brintos

brintos / linux-shallow public Read only

0
0
Text · 17.3 KiB · 2fc6386 Raw
650 lines · c
1// SPDX-License-Identifier: GPL-2.02/*3 * macsonic.c4 *5 * (C) 2005 Finn Thain6 *7 * Converted to DMA API, converted to unified driver model, made it work as8 * a module again, and from the mac68k project, introduced more 32-bit cards9 * and dhd's support for 16-bit cards.10 *11 * (C) 1998 Alan Cox12 *13 * Debugging Andreas Ehliar, Michael Schmitz14 *15 * Based on code16 * (C) 1996 by Thomas Bogendoerfer (tsbogend@bigbug.franken.de)17 *18 * This driver is based on work from Andreas Busse, but most of19 * the code is rewritten.20 *21 * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de)22 *23 * A driver for the Mac onboard Sonic ethernet chip.24 *25 * 98/12/21 MSch: judged from tests on Q800, it's basically working,26 *		  but eating up both receive and transmit resources27 *		  and duplicating packets. Needs more testing.28 *29 * 99/01/03 MSch: upgraded to version 0.92 of the core driver, fixed.30 *31 * 00/10/31 sammy@oh.verio.com: Updated driver for 2.4 kernels, fixed problems32 *          on centris.33 */34 35#include <linux/kernel.h>36#include <linux/module.h>37#include <linux/types.h>38#include <linux/fcntl.h>39#include <linux/gfp.h>40#include <linux/interrupt.h>41#include <linux/ioport.h>42#include <linux/in.h>43#include <linux/string.h>44#include <linux/delay.h>45#include <linux/nubus.h>46#include <linux/errno.h>47#include <linux/netdevice.h>48#include <linux/etherdevice.h>49#include <linux/skbuff.h>50#include <linux/platform_device.h>51#include <linux/dma-mapping.h>52#include <linux/bitrev.h>53#include <linux/slab.h>54#include <linux/pgtable.h>55 56#include <asm/io.h>57#include <asm/hwtest.h>58#include <asm/dma.h>59#include <asm/macintosh.h>60#include <asm/macints.h>61#include <asm/mac_via.h>62 63#include "sonic.h"64 65/* These should basically be bus-size and endian independent (since66   the SONIC is at least smart enough that it uses the same endianness67   as the host, unlike certain less enlightened Macintosh NICs) */68#define SONIC_READ(reg) (nubus_readw(dev->base_addr + (reg * 4) \69	      + lp->reg_offset))70#define SONIC_WRITE(reg,val) (nubus_writew(val, dev->base_addr + (reg * 4) \71	      + lp->reg_offset))72 73/* For onboard SONIC */74#define ONBOARD_SONIC_REGISTERS	0x50F0A00075#define ONBOARD_SONIC_PROM_BASE	0x50f0800076 77enum macsonic_type {78	MACSONIC_DUODOCK,79	MACSONIC_APPLE,80	MACSONIC_APPLE16,81	MACSONIC_DAYNA,82	MACSONIC_DAYNALINK83};84 85/* For the built-in SONIC in the Duo Dock */86#define DUODOCK_SONIC_REGISTERS 0xe1000087#define DUODOCK_SONIC_PROM_BASE 0xe1200088 89/* For Apple-style NuBus SONIC */90#define APPLE_SONIC_REGISTERS	091#define APPLE_SONIC_PROM_BASE	0x4000092 93/* Daynalink LC SONIC */94#define DAYNALINK_PROM_BASE 0x40000095 96/* For Dayna-style NuBus SONIC (haven't seen one yet) */97#define DAYNA_SONIC_REGISTERS   0x18000098/* This is what OpenBSD says.  