_GREY)1505		regmap_write(decoder->regmap, TVP5150_LUMA_PROC_CTL_1, 0x70);1506	if (fmt->count[0] == 18 && fmt->count[1] == 18) {1507		regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START,1508			     0x00);1509		regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP, 0x01);1510	}1511	return 0;1512}1513 1514static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)1515{1516	struct tvp5150 *decoder = to_tvp5150(sd);1517	int i;1518 1519	if (svbi->service_set != 0) {1520		for (i = 0; i <= 23; i++) {1521			svbi->service_lines[1][i] = 0;1522			svbi->service_lines[0][i] =1523				tvp5150_set_vbi(sd, svbi->service_lines[0][i],1524						0xf0, i, 3);1525		}1526		/* Enables FIFO */1527		regmap_write(decoder->regmap, TVP5150_FIFO_OUT_CTRL, 1);1528	} else {1529		/* Disables FIFO*/1530		regmap_write(decoder->regmap, TVP5150_FIFO_OUT_CTRL, 0);1531 1532		/* Disable Full Field */1533		regmap_write(decoder->regmap, TVP5150_FULL_FIELD_ENA, 0);1534 1535		/* Disable Line modes */1536		for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)1537			regmap_write(decoder->regmap, i, 0xff);1538	}1539	return 0;1540}1541 1542static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)1543{1544	int i, mask = 0;1545 1546	memset(svbi->service_lines, 0, sizeof(svbi->service_lines));1547 1548	for (i = 0; i <= 23; i++) {1549		svbi->service_lines[0][i] =1550			tvp5150_get_vbi(sd, i);1551		mask |= svbi->service_lines[0][i];1552	}1553	svbi->service_set = mask;1554	return 0;1555}1556 1557#ifdef CONFIG_VIDEO_ADV_DEBUG1558static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)1559{1560	int res;1561 1562	res = tvp5150_read(sd, reg->reg & 0xff);1563	if (res < 0) {1564		dev_err(sd->dev, "%s: failed with error = %d\n", __func__, res);1565		return res;1566	}1567 1568	reg->val = res;1569	reg->size = 1;1570	return 0;1571}1572 1573static int tvp5150_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)1574{1575	struct tvp5150 *decoder = to_tvp5150(sd);1576 1577	return regmap_write(decoder->regmap, reg->reg & 0xff, reg->val & 0xff);1578}1579#endif1580 1581static int tvp5150_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,1582				   struct v4l2_event_subscription *sub)1583{1584	switch (sub->type) {1585	case V4L2_EVENT_SOURCE_CHANGE:1586		return v4l2_src_change_event_subdev_subscribe(sd, fh, sub);1587	case V4L2_EVENT_CTRL:1588		return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub);1589	default:1590		return -EINVAL;1591	}1592}1593 1594static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)1595{1596	int status = tvp5150_read(sd, 0x88);1597 1598	vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;1599	return 0;1600}1601 1602static int tvp5150_registered(struct v4l2_subdev *sd)1603{1604#if defined(CONFIG_MEDIA_CONTROLLER)1605	struct tvp5150 *decoder = to_tvp5150(sd);1606	unsigned int i;1607	int ret;1608 1609	/*1610	 * Setup connector pads and links. Enable the link to the first1611	 * available connector per default.1612	 */1613	for (i = 0; i < decoder->connectors_num; i++) {1614		struct media_entity *con = &decoder->connectors[i].ent;1615		struct media_pad *pad = &decoder->connectors[i].pad;1616		struct v4l2_fwnode_connector *v4l2c =1617			&decoder->connectors[i].base;1618		struct v4l2_connector_link *link =1619			v4l2_connector_first_link(v4l2c);1620		unsigned int port = link->fwnode_link.remote_port;1621		unsigned int flags = i ? 