748 lines · c
1/* SPDX-License-Identifier: GPL-2.0-or-later */2/******************************************************************************3 *4 * (C)Copyright 1998,1999 SysKonnect,5 * a business unit of Schneider & Koch & Co. Datensysteme GmbH.6 *7 * The information in this file is provided "AS IS" without warranty.8 *9 ******************************************************************************/10 11#ifndef _CMTDEF_12#define _CMTDEF_13 14/* **************************************************************** */15 16/*17 * implementation specific constants18 * MODIIFY THE FOLLOWING THREE DEFINES19 */20#define AMDPLC /* if Amd PLC chip used */21#ifdef CONC22#define NUMPHYS 12 /* 2 for SAS or DAS, more for Concentrator */23#else24#ifdef CONC_II25#define NUMPHYS 24 /* 2 for SAS or DAS, more for Concentrator */26#else27#define NUMPHYS 2 /* 2 for SAS or DAS, more for Concentrator */28#endif29#endif30#define NUMMACS 1 /* only 1 supported at the moment */31#define NUMPATHS 2 /* primary and secondary path supported */32 33/*34 * DO NOT MODIFY BEYOND THIS POINT35 */36 37/* **************************************************************** */38 39#if NUMPHYS > 240#define CONCENTRATOR41#endif42 43/*44 * Definitions for comfortable LINT usage45 */46#ifdef lint47#define LINT_USE(x) (x)=(x)48#else49#define LINT_USE(x)50#endif51 52#ifdef DEBUG53#define DB_PR(flag, fmt, ...) \54 do { if (flag) printf(fmt "\n", ##__VA_ARGS__); } while (0)55#else56#define DB_PR(flag, fmt, ...) no_printk(fmt "\n", ##__VA_ARGS__)57 58#endif59 60#ifdef DEBUG_BRD61#define DB_TEST (smc->debug)62#else63#define DB_TEST (debug)64#endif65 66#define DB_ECM(fmt, ...) \67 DB_PR((DB_TEST).d_smt & 1, fmt, ##__VA_ARGS__)68#define DB_ECMN(n, fmt, ...) \69 DB_PR((DB_TEST).d_ecm >= (n), fmt, ##__VA_ARGS__)70#define DB_RMT(fmt, ...) \71 DB_PR((DB_TEST).d_smt & 2, fmt, ##__VA_ARGS__)72#define DB_RMTN(n, fmt, ...) \73 DB_PR((DB_TEST).d_rmt >= (n), fmt, ##__VA_ARGS__)74#define DB_CFM(fmt, ...) \75 DB_PR((DB_TEST).d_smt & 4, fmt, ##__VA_ARGS__)76#define DB_CFMN(n, fmt, ...) \77 DB_PR((DB_TEST).d_cfm >= (n), fmt, ##__VA_ARGS__)78#define DB_PCM(fmt, ...) \79 DB_PR((DB_TEST).d_smt & 8, fmt, ##__VA_ARGS__)80#define DB_PCMN(n, fmt, ...) \81 DB_PR((DB_TEST).d_pcm >= (n), fmt, ##__VA_ARGS__)82#define DB_SMT(fmt, ...) \83 DB_PR((DB_TEST).d_smtf, fmt, ##__VA_ARGS__)84#define DB_SMTN(n, fmt, ...) \85 DB_PR((DB_TEST).d_smtf >= (n), fmt, ##__VA_ARGS__)86#define DB_SBA(fmt, ...) \87 DB_PR((DB_TEST).d_sba, fmt, ##__VA_ARGS__)88#define DB_SBAN(n, fmt, ...) \89 DB_PR((DB_TEST).d_sba >= (n), fmt, ##__VA_ARGS__)90#define DB_ESS(fmt, ...) \91 DB_PR((DB_TEST).d_ess, fmt, ##__VA_ARGS__)92#define DB_ESSN(n, fmt, ...) \93 DB_PR((DB_TEST).d_ess >= (n), fmt, ##__VA_ARGS__)94 95#ifndef SS_NOT_DS96#define SK_LOC_DECL(type,var) type var97#else98#define SK_LOC_DECL(type,var) static type var99#endif100/*101 * PHYs and PORTS102 * Note: Don't touch the definition of PA and PB. Those might be used103 * by some "for" loops.104 */105#define PA 0106#define PB 1107#if defined(SUPERNET_3) || defined(CONC_II)108/*109 * The port indices have to be different,110 * because the MAC output goes through the 2. PLC111 * Conc II: It has to be the first port in the row.112 */113#define PS 0 /* Internal PLC which is the same as PA */114#else115#define PS 1116#endif117#define PM 2 /* PM .. PA+NUM_PHYS-1 */118 119/*120 * PHY types - as in path descriptor 'fddiPHYType'121 */122#define TA 0 /* A port */123#define TB 1 /* B port */124#define TS 2 /* S port */125#define TM 3 /* M port */126#define TNONE 4127 128 129/*130 * indexes in MIB131 */132#define INDEX_MAC 1133#define INDEX_PATH 1134#define INDEX_PORT 1135 136 137/*138 * policies139 */140#define POLICY_AA (1<<0) /* reject AA */141#define POLICY_AB (1<<1) /* reject AB */142#define POLICY_AS (1<<2) /* reject AS */143#define POLICY_AM (1<<3) /* reject AM */144#define POLICY_BA (1<<4) /* reject BA */145#define POLICY_BB (1<<5) /* reject BB */146#define POLICY_BS (1<<6) /* reject BS */147#define POLICY_BM (1<<7) /* reject BM */148#define POLICY_SA (1<<8) /* reject SA */149#define POLICY_SB (1<<9) /* reject SB */150#define POLICY_SS (1<<10) /* reject SS */151#define POLICY_SM (1<<11) /* reject SM */152#define POLICY_MA (1<<12) /* reject MA */153#define POLICY_MB (1<<13) /* reject MB */154#define POLICY_MS (1<<14) /* reject MS */155#define POLICY_MM (1<<15) /* reject MM */156 157/*158 * commands159 */160 161/*162 * EVENTS163 * event classes164 */165#define EVENT_ECM 1 /* event class ECM */166#define EVENT_CFM 2 /* event class CFM */167#define EVENT_RMT 3 /* event class RMT */168#define EVENT_SMT 4 /* event class SMT */169#define EVENT_PCM 5 /* event class PCM */170#define EVENT_PCMA 5 /* event class PCMA */171#define EVENT_PCMB 6 /* event class PCMB */172 173/* WARNING :174 * EVENT_PCM* must be last in the above list175 * if more than two ports are used, EVENT_PCM .. EVENT_PCMA+NUM_PHYS-1176 * are used !177 */178 179#define EV_TOKEN(class,event) (((u_long)(class)<<16L)|((u_long)(event)))180#define EV_T_CLASS(token) ((int)((token)>>16)&0xffff)181#define EV_T_EVENT(token) ((int)(token)&0xffff)182 183/*184 * ECM events185 */186#define EC_CONNECT 1 /* connect request */187#define EC_DISCONNECT 2 /* disconnect request */188#define EC_TRACE_PROP 3 /* trace propagation */189#define EC_PATH_TEST 4 /* path test */190#define EC_TIMEOUT_TD 5 /* timer TD_min */191#define EC_TIMEOUT_TMAX 6 /* timer trace_max */192#define EC_TIMEOUT_IMAX 7 /* timer I_max */193#define EC_TIMEOUT_INMAX 8 /* timer IN_max */194#define EC_TEST_DONE 9 /* path test done */195 196/*197 * CFM events198 */199#define CF_LOOP 1 /* cf_loop flag from PCM */200#define CF_LOOP_A 1 /* cf_loop flag from PCM */201#define CF_LOOP_B 2 /* cf_loop flag from PCM */202#define CF_JOIN 3 /* cf_join flag from PCM */203#define CF_JOIN_A 3 /* cf_join flag from PCM */204#define CF_JOIN_B 4 /* cf_join flag from PCM */205 206/*207 * PCM events208 */209#define PC_START 1210#define PC_STOP 2211#define PC_LOOP 3212#define PC_JOIN 4213#define PC_SIGNAL 5214#define PC_REJECT 6215#define PC_MAINT 7216#define PC_TRACE 8217#define PC_PDR 9218#define PC_ENABLE 10219#define PC_DISABLE 11220 221/*222 * must be ordered as in LineStateType223 */224#define PC_QLS 12225#define PC_ILS 13226#define PC_MLS 14227#define PC_HLS 15228#define PC_LS_PDR 16229#define PC_LS_NONE 17230#define LS2MIB(x) ((x)-PC_QLS)231#define MIB2LS(x) ((x)+PC_QLS)232 233#define PC_TIMEOUT_TB_MAX 18 /* timer TB_max */234#define PC_TIMEOUT_TB_MIN 19 /* timer TB_min */235#define PC_TIMEOUT_C_MIN 20 /* timer C_Min */236#define PC_TIMEOUT_T_OUT 21 /* timer T_Out */237#define PC_TIMEOUT_TL_MIN 22 /* timer TL_Min */238#define