382 lines · c
1/* SPDX-License-Identifier: GPL-2.0-only */2/*3 *4 * Copyright (C) 2005 Mike Isely <isely@pobox.com>5 */6#ifndef __PVRUSB2_HDW_INTERNAL_H7#define __PVRUSB2_HDW_INTERNAL_H8 9/*10 11 This header sets up all the internal structures and definitions needed to12 track and coordinate the driver's interaction with the hardware. ONLY13 source files which actually implement part of that whole circus should be14 including this header. Higher levels, like the external layers to the15 various public APIs (V4L, sysfs, etc) should NOT ever include this16 private, internal header. This means that pvrusb2-hdw, pvrusb2-encoder,17 etc will include this, but pvrusb2-v4l should not.18 19*/20 21#include <linux/videodev2.h>22#include <linux/i2c.h>23#include <linux/workqueue.h>24#include <linux/mutex.h>25#include "pvrusb2-hdw.h"26#include "pvrusb2-io.h"27#include <media/v4l2-device.h>28#include <media/drv-intf/cx2341x.h>29#include <media/i2c/ir-kbd-i2c.h>30#include "pvrusb2-devattr.h"31 32/* Legal values for PVR2_CID_HSM */33#define PVR2_CVAL_HSM_FAIL 034#define PVR2_CVAL_HSM_FULL 135#define PVR2_CVAL_HSM_HIGH 236 37#define PVR2_VID_ENDPOINT 0x8438#define PVR2_UNK_ENDPOINT 0x86 /* maybe raw yuv ? */39#define PVR2_VBI_ENDPOINT 0x8840 41#define PVR2_CTL_BUFFSIZE 6442 43#define FREQTABLE_SIZE 50044 45#define LOCK_TAKE(x) do { mutex_lock(&x##_mutex); x##_held = !0; } while (0)46#define LOCK_GIVE(x) do { x##_held = 0; mutex_unlock(&x##_mutex); } while (0)47 48typedef int (*pvr2_ctlf_is_dirty)(struct pvr2_ctrl *);49typedef void (*pvr2_ctlf_clear_dirty)(struct pvr2_ctrl *);50typedef int (*pvr2_ctlf_check_value)(struct pvr2_ctrl *,int);51typedef int (*pvr2_ctlf_get_value)(struct pvr2_ctrl *,int *);52typedef int (*pvr2_ctlf_set_value)(struct pvr2_ctrl *,int msk,int val);53typedef int (*pvr2_ctlf_val_to_sym)(struct pvr2_ctrl *,int msk,int val,54 char *,unsigned int,unsigned int *);55typedef int (*pvr2_ctlf_sym_to_val)(struct pvr2_ctrl *,56 const char *,unsigned int,57 int *mskp,int *valp);58typedef unsigned int (*pvr2_ctlf_get_v4lflags)(struct pvr2_ctrl *);59 60/* This structure describes a specific control. A table of these is set up61 in pvrusb2-hdw.c. */62struct pvr2_ctl_info {63 /* Control's name suitable for use as an identifier */64 const char *name;65 66 /* Short description of control */67 const char *desc;68 69 /* Control's implementation */70 pvr2_ctlf_get_value get_value; /* Get its value */71 pvr2_ctlf_get_value get_def_value; /* Get its default value */72 pvr2_ctlf_get_value get_min_value; /* Get minimum allowed value */73 pvr2_ctlf_get_value get_max_value; /* Get maximum allowed value */74 pvr2_ctlf_set_value set_value; /* Set its value */75 pvr2_ctlf_check_value check_value; /* Check that value is valid */76 pvr2_ctlf_val_to_sym val_to_sym; /* Custom convert value->symbol */77 pvr2_ctlf_sym_to_val sym_to_val; /* Custom convert symbol->value */78 pvr2_ctlf_is_dirty is_dirty; /* Return true if dirty */79 pvr2_ctlf_clear_dirty clear_dirty; /* Clear dirty state */80 pvr2_ctlf_get_v4lflags get_v4lflags;/* Retrieve v4l flags */81 82 /* Control's type (int, enum, bitmask) */83 enum pvr2_ctl_type type;84 85 /* Associated V4L control ID, if any */86 int v4l_id;87 88 /* Associated driver internal ID, if any */89 int internal_id;90 91 /* Don't implicitly initialize this control's value */92 int skip_init;93 94 /* Starting value for this control */95 int default_value;96 97 /* Type-specific control information */98 union {99 struct { /* Integer control */100 long min_value; /* lower limit */101 long max_value; /* upper limit */102 } type_int;103 struct { /* enumerated control */104 unsigned int count; /* enum value count */105 const char * const *value_names; /* symbol names */106 } type_enum;107 struct { /* bitmask control */108 unsigned int valid_bits; /* bits in use */109 const char **bit_names; /* symbol name/bit */110 } type_bitmask;111 } def;112};113 114 115/* Same as pvr2_ctl_info, but includes storage for the control description */116#define PVR2_CTLD_INFO_DESC_SIZE 32117struct pvr2_ctld_info {118 struct pvr2_ctl_info info;119 char desc[PVR2_CTLD_INFO_DESC_SIZE];120};121 122struct pvr2_ctrl {123 const struct pvr2_ctl_info *info;124 struct pvr2_hdw *hdw;125};126 127 128 129/* Disposition of firmware1 loading situation */130#define FW1_STATE_UNKNOWN 0131#define FW1_STATE_MISSING 1132#define FW1_STATE_FAILED 2133#define FW1_STATE_RELOAD 3134#define FW1_STATE_OK 4135 136/* What state the device