0 : MEDIA_LNK_FL_ENABLED;1622		bool is_svideo = v4l2c->type == V4L2_CONN_SVIDEO;1623 1624		pad->flags = MEDIA_PAD_FL_SOURCE;1625		ret = media_entity_pads_init(con, 1, pad);1626		if (ret < 0)1627			goto err;1628 1629		ret = media_device_register_entity(sd->v4l2_dev->mdev, con);1630		if (ret < 0)1631			goto err;1632 1633		ret = media_create_pad_link(con, 0, &sd->entity, port, flags);1634		if (ret < 0)1635			goto err;1636 1637		if (is_svideo) {1638			/*1639			 * Check tvp5150_link_setup() comments for more1640			 * information.1641			 */1642			link = v4l2_connector_last_link(v4l2c);1643			port = link->fwnode_link.remote_port;1644			ret = media_create_pad_link(con, 0, &sd->entity, port,1645						    flags);1646			if (ret < 0)1647				goto err;1648		}1649 1650		/* Enable default input. */1651		if (flags == MEDIA_LNK_FL_ENABLED) {1652			decoder->input =1653				is_svideo ? TVP5150_SVIDEO :1654				port == 0 ? TVP5150_COMPOSITE0 :1655				TVP5150_COMPOSITE1;1656 1657			tvp5150_selmux(sd);1658			decoder->cur_connector = &decoder->connectors[i];1659			tvp5150_s_std(sd, v4l2c->connector.analog.sdtv_stds);1660		}1661	}1662 1663	return 0;1664 1665err:1666	for (i = 0; i < decoder->connectors_num; i++) {1667		media_device_unregister_entity(&decoder->connectors[i].ent);1668		media_entity_cleanup(&decoder->connectors[i].ent);1669	}1670	return ret;1671#endif1672 1673	return 0;1674}1675 1676static int tvp5150_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)1677{1678	return pm_runtime_resume_and_get(sd->dev);1679}1680 1681static int tvp5150_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)1682{1683	pm_runtime_put(sd->dev);1684 1685	return 0;1686}1687 1688/* ----------------------------------------------------------------------- */1689 1690static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {1691	.s_ctrl = tvp5150_s_ctrl,1692};1693 1694static const struct v4l2_subdev_core_ops tvp5150_core_ops = {1695	.log_status = tvp5150_log_status,1696	.reset = tvp5150_reset,1697#ifdef CONFIG_VIDEO_ADV_DEBUG1698	.g_register = tvp5150_g_register,1699	.s_register = tvp5150_s_register,1700#endif1701	.subscribe_event = tvp5150_subscribe_event,1702	.unsubscribe_event = v4l2_event_subdev_unsubscribe,1703};1704 1705static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {1706	.g_tuner = tvp5150_g_tuner,1707};1708 1709static const struct v4l2_subdev_video_ops tvp5150_video_ops = {1710	.s_std = tvp5150_s_std,1711	.g_std = tvp5150_g_std,1712	.querystd = tvp5150_querystd,1713	.s_stream = tvp5150_s_stream,1714	.s_routing = tvp5150_s_routing,1715};1716 1717static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {1718	.g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,1719	.g_sliced_fmt = tvp5150_g_sliced_fmt,1720	.s_sliced_fmt = tvp5150_s_sliced_fmt,1721	.s_raw_fmt = tvp5150_s_raw_fmt,1722};1723 1724static const struct v4l2_subdev_pad_ops tvp5150_pad_ops = {1725	.enum_mbus_code = tvp5150_enum_mbus_code,1726	.enum_frame_size = tvp5150_enum_frame_size,1727	.set_fmt = tvp5150_fill_fmt,1728	.get_fmt = tvp5150_fill_fmt,1729	.get_selection = tvp5150_get_selection,1730	.set_selection = tvp5150_set_selection,1731	.get_mbus_config = tvp5150_get_mbus_config,1732};1733 1734static const struct v4l2_subdev_ops tvp5150_ops = {1735	.core = &tvp5150_core_ops,1736	.tuner = &tvp5150_tuner_ops,1737	.video = &tvp5150_video_ops,1738	.vbi = &tvp5150_vbi_ops,1739	.pad = &tvp5150_pad_ops,1740};1741 1742static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = {1743	.init_state = tvp5150_init_state,1744	.registered = tvp5150_registered,1745	.open = tvp5150_open,1746	.close = tvp5150_close,1747};1748 1749/****************************************************************************1750			I2C Client & Driver1751 ****************************************************************************/1752 1753static const struct regmap_range tvp5150_readable_ranges[] = {1754	{1755		.range_min = TVP5150_VD_IN_SRC_SEL_1,1756		.range_max = TVP5150_AUTOSW_MSK,1757	}, {1758		.range_min = TVP5150_COLOR_KIL_THSH_CTL,1759		.range_max = TVP5150_CONF_SHARED_PIN,1760	}, {1761		.range_min = TVP5150_ACT_VD_CROP_ST_MSB,1762		.range_max = TVP5150_HORIZ_SYNC_START,1763	}, {1764		.range_min = TVP5150_VERT_BLANKING_START,1765		.range_max = TVP5150_INTT_CONFIG_REG_B,1766	}, {1767		.range_min = TVP5150_VIDEO_STD,1768		.range_max = TVP5150_VIDEO_STD,1769	}, {1770		.range_min = TVP5150_CB_GAIN_FACT,1771		.range_max = TVP5150_REV_SELECT,1772	}, {1773		.range_min = TVP5150_MSB_DEV_ID,1774		.range_max = TVP5150_STATUS_REG_5,1775	}, {1776		.range_min = TVP5150_CC_DATA_INI,1777		.range_max = TVP5150_TELETEXT_FIL_ENA,1778	}, {1779		.range_min = TVP5150_INT_STATUS_REG_A,1780		.range_max = TVP5150_FIFO_OUT_CTRL,1781	}, {1782		.range_min = TVP5150_FULL_FIELD_ENA,1783		.range_max = TVP5150_FULL_FIELD_MODE_REG,1784	},1785};1786 1787static bool tvp5150_volatile_reg(struct device *dev, unsigned int reg)1788{1789	switch (reg) {1790	case TVP5150_VERT_LN_COUNT_MSB:1791	case TVP5150_VERT_LN_COUNT_LSB:1792	case TVP5150_INT_STATUS_REG_A:1793	case TVP5150_INT_STATUS_REG_B:1794	case TVP5150_INT_ACTIVE_REG_B:1795	case TVP5150_STATUS_REG_1:1796	case TVP5150_STATUS_REG_2:1797	case TVP5150_STATUS_REG_3:1798	case TVP5150_STATUS_REG_4:1799	case TVP5150_STATUS_REG_5:1800	/* CC, WSS, VPS, VITC data? */1801	case TVP5150_VBI_FIFO_READ_DATA:1802	case TVP5150_VDP_STATUS_REG:1803	case TVP5150_FIFO_WORD_COUNT:1804		return true;1805	default:1806		return false;1807	}1808}1809 1810static const struct regmap_access_table tvp5150_readable_table = {1811	.yes_ranges = tvp5150_readable_ranges,1812	.n_yes_ranges = ARRAY_SIZE(tvp5150_readable_ranges),1813};1814 1815static const struct regmap_config tvp5150_config = {1816	.reg_bits = 8,1817	.val_bits = 8,1818	.max_register = 0xff,1819 1820	.cache_type = REGCACHE_MAPLE,1821 1822	.rd_table = &tvp5150_readable_table,1823	.volatile_reg = tvp5150_volatile_reg,1824};1825 1826static int tvp5150_detect_version(struct tvp5150 *core)1827{1828	struct v4l2_subdev *sd = &core->sd;1829	struct i2c_client *c = v4l2_get_subdevdata(sd);1830	u8 regs[4];1831	int res;1832 1833	/*1834	 * Read consequent registers - TVP5150_MSB_DEV_ID, TVP5150_LSB_DEV_ID,1835	 * TVP5150_ROM_MAJOR_VER, TVP5150_ROM_MINOR_VER1836	 */1837	res = regmap_bulk_read(core->regmap, TVP5150_MSB_DEV_ID, regs, 4);1838	if (res < 0) {1839		dev_err(&c->dev, "reading ID registers failed: %d\n", res);1840		return res;1841	}1842 1843	core->dev_id = (regs[0] << 8) | regs[1];1844	core->rom_ver = (regs[2] << 8) | regs[3];1845 1846	dev_info(sd->dev, "tvp%04x (%u.