brintos

brintos / linux-shallow public Read only

0
0
Text · 76.7 KiB · 3d01cdc Raw
2742 lines · c
1// SPDX-License-Identifier: GPL-2.0-or-later2/*3 *  Driver for the Conexant CX23885 PCIe bridge4 *5 *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>6 */7 8#include "cx23885.h"9 10#include <linux/module.h>11#include <linux/init.h>12#include <linux/device.h>13#include <linux/fs.h>14#include <linux/kthread.h>15#include <linux/file.h>16#include <linux/suspend.h>17 18#include <media/v4l2-common.h>19 20#include <media/dvb_ca_en50221.h>21#include "s5h1409.h"22#include "s5h1411.h"23#include "mt2131.h"24#include "tda8290.h"25#include "tda18271.h"26#include "lgdt330x.h"27#include "xc4000.h"28#include "xc5000.h"29#include "max2165.h"30#include "tda10048.h"31#include "xc2028.h"32#include "tuner-simple.h"33#include "dib7000p.h"34#include "dib0070.h"35#include "dibx000_common.h"36#include "zl10353.h"37#include "stv0900.h"38#include "stv0900_reg.h"39#include "stv6110.h"40#include "lnbh24.h"41#include "cx24116.h"42#include "cx24117.h"43#include "cimax2.h"44#include "lgs8gxx.h"45#include "netup-eeprom.h"46#include "netup-init.h"47#include "lgdt3305.h"48#include "atbm8830.h"49#include "ts2020.h"50#include "ds3000.h"51#include "cx23885-f300.h"52#include "altera-ci.h"53#include "stv0367.h"54#include "drxk.h"55#include "mt2063.h"56#include "stv090x.h"57#include "stb6100.h"58#include "stb6100_cfg.h"59#include "tda10071.h"60#include "a8293.h"61#include "mb86a20s.h"62#include "si2165.h"63#include "si2168.h"64#include "si2157.h"65#include "sp2.h"66#include "m88ds3103.h"67#include "m88rs6000t.h"68#include "lgdt3306a.h"69 70static unsigned int debug;71 72#define dprintk(level, fmt, arg...)\73	do { if (debug >= level)\74		printk(KERN_DEBUG pr_fmt("%s dvb: " fmt), \75			__func__, ##arg); \76	} while (0)77 78/* ------------------------------------------------------------------ */79 80static unsigned int alt_tuner;81module_param(alt_tuner, int, 0644);82MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration");83 84DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);85 86/* ------------------------------------------------------------------ */87 88static int queue_setup(struct vb2_queue *q,89			   unsigned int *num_buffers, unsigned int *num_planes,90			   unsigned int sizes[], struct device *alloc_devs[])91{92	struct cx23885_tsport *port = q->drv_priv;93 94	port->ts_packet_size  = 188 * 4;95	port->ts_packet_count = 32;96	*num_planes = 1;97	sizes[0] = port->ts_packet_size * port->ts_packet_count;98	*num_buffers = 32;99	return 0;100}101 102 103static int buffer_prepare(struct vb2_buffer *vb)104{105	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);106	struct cx23885_tsport *port = vb->vb2_queue->drv_priv;107	struct cx23885_buffer *buf =108		container_of(vbuf, struct cx23885_buffer, vb);109 110	return cx23885_buf_prepare(buf, port);111}112 113static void buffer_finish(struct vb2_buffer *vb)114{115	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);116	struct cx23885_tsport *port = vb->vb2_queue->drv_priv;117	struct cx23885_dev *dev = port->dev;118	struct cx23885_buffer *buf = container_of(vbuf,119		struct cx23885_buffer, vb);120 121	cx23885_free_buffer(dev, buf);122}123 124static void buffer_queue(struct vb2_buffer *vb)125{126	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);127	struct cx23885_tsport *port = vb->vb2_queue->drv_priv;128	struct cx23885_buffer   *buf = container_of(vbuf,129		struct cx23885_buffer, vb);130 131	cx23885_buf_queue(port, buf);132}133 134static void cx23885_dvb_gate_ctrl(struct cx23885_tsport  *port, int open)135{136	struct vb2_dvb_frontends *f;137	struct vb2_dvb_frontend *fe;138 139	f = &port->frontends;140 141	if (f->gate <= 1) /* undefined or fe0 */142		fe = vb2_dvb_get_frontend(f, 1);143	else144		fe = vb2_dvb_get_frontend(f, f->gate);145 146	if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl)147		fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open);148}149 150static int cx23885_start_streaming(struct vb2_queue *q, unsigned int count)151{152	struct cx23885_tsport *port = q->drv_priv;153	struct cx23885_dmaqueue *dmaq = &port->mpegq;154	struct cx23885_buffer *buf = list_entry(dmaq->active.next,155			struct cx23885_buffer, queue);156 157	cx23885_start_dma(port, dmaq, buf);158	return 0;159}160 161static void cx23885_stop_streaming(struct vb2_queue *q)162{163	struct cx23885_tsport *port = q->drv_priv;164 165	cx23885_cancel_buffers(port);166}167 168static const struct vb2_ops dvb_qops = {169	.queue_setup    = queue_setup,170	.buf_prepare  = buffer_prepare,171	.buf_finish = buffer_finish,172	.buf_queue    = buffer_queue,173	.wait_prepare = vb2_ops_wait_prepare,174	.wait_finish = vb2_ops_wait_finish,175	.start_streaming = cx23885_start_streaming,176	.stop_streaming = cx23885_stop_streaming,177};178 179static struct s5h1409_config hauppauge_generic_config = {180	.demod_address = 0x32 >> 1,181	.output_mode   = S5H1409_SERIAL_OUTPUT,182	.gpio          = S5H1409_GPIO_ON,183	.qam_if        = 44000,184	.inversion     = S5H1409_INVERSION_OFF,185	.status_mode   = S5H1409_DEMODLOCKING,186	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,187};188 189static struct tda10048_config hauppauge_hvr1200_config = {190	.demod_address    = 0x10 >> 1,191	.output_mode      = TDA10048_SERIAL_OUTPUT,192	.fwbulkwritelen   = TDA10048_BULKWRITE_200,193	.inversion        = TDA10048_INVERSION_ON,194	.dtv6_if_freq_khz = TDA10048_IF_3300,195	.dtv7_if_freq_khz = TDA10048_IF_3800,196	.dtv8_if_freq_khz = TDA10048_IF_4300,197	.clk_freq_khz     = TDA10048_CLK_16000,198};199 200static struct tda10048_config hauppauge_hvr1210_config = {201	.demod_address    = 0x10 >> 1,202	.output_mode      = TDA10048_SERIAL_OUTPUT,203	.fwbulkwritelen   = TDA10048_BULKWRITE_200,204	.inversion        = TDA10048_INVERSION_ON,205	.dtv6_if_freq_khz = TDA10048_IF_3300,206	.dtv7_if_freq_khz = TDA10048_IF_3500,207	.dtv8_if_freq_khz = TDA10048_IF_4000,208	.clk_freq_khz     = TDA10048_CLK_16000,209};210 211static struct s5h1409_config hauppauge_ezqam_config = {212	.demod_address = 0x32 >> 1,213	.output_mode   = S5H1409_SERIAL_OUTPUT,214	.gpio          = S5H1409_GPIO_OFF,215	.qam_if        = 4000,216	.inversion     = S5H1409_INVERSION_ON,217	.status_mode   = S5H1409_DEMODLOCKING,218	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,219};220 221static struct s5h1409_config hauppauge_hvr1800lp_config = {222	.demod_address = 0x32 >> 1,223	.output_mode   = S5H1409_SERIAL_OUTPUT,224	.gpio          = S5H1409_GPIO_OFF,225	.qam_if        = 44000,226	.inversion     = S5H1409_INVERSION_OFF,227	.status_mode   = S5H1409_DEMODLOCKING,228	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,229};230 231static struct s5h1409_config hauppauge_hvr1500_config = {232	.demod_address = 0x32 >> 1,233	.output_mode   = S5H1409_SERIAL_OUTPUT,234	.gpio          = S5H1409_GPIO_OFF,235	.inversion     = S5H1409_INVERSION_OFF,236	.status_mode   = S5H1409_DEMODLOCKING,237	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,238};239 240static struct mt2131_config hauppauge_generic_tunerconfig = {241	0x61242};243 244static struct lgdt330x_config fusionhdtv_5_express = {245	.demod_chip = LGDT3303,246	.serial_mpeg = 0x40,247};248 249static struct s5h1409_config hauppauge_hvr1500q_config = {250	.demod_address = 0x32 >> 1,251	.output_mode   = S5H1409_SERIAL_OUTPUT,252	.gpio          = S5H1409_GPIO_ON,253	.qam_if        = 44000,254	.inversion     = S5H1409_INVERSION_OFF,255	.status_mode   = S5H1409_DEMODLOCKING,256	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,257};258 259static struct s5h1409_config dvico_s5h1409_config = {260	.demod_address = 0x32 >> 1,261	.output_mode   = S5H1409_SERIAL_OUTPUT,262	.gpio          = S5H1409_GPIO_ON,263	.qam_if        = 44000,264	.inversion     = S5H1409_INVERSION_OFF,265	.status_mode   = S5H1409_DEMODLOCKING,266	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,267};268 269static struct s5h1411_config dvico_s5h1411_config = {270	.output_mode   = S5H1411_SERIAL_OUTPUT,271	.gpio          = S5H1411_GPIO_ON,272	.qam_if        = S5H1411_IF_44000,273	.vsb_if        = S5H1411_IF_44000,274	.inversion     = S5H1411_INVERSION_OFF,275	.status_mode   = S5H1411_DEMODLOCKING,276	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,277};278 279static struct s5h1411_config hcw_s5h1411_config = {280	.output_mode   = S5H1411_SERIAL_OUTPUT,281	.gpio          = S5H1411_GPIO_OFF,282	.vsb_if        = S5H1411_IF_44000,283	.qam_if        = S5H1411_IF_4000,284	.inversion     = S5H1411_INVERSION_ON,285	.status_mode   = S5H1411_DEMODLOCKING,286	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,287};288 289static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {290	.i2c_address      = 0x61,291	.if_khz           = 5380,292};293 294static struct xc5000_config dvico_xc5000_tunerconfig = {295	.i2c_address      = 0x64,296	.if_khz           = 5380,297};298 299static struct tda829x_config tda829x_no_probe = {300	.probe_tuner = TDA829X_DONT_PROBE,301};302 303static struct tda18271_std_map hauppauge_tda18271_std_map = {304	.atsc_6   = { .if_freq = 5380, .agc_mode = 3, .std = 3,305		      .if_lvl = 6, .rfagc_top = 0x37 },306	.qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 0,307		      .if_lvl = 6, .rfagc_top = 0x37 },308};309 310static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {311	.dvbt_6   = { .if_freq = 3300, .agc_mode = 3, .std = 4,312		      .if_lvl = 1, .rfagc_top = 0x37, },313	.dvbt_7   = { .if_freq = 3800, .agc_mode = 3, .std = 5,314		      .if_lvl = 1, .rfagc_top = 0x37, },315	.dvbt_8   = { .if_freq = 4300, .agc_mode = 3, .std = 6,316		      .if_lvl = 1, .rfagc_top = 0x37, },317};318 319static struct tda18271_config hauppauge_tda18271_config = {320	.std_map = &hauppauge_tda18271_std_map,321	.gate    = TDA18271_GATE_ANALOG,322	.output_opt = TDA18271_OUTPUT_LT_OFF,323};324 325static struct tda18271_config hauppauge_hvr1200_tuner_config = {326	.std_map = &hauppauge_hvr1200_tda18271_std_map,327	.gate    = TDA18271_GATE_ANALOG,328	.output_opt = TDA18271_OUTPUT_LT_OFF,329};330 331static struct tda18271_config hauppauge_hvr1210_tuner_config = {332	.gate    = TDA18271_GATE_DIGITAL,333	.output_opt = TDA18271_OUTPUT_LT_OFF,334};335 336static struct tda18271_config hauppauge_hvr4400_tuner_config = {337	.gate    = TDA18271_GATE_DIGITAL,338	.output_opt = TDA18271_OUTPUT_LT_OFF,339};340 341static struct tda18271_std_map hauppauge_hvr127x_std_map = {342	.atsc_6   = { .if_freq = 3250, .agc_mode = 3, .std = 4,343		      .if_lvl = 1, .rfagc_top = 0x58 },344	.qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 5,345		      .if_lvl = 1, .rfagc_top = 0x58 },346};347 348static struct tda18271_config hauppauge_hvr127x_config = {349	.std_map = &hauppauge_hvr127x_std_map,350	.output_opt = TDA18271_OUTPUT_LT_OFF,351};352 353static