666 lines · c
1/*2 3 mii.c: MII interface library4 5 Maintained by Jeff Garzik <jgarzik@pobox.com>6 Copyright 2001,2002 Jeff Garzik7 8 Various code came from myson803.c and other files by9 Donald Becker. Copyright:10 11 Written 1998-2002 by Donald Becker.12 13 This software may be used and distributed according14 to the terms of the GNU General Public License (GPL),15 incorporated herein by reference. Drivers based on16 or derived from this code fall under the GPL and must17 retain the authorship, copyright and license notice.18 This file is not a complete program and may only be19 used when the entire operating system is licensed20 under the GPL.21 22 The author may be reached as becker@scyld.com, or C/O23 Scyld Computing Corporation24 410 Severn Ave., Suite 21025 Annapolis MD 2140326 27 28 */29 30#include <linux/kernel.h>31#include <linux/module.h>32#include <linux/netdevice.h>33#include <linux/ethtool.h>34#include <linux/mii.h>35 36static u32 mii_get_an(struct mii_if_info *mii, u16 addr)37{38 int advert;39 40 advert = mii->mdio_read(mii->dev, mii->phy_id, addr);41 42 return mii_lpa_to_ethtool_lpa_t(advert);43}44 45/**46 * mii_ethtool_gset - get settings that are specified in @ecmd47 * @mii: MII interface48 * @ecmd: requested ethtool_cmd49 *50 * The @ecmd parameter is expected to have been cleared before calling51 * mii_ethtool_gset().52 */53void mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)54{55 struct net_device *dev = mii->dev;56 u16 bmcr, bmsr, ctrl1000 = 0, stat1000 = 0;57 u32 nego;58 59 ecmd->supported =60 (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |61 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |62 SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);63 if (mii->supports_gmii)64 ecmd->supported |= SUPPORTED_1000baseT_Half |65 SUPPORTED_1000baseT_Full;66 67 /* only supports twisted-pair */68 ecmd->port = PORT_MII;69 70 /* only supports internal transceiver */71 ecmd->transceiver = XCVR_INTERNAL;72 73 /* this isn't fully supported at higher layers */74 ecmd->phy_address = mii->phy_id;75 ecmd->mdio_support = ETH_MDIO_SUPPORTS_C22;76 77 ecmd->advertising = ADVERTISED_TP | ADVERTISED_MII;78 79 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);80 bmsr = mii->mdio_read(dev, mii->phy_id, MII_BMSR);81 if (mii->supports_gmii) {82 ctrl1000 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);83 stat1000 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000);84 }85 86 ecmd->advertising |= mii_get_an(mii, MII_ADVERTISE);87 if (mii->supports_gmii)88 ecmd->advertising |=89 mii_ctrl1000_to_ethtool_adv_t(ctrl1000);90 91 if (bmcr & BMCR_ANENABLE) {92 ecmd->advertising |= ADVERTISED_Autoneg;93 ecmd->autoneg = AUTONEG_ENABLE;94 95 if (bmsr & BMSR_ANEGCOMPLETE) {96 ecmd->lp_advertising = mii_get_an(mii, MII_LPA);97 ecmd->lp_advertising |=98 mii_stat1000_to_ethtool_lpa_t(stat1000);99 } else {100 ecmd->lp_advertising = 0;101 }102 103 nego = ecmd->advertising & ecmd->lp_advertising;104 105 if (nego & (ADVERTISED_1000baseT_Full |106 ADVERTISED_1000baseT_Half)) {107 ethtool_cmd_speed_set(ecmd, SPEED_1000);108 ecmd->duplex = !!(nego & ADVERTISED_1000baseT_Full);109 } else if (nego & (ADVERTISED_100baseT_Full |110 ADVERTISED_100baseT_Half)) {111 ethtool_cmd_speed_set(ecmd, SPEED_100);112 ecmd->duplex = !!(nego & ADVERTISED_100baseT_Full);113 } else {114 ethtool_cmd_speed_set(ecmd, SPEED_10);115 ecmd->duplex = !!