brintos

brintos / linux-shallow public Read only

0
0
Text · 8.5 KiB · 2a58410 Raw
379 lines · c
1// SPDX-License-Identifier: GPL-2.02/*3 * Copyright (c) 2013-2020, Intel Corporation. All rights reserved.4 * Intel Management Engine Interface (Intel MEI) Linux driver5 */6 7#include <linux/module.h>8#include <linux/kernel.h>9#include <linux/device.h>10#include <linux/errno.h>11#include <linux/types.h>12#include <linux/pci.h>13#include <linux/init.h>14#include <linux/sched.h>15#include <linux/interrupt.h>16#include <linux/workqueue.h>17#include <linux/pm_domain.h>18#include <linux/pm_runtime.h>19 20#include <linux/mei.h>21 22 23#include "mei_dev.h"24#include "hw-txe.h"25 26static const struct pci_device_id mei_txe_pci_tbl[] = {27	{PCI_VDEVICE(INTEL, 0x0F18)}, /* Baytrail */28	{PCI_VDEVICE(INTEL, 0x2298)}, /* Cherrytrail */29 30	{0, }31};32MODULE_DEVICE_TABLE(pci, mei_txe_pci_tbl);33 34#ifdef CONFIG_PM35static inline void mei_txe_set_pm_domain(struct mei_device *dev);36static inline void mei_txe_unset_pm_domain(struct mei_device *dev);37#else38static inline void mei_txe_set_pm_domain(struct mei_device *dev) {}39static inline void mei_txe_unset_pm_domain(struct mei_device *dev) {}40#endif /* CONFIG_PM */41 42/**43 * mei_txe_probe - Device Initialization Routine44 *45 * @pdev: PCI device structure46 * @ent: entry in mei_txe_pci_tbl47 *48 * Return: 0 on success, <0 on failure.49 */50static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)51{52	struct mei_device *dev;53	struct mei_txe_hw *hw;54	const int mask = BIT(SEC_BAR) | BIT(BRIDGE_BAR);55	int err;56 57	/* enable pci dev */58	err = pcim_enable_device(pdev);59	if (err) {60		dev_err(&pdev->dev, "failed to enable pci device.\n");61		goto end;62	}63	/* set PCI host mastering  */64	pci_set_master(pdev);65	/* pci request regions and mapping IO device memory for mei driver */66	err = pcim_iomap_regions(pdev, mask, KBUILD_MODNAME);67	if (err) {68		dev_err(&pdev->dev, "failed to get pci regions.\n");69		goto end;70	}71 72	err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(36));73	if (err) {74		err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));75		if (err) {76			dev_err(&pdev->dev, "No suitable DMA available.\n");77			goto end;78		}79	}80 81	/* allocates and initializes the mei dev structure */82	dev = mei_txe_dev_init(pdev);83	if (!dev) {84		err = -ENOMEM;85		goto end;86	}87	hw = to_txe_hw(dev);88	hw->mem_addr = pcim_iomap_table(pdev);89 90	pci_enable_msi(pdev);91 92	/* clear spurious interrupts */93	mei_clear_interrupts(dev);94 95	/* request and enable interrupt  */96	if (pci_dev_msi_enabled(pdev))97		err = request_threaded_irq(pdev->irq,98			NULL,99			mei_txe_irq_thread_handler,100			IRQF_ONESHOT, KBUILD_MODNAME, dev);101	else102		err = request_threaded_irq(pdev->irq,103			mei_txe_irq_quick_handler,104			mei_txe_irq_thread_handler,105			IRQF_SHARED, KBUILD_MODNAME, dev);106	if (err) {107		dev_err(&pdev->dev, "mei: request_threaded_irq failure. irq = %d\n",108			pdev->irq);109		goto end;110	}111 112	if (mei_start(dev)) {113		dev_err(&pdev->dev, "init hw failure.