struct lgdt3305_config hauppauge_lgdt3305_config = {354	.i2c_addr           = 0x0e,355	.mpeg_mode          = LGDT3305_MPEG_SERIAL,356	.tpclk_edge         = LGDT3305_TPCLK_FALLING_EDGE,357	.tpvalid_polarity   = LGDT3305_TP_VALID_HIGH,358	.deny_i2c_rptr      = 1,359	.spectral_inversion = 1,360	.qam_if_khz         = 4000,361	.vsb_if_khz         = 3250,362};363 364static struct dibx000_agc_config xc3028_agc_config = {365	BAND_VHF | BAND_UHF,	/* band_caps */366 367	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,368	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,369	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0,370	 * P_agc_nb_est=2, P_agc_write=0371	 */372	(0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |373		(3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */374 375	712,	/* inv_gain */376	21,	/* time_stabiliz */377 378	0,	/* alpha_level */379	118,	/* thlock */380 381	0,	/* wbd_inv */382	2867,	/* wbd_ref */383	0,	/* wbd_sel */384	2,	/* wbd_alpha */385 386	0,	/* agc1_max */387	0,	/* agc1_min */388	39718,	/* agc2_max */389	9930,	/* agc2_min */390	0,	/* agc1_pt1 */391	0,	/* agc1_pt2 */392	0,	/* agc1_pt3 */393	0,	/* agc1_slope1 */394	0,	/* agc1_slope2 */395	0,	/* agc2_pt1 */396	128,	/* agc2_pt2 */397	29,	/* agc2_slope1 */398	29,	/* agc2_slope2 */399 400	17,	/* alpha_mant */401	27,	/* alpha_exp */402	23,	/* beta_mant */403	51,	/* beta_exp */404 405	1,	/* perform_agc_softsplit */406};407 408/* PLL Configuration for COFDM BW_MHz = 8.000000409 * With external clock = 30.000000 */410static struct dibx000_bandwidth_config xc3028_bw_config = {411	60000,	/* internal */412	30000,	/* sampling */413	1,	/* pll_cfg: prediv */414	8,	/* pll_cfg: ratio */415	3,	/* pll_cfg: range */416	1,	/* pll_cfg: reset */417	0,	/* pll_cfg: bypass */418	0,	/* misc: refdiv */419	0,	/* misc: bypclk_div */420	1,	/* misc: IO_CLK_en_core */421	1,	/* misc: ADClkSrc */422	0,	/* misc: modulo */423	(3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */424	(1 << 25) | 5816102, /* ifreq = 5.200000 MHz */425	20452225, /* timf */426	30000000  /* xtal_hz */427};428 429static struct dib7000p_config hauppauge_hvr1400_dib7000_config = {430	.output_mpeg2_in_188_bytes = 1,431	.hostbus_diversity = 1,432	.tuner_is_baseband = 0,433	.update_lna  = NULL,434 435	.agc_config_count = 1,436	.agc = &xc3028_agc_config,437	.bw  = &xc3028_bw_config,438 439	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,440	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,441	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,442 443	.pwm_freq_div = 0,444	.agc_control  = NULL,445	.spur_protect = 0,446 447	.output_mode = OUTMODE_MPEG2_SERIAL,448};449 450static struct zl10353_config dvico_fusionhdtv_xc3028 = {451	.demod_address = 0x0f,452	.if2           = 45600,453	.no_tuner      = 1,454	.disable_i2c_gate_ctrl = 1,455};456 457static struct stv0900_reg stv0900_ts_regs[] = {458	{ R0900_TSGENERAL, 0x00 },459	{ R0900_P1_TSSPEED, 0x40 },460	{ R0900_P2_TSSPEED, 0x40 },461	{ R0900_P1_TSCFGM, 0xc0 },462	{ R0900_P2_TSCFGM, 0xc0 },463	{ R0900_P1_TSCFGH, 0xe0 },464	{ R0900_P2_TSCFGH, 0xe0 },465	{ R0900_P1_TSCFGL, 0x20 },466	{ R0900_P2_TSCFGL, 0x20 },467	{ 0xffff, 0xff }, /* terminate */468};469 470static struct stv0900_config netup_stv0900_config = {471	.demod_address = 0x68,472	.demod_mode = 1, /* dual */473	.xtal = 8000000,474	.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */475	.diseqc_mode = 2,/* 2/3 PWM */476	.ts_config_regs = stv0900_ts_regs,477	.tun1_maddress = 0,/* 0x60 */478	.tun2_maddress = 3,/* 0x63 */479	.tun1_adc = 1,/* 1 Vpp */480	.tun2_adc = 1,/* 1 Vpp */481};482 483static struct stv6110_config netup_stv6110_tunerconfig_a = {484	.i2c_address = 0x60,485	.mclk = 16000000,486	.clk_div = 1,487	.gain = 8, /* +16 dB  - maximum gain */488};489 490static struct stv6110_config netup_stv6110_tunerconfig_b = {491	.i2c_address = 0x63,492	.mclk = 16000000,493	.clk_div = 1,494	.gain = 8, /* +16 dB  - maximum gain */495};496 497static struct cx24116_config tbs_cx24116_config = {498	.demod_address = 0x55,499};500 501static struct cx24117_config tbs_cx24117_config = {502	.demod_address = 0x55,503};504 505static struct ds3000_config tevii_ds3000_config = {506	.demod_address = 0x68,507};508 509static struct ts2020_config tevii_ts2020_config  = {510	.tuner_address = 0x60,511	.clk_out_div = 1,512	.frequency_div = 1146000,513};514 515static struct cx24116_config dvbworld_cx24116_config = {516	.demod_address = 0x05,517};518 519static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {520	.prod = LGS8GXX_PROD_LGS8GL5,521	.demod_address = 0x19,522	.serial_ts = 0,523	.ts_clk_pol = 1,524	.ts_clk_gated = 1,525	.if_clk_freq = 30400, /* 30.4 MHz */526	.if_freq = 5380, /* 5.38 MHz */527	.if_neg_center = 1,528	.ext_adc = 0,529	.adc_signed = 0,530	.if_neg_edge = 0,531};532 533static struct xc5000_config mygica_x8506_xc5000_config = {534	.i2c_address = 0x61,535	.if_khz = 5380,536};537 538static struct mb86a20s_config mygica_x8507_mb86a20s_config = {539	.demod_address = 0x10,540};541 542static struct xc5000_config mygica_x8507_xc5000_config = {543	.i2c_address = 0x61,544	.if_khz = 4000,545};546 547static struct stv090x_config prof_8000_stv090x_config = {548	.device                 = STV0903,549	.demod_mode             = STV090x_SINGLE,550	.clk_mode               = STV090x_CLK_EXT,551	.xtal                   = 27000000,552	.address                = 0x6A,553	.ts1_mode               = STV090x_TSMODE_PARALLEL_PUNCTURED,554	.repeater_level         = STV090x_RPTLEVEL_64,555	.adc1_range             = STV090x_ADC_2Vpp,556	.diseqc_envelope_mode   = false,557 558	.tuner_get_frequency    = stb6100_get_frequency,559	.tuner_set_frequency    = stb6100_set_frequency,560	.tuner_set_bandwidth    = stb6100_set_bandwidth,561	.tuner_get_bandwidth    = stb6100_get_bandwidth,562};563 564static struct stb6100_config prof_8000_stb6100_config = {565	.tuner_address = 0x60,566	.refclock = 27000000,567};568 569static struct lgdt3306a_config hauppauge_quadHD_ATSC_a_config = {570	.i2c_addr               = 0x59,571	.qam_if_khz             = 4000,572	.vsb_if_khz             = 3250,573	.deny_i2c_rptr          = 1, /* Disabled */574	.spectral_inversion     = 0, /* Disabled */575	.mpeg_mode              = LGDT3306A_MPEG_SERIAL,576	.tpclk_edge             = LGDT3306A_TPCLK_RISING_EDGE,577	.tpvalid_polarity       = LGDT3306A_TP_VALID_HIGH,578	.xtalMHz                = 25, /* 24 or 25 */579};580 581static struct lgdt3306a_config hauppauge_quadHD_ATSC_b_config = {582	.i2c_addr               = 0x0e,583	.qam_if_khz             = 4000,584	.vsb_if_khz             = 3250,585	.deny_i2c_rptr          = 1, /* Disabled */586	.spectral_inversion     = 0, /* Disabled */587	.mpeg_mode              = LGDT3306A_MPEG_SERIAL,588	.tpclk_edge             = LGDT3306A_TPCLK_RISING_EDGE,589	.tpvalid_polarity       = LGDT3306A_TP_VALID_HIGH,590	.xtalMHz                = 25, /* 24 or 25 */591};592 593static int p8000_set_voltage(struct dvb_frontend *fe,594			     enum fe_sec_voltage voltage)595{596	struct cx23885_tsport *port = fe->dvb->priv;597	struct cx23885_dev *dev = port->dev;598 599	if (voltage == SEC_VOLTAGE_18)600		cx_write(MC417_RWD, 0x00001e00);601	else if (voltage == SEC_VOLTAGE_13)602		cx_write(MC417_RWD, 0x00001a00);603	else604		cx_write(MC417_RWD, 0x00001800);605	return 0;606}607 608static int dvbsky_t9580_set_voltage(struct dvb_frontend *fe,609					enum fe_sec_voltage voltage)610{611	struct cx23885_tsport *port = fe->dvb->priv;612	struct cx23885_dev *dev = port->dev;613 614	cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1);615 616	switch (voltage) {617	case SEC_VOLTAGE_13:618		cx23885_gpio_set(dev, GPIO_1);619		cx23885_gpio_clear(dev, GPIO_0);620		break;621	case SEC_VOLTAGE_18:622		cx23885_gpio_set(dev, GPIO_1);623		cx23885_gpio_set(dev, GPIO_0);624		break;625	case SEC_VOLTAGE_OFF:626		cx23885_gpio_clear(dev, GPIO_1);627		cx23885_gpio_clear(dev, GPIO_0);628		break;629	}630 631	/* call the frontend set_voltage function */632	port->fe_set_voltage(fe, voltage);633 634	return 0;635}636 637static int dvbsky_s952_portc_set_voltage(struct dvb_frontend *fe,638					enum fe_sec_voltage voltage)639{640	struct cx23885_tsport *port = fe->dvb->priv;641	struct cx23885_dev *dev = port->dev;642 643	cx23885_gpio_enable(dev, GPIO_12 | GPIO_13, 1);644 645	switch (voltage) {646	case SEC_VOLTAGE_13:647		cx23885_gpio_set(dev, GPIO_13);648		cx23885_gpio_clear(dev, GPIO_12);649		break;650	case SEC_VOLTAGE_18:651		cx23885_gpio_set(dev, GPIO_13);652		cx23885_gpio_set(dev, GPIO_12);653		break;654	case SEC_VOLTAGE_OFF:655		cx23885_gpio_clear(dev, GPIO_13);656		cx23885_gpio_clear(dev, GPIO_12);657		break;658	}659	/* call the frontend set_voltage function */660	return port->fe_set_voltage(fe, voltage);661}662 663static int cx23885_sp2_ci_ctrl(void *priv, u8 read, int addr,664				u8 data, int *mem)665{666	/* MC417 */667	#define SP2_DATA              0x000000ff668	#define SP2_WR                0x00008000669	#define SP2_RD                0x00004000670	#define SP2_ACK               0x00001000671	#define SP2_ADHI              0x00000800672	#define SP2_ADLO              0x00000400673	#define SP2_CS1               0x00000200674	#define SP2_CS0               0x00000100675	#define SP2_EN_ALL            0x00001000676	#define SP2_CTRL_OFF          (SP2_CS1 | SP2_CS0 | SP2_WR | SP2_RD)677 678	struct cx23885_tsport *port = priv;679	struct cx23885_dev *dev = port->dev;680	int ret;681	int tmp = 0;682	unsigned long timeout;683 684	mutex_lock(&dev->gpio_lock);685 686	/* write addr */687	cx_write(MC417_OEN, SP2_EN_ALL);688	cx_write(MC417_RWD, SP2_CTRL_OFF |689				SP2_ADLO | (0xff & addr));690	cx_clear(MC417_RWD, SP2_ADLO);691	cx_write(MC417_RWD, SP2_CTRL_OFF |692				SP2_ADHI | (0xff & (addr >> 8)));693	cx_clear(MC417_RWD, SP2_ADHI);694 695	if (read)696		/* data in */697		cx_write(MC417_OEN, SP2_EN_ALL | SP2_DATA);698	else699		/* data out */700		cx_write(MC417_RWD, SP2_CTRL_OFF | data);701 702	/* chip select 0 */703	cx_clear(MC417_RWD, SP2_CS0);704 705	/* read/write */706	cx_clear(MC417_RWD, (read) ? SP2_RD : SP2_WR);707 708	/* wait for a maximum of 1 msec */709	timeout = jiffies + msecs_to_jiffies(1);710	while (!time_after(jiffies, timeout)) {711		tmp = cx_read(MC417_RWD);712		if ((tmp & SP2_ACK) == 0)713			break;714		usleep_range(50, 100);715	}716 717	cx_set(MC417_RWD, SP2_CTRL_OFF);718	*mem = tmp & 0xff;719 720	mutex_unlock(&dev->gpio_lock);721 722	if (!read) {723		if (*mem < 0) {724			ret = -EREMOTEIO;725			goto err;726		}727	}728 729	return 0;730err:731	return ret;732}733 734static int cx23885_dvb_set_frontend(struct dvb_frontend *fe)735{736	struct dtv_frontend_properties *p = &fe->dtv_property_cache;737	struct cx23885_tsport *port = fe->dvb->priv;738	struct cx23885_dev *dev = port->dev;739 740	switch (dev->board) {741	case