(nego & ADVERTISED_10baseT_Full);116 }117 } else {118 ecmd->autoneg = AUTONEG_DISABLE;119 120 ethtool_cmd_speed_set(ecmd,121 ((bmcr & BMCR_SPEED1000 &&122 (bmcr & BMCR_SPEED100) == 0) ?123 SPEED_1000 :124 ((bmcr & BMCR_SPEED100) ?125 SPEED_100 : SPEED_10)));126 ecmd->duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;127 }128 129 mii->full_duplex = ecmd->duplex;130 131 /* ignore maxtxpkt, maxrxpkt for now */132}133 134/**135 * mii_ethtool_get_link_ksettings - get settings that are specified in @cmd136 * @mii: MII interface137 * @cmd: requested ethtool_link_ksettings138 *139 * The @cmd parameter is expected to have been cleared before calling140 * mii_ethtool_get_link_ksettings().141 */142void mii_ethtool_get_link_ksettings(struct mii_if_info *mii,143 struct ethtool_link_ksettings *cmd)144{145 struct net_device *dev = mii->dev;146 u16 bmcr, bmsr, ctrl1000 = 0, stat1000 = 0;147 u32 nego, supported, advertising, lp_advertising;148 149 supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |150 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |151 SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);152 if (mii->supports_gmii)153 supported |= SUPPORTED_1000baseT_Half |154 SUPPORTED_1000baseT_Full;155 156 /* only supports twisted-pair */157 cmd->base.port = PORT_MII;158 159 /* this isn't fully supported at higher layers */160 cmd->base.phy_address = mii->phy_id;161 cmd->base.mdio_support = ETH_MDIO_SUPPORTS_C22;162 163 advertising = ADVERTISED_TP | ADVERTISED_MII;164 165 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);166 bmsr = mii->mdio_read(dev, mii->phy_id, MII_BMSR);167 if (mii->supports_gmii) {168 ctrl1000 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);169 stat1000 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000);170 }171 172 advertising |= mii_get_an(mii, MII_ADVERTISE);173 if (mii->supports_gmii)174 advertising |= mii_ctrl1000_to_ethtool_adv_t(ctrl1000);175 176 if (bmcr & BMCR_ANENABLE) {177 advertising |= ADVERTISED_Autoneg;178 cmd->base.autoneg = AUTONEG_ENABLE;179 180 if (bmsr & BMSR_ANEGCOMPLETE) {181 lp_advertising = mii_get_an(mii, MII_LPA);182 lp_advertising |=183 mii_stat1000_to_ethtool_lpa_t(stat1000);184 } else {185 lp_advertising = 0;186 }187 188 nego = advertising & lp_advertising;189 190 if (nego & (ADVERTISED_1000baseT_Full |191 ADVERTISED_1000baseT_Half)) {192 cmd->base.speed = SPEED_1000;193 cmd->base.duplex = !!(nego & ADVERTISED_1000baseT_Full);194 } else if (nego & (ADVERTISED_100baseT_Full |195 ADVERTISED_100baseT_Half)) {196 cmd->base.speed = SPEED_100;197 cmd->base.duplex = !!(nego & ADVERTISED_100baseT_Full);198 } else {199 cmd->base.speed = SPEED_10;200 cmd->base.duplex = !!(nego & ADVERTISED_10baseT_Full);201 }202 } else {203 cmd->base.autoneg = AUTONEG_DISABLE;204 205 cmd->base.speed = ((bmcr & BMCR_SPEED1000 &&206 (bmcr & BMCR_SPEED100) == 0) ?207 SPEED_1000 :208 ((bmcr & BMCR_SPEED100) ?209 SPEED_100 : SPEED_10));210 cmd->base.duplex = (bmcr & BMCR_FULLDPLX) ?211 DUPLEX_FULL : DUPLEX_HALF;212 213 lp_advertising = 0;214 }215 216 mii->full_duplex = cmd->base.duplex;217 218 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,219 supported);220 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,221 advertising);222 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.lp_advertising,223 lp_advertising);224 225 /* ignore maxtxpkt, maxrxpkt for now */226}227 228/**229 * mii_ethtool_sset - set settings that are specified in @ecmd230 * @mii: MII interface231 * @ecmd: requested ethtool_cmd232 *233 * Returns 0 for success, negative on error.234 */235int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)236{237 struct net_device *dev = mii->dev;238 u32 speed = ethtool_cmd_speed(ecmd);239 240 if (speed != SPEED_10 &&241 speed != SPEED_100 &&242 speed != SPEED_1000)243 return -EINVAL;244 if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)245 return -EINVAL;246 if (ecmd->port != PORT_MII)247 return -EINVAL;248 if (ecmd->transceiver != XCVR_INTERNAL)249 return -EINVAL;250 if (ecmd->phy_address != mii->phy_id)251 return -EINVAL;252 if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)253 return -EINVAL;254 if ((speed == SPEED_1000) && (!mii->supports_gmii))255 return -EINVAL;256 257 /* ignore supported, maxtxpkt, maxrxpkt */258 259 