However, this is definitely in NuBus99   ROM space so we should be able to get it by walking the NuBus100   resource directories */101#define DAYNA_SONIC_MAC_ADDR	0xffe004102 103#define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr)104 105/*106 * For reversing the PROM address107 */108 109static inline void bit_reverse_addr(unsigned char addr[6])110{111	int i;112 113	for(i = 0; i < 6; i++)114		addr[i] = bitrev8(addr[i]);115}116 117static int macsonic_open(struct net_device* dev)118{119	int retval;120 121	retval = request_irq(dev->irq, sonic_interrupt, 0, "sonic", dev);122	if (retval) {123		printk(KERN_ERR "%s: unable to get IRQ %d.\n",124				dev->name, dev->irq);125		goto err;126	}127	/* Under the A/UX interrupt scheme, the onboard SONIC interrupt gets128	 * moved from level 2 to level 3. Unfortunately we still get some129	 * level 2 interrupts so register the handler for both.130	 */131	if (dev->irq == IRQ_AUTO_3) {132		retval = request_irq(IRQ_NUBUS_9, sonic_interrupt, 0,133				     "sonic", dev);134		if (retval) {135			printk(KERN_ERR "%s: unable to get IRQ %d.\n",136					dev->name, IRQ_NUBUS_9);137			goto err_irq;138		}139	}140	retval = sonic_open(dev);141	if (retval)142		goto err_irq_nubus;143	return 0;144 145err_irq_nubus:146	if (dev->irq == IRQ_AUTO_3)147		free_irq(IRQ_NUBUS_9, dev);148err_irq:149	free_irq(dev->irq, dev);150err:151	return retval;152}153 154static int macsonic_close(struct net_device* dev)155{156	int err;157	err = sonic_close(dev);158	free_irq(dev->irq, dev);159	if (dev->irq == IRQ_AUTO_3)160		free_irq(IRQ_NUBUS_9, dev);161	return err;162}163 164static const struct net_device_ops macsonic_netdev_ops = {165	.ndo_open		= macsonic_open,166	.ndo_stop		= macsonic_close,167	.ndo_start_xmit		= sonic_send_packet,168	.ndo_set_rx_mode	= sonic_multicast_list,169	.ndo_tx_timeout		= sonic_tx_timeout,170	.ndo_get_stats		= sonic_get_stats,171	.ndo_validate_addr	= eth_validate_addr,172	.ndo_set_mac_address	= eth_mac_addr,173};174 175static int macsonic_init(struct net_device *dev)176{177	struct sonic_local* lp = netdev_priv(dev);178	int err = sonic_alloc_descriptors(dev);179 180	if (err)181		return err;182 183	dev->netdev_ops = &macsonic_netdev_ops;184	dev->watchdog_timeo = TX_TIMEOUT;185 186	/*187	 * clear tally counter188	 */189	SONIC_WRITE(SONIC_CRCT, 0xffff);190	SONIC_WRITE(SONIC_FAET, 0xffff);191	SONIC_WRITE(SONIC_MPT, 0xffff);192 193	return 0;194}195 196#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \197                          memcmp(mac, "\x00\xA0\x40", 3) && \198                          memcmp(mac, "\x00\x80\x19", 3) && \199                          memcmp(mac, "\x00\x05\x02", 3))200 201static void mac_onboard_sonic_ethernet_addr(struct net_device *dev)202{203	struct sonic_local *lp = netdev_priv(dev);204	const int prom_addr = ONBOARD_SONIC_PROM_BASE;205	unsigned short val;206	u8 addr[ETH_ALEN];207 208	/*209	 * On NuBus boards we can sometimes look in the ROM resources.210	 * No such luck for comm-slot/onboard.211	 * On the PowerBook 520, the PROM base address is a mystery.212	 */213	if (hwreg_present((void *)prom_addr)) {214		int i;215 216		for (i = 0; i < 6; i++)217			addr[i] = SONIC_READ_PROM(i);218		eth_hw_addr_set(dev, addr);219		if (!INVALID_MAC(dev->dev_addr))220			return;221 222		/*223		 * Most of the time, the address is bit-reversed. The NetBSD224		 * source has a rather long and detailed historical