\n");114		err = -ENODEV;115		goto release_irq;116	}117 118	pm_runtime_set_autosuspend_delay(&pdev->dev, MEI_TXI_RPM_TIMEOUT);119	pm_runtime_use_autosuspend(&pdev->dev);120 121	err = mei_register(dev, &pdev->dev);122	if (err)123		goto stop;124 125	pci_set_drvdata(pdev, dev);126 127	/*128	 * MEI requires to resume from runtime suspend mode129	 * in order to perform link reset flow upon system suspend.130	 */131	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);132 133	/*134	 * TXE maps runtime suspend/resume to own power gating states,135	 * hence we need to go around native PCI runtime service which136	 * eventually brings the device into D3cold/hot state.137	 * But the TXE device cannot wake up from D3 unlike from own138	 * power gating. To get around PCI device native runtime pm,139	 * TXE uses runtime pm domain handlers which take precedence.140	 */141	mei_txe_set_pm_domain(dev);142 143	pm_runtime_put_noidle(&pdev->dev);144 145	return 0;146 147stop:148	mei_stop(dev);149release_irq:150	mei_cancel_work(dev);151	mei_disable_interrupts(dev);152	free_irq(pdev->irq, dev);153end:154	dev_err(&pdev->dev, "initialization failed.\n");155	return err;156}157 158/**159 * mei_txe_shutdown- Device Shutdown Routine160 *161 * @pdev: PCI device structure162 *163 *  mei_txe_shutdown is called from the reboot notifier164 *  it's a simplified version of remove so we go down165 *  faster.166 */167static void mei_txe_shutdown(struct pci_dev *pdev)168{169	struct mei_device *dev = pci_get_drvdata(pdev);170 171	dev_dbg(&pdev->dev, "shutdown\n");172	mei_stop(dev);173 174	mei_txe_unset_pm_domain(dev);175 176	mei_disable_interrupts(dev);177	free_irq(pdev->irq, dev);178}179 180/**181 * mei_txe_remove - Device Removal Routine182 *183 * @pdev: PCI device structure184 *185 * mei_remove is called by the PCI subsystem to alert the driver186 * that it should release a PCI device.187 */188static void mei_txe_remove(struct pci_dev *pdev)189{190	struct mei_device *dev = pci_get_drvdata(pdev);191 192	pm_runtime_get_noresume(&pdev->dev);193 194	mei_stop(dev);195 196	mei_txe_unset_pm_domain(dev);197 198	mei_disable_interrupts(dev);199	free_irq(pdev->irq, dev);200 201	mei_deregister(dev);202}203 204 205#ifdef CONFIG_PM_SLEEP206static int mei_txe_pci_suspend(struct device *device)207{208	struct pci_dev *pdev = to_pci_dev(device);209	struct mei_device *dev = pci_get_drvdata(pdev);210 211	dev_dbg(&pdev->dev, "suspend\n");212 213	mei_stop(dev);214 215	mei_disable_interrupts(dev);216 217	free_irq(pdev->irq, dev);218	pci_disable_msi(pdev);219 220	return 0;221}222 223static int mei_txe_pci_resume(struct device *device)224{225	struct pci_dev *pdev = to_pci_dev(device);226	struct mei_device *dev = pci_get_drvdata(pdev);227	int err;228 229	pci_enable_msi(pdev);230 231	mei_clear_interrupts(dev);232 233	/* request and enable interrupt */234	if (pci_dev_msi_enabled(pdev))235		err = request_threaded_irq(pdev->irq,236			NULL,237			mei_txe_irq_thread_handler,238			IRQF_ONESHOT, KBUILD_MODNAME, dev);239	else240		err = request_threaded_irq(pdev->irq,241			mei_txe_irq_quick_handler,242			mei_txe_irq_thread_handler,243			IRQF_SHARED, KBUILD_MODNAME, dev);244	if (err) {245		dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n",246				