if (ecmd->autoneg == AUTONEG_ENABLE) {260 u32 bmcr, advert, tmp;261 u32 advert2 = 0, tmp2 = 0;262 263 if ((ecmd->advertising & (ADVERTISED_10baseT_Half |264 ADVERTISED_10baseT_Full |265 ADVERTISED_100baseT_Half |266 ADVERTISED_100baseT_Full |267 ADVERTISED_1000baseT_Half |268 ADVERTISED_1000baseT_Full)) == 0)269 return -EINVAL;270 271 /* advertise only what has been requested */272 advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);273 tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);274 if (mii->supports_gmii) {275 advert2 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);276 tmp2 = advert2 & ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);277 }278 tmp |= ethtool_adv_to_mii_adv_t(ecmd->advertising);279 280 if (mii->supports_gmii)281 tmp2 |=282 ethtool_adv_to_mii_ctrl1000_t(ecmd->advertising);283 if (advert != tmp) {284 mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp);285 mii->advertising = tmp;286 }287 if ((mii->supports_gmii) && (advert2 != tmp2))288 mii->mdio_write(dev, mii->phy_id, MII_CTRL1000, tmp2);289 290 /* turn on autonegotiation, and force a renegotiate */291 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);292 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);293 mii->mdio_write(dev, mii->phy_id, MII_BMCR, bmcr);294 295 mii->force_media = 0;296 } else {297 u32 bmcr, tmp;298 299 /* turn off auto negotiation, set speed and duplexity */300 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);301 tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 |302 BMCR_SPEED1000 | BMCR_FULLDPLX);303 if (speed == SPEED_1000)304 tmp |= BMCR_SPEED1000;305 else if (speed == SPEED_100)306 tmp |= BMCR_SPEED100;307 if (ecmd->duplex == DUPLEX_FULL) {308 tmp |= BMCR_FULLDPLX;309 mii->full_duplex = 1;310 } else311 mii->full_duplex = 0;312 if (bmcr != tmp)313 mii->mdio_write(dev, mii->phy_id, MII_BMCR, tmp);314 315 mii->force_media = 1;316 }317 return 0;318}319 320/**321 * mii_ethtool_set_link_ksettings - set settings that are specified in @cmd322 * @mii: MII interfaces323 * @cmd: requested ethtool_link_ksettings324 *325 * Returns 0 for success, negative on error.326 */327int mii_ethtool_set_link_ksettings(struct mii_if_info *mii,328 const struct ethtool_link_ksettings *cmd)329{330 struct net_device *dev = mii->dev;331 u32 speed = cmd->base.speed;332 333 if (speed != SPEED_10 &&334 speed != SPEED_100 &&335 speed != SPEED_1000)336 return -EINVAL;337 if (cmd->base.duplex != DUPLEX_HALF && cmd->base.duplex != DUPLEX_FULL)338 return -EINVAL;339 if (cmd->base.port != PORT_MII)340 return -EINVAL;341 if (cmd->base.phy_address != mii->phy_id)342 return -EINVAL;343 if (cmd->base.autoneg != AUTONEG_DISABLE &&344 cmd->base.autoneg != AUTONEG_ENABLE)345 return -EINVAL;346 if ((speed == SPEED_1000) && (!mii->supports_gmii))347 return -EINVAL;348 349 /* ignore supported, maxtxpkt, maxrxpkt */350 351 if (cmd->base.autoneg == AUTONEG_ENABLE) {352 u32 bmcr, advert, tmp;353 u32 advert2 = 0, tmp2 = 0;354 u32 advertising;355 356 ethtool_convert_link_mode_to_legacy_u32(357 &advertising, cmd->link_modes.advertising);358 359 if ((advertising & (ADVERTISED_10baseT_Half |360 ADVERTISED_10baseT_Full |361 ADVERTISED_100baseT_Half |362 ADVERTISED_100baseT_Full |363 ADVERTISED_1000baseT_Half |364 ADVERTISED_1000baseT_Full)) == 0)365 return -EINVAL;366 367 /* advertise only what has been requested */368 advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);369 tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);370 if (mii->supports_gmii) {371 advert2 = mii->mdio_read(dev, mii->phy_id,372 MII_CTRL1000);373 tmp2 = advert2 &374 ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);375 }376 tmp |= ethtool_adv_to_mii_adv_t(advertising);377 378 if (mii->supports_gmii)379 tmp2 |= ethtool_adv_to_mii_ctrl1000_t(advertising);380 if (advert != tmp) {381 mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp);382 mii->advertising = tmp;383 }384 if ((mii->supports_gmii) && (advert2 != tmp2))385 mii->mdio_write(dev, mii->phy_id, MII_CTRL1000, tmp2);386 387 /* turn on autonegotiation, and force a renegotiate */388 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);389 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);390 mii->mdio_write(dev, mii->phy_id, MII_BMCR, bmcr);391 392 mii->force_media = 0;393 } else {394 u32 bmcr, tmp;395 396 /* turn off auto negotiation, set speed and duplexity */397 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);398 tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 |399 BMCR_SPEED1000 | BMCR_FULLDPLX);400 if (speed == SPEED_1000)401 tmp |= BMCR_SPEED1000;402 else if (speed == SPEED_100)403 tmp |= BMCR_SPEED100;404 if (cmd->base.duplex == DUPLEX_FULL) {405 tmp |= BMCR_FULLDPLX;406 mii->full_duplex = 1;407 } else {408 mii->full_duplex = 0;409 }410 if (bmcr != tmp)411 mii->mdio_write(dev, mii->phy_id, MII_BMCR, tmp);412 413 mii->force_media = 1;414 }415 return 0;416}417 418/**419 * mii_check_gmii_support - check if the MII supports Gb interfaces420 * @mii: the MII interface421 */422int mii_check_gmii_support(struct mii_if_info *mii)423{424 int reg;425 426 reg = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);427 if (reg & BMSR_ESTATEN) {428 reg = mii->mdio_read(mii->dev, mii->phy_id, MII_ESTATUS);429 if (reg & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF))430 return 1;431 }432 433 return 0;434}435 436/**437 * mii_link_ok - is link status up/ok438 * @mii: the MII interface439 *440 * Returns 1 if the MII reports link status up/ok, 0 otherwise.441 */442int mii_link_ok (struct mii_if_info *mii)443{444 /* first, a dummy read, needed to latch some MII phys */445 mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);446 if (mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR) & BMSR_LSTATUS)447 return 1;448 return 0;449}450 451/**452 * mii_nway_restart - restart NWay (autonegotiation) for this interface453 * @mii: the MII interface454 *455 * Returns 0 on success, negative on error.456 */457int mii_nway_restart (struct mii_if_info *mii)458{459 int bmcr;460 int r = -EINVAL;461 462 /* if autoneg is off, it's an error */463 bmcr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMCR);464 465 if (bmcr & BMCR_ANENABLE) {466 bmcr |= BMCR_ANRESTART;467 mii->mdio_write(mii->dev, mii->phy_id, MII_BMCR, bmcr);468 r = 0;469 }470 471 return r;472}473 474/**475 * mii_check_link - check MII link status476 * @mii: MII interface477 *478 * If the link status changed (previous != current), call479 * netif_carrier_on() if current link status is Up or call480 * netif_carrier_off() if current link status is Down.481 */482void mii_check_link (struct mii_if_info *mii)483{484 int cur_link = mii_link_ok(mii);485 int prev_link = netif_carrier_ok(mii->dev);486 487 if (cur_link && !prev_link)488 netif_carrier_on(mii->dev);489 else if (prev_link && !cur_link)490 netif_carrier_off(mii->dev);491}492 493/**494 * mii_check_media - check the MII interface for a carrier/speed/duplex change495 * @mii: the MII interface496 * @ok_to_print: OK to print link up/down messages497 * @init_media: OK to save duplex mode in @mii498 *499 * Returns 1 if the duplex mode changed, 0 if not.500 * If the media type is forced, always returns 0.501 */502unsigned int mii_check_media (struct mii_if_info *mii,503 unsigned int ok_to_print,504 unsigned int init_media)505{506 unsigned int old_carrier, new_carrier;507 int advertise, lpa, media, duplex;508 int lpa2 = 0;509 510 /* check current and old link status */511 old_carrier = netif_carrier_ok(mii->dev) ? 