brintos

brintos / linux-shallow public Read only

0
0
Text · 11.7 KiB · 016d0d5 Raw
474 lines · c
1// SPDX-License-Identifier: GPL-2.02// For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview3// I2C address is always 0xC0.4//5// Copyright (c) 2005 Mauro Carvalho Chehab <mchehab@kernel.org>6//7// tea5767 autodetection thanks to Torsten Seeboth and Atsushi Nakagawa8// from their contributions on DScaler.9 10#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt11 12#include <linux/i2c.h>13#include <linux/slab.h>14#include <linux/delay.h>15#include <linux/videodev2.h>16#include "tuner-i2c.h"17#include "tea5767.h"18 19static int debug;20module_param(debug, int, 0644);21MODULE_PARM_DESC(debug, "enable verbose debug messages");22 23/*****************************************************************************/24 25struct tea5767_priv {26	struct tuner_i2c_props	i2c_props;27	u32			frequency;28	struct tea5767_ctrl	ctrl;29};30 31/*****************************************************************************/32 33/******************************34 * Write mode register values *35 ******************************/36 37/* First register */38#define TEA5767_MUTE		0x80	/* Mutes output */39#define TEA5767_SEARCH		0x40	/* Activates station search */40/* Bits 0-5 for divider MSB */41 42/* Second register */43/* Bits 0-7 for divider LSB */44 45/* Third register */46 47/* Station search from botton to up */48#define TEA5767_SEARCH_UP	0x8049 50/* Searches with ADC output = 10 */51#define TEA5767_SRCH_HIGH_LVL	0x6052 53/* Searches with ADC output = 10 */54#define TEA5767_SRCH_MID_LVL	0x4055 56/* Searches with ADC output = 5 */57#define TEA5767_SRCH_LOW_LVL	0x2058 59/* if on, div=4*(Frf+Fif)/Fref otherwise, div=4*(Frf-Fif)/Freq) */60#define TEA5767_HIGH_LO_INJECT	0x1061 62/* Disable stereo */63#define TEA5767_MONO		0x0864 65/* Disable right channel and turns to mono */66#define TEA5767_MUTE_RIGHT	0x0467 68/* Disable left channel and turns to mono */69#define TEA5767_MUTE_LEFT	0x0270 71#define TEA5767_PORT1_HIGH	0x0172 73/* Fourth register */74#define TEA5767_PORT2_HIGH	0x8075/* Chips stops working. Only I2C bus remains on */76#define TEA5767_STDBY		0x4077 78/* Japan freq (76-108 MHz. If disabled, 87.5-108 MHz */79#define TEA5767_JAPAN_BAND	0x2080 81/* Unselected means 32.768 KHz freq as reference. Otherwise Xtal at 13 MHz */82#define TEA5767_XTAL_32768	0x1083 84/* Cuts weak signals */85#define TEA5767_SOFT_MUTE	0x0886 87/* Activates high cut control */88#define TEA5767_HIGH_CUT_CTRL	0x0489 90/* Activates stereo noise control */91#define TEA5767_ST_NOISE_CTL	0x0292 93/* If activate PORT 1 indicates SEARCH or else it is used as PORT1 */94#define TEA5767_SRCH_IND	0x0195 96/* Fifth register */97 98/* By activating, it will use Xtal at 13 MHz as reference for divider */99#define TEA5767_PLLREF_ENABLE	0x80100 101/* By activating, deemphasis=50, or else, deemphasis of 50us */102#define TEA5767_DEEMPH_75	0X40103 104/*****************************105 * Read mode register values *106 *****************************/107 108/* First register */109#define TEA5767_READY_FLAG_MASK	0x80110#define TEA5767_BAND_LIMIT_MASK	0X40111/* Bits 0-5 for divider MSB after search or preset */112 113/* Second register */114/* Bits 0-7 for divider LSB after search or