is in if it is a hybrid */137#define PVR2_PATHWAY_UNKNOWN 0138#define PVR2_PATHWAY_ANALOG 1139#define PVR2_PATHWAY_DIGITAL 2140 141typedef int (*pvr2_i2c_func)(struct pvr2_hdw *,u8,u8 *,u16,u8 *, u16);142#define PVR2_I2C_FUNC_CNT 128143 144/* This structure contains all state data directly needed to145 manipulate the hardware (as opposed to complying with a kernel146 interface) */147struct pvr2_hdw {148 /* Underlying USB device handle */149 struct usb_device *usb_dev;150 struct usb_interface *usb_intf;151 152 /* Our handle into the v4l2 sub-device architecture */153 struct v4l2_device v4l2_dev;154 /* Device description, anything that must adjust behavior based on155 device specific info will use information held here. */156 const struct pvr2_device_desc *hdw_desc;157 158 /* Kernel worker thread handling */159 struct work_struct workpoll; /* Update driver state */160 161 /* Video spigot */162 struct pvr2_stream *vid_stream;163 164 /* Mutex for all hardware state control */165 struct mutex big_lock_mutex;166 int big_lock_held; /* For debugging */167 168 /* This is a simple string which identifies the instance of this169 driver. It is unique within the set of existing devices, but170 there is no attempt to keep the name consistent with the same171 physical device each time. */172 char name[32];173 174 /* This is a simple string which identifies the physical device175 instance itself - if possible. (If not possible, then it is176 based on the specific driver instance, similar to name above.)177 The idea here is that userspace might hopefully be able to use178 this recognize specific tuners. It will encode a serial number,179 if available. */180 char identifier[32];181 182 /* I2C stuff */183 struct i2c_adapter i2c_adap;184 struct i2c_algorithm i2c_algo;185 pvr2_i2c_func i2c_func[PVR2_I2C_FUNC_CNT];186 int i2c_cx25840_hack_state;187 int i2c_linked;188 189 /* IR related */190 unsigned int ir_scheme_active; /* IR scheme as seen from the outside */191 struct IR_i2c_init_data ir_init_data; /* params passed to IR modules */192 193 /* Frequency table */194 unsigned int freqTable[FREQTABLE_SIZE];195 unsigned int freqProgSlot;196 197 /* Stuff for handling low level control interaction with device */198 struct mutex ctl_lock_mutex;199 int ctl_lock_held; /* For debugging */200 struct urb *ctl_write_urb;201 struct urb *ctl_read_urb;202 unsigned char *ctl_write_buffer;203 unsigned char *ctl_read_buffer;204 int ctl_write_pend_flag;205 int ctl_read_pend_flag;206 int ctl_timeout_flag;207 struct completion ctl_done;208 unsigned char cmd_buffer[PVR2_CTL_BUFFSIZE];209 int cmd_debug_state; // Low level command debugging info210 unsigned char cmd_debug_code; //211 unsigned int cmd_debug_write_len; //212 unsigned int cmd_debug_read_len; //213 214 /* Bits of state that describe what is going on with various parts215 of the driver. */216 int state_pathway_ok; /* Pathway config is ok */217 int state_encoder_ok; /* Encoder is operational */218 int state_encoder_run; /* Encoder is running */219 int state_encoder_config; /* Encoder is configured */220 int state_encoder_waitok; /* Encoder pre-wait done */221 int state_encoder_runok; /* Encoder has run for >= .25 sec */222 int state_decoder_run; /* Decoder is running */223 int state_decoder_ready; /* Decoder is stabilized & streamable */224 int state_usbstream_run; /* FX2 is streaming */225 int state_decoder_quiescent; /* Decoder idle for minimal interval */226 int state_pipeline_config; /* Pipeline is configured */227 int state_pipeline_req; /* Somebody wants to stream */228 int state_pipeline_pause; /* Pipeline must be paused */229 int state_pipeline_idle; /* Pipeline not running */230 231 /* This is the master state of the driver. It is the combined232 result of other bits of state. Examining this will indicate the233 overall state of the driver. Values here are one of234 PVR2_STATE_xxxx */235 unsigned int master_state;236 237 /* True if device led is currently on */238 int led_on;239 240 /* True if states must be re-evaluated */241 int state_stale;242 243 void (*state_func)(void *);244 void *state_data;245 246 /* Timer for measuring required decoder settling time before we're247 allowed to fire it up again. */248 struct timer_list quiescent_timer;249 250 /* Timer for measuring decoder stabilization time, which is the251 amount of time we need to let the decoder run before we can252 trust its output (otherwise the encoder might see garbage and253 then fail to