brintos

brintos / linux-shallow public Read only

0
0
Text · 41.7 KiB · 34ab5ff Raw
1611 lines · c
1// SPDX-License-Identifier: GPL-2.02/* Copyright(c) 2013 - 2019 Intel Corporation. */3 4#include "fm10k.h"5#include <linux/vmalloc.h>6#include <net/udp_tunnel.h>7#include <linux/if_macvlan.h>8 9/**10 * fm10k_setup_tx_resources - allocate Tx resources (Descriptors)11 * @tx_ring:    tx descriptor ring (for a specific queue) to setup12 *13 * Return 0 on success, negative on failure14 **/15int fm10k_setup_tx_resources(struct fm10k_ring *tx_ring)16{17	struct device *dev = tx_ring->dev;18	int size;19 20	size = sizeof(struct fm10k_tx_buffer) * tx_ring->count;21 22	tx_ring->tx_buffer = vzalloc(size);23	if (!tx_ring->tx_buffer)24		goto err;25 26	u64_stats_init(&tx_ring->syncp);27 28	/* round up to nearest 4K */29	tx_ring->size = tx_ring->count * sizeof(struct fm10k_tx_desc);30	tx_ring->size = ALIGN(tx_ring->size, 4096);31 32	tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,33					   &tx_ring->dma, GFP_KERNEL);34	if (!tx_ring->desc)35		goto err;36 37	return 0;38 39err:40	vfree(tx_ring->tx_buffer);41	tx_ring->tx_buffer = NULL;42	return -ENOMEM;43}44 45/**46 * fm10k_setup_all_tx_resources - allocate all queues Tx resources47 * @interface: board private structure48 *49 * If this function returns with an error, then it's possible one or50 * more of the rings is populated (while the rest are not).  It is the51 * callers duty to clean those orphaned rings.52 *53 * Return 0 on success, negative on failure54 **/55static int fm10k_setup_all_tx_resources(struct fm10k_intfc *interface)56{57	int i, err;58 59	for (i = 0; i < interface->num_tx_queues; i++) {60		err = fm10k_setup_tx_resources(interface->tx_ring[i]);61		if (!err)62			continue;63 64		netif_err(interface, probe, interface->netdev,65			  "Allocation for Tx Queue %u failed\n", i);66		goto err_setup_tx;67	}68 69	return 0;70err_setup_tx:71	/* rewind the index freeing the rings as we go */72	while (i--)73		fm10k_free_tx_resources(interface->tx_ring[i]);74	return err;75}76 77/**78 * fm10k_setup_rx_resources - allocate Rx resources (Descriptors)79 * @rx_ring:    rx descriptor ring (for a specific queue) to setup80 *81 * Returns 0 on success, negative on failure82 **/83int fm10k_setup_rx_resources(struct fm10k_ring *rx_ring)84{85	struct device *dev = rx_ring->dev;86	int size;87 88	size = sizeof(struct fm10k_rx_buffer) * rx_ring->count;89 90	rx_ring->rx_buffer = vzalloc(size);91	if (!rx_ring->rx_buffer)92		goto err;93 94	u64_stats_init(&rx_ring->syncp);95 96	/* Round up to nearest 4K */97	rx_ring->size = rx_ring->count * sizeof(union fm10k_rx_desc);98	rx_ring->size = ALIGN(rx_ring->size, 4096);99 100	rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,101					   &rx_ring->dma, GFP_KERNEL);102	if (!rx_ring->desc)103		goto err;104 105	return 0;106err:107	vfree(rx_ring->rx_buffer);108	rx_ring->rx_buffer = NULL;109	return -ENOMEM;110}111 112/**113 * fm10k_setup_all_rx_resources - allocate all queues Rx resources114 * @interface: board private structure115 *116 * If this function returns with an error, then it's possible one or117 * more of the rings is populated (while the rest are not).  It is the118 * callers duty to clean those orphaned rings.119 *120 * Return 0 on success, negative on failure121 **/122static int fm10k_setup_all_rx_resources(struct fm10k_intfc *interface)123{124	int i, err;125 126	for (i = 0; i < interface->num_rx_queues; i++) {127		err = fm10k_setup_rx_resources(interface->rx_ring[i]);128		if (!err)129			continue;130 131		netif_err(interface, probe, interface->netdev,132			  "Allocation for Rx Queue %u failed\n", i);133		goto err_setup_rx;134	}135 136	return 0;137err_setup_rx:138	/* rewind the index freeing the rings as we go */139	while (i--)140		fm10k_free_rx_resources(interface->rx_ring[i]);141	return err;142}143 144void fm10k_unmap_and_free_tx_resource(struct fm10k_ring *ring,145				      struct fm10k_tx_buffer *tx_buffer)146{147	if (tx_buffer->skb) {148		dev_kfree_skb_any(tx_buffer->skb);149		if (dma_unmap_len(tx_buffer, len))150			dma_unmap_single(ring->dev,151					 dma_unmap_addr(tx_buffer, dma),152					 dma_unmap_len(tx_buffer, len),153					 DMA_TO_DEVICE);154	} else if (dma_unmap_len(tx_buffer, len)) {155		dma_unmap_page(ring->dev,156			       dma_unmap_addr(tx_buffer, dma),157			       dma_unmap_len(tx_buffer, len),158			       DMA_TO_DEVICE);159	}160	tx_buffer->next_to_watch = NULL;161	tx_buffer->skb = NULL;162	dma_unmap_len_set(tx_buffer, len, 0);163	/* tx_buffer must be completely set up in the transmit path */164}165 166/**167 * fm10k_clean_tx_ring - Free Tx Buffers168 * @tx_ring: ring to be cleaned169 **/170static void fm10k_clean_tx_ring(struct fm10k_ring *tx_ring)171{172	unsigned long size;173	u16 i;174 175	/* ring already cleared, nothing to do */176	if (!tx_ring->tx_buffer)177		return;178 179	/* Free all the Tx ring sk_buffs */180	for (i = 0; i < tx_ring->count; i++) {181		struct fm10k_tx_buffer *tx_buffer = &tx_ring->tx_buffer[i];182 183		fm10k_unmap_and_free_tx_resource(tx_ring, tx_buffer);184	}185 186	/* reset BQL values */187	netdev_tx_reset_queue(txring_txq(tx_ring));188 189	size = sizeof(struct fm10k_tx_buffer) * tx_ring->count;190	memset(tx_ring->tx_buffer, 0, size);191 192	/* Zero out the descriptor ring */193	memset(tx_ring->desc, 0, tx_ring->size);194}195 196/**197 * fm10k_free_tx_resources - Free Tx Resources per Queue198 * @tx_ring: Tx descriptor ring for a specific queue199 *200 * Free all transmit software resources201 **/202void fm10k_free_tx_resources(struct fm10k_ring *tx_ring)203{204	fm10k_clean_tx_ring(tx_ring);205 206	vfree(tx_ring->tx_buffer);207	tx_ring->tx_buffer = NULL;208 209	/* if not set, then don't free */210	if (!tx_ring->desc)211		return;212 213	dma_free_coherent(tx_ring->dev, tx_ring->size,214			  tx_ring->desc, tx_ring->dma);215	tx_ring->desc = NULL;216}217 218/**219 * fm10k_clean_all_tx_rings - Free Tx Buffers for all queues220 * @interface: board private structure221 **/222void fm10k_clean_all_tx_rings(struct fm10k_intfc *interface)223{224	int i;225 226	for (i = 0; i < interface->num_tx_queues; i++)227		fm10k_clean_tx_ring(interface->tx_ring[i]);228}229 230/**231 * fm10k_free_all_tx_resources - Free Tx Resources for All Queues232 * @interface: board private structure233 *234 * Free all transmit software resources235 **/236static void fm10k_free_all_tx_resources(struct fm10k_intfc *interface)237{238	int i = interface->num_tx_queues;239 240	while (i--)241		fm10k_free_tx_resources(interface->tx_ring[i]);242}243 244/**245 * fm10k_clean_rx_ring - Free Rx Buffers per Queue246 * @rx_ring: ring to free buffers from247 **/248static void fm10k_clean_rx_ring(struct fm10k_ring *rx_ring)249{250	unsigned long size;251	u16 i;252 253	if (!rx_ring->rx_buffer)254		return;255 256	dev_kfree_skb(rx_ring->skb);257	rx_ring->skb = NULL;258 259	/* Free all the Rx ring sk_buffs */260	for (i = 0; i < rx_ring->count; i++) {261		struct fm10k_rx_buffer *buffer = &rx_ring->rx_buffer[i];262		/* clean-up will only set page pointer to NULL */263		if (!buffer->page)264			continue;265 266		dma_unmap_page(rx_ring->dev, buffer->dma,267			       PAGE_SIZE, DMA_FROM_DEVICE);268		__free_page(buffer->page);269 270		buffer->page = NULL;271	}272 273	size = sizeof(struct fm10k_rx_buffer) * rx_ring->count;274	memset(rx_ring->rx_buffer, 0, size);275 276	/* Zero out the descriptor ring */277	memset(rx_ring->desc, 0, rx_ring->size);278 279	rx_ring->next_to_alloc = 0;280	rx_ring->next_to_clean = 0;281	rx_ring->next_to_use = 0;282}283 284/**285 * fm10k_free_rx_resources - Free Rx Resources286 * @rx_ring: ring to clean the resources from287 *288 * Free all receive software resources289 **/290void fm10k_free_rx_resources(struct fm10k_ring *rx_ring)291{292	fm10k_clean_rx_ring(rx_ring);293 294	vfree(rx_ring->rx_buffer);295	rx_ring->rx_buffer = NULL;296 297	/* if not set, then don't free */298	if (!rx_ring->desc)299		return;300 301	dma_free_coherent(rx_ring->dev, rx_ring->size,302			  rx_ring->desc, rx_ring->dma);303 304	rx_ring->desc = NULL;305}306 307/**308 * fm10k_clean_all_rx_rings - Free Rx Buffers for all queues309 * @interface: board private structure310 **/311void fm10k_clean_all_rx_rings(struct fm10k_intfc *interface)312{313	int i;314 315	for (i = 0; i < interface->num_rx_queues; i++)316		fm10k_clean_rx_ring(interface->rx_ring[i]);317}318 319/**320 * fm10k_free_all_rx_resources - Free Rx Resources for All Queues321 * @interface: board private structure322 *323 * Free all receive software resources324 **/325static void fm10k_free_all_rx_resources(struct fm10k_intfc *interface)326{327	int i = interface->num_rx_queues;328 329	while (i--)330		fm10k_free_rx_resources(interface->rx_ring[i]);331}332 333/**334 * fm10k_request_glort_range - Request GLORTs for use in configuring rules335 * @interface: board private structure336 *337 * This function allocates a range of glorts for this interface to use.338 **/339static void fm10k_request_glort_range(struct fm10k_intfc *interface)340{341	struct fm10k_hw *hw = &interface->hw;342	u16 mask = (~hw->mac.dglort_map) >> FM10K_DGLORTMAP_MASK_SHIFT;343 344	/* establish GLORT base */345	interface->glort = hw->mac.dglort_map & FM10K_DGLORTMAP_NONE;346	interface->glort_count = 0;347 348	/* nothing we can do until mask is allocated */349	if (hw->mac.dglort_map == FM10K_DGLORTMAP_NONE)350		return;351 352	/* we support 3 possible GLORT configurations.353	 * 1: VFs consume all but the last 1354	 * 2: VFs and PF split glorts with possible gap between355	 * 3: VFs allocated first 64, all others belong to PF356	 */357	if (mask <= hw->iov.total_vfs) {358		interface->glort_count = 1;359		interface->glort += mask;360	} else if (mask < 64) {361		interface->glort_count = (mask + 1) / 2;362		interface->glort += interface->glort_count;363	} else {364		interface->glort_count = mask - 63;365		interface->glort += 64;366	}367}368 369/**370 * fm10k_restore_udp_port_info371 * @interface: board private structure372 *373 * This function restores the value in the tunnel_cfg register(s) after reset374 **/375static void fm10k_restore_udp_port_info(struct fm10k_intfc *interface)376{377	struct fm10k_hw *hw = &interface->hw;378 379	/* only the PF supports configuring tunnels */380	if (hw->mac.type != fm10k_mac_pf)381		return;382 383	/* restore tunnel configuration register */384	fm10k_write_reg(hw, FM10K_TUNNEL_CFG,385			ntohs(interface->vxlan_port) |386			(ETH_P_TEB << FM10K_TUNNEL_CFG_NVGRE_SHIFT));387 388	/* restore Geneve tunnel configuration register */389	fm10k_write_reg(hw, FM10K_TUNNEL_CFG_GENEVE,390			ntohs(interface->geneve_port));391}392 393/**394 * fm10k_udp_tunnel_sync - Called when UDP tunnel ports change395 * @dev: network interface device structure396 * @table: Tunnel table (according to tables of @fm10k_udp_tunnels)397 *398 * This function is called when a new UDP tunnel port is added or deleted.399 * Due to hardware restrictions, only one port per type can be offloaded at400 * once. Core will send to the driver a port of its choice.401 **/402static int fm10k_udp_tunnel_sync(struct net_device *dev, unsigned int table)403{404	struct fm10k_intfc *interface = netdev_priv(dev);405	struct udp_tunnel_info ti;406 407	udp_tunnel_nic_get_port(dev, table, 0, &ti);408	if (!table)409		interface->vxlan_port = ti.port;410	else411		interface->geneve_port = ti.port;412 413	fm10k_restore_udp_port_info(interface);414	return 0;415}416 417static const struct udp_tunnel_nic_info fm10k_udp_tunnels = {418	.sync_table	= fm10k_udp_tunnel_sync,419	.tables		= {420		{ .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_VXLAN,  },421		{ .