1200 lines · c
1// SPDX-License-Identifier: GPL-2.0-or-later2/*3 * driver for ENE KB3926 B/C/D/E/F CIR (pnp id: ENE0XXX)4 *5 * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>6 *7 * Special thanks to:8 * Sami R. <maesesami@gmail.com> for lot of help in debugging and therefore9 * bringing to life support for transmission & learning mode.10 *11 * Charlie Andrews <charliethepilot@googlemail.com> for lots of help in12 * bringing up the support of new firmware buffer that is popular13 * on latest notebooks14 *15 * ENE for partial device documentation16 */17 18#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt19 20#include <linux/kernel.h>21#include <linux/module.h>22#include <linux/pnp.h>23#include <linux/io.h>24#include <linux/interrupt.h>25#include <linux/sched.h>26#include <linux/slab.h>27#include <media/rc-core.h>28#include "ene_ir.h"29 30static int sample_period;31static bool learning_mode_force;32static int debug;33static bool txsim;34 35static void ene_set_reg_addr(struct ene_device *dev, u16 reg)36{37 outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);38 outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);39}40 41/* read a hardware register */42static u8 ene_read_reg(struct ene_device *dev, u16 reg)43{44 u8 retval;45 ene_set_reg_addr(dev, reg);46 retval = inb(dev->hw_io + ENE_IO);47 dbg_regs("reg %04x == %02x", reg, retval);48 return retval;49}50 51/* write a hardware register */52static void ene_write_reg(struct ene_device *dev, u16 reg, u8 value)53{54 dbg_regs("reg %04x <- %02x", reg, value);55 ene_set_reg_addr(dev, reg);56 outb(value, dev->hw_io + ENE_IO);57}58 59/* Set bits in hardware register */60static void ene_set_reg_mask(struct ene_device *dev, u16 reg, u8 mask)61{62 dbg_regs("reg %04x |= %02x", reg, mask);63 ene_set_reg_addr(dev, reg);64 outb(inb(dev->hw_io + ENE_IO) | mask, dev->hw_io + ENE_IO);65}66 67/* Clear bits in hardware register */68static void ene_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask)69{70 dbg_regs("reg %04x &= ~%02x ", reg, mask);71 ene_set_reg_addr(dev, reg);72 outb(inb(dev->hw_io + ENE_IO) & ~mask, dev->hw_io + ENE_IO);73}74 75/* A helper to set/clear a bit in register according to boolean variable */76static void ene_set_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask,77 bool set)78{79 if (set)80 ene_set_reg_mask(dev, reg, mask);81 else82 ene_clear_reg_mask(dev, reg, mask);83}84 85/* detect hardware features */86static int ene_hw_detect(struct ene_device *dev)87{88 u8 chip_major, chip_minor;89 u8 hw_revision, old_ver;90 u8 fw_reg2, fw_reg1;91 92 ene_clear_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD);93 chip_major = ene_read_reg(dev, ENE_ECVER_MAJOR);94 chip_minor = ene_read_reg(dev, ENE_ECVER_MINOR);95 ene_set_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD);96 97 hw_revision = ene_read_reg(dev, ENE_ECHV);98 old_ver = ene_read_reg(dev, ENE_HW_VER_OLD);99 100 dev->pll_freq = (ene_read_reg(dev, ENE_PLLFRH) << 4) +101 (ene_read_reg(dev, ENE_PLLFRL) >> 4);102 103 if (sample_period != ENE_DEFAULT_SAMPLE_PERIOD)104 dev->rx_period_adjust =105 dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 2 : 4;106 107 if (hw_revision == 0xFF) {108 pr_warn("device seems to be disabled\n");109 pr_warn("send a mail to lirc-list@lists.sourceforge.net\n");110 pr_warn("please attach output of acpidump and dmidecode\n");111 return -ENODEV;112 }113 114 pr_notice("chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x\n",115 chip_major, chip_minor, old_ver, hw_revision);116 117 pr_notice("PLL freq = %d\n", dev->pll_freq);118 119 if (chip_major == 0x33) {120 pr_warn("chips 0x33xx aren't supported\n");121 return -ENODEV;122 }123 124 if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {125 dev->hw_revision = ENE_HW_C;126 pr_notice("KB3926C detected\n");127 } else if (old_ver == 0x24 && hw_revision == 0xC0) {128 dev->hw_revision = ENE_HW_B;129 pr_notice("KB3926B detected\n");130 } else {131 dev->hw_revision = ENE_HW_D;132 pr_notice("KB3926D or higher detected\n");133 }134 135 /* detect features hardware supports */136 if (dev->hw_revision < ENE_HW_C)137 return 0;138 139 fw_reg1 = ene_read_reg(dev, ENE_FW1);140 fw_reg2 = ene_read_reg(dev, ENE_FW2);141 142 pr_notice("Firmware regs: %02x %02x\n", fw_reg1, fw_reg2);143 144 dev->hw_use_gpio_0a = !!