brintos / linux-shallow public Read only

1/* SPDX-License-Identifier: ISC */2/*3 * Copyright (c) 2005-2011 Atheros Communications Inc.4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.5 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.6 * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.7 */8 9#ifndef _WMI_H_10#define _WMI_H_11 12#include <linux/types.h>13#include <linux/ieee80211.h>14 15/*16 * This file specifies the WMI interface for the Unified Software17 * Architecture.18 *19 * It includes definitions of all the commands and events. Commands are20 * messages from the host to the target. Events and Replies are messages21 * from the target to the host.22 *23 * Ownership of correctness in regards to WMI commands belongs to the host24 * driver and the target is not required to validate parameters for value,25 * proper range, or any other checking.26 *27 * Guidelines for extending this interface are below.28 *29 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff30 *31 * 2. Use ONLY u32 type for defining member variables within WMI32 *    command/event structures. Do not use u8, u16, bool or33 *    enum types within these structures.34 *35 * 3. DO NOT define bit fields within structures. Implement bit fields36 *    using masks if necessary. Do not use the programming language's bit37 *    field definition.38 *39 * 4. Define macros for encode/decode of u8, u16 fields within40 *    the u32 variables. Use these macros for set/get of these fields.41 *    Try to use this to optimize the structure without bloating it with42 *    u32 variables for every lower sized field.43 *44 * 5. Do not use PACK/UNPACK attributes for the structures as each member45 *    variable is already 4-byte aligned by virtue of being a u3246 *    type.47 *48 * 6. Comment each parameter part of the WMI command/event structure by49 *    using the 2 stars at the beginning of C comment instead of one star to50 *    enable HTML document generation using Doxygen.51 *52 */53 54/* Control Path */55struct wmi_cmd_hdr {56	__le32 cmd_id;57} __packed;58 59#define WMI_CMD_HDR_CMD_ID_MASK   0x00FFFFFF60#define WMI_CMD_HDR_CMD_ID_LSB    061#define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF00000062#define WMI_CMD_HDR_PLT_PRIV_LSB  2463 64#define HTC_PROTOCOL_VERSION    0x000265#define WMI_PROTOCOL_VERSION    0x000266 67/*68 * There is no signed version of __le32, so for a temporary solution come69 * up with our own version. The idea is from fs/ntfs/endian.h.70 *71 * Use a_ prefix so that it doesn't conflict if we get proper support to72 * linux/types.h.73 */74typedef __s32 __bitwise a_sle32;75 76static inline a_sle32 a_cpu_to_sle32(s32 val)77{78	return (__force a_sle32)cpu_to_le32(val);79}80 81static inline s32 a_sle32_to_cpu(a_sle32 val)82{83	return le32_to_cpu((__force __le32)val);84}85 86enum wmi_service {87	WMI_SERVICE_BEACON_OFFLOAD = 0,88	WMI_SERVICE_SCAN_OFFLOAD,89	WMI_SERVICE_ROAM_OFFLOAD,90	WMI_SERVICE_BCN_MISS_OFFLOAD,91	WMI_SERVICE_STA_PWRSAVE,92	WMI_SERVICE_STA_ADVANCED_PWRSAVE,93	WMI_SERVICE_AP_UAPSD,94	WMI_SERVICE_AP_DFS,95	WMI_SERVICE_11AC,96	WMI_SERVICE_BLOCKACK,97	WMI_SERVICE_PHYERR,98	WMI_SERVICE_BCN_FILTER,99	WMI_SERVICE_RTT,100	WMI_SERVICE_RATECTRL,101	WMI_SERVICE_WOW,102	WMI_SERVICE_RATECTRL_CACHE,103	WMI_SERVICE_IRAM_TIDS,104	WMI_SERVICE_ARPNS_OFFLOAD,105	WMI_SERVICE_NLO,106	WMI_SERVICE_GTK_OFFLOAD,107	WMI_SERVICE_SCAN_SCH,108	WMI_SERVICE_CSA_OFFLOAD,109	WMI_SERVICE_CHATTER,110	WMI_SERVICE_COEX_FREQAVOID,111	WMI_SERVICE_PACKET_POWER_SAVE,112	WMI_SERVICE_FORCE_FW_HANG,113	WMI_SERVICE_GPIO,114	WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,115	WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,116	WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,117	WMI_SERVICE_STA_KEEP_ALIVE,118	WMI_SERVICE_TX_ENCAP,119	WMI_SERVICE_BURST,120	WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,121	WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,122	WMI_SERVICE_ROAM_SCAN_OFFLOAD,123	WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,124	WMI_SERVICE_EARLY_RX,125	WMI_SERVICE_STA_SMPS,126	WMI_SERVICE_FWTEST,127	WMI_SERVICE_STA_WMMAC,128	WMI_SERVICE_TDLS,129	WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,130	WMI_SERVICE_ADAPTIVE_OCS,131	WMI_SERVICE_BA_SSN_SUPPORT,132	WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,133	WMI_SERVICE_WLAN_HB,134	WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,135	WMI_SERVICE_BATCH_SCAN,136	WMI_SERVICE_QPOWER,137	WMI_SERVICE_PLMREQ,138	WMI_SERVICE_THERMAL_MGMT,139	WMI_SERVICE_RMC,140	WMI_SERVICE_MHF_OFFLOAD,141	WMI_SERVICE_COEX_SAR,142	WMI_SERVICE_BCN_TXRATE_OVERRIDE,143	WMI_SERVICE_NAN,144	WMI_SERVICE_L1SS_STAT,145	WMI_SERVICE_ESTIMATE_LINKSPEED,146	WMI_SERVICE_OBSS_SCAN,147	WMI_SERVICE_TDLS_OFFCHAN,148	WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,149	WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,150	WMI_SERVICE_IBSS_PWRSAVE,151	WMI_SERVICE_LPASS,152	WMI_SERVICE_EXTSCAN,153	WMI_SERVICE_D0WOW,154	WMI_SERVICE_HSOFFLOAD,155	WMI_SERVICE_ROAM_HO_OFFLOAD,156	WMI_SERVICE_RX_FULL_REORDER,157	WMI_SERVICE_DHCP_OFFLOAD,158	WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,159	WMI_SERVICE_MDNS_OFFLOAD,160	WMI_SERVICE_SAP_AUTH_OFFLOAD,161	WMI_SERVICE_ATF,162	WMI_SERVICE_COEX_GPIO,163	WMI_SERVICE_ENHANCED_PROXY_STA,164	WMI_SERVICE_TT,165	WMI_SERVICE_PEER_CACHING,166	WMI_SERVICE_AUX_SPECTRAL_INTF,167	WMI_SERVICE_AUX_CHAN_LOAD_INTF,168	WMI_SERVICE_BSS_CHANNEL_INFO_64,169	WMI_SERVICE_EXT_RES_CFG_SUPPORT,170	WMI_SERVICE_MESH_11S,171	WMI_SERVICE_MESH_NON_11S,172	WMI_SERVICE_PEER_STATS,173	WMI_SERVICE_RESTRT_CHNL_SUPPORT,174	WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,175	