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_GENEVE, },422	},423};424 425/**426 * fm10k_open - Called when a network interface is made active427 * @netdev: network interface device structure428 *429 * Returns 0 on success, negative value on failure430 *431 * The open entry point is called when a network interface is made432 * active by the system (IFF_UP).  At this point all resources needed433 * for transmit and receive operations are allocated, the interrupt434 * handler is registered with the OS, the watchdog timer is started,435 * and the stack is notified that the interface is ready.436 **/437int fm10k_open(struct net_device *netdev)438{439	struct fm10k_intfc *interface = netdev_priv(netdev);440	int err;441 442	/* allocate transmit descriptors */443	err = fm10k_setup_all_tx_resources(interface);444	if (err)445		goto err_setup_tx;446 447	/* allocate receive descriptors */448	err = fm10k_setup_all_rx_resources(interface);449	if (err)450		goto err_setup_rx;451 452	/* allocate interrupt resources */453	err = fm10k_qv_request_irq(interface);454	if (err)455		goto err_req_irq;456 457	/* setup GLORT assignment for this port */458	fm10k_request_glort_range(interface);459 460	/* Notify the stack of the actual queue counts */461	err = netif_set_real_num_tx_queues(netdev,462					   interface->num_tx_queues);463	if (err)464		goto err_set_queues;465 466	err = netif_set_real_num_rx_queues(netdev,467					   interface->num_rx_queues);468	if (err)469		goto err_set_queues;470 471	fm10k_up(interface);472 473	return 0;474 475err_set_queues:476	fm10k_qv_free_irq(interface);477err_req_irq:478	fm10k_free_all_rx_resources(interface);479err_setup_rx:480	fm10k_free_all_tx_resources(interface);481err_setup_tx:482	return err;483}484 485/**486 * fm10k_close - Disables a network interface487 * @netdev: network interface device structure488 *489 * Returns 0, this is not allowed to fail490 *491 * The close entry point is called when an interface is de-activated492 * by the OS.  The hardware is still under the drivers control, but493 * needs to be disabled.  A global MAC reset is issued to stop the494 * hardware, and all transmit and receive resources are freed.495 **/496int fm10k_close(struct net_device *netdev)497{498	struct fm10k_intfc *interface = netdev_priv(netdev);499 500	fm10k_down(interface);501 502	fm10k_qv_free_irq(interface);503 504	fm10k_free_all_tx_resources(interface);505	fm10k_free_all_rx_resources(interface);506 507	return 0;508}509 510static netdev_tx_t fm10k_xmit_frame(struct sk_buff *skb, struct net_device *dev)511{512	struct fm10k_intfc *interface = netdev_priv(dev);513	int num_tx_queues = READ_ONCE(interface->num_tx_queues);514	unsigned int r_idx = skb->queue_mapping;515	int err;516 517	if (!num_tx_queues)518		return NETDEV_TX_BUSY;519 520	if ((skb->protocol == htons(ETH_P_8021Q)) &&521	    !skb_vlan_tag_present(skb)) {522		/* FM10K only supports hardware tagging, any tags in frame523		 * are considered 2nd level or "outer" tags524		 */525		struct vlan_hdr *vhdr;526		__be16 proto;527 528		/* make sure skb is not shared */529		skb = skb_share_check(skb, GFP_ATOMIC);530		if (!skb)531			return NETDEV_TX_OK;532 533		/* make sure there is enough room to move the ethernet header */534		if (unlikely(!pskb_may_pull(skb, VLAN_ETH_HLEN)))535			return NETDEV_TX_OK;536 537		/* verify the skb head is not shared */538		err = skb_cow_head(skb, 0);539		if (err) {540			dev_kfree_skb(skb);541			return NETDEV_TX_OK;542		}543 544		/* locate VLAN header */545		vhdr = (struct vlan_hdr *)(skb->data + ETH_HLEN);546 547		/* pull the 2 key pieces of data out of it */548		__vlan_hwaccel_put_tag(skb,549				       htons(ETH_P_8021Q),550				       ntohs(vhdr->h_vlan_TCI));551		proto = vhdr->h_vlan_encapsulated_proto;552		skb->protocol = (ntohs(proto) >= 1536) ? proto :553							 htons(ETH_P_802_2);554 555		/* squash it by moving the ethernet addresses up 4 bytes */556		memmove(skb->data + VLAN_HLEN, skb->data, 12);557		__skb_pull(skb, VLAN_HLEN);558		skb_reset_mac_header(skb);559	}560 561	/* The minimum packet size for a single buffer is 17B so pad the skb562	 * in order to meet this minimum size requirement.563	 */564	if (unlikely(skb->len < 17)) {565		int pad_len = 17 - skb->len;566 567		if (skb_pad(skb, pad_len))568			return NETDEV_TX_OK;569		__skb_put(skb, pad_len);570	}571 572	if (r_idx >= num_tx_queues)573		r_idx %= num_tx_queues;574 575	err = fm10k_xmit_frame_ring(skb, interface->tx_ring[r_idx]);576 577	return err;578}579 580/**581 * fm10k_tx_timeout - Respond to a Tx Hang582 * @netdev: network interface device structure583 * @txqueue: the index of the Tx queue that timed out584 **/585static void fm10k_tx_timeout(struct net_device *netdev, unsigned int txqueue)586{587	struct fm10k_intfc *interface = netdev_priv(netdev);588	struct fm10k_ring *tx_ring;589	bool real_tx_hang = false;590 591	if (txqueue >= interface->num_tx_queues) {592		WARN(1, "invalid Tx queue index %d", txqueue);593		return;594	}595 596	tx_ring = interface->tx_ring[txqueue];597	if (check_for_tx_hang(tx_ring) && fm10k_check_tx_hang(tx_ring))598		real_tx_hang = true;599 600#define TX_TIMEO_LIMIT 16000601	if (real_tx_hang) {602		fm10k_tx_timeout_reset(interface);603	} else {604		netif_info(interface, drv, netdev,605			   "Fake Tx hang detected with timeout of %d seconds\n",606			   netdev->watchdog_timeo / HZ);607 608		/* fake Tx hang - increase the kernel timeout */609		if (netdev->watchdog_timeo < TX_TIMEO_LIMIT)610			netdev->watchdog_timeo *= 2;611	}612}613 614/**615 * fm10k_host_mbx_ready - Check PF interface's mailbox readiness616 * @interface: board private structure617 *618 * This function checks if the PF interface's mailbox is ready before queueing619 * mailbox messages for transmission. This will prevent filling the TX mailbox620 * queue when the receiver is not ready. VF interfaces are exempt from this621 * check since it will block all PF-VF mailbox messages from being sent from622 * the VF to the PF at