(fw_reg2 & ENE_FW2_GP0A);145 dev->hw_learning_and_tx_capable = !!(fw_reg2 & ENE_FW2_LEARNING);146 dev->hw_extra_buffer = !!(fw_reg1 & ENE_FW1_HAS_EXTRA_BUF);147 148 if (dev->hw_learning_and_tx_capable)149 dev->hw_fan_input = !!(fw_reg2 & ENE_FW2_FAN_INPUT);150 151 pr_notice("Hardware features:\n");152 153 if (dev->hw_learning_and_tx_capable) {154 pr_notice("* Supports transmitting & learning mode\n");155 pr_notice(" This feature is rare and therefore,\n");156 pr_notice(" you are welcome to test it,\n");157 pr_notice(" and/or contact the author via:\n");158 pr_notice(" lirc-list@lists.sourceforge.net\n");159 pr_notice(" or maximlevitsky@gmail.com\n");160 161 pr_notice("* Uses GPIO %s for IR raw input\n",162 dev->hw_use_gpio_0a ? "40" : "0A");163 164 if (dev->hw_fan_input)165 pr_notice("* Uses unused fan feedback input as source of demodulated IR data\n");166 }167 168 if (!dev->hw_fan_input)169 pr_notice("* Uses GPIO %s for IR demodulated input\n",170 dev->hw_use_gpio_0a ? "0A" : "40");171 172 if (dev->hw_extra_buffer)173 pr_notice("* Uses new style input buffer\n");174 return 0;175}176 177/* Read properties of hw sample buffer */178static void ene_rx_setup_hw_buffer(struct ene_device *dev)179{180 u16 tmp;181 182 ene_rx_read_hw_pointer(dev);183 dev->r_pointer = dev->w_pointer;184 185 if (!dev->hw_extra_buffer) {186 dev->buffer_len = ENE_FW_PACKET_SIZE * 2;187 return;188 }189 190 tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER);191 tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER+1) << 8;192 dev->extra_buf1_address = tmp;193 194 dev->extra_buf1_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 2);195 196 tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 3);197 tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 4) << 8;198 dev->extra_buf2_address = tmp;199 200 dev->extra_buf2_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 5);201 202 dev->buffer_len = dev->extra_buf1_len + dev->extra_buf2_len + 8;203 204 pr_notice("Hardware uses 2 extended buffers:\n");205 pr_notice(" 0x%04x - len : %d\n",206 dev->extra_buf1_address, dev->extra_buf1_len);207 pr_notice(" 0x%04x - len : %d\n",208 dev->extra_buf2_address, dev->extra_buf2_len);209 210 pr_notice("Total buffer len = %d\n", dev->buffer_len);211 212 if (dev->buffer_len > 64 || dev->buffer_len < 16)213 goto error;214 215 if (dev->extra_buf1_address > 0xFBFC ||216 dev->extra_buf1_address < 0xEC00)217 goto error;218 219 if (dev->extra_buf2_address > 0xFBFC ||220 dev->extra_buf2_address < 0xEC00)221 goto error;222 223 if (dev->r_pointer > dev->buffer_len)224 goto error;225 226 ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);227 return;228error:229 pr_warn("Error validating extra buffers, device probably won't work\n");230 dev->hw_extra_buffer = false;231 ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);232}233 234 235/* Restore the pointers to extra buffers - to make module reload work*/236static void ene_rx_restore_hw_buffer(struct ene_device *dev)237{238 if (!dev->hw_extra_buffer)239 return;240 241 ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 0,242 dev->extra_buf1_address & 0xFF);243 ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 1,244 dev->extra_buf1_address >> 8);245 ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 2, dev->extra_buf1_len);246 247 ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 3,248 dev->extra_buf2_address & 0xFF);249 ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 4,250 dev->extra_buf2_address >> 8);251 ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 5,252 dev->extra_buf2_len);253 ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);254}255 256/* Read hardware write pointer */257static void ene_rx_read_hw_pointer(struct ene_device *dev)258{259 if (dev->hw_extra_buffer)260 dev->w_pointer = ene_read_reg(dev, ENE_FW_RX_POINTER);261 else262 dev->w_pointer = ene_read_reg(dev, ENE_FW2)263 & ENE_FW2_BUF_WPTR ? 