%u) chip found @ 0x%02x (%s)\n",1847		  core->dev_id, regs[2], regs[3], c->addr << 1,1848		  c->adapter->name);1849 1850	if (core->dev_id == 0x5150 && core->rom_ver == 0x0321) {1851		dev_info(sd->dev, "tvp5150a detected.\n");1852	} else if (core->dev_id == 0x5150 && core->rom_ver == 0x0400) {1853		dev_info(sd->dev, "tvp5150am1 detected.\n");1854 1855		/* ITU-T BT.656.4 timing */1856		regmap_write(core->regmap, TVP5150_REV_SELECT, 0);1857	} else if (core->dev_id == 0x5151 && core->rom_ver == 0x0100) {1858		dev_info(sd->dev, "tvp5151 detected.\n");1859	} else {1860		dev_info(sd->dev, "*** unknown tvp%04x chip detected.\n",1861			  core->dev_id);1862	}1863 1864	return 0;1865}1866 1867static int tvp5150_init(struct i2c_client *c)1868{1869	struct gpio_desc *pdn_gpio;1870	struct gpio_desc *reset_gpio;1871 1872	pdn_gpio = devm_gpiod_get_optional(&c->dev, "pdn", GPIOD_OUT_HIGH);1873	if (IS_ERR(pdn_gpio))1874		return PTR_ERR(pdn_gpio);1875 1876	if (pdn_gpio) {1877		gpiod_set_value_cansleep(pdn_gpio, 0);1878		/* Delay time between power supplies active and reset */1879		msleep(20);1880	}1881 1882	reset_gpio = devm_gpiod_get_optional(&c->dev, "reset", GPIOD_OUT_HIGH);1883	if (IS_ERR(reset_gpio))1884		return PTR_ERR(reset_gpio);1885 1886	if (reset_gpio) {1887		/* RESETB pulse duration */1888		ndelay(500);1889		gpiod_set_value_cansleep(reset_gpio, 0);1890		/* Delay time between end of reset to I2C active */1891		usleep_range(200, 250);1892	}1893 1894	return 0;1895}1896 1897#if defined(CONFIG_MEDIA_CONTROLLER)1898static int tvp5150_mc_init(struct tvp5150 *decoder)1899{1900	struct v4l2_subdev *sd = &decoder->sd;1901	unsigned int i;1902 1903	sd->entity.ops = &tvp5150_sd_media_ops;1904	sd->entity.function = MEDIA_ENT_F_ATV_DECODER;1905 1906	for (i = 0; i < TVP5150_NUM_PADS - 1; i++) {1907		decoder->pads[i].flags = MEDIA_PAD_FL_SINK;1908		decoder->pads[i].sig_type = PAD_SIGNAL_ANALOG;1909	}1910 1911	decoder->pads[i].flags = MEDIA_PAD_FL_SOURCE;1912	decoder->pads[i].sig_type = PAD_SIGNAL_DV;1913 1914	return media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS,1915				      decoder->pads);1916}1917 1918#else /* !defined(CONFIG_MEDIA_CONTROLLER) */1919 1920static inline int tvp5150_mc_init(struct tvp5150 *decoder)1921{1922	return 0;1923}1924#endif /* defined(CONFIG_MEDIA_CONTROLLER) */1925 1926static int tvp5150_validate_connectors(struct tvp5150 *decoder)1927{1928	struct device *dev = decoder->sd.dev;1929	struct tvp5150_connector *tvpc;1930	struct v4l2_fwnode_connector *v4l2c;1931	unsigned int i;1932 1933	if (!decoder->connectors_num) {1934		dev_err(dev, "No valid connector found\n");1935		return -ENODEV;1936	}1937 1938	for (i = 0; i < decoder->connectors_num; i++) {1939		struct v4l2_connector_link *link0 = NULL;1940		struct v4l2_connector_link *link1;1941 1942		tvpc = &decoder->connectors[i];1943		v4l2c = &tvpc->base;1944 1945		if (v4l2c->type == V4L2_CONN_COMPOSITE) {1946			if (v4l2c->nr_of_links != 1) {1947				dev_err(dev, "Composite: connector needs 1 link\n");1948				return -EINVAL;1949			}1950			link0 = v4l2_connector_first_link(v4l2c);1951			if (!link0) {1952				dev_err(dev, "Composite: invalid first