CX23885_BOARD_HAUPPAUGE_HVR1275:742		switch (p->modulation) {743		case VSB_8:744			cx23885_gpio_clear(dev, GPIO_5);745			break;746		case QAM_64:747		case QAM_256:748		default:749			cx23885_gpio_set(dev, GPIO_5);750			break;751		}752		break;753	case CX23885_BOARD_MYGICA_X8506:754	case CX23885_BOARD_MYGICA_X8507:755	case CX23885_BOARD_MAGICPRO_PROHDTVE2:756		/* Select Digital TV */757		cx23885_gpio_set(dev, GPIO_0);758		break;759	}760 761	/* Call the real set_frontend */762	if (port->set_frontend)763		return port->set_frontend(fe);764 765	return 0;766}767 768static void cx23885_set_frontend_hook(struct cx23885_tsport *port,769				     struct dvb_frontend *fe)770{771	port->set_frontend = fe->ops.set_frontend;772	fe->ops.set_frontend = cx23885_dvb_set_frontend;773}774 775static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {776	.prod = LGS8GXX_PROD_LGS8G75,777	.demod_address = 0x19,778	.serial_ts = 0,779	.ts_clk_pol = 1,780	.ts_clk_gated = 1,781	.if_clk_freq = 30400, /* 30.4 MHz */782	.if_freq = 6500, /* 6.50 MHz */783	.if_neg_center = 1,784	.ext_adc = 0,785	.adc_signed = 1,786	.adc_vpp = 2, /* 1.6 Vpp */787	.if_neg_edge = 1,788};789 790static struct xc5000_config magicpro_prohdtve2_xc5000_config = {791	.i2c_address = 0x61,792	.if_khz = 6500,793};794 795static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = {796	.prod = ATBM8830_PROD_8830,797	.demod_address = 0x44,798	.serial_ts = 0,799	.ts_sampling_edge = 1,800	.ts_clk_gated = 0,801	.osc_clk_freq = 30400, /* in kHz */802	.if_freq = 0, /* zero IF */803	.zif_swap_iq = 1,804	.agc_min = 0x2E,805	.agc_max = 0xFF,806	.agc_hold_loop = 0,807};808 809static struct max2165_config mygic_x8558pro_max2165_cfg1 = {810	.i2c_address = 0x60,811	.osc_clk = 20812};813 814static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = {815	.prod = ATBM8830_PROD_8830,816	.demod_address = 0x44,817	.serial_ts = 1,818	.ts_sampling_edge = 1,819	.ts_clk_gated = 0,820	.osc_clk_freq = 30400, /* in kHz */821	.if_freq = 0, /* zero IF */822	.zif_swap_iq = 1,823	.agc_min = 0x2E,824	.agc_max = 0xFF,825	.agc_hold_loop = 0,826};827 828static struct max2165_config mygic_x8558pro_max2165_cfg2 = {829	.i2c_address = 0x60,830	.osc_clk = 20831};832static struct stv0367_config netup_stv0367_config[] = {833	{834		.demod_address = 0x1c,835		.xtal = 27000000,836		.if_khz = 4500,837		.if_iq_mode = 0,838		.ts_mode = 1,839		.clk_pol = 0,840	}, {841		.demod_address = 0x1d,842		.xtal = 27000000,843		.if_khz = 4500,844		.if_iq_mode = 0,845		.ts_mode = 1,846		.clk_pol = 0,847	},848};849 850static struct xc5000_config netup_xc5000_config[] = {851	{852		.i2c_address = 0x61,853		.if_khz = 4500,854	}, {855		.i2c_address = 0x64,856		.if_khz = 4500,857	},858};859 860static struct drxk_config terratec_drxk_config[] = {861	{862		.adr = 0x29,863		.no_i2c_bridge = 1,864	}, {865		.adr = 0x2a,866		.no_i2c_bridge = 1,867	},868};869 870static struct mt2063_config terratec_mt2063_config[] = {871	{872		.tuner_address = 0x60,873	}, {874		.tuner_address = 0x67,875	},876};877 878static const struct tda10071_platform_data hauppauge_tda10071_pdata = {879	.clk = 40444000, /* 40.444 MHz */880	.i2c_wr_max = 64,881	.ts_mode = TDA10071_TS_SERIAL,882	.pll_multiplier = 20,883	.tuner_i2c_addr = 0x54,884};885 886static const struct m88ds3103_config dvbsky_t9580_m88ds3103_config = {887	.i2c_addr = 0x68,888	.clock = 27000000,889	.i2c_wr_max = 33,890	.clock_out = 0,891	.ts_mode = M88DS3103_TS_PARALLEL,892	.ts_clk = 16000,893	.ts_clk_pol = 1,894	.lnb_en_pol = 1,895	.lnb_hv_pol = 0,896	.agc = 0x99,897};898 899static const struct m88ds3103_config dvbsky_s950c_m88ds3103_config = {900	.i2c_addr = 0x68,901	.clock = 27000000,902	.i2c_wr_max = 33,903	.clock_out = 0,904	.ts_mode = M88DS3103_TS_CI,905	.ts_clk = 10000,906	.ts_clk_pol = 1,907	.lnb_en_pol = 1,908	.lnb_hv_pol = 0,909	.agc = 0x99,910};911 912static const struct m88ds3103_config hauppauge_hvr5525_m88ds3103_config = {913	.i2c_addr = 0x69,914	.clock = 27000000,915	.i2c_wr_max = 33,916	.ts_mode = M88DS3103_TS_PARALLEL,917	.ts_clk = 16000,918	.ts_clk_pol = 1,919	.agc = 0x99,920};921 922static struct lgdt3306a_config hauppauge_hvr1265k4_config = {923	.i2c_addr               = 0x59,924	.qam_if_khz             = 4000,925	.vsb_if_khz             = 3250,926	.deny_i2c_rptr          = 1, /* Disabled */927	.spectral_inversion     = 0, /* Disabled */928	.mpeg_mode              = LGDT3306A_MPEG_SERIAL,929	.tpclk_edge             = LGDT3306A_TPCLK_RISING_EDGE,930	.tpvalid_polarity       = LGDT3306A_TP_VALID_HIGH,931	.xtalMHz                = 25, /* 24 or 25 */932};933 934static int netup_altera_fpga_rw(void *device, int flag, int data, int read)935{936	struct cx23885_dev *dev = (struct cx23885_dev *)device;937	unsigned long timeout = jiffies + msecs_to_jiffies(1);938	uint32_t mem = 0;939 940	mem = cx_read(MC417_RWD);941	if (read)942		cx_set(MC417_OEN, ALT_DATA);943	else {944		cx_clear(MC417_OEN, ALT_DATA);/* D0-D7 out */945		mem &= ~ALT_DATA;946		mem |= (data & ALT_DATA);947	}948 949	if (flag)950		mem |= ALT_AD_RG;951	else952		mem &= ~ALT_AD_RG;953 954	mem &= ~ALT_CS;955	if (read)956		mem = (mem & ~ALT_RD) | ALT_WR;957	else958		mem = (mem & ~ALT_WR) | ALT_RD;959 960	cx_write(MC417_RWD, mem);  /* start RW cycle */961 962	for (;;) {963		mem = cx_read(MC417_RWD);964		if ((mem & ALT_RDY) == 0)965			break;966		if (time_after(jiffies, timeout))967			break;968		udelay(1);969	}970 971	cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS);972	if (read)973		return mem & ALT_DATA;974 975	return 0;976};977 978static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)979{980	struct dib7000p_ops *dib7000p_ops = fe->sec_priv;981 982	return dib7000p_ops->set_gpio(fe, 8, 0, !onoff);983}984 985static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)986{987	return 0;988}989 990static struct dib0070_config dib7070p_dib0070_config = {991	.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,992	.reset = dib7070_tuner_reset,993	.sleep = dib7070_tuner_sleep,994	.clock_khz = 12000,995	.freq_offset_khz_vhf = 550,996	/* .flip_chip = 1, */997};998 999/* DIB7070 generic */1000static struct dibx000_agc_config dib7070_agc_config = {1001	.band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,1002 1003	/*1004	 * P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5,1005	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,1006	 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=01007	 */1008	.setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) |1009		 (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),1010	.inv_gain = 600,1011	.time_stabiliz = 10,1012	.alpha_level = 0,1013	.thlock = 118,1014	.wbd_inv = 0,1015	.wbd_ref = 3530,1016	.wbd_sel = 1,1017	.wbd_alpha = 5,1018	.agc1_max = 65535,1019	.agc1_min = 0,1020	.agc2_max = 65535,1021	.agc2_min = 0,1022	.agc1_pt1 = 0,1023	.agc1_pt2 = 40,1024	.agc1_pt3 = 183,1025	.agc1_slope1 = 206,1026	.agc1_slope2 = 255,1027	.agc2_pt1 = 72,1028	.agc2_pt2 = 152,1029	.agc2_slope1 = 88,1030	.agc2_slope2 = 90,1031	.alpha_mant = 17,1032	.alpha_exp = 27,1033	.beta_mant = 23,1034	.beta_exp = 51,1035	.perform_agc_softsplit = 0,1036};1037 1038static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {1039	.internal = 60000,1040	.sampling = 15000,1041	.pll_prediv = 1,1042	.pll_ratio = 20,1043	.pll_range = 3,1044	.pll_reset = 1,1045	.pll_bypass = 0,1046	.enable_refdiv = 0,1047	.bypclk_div = 0,1048	.IO_CLK_en_core = 1,1049	.ADClkSrc = 1,1050	.modulo = 2,1051	/* refsel, sel, freq_15k */1052	.sad_cfg = (3 << 14) | (1 << 12) | (524 << 0),1053	.ifreq = (0 << 25) | 0,1054	.timf = 20452225,1055	.xtal_hz = 12000000,1056};1057 1058static struct dib7000p_config dib7070p_dib7000p_config = {1059	/* .output_mode = OUTMODE_MPEG2_FIFO, */1060	.output_mode = OUTMODE_MPEG2_SERIAL,1061	/* .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, */1062	.output_mpeg2_in_188_bytes = 1,1063 1064	.agc_config_count = 1,1065	.agc = &dib7070_agc_config,1066	.bw  = &dib7070_bw_config_12_mhz,1067	.tuner_is_baseband = 1,1068	.spur_protect = 1,1069 1070	.gpio_dir = 0xfcef, /* DIB7000P_GPIO_DEFAULT_DIRECTIONS, */1071	.gpio_val = 0x0110, /* DIB7000P_GPIO_DEFAULT_VALUES, */1072	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,1073 1074	.hostbus_diversity = 1,1075};1076 1077static int dvb_register_ci_mac(struct cx23885_tsport *port)1078{1079	struct cx23885_dev *dev = port->dev;1080	struct i2c_client *client_ci = NULL;1081	struct vb2_dvb_frontend *fe0;1082 1083	fe0 = vb2_dvb_get_frontend(&port->frontends, 1);1084	if (!fe0)1085		return -EINVAL;1086 1087	switch (dev->board) {1088	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: {1089		static struct netup_card_info cinfo;1090 1091		netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);1092		memcpy(port->frontends.adapter.proposed_mac,1093				cinfo.port[port->nr - 1].mac, 6);1094		pr_info("NetUP Dual DVB-S2 CI card port%d MAC=%pM\n",1095			port->nr, port->frontends.adapter.proposed_mac);1096 1097		netup_ci_init(port);1098		return 0;1099		}1100	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: {1101		struct altera_ci_config netup_ci_cfg = {1102			.dev = dev,/* magic number to identify*/1103			.adapter = &port->frontends.adapter,/* for CI */1104			.demux = &fe0->dvb.demux,/* for hw pid filter */1105			.fpga_rw = netup_altera_fpga_rw,1106		};1107 1108		altera_ci_init(&netup_ci_cfg, port->nr);1109		return 0;1110		}1111	case CX23885_BOARD_TEVII_S470: {1112		u8 eeprom[256]; /* 24C02 i2c eeprom */1113 1114		if (port->nr != 1)1115			return 0;1116 1117		/* Read entire EEPROM */1118		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;1119		tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom));1120		pr_info("TeVii S470 MAC= %pM\n", eeprom + 0xa0);1121		memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6);1122		return 0;1123		}1124	case CX23885_BOARD_DVBSKY_T9580:1125	case CX23885_BOARD_DVBSKY_S950:1126	case CX23885_BOARD_DVBSKY_S952:1127	case CX23885_BOARD_DVBSKY_T982: {1128		u8 eeprom[256]; /* 24C02 i2c eeprom */1129 1130		if (port->nr > 2)1131			return 0;1132 1133		/* Read entire EEPROM */1134		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;1135		tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom,1136				sizeof(eeprom));1137		pr_info("%s port %d MAC address: %pM\n",1138			cx23885_boards[dev->board].name, port->nr,1139			eeprom + 0xc0 + (port->nr-1) * 8);1140		memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0 +1141			(port->nr-1) * 8, 6);1142		return 0;1143		}1144	case CX23885_BOARD_DVBSKY_S950C:1145	case CX23885_BOARD_DVBSKY_T980C:1146	case CX23885_BOARD_TT_CT2_4500_CI: {1147		u8 eeprom[256]; /* 24C02 i2c eeprom */1148		struct sp2_config sp2_config;1149		struct i2c_board_info info;1150		struct cx23885_i2c *i2c_bus = &dev->i2c_bus[0];1151 1152		/* attach CI */1153		memset(&sp2_config, 0, sizeof(sp2_config));1154		