pdev->irq);247		return err;248	}249 250	err = mei_restart(dev);251 252	return err;253}254#endif /* CONFIG_PM_SLEEP */255 256#ifdef CONFIG_PM257static int mei_txe_pm_runtime_idle(struct device *device)258{259	struct mei_device *dev = dev_get_drvdata(device);260 261	dev_dbg(device, "rpm: txe: runtime_idle\n");262 263	if (mei_write_is_idle(dev))264		pm_runtime_autosuspend(device);265 266	return -EBUSY;267}268static int mei_txe_pm_runtime_suspend(struct device *device)269{270	struct mei_device *dev = dev_get_drvdata(device);271	int ret;272 273	dev_dbg(device, "rpm: txe: runtime suspend\n");274 275	mutex_lock(&dev->device_lock);276 277	if (mei_write_is_idle(dev))278		ret = mei_txe_aliveness_set_sync(dev, 0);279	else280		ret = -EAGAIN;281 282	/* keep irq on we are staying in D0 */283 284	dev_dbg(device, "rpm: txe: runtime suspend ret=%d\n", ret);285 286	mutex_unlock(&dev->device_lock);287 288	if (ret && ret != -EAGAIN)289		schedule_work(&dev->reset_work);290 291	return ret;292}293 294static int mei_txe_pm_runtime_resume(struct device *device)295{296	struct mei_device *dev = dev_get_drvdata(device);297	int ret;298 299	dev_dbg(device, "rpm: txe: runtime resume\n");300 301	mutex_lock(&dev->device_lock);302 303	mei_enable_interrupts(dev);304 305	ret = mei_txe_aliveness_set_sync(dev, 1);306 307	mutex_unlock(&dev->device_lock);308 309	dev_dbg(device, "rpm: txe: runtime resume ret = %d\n", ret);310 311	if (ret)312		schedule_work(&dev->reset_work);313 314	return ret;315}316 317/**318 * mei_txe_set_pm_domain - fill and set pm domain structure for device319 *320 * @dev: mei_device321 */322static inline void mei_txe_set_pm_domain(struct mei_device *dev)323{324	struct pci_dev *pdev  = to_pci_dev(dev->dev);325 326	if (pdev->dev.bus && pdev->dev.bus->pm) {327		dev->pg_domain.ops = *pdev->dev.bus->pm;328 329		dev->pg_domain.ops.runtime_suspend = mei_txe_pm_runtime_suspend;330		dev->pg_domain.ops.runtime_resume = mei_txe_pm_runtime_resume;331		dev->pg_domain.ops.runtime_idle = mei_txe_pm_runtime_idle;332 333		dev_pm_domain_set(&pdev->dev, &dev->pg_domain);334	}335}336 337/**338 * mei_txe_unset_pm_domain - clean pm domain structure for device339 *340 * @dev: mei_device341 */342static inline void mei_txe_unset_pm_domain(struct mei_device *dev)343{344	/* stop using pm callbacks if any */345	dev_pm_domain_set(dev->dev, NULL);346}347 348static const struct dev_pm_ops mei_txe_pm_ops = {349	SET_SYSTEM_SLEEP_PM_OPS(mei_txe_pci_suspend,350				mei_txe_pci_resume)351	SET_RUNTIME_PM_OPS(352		mei_txe_pm_runtime_suspend,353		mei_txe_pm_runtime_resume,354		mei_txe_pm_runtime_idle)355};356 357#define MEI_TXE_PM_OPS	(&mei_txe_pm_ops)358#else359#define MEI_TXE_PM_OPS	NULL360#endif /* CONFIG_PM */361 362/*363 *  PCI driver structure364 */365static struct pci_driver mei_txe_driver = {366	.name = KBUILD_MODNAME,367	.id_table = mei_txe_pci_tbl,368	.probe = mei_txe_probe,369	.remove = mei_txe_remove,370	.shutdown = mei_txe_shutdown,371	.driver.pm = MEI_TXE_PM_OPS,372};373 374module_pci_driver(mei_txe_driver);375 376MODULE_AUTHOR("Intel Corporation");377MODULE_DESCRIPTION("Intel(R) Trusted Execution Environment Interface");378MODULE_LICENSE("GPL v2");379