brintos

brintos / linux-shallow public Read only

0
0
Text · 4.8 KiB · 642e9df Raw
177 lines · c
1/*2	drivers/net/ethernet/dec/tulip/timer.c3 4	Copyright 2000,2001  The Linux Kernel Team5	Written/copyright 1994-2001 by Donald Becker.6 7	This software may be used and distributed according to the terms8	of the GNU General Public License, incorporated herein by reference.9 10	Please submit bugs to http://bugzilla.kernel.org/ .11*/12 13 14#include "tulip.h"15 16 17void tulip_media_task(struct work_struct *work)18{19	struct tulip_private *tp =20		container_of(work, struct tulip_private, media_work);21	struct net_device *dev = tp->dev;22	void __iomem *ioaddr = tp->base_addr;23	u32 csr12 = ioread32(ioaddr + CSR12);24	int next_tick = 2*HZ;25	unsigned long flags;26 27	if (tulip_debug > 2) {28		netdev_dbg(dev, "Media selection tick, %s, status %08x mode %08x SIA %08x %08x %08x %08x\n",29			   medianame[dev->if_port],30			   ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR6),31			   csr12, ioread32(ioaddr + CSR13),32			   ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));33	}34	switch (tp->chip_id) {35	case DC21140:36	case DC21142:37	case MX98713:38	case COMPEX9881:39	case DM910X:40	default: {41		struct medialeaf *mleaf;42		unsigned char *p;43		if (tp->mtable == NULL) {	/* No EEPROM info, use generic code. */44			/* Not much that can be done.45			   Assume this a generic MII or SYM transceiver. */46			next_tick = 60*HZ;47			if (tulip_debug > 2)48				netdev_dbg(dev, "network media monitor CSR6 %08x CSR12 0x%02x\n",49					   ioread32(ioaddr + CSR6),50					   csr12 & 0xff);51			break;52		}53		mleaf = &tp->mtable->mleaf[tp->cur_index];54		p = mleaf->leafdata;55		switch (mleaf->type) {56		case 0: case 4: {57			/* Type 0 serial or 4 SYM transceiver.  Check the link beat bit. */58			int offset = mleaf->type == 4 ? 5 : 2;59			s8 bitnum = p[offset];60			if (p[offset+1] & 0x80) {61				if (tulip_debug > 1)62					netdev_dbg(dev, "Transceiver monitor tick CSR12=%#02x, no media sense\n",63						   csr12);64				if (mleaf->type == 4) {65					if (mleaf->media == 3 && (csr12 & 0x02))66						goto select_next_media;67				}68				break;69			}70			if (tulip_debug > 2)71				netdev_dbg(dev, "Transceiver monitor tick: CSR12=%#02x bit %d is %d, expecting %d\n",72					   csr12, (bitnum >> 1) & 7,73					   (csr12 & (1 << ((bitnum >> 1) & 7))) != 0,74					   (bitnum >= 0));75			/* Check that the specified bit has the proper value. */76			if ((bitnum < 0) !=77				((csr12 & (1 << ((bitnum >> 1) & 7))) != 0)) {78				if (tulip_debug > 2)79					netdev_dbg(dev, "Link beat detected for %s\n",80						   medianame[mleaf->media & MEDIA_MASK]);81				if ((p[2] & 0x61) == 0x01)	/* Bogus Znyx board. */82					goto actually_mii;83				netif_carrier_on(dev);84				break;85			}86			netif_carrier_off(dev);87			if (tp->medialock)88				break;89	  select_next_media:90			if (--tp->cur_index < 0) {91				/* We start again, but should instead look for default. */92				tp->cur_index = tp->mtable->leafcount - 1;93			}94			dev->if_port = tp->mtable->mleaf[tp->cur_index].media;95			if (tulip_media_cap[dev->if_port] & MediaIsFD)96				goto select_next_media; /* Skip FD entries. */97			if (tulip_debug > 1)98				netdev_dbg(dev, "No link beat on media %s, trying transceiver type %s\n",99					   medianame[mleaf->media & MEDIA_MASK],100					   medianame[tp->mtable->mleaf[tp->cur_index].media]);101			tulip_select_media(dev, 0);102			/* Restart the transmit process. */103			tulip_restart_rxtx(tp);104			next_tick = (24*HZ)/10;105			break;106		}107		case 1:  case 3:		/* 21140, 21142 MII */108		actually_mii:109			if (tulip_check_duplex(dev) < 0) {110				netif_carrier_off(dev);111				next_tick = 3*HZ;112			} else {113				netif_carrier_on(dev);114				next_tick = 60*HZ;115			}116			break;117		case 2:					/* 21142 serial block has no link beat. */118		default:119			break;120		}121	}122	break;123	}124 125 126	spin_lock_irqsave(&tp->lock, flags);127	if (tp->timeout_recovery) {128		tulip_tx_timeout_complete(tp, ioaddr);129		tp->timeout_recovery = 0;130	}131	spin_unlock_irqrestore(&tp->lock, flags);132 133	/* mod_timer synchronizes us with potential add_timer calls134	 * from interrupts.135	 */136	mod_timer(&tp->timer, RUN_AT(next_tick));137}138 139 140void mxic_timer(struct timer_list *t)141{142	struct tulip_private *tp = from_timer(tp, t, timer);143	struct net_device *dev = tp->dev;144	void __iomem *ioaddr = tp->base_addr;145	int next_tick = 60*HZ;146 147	if (tulip_debug > 3) {148		dev_info(&dev->dev, "MXIC negotiation status %08x\n",149			 ioread32(ioaddr + CSR12));150	}151	if (next_tick) {152		mod_timer(&tp->timer, RUN_AT(next_tick));153	}154}155 156 157void comet_timer(struct timer_list *t)158{159	struct tulip_private *tp = from_timer(tp, t, timer);160	struct net_device *dev = tp->dev;161	int next_tick = 2*HZ;162 163	if (tulip_debug > 1)164		netdev_dbg(dev, "Comet link status %04x partner capability %04x\n",165			   tulip_mdio_read(dev, tp->phys[0], 1),166			   tulip_mdio_read(dev, tp->phys[0], 5));167	/* mod_timer synchronizes us with potential add_timer calls168	 * from interrupts.169	 */170	if (tulip_check_duplex(dev) < 0)171		{ netif_carrier_off(dev); }172	else173		{ netif_carrier_on(dev); }174	mod_timer(&tp->timer, RUN_AT(next_tick));175}176 177