sp2_config.dvb_adap = &port->frontends.adapter;1155		sp2_config.priv = port;1156		sp2_config.ci_control = cx23885_sp2_ci_ctrl;1157		memset(&info, 0, sizeof(struct i2c_board_info));1158		strscpy(info.type, "sp2", I2C_NAME_SIZE);1159		info.addr = 0x40;1160		info.platform_data = &sp2_config;1161		request_module(info.type);1162		client_ci = i2c_new_client_device(&i2c_bus->i2c_adap, &info);1163		if (!i2c_client_has_driver(client_ci))1164			return -ENODEV;1165		if (!try_module_get(client_ci->dev.driver->owner)) {1166			i2c_unregister_device(client_ci);1167			return -ENODEV;1168		}1169		port->i2c_client_ci = client_ci;1170 1171		if (port->nr != 1)1172			return 0;1173 1174		/* Read entire EEPROM */1175		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;1176		tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom,1177				sizeof(eeprom));1178		pr_info("%s MAC address: %pM\n",1179			cx23885_boards[dev->board].name, eeprom + 0xc0);1180		memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0, 6);1181		return 0;1182		}1183	}1184	return 0;1185}1186 1187static int dvb_register(struct cx23885_tsport *port)1188{1189	struct dib7000p_ops dib7000p_ops;1190	struct cx23885_dev *dev = port->dev;1191	struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;1192	struct vb2_dvb_frontend *fe0, *fe1 = NULL;1193	struct si2168_config si2168_config;1194	struct si2165_platform_data si2165_pdata;1195	struct si2157_config si2157_config;1196	struct ts2020_config ts2020_config;1197	struct m88ds3103_platform_data m88ds3103_pdata;1198	struct m88rs6000t_config m88rs6000t_config = {};1199	struct a8293_platform_data a8293_pdata = {};1200	struct i2c_board_info info;1201	struct i2c_adapter *adapter;1202	struct i2c_client *client_demod = NULL, *client_tuner = NULL;1203	struct i2c_client *client_sec = NULL;1204	int (*p_set_voltage)(struct dvb_frontend *fe,1205			     enum fe_sec_voltage voltage) = NULL;1206	int mfe_shared = 0; /* bus not shared by default */1207	int ret;1208 1209	/* Get the first frontend */1210	fe0 = vb2_dvb_get_frontend(&port->frontends, 1);1211	if (!fe0)1212		return -EINVAL;1213 1214	/* init struct vb2_dvb */1215	fe0->dvb.name = dev->name;1216 1217	/* multi-frontend gate control is undefined or defaults to fe0 */1218	port->frontends.gate = 0;1219 1220	/* Sets the gate control callback to be used by i2c command calls */1221	port->gate_ctrl = cx23885_dvb_gate_ctrl;1222 1223	/* init frontend */1224	switch (dev->board) {1225	case CX23885_BOARD_HAUPPAUGE_HVR1250:1226		i2c_bus = &dev->i2c_bus[0];1227		fe0->dvb.frontend = dvb_attach(s5h1409_attach,1228						&hauppauge_generic_config,1229						&i2c_bus->i2c_adap);1230		if (fe0->dvb.frontend == NULL)1231			break;1232		dvb_attach(mt2131_attach, fe0->dvb.frontend,1233			   &i2c_bus->i2c_adap,1234			   &hauppauge_generic_tunerconfig, 0);1235		break;1236	case CX23885_BOARD_HAUPPAUGE_HVR1270:1237	case CX23885_BOARD_HAUPPAUGE_HVR1275:1238		i2c_bus = &dev->i2c_bus[0];1239		fe0->dvb.frontend = dvb_attach(lgdt3305_attach,1240					       &hauppauge_lgdt3305_config,1241					       &i2c_bus->i2c_adap);1242		if (fe0->dvb.frontend == NULL)1243			break;1244		dvb_attach(tda18271_attach, fe0->dvb.frontend,1245			   0x60, &dev->i2c_bus[1].i2c_adap,1246			   &hauppauge_hvr127x_config);1247		if (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1275)1248			cx23885_set_frontend_hook(port, fe0->dvb.frontend);1249		break;1250	case CX23885_BOARD_HAUPPAUGE_HVR1255:1251	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:1252		i2c_bus = &dev->i2c_bus[0];1253		fe0->dvb.frontend = dvb_attach(s5h1411_attach,1254					       &hcw_s5h1411_config,1255					       &i2c_bus->i2c_adap);1256		if (fe0->dvb.frontend == NULL)1257			break;1258 1259		dvb_attach(tda18271_attach, fe0->dvb.frontend,1260			   0x60, &dev->i2c_bus[1].i2c_adap,1261			   &hauppauge_tda18271_config);1262 1263		tda18271_attach(&dev->ts1.analog_fe,1264			0x60, &dev->i2c_bus[1].i2c_adap,1265			&hauppauge_tda18271_config);1266 1267		break;1268	case CX23885_BOARD_HAUPPAUGE_HVR1800:1269		i2c_bus = &dev->i2c_bus[0];1270		switch (alt_tuner) {1271		case 1:1272			fe0->dvb.frontend =1273				dvb_attach(s5h1409_attach,1274					   &hauppauge_ezqam_config,1275					   &i2c_bus->i2c_adap);1276			if (fe0->dvb.frontend == NULL)1277				break;1278 1279			dvb_attach(tda829x_attach, fe0->dvb.frontend,1280				   &dev->i2c_bus[1].i2c_adap, 0x42,1281				   &tda829x_no_probe);1282			dvb_attach(tda18271_attach, fe0->dvb.frontend,1283				   0x60, &dev->i2c_bus[1].i2c_adap,1284				   &hauppauge_tda18271_config);1285			break;1286		case 0:1287		default:1288			fe0->dvb.frontend =1289				dvb_attach(s5h1409_attach,1290					   &hauppauge_generic_config,1291					   &i2c_bus->i2c_adap);1292			if (fe0->dvb.frontend == NULL)1293				break;1294			dvb_attach(mt2131_attach, fe0->dvb.frontend,1295				   &i2c_bus->i2c_adap,1296				   &hauppauge_generic_tunerconfig, 0);1297		}1298		break;1299	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:1300		i2c_bus = &dev->i2c_bus[0];1301		fe0->dvb.frontend = dvb_attach(s5h1409_attach,1302						&hauppauge_hvr1800lp_config,1303						&i2c_bus->i2c_adap);1304		if (fe0->dvb.frontend == NULL)1305			break;1306		dvb_attach(mt2131_attach, fe0->dvb.frontend,1307			   &i2c_bus->i2c_adap,1308			   &hauppauge_generic_tunerconfig, 0);1309		break;1310	case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:1311		i2c_bus = &dev->i2c_bus[0];1312		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,1313					       &fusionhdtv_5_express,1314					       0x0e,1315					       &i2c_bus->i2c_adap);1316		if (fe0->dvb.frontend == NULL)1317			break;1318		dvb_attach(simple_tuner_attach, fe0->dvb.frontend,1319			   &i2c_bus->i2c_adap, 0x61,1320			   TUNER_LG_TDVS_H06XF);1321		break;1322	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:1323		i2c_bus = &dev->i2c_bus[1];1324		fe0->dvb.frontend = dvb_attach(s5h1409_attach,1325						&hauppauge_hvr1500q_config,1326						&dev->i2c_bus[0].i2c_adap);1327		if (fe0->dvb.frontend == NULL)1328			break;1329		dvb_attach(xc5000_attach, fe0->dvb.frontend,1330			   &i2c_bus->i2c_adap,1331			   &hauppauge_hvr1500q_tunerconfig);1332		break;1333	case CX23885_BOARD_HAUPPAUGE_HVR1500:1334		i2c_bus = &dev->i2c_bus[1];1335		fe0->dvb.frontend = dvb_attach(s5h1409_attach,1336						&hauppauge_hvr1500_config,1337						&dev->i2c_bus[0].i2c_adap);1338		if (fe0->dvb.frontend != NULL) {1339			struct dvb_frontend *fe;1340			struct xc2028_config cfg = {1341				.i2c_adap  = &i2c_bus->i2c_adap,1342				.i2c_addr  = 0x61,1343			};1344			static struct xc2028_ctrl ctl = {1345				.fname       = XC2028_DEFAULT_FIRMWARE,1346				.max_len     = 64,1347				.demod       = XC3028_FE_OREN538,1348			};1349 1350			fe = dvb_attach(xc2028_attach,1351					fe0->dvb.frontend, &cfg);1352			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)1353				fe->ops.tuner_ops.set_config(fe, &ctl);1354		}1355		break;1356	case CX23885_BOARD_HAUPPAUGE_HVR1200:1357	case CX23885_BOARD_HAUPPAUGE_HVR1700:1358		i2c_bus = &dev->i2c_bus[0];1359		fe0->dvb.frontend = dvb_attach(tda10048_attach,1360			&hauppauge_hvr1200_config,1361			&i2c_bus->i2c_adap);1362		if (fe0->dvb.frontend == NULL)1363			break;1364		dvb_attach(tda829x_attach, fe0->dvb.frontend,1365			   &dev->i2c_bus[1].i2c_adap, 0x42,1366			   &tda829x_no_probe);1367		dvb_attach(tda18271_attach, fe0->dvb.frontend,1368			   0x60, &dev->i2c_bus[1].i2c_adap,1369			   &hauppauge_hvr1200_tuner_config);1370		break;1371	case CX23885_BOARD_HAUPPAUGE_HVR1210:1372		i2c_bus = &dev->i2c_bus[0];1373		fe0->dvb.frontend = dvb_attach(tda10048_attach,1374			&hauppauge_hvr1210_config,1375			&i2c_bus->i2c_adap);1376		if (fe0->dvb.frontend != NULL) {1377			dvb_attach(tda18271_attach, fe0->dvb.frontend,1378				0x60, &dev->i2c_bus[1].i2c_adap,1379				&hauppauge_hvr1210_tuner_config);1380		}1381		break;1382	case CX23885_BOARD_HAUPPAUGE_HVR1400:1383		i2c_bus = &dev->i2c_bus[0];1384 1385		if (!dvb_attach(dib7000p_attach, &dib7000p_ops))1386			return -ENODEV;1387 1388		fe0->dvb.frontend = dib7000p_ops.init(&i2c_bus->i2c_adap,1389			0x12, &hauppauge_hvr1400_dib7000_config);1390		if (fe0->dvb.frontend != NULL) {1391			struct dvb_frontend *fe;1392			struct xc2028_config cfg = {1393				.i2c_adap  = &dev->i2c_bus[1].i2c_adap,1394				.i2c_addr  = 0x64,1395			};1396			static struct xc2028_ctrl ctl = {1397				.fname   = XC3028L_DEFAULT_FIRMWARE,1398				.max_len = 64,1399				.demod   = XC3028_FE_DIBCOM52,1400				/* This is true for all demods with1401					v36 firmware? */1402				.type    = XC2028_D2633,1403			};1404 1405			fe = dvb_attach(xc2028_attach,1406					fe0->dvb.frontend, &cfg);1407			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)1408				fe->ops.tuner_ops.set_config(fe, &ctl);1409		}1410		break;1411	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:1412		i2c_bus = &dev->i2c_bus[port->nr - 1];1413 1414		fe0->dvb.frontend = dvb_attach(s5h1409_attach,1415						&dvico_s5h1409_config,1416						&i2c_bus->i2c_adap);1417		if (fe0->dvb.frontend == NULL)1418			fe0->dvb.frontend = dvb_attach(s5h1411_attach,1419							&dvico_s5h1411_config,1420							&i2c_bus->i2c_adap);1421		if (fe0->dvb.frontend != NULL)1422			dvb_attach(xc5000_attach, fe0->dvb.frontend,1423				   &i2c_bus->i2c_adap,1424				   &dvico_xc5000_tunerconfig);1425		break;1426	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: {1427		i2c_bus = &dev->i2c_bus[port->nr - 1];1428 1429		fe0->dvb.frontend = dvb_attach(zl10353_attach,1430					       &dvico_fusionhdtv_xc3028,1431					       &i2c_bus->i2c_adap);1432		if (fe0->dvb.frontend != NULL) {1433			struct dvb_frontend      *fe;1434			struct xc2028_config	  cfg = {1435				.i2c_adap  = &i2c_bus->i2c_adap,1436				.i2c_addr  = 0x61,1437			};1438			static struct xc2028_ctrl ctl = {1439				.fname       = XC2028_DEFAULT_FIRMWARE,1440				.max_len     = 64,1441				.demod       = XC3028_FE_ZARLINK456,1442			};1443 1444			fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,1445					&cfg);1446			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)1447				fe->ops.tuner_ops.set_config(fe, &ctl);1448		}1449		break;1450	}1451	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2: {1452		i2c_bus = &dev->i2c_bus[port->nr - 1];1453		/* cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); */1454		/* cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); */1455 1456		if (!dvb_attach(dib7000p_attach, &dib7000p_ops))1457			return -ENODEV;1458 1459		if (dib7000p_ops.i2c_enumeration(&i2c_bus->i2c_adap, 1, 0x12, &dib7070p_dib7000p_config) < 0) {1460			pr_warn("Unable to enumerate dib7000p\n");1461			return -ENODEV;1462		}1463		fe0->dvb.frontend = dib7000p_ops.init(&i2c_bus->i2c_adap, 0x80, &dib7070p_dib7000p_config);1464		if (fe0->dvb.frontend != NULL) {1465			struct i2c_adapter *tun_i2c;1466 1467			fe0->dvb.frontend->sec_priv = kmemdup(&dib7000p_ops, sizeof(dib7000p_ops), GFP_KERNEL);1468			if (!fe0->dvb.frontend->sec_priv)1469				return -ENOMEM;1470			tun_i2c = dib7000p_ops.get_i2c_master(fe0->dvb.frontend, DIBX000_I2C_INTERFACE_TUNER, 1);1471			if (!dvb_attach(dib0070_attach, fe0->dvb.frontend, tun_i2c, &dib7070p_dib0070_config))1472				return -ENODEV;1473		}1474		break;1475	}1476	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:1477	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:1478	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:1479		i2c_bus = &dev->i2c_bus[0];1480 1481		fe0->dvb.frontend = dvb_attach(zl10353_attach,1482			&dvico_fusionhdtv_xc3028,1483			&i2c_bus->i2c_adap);1484		if (fe0->dvb.frontend != NULL) {1485			struct dvb_frontend      *fe;1486			struct xc2028_config	  cfg = {1487				.i2c_adap  = &dev->i2c_bus[1].i2c_adap,1488				.i2c_addr  = 0x61,1489			};1490			static struct xc2028_ctrl ctl = {1491				.fname       = XC2028_DEFAULT_FIRMWARE,1492				.max_len     = 64,1493				.demod       = XC3028_FE_ZARLINK456,1494			};1495 1496			fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,1497				&cfg);1498			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)1499				fe->ops.tuner_ops.set_config(fe, &ctl);1500		}1501		break;1502	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:1503		i2c_bus = &dev->i2c_bus[0];1504 1505		fe0->dvb.frontend = dvb_attach(zl10353_attach,1506					       &dvico_fusionhdtv_xc3028,1507					       &i2c_bus->i2c_adap);1508		if (fe0->dvb.frontend != NULL) {1509			struct dvb_frontend	*fe;1510			struct xc4000_config	cfg = {1511				.i2c_address	  = 0x61,1512				.default_pm	  = 0,1513				.dvb_amplitude	  = 134,1514				.set_smoothedcvbs = 1,1515				.if_khz		  = 45601516			};1517 1518			fe = dvb_attach(xc4000_attach, fe0->dvb.frontend,1519					&dev->i2c_bus[1].i2c_adap, &cfg);1520			if (!fe) {1521				pr_err("%s/2: xc4000 attach failed\n",1522				       dev->name);1523				goto frontend_detach;1524			}1525		}1526		break;1527	case CX23885_BOARD_TBS_6920:1528		i2c_bus = &dev->i2c_bus[1];1529 1530		fe0->dvb.frontend = dvb_attach(cx24116_attach,1531					&tbs_cx24116_config,1532					&i2c_bus->i2c_adap);1533		if (fe0->dvb.frontend != NULL)1534			fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;1535 1536		break;1537	case CX23885_BOARD_TBS_6980:1538	case CX23885_BOARD_TBS_6981:1539		i2c_bus = &dev->i2c_bus[1];1540 1541		switch (port->nr) {1542		/* PORT B */1543		case 1:1544			fe0->dvb.frontend = dvb_attach(cx24117_attach,1545					&tbs_cx24117_config,1546					&i2c_bus->i2c_adap);1547			break;1548		/* PORT C */1549		case 2:1550			fe0->dvb.frontend = dvb_attach(cx24117_attach,1551					&tbs_cx24117_config,1552					&i2c_bus->i2c_adap);1553			break;1554		}1555		break;1556	case CX23885_BOARD_TEVII_S470:1557		i2c_bus = &dev->i2c_bus[1];1558 1559		fe0->dvb.frontend = dvb_attach(ds3000_attach,1560					&tevii_ds3000_config,1561					&i2c_bus->i2c_adap);1562		if (fe0->dvb.frontend != NULL) {1563			dvb_attach(ts2020_attach, fe0->dvb.frontend,1564				&tevii_ts2020_config, &i2c_bus->i2c_adap);1565			fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;1566		}1567 1568		break;1569	case CX23885_BOARD_DVBWORLD_2005:1570		i2c_bus = &dev->i2c_bus[1];1571 1572		fe0->dvb.frontend = dvb_attach(cx24116_attach,1573			&dvbworld_cx24116_config,1574			&i2c_bus->i2c_adap);1575		break;1576	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:1577		i2c_bus = &dev->i2c_bus[0];1578		switch (port->nr) {1579		/* port B */1580		case 1:1581			fe0->dvb.frontend = dvb_attach(stv0900_attach,1582							&netup_stv0900_config,1583							&i2c_bus->i2c_adap, 0);1584			if (fe0->dvb.frontend != NULL) {1585				if (dvb_attach(stv6110_attach,1586						fe0->dvb.frontend,1587						&netup_stv6110_tunerconfig_a,1588						&i2c_bus->i2c_adap)) {1589					if (!dvb_attach(lnbh24_attach,1590							fe0->dvb.frontend,1591							&i2c_bus->i2c_adap,1592							LNBH24_PCL | LNBH24_TTX,1593							LNBH24_TEN, 0x09))1594						pr_err("No LNBH24 found!\n");1595 1596				}1597			}1598			break;1599		/* port C */1600		case 2:1601			fe0->dvb.frontend = dvb_attach(stv0900_attach,1602							&netup_stv0900_config,1603							&i2c_bus->i2c_adap, 1);1604			if (fe0->dvb.frontend != NULL) {1605				if (dvb_attach(stv6110_attach,1606						fe0->dvb.frontend,1607						&netup_stv6110_tunerconfig_b,1608						&i2c_bus->i2c_adap)) {1609					if (!dvb_attach(lnbh24_attach,1610							fe0->dvb.frontend,1611							&i2c_bus->i2c_adap,1612							LNBH24_PCL | LNBH24_TTX,1613							LNBH24_TEN, 0x0a))1614						pr_err("No LNBH24 found!\n");1615 1616				}1617			}1618			break;1619		}1620		break;1621	case CX23885_BOARD_MYGICA_X8506:1622		i2c_bus = &dev->i2c_bus[0];1623		i2c_bus2 = &dev->i2c_bus[1];1624		fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,1625			&mygica_x8506_lgs8gl5_config,1626			&i2c_bus->i2c_adap);1627		if (fe0->dvb.frontend == NULL)1628			break;1629		dvb_attach(xc5000_attach, fe0->dvb.frontend,1630			   &i2c_bus2->i2c_adap, &mygica_x8506_xc5000_config);1631		cx23885_set_frontend_hook(port, fe0->dvb.frontend);1632		break;1633	case CX23885_BOARD_MYGICA_X8507:1634		i2c_bus = &dev->i2c_bus[0];1635		i2c_bus2 = &dev->i2c_bus[1];1636		fe0->dvb.frontend = dvb_attach(mb86a20s_attach,1637			&mygica_x8507_mb86a20s_config,1638			&i2c_bus->i2c_adap);1639		if (fe0->dvb.frontend == NULL)1640			break;1641 1642		dvb_attach(xc5000_attach, fe0->dvb.frontend,1643			   &i2c_bus2->i2c_adap,1644			   &mygica_x8507_xc5000_config);1645		cx23885_set_frontend_hook(port, fe0->dvb.frontend);1646		break;1647	case CX23885_BOARD_MAGICPRO_PROHDTVE2:1648		i2c_bus = &dev->i2c_bus[0];1649		i2c_bus2 = &dev->i2c_bus[1];1650		fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,1651			&magicpro_prohdtve2_lgs8g75_config,1652			&i2c_bus->i2c_adap);1653		if (fe0->dvb.frontend == NULL)1654			break;1655		dvb_attach(xc5000_attach, fe0->dvb.frontend,1656			   &i2c_bus2->i2c_adap,1657			   &magicpro_prohdtve2_xc5000_config);1658		cx23885_set_frontend_hook(port, fe0->dvb.frontend);1659		break;1660	case CX23885_BOARD_HAUPPAUGE_HVR1850:1661		i2c_bus = &dev->i2c_bus[0];1662		fe0->dvb.frontend = dvb_attach(s5h1411_attach,1663			&hcw_s5h1411_config,1664			&i2c_bus->i2c_adap);1665		if (fe0->dvb.frontend == NULL)1666			break;1667		dvb_attach(tda18271_attach, fe0->dvb.frontend,1668			   0x60, &dev->i2c_bus[0].i2c_adap,1669			   &hauppauge_tda18271_config);1670 1671		tda18271_attach(&dev->ts1.analog_fe,1672			0x60, &dev->i2c_bus[1].i2c_adap,1673			&hauppauge_tda18271_config);1674 1675		break;1676	case CX23885_BOARD_HAUPPAUGE_HVR1290:1677		i2c_bus = &dev->i2c_bus[0];1678		fe0->dvb.frontend = dvb_attach(s5h1411_attach,1679			&hcw_s5h1411_config,1680			&i2c_bus->i2c_adap);1681		if (fe0->dvb.frontend == NULL)1682			break;1683		dvb_attach(tda18271_attach, fe0->dvb.frontend,1684			   0x60, &dev->i2c_bus[0].i2c_adap,1685			   &hauppauge_tda18271_config);1686		break;1687	case CX23885_BOARD_MYGICA_X8558PRO:1688		switch (port->nr) {1689		/* port B */1690		case 1:1691			i2c_bus = &dev->i2c_bus[0];1692			fe0->dvb.frontend = dvb_attach(atbm8830_attach,1693				&mygica_x8558pro_atbm8830_cfg1,1694				&i2c_bus->i2c_adap);1695			if (fe0->dvb.frontend == NULL)1696				break;1697			dvb_attach(max2165_attach, fe0->dvb.frontend,1698				   &i2c_bus->i2c_adap,1699				   &mygic_x8558pro_max2165_cfg1);1700			break;1701		/* port C */1702		case 2:1703			i2c_bus = &dev->i2c_bus[1];1704			fe0->dvb.frontend = dvb_attach(atbm8830_attach,1705				&mygica_x8558pro_atbm8830_cfg2,1706				&i2c_bus->i2c_adap);1707			if (fe0->dvb.frontend == NULL)1708				break;1709			dvb_attach(max2165_attach, fe0->dvb.frontend,1710				   &i2c_bus->i2c_adap,1711				   &mygic_x8558pro_max2165_cfg2);1712		}1713		break;1714	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:1715		if (port->nr > 2)1716			return 0;1717 1718		i2c_bus = &dev->i2c_bus[0];1719		mfe_shared = 1;/* MFE */1720		port->frontends.gate = 0;/* not clear for me yet */1721		/* ports B, C */1722		/* MFE frontend 1 DVB-T */1723		fe0->dvb.frontend = dvb_attach(stv0367ter_attach,1724					&netup_stv0367_config[port->nr - 1],1725					&i2c_bus->i2c_adap);1726		if (fe0->dvb.frontend == NULL)1727			break;1728		if (NULL == dvb_attach(xc5000_attach, fe0->dvb.frontend,1729					&i2c_bus->i2c_adap,1730					&netup_xc5000_config[port->nr - 1]))1731			goto frontend_detach;1732		/* load xc5000 firmware */1733		fe0->dvb.frontend->ops.tuner_ops.init(fe0->dvb.frontend);1734 1735		/* MFE frontend 2 */1736		fe1 = vb2_dvb_get_frontend(&port->frontends, 2);1737		if (fe1 == NULL)1738			goto frontend_detach;1739		/* DVB-C init */1740		fe1->dvb.frontend = dvb_attach(stv0367cab_attach,1741					&netup_stv0367_config[port->nr - 1],1742					&i2c_bus->i2c_adap);1743		if (fe1->dvb.frontend == NULL)1744			break;1745 1746		fe1->dvb.frontend->id = 1;1747		if (NULL == dvb_attach(xc5000_attach,1748				       fe1->dvb.frontend,1749				       &i2c_bus->i2c_adap,1750				       &netup_xc5000_config[port->nr - 1]))1751			goto frontend_detach;1752		break;1753	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:1754		i2c_bus = &dev->i2c_bus[0];1755		i2c_bus2 = &dev->i2c_bus[1];1756 1757		switch (port->nr) {1758		/* port b */1759		case 1:1760			fe0->dvb.frontend = dvb_attach(drxk_attach,1761					&terratec_drxk_config[0],1762					&i2c_bus->i2c_adap);1763			if (fe0->dvb.frontend == NULL)1764				break;1765			if (!dvb_attach(mt2063_attach,1766					fe0->dvb.frontend,1767					&terratec_mt2063_config[0],1768					&i2c_bus2->i2c_adap))1769				goto frontend_detach;1770			break;1771		/* port c */1772		case 2:1773			fe0->dvb.frontend = dvb_attach(drxk_attach,1774					&terratec_drxk_config[1],1775					&i2c_bus->i2c_adap);1776			if (fe0->dvb.frontend == NULL)1777				break;1778			if (!dvb_attach(mt2063_attach,1779					fe0->dvb.frontend,1780					&terratec_mt2063_config[1],1781					&i2c_bus2->i2c_adap))1782				goto frontend_detach;1783			break;1784		}1785		break;1786	case CX23885_BOARD_TEVII_S471:1787		i2c_bus = &dev->i2c_bus[1];1788 1789		fe0->dvb.frontend = dvb_attach(ds3000_attach,1790					&tevii_ds3000_config,1791					&i2c_bus->i2c_adap);1792		if (fe0->dvb.frontend == NULL)1793			break;1794		dvb_attach(ts2020_attach, fe0->dvb.frontend,1795			   &tevii_ts2020_config, &i2c_bus->i2c_adap);1796		break;1797	case CX23885_BOARD_PROF_8000:1798		i2c_bus = &dev->i2c_bus[0];1799 1800		fe0->dvb.frontend = dvb_attach(stv090x_attach,1801						&prof_8000_stv090x_config,1802						&i2c_bus->i2c_adap,1803						STV090x_DEMODULATOR_0);1804		if (fe0->dvb.frontend == NULL)1805			break;1806		if (!dvb_attach(stb6100_attach,1807				fe0->dvb.frontend,1808				&prof_8000_stb6100_config,1809				&i2c_bus->i2c_adap))1810			goto frontend_detach;1811 1812		fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage;1813		break;1814	case CX23885_BOARD_HAUPPAUGE_HVR4400: {1815		struct tda10071_platform_data