0 : ENE_FW_PACKET_SIZE;264 265 dbg_verbose("RB: HW write pointer: %02x, driver read pointer: %02x",266 dev->w_pointer, dev->r_pointer);267}268 269/* Gets address of next sample from HW ring buffer */270static int ene_rx_get_sample_reg(struct ene_device *dev)271{272 int r_pointer;273 274 if (dev->r_pointer == dev->w_pointer) {275 dbg_verbose("RB: hit end, try update w_pointer");276 ene_rx_read_hw_pointer(dev);277 }278 279 if (dev->r_pointer == dev->w_pointer) {280 dbg_verbose("RB: end of data at %d", dev->r_pointer);281 return 0;282 }283 284 dbg_verbose("RB: reading at offset %d", dev->r_pointer);285 r_pointer = dev->r_pointer;286 287 dev->r_pointer++;288 if (dev->r_pointer == dev->buffer_len)289 dev->r_pointer = 0;290 291 dbg_verbose("RB: next read will be from offset %d", dev->r_pointer);292 293 if (r_pointer < 8) {294 dbg_verbose("RB: read at main buffer at %d", r_pointer);295 return ENE_FW_SAMPLE_BUFFER + r_pointer;296 }297 298 r_pointer -= 8;299 300 if (r_pointer < dev->extra_buf1_len) {301 dbg_verbose("RB: read at 1st extra buffer at %d", r_pointer);302 return dev->extra_buf1_address + r_pointer;303 }304 305 r_pointer -= dev->extra_buf1_len;306 307 if (r_pointer < dev->extra_buf2_len) {308 dbg_verbose("RB: read at 2nd extra buffer at %d", r_pointer);309 return dev->extra_buf2_address + r_pointer;310 }311 312 dbg("attempt to read beyond ring buffer end");313 return 0;314}315 316/* Sense current received carrier */317static void ene_rx_sense_carrier(struct ene_device *dev)318{319 int carrier, duty_cycle;320 int period = ene_read_reg(dev, ENE_CIRCAR_PRD);321 int hperiod = ene_read_reg(dev, ENE_CIRCAR_HPRD);322 323 if (!(period & ENE_CIRCAR_PRD_VALID))324 return;325 326 period &= ~ENE_CIRCAR_PRD_VALID;327 328 if (!period)329 return;330 331 dbg("RX: hardware carrier period = %02x", period);332 dbg("RX: hardware carrier pulse period = %02x", hperiod);333 334 carrier = 2000000 / period;335 duty_cycle = (hperiod * 100) / period;336 dbg("RX: sensed carrier = %d Hz, duty cycle %d%%",337 carrier, duty_cycle);338 if (dev->carrier_detect_enabled) {339 struct ir_raw_event ev = {340 .carrier_report = true,341 .carrier = carrier,342 .duty_cycle = duty_cycle343 };344 ir_raw_event_store(dev->rdev, &ev);345 }346}347 348/* this enables/disables the CIR RX engine */349static void ene_rx_enable_cir_engine(struct ene_device *dev, bool enable)350{351 ene_set_clear_reg_mask(dev, ENE_CIRCFG,352 ENE_CIRCFG_RX_EN | ENE_CIRCFG_RX_IRQ, enable);353}354 355/* this selects input for CIR engine. Ether GPIO 0A or GPIO40*/356static void ene_rx_select_input(struct ene_device *dev, bool gpio_0a)357{358 ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_GPIO0A, gpio_0a);359}360 361/*362 * this enables alternative input via fan tachometer sensor and bypasses363 * the hw CIR engine364 */365static void ene_rx_enable_fan_input(struct ene_device *dev, bool enable)366{367 if (!dev->hw_fan_input)368 return;369 370 if (!enable)371 ene_write_reg(dev, ENE_FAN_AS_IN1, 0);372 else {373 ene_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);374 ene_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);375 }376}377 378/* setup the receiver for RX*/379static void ene_rx_setup(struct ene_device *dev)380{381 bool learning_mode = dev->learning_mode_enabled ||382 dev->carrier_detect_enabled;383 int sample_period_adjust = 0;384 385 dbg("RX: setup receiver, learning mode = %d", learning_mode);386 387 388 /* This selects RLC input and clears CFG2 settings */389 ene_write_reg(dev, ENE_CIRCFG2, 0x00);390 391 /* set sample period*/392 if (sample_period == ENE_DEFAULT_SAMPLE_PERIOD)393 sample_period_adjust =394 dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 1 : 2;395 396 ene_write_reg(dev, ENE_CIRRLC_CFG,397 (sample_period + sample_period_adjust) |398 ENE_CIRRLC_CFG_OVERFLOW);399 /* revB doesn't support inputs */400 if (dev->hw_revision < ENE_HW_C)401 goto select_timeout;402 403 if (learning_mode) {404 405 WARN_ON(!dev->hw_learning_and_tx_capable);406 407 /* Enable the opposite of the normal input408 That means that if GPIO40 is normally used, use GPIO0A409 and vice versa.410 This input will carry non demodulated411 signal, and we will tell the hw to demodulate it itself */412 ene_rx_select_input(dev, !dev->hw_use_gpio_0a);413 dev->rx_fan_input_inuse = false;414 415 /* Enable carrier demodulation */416 ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD);417 418 /* Enable carrier detection */419 ene_write_reg(dev, ENE_CIRCAR_PULS, 0x63);420 ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT,421 dev->carrier_detect_enabled || debug);422 } else {423 if (dev->hw_fan_input)424 dev->rx_fan_input_inuse = true;425 else426 ene_rx_select_input(dev, dev->hw_use_gpio_0a);427 428 /* Disable carrier detection & demodulation */429 ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD);430 ene_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT);431 }432 433select_timeout:434 if (dev->rx_fan_input_inuse) {435 dev->rdev->rx_resolution = ENE_FW_SAMPLE_PERIOD_FAN;436 437 /* Fan input doesn't support timeouts, it just ends the438 input with a maximum sample */439 dev->rdev->min_timeout = dev->rdev->max_timeout =440 ENE_FW_SMPL_BUF_FAN_MSK *441 ENE_FW_SAMPLE_PERIOD_FAN;442 } else {443 dev->rdev->rx_resolution = sample_period;444 445 /* Theoreticly timeout is unlimited, but we cap it446 * because it was seen that on one device, it447 * would stop sending spaces after around 250 msec.448 * Besides, this is close to 2^32 anyway and timeout is u32.449 */450 dev->rdev->min_timeout = 127 * sample_period;451 dev->rdev->max_timeout = 200000;452 }453 454 if (dev->rdev->timeout > dev->rdev->max_timeout)455 dev->rdev->timeout = dev->rdev->max_timeout;456 if (dev->rdev->timeout < dev->rdev->min_timeout)457 dev->rdev->timeout = dev->rdev->min_timeout;458}459 460/* Enable the device for receive */461static void ene_rx_enable_hw(struct ene_device *dev)462{463 u8 reg_value;464 465 /* Enable system interrupt */466 if (dev->hw_revision < ENE_HW_C) {467 ene_write_reg(dev, ENEB_IRQ, dev->irq << 1);468 ene_write_reg(dev, ENEB_IRQ_UNK1, 0x01);469 } else {470 reg_value = ene_read_reg(dev, ENE_IRQ) & 0xF0;471 reg_value |= ENE_IRQ_UNK_EN;472 reg_value &= ~ENE_IRQ_STATUS;473 reg_value |= (dev->irq & ENE_IRQ_MASK);474 ene_write_reg(dev, ENE_IRQ, reg_value);475 }476 477 /* Enable inputs */478 ene_rx_enable_fan_input(dev, dev->rx_fan_input_inuse);479 ene_rx_enable_cir_engine(dev, !dev->rx_fan_input_inuse);480 481 /* ack any pending irqs - just in case */482 ene_irq_status(dev);483 484 /* enable firmware bits */485 ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);486 487 /* enter idle mode */488 ir_raw_event_set_idle(dev->rdev, true);489}490 491/* Enable the device for receive - wrapper to track the state*/492static void ene_rx_enable(struct ene_device *dev)493{494 ene_rx_enable_hw(dev);495 dev->rx_enabled = true;496}497 498/* Disable the device receiver */499static void ene_rx_disable_hw(struct ene_device *dev)500{501 /* disable inputs */502 ene_rx_enable_cir_engine(dev, false);503 ene_rx_enable_fan_input(dev, false);504 505 /* disable hardware IRQ and firmware flag */506 ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);507 ir_raw_event_set_idle(dev->rdev, true);508}509 510/* Disable the device receiver - wrapper to track the state */511static void ene_rx_disable(struct ene_device *dev)512{513 ene_rx_disable_hw(dev);514 dev->rx_enabled = false;515}516 517/* This resets the receiver. Useful to stop stream of spaces at end of518 * transmission519 */520static void ene_rx_reset(struct ene_device *dev)521{522 ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN);523 ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN);524}525 526/* Set up the TX carrier frequency and duty cycle */527static void ene_tx_set_carrier(struct ene_device *dev)528{529 u8 tx_puls_width;530 unsigned long flags;531 532 spin_lock_irqsave(&dev->hw_lock, flags);533 534 ene_set_clear_reg_mask(dev, ENE_CIRCFG,535 ENE_CIRCFG_TX_CARR, dev->tx_period > 0);536 537 if (!dev->tx_period)538 goto unlock;539 540 BUG_ON(dev->tx_duty_cycle >= 100 || dev->tx_duty_cycle <= 0);541 542 tx_puls_width = dev->tx_period / (100 / dev->tx_duty_cycle);543 544 if (!tx_puls_width)545 tx_puls_width = 1;546 547 dbg("TX: pulse distance = %d * 500 ns", dev->tx_period);548 dbg("TX: pulse width = %d * 500 ns", tx_puls_width);549 550 ene_write_reg(dev, ENE_CIRMOD_PRD, dev->tx_period | ENE_CIRMOD_PRD_POL);551 ene_write_reg(dev, ENE_CIRMOD_HPRD, tx_puls_width);552unlock:553 spin_unlock_irqrestore(&dev->hw_lock, flags);554}555 556/* Enable/disable transmitters */557static void ene_tx_set_transmitters(struct ene_device *dev)558{559 unsigned long flags;560 561 spin_lock_irqsave(&dev->hw_lock, flags);562 ene_set_clear_reg_mask(dev, ENE_GPIOFS8, ENE_GPIOFS8_GPIO41,563 !!