preset */115 116/* Third register */117#define TEA5767_STEREO_MASK	0x80118#define TEA5767_IF_CNTR_MASK	0x7f119 120/* Fourth register */121#define TEA5767_ADC_LEVEL_MASK	0xf0122 123/* should be 0 */124#define TEA5767_CHIP_ID_MASK	0x0f125 126/* Fifth register */127/* Reserved for future extensions */128#define TEA5767_RESERVED_MASK	0xff129 130/*****************************************************************************/131 132static void tea5767_status_dump(struct tea5767_priv *priv,133				unsigned char *buffer)134{135	unsigned int div, frq;136 137	if (TEA5767_READY_FLAG_MASK & buffer[0])138		tuner_info("Ready Flag ON\n");139	else140		tuner_info("Ready Flag OFF\n");141 142	if (TEA5767_BAND_LIMIT_MASK & buffer[0])143		tuner_info("Tuner at band limit\n");144	else145		tuner_info("Tuner not at band limit\n");146 147	div = ((buffer[0] & 0x3f) << 8) | buffer[1];148 149	switch (priv->ctrl.xtal_freq) {150	case TEA5767_HIGH_LO_13MHz:151		frq = (div * 50000 - 700000 - 225000) / 4;	/* Freq in KHz */152		break;153	case TEA5767_LOW_LO_13MHz:154		frq = (div * 50000 + 700000 + 225000) / 4;	/* Freq in KHz */155		break;156	case TEA5767_LOW_LO_32768:157		frq = (div * 32768 + 700000 + 225000) / 4;	/* Freq in KHz */158		break;159	case TEA5767_HIGH_LO_32768:160	default:161		frq = (div * 32768 - 700000 - 225000) / 4;	/* Freq in KHz */162		break;163	}164	buffer[0] = (div >> 8) & 0x3f;165	buffer[1] = div & 0xff;166 167	tuner_info("Frequency %d.%03d KHz (divider = 0x%04x)\n",168		   frq / 1000, frq % 1000, div);169 170	if (TEA5767_STEREO_MASK & buffer[2])171		tuner_info("Stereo\n");172	else173		tuner_info("Mono\n");174 175	tuner_info("IF Counter = %d\n", buffer[2] & TEA5767_IF_CNTR_MASK);176 177	tuner_info("ADC Level = %d\n",178		   (buffer[3] & TEA5767_ADC_LEVEL_MASK) >> 4);179 180	tuner_info("Chip ID = %d\n", (buffer[3] & TEA5767_CHIP_ID_MASK));181 182	tuner_info("Reserved = 0x%02x\n",183		   (buffer[4] & TEA5767_RESERVED_MASK));184}185 186/* Freq should be specifyed at 62.5 Hz */187static int set_radio_freq(struct dvb_frontend *fe,188			  struct analog_parameters *params)189{190	struct tea5767_priv *priv = fe->tuner_priv;191	unsigned int frq = params->frequency;192	unsigned char buffer[5];193	unsigned div;194	int rc;195 196	tuner_dbg("radio freq = %d.%03d MHz\n", frq/16000,(frq/16)%1000);197 198	buffer[2] = 0;199 200	if (priv->ctrl.port1)201		buffer[2] |= TEA5767_PORT1_HIGH;202 203	if (params->audmode == V4L2_TUNER_MODE_MONO) {204		tuner_dbg("TEA5767 set to mono\n");205		buffer[2] |= TEA5767_MONO;206	} else {207		tuner_dbg("TEA5767 set to stereo\n");208	}209 210 211	buffer[3] = 0;212 213	if (priv->ctrl.port2)214		buffer[3] |= TEA5767_PORT2_HIGH;215 216	if (priv->ctrl.high_cut)217		buffer[3] |= TEA5767_HIGH_CUT_CTRL;218 219	if (priv->ctrl.st_noise)220		buffer[3] |= TEA5767_ST_NOISE_CTL;221 222	if (priv->ctrl.soft_mute)223		buffer[3] |= TEA5767_SOFT_MUTE;224 225	if (priv->ctrl.japan_band)226		buffer[3] |= TEA5767_JAPAN_BAND;227 228	buffer[4] = 0;229 230	if (priv->ctrl.deemph_75)231		buffer[4] |= TEA5767_DEEMPH_75;232 233	if (priv->ctrl.pllref)234		buffer[4] |= TEA5767_PLLREF_ENABLE;235 236 237	/* Rounds freq to next decimal value - for 62.5 KHz step */238	/* frq = 20*(frq/16)+radio_frq[frq%16]; */239 240	switch (priv->ctrl.xtal_freq) {241	