tda10071_pdata = hauppauge_tda10071_pdata;1816		struct a8293_platform_data a8293_pdata = {};1817 1818		i2c_bus = &dev->i2c_bus[0];1819		i2c_bus2 = &dev->i2c_bus[1];1820		switch (port->nr) {1821		/* port b */1822		case 1:1823			/* attach demod + tuner combo */1824			memset(&info, 0, sizeof(info));1825			strscpy(info.type, "tda10071_cx24118", I2C_NAME_SIZE);1826			info.addr = 0x05;1827			info.platform_data = &tda10071_pdata;1828			request_module("tda10071");1829			client_demod = i2c_new_client_device(&i2c_bus->i2c_adap, &info);1830			if (!i2c_client_has_driver(client_demod))1831				goto frontend_detach;1832			if (!try_module_get(client_demod->dev.driver->owner)) {1833				i2c_unregister_device(client_demod);1834				goto frontend_detach;1835			}1836			fe0->dvb.frontend = tda10071_pdata.get_dvb_frontend(client_demod);1837			port->i2c_client_demod = client_demod;1838 1839			/* attach SEC */1840			a8293_pdata.dvb_frontend = fe0->dvb.frontend;1841			memset(&info, 0, sizeof(info));1842			strscpy(info.type, "a8293", I2C_NAME_SIZE);1843			info.addr = 0x0b;1844			info.platform_data = &a8293_pdata;1845			request_module("a8293");1846			client_sec = i2c_new_client_device(&i2c_bus->i2c_adap, &info);1847			if (!i2c_client_has_driver(client_sec))1848				goto frontend_detach;1849			if (!try_module_get(client_sec->dev.driver->owner)) {1850				i2c_unregister_device(client_sec);1851				goto frontend_detach;1852			}1853			port->i2c_client_sec = client_sec;1854			break;1855		/* port c */1856		case 2:1857			/* attach frontend */1858			memset(&si2165_pdata, 0, sizeof(si2165_pdata));1859			si2165_pdata.fe = &fe0->dvb.frontend;1860			si2165_pdata.chip_mode = SI2165_MODE_PLL_XTAL;1861			si2165_pdata.ref_freq_hz = 16000000;1862			memset(&info, 0, sizeof(struct i2c_board_info));1863			strscpy(info.type, "si2165", I2C_NAME_SIZE);1864			info.addr = 0x64;1865			info.platform_data = &si2165_pdata;1866			request_module(info.type);1867			client_demod = i2c_new_client_device(&i2c_bus->i2c_adap, &info);1868			if (!i2c_client_has_driver(client_demod))1869				goto frontend_detach;1870			if (!try_module_get(client_demod->dev.driver->owner)) {1871				i2c_unregister_device(client_demod);1872				goto frontend_detach;1873			}1874			port->i2c_client_demod = client_demod;1875 1876			if (fe0->dvb.frontend == NULL)1877				break;1878			fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;1879			if (!dvb_attach(tda18271_attach,1880					fe0->dvb.frontend,1881					0x60, &i2c_bus2->i2c_adap,1882				  &hauppauge_hvr4400_tuner_config))1883				goto frontend_detach;1884			break;1885		}1886		break;1887	}1888	case CX23885_BOARD_HAUPPAUGE_STARBURST: {1889		struct tda10071_platform_data tda10071_pdata = hauppauge_tda10071_pdata;1890		struct a8293_platform_data a8293_pdata = {};1891 1892		i2c_bus = &dev->i2c_bus[0];1893 1894		/* attach demod + tuner combo */1895		memset(&info, 0, sizeof(info));1896		strscpy(info.type, "tda10071_cx24118", I2C_NAME_SIZE);1897		info.addr = 0x05;1898		info.platform_data = &tda10071_pdata;1899		request_module("tda10071");1900		client_demod = i2c_new_client_device(&i2c_bus->i2c_adap, &info);1901		if (!i2c_client_has_driver(client_demod))1902			goto frontend_detach;1903		if (!try_module_get(client_demod->dev.driver->owner)) {1904			i2c_unregister_device(client_demod);1905			goto frontend_detach;1906		}1907		fe0->dvb.frontend = tda10071_pdata.get_dvb_frontend(client_demod);1908		port->i2c_client_demod = client_demod;1909 1910		/* attach SEC */1911		a8293_pdata.dvb_frontend = fe0->dvb.frontend;1912		memset(&info, 0, sizeof(info));1913		strscpy(info.type, "a8293", I2C_NAME_SIZE);1914		info.addr = 0x0b;1915		info.platform_data = &a8293_pdata;1916		request_module("a8293");1917		client_sec = i2c_new_client_device(&i2c_bus->i2c_adap, &info);1918		if (!i2c_client_has_driver(client_sec))1919			goto frontend_detach;1920		if (!try_module_get(client_sec->dev.driver->owner)) {1921			i2c_unregister_device(client_sec);1922			goto frontend_detach;1923		}1924		port->i2c_client_sec = client_sec;1925		break;1926	}1927	case CX23885_BOARD_DVBSKY_T9580:1928	case CX23885_BOARD_DVBSKY_S950:1929		i2c_bus = &dev->i2c_bus[0];1930		i2c_bus2 = &dev->i2c_bus[1];1931		switch (port->nr) {1932		/* port b - satellite */1933		case 1:1934			/* attach frontend */1935			fe0->dvb.frontend = dvb_attach(m88ds3103_attach,1936					&dvbsky_t9580_m88ds3103_config,1937					&i2c_bus2->i2c_adap, &adapter);1938			if (fe0->dvb.frontend == NULL)1939				break;1940 1941			/* attach tuner */1942			memset(&ts2020_config, 0, sizeof(ts2020_config));1943			ts2020_config.fe = fe0->dvb.frontend;1944			ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm;1945			memset(&info, 0, sizeof(struct i2c_board_info));1946			strscpy(info.type, "ts2020", I2C_NAME_SIZE);1947			info.addr = 0x60;1948			info.platform_data = &ts2020_config;1949			request_module(info.type);1950			client_tuner = i2c_new_client_device(adapter, &info);1951			if (!i2c_client_has_driver(client_tuner))1952				goto frontend_detach;1953			if (!try_module_get(client_tuner->dev.driver->owner)) {1954				i2c_unregister_device(client_tuner);1955				goto frontend_detach;1956			}1957 1958			/* delegate signal strength measurement to tuner */1959			fe0->dvb.frontend->ops.read_signal_strength =1960				fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;1961 1962			/*1963			 * for setting the voltage we need to set GPIOs on1964			 * the card.1965			 */1966			port->fe_set_voltage =1967				fe0->dvb.frontend->ops.set_voltage;1968			fe0->dvb.frontend->ops.set_voltage =1969				dvbsky_t9580_set_voltage;1970 1971			port->i2c_client_tuner = client_tuner;1972 1973			break;1974		/* port c - terrestrial/cable */1975		case 2:1976			/* attach frontend */1977			memset(&si2168_config, 0, sizeof(si2168_config));1978			si2168_config.i2c_adapter = &adapter;1979			si2168_config.fe = &fe0->dvb.frontend;1980			si2168_config.ts_mode = SI2168_TS_SERIAL;1981			memset(&info, 0, sizeof(struct i2c_board_info));1982			strscpy(info.type, "si2168", I2C_NAME_SIZE);1983			info.addr = 0x64;1984			info.platform_data = &si2168_config;1985			request_module(info.type);1986			client_demod = i2c_new_client_device(&i2c_bus->i2c_adap, &info);1987			if (!i2c_client_has_driver(client_demod))1988				goto frontend_detach;1989			if (!try_module_get(client_demod->dev.driver->owner)) {1990				i2c_unregister_device(client_demod);1991				goto frontend_detach;1992			}1993			port->i2c_client_demod = client_demod;1994 1995			/* attach tuner */1996			memset(&si2157_config, 0, sizeof(si2157_config));1997			si2157_config.fe = fe0->dvb.frontend;1998			si2157_config.if_port = 1;1999			memset(&info, 0, sizeof(struct i2c_board_info));2000			strscpy(info.type, "si2157", I2C_NAME_SIZE);2001			info.addr = 0x60;2002			info.platform_data = &si2157_config;2003			request_module(info.type);2004			client_tuner = i2c_new_client_device(adapter, &info);2005			if (!i2c_client_has_driver(client_tuner))2006				goto frontend_detach;2007 2008			if (!try_module_get(client_tuner->dev.driver->owner)) {2009				i2c_unregister_device(client_tuner);2010				goto frontend_detach;2011			}2012			port->i2c_client_tuner = client_tuner;2013			break;2014		}2015		break;2016	case CX23885_BOARD_DVBSKY_T980C:2017	case CX23885_BOARD_TT_CT2_4500_CI:2018		i2c_bus = &dev->i2c_bus[0];2019		i2c_bus2 = &dev->i2c_bus[1];2020 2021		/* attach frontend */2022		memset(&si2168_config, 0, sizeof(si2168_config));2023		si2168_config.i2c_adapter = &adapter;2024		si2168_config.fe = &fe0->dvb.frontend;2025		si2168_config.ts_mode = SI2168_TS_PARALLEL;2026		memset(&info, 0, sizeof(struct i2c_board_info));2027		strscpy(info.type, "si2168", I2C_NAME_SIZE);2028		info.addr = 0x64;2029		info.platform_data = &si2168_config;2030		request_module(info.type);2031		client_demod = i2c_new_client_device(&i2c_bus2->i2c_adap, &info);2032		if (!i2c_client_has_driver(client_demod))2033			goto frontend_detach;2034		if (!try_module_get(client_demod->dev.driver->owner)) {2035			i2c_unregister_device(client_demod);2036			goto frontend_detach;2037		}2038		port->i2c_client_demod = client_demod;2039 2040		/* attach tuner */2041		memset(&si2157_config, 0, sizeof(si2157_config));2042		si2157_config.fe = fe0->dvb.frontend;2043		si2157_config.if_port = 1;2044		memset(&info, 0, sizeof(struct i2c_board_info));2045		strscpy(info.type, "si2157", I2C_NAME_SIZE);2046		info.addr = 0x60;2047		info.platform_data = &si2157_config;2048		request_module(info.type);2049		client_tuner = i2c_new_client_device(adapter, &info);2050		if (!i2c_client_has_driver(client_tuner))2051			goto frontend_detach;2052		if (!try_module_get(client_tuner->dev.driver->owner)) {2053			i2c_unregister_device(client_tuner);2054			goto frontend_detach;2055		}2056		port->i2c_client_tuner = client_tuner;2057		break;2058	case CX23885_BOARD_DVBSKY_S950C:2059		i2c_bus = &dev->i2c_bus[0];2060		i2c_bus2 = &dev->i2c_bus[1];2061 2062		/* attach frontend */2063		fe0->dvb.frontend = dvb_attach(m88ds3103_attach,2064				&dvbsky_s950c_m88ds3103_config,2065				&i2c_bus2->i2c_adap, &adapter);2066		if (fe0->dvb.frontend == NULL)2067			break;2068 2069		/* attach tuner */2070		memset(&ts2020_config, 0, sizeof(ts2020_config));2071		ts2020_config.fe = fe0->dvb.frontend;2072		ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm;2073		memset(&info, 0, sizeof(struct i2c_board_info));2074		strscpy(info.type, "ts2020", I2C_NAME_SIZE);2075		info.addr = 0x60;2076		info.platform_data = &ts2020_config;2077		request_module(info.type);2078		client_tuner = i2c_new_client_device(adapter, &info);2079		if (!i2c_client_has_driver(client_tuner))2080			goto frontend_detach;2081		if (!try_module_get(client_tuner->dev.driver->owner)) {2082			i2c_unregister_device(client_tuner);2083			goto frontend_detach;2084		}2085 2086		/* delegate signal strength measurement to tuner */2087		fe0->dvb.frontend->ops.read_signal_strength =2088			fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;2089 2090		port->i2c_client_tuner = client_tuner;2091		break;2092	case CX23885_BOARD_DVBSKY_S952:2093		/* attach frontend */2094		memset(&m88ds3103_pdata, 0, sizeof(m88ds3103_pdata));2095		m88ds3103_pdata.clk = 27000000;2096		m88ds3103_pdata.i2c_wr_max = 33;2097		m88ds3103_pdata.agc = 0x99;2098		m88ds3103_pdata.clk_out = M88DS3103_CLOCK_OUT_DISABLED;2099		m88ds3103_pdata.lnb_en_pol = 1;2100 2101		switch (port->nr) {2102		/* port b */2103		case 1:2104			i2c_bus = &dev->i2c_bus[1];2105			m88ds3103_pdata.ts_mode = M88DS3103_TS_PARALLEL;2106			m88ds3103_pdata.ts_clk = 16000;2107			m88ds3103_pdata.ts_clk_pol = 1;2108			p_set_voltage = dvbsky_t9580_set_voltage;2109			break;2110		/* port c */2111		case 2:2112			i2c_bus = &dev->i2c_bus[0];2113			m88ds3103_pdata.ts_mode = M88DS3103_TS_SERIAL;2114			m88ds3103_pdata.ts_clk = 96000;2115			m88ds3103_pdata.ts_clk_pol = 0;2116			p_set_voltage = dvbsky_s952_portc_set_voltage;2117			break;2118		default:2119			return 0;2120		}2121 2122		memset(&info, 0, sizeof(info));2123		strscpy(info.type, "m88ds3103", I2C_NAME_SIZE);2124		info.addr = 0x68;2125		info.platform_data = &m88ds3103_pdata;2126		request_module(info.type);2127		client_demod = i2c_new_client_device(&i2c_bus->i2c_adap, &info);2128		if (!i2c_client_has_driver(client_demod))2129			goto frontend_detach;2130		if (!try_module_get(client_demod->dev.driver->owner)) {2131			i2c_unregister_device(client_demod);2132			goto frontend_detach;2133		}2134		port->i2c_client_demod = client_demod;2135		adapter = m88ds3103_pdata.get_i2c_adapter(client_demod);2136		fe0->dvb.frontend = m88ds3103_pdata.get_dvb_frontend(client_demod);2137 2138		/* attach tuner */2139		memset(&ts2020_config, 0, sizeof(ts2020_config));2140		ts2020_config.fe = fe0->dvb.frontend;2141		ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm;2142		memset(&info, 0, sizeof(struct i2c_board_info));2143		strscpy(info.type, "ts2020", I2C_NAME_SIZE);2144		info.addr = 0x60;2145		info.platform_data = &ts2020_config;2146		request_module(info.type);2147		client_tuner = i2c_new_client_device(adapter, &info);2148		if (!i2c_client_has_driver(client_tuner))2149			goto frontend_detach;2150		if (!try_module_get(client_tuner->dev.driver->owner)) {2151			i2c_unregister_device(client_tuner);2152			goto frontend_detach;2153		}2154 2155		/* delegate signal strength measurement to tuner */2156		fe0->dvb.frontend->ops.read_signal_strength =2157			fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;2158 2159		/*2160		 * for setting the voltage we need to set GPIOs on2161		 * the card.2162		 */2163		port->fe_set_voltage =2164			fe0->dvb.frontend->ops.set_voltage;2165		fe0->dvb.frontend->ops.set_voltage = p_set_voltage;2166 2167		port->i2c_client_tuner = client_tuner;2168		break;2169	case CX23885_BOARD_DVBSKY_T982:2170		memset(&si2168_config, 0, sizeof(si2168_config));2171		switch (port->nr) {2172		/* port b */2173		case 1:2174			i2c_bus = &dev->i2c_bus[1];2175			si2168_config.ts_mode = SI2168_TS_PARALLEL;2176			break;2177		/* port c */2178		case 2:2179			i2c_bus = &dev->i2c_bus[0];2180			si2168_config.ts_mode = SI2168_TS_SERIAL;2181			break;2182		}2183 2184		/* attach frontend */2185		si2168_config.i2c_adapter = &adapter;2186		si2168_config.fe = &fe0->dvb.frontend;2187		memset(&info, 0, sizeof(struct i2c_board_info));2188		strscpy(info.type, "si2168", I2C_NAME_SIZE);2189		info.addr = 0x64;2190		info.platform_data = &si2168_config;2191		request_module(info.type);2192		client_demod = i2c_new_client_device(&i2c_bus->i2c_adap, &info);2193		if (!i2c_client_has_driver(client_demod))2194			goto frontend_detach;2195		if (!try_module_get(client_demod->dev.driver->owner)) {2196			i2c_unregister_device(client_demod);2197			goto frontend_detach;2198		}2199		port->i2c_client_demod = client_demod;2200 2201		/* attach tuner */2202		memset(&si2157_config, 0, sizeof(si2157_config));2203		si2157_config.fe = fe0->dvb.frontend;2204		si2157_config.if_port = 1;2205		memset(&info, 0, sizeof(struct i2c_board_info));2206		strscpy(info.type, "si2157", I2C_NAME_SIZE);2207		info.addr = 0x60;2208		info.platform_data = &si2157_config;2209		request_module(info.type);2210		client_tuner = i2c_new_client_device(adapter, &info);2211		if (!i2c_client_has_driver(client_tuner))2212			goto frontend_detach;2213		if (!try_module_get(client_tuner->dev.driver->owner)) {2214			i2c_unregister_device(client_tuner);2215			goto frontend_detach;2216		}2217		port->i2c_client_tuner = client_tuner;2218		break;2219	case CX23885_BOARD_HAUPPAUGE_STARBURST2:2220	case CX23885_BOARD_HAUPPAUGE_HVR5525:2221		i2c_bus = &dev->i2c_bus[0];2222		i2c_bus2 = &dev->i2c_bus[1];2223 2224		switch (port->nr) {2225 2226		/* port b - satellite */2227		case 1:2228			/* attach frontend */2229			fe0->dvb.frontend = dvb_attach(m88ds3103_attach,2230					&hauppauge_hvr5525_m88ds3103_config,2231					&i2c_bus->i2c_adap, &adapter);2232			if (fe0->dvb.frontend == NULL)2233				break;2234 2235			/* attach SEC */2236			a8293_pdata.dvb_frontend = fe0->dvb.frontend;2237			memset(&info, 0, sizeof(info));2238			strscpy(info.type, "a8293", I2C_NAME_SIZE);2239			info.addr = 0x0b;2240			info.platform_data = &a8293_pdata;2241			request_module("a8293");2242			client_sec = i2c_new_client_device(&i2c_bus->i2c_adap, &info);2243			if (!i2c_client_has_driver(client_sec))2244				goto frontend_detach;2245			if (!try_module_get(client_sec->dev.driver->owner)) {2246				i2c_unregister_device(client_sec);2247				goto frontend_detach;2248			}2249			port->i2c_client_sec = client_sec;2250 2251			/* attach tuner */2252			memset(&m88rs6000t_config, 0, sizeof(m88rs6000t_config));2253			m88rs6000t_config.fe = fe0->dvb.frontend;2254			memset(&info, 0, sizeof(struct i2c_board_info));2255			strscpy(info.type, "m88rs6000t", I2C_NAME_SIZE);2256			info.addr = 0x21;2257			info.platform_data = &m88rs6000t_config;2258			request_module("%s", info.type);2259			client_tuner = i2c_new_client_device(adapter, &info);2260			if (!i2c_client_has_driver(client_tuner))2261				goto frontend_detach;2262			if (!try_module_get(client_tuner->dev.driver->owner)) {2263				i2c_unregister_device(client_tuner);2264				goto frontend_detach;2265			}2266			port->i2c_client_tuner = client_tuner;2267 2268			/* delegate signal strength measurement to tuner */2269			fe0->dvb.frontend->ops.read_signal_strength =2270				fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;2271			break;2272		/* port c - terrestrial/cable */2273		case 2:2274			/* attach frontend */2275			memset(&si2168_config, 0, sizeof(si2168_config));2276			si2168_config.i2c_adapter = &adapter;2277			si2168_config.fe = &fe0->dvb.frontend;2278			si2168_config.ts_mode = SI2168_TS_SERIAL;2279			memset(&info, 0, sizeof(struct i2c_board_info));2280			strscpy(info.type, "si2168", I2C_NAME_SIZE);2281			info.addr = 0x64;2282			info.platform_data = &si2168_config;2283			request_module("%s", info.type);2284			client_demod = i2c_new_client_device(&i2c_bus->i2c_adap, &info);2285			if (!i2c_client_has_driver(client_demod))2286				goto frontend_detach;2287			if (!try_module_get(client_demod->dev.driver->owner)) {2288				i2c_unregister_device(client_demod);2289				goto frontend_detach;2290			}2291			port->i2c_client_demod = client_demod;2292 2293			/* attach tuner */2294			memset(&si2157_config, 0, sizeof(si2157_config));2295			si2157_config.fe = fe0->dvb.frontend;2296			si2157_config.if_port = 1;2297			memset(&info, 0, sizeof(struct i2c_board_info));2298			strscpy(info.type, "si2157", I2C_NAME_SIZE);2299			info.addr = 0x60;2300			info.platform_data = &si2157_config;2301			request_module("%s", info.type);2302			client_tuner = i2c_new_client_device(&i2c_bus2->i2c_adap, &info);2303			if (!i2c_client_has_driver(client_tuner)) {2304				module_put(client_demod->dev.driver->owner);2305				i2c_unregister_device(client_demod);2306				port->i2c_client_demod = NULL;2307				goto frontend_detach;2308			}2309			if (!try_module_get(client_tuner->dev.driver->owner)) {2310				i2c_unregister_device(client_tuner);2311				module_put(client_demod->dev.driver->owner);2312				i2c_unregister_device(client_demod);2313				port->i2c_client_demod = NULL;2314				goto frontend_detach;2315			}2316			port->i2c_client_tuner = client_tuner;2317 2318			dev->ts1.analog_fe.tuner_priv = client_tuner;2319			memcpy(&dev->ts1.analog_fe.ops.tuner_ops,2320			       &fe0->dvb.frontend->ops.tuner_ops,2321			       sizeof(struct dvb_tuner_ops));2322 2323			break;2324		}2325		break;2326	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:2327	case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB_885:2328		pr_info("%s(): board=%d port=%d\n", __func__,2329			dev->board, port->nr);2330		switch (port->nr) {2331		/* port b - Terrestrial/cable */2332		case 1:2333			/* attach frontend */2334			memset(&si2168_config, 0, sizeof(si2168_config));2335			si2168_config.i2c_adapter = &adapter;2336			si2168_config.fe = &fe0->dvb.frontend;2337			si2168_config.ts_mode = SI2168_TS_SERIAL;2338			memset(&info, 0, sizeof(struct i2c_board_info));2339			strscpy(info.type, "si2168", I2C_NAME_SIZE);2340			info.addr = 0x64;2341			info.platform_data = &si2168_config;2342			request_module("%s", info.type);2343			client_demod = i2c_new_client_device(&dev->i2c_bus[0].i2c_adap, &info);2344			if (!i2c_client_has_driver(client_demod))2345				goto frontend_detach;2346			if (!try_module_get(client_demod->dev.driver->owner)) {2347				i2c_unregister_device(client_demod);2348				goto frontend_detach;2349			}2350			port->i2c_client_demod = client_demod;2351 2352			/* attach tuner */2353			memset(&si2157_config, 0, sizeof(si2157_config));2354			si2157_config.fe = fe0->dvb.frontend;2355			si2157_config.if_port = 1;2356			memset(&info, 0, sizeof(struct i2c_board_info));2357			strscpy(info.type, "si2157", I2C_NAME_SIZE);2358			info.addr = 0x60;2359			info.platform_data = &si2157_config;2360			request_module("%s", info.type);2361			client_tuner = i2c_new_client_device(&dev->i2c_bus[1].i2c_adap, &info);2362			if (!i2c_client_has_driver(client_tuner)) {2363				module_put(client_demod->dev.driver->owner);2364				i2c_unregister_device(client_demod);2365				port->i2c_client_demod = NULL;2366				goto frontend_detach;2367			}2368			if (!try_module_get(client_tuner->dev.driver->owner)) {2369				i2c_unregister_device(client_tuner);2370				module_put(client_demod->dev.driver->owner);2371				i2c_unregister_device(client_demod);2372				port->i2c_client_demod = NULL;2373				goto frontend_detach;2374			}2375			port->i2c_client_tuner = client_tuner;2376 2377			/* we only attach tuner for analog on the 888 version */2378			if (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_DVB) {2379				pr_info("%s(): QUADHD_DVB analog setup\n",2380					__func__);2381				dev->ts1.analog_fe.tuner_priv = client_tuner;2382				memcpy(&dev->ts1.analog_fe.ops.tuner_ops,2383				       &fe0->dvb.frontend->ops.tuner_ops,2384				       sizeof(struct dvb_tuner_ops));2385			}2386			break;2387 2388		/* port c - terrestrial/cable */2389		case 2:2390			/* attach frontend */2391			memset(&si2168_config, 0, sizeof(si2168_config));2392			si2168_config.i2c_adapter = &adapter;2393			si2168_config.fe = &fe0->dvb.frontend;2394			si2168_config.ts_mode = SI2168_TS_SERIAL;2395			memset(&info, 0, sizeof(struct i2c_board_info));2396			strscpy(info.type, "si2168", I2C_NAME_SIZE);2397			info.addr = 0x66;2398			info.platform_data = &si2168_config;2399			request_module("%s", info.type);2400			client_demod = i2c_new_client_device(&dev->i2c_bus[0].i2c_adap, &info);2401			if (!i2c_client_has_driver(client_demod))2402				goto frontend_detach;2403			if (!try_module_get(client_demod->dev.driver->owner)) {2404				i2c_unregister_device(client_demod);2405				goto frontend_detach;2406			