initialization.623 **/624static bool fm10k_host_mbx_ready(struct fm10k_intfc *interface)625{626	struct fm10k_hw *hw = &interface->hw;627 628	return (hw->mac.type == fm10k_mac_vf || interface->host_ready);629}630 631/**632 * fm10k_queue_vlan_request - Queue a VLAN update request633 * @interface: the fm10k interface structure634 * @vid: the VLAN vid635 * @vsi: VSI index number636 * @set: whether to set or clear637 *638 * This function queues up a VLAN update. For VFs, this must be sent to the639 * managing PF over the mailbox. For PFs, we'll use the same handling so that640 * it's similar to the VF. This avoids storming the PF<->VF mailbox with too641 * many VLAN updates during reset.642 */643int fm10k_queue_vlan_request(struct fm10k_intfc *interface,644			     u32 vid, u8 vsi, bool set)645{646	struct fm10k_macvlan_request *request;647	unsigned long flags;648 649	/* This must be atomic since we may be called while the netdev650	 * addr_list_lock is held651	 */652	request = kzalloc(sizeof(*request), GFP_ATOMIC);653	if (!request)654		return -ENOMEM;655 656	request->type = FM10K_VLAN_REQUEST;657	request->vlan.vid = vid;658	request->vlan.vsi = vsi;659	request->set = set;660 661	spin_lock_irqsave(&interface->macvlan_lock, flags);662	list_add_tail(&request->list, &interface->macvlan_requests);663	spin_unlock_irqrestore(&interface->macvlan_lock, flags);664 665	fm10k_macvlan_schedule(interface);666 667	return 0;668}669 670/**671 * fm10k_queue_mac_request - Queue a MAC update request672 * @interface: the fm10k interface structure673 * @glort: the target glort for this update674 * @addr: the address to update675 * @vid: the vid to update676 * @set: whether to add or remove677 *678 * This function queues up a MAC request for sending to the switch manager.679 * A separate thread monitors the queue and sends updates to the switch680 * manager. Return 0 on success, and negative error code on failure.681 **/682int fm10k_queue_mac_request(struct fm10k_intfc *interface, u16 glort,683			    const unsigned char *addr, u16 vid, bool set)684{685	struct fm10k_macvlan_request *request;686	unsigned long flags;687 688	/* This must be atomic since we may be called while the netdev689	 * addr_list_lock is held690	 */691	request = kzalloc(sizeof(*request), GFP_ATOMIC);692	if (!request)693		return -ENOMEM;694 695	if (is_multicast_ether_addr(addr))696		request->type = FM10K_MC_MAC_REQUEST;697	else698		request->type = FM10K_UC_MAC_REQUEST;699 700	ether_addr_copy(request->mac.addr, addr);701	request->mac.glort = glort;702	request->mac.vid = vid;703	request->set = set;704 705	spin_lock_irqsave(&interface->macvlan_lock, flags);706	list_add_tail(&request->list, &interface->macvlan_requests);707	spin_unlock_irqrestore(&interface->macvlan_lock, flags);708 709	fm10k_macvlan_schedule(interface);710 711	return 0;712}713 714/**715 * fm10k_clear_macvlan_queue - Cancel pending updates for a given glort716 * @interface: the fm10k interface structure717 * @glort: the target glort to clear718 * @vlans: true to clear VLAN messages, false to ignore them719 *720 * Cancel any outstanding MAC/VLAN requests for a given glort. This is721 * expected to be called when a logical port goes down.722 **/723void fm10k_clear_macvlan_queue(struct fm10k_intfc *interface,724			       u16 glort, bool vlans)725 726{727	struct fm10k_macvlan_request *r, *tmp;728	unsigned long flags;729 730	spin_lock_irqsave(&interface->macvlan_lock, flags);731 732	/* Free any outstanding MAC/VLAN requests for this interface */733	list_for_each_entry_safe(r, tmp, &interface->macvlan_requests, list) {734		switch (r->type) {735		case FM10K_MC_MAC_REQUEST:736		case FM10K_UC_MAC_REQUEST:737			/* Don't free requests for other interfaces */738			if (r->mac.glort != glort)739				break;740			fallthrough;741		case FM10K_VLAN_REQUEST:742			if (vlans) {743				list_del(&r->list);744				kfree(r);745			}746			break;747		}748	}749 750	spin_unlock_irqrestore(&interface->macvlan_lock, flags);751}752 753static int fm10k_uc_vlan_unsync(struct net_device *netdev,754				const unsigned char *uc_addr)755{756	struct fm10k_intfc *interface = netdev_priv(netdev);757	u16 glort = interface->glort;758	u16 vid = interface->vid;759	bool set = !!(vid / VLAN_N_VID);760	int err;761 762	/* drop any leading bits on the VLAN ID */763	vid &= VLAN_N_VID - 1;764 765	err = fm10k_queue_mac_request(interface, glort, uc_addr, vid, set);766	if (err)767		return err;768 769	/* return non-zero value as we are only doing a partial sync/unsync */770	return 1;771}772 773static int fm10k_mc_vlan_unsync(struct net_device *netdev,774				const unsigned char *mc_addr)775{776	struct fm10k_intfc *interface = netdev_priv(netdev);777	u16 glort = interface->glort;778	u16 vid = interface->vid;779	bool set = !!(vid / VLAN_N_VID);780	int err;781 782	/* drop any leading bits on the VLAN ID */783	vid &= VLAN_N_VID - 1;784 785	err = fm10k_queue_mac_request(interface, glort, mc_addr, vid, set);786	if (err)787		return err;788 789	/* return non-zero value as we are only doing a partial sync/unsync */790	return 1;791}792 793static int fm10k_update_vid(struct net_device *netdev, u16 vid, bool set)794{795	struct fm10k_intfc *interface = netdev_priv(netdev);796	struct fm10k_l2_accel *l2_accel = interface->l2_accel;797	struct fm10k_hw *hw = &interface->hw;798	u16 glort;799	s32 err;800	int i;801 802	/* updates do not apply to VLAN 0 */803	if (!vid)804		return 0;805 806	if (vid >= VLAN_N_VID)807		return -EINVAL;808 809	/* Verify that we have permission to add VLANs. If this is a request810	 * to remove a VLAN, we still want to allow the user to remove the811	 * VLAN device. In that case, we need to clear the bit in the812	 * active_vlans bitmask.813	 */814	if (set && hw->mac.vlan_override)815		return -EACCES;816 817	/* update active_vlans bitmask */818	set_bit(vid, interface->active_vlans);819	if (!set)820		