WMI_SERVICE_TX_MODE_PUSH_ONLY,176	WMI_SERVICE_TX_MODE_PUSH_PULL,177	WMI_SERVICE_TX_MODE_DYNAMIC,178	WMI_SERVICE_VDEV_RX_FILTER,179	WMI_SERVICE_BTCOEX,180	WMI_SERVICE_CHECK_CAL_VERSION,181	WMI_SERVICE_DBGLOG_WARN2,182	WMI_SERVICE_BTCOEX_DUTY_CYCLE,183	WMI_SERVICE_4_WIRE_COEX_SUPPORT,184	WMI_SERVICE_EXTENDED_NSS_SUPPORT,185	WMI_SERVICE_PROG_GPIO_BAND_SELECT,186	WMI_SERVICE_SMART_LOGGING_SUPPORT,187	WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,188	WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,189	WMI_SERVICE_MGMT_TX_WMI,190	WMI_SERVICE_TDLS_WIDER_BANDWIDTH,191	WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,192	WMI_SERVICE_HOST_DFS_CHECK_SUPPORT,193	WMI_SERVICE_TPC_STATS_FINAL,194	WMI_SERVICE_RESET_CHIP,195	WMI_SERVICE_SPOOF_MAC_SUPPORT,196	WMI_SERVICE_TX_DATA_ACK_RSSI,197	WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,198	WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,199	WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT,200	WMI_SERVICE_THERM_THROT,201	WMI_SERVICE_RTT_RESPONDER_ROLE,202	WMI_SERVICE_PER_PACKET_SW_ENCRYPT,203	WMI_SERVICE_REPORT_AIRTIME,204	WMI_SERVICE_SYNC_DELETE_CMDS,205	WMI_SERVICE_TX_PWR_PER_PEER,206	WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,207	WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,208	WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,209 210	/* Remember to add the new value to wmi_service_name()! */211 212	/* keep last */213	WMI_SERVICE_MAX,214};215 216enum wmi_10x_service {217	WMI_10X_SERVICE_BEACON_OFFLOAD = 0,218	WMI_10X_SERVICE_SCAN_OFFLOAD,219	WMI_10X_SERVICE_ROAM_OFFLOAD,220	WMI_10X_SERVICE_BCN_MISS_OFFLOAD,221	WMI_10X_SERVICE_STA_PWRSAVE,222	WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,223	WMI_10X_SERVICE_AP_UAPSD,224	WMI_10X_SERVICE_AP_DFS,225	WMI_10X_SERVICE_11AC,226	WMI_10X_SERVICE_BLOCKACK,227	WMI_10X_SERVICE_PHYERR,228	WMI_10X_SERVICE_BCN_FILTER,229	WMI_10X_SERVICE_RTT,230	WMI_10X_SERVICE_RATECTRL,231	WMI_10X_SERVICE_WOW,232	WMI_10X_SERVICE_RATECTRL_CACHE,233	WMI_10X_SERVICE_IRAM_TIDS,234	WMI_10X_SERVICE_BURST,235 236	/* introduced in 10.2 */237	WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,238	WMI_10X_SERVICE_FORCE_FW_HANG,239	WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,240	WMI_10X_SERVICE_ATF,241	WMI_10X_SERVICE_COEX_GPIO,242	WMI_10X_SERVICE_AUX_SPECTRAL_INTF,243	WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,244	WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,245	WMI_10X_SERVICE_MESH,246	WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,247	WMI_10X_SERVICE_PEER_STATS,248	WMI_10X_SERVICE_RESET_CHIP,249	WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,250	WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL,251	WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,252	WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,253};254 255enum wmi_main_service {256	WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,257	WMI_MAIN_SERVICE_SCAN_OFFLOAD,258	WMI_MAIN_SERVICE_ROAM_OFFLOAD,259	WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,260	WMI_MAIN_SERVICE_STA_PWRSAVE,261	WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,262	WMI_MAIN_SERVICE_AP_UAPSD,263	WMI_MAIN_SERVICE_AP_DFS,264	WMI_MAIN_SERVICE_11AC,265	WMI_MAIN_SERVICE_BLOCKACK,266	WMI_MAIN_SERVICE_PHYERR,267	WMI_MAIN_SERVICE_BCN_FILTER,268	WMI_MAIN_SERVICE_RTT,269	WMI_MAIN_SERVICE_RATECTRL,270	WMI_MAIN_SERVICE_WOW,271	WMI_MAIN_SERVICE_RATECTRL_CACHE,272	WMI_MAIN_SERVICE_IRAM_TIDS,273	WMI_MAIN_SERVICE_ARPNS_OFFLOAD,274	WMI_MAIN_SERVICE_NLO,275	WMI_MAIN_SERVICE_GTK_OFFLOAD,276	WMI_MAIN_SERVICE_SCAN_SCH,277	WMI_MAIN_SERVICE_CSA_OFFLOAD,278	WMI_MAIN_SERVICE_CHATTER,279	WMI_MAIN_SERVICE_COEX_FREQAVOID,280	WMI_MAIN_SERVICE_PACKET_POWER_SAVE,281	WMI_MAIN_SERVICE_FORCE_FW_HANG,282	WMI_MAIN_SERVICE_GPIO,283	WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,284	WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,285	WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,286	WMI_MAIN_SERVICE_STA_KEEP_ALIVE,287	WMI_MAIN_SERVICE_TX_ENCAP,288};289 290enum wmi_10_4_service {291	WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,292	WMI_10_4_SERVICE_SCAN_OFFLOAD,293	WMI_10_4_SERVICE_ROAM_OFFLOAD,294	WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,295	WMI_10_4_SERVICE_STA_PWRSAVE,296	WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,297	WMI_10_4_SERVICE_AP_UAPSD,298	WMI_10_4_SERVICE_AP_DFS,299	WMI_10_4_SERVICE_11AC,300	WMI_10_4_SERVICE_BLOCKACK,301	WMI_10_4_SERVICE_PHYERR,302	WMI_10_4_SERVICE_BCN_FILTER,303	WMI_10_4_SERVICE_RTT,304	WMI_10_4_SERVICE_RATECTRL,305	WMI_10_4_SERVICE_WOW,306	WMI_10_4_SERVICE_RATECTRL_CACHE,307	WMI_10_4_SERVICE_IRAM_TIDS,308	WMI_10_4_SERVICE_BURST,309	WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,310	WMI_10_4_SERVICE_GTK_OFFLOAD,311	WMI_10_4_SERVICE_SCAN_SCH,312	WMI_10_4_SERVICE_CSA_OFFLOAD,313	WMI_10_4_SERVICE_CHATTER,314	WMI_10_4_SERVICE_COEX_FREQAVOID,315	WMI_10_4_SERVICE_PACKET_POWER_SAVE,316	WMI_10_4_SERVICE_FORCE_FW_HANG,317	WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,318	WMI_10_4_SERVICE_GPIO,319	WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,320	WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,321	WMI_10_4_SERVICE_STA_KEEP_ALIVE,322	WMI_10_4_SERVICE_TX_ENCAP,323	WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,324	WMI_10_4_SERVICE_EARLY_RX,325	WMI_10_4_SERVICE_ENHANCED_PROXY_STA,326	WMI_10_4_SERVICE_TT,327	WMI_10_4_SERVICE_ATF,328	WMI_10_4_SERVICE_PEER_CACHING,329	WMI_10_4_SERVICE_COEX_GPIO,330	WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,331	WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,332	WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,333	WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,334	WMI_10_4_SERVICE_MESH_NON_11S,335	WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,336	WMI_10_4_SERVICE_PEER_STATS,337	WMI_10_4_SERVICE_MESH_11S,338	WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,339	WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,340	WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,341	WMI_10_4_SERVICE_TX_MODE_DYNAMIC,342	WMI_10_4_SERVICE_VDEV_RX_FILTER,343	WMI_10_4_SERVICE_BTCOEX,344	WMI_10_4_SERVICE_CHECK_CAL_VERSION,345	WMI_10_4_SERVICE_DBGLOG_WARN2,346	WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,347	WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,348	WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,349	WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,350	WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,351	WMI_10_4_SERVICE_TDLS,352	WMI_10_4_SERVICE_TDLS_OFFCHAN,353	WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,354	WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,355	WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,356	WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,357	WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,358	WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,359	WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,360	WMI_10_4_SERVICE_TPC_STATS_FINAL,361	WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT,362	WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,363	WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY,364	WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,365	WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,366	WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL,367	WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,368	WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT,369	WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS,370	WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,371	WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE,372	WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT,373	WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,374	WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,375	WMI_10_4_SERVICE_REPORT_AIRTIME,376	WMI_10_4_SERVICE_TX_PWR_PER_PEER,377	WMI_10_4_SERVICE_FETCH_PEER_TX_PN,378	WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART,379	WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS,380	WMI_10_4_SERVICE_QINQ_SUPPORT,381	WMI_10_4_SERVICE_RESET_CHIP,382};383 384static inline char *wmi_service_name(enum wmi_service service_id)385{386#define SVCSTR(x) case x: return #x387 388	switch (service_id) {389	SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);390	SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);391	SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);392	SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);393	SVCSTR(WMI_SERVICE_STA_PWRSAVE);394	SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);395	SVCSTR(WMI_SERVICE_AP_UAPSD);396	SVCSTR(WMI_SERVICE_AP_DFS);397	SVCSTR(WMI_SERVICE_11AC);398	SVCSTR(WMI_SERVICE_BLOCKACK);399	SVCSTR(WMI_SERVICE_PHYERR);400	SVCSTR(WMI_SERVICE_BCN_FILTER);401	SVCSTR(WMI_SERVICE_RTT);402	SVCSTR(WMI_SERVICE_RATECTRL);403	SVCSTR(WMI_SERVICE_WOW);404	SVCSTR(WMI_SERVICE_RATECTRL_CACHE);405	SVCSTR(WMI_SERVICE_IRAM_TIDS);406	SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);407	SVCSTR(WMI_SERVICE_NLO);408	SVCSTR(WMI_SERVICE_GTK_OFFLOAD);409	SVCSTR(WMI_SERVICE_SCAN_SCH);410	SVCSTR(WMI_SERVICE_CSA_OFFLOAD);411	SVCSTR(WMI_SERVICE_CHATTER);412	SVCSTR(WMI_SERVICE_COEX_FREQAVOID);413	SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);414	SVCSTR(WMI_SERVICE_FORCE_FW_HANG);415	SVCSTR(WMI_SERVICE_GPIO);416	SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);417	SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);418	SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);419	SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);420	SVCSTR(WMI_SERVICE_TX_ENCAP);421	SVCSTR(WMI_SERVICE_BURST);422	SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);423	SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);424	SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);425	SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);426	SVCSTR(WMI_SERVICE_EARLY_RX);427	SVCSTR(WMI_SERVICE_STA_SMPS);428	SVCSTR(WMI_SERVICE_FWTEST);429	SVCSTR(WMI_SERVICE_STA_WMMAC);430	SVCSTR(WMI_SERVICE_TDLS);431	SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);432	SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);433	SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);434	SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);435	SVCSTR(WMI_SERVICE_WLAN_HB);436	SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);437	SVCSTR(WMI_SERVICE_BATCH_SCAN);438	SVCSTR(WMI_SERVICE_QPOWER);439	SVCSTR(WMI_SERVICE_PLMREQ);440	SVCSTR(WMI_SERVICE_THERMAL_MGMT);441	SVCSTR(WMI_SERVICE_RMC);442	SVCSTR(WMI_SERVICE_MHF_OFFLOAD);443	SVCSTR(WMI_SERVICE_COEX_SAR);444	SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);445	SVCSTR(WMI_SERVICE_NAN);446	SVCSTR(WMI_SERVICE_L1SS_STAT);447	SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);448	SVCSTR(WMI_SERVICE_OBSS_SCAN);449	SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);450	SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);451	SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);452	SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);453	SVCSTR(WMI_SERVICE_LPASS);454	SVCSTR(WMI_SERVICE_EXTSCAN);455	SVCSTR(WMI_SERVICE_D0WOW);456	SVCSTR(WMI_SERVICE_HSOFFLOAD);457	SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);458	SVCSTR(WMI_SERVICE_RX_FULL_REORDER);459	SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);460	SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);461	SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);462	SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);463	SVCSTR(WMI_SERVICE_ATF);464	SVCSTR(WMI_SERVICE_COEX_GPIO);465	SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);466	SVCSTR(WMI_SERVICE_TT);467	SVCSTR(WMI_SERVICE_PEER_CACHING);468	SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);469	SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);470	SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);471	SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);472	SVCSTR(WMI_SERVICE_MESH_11S);473	SVCSTR(WMI_SERVICE_MESH_NON_11S);474	SVCSTR(WMI_SERVICE_PEER_STATS);475	SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);476	SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT);477	SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);478	SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);479	SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);480	SVCSTR(WMI_SERVICE_VDEV_RX_FILTER);481	SVCSTR(WMI_SERVICE_BTCOEX);482	SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION);483	SVCSTR(WMI_SERVICE_DBGLOG_WARN2);484	SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE);485	SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT);486	SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT);487	SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT);488	SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT);489	SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE);490	SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY);491	SVCSTR(WMI_SERVICE_MGMT_TX_WMI);492	SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH);493	SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS);494	SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT);495	SVCSTR(WMI_SERVICE_TPC_STATS_FINAL);496	SVCSTR(WMI_SERVICE_RESET_CHIP);497	SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT);498	SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI);499	SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT);500	SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT);501	SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT);502	SVCSTR(WMI_SERVICE_THERM_THROT);503	SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);504	SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);505	SVCSTR(WMI_SERVICE_REPORT_AIRTIME);506	SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);507	SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);508	SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);509	SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);510	SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);511 512	case WMI_SERVICE_MAX:513		return NULL;514	}515 516#undef SVCSTR517 518	return NULL;519}520 521#define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \522	((svc_id) < (len) && \523	 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \524	 BIT((svc_id) % (sizeof(u32))))525 526/* This extension is required to accommodate new services, current limit527 * for wmi_services is 64 as target is using only 4-bits of each 32-bit528 * wmi_service word. Extending this to make use of remaining unused bits529 * for new services.530 */531#define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \532	((svc_id) >= (len) && \533	__le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \534	BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4))535 536#define SVCMAP(x, y, len) \537	do { \538		if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \539		    (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \540			__set_bit(y, out); \541	} while (0)542 543static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,544				   size_t len)545{546	SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,547	       WMI_SERVICE_BEACON_OFFLOAD, len);548	SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,549	       WMI_SERVICE_SCAN_OFFLOAD, len);550	SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,551	       WMI_SERVICE_ROAM_OFFLOAD, len);552	SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,553	       WMI_SERVICE_BCN_MISS_OFFLOAD, len);554	SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,555	       WMI_SERVICE_STA_PWRSAVE, len);556	SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,557	       WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);558	SVCMAP(WMI_10X_SERVICE_AP_UAPSD,559	       WMI_SERVICE_AP_UAPSD, len);560	SVCMAP(WMI_10X_SERVICE_AP_DFS,561	       WMI_SERVICE_AP_DFS, len);562	SVCMAP(WMI_10X_SERVICE_11AC,563	       WMI_SERVICE_11AC, len);564	SVCMAP(WMI_10X_SERVICE_BLOCKACK,565	       WMI_SERVICE_BLOCKACK, len);566	SVCMAP(WMI_10X_SERVICE_PHYERR,567	       WMI_SERVICE_PHYERR, len);568	SVCMAP(WMI_10X_SERVICE_BCN_FILTER,569	       WMI_SERVICE_BCN_FILTER, len);570	SVCMAP(WMI_10X_SERVICE_RTT,571	       WMI_SERVICE_RTT, len);572	SVCMAP(WMI_10X_SERVICE_RATECTRL,573	       WMI_SERVICE_RATECTRL, len);574	SVCMAP(WMI_10X_SERVICE_WOW,575	       WMI_SERVICE_WOW, len);576	SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,577	       WMI_SERVICE_RATECTRL_CACHE, len);578	SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,579	       WMI_SERVICE_IRAM_TIDS, len);580	SVCMAP(WMI_10X_SERVICE_BURST,581	       WMI_SERVICE_BURST, len);582	SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,583	       WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);584	SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,585	       WMI_SERVICE_FORCE_FW_HANG, len);586	SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,587	       WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);588	SVCMAP(WMI_10X_SERVICE_ATF,589	       WMI_SERVICE_ATF, len);590	SVCMAP(WMI_10X_SERVICE_COEX_GPIO,591	       WMI_SERVICE_COEX_GPIO, len);592	SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,593	       WMI_SERVICE_AUX_SPECTRAL_INTF, len);594	SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,595	       WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);596	SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,597	       WMI_SERVICE_BSS_CHANNEL_INFO_64, len);598	SVCMAP(WMI_10X_SERVICE_MESH,599	       WMI_SERVICE_MESH_11S, len);600	SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,601	       WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);602	SVCMAP(WMI_10X_SERVICE_PEER_STATS,603	       WMI_SERVICE_PEER_STATS, len);604	SVCMAP(WMI_10X_SERVICE_RESET_CHIP,605	       WMI_SERVICE_RESET_CHIP, len);606	SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,607	       WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);608	SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,609	       WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len);610	SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,611	       WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);612}613 614static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,615				    size_t len)616{617	SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,618	       WMI_SERVICE_BEACON_OFFLOAD, len);619	SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,620	       WMI_SERVICE_SCAN_OFFLOAD, len);621	SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,622	       WMI_SERVICE_ROAM_OFFLOAD, len);623	SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,624	       WMI_SERVICE_BCN_MISS_OFFLOAD, len);625	SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,626	       WMI_SERVICE_STA_PWRSAVE, len);627	SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,628	       WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);629	SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,630	       WMI_SERVICE_AP_UAPSD, len);631	SVCMAP(WMI_MAIN_SERVICE_AP_DFS,632	       WMI_SERVICE_AP_DFS, len);633	SVCMAP(WMI_MAIN_SERVICE_11AC,634	       WMI_SERVICE_11AC, len);635	SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,636	       WMI_SERVICE_BLOCKACK, len);637	SVCMAP(WMI_MAIN_SERVICE_PHYERR,638	       WMI_SERVICE_PHYERR, len);639	SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,640	       WMI_SERVICE_BCN_FILTER, len);641	SVCMAP(WMI_MAIN_SERVICE_RTT,642	       WMI_SERVICE_RTT, len);643	SVCMAP(WMI_MAIN_SERVICE_RATECTRL,644	       WMI_SERVICE_RATECTRL, len);645	SVCMAP(WMI_MAIN_SERVICE_WOW,646	       WMI_SERVICE_WOW, len);647	SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,648	       WMI_SERVICE_RATECTRL_CACHE, len);649	SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,650	       WMI_SERVICE_IRAM_TIDS, len);651	SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,652	       WMI_SERVICE_ARPNS_OFFLOAD, len);653	SVCMAP(WMI_MAIN_SERVICE_NLO,654	       WMI_SERVICE_NLO, len);655	SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,656	       WMI_SERVICE_GTK_OFFLOAD, len);657	SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,658	       WMI_SERVICE_SCAN_SCH, len);659	SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,660	       WMI_SERVICE_CSA_OFFLOAD, len);661	SVCMAP(WMI_MAIN_SERVICE_CHATTER,662	       WMI_SERVICE_CHATTER, len);663	SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,664	       WMI_SERVICE_COEX_FREQAVOID, len);665	SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,666	       WMI_SERVICE_PACKET_POWER_SAVE, len);667	SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,668	       WMI_SERVICE_FORCE_FW_HANG, len);669	SVCMAP(WMI_MAIN_SERVICE_GPIO,670	       WMI_SERVICE_GPIO, len);671	SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,672	       WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);673	SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,674	       WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);675	SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,676	       WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);677	SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,678	       WMI_SERVICE_STA_KEEP_ALIVE, len);679	SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,680	       WMI_SERVICE_TX_ENCAP, len);681}682 683static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,684				    size_t len)685{686	SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,687	       WMI_SERVICE_BEACON_OFFLOAD, len);688	SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,689	       WMI_SERVICE_SCAN_OFFLOAD, len);690	SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,691	       WMI_SERVICE_ROAM_OFFLOAD, len);692	SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,693	       WMI_SERVICE_BCN_MISS_OFFLOAD, len);694	SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,695	       WMI_SERVICE_STA_PWRSAVE, len);696	SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,697	       WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);698	SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,699	       WMI_SERVICE_AP_UAPSD, len);700	SVCMAP(WMI_10_4_SERVICE_AP_DFS,701	       WMI_SERVICE_AP_DFS, len);702	SVCMAP(WMI_10_4_SERVICE_11AC,703	       WMI_SERVICE_11AC, len);704	SVCMAP(WMI_10_4_SERVICE_BLOCKACK,705	       WMI_SERVICE_BLOCKACK, len);706	SVCMAP(WMI_10_4_SERVICE_PHYERR,707	       WMI_SERVICE_PHYERR, len);708	SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,709	       