account of225		 * why this is so.226		 */227		bit_reverse_addr(addr);228		eth_hw_addr_set(dev, addr);229		if (!INVALID_MAC(dev->dev_addr))230			return;231 232		/*233		 * If we still have what seems to be a bogus address, we'll234		 * look in the CAM. The top entry should be ours.235		 */236		printk(KERN_WARNING "macsonic: MAC address in PROM seems "237		                    "to be invalid, trying CAM\n");238	} else {239		printk(KERN_WARNING "macsonic: cannot read MAC address from "240		                    "PROM, trying CAM\n");241	}242 243	/* This only works if MacOS has already initialized the card. */244 245	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);246	SONIC_WRITE(SONIC_CEP, 15);247 248	val = SONIC_READ(SONIC_CAP2);249	addr[5] = val >> 8;250	addr[4] = val & 0xff;251	val = SONIC_READ(SONIC_CAP1);252	addr[3] = val >> 8;253	addr[2] = val & 0xff;254	val = SONIC_READ(SONIC_CAP0);255	addr[1] = val >> 8;256	addr[0] = val & 0xff;257	eth_hw_addr_set(dev, addr);258 259	if (!INVALID_MAC(dev->dev_addr))260		return;261 262	/* Still nonsense ... messed up someplace! */263 264	printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 "265	                    "seems invalid, will use a random MAC\n");266	eth_hw_addr_random(dev);267}268 269static int mac_onboard_sonic_probe(struct net_device *dev)270{271	struct sonic_local* lp = netdev_priv(dev);272	int sr;273	bool commslot = macintosh_config->expansion_type == MAC_EXP_PDS_COMM;274 275	/* Bogus probing, on the models which may or may not have276	   Ethernet (BTW, the Ethernet *is* always at the same277	   address, and nothing else lives there, at least if Apple's278	   documentation is to be believed) */279	if (commslot || macintosh_config->ident == MAC_MODEL_C610) {280		int card_present;281 282		card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS);283		if (!card_present) {284			pr_info("Onboard/comm-slot SONIC not found\n");285			return -ENODEV;286		}287	}288 289	/* Danger!  My arms are flailing wildly!  You *must* set lp->reg_offset290	 * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */291	dev->base_addr = ONBOARD_SONIC_REGISTERS;292	if (via_alt_mapping)293		dev->irq = IRQ_AUTO_3;294	else295		dev->irq = IRQ_NUBUS_9;296 297	/* The PowerBook's SONIC is 16 bit always. */298	if (macintosh_config->ident == MAC_MODEL_PB520) {299		lp->reg_offset = 0;300		lp->dma_bitmode = SONIC_BITMODE16;301	} else if (commslot) {302		/* Some of the comm-slot cards are 16 bit.  But some303		   of them are not.  The 32-bit cards use offset 2 and304		   have known revisions, we try reading the revision305		   register at offset 2, if we don't get a known revision306		   we assume 16 bit at offset 0.  */307		lp->reg_offset = 2;308		lp->dma_bitmode = SONIC_BITMODE16;309 310		sr = SONIC_READ(SONIC_SR);311		if (sr == 0x0004 || sr == 0x0006 || sr == 0x0100 || sr == 0x0101)312			/* 83932 is 0x0004 or 0x0006, 83934 is 0x0100 or 0x0101 */313			lp->dma_bitmode = SONIC_BITMODE32;314		else {315			lp->dma_bitmode = SONIC_BITMODE16;316			lp->reg_offset = 0;317		}318	} else {319		/* All onboard cards are at offset 2 with 32 bit DMA. */320		lp->reg_offset = 2;321		lp->dma_bitmode = SONIC_BITMODE32;322	}323 324	pr_info("Onboard/comm-slot SONIC, revision 0x%04x, %d bit DMA, register offset %d\n",325		SONIC_READ(SONIC_SR), lp->dma_bitmode ? 