clear_bit(vid, interface->active_vlans);821 822	/* disable the default VLAN ID on ring if we have an active VLAN */823	for (i = 0; i < interface->num_rx_queues; i++) {824		struct fm10k_ring *rx_ring = interface->rx_ring[i];825		u16 rx_vid = rx_ring->vid & (VLAN_N_VID - 1);826 827		if (test_bit(rx_vid, interface->active_vlans))828			rx_ring->vid |= FM10K_VLAN_CLEAR;829		else830			rx_ring->vid &= ~FM10K_VLAN_CLEAR;831	}832 833	/* If our VLAN has been overridden, there is no reason to send VLAN834	 * removal requests as they will be silently ignored.835	 */836	if (hw->mac.vlan_override)837		return 0;838 839	/* Do not remove default VLAN ID related entries from VLAN and MAC840	 * tables841	 */842	if (!set && vid == hw->mac.default_vid)843		return 0;844 845	/* Do not throw an error if the interface is down. We will sync once846	 * we come up847	 */848	if (test_bit(__FM10K_DOWN, interface->state))849		return 0;850 851	fm10k_mbx_lock(interface);852 853	/* only need to update the VLAN if not in promiscuous mode */854	if (!(netdev->flags & IFF_PROMISC)) {855		err = fm10k_queue_vlan_request(interface, vid, 0, set);856		if (err)857			goto err_out;858	}859 860	/* Update our base MAC address */861	err = fm10k_queue_mac_request(interface, interface->glort,862				      hw->mac.addr, vid, set);863	if (err)864		goto err_out;865 866	/* Update L2 accelerated macvlan addresses */867	if (l2_accel) {868		for (i = 0; i < l2_accel->size; i++) {869			struct net_device *sdev = l2_accel->macvlan[i];870 871			if (!sdev)872				continue;873 874			glort = l2_accel->dglort + 1 + i;875 876			fm10k_queue_mac_request(interface, glort,877						sdev->dev_addr,878						vid, set);879		}880	}881 882	/* set VLAN ID prior to syncing/unsyncing the VLAN */883	interface->vid = vid + (set ? VLAN_N_VID : 0);884 885	/* Update the unicast and multicast address list to add/drop VLAN */886	__dev_uc_unsync(netdev, fm10k_uc_vlan_unsync);887	__dev_mc_unsync(netdev, fm10k_mc_vlan_unsync);888 889err_out:890	fm10k_mbx_unlock(interface);891 892	return err;893}894 895static int fm10k_vlan_rx_add_vid(struct net_device *netdev,896				 __always_unused __be16 proto, u16 vid)897{898	/* update VLAN and address table based on changes */899	return fm10k_update_vid(netdev, vid, true);900}901 902static int fm10k_vlan_rx_kill_vid(struct net_device *netdev,903				  __always_unused __be16 proto, u16 vid)904{905	/* update VLAN and address table based on changes */906	return fm10k_update_vid(netdev, vid, false);907}908 909static u16 fm10k_find_next_vlan(struct fm10k_intfc *interface, u16 vid)910{911	struct fm10k_hw *hw = &interface->hw;912	u16 default_vid = hw->mac.default_vid;913	u16 vid_limit = vid < default_vid ? default_vid : VLAN_N_VID;914 915	vid = find_next_bit(interface->active_vlans, vid_limit, ++vid);916 917	return vid;918}919 920static void fm10k_clear_unused_vlans(struct fm10k_intfc *interface)921{922	u32 vid, prev_vid;923 924	/* loop through and find any gaps in the table */925	for (vid = 0, prev_vid = 0;926	     prev_vid < VLAN_N_VID;927	     prev_vid = vid + 1, vid = fm10k_find_next_vlan(interface, vid)) {928		if (prev_vid == vid)929			continue;930 931		/* send request to clear multiple bits at a time */932		prev_vid += (vid - prev_vid - 1) << FM10K_VLAN_LENGTH_SHIFT;933		fm10k_queue_vlan_request(interface, prev_vid, 0, false);934	}935}936 937static int __fm10k_uc_sync(struct net_device *dev,938			   const unsigned char *addr, bool sync)939{940	struct fm10k_intfc *interface = netdev_priv(dev);941	u16 vid, glort = interface->glort;942	s32 err;943 944	if (!is_valid_ether_addr(addr))945		return -EADDRNOTAVAIL;946 947	for (vid = fm10k_find_next_vlan(interface, 0);948	     vid < VLAN_N_VID;949	     vid = fm10k_find_next_vlan(interface, vid)) {950		err = fm10k_queue_mac_request(interface, glort,951					      addr, vid, sync);952		if (err)953			return err;954	}955 956	return 0;957}958 959static int fm10k_uc_sync(struct net_device *dev,960			 const unsigned char *addr)961{962	return __fm10k_uc_sync(dev, addr, true);963}964 965static int fm10k_uc_unsync(struct net_device *dev,966			   const unsigned char *addr)967{968	return __fm10k_uc_sync(dev, addr, false);969}970 971static int fm10k_set_mac(struct net_device *dev, void *p)972{973	struct fm10k_intfc *interface = netdev_priv(dev);974	struct fm10k_hw *hw = &interface->hw;975	struct sockaddr *addr = p;976	s32 err = 0;977 978	if (!is_valid_ether_addr(addr->sa_data))979		return -EADDRNOTAVAIL;980 981	if (dev->flags & IFF_UP) {982		/* setting MAC address requires mailbox */983		fm10k_mbx_lock(interface);984 985		err = fm10k_uc_sync(dev, addr->sa_data);986		if (!err)987			fm10k_uc_unsync(dev, hw->mac.addr);988 989		fm10k_mbx_unlock(interface);990	}991 992	if (!err) {993		eth_hw_addr_set(dev, addr->sa_data);994		ether_addr_copy(hw->mac.addr, addr->sa_data);995		dev->addr_assign_type &= ~NET_ADDR_RANDOM;996	}997 998	/* if we had a mailbox error suggest trying again */999	return err ? -EAGAIN : 0;1000}1001 1002static int __fm10k_mc_sync(struct net_device *dev,1003			   const unsigned char *addr, bool sync)1004{1005	struct fm10k_intfc *interface = netdev_priv(dev);1006	u16 vid, glort = interface->glort;1007	s32 err;1008 1009	if (!is_multicast_ether_addr(addr))1010		return -EADDRNOTAVAIL;1011 1012	for (vid = fm10k_find_next_vlan(interface, 0);1013	     vid < VLAN_N_VID;1014	     vid = fm10k_find_next_vlan(interface, vid)) {1015		err = fm10k_queue_mac_request(interface, glort,1016					      addr, vid, sync);1017		if (err)1018			return err;1019	}1020 1021	return 0;1022}1023 1024static int fm10k_mc_sync(struct net_device *dev,1025			 const unsigned char *addr)1026{1027	return __fm10k_mc_sync(dev, addr, true);1028}1029 1030static int fm10k_mc_unsync(struct net_device *dev,1031			   const unsigned char *addr)1032{1033	return __fm10k_mc_sync(dev, addr, false);1034}1035 1036static void fm10k_set_rx_mode(struct net_device *dev)1037{1038	struct fm10k_intfc *interface = netdev_priv(dev);1039	struct fm10k_hw *hw = &interface->hw;1040	int xcast_mode;1041 1042	/* no need to update the harwdare if we are not running */1043	if (!