1 : 0;512 new_carrier = (unsigned int) mii_link_ok(mii);513 514 /* if carrier state did not change, this is a "bounce",515 * just exit as everything is already set correctly516 */517 if ((!init_media) && (old_carrier == new_carrier))518 return 0; /* duplex did not change */519 520 /* no carrier, nothing much to do */521 if (!new_carrier) {522 netif_carrier_off(mii->dev);523 if (ok_to_print)524 netdev_info(mii->dev, "link down\n");525 return 0; /* duplex did not change */526 }527 528 /*529 * we have carrier, see who's on the other end530 */531 netif_carrier_on(mii->dev);532 533 if (mii->force_media) {534 if (ok_to_print)535 netdev_info(mii->dev, "link up\n");536 return 0; /* duplex did not change */537 }538 539 /* get MII advertise and LPA values */540 if ((!init_media) && (mii->advertising))541 advertise = mii->advertising;542 else {543 advertise = mii->mdio_read(mii->dev, mii->phy_id, MII_ADVERTISE);544 mii->advertising = advertise;545 }546 lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA);547 if (mii->supports_gmii)548 lpa2 = mii->mdio_read(mii->dev, mii->phy_id, MII_STAT1000);549 550 /* figure out media and duplex from advertise and LPA values */551 media = mii_nway_result(lpa & advertise);552 duplex = (media & ADVERTISE_FULL) ? 1 : 0;553 if (lpa2 & LPA_1000FULL)554 duplex = 1;555 556 if (ok_to_print)557 netdev_info(mii->dev, "link up, %uMbps, %s-duplex, lpa 0x%04X\n",558 lpa2 & (LPA_1000FULL | LPA_1000HALF) ? 1000 :559 media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ?560 100 : 10,561 duplex ? "full" : "half",562 lpa);563 564 if ((init_media) || (mii->full_duplex != duplex)) {565 mii->full_duplex = duplex;566 return 1; /* duplex changed */567 }568 569 return 0; /* duplex did not change */570}571 572/**573 * generic_mii_ioctl - main MII ioctl interface574 * @mii_if: the MII interface575 * @mii_data: MII ioctl data structure576 * @cmd: MII ioctl command577 * @duplex_chg_out: pointer to @duplex_changed status if there was no578 * ioctl error579 *580 * Returns 0 on success, negative on error.581 */582int generic_mii_ioctl(struct mii_if_info *mii_if,583 struct mii_ioctl_data *mii_data, int cmd,584 unsigned int *duplex_chg_out)585{586 int rc = 0;587 unsigned int duplex_changed = 0;588 589 if (duplex_chg_out)590 *duplex_chg_out = 0;591 592 mii_data->phy_id &= mii_if->phy_id_mask;593 mii_data->reg_num &= mii_if->reg_num_mask;594 595 switch(cmd) {596 case SIOCGMIIPHY:597 mii_data->phy_id = mii_if->phy_id;598 fallthrough;599 600 case SIOCGMIIREG:601 mii_data->val_out =602 mii_if->mdio_read(mii_if->dev, mii_data->phy_id,603 mii_data->reg_num);604 break;605 606 case SIOCSMIIREG: {607 u16 val = mii_data->val_in;608 609 if (mii_data->phy_id == mii_if->phy_id) {610 switch(mii_data->reg_num) {611 case MII_BMCR: {612 unsigned int new_duplex = 0;613 if (val & (BMCR_RESET|BMCR_ANENABLE))614 mii_if->force_media = 0;615 else616 mii_if->force_media = 1;617 if (mii_if->force_media &&618 (val & BMCR_FULLDPLX))619 new_duplex = 1;620 if (mii_if->full_duplex != new_duplex) {621 duplex_changed = 1;622 mii_if->full_duplex = new_duplex;623 }624 break;625 }626 case MII_ADVERTISE:627 mii_if->advertising = val;628 break;629 default:630 /* do nothing */631 break;632 }633 }634 635 mii_if->mdio_write(mii_if->dev, mii_data->phy_id,636 mii_data->reg_num, val);637 break;638 }639 640 default:641 rc = -EOPNOTSUPP;642 break;643 }644 645 if ((rc == 0) && (duplex_chg_out) && (duplex_changed))646 *duplex_chg_out = 1;647 648 return rc;649}650 651MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");652MODULE_DESCRIPTION ("MII hardware support library");653MODULE_LICENSE("GPL");654 655EXPORT_SYMBOL(mii_link_ok);656EXPORT_SYMBOL(mii_nway_restart);657EXPORT_SYMBOL(mii_ethtool_gset);658EXPORT_SYMBOL(mii_ethtool_get_link_ksettings);659EXPORT_SYMBOL(mii_ethtool_sset);660EXPORT_SYMBOL(mii_ethtool_set_link_ksettings);661EXPORT_SYMBOL(mii_check_link);662EXPORT_SYMBOL(mii_check_media);663EXPORT_SYMBOL(mii_check_gmii_support);664EXPORT_SYMBOL(generic_mii_ioctl);665 666