(dev->transmitter_mask & 0x01));564 ene_set_clear_reg_mask(dev, ENE_GPIOFS1, ENE_GPIOFS1_GPIO0D,565 !!(dev->transmitter_mask & 0x02));566 spin_unlock_irqrestore(&dev->hw_lock, flags);567}568 569/* prepare transmission */570static void ene_tx_enable(struct ene_device *dev)571{572 u8 conf1 = ene_read_reg(dev, ENE_CIRCFG);573 u8 fwreg2 = ene_read_reg(dev, ENE_FW2);574 575 dev->saved_conf1 = conf1;576 577 /* Show information about currently connected transmitter jacks */578 if (fwreg2 & ENE_FW2_EMMITER1_CONN)579 dbg("TX: Transmitter #1 is connected");580 581 if (fwreg2 & ENE_FW2_EMMITER2_CONN)582 dbg("TX: Transmitter #2 is connected");583 584 if (!(fwreg2 & (ENE_FW2_EMMITER1_CONN | ENE_FW2_EMMITER2_CONN)))585 pr_warn("TX: transmitter cable isn't connected!\n");586 587 /* disable receive on revc */588 if (dev->hw_revision == ENE_HW_C)589 conf1 &= ~ENE_CIRCFG_RX_EN;590 591 /* Enable TX engine */592 conf1 |= ENE_CIRCFG_TX_EN | ENE_CIRCFG_TX_IRQ;593 ene_write_reg(dev, ENE_CIRCFG, conf1);594}595 596/* end transmission */597static void ene_tx_disable(struct ene_device *dev)598{599 ene_write_reg(dev, ENE_CIRCFG, dev->saved_conf1);600 dev->tx_buffer = NULL;601}602 603 604/* TX one sample - must be called with dev->hw_lock*/605static void ene_tx_sample(struct ene_device *dev)606{607 u8 raw_tx;608 u32 sample;609 bool pulse = dev->tx_sample_pulse;610 611 if (!dev->tx_buffer) {612 pr_warn("TX: BUG: attempt to transmit NULL buffer\n");613 return;614 }615 616 /* Grab next TX sample */617 if (!dev->tx_sample) {618 619 if (dev->tx_pos == dev->tx_len) {620 if (!dev->tx_done) {621 dbg("TX: no more data to send");622 dev->tx_done = true;623 goto exit;624 } else {625 dbg("TX: last sample sent by hardware");626 ene_tx_disable(dev);627 complete(&dev->tx_complete);628 return;629 }630 }631 632 sample = dev->tx_buffer[dev->tx_pos++];633 dev->tx_sample_pulse = !dev->tx_sample_pulse;634 635 dev->tx_sample = DIV_ROUND_CLOSEST(sample, sample_period);636 637 if (!dev->tx_sample)638 dev->tx_sample = 1;639 }640 641 raw_tx = min(dev->tx_sample , (unsigned int)ENE_CIRRLC_OUT_MASK);642 dev->tx_sample -= raw_tx;643 644 dbg("TX: sample %8d (%s)", raw_tx * sample_period,645 pulse ? "pulse" : "space");646 if (pulse)647 raw_tx |= ENE_CIRRLC_OUT_PULSE;648 649 ene_write_reg(dev,650 dev->tx_reg ? ENE_CIRRLC_OUT1 : ENE_CIRRLC_OUT0, raw_tx);651 652 dev->tx_reg = !dev->tx_reg;653exit:654 /* simulate TX done interrupt */655 if (txsim)656 mod_timer(&dev->tx_sim_timer, jiffies + HZ / 500);657}658 659/* timer to simulate tx done interrupt */660static void ene_tx_irqsim(struct timer_list *t)661{662 struct ene_device *dev = from_timer(dev, t, tx_sim_timer);663 unsigned long flags;664 665 spin_lock_irqsave(&dev->hw_lock, flags);666 ene_tx_sample(dev);667 spin_unlock_irqrestore(&dev->hw_lock, flags);668}669 670 671/* read irq status and ack it */672static int ene_irq_status(struct ene_device *dev)673{674 u8 irq_status;675 u8 fw_flags1, fw_flags2;676 int retval = 0;677 678 fw_flags2 = ene_read_reg(dev, ENE_FW2);679 680 if (dev->hw_revision < ENE_HW_C) {681 irq_status = ene_read_reg(dev, ENEB_IRQ_STATUS);682 683 if (!(irq_status & ENEB_IRQ_STATUS_IR))684 return 0;685 686 ene_clear_reg_mask(dev, ENEB_IRQ_STATUS, ENEB_IRQ_STATUS_IR);687 return ENE_IRQ_RX;688 }689 690 irq_status = ene_read_reg(dev, ENE_IRQ);691 if (!(irq_status & ENE_IRQ_STATUS))692 return 0;693 694 /* original driver does that twice - a workaround ? */695 ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS);696 ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS);697 698 /* check RX interrupt */699 if (fw_flags2 & ENE_FW2_RXIRQ) {700 retval |= ENE_IRQ_RX;701 ene_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_RXIRQ);702 }703 704 /* check TX interrupt */705 fw_flags1 = ene_read_reg(dev, ENE_FW1);706 if (fw_flags1 & ENE_FW1_TXIRQ) {707 ene_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);708 retval |= ENE_IRQ_TX;709 }710 711 return retval;712}713 714/* interrupt handler */715static irqreturn_t ene_isr(int irq, void *data)716{717 u16 hw_value, reg;718 int hw_sample, irq_status;719 bool pulse;720 unsigned long flags;721 irqreturn_t retval = IRQ_NONE;722 struct ene_device *dev = (struct ene_device *)data;723 struct ir_raw_event ev = {};724 725 spin_lock_irqsave(&dev->hw_lock, flags);726 727 dbg_verbose("ISR called");728 ene_rx_read_hw_pointer(dev);729 irq_status = ene_irq_status(dev);730 731 if (!irq_status)732 goto unlock;733 734 retval = IRQ_HANDLED;735 736 if (irq_status & ENE_IRQ_TX) {737 dbg_verbose("TX interrupt");738 if (!dev->hw_learning_and_tx_capable) {739 dbg("TX interrupt on unsupported device!");740 goto unlock;741 }742 ene_tx_sample(dev);743 }744 745 if (!