link\n");1953				return -EINVAL;1954			}1955			if (link0->fwnode_link.remote_id == 1) {1956				dev_err(dev, "Composite: invalid endpoint id\n");1957				return -EINVAL;1958			}1959		}1960 1961		if (v4l2c->type == V4L2_CONN_SVIDEO) {1962			if (v4l2c->nr_of_links != 2) {1963				dev_err(dev, "SVideo: connector needs 2 links\n");1964				return -EINVAL;1965			}1966			link0 = v4l2_connector_first_link(v4l2c);1967			if (!link0) {1968				dev_err(dev, "SVideo: invalid first link\n");1969				return -EINVAL;1970			}1971			link1 = v4l2_connector_last_link(v4l2c);1972			if (link0->fwnode_link.remote_port ==1973			    link1->fwnode_link.remote_port) {1974				dev_err(dev, "SVideo: invalid link setup\n");1975				return -EINVAL;1976			}1977		}1978 1979		if (!(v4l2c->connector.analog.sdtv_stds & TVP5150_STD_MASK)) {1980			dev_err(dev, "Unsupported tv-norm on connector %s\n",1981				v4l2c->name);1982			return -EINVAL;1983		}1984	}1985 1986	return 0;1987}1988 1989static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)1990{1991	struct device *dev = decoder->sd.dev;1992	struct v4l2_fwnode_endpoint bus_cfg = {1993		.bus_type = V4L2_MBUS_UNKNOWN1994	};1995	struct device_node *ep_np;1996	struct tvp5150_connector *tvpc;1997	struct v4l2_fwnode_connector *v4l2c;1998	unsigned int flags, ep_num;1999	unsigned int i;2000	int ret;2001 2002	/* At least 1 output and 1 input */2003	ep_num = of_graph_get_endpoint_count(np);2004	if (ep_num < 2 || ep_num > 5) {2005		dev_err(dev, "At least 1 input and 1 output must be connected to the device.\n");2006		return -EINVAL;2007	}2008 2009	/* Layout if all connectors are used:2010	 *2011	 * tvp-5150 port@0 (AIP1A)2012	 *	endpoint@0 -----------> Comp0-Con  port2013	 *	endpoint@1 --------+--> Svideo-Con port2014	 * tvp-5150 port@1 (AIP1B) |2015	 *	endpoint@1 --------+2016	 *	endpoint@0 -----------> Comp1-Con  port2017	 * tvp-5150 port@22018	 *	endpoint (video bitstream output at YOUT[0-7] parallel bus)2019	 */2020	for_each_endpoint_of_node(np, ep_np) {2021		struct fwnode_handle *ep_fwnode = of_fwnode_handle(ep_np);2022		unsigned int next_connector = decoder->connectors_num;2023		struct of_endpoint ep;2024 2025		of_graph_parse_endpoint(ep_np, &ep);2026		if (ep.port > 1 || ep.id > 1) {2027			dev_dbg(dev, "Ignore connector on port@%u/ep@%u\n",2028				ep.port, ep.id);2029			continue;2030		}2031 2032		tvpc = &decoder->connectors[next_connector];2033		v4l2c = &tvpc->base;2034 2035		if (ep.port == 0 || (ep.port == 1 && ep.id == 0)) {2036			ret = v4l2_fwnode_connector_parse(ep_fwnode, v4l2c);2037			if (ret)2038				goto err_put;2039			ret = v4l2_fwnode_connector_add_link(ep_fwnode, v4l2c);2040			if (ret)2041				goto err_put;2042			decoder->connectors_num++;2043		} else {2044			/* Adding the 2nd svideo link */2045			for (i = 0; i < TVP5150_MAX_CONNECTORS; i++) {2046				tvpc = &decoder->connectors[i];2047				v4l2c = &tvpc->base;2048				if (v4l2c->type == V4L2_CONN_SVIDEO)2049					break;2050			}2051 2052			ret = v4l2_fwnode_connector_add_link(ep_fwnode, v4l2c);2053			if (ret)2054				goto err_put;2055		}2056	}2057 2058	ret = tvp5150_validate_connectors(decoder);2059	if (ret)2060		goto err_free;2061 2062	for (i = 0; i < decoder->connectors_num; i++) {2063		tvpc = &decoder->connectors[i];2064		v4l2c = &tvpc->base;2065		