WMI_SERVICE_BCN_FILTER, len);710	SVCMAP(WMI_10_4_SERVICE_RTT,711	       WMI_SERVICE_RTT, len);712	SVCMAP(WMI_10_4_SERVICE_RATECTRL,713	       WMI_SERVICE_RATECTRL, len);714	SVCMAP(WMI_10_4_SERVICE_WOW,715	       WMI_SERVICE_WOW, len);716	SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,717	       WMI_SERVICE_RATECTRL_CACHE, len);718	SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,719	       WMI_SERVICE_IRAM_TIDS, len);720	SVCMAP(WMI_10_4_SERVICE_BURST,721	       WMI_SERVICE_BURST, len);722	SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,723	       WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);724	SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,725	       WMI_SERVICE_GTK_OFFLOAD, len);726	SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,727	       WMI_SERVICE_SCAN_SCH, len);728	SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,729	       WMI_SERVICE_CSA_OFFLOAD, len);730	SVCMAP(WMI_10_4_SERVICE_CHATTER,731	       WMI_SERVICE_CHATTER, len);732	SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,733	       WMI_SERVICE_COEX_FREQAVOID, len);734	SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,735	       WMI_SERVICE_PACKET_POWER_SAVE, len);736	SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,737	       WMI_SERVICE_FORCE_FW_HANG, len);738	SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,739	       WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);740	SVCMAP(WMI_10_4_SERVICE_GPIO,741	       WMI_SERVICE_GPIO, len);742	SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,743	       WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);744	SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,745	       WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);746	SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,747	       WMI_SERVICE_STA_KEEP_ALIVE, len);748	SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,749	       WMI_SERVICE_TX_ENCAP, len);750	SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,751	       WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);752	SVCMAP(WMI_10_4_SERVICE_EARLY_RX,753	       WMI_SERVICE_EARLY_RX, len);754	SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,755	       WMI_SERVICE_ENHANCED_PROXY_STA, len);756	SVCMAP(WMI_10_4_SERVICE_TT,757	       WMI_SERVICE_TT, len);758	SVCMAP(WMI_10_4_SERVICE_ATF,759	       WMI_SERVICE_ATF, len);760	SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,761	       WMI_SERVICE_PEER_CACHING, len);762	SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,763	       WMI_SERVICE_COEX_GPIO, len);764	SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,765	       WMI_SERVICE_AUX_SPECTRAL_INTF, len);766	SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,767	       WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);768	SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,769	       WMI_SERVICE_BSS_CHANNEL_INFO_64, len);770	SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,771	       WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);772	SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,773	       WMI_SERVICE_MESH_NON_11S, len);774	SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,775	       WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);776	SVCMAP(WMI_10_4_SERVICE_PEER_STATS,777	       WMI_SERVICE_PEER_STATS, len);778	SVCMAP(WMI_10_4_SERVICE_MESH_11S,779	       WMI_SERVICE_MESH_11S, len);780	SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,781	       WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len);782	SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,783	       WMI_SERVICE_TX_MODE_PUSH_ONLY, len);784	SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,785	       WMI_SERVICE_TX_MODE_PUSH_PULL, len);786	SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,787	       WMI_SERVICE_TX_MODE_DYNAMIC, len);788	SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER,789	       WMI_SERVICE_VDEV_RX_FILTER, len);790	SVCMAP(WMI_10_4_SERVICE_BTCOEX,791	       WMI_SERVICE_BTCOEX, len);792	SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION,793	       WMI_SERVICE_CHECK_CAL_VERSION, len);794	SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2,795	       WMI_SERVICE_DBGLOG_WARN2, len);796	SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,797	       WMI_SERVICE_BTCOEX_DUTY_CYCLE, len);798	SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,799	       WMI_SERVICE_4_WIRE_COEX_SUPPORT, len);800	SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,801	       WMI_SERVICE_EXTENDED_NSS_SUPPORT, len);802	SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,803	       WMI_SERVICE_PROG_GPIO_BAND_SELECT, len);804	SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,805	       WMI_SERVICE_SMART_LOGGING_SUPPORT, len);806	SVCMAP(WMI_10_4_SERVICE_TDLS,807	       WMI_SERVICE_TDLS, len);808	SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN,809	       WMI_SERVICE_TDLS_OFFCHAN, len);810	SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,811	       WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len);812	SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,813	       WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len);814	SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,815	       WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len);816	SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,817	       WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len);818	SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,819	       WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len);820	SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,821	       WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);822	SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,823	       WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len);824	SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL,825	       WMI_SERVICE_TPC_STATS_FINAL, len);826	SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,827	       WMI_SERVICE_TX_DATA_ACK_RSSI, len);828	SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,829	       WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len);830	SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,831	       WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len);832	SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,833	       WMI_SERVICE_RTT_RESPONDER_ROLE, len);834	SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,835	       WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);836	SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,837	       WMI_SERVICE_REPORT_AIRTIME, len);838	SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER,839	       WMI_SERVICE_TX_PWR_PER_PEER, len);840	SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,841	       WMI_SERVICE_RESET_CHIP, len);842	SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,843	       WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);844	SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,845	       WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);846}847 848#undef SVCMAP849 850/* 2 word representation of MAC addr */851struct wmi_mac_addr {852	union {853		u8 addr[6];854		struct {855			u32 word0;856			u32 word1;857		} __packed;858	} __packed;859} __packed;860 861struct wmi_cmd_map {862	u32 init_cmdid;863	u32 start_scan_cmdid;864	u32 stop_scan_cmdid;865	u32 scan_chan_list_cmdid;866	u32 scan_sch_prio_tbl_cmdid;867	u32 scan_prob_req_oui_cmdid;868	u32 pdev_set_regdomain_cmdid;869	u32 pdev_set_channel_cmdid;870	u32 pdev_set_param_cmdid;871	u32 pdev_pktlog_enable_cmdid;872	u32 pdev_pktlog_disable_cmdid;873	u32 pdev_set_wmm_params_cmdid;874	u32 pdev_set_ht_cap_ie_cmdid;875	u32 pdev_set_vht_cap_ie_cmdid;876	u32 pdev_set_dscp_tid_map_cmdid;877	u32 pdev_set_quiet_mode_cmdid;878	u32 pdev_green_ap_ps_enable_cmdid;879	u32 pdev_get_tpc_config_cmdid;880	u32 pdev_set_base_macaddr_cmdid;881	u32 vdev_create_cmdid;882	u32 vdev_delete_cmdid;883	u32 vdev_start_request_cmdid;884	u32 vdev_restart_request_cmdid;885	u32 vdev_up_cmdid;886	u32 vdev_stop_cmdid;887	u32 vdev_down_cmdid;888	u32 vdev_set_param_cmdid;889	u32 vdev_install_key_cmdid;890	u32 peer_create_cmdid;891	u32 peer_delete_cmdid;892	u32 peer_flush_tids_cmdid;893	u32 peer_set_param_cmdid;894	u32 peer_assoc_cmdid;895	u32 peer_add_wds_entry_cmdid;896	u32 peer_remove_wds_entry_cmdid;897	u32 peer_mcast_group_cmdid;898	u32 bcn_tx_cmdid;899	u32 pdev_send_bcn_cmdid;900	u32 bcn_tmpl_cmdid;901	u32 bcn_filter_rx_cmdid;902	u32 prb_req_filter_rx_cmdid;903	u32 mgmt_tx_cmdid;904	u32 mgmt_tx_send_cmdid;905	u32 prb_tmpl_cmdid;906	u32 addba_clear_resp_cmdid;907	u32 addba_send_cmdid;908	u32 addba_status_cmdid;909	u32 delba_send_cmdid;910	u32 addba_set_resp_cmdid;911	u32 send_singleamsdu_cmdid;912	u32 sta_powersave_mode_cmdid;913	u32 sta_powersave_param_cmdid;914	u32 sta_mimo_ps_mode_cmdid;915	u32 pdev_dfs_enable_cmdid;916	u32 pdev_dfs_disable_cmdid;917	u32 roam_scan_mode;918	u32 roam_scan_rssi_threshold;919	u32 roam_scan_period;920	u32 roam_scan_rssi_change_threshold;921	u32 roam_ap_profile;922	u32 ofl_scan_add_ap_profile;923	u32 ofl_scan_remove_ap_profile;924	u32 ofl_scan_period;925	u32 p2p_dev_set_device_info;926	u32 p2p_dev_set_discoverability;927	u32 p2p_go_set_beacon_ie;928	u32 p2p_go_set_probe_resp_ie;929	u32 p2p_set_vendor_ie_data_cmdid;930	u32 ap_ps_peer_param_cmdid;931	u32 ap_ps_peer_uapsd_coex_cmdid;932	u32 peer_rate_retry_sched_cmdid;933	u32 wlan_profile_trigger_cmdid;934	u32 wlan_profile_set_hist_intvl_cmdid;935	u32 wlan_profile_get_profile_data_cmdid;936	u32 wlan_profile_enable_profile_id_cmdid;937	u32 wlan_profile_list_profile_id_cmdid;938	u32 pdev_suspend_cmdid;939	u32 pdev_resume_cmdid;940	u32 add_bcn_filter_cmdid;941	u32 rmv_bcn_filter_cmdid;942	u32 wow_add_wake_pattern_cmdid;943	u32 wow_del_wake_pattern_cmdid;944	u32 wow_enable_disable_wake_event_cmdid;945	u32 wow_enable_cmdid;946	u32 wow_hostwakeup_from_sleep_cmdid;947	u32 rtt_measreq_cmdid;948	u32 rtt_tsf_cmdid;949	u32 vdev_spectral_scan_configure_cmdid;950	u32 vdev_spectral_scan_enable_cmdid;951	u32 request_stats_cmdid;952	u32 request_peer_stats_info_cmdid;953	u32 set_arp_ns_offload_cmdid;954	u32 network_list_offload_config_cmdid;955	u32 gtk_offload_cmdid;956	u32 csa_offload_enable_cmdid;957	u32 csa_offload_chanswitch_cmdid;958	u32 chatter_set_mode_cmdid;959	u32 peer_tid_addba_cmdid;960	u32 peer_tid_delba_cmdid;961	u32 sta_dtim_ps_method_cmdid;962	u32 sta_uapsd_auto_trig_cmdid;963	u32 sta_keepalive_cmd;964	u32 echo_cmdid;965	u32 pdev_utf_cmdid;966	u32 dbglog_cfg_cmdid;967	u32 pdev_qvit_cmdid;968	u32 pdev_ftm_intg_cmdid;969	u32 vdev_set_keepalive_cmdid;970	u32 vdev_get_keepalive_cmdid;971	u32 force_fw_hang_cmdid;972	u32 gpio_config_cmdid;973	u32 gpio_output_cmdid;974	u32 pdev_get_temperature_cmdid;975	u32 vdev_set_wmm_params_cmdid;976	u32 tdls_set_state_cmdid;977	u32 tdls_peer_update_cmdid;978	u32 adaptive_qcs_cmdid;979	u32 scan_update_request_cmdid;980	u32 vdev_standby_response_cmdid;981	u32 vdev_resume_response_cmdid;982	u32 wlan_peer_caching_add_peer_cmdid;983	u32 wlan_peer_caching_evict_peer_cmdid;984	u32 wlan_peer_caching_restore_peer_cmdid;985	u32 wlan_peer_caching_print_all_peers_info_cmdid;986	u32 