(dev->flags & IFF_UP))1044		return;1045 1046	/* determine new mode based on flags */1047	xcast_mode = (dev->flags & IFF_PROMISC) ? FM10K_XCAST_MODE_PROMISC :1048		     (dev->flags & IFF_ALLMULTI) ? FM10K_XCAST_MODE_ALLMULTI :1049		     (dev->flags & (IFF_BROADCAST | IFF_MULTICAST)) ?1050		     FM10K_XCAST_MODE_MULTI : FM10K_XCAST_MODE_NONE;1051 1052	fm10k_mbx_lock(interface);1053 1054	/* update xcast mode first, but only if it changed */1055	if (interface->xcast_mode != xcast_mode) {1056		/* update VLAN table when entering promiscuous mode */1057		if (xcast_mode == FM10K_XCAST_MODE_PROMISC)1058			fm10k_queue_vlan_request(interface, FM10K_VLAN_ALL,1059						 0, true);1060 1061		/* clear VLAN table when exiting promiscuous mode */1062		if (interface->xcast_mode == FM10K_XCAST_MODE_PROMISC)1063			fm10k_clear_unused_vlans(interface);1064 1065		/* update xcast mode if host's mailbox is ready */1066		if (fm10k_host_mbx_ready(interface))1067			hw->mac.ops.update_xcast_mode(hw, interface->glort,1068						      xcast_mode);1069 1070		/* record updated xcast mode state */1071		interface->xcast_mode = xcast_mode;1072	}1073 1074	/* synchronize all of the addresses */1075	__dev_uc_sync(dev, fm10k_uc_sync, fm10k_uc_unsync);1076	__dev_mc_sync(dev, fm10k_mc_sync, fm10k_mc_unsync);1077 1078	fm10k_mbx_unlock(interface);1079}1080 1081void fm10k_restore_rx_state(struct fm10k_intfc *interface)1082{1083	struct fm10k_l2_accel *l2_accel = interface->l2_accel;1084	struct net_device *netdev = interface->netdev;1085	struct fm10k_hw *hw = &interface->hw;1086	int xcast_mode, i;1087	u16 vid, glort;1088 1089	/* record glort for this interface */1090	glort = interface->glort;1091 1092	/* convert interface flags to xcast mode */1093	if (netdev->flags & IFF_PROMISC)1094		xcast_mode = FM10K_XCAST_MODE_PROMISC;1095	else if (netdev->flags & IFF_ALLMULTI)1096		xcast_mode = FM10K_XCAST_MODE_ALLMULTI;1097	else if (netdev->flags & (IFF_BROADCAST | IFF_MULTICAST))1098		xcast_mode = FM10K_XCAST_MODE_MULTI;1099	else1100		xcast_mode = FM10K_XCAST_MODE_NONE;1101 1102	fm10k_mbx_lock(interface);1103 1104	/* Enable logical port if host's mailbox is ready */1105	if (fm10k_host_mbx_ready(interface))1106		hw->mac.ops.update_lport_state(hw, glort,1107					       interface->glort_count, true);1108 1109	/* update VLAN table */1110	fm10k_queue_vlan_request(interface, FM10K_VLAN_ALL, 0,1111				 xcast_mode == FM10K_XCAST_MODE_PROMISC);1112 1113	/* update table with current entries */1114	for (vid = fm10k_find_next_vlan(interface, 0);1115	     vid < VLAN_N_VID;1116	     vid = fm10k_find_next_vlan(interface, vid)) {1117		fm10k_queue_vlan_request(interface, vid, 0, true);1118 1119		fm10k_queue_mac_request(interface, glort,1120					hw->mac.addr, vid, true);1121 1122		/* synchronize macvlan addresses */1123		if (l2_accel) {1124			for (i = 0; i < l2_accel->size; i++) {1125				struct net_device *sdev = l2_accel->macvlan[i];1126 1127				if (!sdev)1128					continue;1129 1130				glort = l2_accel->dglort + 1 + i;1131 1132				fm10k_queue_mac_request(interface, glort,1133							sdev->dev_addr,1134							vid, true);1135			}1136		}1137	}1138 1139	/* update xcast mode before synchronizing addresses if host's mailbox1140	 * is ready1141	 */1142	if (fm10k_host_mbx_ready(interface))1143		hw->mac.ops.update_xcast_mode(hw, glort, xcast_mode);1144 1145	/* synchronize all of the addresses */1146	__dev_uc_sync(netdev, fm10k_uc_sync, fm10k_uc_unsync);1147	__dev_mc_sync(netdev, fm10k_mc_sync, fm10k_mc_unsync);1148 1149	/* synchronize macvlan addresses */1150	if (l2_accel) {1151		for (i = 0; i < l2_accel->size; i++) {1152			struct net_device *sdev = l2_accel->macvlan[i];1153 1154			if (!sdev)1155				continue;1156 1157			glort = l2_accel->dglort + 1 + i;1158 1159			hw->mac.ops.update_xcast_mode(hw, glort,1160						      FM10K_XCAST_MODE_NONE);1161			fm10k_queue_mac_request(interface, glort,1162						sdev->dev_addr,1163						hw->mac.default_vid, true);1164		}1165	}1166 1167	fm10k_mbx_unlock(interface);1168 1169	/* record updated xcast mode state */1170	interface->xcast_mode = xcast_mode;1171 1172	/* Restore tunnel configuration */1173	fm10k_restore_udp_port_info(interface);1174}1175 1176void fm10k_reset_rx_state(struct fm10k_intfc *interface)1177{1178	struct net_device *netdev = interface->netdev;1179	struct fm10k_hw *hw = &interface->hw;1180 1181	/* Wait for MAC/VLAN work to finish */1182	while (test_bit(__FM10K_MACVLAN_SCHED, interface->state))1183		usleep_range(1000, 2000);1184 1185	/* Cancel pending MAC/VLAN requests */1186	fm10k_clear_macvlan_queue(interface, interface->glort, true);1187 1188	fm10k_mbx_lock(interface);1189 1190	/* clear the logical port state on lower device if host's mailbox is1191	 * ready1192	 */1193	if (fm10k_host_mbx_ready(interface))1194		hw->mac.ops.update_lport_state(hw, interface->glort,1195					       interface->glort_count, false);1196 1197	fm10k_mbx_unlock(interface);1198 1199	/* reset flags to default state */1200	interface->xcast_mode = FM10K_XCAST_MODE_NONE;1201 1202	/* clear the sync flag since the lport has been dropped */1203	__dev_uc_unsync(netdev, NULL);1204	__dev_mc_unsync(netdev, NULL);1205}1206 1207/**1208 * fm10k_get_stats64 - Get System Network Statistics1209 * @netdev: network interface device structure1210 * @stats: storage space for 64bit statistics1211 *1212 * Obtain 64bit statistics in a way that is safe for both 32bit and 64bit1213 * architectures.1214 */1215static void fm10k_get_stats64(struct net_device *netdev,1216			      struct rtnl_link_stats64 *stats)1217{1218	struct fm10k_intfc *interface = netdev_priv(netdev);1219	struct fm10k_ring *ring;1220	