start correctly). */254 struct timer_list decoder_stabilization_timer;255 256 /* Timer for measuring encoder pre-wait time */257 struct timer_list encoder_wait_timer;258 259 /* Timer for measuring encoder minimum run time */260 struct timer_list encoder_run_timer;261 262 /* Place to block while waiting for state changes */263 wait_queue_head_t state_wait_data;264 265 266 int force_dirty; /* consider all controls dirty if true */267 int flag_ok; /* device in known good state */268 int flag_modulefail; /* true if at least one module failed to load */269 int flag_disconnected; /* flag_ok == 0 due to disconnect */270 int flag_init_ok; /* true if structure is fully initialized */271 int fw1_state; /* current situation with fw1 */272 int pathway_state; /* one of PVR2_PATHWAY_xxx */273 int flag_decoder_missed;/* We've noticed missing decoder */274 int flag_tripped; /* Indicates overall failure to start */275 276 unsigned int decoder_client_id;277 278 // CPU firmware info (used to help find / save firmware data)279 char *fw_buffer;280 unsigned int fw_size;281 int fw_cpu_flag; /* True if we are dealing with the CPU */282 283 /* Tuner / frequency control stuff */284 unsigned int tuner_type;285 int tuner_updated;286 unsigned int freqValTelevision; /* Current freq for tv mode */287 unsigned int freqValRadio; /* Current freq for radio mode */288 unsigned int freqSlotTelevision; /* Current slot for tv mode */289 unsigned int freqSlotRadio; /* Current slot for radio mode */290 unsigned int freqSelector; /* 0=radio 1=television */291 int freqDirty;292 293 /* Current tuner info - this information is polled from the I2C bus */294 struct v4l2_tuner tuner_signal_info;295 int tuner_signal_stale;296 297 /* Cropping capability info */298 struct v4l2_cropcap cropcap_info;299 int cropcap_stale;300 301 /* Video standard handling */302 v4l2_std_id std_mask_eeprom; // Hardware supported selections303 v4l2_std_id std_mask_avail; // Which standards we may select from304 v4l2_std_id std_mask_cur; // Currently selected standard(s)305 int std_enum_cur; // selected standard enumeration value306 int std_dirty; // True if std_mask_cur has changed307 struct pvr2_ctl_info std_info_enum;308 struct pvr2_ctl_info std_info_avail;309 struct pvr2_ctl_info std_info_cur;310 struct pvr2_ctl_info std_info_detect;311 312 // Generated string names, one per actual V4L2 standard313 const char *std_mask_ptrs[32];314 char std_mask_names[32][16];315 316 int unit_number; /* ID for driver instance */317 unsigned long serial_number; /* ID for hardware itself */318 319 char bus_info[32]; /* Bus location info */320 321 /* Minor numbers used by v4l logic (yes, this is a hack, as there322 should be no v4l junk here). Probably a better way to do this. */323 int v4l_minor_number_video;324 int v4l_minor_number_vbi;325 int v4l_minor_number_radio;326 327 /* Bit mask of PVR2_CVAL_INPUT choices which are valid for the hardware */328 unsigned int input_avail_mask;329 /* Bit mask of PVR2_CVAL_INPUT choices which are currently allowed */330 unsigned int input_allowed_mask;331 332 /* Location of eeprom or a negative number if none */333 int eeprom_addr;334 335 enum pvr2_config active_stream_type;336 enum pvr2_config desired_stream_type;337 338 /* Control state needed for cx2341x module */339 struct cx2341x_mpeg_params enc_cur_state;340 struct cx2341x_mpeg_params enc_ctl_state;341 /* True if an encoder attribute has changed */342 int enc_stale;343 /* True if an unsafe encoder attribute has changed */344 int enc_unsafe_stale;345 /* True if enc_cur_state is valid */346 int enc_cur_valid;347 348 /* Control state */349#define VCREATE_DATA(lab) int lab##_val; int lab##_dirty350 VCREATE_DATA(brightness);351 VCREATE_DATA(contrast);352 VCREATE_DATA(saturation);353 VCREATE_DATA(hue);354 VCREATE_DATA(volume);355 VCREATE_DATA(balance);356 VCREATE_DATA(bass);357 VCREATE_DATA(treble);358 VCREATE_DATA(mute);359 VCREATE_DATA(cropl);360 VCREATE_DATA(cropt);361 VCREATE_DATA(cropw);362 VCREATE_DATA(croph);363 VCREATE_DATA(input);364 VCREATE_DATA(audiomode);365 VCREATE_DATA(res_hor);366 VCREATE_DATA(res_ver);367 VCREATE_DATA(srate);368#undef VCREATE_DATA369 370 struct pvr2_ctld_info *mpeg_ctrl_info;371 372 struct pvr2_ctrl *controls;373 unsigned int control_cnt;374};375 376/* This function gets the current frequency */377unsigned long pvr2_hdw_get_cur_freq(struct pvr2_hdw *);378 379void pvr2_hdw_status_poll(struct pvr2_hdw *);380 381#endif /* __PVRUSB2_HDW_INTERNAL_H */382