(irq_status & ENE_IRQ_RX))746 goto unlock;747 748 dbg_verbose("RX interrupt");749 750 if (dev->hw_learning_and_tx_capable)751 ene_rx_sense_carrier(dev);752 753 /* On hardware that don't support extra buffer we need to trust754 the interrupt and not track the read pointer */755 if (!dev->hw_extra_buffer)756 dev->r_pointer = dev->w_pointer == 0 ? ENE_FW_PACKET_SIZE : 0;757 758 while (1) {759 760 reg = ene_rx_get_sample_reg(dev);761 762 dbg_verbose("next sample to read at: %04x", reg);763 if (!reg)764 break;765 766 hw_value = ene_read_reg(dev, reg);767 768 if (dev->rx_fan_input_inuse) {769 770 int offset = ENE_FW_SMPL_BUF_FAN - ENE_FW_SAMPLE_BUFFER;771 772 /* read high part of the sample */773 hw_value |= ene_read_reg(dev, reg + offset) << 8;774 pulse = hw_value & ENE_FW_SMPL_BUF_FAN_PLS;775 776 /* clear space bit, and other unused bits */777 hw_value &= ENE_FW_SMPL_BUF_FAN_MSK;778 hw_sample = hw_value * ENE_FW_SAMPLE_PERIOD_FAN;779 780 } else {781 pulse = !(hw_value & ENE_FW_SAMPLE_SPACE);782 hw_value &= ~ENE_FW_SAMPLE_SPACE;783 hw_sample = hw_value * sample_period;784 785 if (dev->rx_period_adjust) {786 hw_sample *= 100;787 hw_sample /= (100 + dev->rx_period_adjust);788 }789 }790 791 if (!dev->hw_extra_buffer && !hw_sample) {792 dev->r_pointer = dev->w_pointer;793 continue;794 }795 796 dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");797 798 ev.duration = hw_sample;799 ev.pulse = pulse;800 ir_raw_event_store_with_filter(dev->rdev, &ev);801 }802 803 ir_raw_event_handle(dev->rdev);804unlock:805 spin_unlock_irqrestore(&dev->hw_lock, flags);806 return retval;807}808 809/* Initialize default settings */810static void ene_setup_default_settings(struct ene_device *dev)811{812 dev->tx_period = 32;813 dev->tx_duty_cycle = 50; /*%*/814 dev->transmitter_mask = 0x03;815 dev->learning_mode_enabled = learning_mode_force;816 817 /* Set reasonable default timeout */818 dev->rdev->timeout = MS_TO_US(150);819}820 821/* Upload all hardware settings at once. Used at load and resume time */822static void ene_setup_hw_settings(struct ene_device *dev)823{824 if (dev->hw_learning_and_tx_capable) {825 ene_tx_set_carrier(dev);826 ene_tx_set_transmitters(dev);827 }828 829 ene_rx_setup(dev);830}831 832/* outside interface: called on first open*/833static int ene_open(struct rc_dev *rdev)834{835 struct ene_device *dev = rdev->priv;836 unsigned long flags;837 838 spin_lock_irqsave(&dev->hw_lock, flags);839 ene_rx_enable(dev);840 spin_unlock_irqrestore(&dev->hw_lock, flags);841 return 0;842}843 844/* outside interface: called on device close*/845static void ene_close(struct rc_dev *rdev)846{847 struct ene_device *dev = rdev->priv;848 unsigned long flags;849 spin_lock_irqsave(&dev->hw_lock, flags);850 851 ene_rx_disable(dev);852 spin_unlock_irqrestore(&dev->hw_lock, flags);853}854 855/* outside interface: set transmitter mask */856static int ene_set_tx_mask(struct rc_dev *rdev, u32 tx_mask)857{858 struct ene_device *dev = rdev->priv;859 dbg("TX: attempt to set transmitter mask %02x", tx_mask);860 861 /* invalid txmask */862 if (!tx_mask || tx_mask & ~0x03) {863 dbg("TX: invalid mask");864 /* return count of transmitters */865 return 2;866 }867 868 dev->transmitter_mask = tx_mask;869 ene_tx_set_transmitters(dev);870 return 0;871}872 873/* outside interface : set tx carrier */874static int ene_set_tx_carrier(struct rc_dev *rdev, u32 carrier)875{876 struct ene_device *dev = rdev->priv;877 u32 period;878 879 dbg("TX: attempt to set tx carrier to %d kHz", carrier);880 if (carrier == 0)881 return -EINVAL;882 883 period = 2000000 / carrier;884 if (period && (period > ENE_CIRMOD_PRD_MAX ||885 period < ENE_CIRMOD_PRD_MIN)) {886 887 dbg("TX: out of range %d-%d kHz carrier",888 