PC_TIMEOUT_T_NEXT 23 /* timer t_next[] */239#define PC_TIMEOUT_LCT 24240#define PC_NSE 25 /* NOISE hardware timer */241#define PC_LEM 26 /* LEM done */242 243/*244 * RMT events meaning from245 */246#define RM_RING_OP 1 /* ring operational MAC */247#define RM_RING_NON_OP 2 /* ring not operational MAC */248#define RM_MY_BEACON 3 /* recvd my beacon MAC */249#define RM_OTHER_BEACON 4 /* recvd other beacon MAC */250#define RM_MY_CLAIM 5 /* recvd my claim MAC */251#define RM_TRT_EXP 6 /* TRT exp MAC */252#define RM_VALID_CLAIM 7 /* claim from dup addr MAC */253#define RM_JOIN 8 /* signal rm_join CFM */254#define RM_LOOP 9 /* signal rm_loop CFM */255#define RM_DUP_ADDR 10 /* dup_addr_test hange SMT-NIF */256#define RM_ENABLE_FLAG 11 /* enable flag */257 258#define RM_TIMEOUT_NON_OP 12 /* timeout T_Non_OP */259#define RM_TIMEOUT_T_STUCK 13 /* timeout T_Stuck */260#define RM_TIMEOUT_ANNOUNCE 14 /* timeout T_Announce */261#define RM_TIMEOUT_T_DIRECT 15 /* timeout T_Direct */262#define RM_TIMEOUT_D_MAX 16 /* timeout D_Max */263#define RM_TIMEOUT_POLL 17 /* claim/beacon poller */264#define RM_TX_STATE_CHANGE 18 /* To restart timer for D_Max */265 266/*267 * SMT events268 */269#define SM_TIMER 1 /* timer */270#define SM_FAST 2 /* smt_force_irq */271 272/* PC modes */273#define PM_NONE 0274#define PM_PEER 1275#define PM_TREE 2276 277/*278 * PCM withhold codes279 * MIB PC-WithholdType ENUM280 */281#define PC_WH_NONE 0 /* ok */282#define PC_WH_M_M 1 /* M to M */283#define PC_WH_OTHER 2 /* other incompatible phys */284#define PC_WH_PATH 3 /* path not available */285/*286 * LCT duration287 */288#define LC_SHORT 1 /* short LCT */289#define LC_MEDIUM 2 /* medium LCT */290#define LC_LONG 3 /* long LCT */291#define LC_EXTENDED 4 /* extended LCT */292 293/*294 * path_test values295 */296#define PT_NONE 0297#define PT_TESTING 1 /* test is running */298#define PT_PASSED 2 /* test passed */299#define PT_FAILED 3 /* test failed */300#define PT_PENDING 4 /* path test follows */301#define PT_EXITING 5 /* disconnected while in trace/leave */302 303/*304 * duplicate address test305 * MIB DupAddressTest ENUM306 */307#define DA_NONE 0 /* */308#define DA_PASSED 1 /* test passed */309#define DA_FAILED 2 /* test failed */310 311 312/*313 * optical bypass314 */315#define BP_DEINSERT 0 /* disable bypass */316#define BP_INSERT 1 /* enable bypass */317 318/*319 * ODL enable/disable320 */321#define PM_TRANSMIT_DISABLE 0 /* disable xmit */322#define PM_TRANSMIT_ENABLE 1 /* enable xmit */323 324/*325 * parameter for config_mux326 * note : number is index in config_endec table !327 */328#define MUX_THRUA 0 /* through A */329#define MUX_THRUB 1 /* through B */330#define MUX_WRAPA 2 /* wrap A */331#define MUX_WRAPB 3 /* wrap B */332#define MUX_ISOLATE 4 /* isolated */333#define MUX_WRAPS 5 /* SAS */334 335/*336 * MAC control337 */338#define MA_RESET 0339#define MA_BEACON 1340#define MA_CLAIM 2341#define MA_DIRECTED 3 /* directed beacon */342#define MA_TREQ 4 /* change T_Req */343#define MA_OFFLINE 5 /* switch MAC to offline */344 345 346/*347 * trace prop348 * bit map for trace propagation349 */350#define ENTITY_MAC (NUMPHYS)351#define ENTITY_PHY(p) (p)352#define ENTITY_BIT(m) (1<<(m))353 354/*355 * Resource Tag Types356 */357#define PATH_ISO 0 /* isolated */358#define PATH_PRIM 3 /* primary path */359#define PATH_THRU 