unsigned int start, i;1221	u64 bytes, packets;1222 1223	rcu_read_lock();1224 1225	for (i = 0; i < interface->num_rx_queues; i++) {1226		ring = READ_ONCE(interface->rx_ring[i]);1227 1228		if (!ring)1229			continue;1230 1231		do {1232			start = u64_stats_fetch_begin(&ring->syncp);1233			packets = ring->stats.packets;1234			bytes   = ring->stats.bytes;1235		} while (u64_stats_fetch_retry(&ring->syncp, start));1236 1237		stats->rx_packets += packets;1238		stats->rx_bytes   += bytes;1239	}1240 1241	for (i = 0; i < interface->num_tx_queues; i++) {1242		ring = READ_ONCE(interface->tx_ring[i]);1243 1244		if (!ring)1245			continue;1246 1247		do {1248			start = u64_stats_fetch_begin(&ring->syncp);1249			packets = ring->stats.packets;1250			bytes   = ring->stats.bytes;1251		} while (u64_stats_fetch_retry(&ring->syncp, start));1252 1253		stats->tx_packets += packets;1254		stats->tx_bytes   += bytes;1255	}1256 1257	rcu_read_unlock();1258 1259	/* following stats updated by fm10k_service_task() */1260	stats->rx_missed_errors	= netdev->stats.rx_missed_errors;1261}1262 1263int fm10k_setup_tc(struct net_device *dev, u8 tc)1264{1265	struct fm10k_intfc *interface = netdev_priv(dev);1266	int err;1267 1268	/* Currently only the PF supports priority classes */1269	if (tc && (interface->hw.mac.type != fm10k_mac_pf))1270		return -EINVAL;1271 1272	/* Hardware supports up to 8 traffic classes */1273	if (tc > 8)1274		return -EINVAL;1275 1276	/* Hardware has to reinitialize queues to match packet1277	 * buffer alignment. Unfortunately, the hardware is not1278	 * flexible enough to do this dynamically.1279	 */1280	if (netif_running(dev))1281		fm10k_close(dev);1282 1283	fm10k_mbx_free_irq(interface);1284 1285	fm10k_clear_queueing_scheme(interface);1286 1287	/* we expect the prio_tc map to be repopulated later */1288	netdev_reset_tc(dev);1289	netdev_set_num_tc(dev, tc);1290 1291	err = fm10k_init_queueing_scheme(interface);1292	if (err)1293		goto err_queueing_scheme;1294 1295	err = fm10k_mbx_request_irq(interface);1296	if (err)1297		goto err_mbx_irq;1298 1299	err = netif_running(dev) ? fm10k_open(dev) : 0;1300	if (err)1301		goto err_open;1302 1303	/* flag to indicate SWPRI has yet to be updated */1304	set_bit(FM10K_FLAG_SWPRI_CONFIG, interface->flags);1305 1306	return 0;1307err_open:1308	fm10k_mbx_free_irq(interface);1309err_mbx_irq:1310	fm10k_clear_queueing_scheme(interface);1311err_queueing_scheme:1312	netif_device_detach(dev);1313 1314	return err;1315}1316 1317static int __fm10k_setup_tc(struct net_device *dev, enum tc_setup_type type,1318			    void *type_data)1319{1320	struct tc_mqprio_qopt *mqprio = type_data;1321 1322	if (type != TC_SETUP_QDISC_MQPRIO)1323		return -EOPNOTSUPP;1324 1325	mqprio->hw = TC_MQPRIO_HW_OFFLOAD_TCS;1326 1327	return fm10k_setup_tc(dev, mqprio->num_tc);1328}1329 1330static void fm10k_assign_l2_accel(struct fm10k_intfc *interface,1331				  struct fm10k_l2_accel *l2_accel)1332{1333	int i;1334 1335	for (i = 0; i < interface->num_rx_queues; i++) {1336		struct fm10k_ring *ring = interface->rx_ring[i];1337 1338		rcu_assign_pointer(ring->l2_accel, l2_accel);1339	}1340 1341	interface->l2_accel = l2_accel;1342}1343 1344static void *fm10k_dfwd_add_station(struct net_device *dev,1345				    struct net_device *sdev)1346{1347	struct fm10k_intfc *interface = netdev_priv(dev);1348	struct fm10k_l2_accel *l2_accel = interface->l2_accel;1349	struct fm10k_l2_accel *old_l2_accel = NULL;1350	struct fm10k_dglort_cfg dglort = { 0 };1351	struct fm10k_hw *hw = &interface->hw;1352	int size, i;1353	u16 vid, glort;1354 1355	/* The hardware supported by fm10k only filters on the destination MAC1356	 * address. In order to avoid issues we only support offloading modes1357	 * where the hardware can actually provide the functionality.1358	 */1359	if (!macvlan_supports_dest_filter(sdev))1360		return ERR_PTR(-EMEDIUMTYPE);1361 1362	/* allocate l2 accel structure if it is not available */1363	if (!l2_accel) {1364		/* verify there is enough free GLORTs to support l2_accel */1365		if (interface->glort_count < 7)1366			return ERR_PTR(-EBUSY);1367 1368		size = offsetof(struct fm10k_l2_accel, macvlan[7]);1369		l2_accel = kzalloc(size, GFP_KERNEL);1370		if (!l2_accel)1371			return ERR_PTR(-ENOMEM);1372 1373		l2_accel->size = 7;1374		l2_accel->dglort = interface->glort;1375 1376		/* update pointers */1377		fm10k_assign_l2_accel(interface, l2_accel);1378	/* do not expand if we are at our limit */1379	} else if ((l2_accel->count == FM10K_MAX_STATIONS) ||1380		   (l2_accel->count == (interface->glort_count - 1))) {1381		return ERR_PTR(-EBUSY);1382	/* expand if we have hit the size limit */1383	} else if (l2_accel->count == l2_accel->size) {1384		old_l2_accel = l2_accel;1385		size = offsetof(struct fm10k_l2_accel,1386				macvlan[(l2_accel->size * 2) + 1]);1387		l2_accel = kzalloc(size, GFP_KERNEL);1388		if (!l2_accel)1389			return ERR_PTR(-ENOMEM);1390 1391		memcpy(l2_accel, old_l2_accel,1392		       offsetof(struct fm10k_l2_accel,1393				macvlan[old_l2_accel->size]));1394 1395		l2_accel->size = (old_l2_accel->size * 2) + 1;1396 1397		/* update pointers */1398		fm10k_assign_l2_accel(interface, l2_accel);1399		kfree_rcu(old_l2_accel, rcu);1400	}1401 1402	/* add macvlan to accel table, and record GLORT for position */1403	for (i = 0; i < l2_accel->size; i++) {1404		if (!l2_accel->macvlan[i])1405			break;1406	}1407 1408	/* record station */1409	l2_accel->macvlan[i] = sdev;1410	l2_accel->count++;1411 1412	/* configure default DGLORT mapping for RSS/DCB */1413	dglort.idx = fm10k_dglort_pf_rss;1414	dglort.inner_rss = 1;1415	dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask);1416	dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask);1417	dglort.glort = interface->glort;1418	dglort.shared_l = fls(l2_accel->size);1419	hw->mac.ops.configure_dglort_map(hw, &dglort);1420 1421	/* Add rules for this