2000 / ENE_CIRMOD_PRD_MIN, 2000 / ENE_CIRMOD_PRD_MAX);889 return -EINVAL;890 }891 892 dev->tx_period = period;893 ene_tx_set_carrier(dev);894 return 0;895}896 897/*outside interface : set tx duty cycle */898static int ene_set_tx_duty_cycle(struct rc_dev *rdev, u32 duty_cycle)899{900 struct ene_device *dev = rdev->priv;901 dbg("TX: setting duty cycle to %d%%", duty_cycle);902 dev->tx_duty_cycle = duty_cycle;903 ene_tx_set_carrier(dev);904 return 0;905}906 907/* outside interface: enable learning mode */908static int ene_set_learning_mode(struct rc_dev *rdev, int enable)909{910 struct ene_device *dev = rdev->priv;911 unsigned long flags;912 if (enable == dev->learning_mode_enabled)913 return 0;914 915 spin_lock_irqsave(&dev->hw_lock, flags);916 dev->learning_mode_enabled = enable;917 ene_rx_disable(dev);918 ene_rx_setup(dev);919 ene_rx_enable(dev);920 spin_unlock_irqrestore(&dev->hw_lock, flags);921 return 0;922}923 924static int ene_set_carrier_report(struct rc_dev *rdev, int enable)925{926 struct ene_device *dev = rdev->priv;927 unsigned long flags;928 929 if (enable == dev->carrier_detect_enabled)930 return 0;931 932 spin_lock_irqsave(&dev->hw_lock, flags);933 dev->carrier_detect_enabled = enable;934 ene_rx_disable(dev);935 ene_rx_setup(dev);936 ene_rx_enable(dev);937 spin_unlock_irqrestore(&dev->hw_lock, flags);938 return 0;939}940 941/* outside interface: enable or disable idle mode */942static void ene_set_idle(struct rc_dev *rdev, bool idle)943{944 struct ene_device *dev = rdev->priv;945 946 if (idle) {947 ene_rx_reset(dev);948 dbg("RX: end of data");949 }950}951 952/* outside interface: transmit */953static int ene_transmit(struct rc_dev *rdev, unsigned *buf, unsigned n)954{955 struct ene_device *dev = rdev->priv;956 unsigned long flags;957 958 dev->tx_buffer = buf;959 dev->tx_len = n;960 dev->tx_pos = 0;961 dev->tx_reg = 0;962 dev->tx_done = 0;963 dev->tx_sample = 0;964 dev->tx_sample_pulse = false;965 966 dbg("TX: %d samples", dev->tx_len);967 968 spin_lock_irqsave(&dev->hw_lock, flags);969 970 ene_tx_enable(dev);971 972 /* Transmit first two samples */973 ene_tx_sample(dev);974 ene_tx_sample(dev);975 976 spin_unlock_irqrestore(&dev->hw_lock, flags);977 978 if (wait_for_completion_timeout(&dev->tx_complete, 2 * HZ) == 0) {979 dbg("TX: timeout");980 spin_lock_irqsave(&dev->hw_lock, flags);981 ene_tx_disable(dev);982 spin_unlock_irqrestore(&dev->hw_lock, flags);983 } else984 dbg("TX: done");985 return n;986}987 988/* probe entry */989static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)990{991 int error = -ENOMEM;992 struct rc_dev *rdev;993 struct ene_device *dev;994 995 /* allocate memory */996 dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);997 rdev = rc_allocate_device(RC_DRIVER_IR_RAW);998 if (!dev || !rdev)999 goto exit_free_dev_rdev;1000 1001 /* validate resources */1002 error = -ENODEV;1003 1004 /* init these to -1, as 0 is valid for both */1005 dev->hw_io = -1;1006 dev->irq = -1;1007 1008 if (!pnp_port_valid(pnp_dev, 0) ||1009 pnp_port_len(pnp_dev, 0) < ENE_IO_SIZE)1010 goto exit_free_dev_rdev;1011 1012 if (!pnp_irq_valid(pnp_dev, 0))1013 goto exit_free_dev_rdev;1014 1015 spin_lock_init(&dev->hw_lock);1016 1017 dev->hw_io = pnp_port_start(pnp_dev, 0);1018 dev->irq = pnp_irq(pnp_dev, 0);1019 1020 1021 pnp_set_drvdata(pnp_dev, dev);1022 dev->pnp_dev = pnp_dev;1023 1024 /* don't allow too short/long sample periods */1025 if (sample_period < 5 || sample_period > 0x7F)1026 sample_period = ENE_DEFAULT_SAMPLE_PERIOD;1027 1028 /* detect hardware version and features */1029 error = ene_hw_detect(dev);1030 if (error)1031 goto exit_free_dev_rdev;1032 1033 if (!dev->hw_learning_and_tx_capable && txsim) {1034 dev->hw_learning_and_tx_capable = true;1035 timer_setup(&dev->tx_sim_timer, ene_tx_irqsim, 0);1036 pr_warn("Simulation of TX activated\n");1037 }1038 1039 if (!dev->hw_learning_and_tx_capable)1040 learning_mode_force = false;1041 1042 rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;1043 rdev->priv = dev;1044 rdev->open = ene_open;1045 rdev->close = ene_close;1046 rdev->s_idle = ene_set_idle;1047 rdev->driver_name = ENE_DRIVER_NAME;1048 rdev->map_name = RC_MAP_RC6_MCE;1049 rdev->device_name = "ENE eHome Infrared Remote