5 /* through path */360 361#define RES_MAC 2 /* resource type MAC */362#define RES_PORT 4 /* resource type PORT */363 364 365/*366 * CFM state367 * oops: MUST MATCH CF-StateType in SMT7.2 !368 */369#define SC0_ISOLATED 0 /* isolated */370#define SC1_WRAP_A 5 /* wrap A (not used) */371#define SC2_WRAP_B 6 /* wrap B (not used) */372#define SC4_THRU_A 12 /* through A */373#define SC5_THRU_B 7 /* through B (used in SMT 6.2) */374#define SC7_WRAP_S 8 /* SAS (not used) */375#define SC9_C_WRAP_A 9 /* c wrap A */376#define SC10_C_WRAP_B 10 /* c wrap B */377#define SC11_C_WRAP_S 11 /* c wrap S */378 379/*380 * convert MIB time in units of 80nS to uS381 */382#define MIB2US(t) ((t)/12)383#define SEC2MIB(s) ((s)*12500000L)384/*385 * SMT timer386 */387struct smt_timer {388 struct smt_timer *tm_next ; /* linked list */389 struct s_smc *tm_smc ; /* pointer to context */390 u_long tm_delta ; /* delta time */391 u_long tm_token ; /* token value */392 u_short tm_active ; /* flag : active/inactive */393 u_short tm_pad ; /* pad field */394} ;395 396/*397 * communication structures398 */399struct mac_parameter {400 u_long t_neg ; /* T_Neg parameter */401 u_long t_pri ; /* T_Pri register in MAC */402} ;403 404/*405 * MAC counters406 */407struct mac_counter {408 u_long mac_nobuf_counter ; /* MAC SW counter: no buffer */409 u_long mac_r_restart_counter ; /* MAC SW counter: rx restarted */410} ;411 412/*413 * para struct context for SMT parameters414 */415struct s_pcon {416 int pc_len ;417 int pc_err ;418 int pc_badset ;419 void *pc_p ;420} ;421 422/*423 * link error monitor424 */425#define LEM_AVG 5426struct lem_counter {427#ifdef AM29K428 int lem_on ;429 u_long lem_errors ;430 u_long lem_symbols ;431 u_long lem_tsymbols ;432 int lem_s_count ;433 int lem_n_s ;434 int lem_values ;435 int lem_index ;436 int lem_avg_ber[LEM_AVG] ;437 int lem_sum ;438#else439 u_short lem_float_ber ; /* 10E-nn bit error rate */440 u_long lem_errors ; /* accumulated error count */441 u_short lem_on ;442#endif443} ;444 445#define NUMBITS 10446 447#ifdef AMDPLC448 449/*450 * PLC state table451 */452struct s_plc {453 u_short p_state ; /* current state */454 u_short p_bits ; /* number of bits to send */455 u_short p_start ; /* first bit pos */456 u_short p_pad ; /* padding for alignment */457 u_long soft_err ; /* error counter */458 u_long parity_err ; /* error counter */459 u_long ebuf_err ; /* error counter */460 u_long ebuf_cont ; /* continuous error counter */461 u_long phyinv ; /* error counter */462 u_long vsym_ctr ; /* error counter */463 u_long mini_ctr ; /* error counter */464 u_long tpc_exp ; /* error counter */465 u_long np_err ; /* error counter */466 u_long b_pcs ; /* error counter */467 u_long b_tpc ; /* error counter */468 u_long b_tne ; /* error counter */469 u_long b_qls ; /* error counter */470 u_long b_ils ; /* error counter */471 u_long b_hls ; /* error counter */472} ;473#endif474 475#ifdef PROTOTYP_INC476#include "fddi/driver.pro"477#else /* PROTOTYP_INC */478/*479 * function prototypes480 */481#include "mbuf.h" /* Type definitions for MBUFs */482#include "smtstate.h" /* struct smt_state */483 484void hwt_restart(struct s_smc *smc); /* hwt.c */485SMbuf *smt_build_frame(struct s_smc *smc, int class, int type,486 int length); /* smt.c */487SMbuf *smt_get_mbuf(struct s_smc *smc); /* drvsr.c */488void *sm_to_para(struct s_smc *smc, struct smt_header *sm,489 int para); /* smt.c */490 491#ifndef SK_UNUSED492#define SK_UNUSED(var) (void)(var)493#endif494 495void queue_event(struct s_smc *smc, int class, int event);496void ecm(struct s_smc *smc, int event);497void ecm_init(struct s_smc *smc);498void rmt(struct s_smc *smc, int event);499void rmt_init(struct s_smc *smc);500void pcm(struct s_smc *smc, const int np, int event);501void pcm_init(struct s_smc *smc);502void cfm(struct s_smc *smc, int event);503void cfm_init(struct s_smc *smc);504void smt_timer_start(struct s_smc *smc, struct smt_timer *timer, u_long time,505 u_long token);506void smt_timer_stop(struct s_smc *smc, struct smt_timer *timer);507void pcm_status_state(struct s_smc *smc, int np, int *type, int *state,508 int *remote, int *mac);509void plc_config_mux(struct s_smc *smc, int mux);510void sm_lem_evaluate(struct s_smc *smc);511void mac_update_counter(struct s_smc *smc);512void sm_ma_control(struct s_smc *smc, int mode);513void sm_mac_check_beacon_claim(struct s_smc *smc);514void config_mux(struct s_smc *smc, int mux);515void smt_agent_init(struct s_smc *smc);516void smt_timer_init(struct s_smc *smc);517void smt_received_pack(struct s_smc *smc, SMbuf *mb, int fs);518void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para,519 int index, int local);520void smt_swap_para(struct smt_header *sm, int len, int direction);521void ev_init(struct s_smc *smc);522void hwt_init(struct s_smc *smc);523u_long hwt_read(struct s_smc *smc);524void hwt_stop(struct s_smc *smc);525void hwt_start(struct s_smc *smc, u_long time);526void smt_send_mbuf(struct s_smc *smc, SMbuf *mb, int fc);527void smt_free_mbuf(struct s_smc *smc, SMbuf *mb);528void sm_pm_bypass_req(struct s_smc *smc, int mode);529void rmt_indication(struct s_smc *smc, int i);530void cfm_state_change(struct s_smc *smc, int c_state);531 532#if defined(DEBUG) || !defined(NO_SMT_PANIC)533void smt_panic(struct s_smc *smc, char *text);534#else535#define smt_panic(smc,text)536#endif /* DEBUG || !NO_SMT_PANIC */537 538void smt_stat_counter(struct s_smc *smc, int stat);539void smt_timer_poll(struct s_smc *smc);540u_long smt_get_time(void);541u_long smt_get_tid(struct s_smc *smc);542void smt_timer_done(struct s_smc *smc);543void smt_fixup_mib(struct s_smc *smc);544void smt_reset_defaults(struct s_smc *smc, int level);545void smt_agent_task(struct s_smc *smc);546int smt_check_para(struct s_smc *smc, struct smt_header *sm,547 const u_short list[]);548void driver_get_bia(struct s_smc *smc, struct fddi_addr *bia_addr);549 550#ifdef SUPERNET_3551void drv_reset_indication(struct s_smc *smc);552#endif /* SUPERNET_3 */553 554void smt_start_watchdog(struct s_smc *smc);555void smt_event(struct s_smc *smc, int event);556void timer_event(struct s_smc *smc, u_long token);557void ev_dispatcher(struct s_smc *smc);558void pcm_get_state(struct s_smc *smc, struct smt_state *state);559void ecm_state_change(struct s_smc *smc, int e_state);560int sm_pm_bypass_present(struct s_smc *smc);561void pcm_state_change(struct s_smc *smc, int plc, int p_state);562void rmt_state_change(struct s_smc *smc, int r_state);563int sm_pm_get_ls(struct s_smc *smc, int phy);564int pcm_get_s_port(struct s_smc *smc);565int pcm_rooted_station(struct s_smc *smc);566int cfm_get_mac_input(struct s_smc *smc);567int cfm_get_mac_output(struct