specific dglort to the switch */1422	fm10k_mbx_lock(interface);1423 1424	glort = l2_accel->dglort + 1 + i;1425 1426	if (fm10k_host_mbx_ready(interface))1427		hw->mac.ops.update_xcast_mode(hw, glort,1428					      FM10K_XCAST_MODE_NONE);1429 1430	fm10k_queue_mac_request(interface, glort, sdev->dev_addr,1431				hw->mac.default_vid, true);1432 1433	for (vid = fm10k_find_next_vlan(interface, 0);1434	     vid < VLAN_N_VID;1435	     vid = fm10k_find_next_vlan(interface, vid))1436		fm10k_queue_mac_request(interface, glort, sdev->dev_addr,1437					vid, true);1438 1439	fm10k_mbx_unlock(interface);1440 1441	return sdev;1442}1443 1444static void fm10k_dfwd_del_station(struct net_device *dev, void *priv)1445{1446	struct fm10k_intfc *interface = netdev_priv(dev);1447	struct fm10k_l2_accel *l2_accel = READ_ONCE(interface->l2_accel);1448	struct fm10k_dglort_cfg dglort = { 0 };1449	struct fm10k_hw *hw = &interface->hw;1450	struct net_device *sdev = priv;1451	u16 vid, glort;1452	int i;1453 1454	if (!l2_accel)1455		return;1456 1457	/* search table for matching interface */1458	for (i = 0; i < l2_accel->size; i++) {1459		if (l2_accel->macvlan[i] == sdev)1460			break;1461	}1462 1463	/* exit if macvlan not found */1464	if (i == l2_accel->size)1465		return;1466 1467	/* Remove any rules specific to this dglort */1468	fm10k_mbx_lock(interface);1469 1470	glort = l2_accel->dglort + 1 + i;1471 1472	if (fm10k_host_mbx_ready(interface))1473		hw->mac.ops.update_xcast_mode(hw, glort,1474					      FM10K_XCAST_MODE_NONE);1475 1476	fm10k_queue_mac_request(interface, glort, sdev->dev_addr,1477				hw->mac.default_vid, false);1478 1479	for (vid = fm10k_find_next_vlan(interface, 0);1480	     vid < VLAN_N_VID;1481	     vid = fm10k_find_next_vlan(interface, vid))1482		fm10k_queue_mac_request(interface, glort, sdev->dev_addr,1483					vid, false);1484 1485	fm10k_mbx_unlock(interface);1486 1487	/* record removal */1488	l2_accel->macvlan[i] = NULL;1489	l2_accel->count--;1490 1491	/* configure default DGLORT mapping for RSS/DCB */1492	dglort.idx = fm10k_dglort_pf_rss;1493	dglort.inner_rss = 1;1494	dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask);1495	dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask);1496	dglort.glort = interface->glort;1497	dglort.shared_l = fls(l2_accel->size);1498	hw->mac.ops.configure_dglort_map(hw, &dglort);1499 1500	/* If table is empty remove it */1501	if (l2_accel->count == 0) {1502		fm10k_assign_l2_accel(interface, NULL);1503		kfree_rcu(l2_accel, rcu);1504	}1505}1506 1507static netdev_features_t fm10k_features_check(struct sk_buff *skb,1508					      struct net_device *dev,1509					      netdev_features_t features)1510{1511	if (!skb->encapsulation || fm10k_tx_encap_offload(skb))1512		return features;1513 1514	return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);1515}1516 1517static const struct net_device_ops fm10k_netdev_ops = {1518	.ndo_open		= fm10k_open,1519	.ndo_stop		= fm10k_close,1520	.ndo_validate_addr	= eth_validate_addr,1521	.ndo_start_xmit		= fm10k_xmit_frame,1522	.ndo_set_mac_address	= fm10k_set_mac,1523	.ndo_tx_timeout		= fm10k_tx_timeout,1524	.ndo_vlan_rx_add_vid	= fm10k_vlan_rx_add_vid,1525	.ndo_vlan_rx_kill_vid	= fm10k_vlan_rx_kill_vid,1526	.ndo_set_rx_mode	= fm10k_set_rx_mode,1527	.ndo_get_stats64	= fm10k_get_stats64,1528	.ndo_setup_tc		= __fm10k_setup_tc,1529	.ndo_set_vf_mac		= fm10k_ndo_set_vf_mac,1530	.ndo_set_vf_vlan	= fm10k_ndo_set_vf_vlan,1531	.ndo_set_vf_rate	= fm10k_ndo_set_vf_bw,1532	.ndo_get_vf_config	= fm10k_ndo_get_vf_config,1533	.ndo_get_vf_stats	= fm10k_ndo_get_vf_stats,1534	.ndo_dfwd_add_station	= fm10k_dfwd_add_station,1535	.ndo_dfwd_del_station	= fm10k_dfwd_del_station,1536	.ndo_features_check	= fm10k_features_check,1537};1538 1539#define DEFAULT_DEBUG_LEVEL_SHIFT 31540 1541struct net_device *fm10k_alloc_netdev(const struct fm10k_info *info)1542{1543	netdev_features_t hw_features;1544	struct fm10k_intfc *interface;1545	struct net_device *dev;1546 1547	dev = alloc_etherdev_mq(sizeof(struct fm10k_intfc), MAX_QUEUES);1548	if (!dev)1549		return NULL;1550 1551	/* set net device and ethtool ops */1552	dev->netdev_ops = &fm10k_netdev_ops;1553	fm10k_set_ethtool_ops(dev);1554 1555	/* configure default debug level */1556	interface = netdev_priv(dev);1557	interface->msg_enable = BIT(DEFAULT_DEBUG_LEVEL_SHIFT) - 1;1558 1559	/* configure default features */1560	dev->features |= NETIF_F_IP_CSUM |1561			 NETIF_F_IPV6_CSUM |1562			 NETIF_F_SG |1563			 NETIF_F_TSO |1564			 NETIF_F_TSO6 |1565			 NETIF_F_TSO_ECN |1566			 NETIF_F_RXHASH |1567			 NETIF_F_RXCSUM;1568 1569	/* Only the PF can support VXLAN and NVGRE tunnel offloads */1570	if (info->mac == fm10k_mac_pf) {1571		dev->hw_enc_features = NETIF_F_IP_CSUM |1572				       NETIF_F_TSO |1573				       NETIF_F_TSO6 |1574				       NETIF_F_TSO_ECN |1575				       NETIF_F_GSO_UDP_TUNNEL |1576				       NETIF_F_IPV6_CSUM |1577				       NETIF_F_SG;1578 1579		dev->features |= NETIF_F_GSO_UDP_TUNNEL;1580 1581		dev->udp_tunnel_nic_info = &fm10k_udp_tunnels;1582	}1583 1584	/* all features defined to this point should be changeable */1585	hw_features = dev->features;1586 1587	/* allow user to enable L2 forwarding acceleration */1588	hw_features |= NETIF_F_HW_L2FW_DOFFLOAD;1589 1590	/* configure VLAN features */1591	dev->vlan_features |= dev->features;1592 1593	/* we want to leave these both on as we cannot disable VLAN tag1594	 * insertion or stripping on the hardware since it is contained1595	 * in the FTAG and not in the frame itself.1596	 */1597	dev->features |= NETIF_F_HW_VLAN_CTAG_TX |1598			 NETIF_F_HW_VLAN_CTAG_RX |1599			 NETIF_F_HW_VLAN_CTAG_FILTER;1600 1601	dev->priv_flags |= IFF_UNICAST_FLT;1602 1603	dev->hw_features |= hw_features;1604 1605	/* MTU range: 68 - 15342 */1606	dev->min_mtu = ETH_MIN_MTU;1607	dev->max_mtu = FM10K_MAX_JUMBO_FRAME_SIZE;1608 1609	return dev;1610}1611