Receiver";1050 1051 if (dev->hw_learning_and_tx_capable) {1052 rdev->s_wideband_receiver = ene_set_learning_mode;1053 init_completion(&dev->tx_complete);1054 rdev->tx_ir = ene_transmit;1055 rdev->s_tx_mask = ene_set_tx_mask;1056 rdev->s_tx_carrier = ene_set_tx_carrier;1057 rdev->s_tx_duty_cycle = ene_set_tx_duty_cycle;1058 rdev->s_carrier_report = ene_set_carrier_report;1059 rdev->device_name = "ENE eHome Infrared Remote Transceiver";1060 }1061 1062 dev->rdev = rdev;1063 1064 ene_rx_setup_hw_buffer(dev);1065 ene_setup_default_settings(dev);1066 ene_setup_hw_settings(dev);1067 1068 device_set_wakeup_capable(&pnp_dev->dev, true);1069 device_set_wakeup_enable(&pnp_dev->dev, true);1070 1071 error = rc_register_device(rdev);1072 if (error < 0)1073 goto exit_free_dev_rdev;1074 1075 /* claim the resources */1076 error = -EBUSY;1077 if (!request_region(dev->hw_io, ENE_IO_SIZE, ENE_DRIVER_NAME)) {1078 goto exit_unregister_device;1079 }1080 1081 if (request_irq(dev->irq, ene_isr,1082 IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev)) {1083 goto exit_release_hw_io;1084 }1085 1086 pr_notice("driver has been successfully loaded\n");1087 return 0;1088 1089exit_release_hw_io:1090 release_region(dev->hw_io, ENE_IO_SIZE);1091exit_unregister_device:1092 rc_unregister_device(rdev);1093 rdev = NULL;1094exit_free_dev_rdev:1095 rc_free_device(rdev);1096 kfree(dev);1097 return error;1098}1099 1100/* main unload function */1101static void ene_remove(struct pnp_dev *pnp_dev)1102{1103 struct ene_device *dev = pnp_get_drvdata(pnp_dev);1104 unsigned long flags;1105 1106 rc_unregister_device(dev->rdev);1107 del_timer_sync(&dev->tx_sim_timer);1108 spin_lock_irqsave(&dev->hw_lock, flags);1109 ene_rx_disable(dev);1110 ene_rx_restore_hw_buffer(dev);1111 spin_unlock_irqrestore(&dev->hw_lock, flags);1112 1113 free_irq(dev->irq, dev);1114 release_region(dev->hw_io, ENE_IO_SIZE);1115 kfree(dev);1116}1117 1118/* enable wake on IR (wakes on specific button on original remote) */1119static void ene_enable_wake(struct ene_device *dev, bool enable)1120{1121 dbg("wake on IR %s", enable ? "enabled" : "disabled");1122 ene_set_clear_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, enable);1123}1124 1125#ifdef CONFIG_PM1126static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)1127{1128 struct ene_device *dev = pnp_get_drvdata(pnp_dev);1129 bool wake = device_may_wakeup(&dev->pnp_dev->dev);1130 1131 if (!wake && dev->rx_enabled)1132 ene_rx_disable_hw(dev);1133 1134 ene_enable_wake(dev, wake);1135 return 0;1136}1137 1138static int ene_resume(struct pnp_dev *pnp_dev)1139{1140 struct ene_device *dev = pnp_get_drvdata(pnp_dev);1141 ene_setup_hw_settings(dev);1142 1143 if (dev->rx_enabled)1144 ene_rx_enable(dev);1145 1146 ene_enable_wake(dev, false);1147 return 0;1148}1149#endif1150 1151static void ene_shutdown(struct pnp_dev *pnp_dev)1152{1153 struct ene_device *dev = pnp_get_drvdata(pnp_dev);1154 ene_enable_wake(dev, true);1155}1156 1157static const struct pnp_device_id ene_ids[] = {1158 {.id = "ENE0100",},1159 {.id = "ENE0200",},1160 {.id = "ENE0201",},1161 {.id = "ENE0202",},1162 {},1163};1164 1165static struct pnp_driver ene_driver = {1166 .name = ENE_DRIVER_NAME,1167 .id_table = ene_ids,1168 .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,1169 1170 .probe = ene_probe,1171 .remove = ene_remove,1172#ifdef CONFIG_PM1173 .suspend = ene_suspend,1174 .resume = ene_resume,1175#endif1176 .shutdown = ene_shutdown,1177};1178 1179module_param(sample_period, int, S_IRUGO);1180MODULE_PARM_DESC(sample_period, "Hardware sample period (50 us default)");1181 1182module_param(learning_mode_force, bool, S_IRUGO);1183MODULE_PARM_DESC(learning_mode_force, "Enable learning mode by default");1184 1185module_param(debug, int, S_IRUGO | S_IWUSR);1186MODULE_PARM_DESC(debug, "Debug level");1187 1188module_param(txsim, bool, S_IRUGO);1189MODULE_PARM_DESC(txsim,1190 "Simulate TX features on unsupported hardware (dangerous)");1191 1192MODULE_DEVICE_TABLE(pnp, ene_ids);1193MODULE_DESCRIPTION1194 ("Infrared input driver for KB3926B/C/D/E/F (aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port");1195 1196MODULE_AUTHOR("Maxim Levitsky");1197MODULE_LICENSE("GPL");1198 1199module_pnp_driver(ene_driver);1200