118 lines · plain
1# SPDX-License-Identifier: GPL-2.0-only2 3menuconfig CAN_SJA10004 tristate "Philips/NXP SJA1000 devices"5 depends on HAS_IOMEM6 7if CAN_SJA10008 9config CAN_EMS_PCI10 tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"11 depends on PCI12 help13 This driver is for the one, two or four channel CPC-PCI,14 CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche15 (http://www.ems-wuensche.de).16 17config CAN_EMS_PCMCIA18 tristate "EMS CPC-CARD Card"19 depends on PCMCIA20 help21 This driver is for the one or two channel CPC-CARD cards from22 EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).23 24config CAN_F8160125 tristate "Fintek F81601 PCIE to 2 CAN Controller"26 depends on PCI27 help28 This driver adds support for Fintek F81601 PCIE to 2 CAN29 Controller. It had internal 24MHz clock source, but it can30 be changed by manufacturer. Use modinfo to get usage for31 parameters. Visit http://www.fintek.com.tw to get more32 information.33 34config CAN_KVASER_PCI35 tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"36 depends on PCI37 help38 This driver is for the PCIcanx and PCIcan cards (1, 2 or39 4 channel) from Kvaser (http://www.kvaser.com).40 41config CAN_PEAK_PCI42 tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"43 depends on PCI44 help45 This driver is for the PCAN-PCI/PCIe/miniPCI cards46 (1, 2, 3 or 4 channels) from PEAK-System Technik47 (http://www.peak-system.com).48 49config CAN_PEAK_PCIEC50 bool "PEAK PCAN-ExpressCard Cards"51 depends on CAN_PEAK_PCI52 select I2C53 select I2C_ALGOBIT54 default y55 help56 Say Y here if you want to use a PCAN-ExpressCard from PEAK-System57 Technik. This will also automatically select I2C and I2C_ALGO58 configuration options.59 60config CAN_PEAK_PCMCIA61 tristate "PEAK PCAN-PC Card"62 depends on PCMCIA63 depends on HAS_IOPORT_MAP64 help65 This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)66 from PEAK-System (http://www.peak-system.com). To compile this67 driver as a module, choose M here: the module will be called68 peak_pcmcia.69 70config CAN_PLX_PCI71 tristate "PLX90xx PCI-bridge based Cards"72 depends on PCI73 help74 This driver is for CAN interface cards based on75 the PLX90xx PCI bridge.76 Driver supports now:77 - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)78 - Adlink PCI-7841/cPCI-7841 SE card79 - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)80 - esd CAN-PCI/PMC/26681 - esd CAN-PCIe/200082 - Marathon CAN-bus-PCI card (http://www.marathon.ru/)83 - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)84 - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/)85 - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)86 - ASEM CAN raw - 2 isolated CAN channels (www.asem.it)87 88config CAN_SJA1000_ISA89 tristate "ISA Bus based legacy SJA1000 driver"90 depends on HAS_IOPORT91 help92 This driver adds legacy support for SJA1000 chips connected to93 the ISA bus using I/O port, memory mapped or indirect access.94 95config CAN_SJA1000_PLATFORM96 tristate "Generic Platform Bus based SJA1000 driver"97 help98 This driver adds support for the SJA1000 chips connected to99 the "platform bus" (Linux abstraction for directly to the100 processor attached devices). Which can be found on various101 boards from Phytec (http://www.phytec.de) like the PCM027,102 PCM038. It also provides the OpenFirmware "platform bus" found103 on embedded systems with OpenFirmware bindings, e.g. if you104 have a PowerPC based system you may want to enable this option.105 106config CAN_TSCAN1107 tristate "TS-CAN1 PC104 boards"108 depends on ISA109 help110 This driver is for Technologic Systems' TSCAN-1 PC104 boards.111 https://www.embeddedts.com/products/TS-CAN1112 The driver supports multiple boards and automatically configures them:113 PLD IO base addresses are read from jumpers JP1 and JP2,114 IRQ numbers are read from jumpers JP4 and JP5,115 SJA1000 IO base addresses are chosen heuristically (first that works).116 117endif118