tvpc->ent.flags = MEDIA_ENT_FL_CONNECTOR;2066		tvpc->ent.function = v4l2c->type == V4L2_CONN_SVIDEO ?2067			MEDIA_ENT_F_CONN_SVIDEO : MEDIA_ENT_F_CONN_COMPOSITE;2068		tvpc->ent.name = devm_kasprintf(dev, GFP_KERNEL, "%s %s",2069						v4l2c->name, v4l2c->label ?2070						v4l2c->label : "");2071		if (!tvpc->ent.name) {2072			ret = -ENOMEM;2073			goto err_free;2074		}2075	}2076 2077	ep_np = of_graph_get_endpoint_by_regs(np, TVP5150_PAD_VID_OUT, 0);2078	if (!ep_np) {2079		ret = -EINVAL;2080		dev_err(dev, "Error no output endpoint available\n");2081		goto err_free;2082	}2083	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_np), &bus_cfg);2084	of_node_put(ep_np);2085	if (ret)2086		goto err_free;2087 2088	flags = bus_cfg.bus.parallel.flags;2089	if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&2090	    !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&2091	      flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&2092	      flags & V4L2_MBUS_FIELD_EVEN_LOW)) {2093		ret = -EINVAL;2094		goto err_free;2095	}2096 2097	decoder->mbus_type = bus_cfg.bus_type;2098 2099	return 0;2100 2101err_put:2102	of_node_put(ep_np);2103err_free:2104	for (i = 0; i < TVP5150_MAX_CONNECTORS; i++)2105		v4l2_fwnode_connector_free(&decoder->connectors[i].base);2106 2107	return ret;2108}2109 2110static const char * const tvp5150_test_patterns[2] = {2111	"Disabled",2112	"Black screen"2113};2114 2115static int tvp5150_probe(struct i2c_client *c)2116{2117	struct tvp5150 *core;2118	struct v4l2_subdev *sd;2119	struct device_node *np = c->dev.of_node;2120	struct regmap *map;2121	unsigned int i;2122	int res;2123 2124	/* Check if the adapter supports the needed features */2125	if (!i2c_check_functionality(c->adapter,2126	     I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))2127		return -EIO;2128 2129	res = tvp5150_init(c);2130	if (res)2131		return res;2132 2133	core = devm_kzalloc(&c->dev, sizeof(*core), GFP_KERNEL);2134	if (!core)2135		return -ENOMEM;2136 2137	map = devm_regmap_init_i2c(c, &tvp5150_config);2138	if (IS_ERR(map))2139		return PTR_ERR(map);2140 2141	core->regmap = map;2142	sd = &core->sd;2143	v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);2144	sd->internal_ops = &tvp5150_internal_ops;2145	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;2146 2147	if (IS_ENABLED(CONFIG_OF) && np) {2148		res = tvp5150_parse_dt(core, np);2149		if (res) {2150			dev_err(sd->dev, "DT parsing error: %d\n", res);2151			return res;2152		}2153	} else {2154		/* Default to BT.656 embedded sync */2155		core->mbus_type = V4L2_MBUS_BT656;2156	}2157 2158	res = tvp5150_mc_init(core);2159	if (res)2160		return res;2161 2162	res = tvp5150_detect_version(core);2163	if (res < 0)2164		return res;2165 2166	/*2167	 * Iterate over all available connectors in case they are supported and2168	 * successfully parsed. Fallback to default autodetect in case they2169	 * aren't supported.2170	 */2171	for (i = 0; i < core->connectors_num; i++) {2172		struct v4l2_fwnode_connector *v4l2c;2173 2174		v4l2c = &core->connectors[i].base;2175		core->norm |= v4l2c->connector.analog.sdtv_stds;2176	}2177 2178	if (!core->connectors_num)2179		core->norm = V4L2_STD_ALL;2180 2181	core->detected_norm = V4L2_STD_UNKNOWN;2182	core->input = TVP5150_COMPOSITE1;2183	core->enable = true;2184 2185	v4l2_ctrl_handler_init(&core->hdl, 5);2186	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,2187			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);2188	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,2189			V4L2_CID_CONTRAST, 0, 255, 1, 128);2190	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,2191			V4L2_CID_SATURATION, 0, 255, 1, 128);2192	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,2193			V4L2_CID_HUE, -128, 127, 1, 0);2194	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,2195			V4L2_CID_PIXEL_RATE, 27000000,2196			27000000, 1, 27000000);2197	v4l2_ctrl_new_std_menu_items(&core->hdl, &tvp5150_ctrl_ops,2198				     V4L2_CID_TEST_PATTERN,2199				     ARRAY_SIZE(tvp5150_test_patterns) - 1,2200				     0, 0, tvp5150_test_patterns);2201	sd->ctrl_handler = &core->hdl;2202	if (core->hdl.error) {2203		res = core->hdl.error;2204		goto err;2205	}2206 2207	tvp5150_set_default(tvp5150_read_std(sd), &core->rect);2208 2209	core->irq = c->irq;2210	tvp5150_reset(sd, 0);	/* Calls v4l2_ctrl_handler_setup() */2211	if (c->irq) {2212		res = devm_request_threaded_irq(&c->dev, c->irq, NULL,2213						tvp5150_isr, IRQF_TRIGGER_HIGH |2214						IRQF_ONESHOT, "tvp5150", core);2215		if (res)2216			goto err;2217	}2218 2219	res = v4l2_async_register_subdev(sd);2220	if (res < 0)2221		goto err;2222 2223	if (debug > 1)2224		tvp5150_log_status(sd);2225 2226	pm_runtime_set_active(&c->dev);2227	pm_runtime_enable(&c->dev);2228	pm_runtime_idle(&c->dev);2229 2230	return 0;2231 2232err:2233	v4l2_ctrl_handler_free(&core->hdl);2234	return res;2235}2236 2237static void tvp5150_remove(struct i2c_client *c)2238{2239	struct v4l2_subdev *sd = i2c_get_clientdata(c);2240	struct tvp5150 *decoder = to_tvp5150(sd);2241	unsigned int i;2242 2243	dev_dbg_lvl(sd->dev, 1, debug,2244		"tvp5150.c: removing tvp5150 adapter on address 0x%x\n",2245		c->addr << 1);2246 2247	for (i = 0; i < decoder->connectors_num; i++)2248		v4l2_fwnode_connector_free(&decoder->connectors[i].base);2249	for (i = 0; i < decoder->connectors_num; i++) {2250		media_device_unregister_entity(&decoder->connectors[i].ent);2251		media_entity_cleanup(&decoder->connectors[i].ent);2252	}2253	v4l2_async_unregister_subdev(sd);2254	v4l2_ctrl_handler_free(&decoder->hdl);2255	pm_runtime_disable(&c->dev);2256	pm_runtime_set_suspended(&c->dev);2257}2258 2259/* ----------------------------------------------------------------------- */2260 2261static const struct dev_pm_ops tvp5150_pm_ops = {2262	SET_RUNTIME_PM_OPS(tvp5150_runtime_suspend,2263			   tvp5150_runtime_resume,2264			   NULL)2265};2266 2267static const struct i2c_device_id tvp5150_id[] = {2268	{ "tvp5150" },2269	{ }2270};2271MODULE_DEVICE_TABLE(i2c, tvp5150_id);2272 2273#if IS_ENABLED(CONFIG_OF)2274static const struct of_device_id tvp5150_of_match[] = {2275	{ .compatible = "ti,tvp5150", },2276	{ /* sentinel */ },2277};2278MODULE_DEVICE_TABLE(of, tvp5150_of_match);2279#endif2280 2281static struct i2c_driver tvp5150_driver = {2282	.driver = {2283		.of_match_table = of_match_ptr(tvp5150_of_match),2284		.name	= "tvp5150",2285		.pm	= &tvp5150_pm_ops,2286	},2287	.probe		= tvp5150_probe,2288	.remove		= tvp5150_remove,2289	.id_table	= tvp5150_id,2290};2291 2292module_i2c_driver(tvp5150_driver);2293