s_smc *smc);568int cem_build_path(struct s_smc *smc, char *to, int path_index);569int sm_mac_get_tx_state(struct s_smc *smc);570char *get_pcmstate(struct s_smc *smc, int np);571int smt_action(struct s_smc *smc, int class, int code, int index);572u_short smt_online(struct s_smc *smc, int on);573void smt_force_irq(struct s_smc *smc);574void smt_pmf_received_pack(struct s_smc *smc, SMbuf *mb, int local);575void smt_send_frame(struct s_smc *smc, SMbuf *mb, int fc, int local);576void smt_set_timestamp(struct s_smc *smc, u_char *p);577void mac_set_rx_mode(struct s_smc *smc, int mode);578int mac_add_multicast(struct s_smc *smc, struct fddi_addr *addr, int can);579void mac_update_multicast(struct s_smc *smc);580void mac_clear_multicast(struct s_smc *smc);581void set_formac_tsync(struct s_smc *smc, long sync_bw);582void formac_reinit_tx(struct s_smc *smc);583void formac_tx_restart(struct s_smc *smc);584void process_receive(struct s_smc *smc);585void init_driver_fplus(struct s_smc *smc);586void rtm_irq(struct s_smc *smc);587void rtm_set_timer(struct s_smc *smc);588void ring_status_indication(struct s_smc *smc, u_long status);589void llc_recover_tx(struct s_smc *smc);590void llc_restart_tx(struct s_smc *smc);591void plc_clear_irq(struct s_smc *smc, int p);592void plc_irq(struct s_smc *smc, int np, unsigned int cmd);593int smt_set_mac_opvalues(struct s_smc *smc);594 595#ifdef TAG_MODE596void mac_do_pci_fix(struct s_smc *smc);597void mac_drv_clear_tx_queue(struct s_smc *smc);598void mac_drv_repair_descr(struct s_smc *smc);599u_long hwt_quick_read(struct s_smc *smc);600void hwt_wait_time(struct s_smc *smc, u_long start, long duration);601#endif602 603#ifdef SMT_PNMI604int pnmi_init(struct s_smc* smc);605int pnmi_process_ndis_id(struct s_smc *smc, u_long ndis_oid, void *buf, int len,606 int *BytesAccessed, int *BytesNeeded, u_char action);607#endif608 609#ifdef SBA610#ifndef _H2INC611void sba();612#endif613void sba_raf_received_pack();614void sba_timer_poll();615void smt_init_sba();616#endif617 618#ifdef ESS619int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm,620 int fs);621void ess_timer_poll(struct s_smc *smc);622void ess_para_change(struct s_smc *smc);623#endif624 625#ifndef BOOT626void smt_init_evc(struct s_smc *smc);627void smt_srf_event(struct s_smc *smc, int code, int index, int cond);628#else629#define smt_init_evc(smc)630#define smt_srf_event(smc,code,index,cond)631#endif632 633#ifndef SMT_REAL_TOKEN_CT634void smt_emulate_token_ct(struct s_smc *smc, int mac_index);635#endif636 637#if defined(DEBUG) && !defined(BOOT)638void dump_smt(struct s_smc *smc, struct smt_header *sm, char *text);639#else640#define dump_smt(smc,sm,text)641#endif642 643#ifdef DEBUG644void dump_hex(char *p, int len);645#endif646 647#endif /* PROTOTYP_INC */648 649/* PNMI default defines */650#ifndef PNMI_INIT651#define PNMI_INIT(smc) /* Nothing */652#endif653 654/*655 * SMT_PANIC defines656 */657#ifndef SMT_PANIC658#define SMT_PANIC(smc,nr,msg) smt_panic (smc, msg)659#endif660 661#ifndef SMT_ERR_LOG662#define SMT_ERR_LOG(smc,nr,msg) SMT_PANIC (smc, nr, msg)663#endif664 665#ifndef SMT_EBASE666#define SMT_EBASE 100667#endif668 669#define SMT_E0100 SMT_EBASE + 0670#define SMT_E0100_MSG "cfm FSM: invalid ce_type"671#define SMT_E0101 SMT_EBASE + 1672#define SMT_E0101_MSG "CEM: case ???"673#define