}2407			port->i2c_client_demod = client_demod;2408 2409			/* attach tuner */2410			memset(&si2157_config, 0, sizeof(si2157_config));2411			si2157_config.fe = fe0->dvb.frontend;2412			si2157_config.if_port = 1;2413			memset(&info, 0, sizeof(struct i2c_board_info));2414			strscpy(info.type, "si2157", I2C_NAME_SIZE);2415			info.addr = 0x62;2416			info.platform_data = &si2157_config;2417			request_module("%s", info.type);2418			client_tuner = i2c_new_client_device(&dev->i2c_bus[1].i2c_adap, &info);2419			if (!i2c_client_has_driver(client_tuner)) {2420				module_put(client_demod->dev.driver->owner);2421				i2c_unregister_device(client_demod);2422				port->i2c_client_demod = NULL;2423				goto frontend_detach;2424			}2425			if (!try_module_get(client_tuner->dev.driver->owner)) {2426				i2c_unregister_device(client_tuner);2427				module_put(client_demod->dev.driver->owner);2428				i2c_unregister_device(client_demod);2429				port->i2c_client_demod = NULL;2430				goto frontend_detach;2431			}2432			port->i2c_client_tuner = client_tuner;2433			break;2434		}2435		break;2436	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC:2437	case CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC_885:2438		pr_info("%s(): board=%d port=%d\n", __func__,2439			dev->board, port->nr);2440		switch (port->nr) {2441		/* port b - Terrestrial/cable */2442		case 1:2443			/* attach frontend */2444			i2c_bus = &dev->i2c_bus[0];2445			fe0->dvb.frontend = dvb_attach(lgdt3306a_attach,2446				&hauppauge_quadHD_ATSC_a_config, &i2c_bus->i2c_adap);2447			if (fe0->dvb.frontend == NULL)2448				break;2449 2450			/* attach tuner */2451			memset(&si2157_config, 0, sizeof(si2157_config));2452			si2157_config.fe = fe0->dvb.frontend;2453			si2157_config.if_port = 1;2454			si2157_config.inversion = 1;2455			memset(&info, 0, sizeof(struct i2c_board_info));2456			strscpy(info.type, "si2157", I2C_NAME_SIZE);2457			info.addr = 0x60;2458			info.platform_data = &si2157_config;2459			request_module("%s", info.type);2460			client_tuner = i2c_new_client_device(&dev->i2c_bus[1].i2c_adap, &info);2461			if (!i2c_client_has_driver(client_tuner)) {2462				goto frontend_detach;2463			}2464			if (!try_module_get(client_tuner->dev.driver->owner)) {2465				i2c_unregister_device(client_tuner);2466				goto frontend_detach;2467			}2468			port->i2c_client_tuner = client_tuner;2469 2470			/* we only attach tuner for analog on the 888 version */2471			if (dev->board == CX23885_BOARD_HAUPPAUGE_QUADHD_ATSC) {2472				pr_info("%s(): QUADHD_ATSC analog setup\n",2473					__func__);2474				dev->ts1.analog_fe.tuner_priv = client_tuner;2475				memcpy(&dev->ts1.analog_fe.ops.tuner_ops,2476				       &fe0->dvb.frontend->ops.tuner_ops,2477				       sizeof(struct dvb_tuner_ops));2478			}2479			break;2480 2481		/* port c - terrestrial/cable */2482		case 2:2483			/* attach frontend */2484			i2c_bus = &dev->i2c_bus[0];2485			fe0->dvb.frontend = dvb_attach(lgdt3306a_attach,2486				&hauppauge_quadHD_ATSC_b_config, &i2c_bus->i2c_adap);2487			if (fe0->dvb.frontend == NULL)2488				break;2489 2490			/* attach tuner */2491			memset(&si2157_config, 0, sizeof(si2157_config));2492			si2157_config.fe = fe0->dvb.frontend;2493			si2157_config.if_port = 1;2494			si2157_config.inversion = 1;2495			memset(&info, 0, sizeof(struct i2c_board_info));2496			strscpy(info.type, "si2157", I2C_NAME_SIZE);2497			info.addr = 0x62;2498			info.platform_data = &si2157_config;2499			request_module("%s", info.type);2500			client_tuner = i2c_new_client_device(&dev->i2c_bus[1].i2c_adap, &info);2501			if (!i2c_client_has_driver(client_tuner)) {2502				goto frontend_detach;2503			}2504			if (!try_module_get(client_tuner->dev.driver->owner)) {2505				i2c_unregister_device(client_tuner);2506				goto frontend_detach;2507			}2508			port->i2c_client_tuner = client_tuner;2509			break;2510		}2511		break;2512	case CX23885_BOARD_HAUPPAUGE_HVR1265_K4:2513		switch (port->nr) {2514		/* port c - Terrestrial/cable */2515		case 2:2516			/* attach frontend */2517			i2c_bus = &dev->i2c_bus[0];2518			fe0->dvb.frontend = dvb_attach(lgdt3306a_attach,2519					&hauppauge_hvr1265k4_config,2520					&i2c_bus->i2c_adap);2521			if (fe0->dvb.frontend == NULL)2522				break;2523 2524			/* attach tuner */2525			memset(&si2157_config, 0, sizeof(si2157_config));2526			si2157_config.fe = fe0->dvb.frontend;2527			si2157_config.if_port = 1;2528			si2157_config.inversion = 1;2529			memset(&info, 0, sizeof(struct i2c_board_info));2530			strscpy(info.type, "si2157", I2C_NAME_SIZE);2531			info.addr = 0x60;2532			info.platform_data = &si2157_config;2533			request_module("%s", info.type);2534			client_tuner = i2c_new_client_device(&dev->i2c_bus[1].i2c_adap, &info);2535			if (!i2c_client_has_driver(client_tuner))2536				goto frontend_detach;2537 2538			if (!try_module_get(client_tuner->dev.driver->owner)) {2539				i2c_unregister_device(client_tuner);2540				client_tuner = NULL;2541				goto frontend_detach;2542			}2543			port->i2c_client_tuner = client_tuner;2544 2545			dev->ts1.analog_fe.tuner_priv = client_tuner;2546			memcpy(&dev->ts1.analog_fe.ops.tuner_ops,2547			       &fe0->dvb.frontend->ops.tuner_ops,2548			       sizeof(struct dvb_tuner_ops));2549			break;2550		}2551		break;2552	default:2553		pr_info("%s: The frontend of your DVB/ATSC card  isn't supported yet\n",2554			dev->name);2555		break;2556	}2557 2558	if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) {2559		pr_err("%s: frontend initialization failed\n",2560		       dev->name);2561		goto frontend_detach;2562	}2563 2564	/* define general-purpose callback pointer */2565	fe0->dvb.frontend->callback = cx23885_tuner_callback;2566	if (fe1)2567		fe1->dvb.frontend->callback = cx23885_tuner_callback;2568#if 02569	/* Ensure all frontends negotiate bus access */2570	fe0->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;2571	if (fe1)2572		fe1->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;2573#endif2574 2575	/* Put the tuner in standby to keep it quiet */2576	call_all(dev, tuner, standby);2577 2578	if (fe0->dvb.frontend->ops.analog_ops.standby)2579		fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);2580 2581	/* register everything */2582	ret = vb2_dvb_register_bus(&port->frontends, THIS_MODULE, port,2583				   &dev->pci->dev, NULL,2584				   adapter_nr, mfe_shared);2585	if (ret)2586		goto frontend_detach;2587 2588	ret = dvb_register_ci_mac(port);2589	if (ret)2590		goto frontend_detach;2591 2592	return 0;2593 2594frontend_detach:2595	/* remove I2C client for SEC */2596	client_sec = port->i2c_client_sec;2597	if (client_sec) {2598		module_put(client_sec->dev.driver->owner);2599		i2c_unregister_device(client_sec);2600		port->i2c_client_sec = NULL;2601	}2602 2603	/* remove I2C client for tuner */2604	client_tuner = port->i2c_client_tuner;2605	if (client_tuner) {2606		module_put(client_tuner->dev.driver->owner);2607		i2c_unregister_device(client_tuner);2608		port->i2c_client_tuner = NULL;2609	}2610 2611	/* remove I2C client for demodulator */2612	client_demod = port->i2c_client_demod;2613	if (client_demod) {2614		module_put(client_demod->dev.driver->owner);2615		i2c_unregister_device(client_demod);2616		port->i2c_client_demod = NULL;2617	}2618 2619	port->gate_ctrl = NULL;2620	vb2_dvb_dealloc_frontends(&port->frontends);2621	return -EINVAL;2622}2623 2624int cx23885_dvb_register(struct cx23885_tsport *port)2625{2626 2627	struct vb2_dvb_frontend *fe0;2628	struct cx23885_dev *dev = port->dev;2629	int err, i;2630 2631	/* Here we need to allocate the correct number of frontends,2632	 * as reflected in the cards struct. The reality is that currently2633	 * no cx23885 boards support this - yet. But, if we don't modify this2634	 * code then the second frontend would never be allocated (later)2635	 * and fail with error before the attach in dvb_register().2636	 * Without these changes we risk an OOPS later. The changes here2637	 * are for safety, and should provide a good foundation for the2638	 * future addition of any multi-frontend cx23885 based boards.2639	 */2640	pr_info("%s() allocating %d frontend(s)\n", __func__,2641		port->num_frontends);2642 2643	for (i = 1; i <= port->num_frontends; i++) {2644		struct vb2_queue *q;2645 2646		if (vb2_dvb_alloc_frontend(2647			&port->frontends, i) == NULL) {2648			pr_err("%s() failed to alloc\n", __func__);2649			return -ENOMEM;2650		}2651 2652		fe0 = vb2_dvb_get_frontend(&port->frontends, i);2653		if (!fe0)2654			return -EINVAL;2655 2656		dprintk(1, "%s\n", __func__);2657		dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n",2658			dev->board,2659			dev->name,2660			dev->pci_bus,2661			dev->pci_slot);2662 2663		/* dvb stuff */2664		/* We have to init the queue for each frontend on a port. */2665		pr_info("%s: cx23885 based dvb card\n", dev->name);2666		q = &fe0->dvb.dvbq;2667		q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;2668		q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;2669		q->gfp_flags = GFP_DMA32;2670		q->min_queued_buffers = 2;2671		q->drv_priv = port;2672		q->buf_struct_size = sizeof(struct cx23885_buffer);2673		q->ops = &dvb_qops;2674		q->mem_ops = &vb2_dma_sg_memops;2675		q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;2676		q->lock = &dev->lock;2677		q->dev = &dev->pci->dev;2678 2679		err = vb2_queue_init(q);2680		if (err < 0)2681			return err;2682	}2683	err = dvb_register(port);2684	if (err != 0)2685		pr_err("%s() dvb_register failed err = %d\n",2686		       __func__, err);2687 2688	return err;2689}2690 2691int cx23885_dvb_unregister(struct cx23885_tsport *port)2692{2693	struct vb2_dvb_frontend *fe0;2694	struct i2c_client *client;2695 2696	fe0 = vb2_dvb_get_frontend(&port->frontends, 1);2697 2698	if (fe0 && fe0->dvb.frontend)2699		vb2_dvb_unregister_bus(&port->frontends);2700 2701	/* remove I2C client for CI */2702	client = port->i2c_client_ci;2703	if (client) {2704		module_put(client->dev.driver->owner);2705		i2c_unregister_device(client);2706	}2707 2708	/* remove I2C client for SEC */2709	client = port->i2c_client_sec;2710	if (client) {2711		module_put(client->dev.driver->owner);2712		i2c_unregister_device(client);2713	}2714 2715	/* remove I2C client for tuner */2716	client = port->i2c_client_tuner;2717	if (client) {2718		module_put(client->dev.driver->owner);2719		i2c_unregister_device(client);2720	}2721 2722	/* remove I2C client for demodulator */2723	client = port->i2c_client_demod;2724	if (client) {2725		module_put(client->dev.driver->owner);2726		i2c_unregister_device(client);2727	}2728 2729	switch (port->dev->board) {2730	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:2731		netup_ci_exit(port);2732		break;2733	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:2734		altera_ci_release(port->dev, port->nr);2735		break;2736	}2737 2738	port->gate_ctrl = NULL;2739 2740	return 0;2741}2742