case TEA5767_HIGH_LO_13MHz:242		tuner_dbg("radio HIGH LO inject xtal @ 13 MHz\n");243		buffer[2] |= TEA5767_HIGH_LO_INJECT;244		div = (frq * (4000 / 16) + 700000 + 225000 + 25000) / 50000;245		break;246	case TEA5767_LOW_LO_13MHz:247		tuner_dbg("radio LOW LO inject xtal @ 13 MHz\n");248 249		div = (frq * (4000 / 16) - 700000 - 225000 + 25000) / 50000;250		break;251	case TEA5767_LOW_LO_32768:252		tuner_dbg("radio LOW LO inject xtal @ 32,768 MHz\n");253		buffer[3] |= TEA5767_XTAL_32768;254		/* const 700=4000*175 Khz - to adjust freq to right value */255		div = ((frq * (4000 / 16) - 700000 - 225000) + 16384) >> 15;256		break;257	case TEA5767_HIGH_LO_32768:258	default:259		tuner_dbg("radio HIGH LO inject xtal @ 32,768 MHz\n");260 261		buffer[2] |= TEA5767_HIGH_LO_INJECT;262		buffer[3] |= TEA5767_XTAL_32768;263		div = ((frq * (4000 / 16) + 700000 + 225000) + 16384) >> 15;264		break;265	}266	buffer[0] = (div >> 8) & 0x3f;267	buffer[1] = div & 0xff;268 269	if (5 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 5)))270		tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);271 272	if (debug) {273		if (5 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 5)))274			tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);275		else276			tea5767_status_dump(priv, buffer);277	}278 279	priv->frequency = frq * 125 / 2;280 281	return 0;282}283 284static int tea5767_read_status(struct dvb_frontend *fe, char *buffer)285{286	struct tea5767_priv *priv = fe->tuner_priv;287	int rc;288 289	memset(buffer, 0, 5);290	if (5 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 5))) {291		tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);292		return -EREMOTEIO;293	}294 295	return 0;296}297 298static inline int tea5767_signal(struct dvb_frontend *fe, const char *buffer)299{300	struct tea5767_priv *priv = fe->tuner_priv;301 302	int signal = ((buffer[3] & TEA5767_ADC_LEVEL_MASK) << 8);303 304	tuner_dbg("Signal strength: %d\n", signal);305 306	return signal;307}308 309static inline int tea5767_stereo(struct dvb_frontend *fe, const char *buffer)310{311	struct tea5767_priv *priv = fe->tuner_priv;312 313	int stereo = buffer[2] & TEA5767_STEREO_MASK;314 315	tuner_dbg("Radio ST GET = %02x\n", stereo);316 317	return (stereo ? V4L2_TUNER_SUB_STEREO : 0);318}319 320static int tea5767_get_status(struct dvb_frontend *fe, u32 *status)321{322	unsigned char buffer[5];323 324	*status = 0;325 326	if (0 == tea5767_read_status(fe, buffer)) {327		if (tea5767_signal(fe, buffer))328			*status = TUNER_STATUS_LOCKED;329		if (tea5767_stereo(fe, buffer))330			*status |= TUNER_STATUS_STEREO;331	}332 333	return 0;334}335 336static int tea5767_get_rf_strength(struct dvb_frontend *fe, u16 *strength)337{338	unsigned char buffer[5];339 340	*strength = 0;341 342	if (0 == tea5767_read_status(fe, buffer))343		*strength = tea5767_signal(fe, buffer);344 345	return 0;346}347 348static int tea5767_standby(struct dvb_frontend *fe)349{350	unsigned char buffer[5];351	struct tea5767_priv *priv = fe->tuner_priv;352	unsigned div, rc;353 354	div = (87500 * 4 + 700 + 225 + 25) / 50; /* Set frequency to 87.5 MHz */355	buffer[0] = (div >> 8) & 0x3f;356	buffer[1] = div & 0xff;357	buffer[2] = TEA5767_PORT1_HIGH;358	buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL |359		    TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND | TEA5767_STDBY;360	buffer[4] = 0;361 362	if (5 != (rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 5)))363		tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);364 365	return 0;366}367 368int tea5767_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr)369{370	struct tuner_i2c_props i2c = { .adap = i2c_adap, .addr = i2c_addr };371	unsigned char buffer[7] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };372 373	int rc;374 375	if ((rc = tuner_i2c_xfer_recv(&i2c, buffer, 7))< 5) {376		pr_warn("It is not a TEA5767. Received %i bytes.\n", rc);377		return -EINVAL;378	}379 380	/* If all bytes are the same then it's a TV tuner and not a tea5767 */381	if (buffer[0] == buffer[1] && buffer[0] == buffer[2] &&382	    buffer[0] == buffer[3] && buffer[0] == buffer[4]) {383		pr_warn("All bytes are equal. It is not a TEA5767\n");384		return -EINVAL;385	}386 387	/*  Status bytes:388	 *  Byte 4: bit 3:1 : CI (Chip Identification) == 0389	 *          bit 0   : internally set to 0390	 *  Byte 5: bit 7:0 : == 0391	 */392	if (((buffer[3] & 0x0f) != 0x00) || (buffer[4] != 0x00)) {393		pr_warn("Chip ID is not zero. It is not a TEA5767\n");394		return -EINVAL;395	}396 397 398	return 0;399}400 401static void tea5767_release(struct dvb_frontend *fe)402{403	kfree(fe->tuner_priv);404	fe->tuner_priv = NULL;405}406 407static int tea5767_get_frequency(struct dvb_frontend *fe, u32 *frequency)408{409	struct tea5767_priv *priv = fe->tuner_priv;410	*frequency = priv->frequency;411 412	return 0;413}414 415static int tea5767_set_config (struct dvb_frontend *fe, void *priv_cfg)416{417	struct tea5767_priv *priv = fe->tuner_priv;418 419	memcpy(&priv->ctrl, priv_cfg, sizeof(priv->ctrl));420 421	return 0;422}423 424static const struct dvb_tuner_ops tea5767_tuner_ops = {425	.info = {426		.name           = "tea5767", // Philips TEA5767HN FM Radio427	},428 429	.set_analog_params = set_radio_freq,430	.set_config	   = tea5767_set_config,431	.sleep             = tea5767_standby,432	.release           = tea5767_release,433	.get_frequency     = tea5767_get_frequency,434	.get_status        = tea5767_get_status,435	.get_rf_strength   = tea5767_get_rf_strength,436};437 438struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe,439				    struct i2c_adapter* i2c_adap,440				    u8 i2c_addr)441{442	struct tea5767_priv *priv = NULL;443 444	priv = kzalloc(sizeof(struct tea5767_priv), GFP_KERNEL);445	if (priv == NULL)446		return NULL;447	fe->tuner_priv = priv;448 449	priv->i2c_props.addr  = i2c_addr;450	priv->i2c_props.adap  = i2c_adap;451	priv->i2c_props.name  = "tea5767";452 453	priv->ctrl.xtal_freq  = TEA5767_HIGH_LO_32768;454	priv->ctrl.port1      = 1;455	priv->ctrl.port2      = 1;456	priv->ctrl.high_cut   = 1;457	priv->ctrl.st_noise   = 1;458	priv->ctrl.japan_band = 1;459 460	memcpy(&fe->ops.tuner_ops, &tea5767_tuner_ops,461	       sizeof(struct dvb_tuner_ops));462 463	tuner_info("type set to %s\n", "Philips TEA5767HN FM Radio");464 465	return fe;466}467 468EXPORT_SYMBOL_GPL(tea5767_attach);469EXPORT_SYMBOL_GPL(tea5767_autodetection);470 471MODULE_DESCRIPTION("Philips TEA5767 FM tuner driver");472MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@kernel.org>");473MODULE_LICENSE("GPL v2");474