SMT_E0102 SMT_EBASE + 2674#define SMT_E0102_MSG "CEM A: invalid state"675#define SMT_E0103 SMT_EBASE + 3676#define SMT_E0103_MSG "CEM B: invalid state"677#define SMT_E0104 SMT_EBASE + 4678#define SMT_E0104_MSG "CEM M: invalid state"679#define SMT_E0105 SMT_EBASE + 5680#define SMT_E0105_MSG "CEM S: invalid state"681#define SMT_E0106 SMT_EBASE + 6682#define SMT_E0106_MSG "CFM : invalid state"683#define SMT_E0107 SMT_EBASE + 7684#define SMT_E0107_MSG "ECM : invalid state"685#define SMT_E0108 SMT_EBASE + 8686#define SMT_E0108_MSG "prop_actions : NAC in DAS CFM"687#define SMT_E0109 SMT_EBASE + 9688#define SMT_E0109_MSG "ST2U.FM_SERRSF error in special frame"689#define SMT_E0110 SMT_EBASE + 10690#define SMT_E0110_MSG "ST2U.FM_SRFRCTOV recv. count. overflow"691#define SMT_E0111 SMT_EBASE + 11692#define SMT_E0111_MSG "ST2U.FM_SNFSLD NP & FORMAC simult. load"693#define SMT_E0112 SMT_EBASE + 12694#define SMT_E0112_MSG "ST2U.FM_SRCVFRM single-frame recv.-mode"695#define SMT_E0113 SMT_EBASE + 13696#define SMT_E0113_MSG "FPLUS: Buffer Memory Error"697#define SMT_E0114 SMT_EBASE + 14698#define SMT_E0114_MSG "ST2U.FM_SERRSF error in special frame"699#define SMT_E0115 SMT_EBASE + 15700#define SMT_E0115_MSG "ST3L: parity error in receive queue 2"701#define SMT_E0116 SMT_EBASE + 16702#define SMT_E0116_MSG "ST3L: parity error in receive queue 1"703#define SMT_E0117 SMT_EBASE + 17704#define SMT_E0117_MSG "E_SMT_001: RxD count for receive queue 1 = 0"705#define SMT_E0118 SMT_EBASE + 18706#define SMT_E0118_MSG "PCM : invalid state"707#define SMT_E0119 SMT_EBASE + 19708#define SMT_E0119_MSG "smt_add_para"709#define SMT_E0120 SMT_EBASE + 20710#define SMT_E0120_MSG "smt_set_para"711#define SMT_E0121 SMT_EBASE + 21712#define SMT_E0121_MSG "invalid event in dispatcher"713#define SMT_E0122 SMT_EBASE + 22714#define SMT_E0122_MSG "RMT : invalid state"715#define SMT_E0123 SMT_EBASE + 23716#define SMT_E0123_MSG "SBA: state machine has invalid state"717#define SMT_E0124 SMT_EBASE + 24718#define SMT_E0124_MSG "sba_free_session() called with NULL pointer"719#define SMT_E0125 SMT_EBASE + 25720#define SMT_E0125_MSG "SBA : invalid session pointer"721#define SMT_E0126 SMT_EBASE + 26722#define SMT_E0126_MSG "smt_free_mbuf() called with NULL pointer\n"723#define SMT_E0127 SMT_EBASE + 27724#define SMT_E0127_MSG "sizeof evcs"725#define SMT_E0128 SMT_EBASE + 28726#define SMT_E0128_MSG "evc->evc_cond_state = 0"727#define SMT_E0129 SMT_EBASE + 29728#define SMT_E0129_MSG "evc->evc_multiple = 0"729#define SMT_E0130 SMT_EBASE + 30730#define SMT_E0130_MSG write_mdr_warning731#define SMT_E0131 SMT_EBASE + 31732#define SMT_E0131_MSG cam_warning733#define SMT_E0132 SMT_EBASE + 32734#define SMT_E0132_MSG "ST1L.FM_SPCEPDx parity/coding error"735#define SMT_E0133 SMT_EBASE + 33736#define SMT_E0133_MSG "ST1L.FM_STBURx tx buffer underrun"737#define SMT_E0134 SMT_EBASE + 34738#define SMT_E0134_MSG "ST1L.FM_SPCEPDx parity error"739#define SMT_E0135 SMT_EBASE + 35740#define SMT_E0135_MSG "RMT: duplicate MAC address detected. Ring left!"741#define SMT_E0136 SMT_EBASE + 36742#define SMT_E0136_MSG "Elasticity Buffer hang-up"743#define SMT_E0137 SMT_EBASE + 37744#define SMT_E0137_MSG "SMT: queue overrun"745#define SMT_E0138 SMT_EBASE + 38746#define SMT_E0138_MSG "RMT: duplicate MAC address detected. Ring NOT left!"747#endif /* _CMTDEF_ */748