32 : 16,326		lp->reg_offset);327 328	/* This is sometimes useful to find out how MacOS configured the card */329	pr_debug("%s: DCR=0x%04x, DCR2=0x%04x\n", __func__,330		 SONIC_READ(SONIC_DCR) & 0xffff,331		 SONIC_READ(SONIC_DCR2) & 0xffff);332 333	/* Software reset, then initialize control registers. */334	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);335 336	SONIC_WRITE(SONIC_DCR, SONIC_DCR_EXBUS | SONIC_DCR_BMS |337	                       SONIC_DCR_RFT1  | SONIC_DCR_TFT0 |338	                       (lp->dma_bitmode ? SONIC_DCR_DW : 0));339 340	/* This *must* be written back to in order to restore the341	 * extended programmable output bits, as it may not have been342	 * initialised since the hardware reset. */343	SONIC_WRITE(SONIC_DCR2, 0);344 345	/* Clear *and* disable interrupts to be on the safe side */346	SONIC_WRITE(SONIC_IMR, 0);347	SONIC_WRITE(SONIC_ISR, 0x7fff);348 349	/* Now look for the MAC address. */350	mac_onboard_sonic_ethernet_addr(dev);351 352	pr_info("SONIC ethernet @%08lx, MAC %pM, IRQ %d\n",353		dev->base_addr, dev->dev_addr, dev->irq);354 355	/* Shared init code */356	return macsonic_init(dev);357}358 359static int mac_sonic_nubus_ethernet_addr(struct net_device *dev,360					 unsigned long prom_addr, int id)361{362	u8 addr[ETH_ALEN];363	int i;364 365	for(i = 0; i < 6; i++)366		addr[i] = SONIC_READ_PROM(i);367 368	/* Some of the addresses are bit-reversed */369	if (id != MACSONIC_DAYNA)370		bit_reverse_addr(addr);371	eth_hw_addr_set(dev, addr);372 373	return 0;374}375 376static int macsonic_ident(struct nubus_rsrc *fres)377{378	if (fres->dr_hw == NUBUS_DRHW_ASANTE_LC &&379	    fres->dr_sw == NUBUS_DRSW_SONIC_LC)380		return MACSONIC_DAYNALINK;381	if (fres->dr_hw == NUBUS_DRHW_SONIC &&382	    fres->dr_sw == NUBUS_DRSW_APPLE) {383		/* There has to be a better way to do this... */384		if (strstr(fres->board->name, "DuoDock"))385			return MACSONIC_DUODOCK;386		else387			return MACSONIC_APPLE;388	}389 390	if (fres->dr_hw == NUBUS_DRHW_SMC9194 &&391	    fres->dr_sw == NUBUS_DRSW_DAYNA)392		return MACSONIC_DAYNA;393 394	if (fres->dr_hw == NUBUS_DRHW_APPLE_SONIC_LC &&395	    fres->dr_sw == 0) { /* huh? */396		return MACSONIC_APPLE16;397	}398	return -1;399}400 401static int mac_sonic_nubus_probe_board(struct nubus_board *board, int id,402				       struct net_device *dev)403{404	struct sonic_local* lp = netdev_priv(dev);405	unsigned long base_addr, prom_addr;406	u16 sonic_dcr;407	int reg_offset, dma_bitmode;408 409	switch (id) {410	case MACSONIC_DUODOCK:411		base_addr = board->slot_addr + DUODOCK_SONIC_REGISTERS;412		prom_addr = board->slot_addr + DUODOCK_SONIC_PROM_BASE;413		sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 |414		            SONIC_DCR_TFT0;415		reg_offset = 2;416		dma_bitmode = SONIC_BITMODE32;417		break;418	case MACSONIC_APPLE:419		base_addr = board->slot_addr + APPLE_SONIC_REGISTERS;420		prom_addr = board->slot_addr + APPLE_SONIC_PROM_BASE;421		sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0;422		reg_offset = 0;423		dma_bitmode = SONIC_BITMODE32;424		break;425	case MACSONIC_APPLE16:426		base_addr = board->slot_addr + APPLE_SONIC_REGISTERS;427		prom_addr = board->slot_addr + APPLE_SONIC_PROM_BASE;428		sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |429		            SONIC_DCR_PO1 | SONIC_DCR_BMS;430		reg_offset = 0;431		dma_bitmode = SONIC_BITMODE16;432		break;433	case MACSONIC_DAYNALINK:434		base_addr = board->slot_addr + APPLE_SONIC_REGISTERS;435		prom_addr = board->slot_addr + DAYNALINK_PROM_BASE;436		sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |437		            SONIC_DCR_PO1 | SONIC_DCR_BMS;438		reg_offset = 0;439		dma_bitmode = SONIC_BITMODE16;440		break;441	case MACSONIC_DAYNA:442		base_addr = board->slot_addr + DAYNA_SONIC_REGISTERS;443		prom_addr = board->slot_addr + DAYNA_SONIC_MAC_ADDR;444		sonic_dcr = SONIC_DCR_BMS |445		            SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1;446		reg_offset = 0;447		dma_bitmode = SONIC_BITMODE16;448		break;449	default:450		printk(KERN_ERR "macsonic: WTF, id is %d\n", id);451		return -ENODEV;452	}453 454	/* Danger!  My arms are flailing wildly!  You *must* set lp->reg_offset455	 * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */456	dev->base_addr = base_addr;457	lp->reg_offset = reg_offset;458	lp->dma_bitmode = dma_bitmode;459	dev->irq = SLOT2IRQ(board->slot);460 461	dev_info(&board->dev, "%s, revision 0x%04x, %d bit DMA, register offset %d\n",462		 board->name, SONIC_READ(SONIC_SR),463		 lp->dma_bitmode ? 32 : 16, lp->reg_offset);464 465	/* This is sometimes useful to find out how MacOS configured the card */466	dev_dbg(&board->dev, "%s: DCR=0x%04x, DCR2=0x%04x\n", __func__,467		SONIC_READ(SONIC_DCR) & 0xffff,468		SONIC_READ(SONIC_DCR2) & 0xffff);469 470	/* Software reset, then initialize control registers. */471	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);472	SONIC_WRITE(SONIC_DCR, sonic_dcr | (dma_bitmode ? SONIC_DCR_DW : 0));473	/* This *must* be written back to in order to restore the474	 * extended programmable output bits, since it may not have been475	 * initialised since the hardware reset. */476	SONIC_WRITE(SONIC_DCR2, 0);477 478	/* Clear *and* disable interrupts to be on the safe side */479	SONIC_WRITE(SONIC_IMR, 0);480	SONIC_WRITE(SONIC_ISR, 0x7fff);481 482	/* Now look for the MAC address. */483	if (mac_sonic_nubus_ethernet_addr(dev, prom_addr, id) != 0)484		return -ENODEV;485 486	dev_info(&board->dev, "SONIC ethernet @%08lx, MAC %pM, IRQ %d\n",487		 dev->base_addr, dev->dev_addr, dev->irq);488 489	/* Shared init code */490	return macsonic_init(dev);491}492 493static int mac_sonic_platform_probe(struct platform_device *pdev)494{495	struct net_device *dev;496	struct sonic_local *lp;497	int err;498 499	dev = alloc_etherdev(sizeof(struct sonic_local));500	if (!dev)501		return -ENOMEM;502 503	lp = netdev_priv(dev);504	lp->device = &pdev->dev;505	SET_NETDEV_DEV(dev, &pdev->dev);506	platform_set_drvdata(pdev, dev);507 508	err = mac_onboard_sonic_probe(dev);509	if (err)510		goto out;511 512	sonic_msg_init(dev);513 514	err = register_netdev(dev);515	if (err)516		goto undo_probe;517 518	return 0;519 520undo_probe:521	dma_free_coherent(lp->device,522			  SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),523			  lp->descriptors, lp->descriptors_laddr);524out:525	free_netdev(dev);526 527	return err;528}529 530MODULE_DESCRIPTION("Macintosh SONIC ethernet driver");531MODULE_ALIAS("platform:macsonic");532 533#include "sonic.c"534 535static void mac_sonic_platform_remove(struct platform_device *pdev)536{537	struct net_device *dev = platform_get_drvdata(pdev);538	struct sonic_local* lp = netdev_priv(dev);539 540	unregister_netdev(dev);541	dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),542	                  lp->descriptors, lp->descriptors_laddr);543	free_netdev(dev);544}545 546static struct platform_driver mac_sonic_platform_driver = {547	.probe  = mac_sonic_platform_probe,548	.remove_new = mac_sonic_platform_remove,549	.driver = {550		.name = "macsonic",551	},552};553 554static int mac_sonic_nubus_probe(struct nubus_board *board)555{556	struct net_device *ndev;557	struct sonic_local *lp;558	struct nubus_rsrc *fres;559	int id = -1;560	int err;561 562	/* The platform driver will handle a PDS or Comm Slot card (even if563	 * it has a pseudoslot declaration ROM).564	 */565	if (macintosh_config->expansion_type == MAC_EXP_PDS_COMM)566		return -ENODEV;567 568	for_each_board_func_rsrc(board, fres) {569		if (fres->category != NUBUS_CAT_NETWORK ||570		    fres->type != NUBUS_TYPE_ETHERNET)571			continue;572 573		id = macsonic_ident(fres);574		if (id != -1)575			break;576	}577	if (!fres)578		return -ENODEV;579 580	ndev = alloc_etherdev(sizeof(struct sonic_local));581	if (!ndev)582		return -ENOMEM;583 584	lp = netdev_priv(ndev);585	lp->device = &board->dev;586	SET_NETDEV_DEV(ndev, &board->dev);587 588	err = mac_sonic_nubus_probe_board(board, id, ndev);589	if (err)590		goto out;591 592	sonic_msg_init(ndev);593 594	err = register_netdev(ndev);595	if (err)596		goto undo_probe;597 598	nubus_set_drvdata(board, ndev);599 600	return 0;601 602undo_probe:603	dma_free_coherent(lp->device,604			  SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),605			  lp->descriptors, lp->descriptors_laddr);606out:607	free_netdev(ndev);608	return err;609}610 611static void mac_sonic_nubus_remove(struct nubus_board *board)612{613	struct net_device *ndev = nubus_get_drvdata(board);614	struct sonic_local *lp = netdev_priv(ndev);615 616	unregister_netdev(ndev);617	dma_free_coherent(lp->device,618			  SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),619			  lp->descriptors, lp->descriptors_laddr);620	free_netdev(ndev);621}622 623static struct nubus_driver mac_sonic_nubus_driver = {624	.probe  = mac_sonic_nubus_probe,625	.remove = mac_sonic_nubus_remove,626	.driver = {627		.name = "macsonic-nubus",628		.owner = THIS_MODULE,629	},630};631 632static int perr, nerr;633 634static int __init mac_sonic_init(void)635{636	perr = platform_driver_register(&mac_sonic_platform_driver);637	nerr = nubus_driver_register(&mac_sonic_nubus_driver);638	return 0;639}640module_init(mac_sonic_init);641 642static void __exit mac_sonic_exit(void)643{644	if (!perr)645		platform_driver_unregister(&mac_sonic_platform_driver);646	if (!nerr)647		nubus_driver_unregister(&mac_sonic_nubus_driver);648}649module_exit(mac_sonic_exit);650