peer_update_wds_entry_cmdid;987	u32 peer_add_proxy_sta_entry_cmdid;988	u32 rtt_keepalive_cmdid;989	u32 oem_req_cmdid;990	u32 nan_cmdid;991	u32 vdev_ratemask_cmdid;992	u32 qboost_cfg_cmdid;993	u32 pdev_smart_ant_enable_cmdid;994	u32 pdev_smart_ant_set_rx_antenna_cmdid;995	u32 peer_smart_ant_set_tx_antenna_cmdid;996	u32 peer_smart_ant_set_train_info_cmdid;997	u32 peer_smart_ant_set_node_config_ops_cmdid;998	u32 pdev_set_antenna_switch_table_cmdid;999	u32 pdev_set_ctl_table_cmdid;1000	u32 pdev_set_mimogain_table_cmdid;1001	u32 pdev_ratepwr_table_cmdid;1002	u32 pdev_ratepwr_chainmsk_table_cmdid;1003	u32 pdev_fips_cmdid;1004	u32 tt_set_conf_cmdid;1005	u32 fwtest_cmdid;1006	u32 vdev_atf_request_cmdid;1007	u32 peer_atf_request_cmdid;1008	u32 pdev_get_ani_cck_config_cmdid;1009	u32 pdev_get_ani_ofdm_config_cmdid;1010	u32 pdev_reserve_ast_entry_cmdid;1011	u32 pdev_get_nfcal_power_cmdid;1012	u32 pdev_get_tpc_cmdid;1013	u32 pdev_get_ast_info_cmdid;1014	u32 vdev_set_dscp_tid_map_cmdid;1015	u32 pdev_get_info_cmdid;1016	u32 vdev_get_info_cmdid;1017	u32 vdev_filter_neighbor_rx_packets_cmdid;1018	u32 mu_cal_start_cmdid;1019	u32 set_cca_params_cmdid;1020	u32 pdev_bss_chan_info_request_cmdid;1021	u32 pdev_enable_adaptive_cca_cmdid;1022	u32 ext_resource_cfg_cmdid;1023	u32 vdev_set_ie_cmdid;1024	u32 set_lteu_config_cmdid;1025	u32 atf_ssid_grouping_request_cmdid;1026	u32 peer_atf_ext_request_cmdid;1027	u32 set_periodic_channel_stats_cfg_cmdid;1028	u32 peer_bwf_request_cmdid;1029	u32 btcoex_cfg_cmdid;1030	u32 peer_tx_mu_txmit_count_cmdid;1031	u32 peer_tx_mu_txmit_rstcnt_cmdid;1032	u32 peer_gid_userpos_list_cmdid;1033	u32 pdev_check_cal_version_cmdid;1034	u32 coex_version_cfg_cmid;1035	u32 pdev_get_rx_filter_cmdid;1036	u32 pdev_extended_nss_cfg_cmdid;1037	u32 vdev_set_scan_nac_rssi_cmdid;1038	u32 prog_gpio_band_select_cmdid;1039	u32 config_smart_logging_cmdid;1040	u32 debug_fatal_condition_cmdid;1041	u32 get_tsf_timer_cmdid;1042	u32 pdev_get_tpc_table_cmdid;1043	u32 vdev_sifs_trigger_time_cmdid;1044	u32 pdev_wds_entry_list_cmdid;1045	u32 tdls_set_offchan_mode_cmdid;1046	u32 radar_found_cmdid;1047	u32 set_bb_timing_cmdid;1048	u32 per_peer_per_tid_config_cmdid;1049};1050 1051/*1052 * wmi command groups.1053 */1054enum wmi_cmd_group {1055	/* 0 to 2 are reserved */1056	WMI_GRP_START = 0x3,1057	WMI_GRP_SCAN = WMI_GRP_START,1058	WMI_GRP_PDEV,1059	WMI_GRP_VDEV,1060	WMI_GRP_PEER,1061	WMI_GRP_MGMT,1062	WMI_GRP_BA_NEG,1063	WMI_GRP_STA_PS,1064	WMI_GRP_DFS,1065	WMI_GRP_ROAM,1066	WMI_GRP_OFL_SCAN,1067	WMI_GRP_P2P,1068	WMI_GRP_AP_PS,1069	WMI_GRP_RATE_CTRL,1070	WMI_GRP_PROFILE,1071	WMI_GRP_SUSPEND,1072	WMI_GRP_BCN_FILTER,1073	WMI_GRP_WOW,1074	WMI_GRP_RTT,1075	WMI_GRP_SPECTRAL,1076	WMI_GRP_STATS,1077	WMI_GRP_ARP_NS_OFL,1078	WMI_GRP_NLO_OFL,1079	WMI_GRP_GTK_OFL,1080	WMI_GRP_CSA_OFL,1081	WMI_GRP_CHATTER,1082	WMI_GRP_TID_ADDBA,1083	WMI_GRP_MISC,1084	WMI_GRP_GPIO,1085};1086 1087#define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)1088#define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)1089 1090#define WMI_CMD_UNSUPPORTED 01091 1092/* Command IDs and command events for MAIN FW. */1093enum wmi_cmd_id {1094	WMI_INIT_CMDID = 0x1,1095 1096	/* Scan specific commands */1097	WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),1098	WMI_STOP_SCAN_CMDID,1099	WMI_SCAN_CHAN_LIST_CMDID,1100	WMI_SCAN_SCH_PRIO_TBL_CMDID,1101 1102	/* PDEV (physical device) specific commands */1103	WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),1104	WMI_PDEV_SET_CHANNEL_CMDID,1105	WMI_PDEV_SET_PARAM_CMDID,1106	WMI_PDEV_PKTLOG_ENABLE_CMDID,1107	WMI_PDEV_PKTLOG_DISABLE_CMDID,1108	WMI_PDEV_SET_WMM_PARAMS_CMDID,1109	WMI_PDEV_SET_HT_CAP_IE_CMDID,1110	WMI_PDEV_SET_VHT_CAP_IE_CMDID,1111	WMI_PDEV_SET_DSCP_TID_MAP_CMDID,1112	WMI_PDEV_SET_QUIET_MODE_CMDID,1113	WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,1114	WMI_PDEV_GET_TPC_CONFIG_CMDID,1115	WMI_PDEV_SET_BASE_MACADDR_CMDID,1116 1117	/* VDEV (virtual device) specific commands */1118	WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),1119	WMI_VDEV_DELETE_CMDID,1120	WMI_VDEV_START_REQUEST_CMDID,1121	WMI_VDEV_RESTART_REQUEST_CMDID,1122	WMI_VDEV_UP_CMDID,1123	WMI_VDEV_STOP_CMDID,1124	WMI_VDEV_DOWN_CMDID,1125	WMI_VDEV_SET_PARAM_CMDID,1126	WMI_VDEV_INSTALL_KEY_CMDID,1127 1128	/* peer specific commands */1129	WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),1130	WMI_PEER_DELETE_CMDID,1131	WMI_PEER_FLUSH_TIDS_CMDID,1132	WMI_PEER_SET_PARAM_CMDID,1133	WMI_PEER_ASSOC_CMDID,1134	WMI_PEER_ADD_WDS_ENTRY_CMDID,1135	WMI_PEER_REMOVE_WDS_ENTRY_CMDID,1136	WMI_PEER_MCAST_GROUP_CMDID,1137 1138	/* beacon/management specific commands */1139	WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),1140	WMI_PDEV_SEND_BCN_CMDID,1141	WMI_BCN_TMPL_CMDID,1142	WMI_BCN_FILTER_RX_CMDID,1143	WMI_PRB_REQ_FILTER_RX_CMDID,1144	WMI_MGMT_TX_CMDID,1145	WMI_PRB_TMPL_CMDID,1146 1147	/* commands to directly control BA negotiation directly from host. */1148	WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),1149	WMI_ADDBA_SEND_CMDID,1150	WMI_ADDBA_STATUS_CMDID,1151	WMI_DELBA_SEND_CMDID,1152	WMI_ADDBA_SET_RESP_CMDID,1153	WMI_SEND_SINGLEAMSDU_CMDID,1154 1155	/* Station power save specific config */1156	WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),1157	WMI_STA_POWERSAVE_PARAM_CMDID,1158	WMI_STA_MIMO_PS_MODE_CMDID,1159 1160	/** DFS-specific commands */1161	WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),1162	WMI_PDEV_DFS_DISABLE_CMDID,1163 1164	/* Roaming specific  commands */1165	WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),1166	WMI_ROAM_SCAN_RSSI_THRESHOLD,1167	WMI_ROAM_SCAN_PERIOD,1168	WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,1169	WMI_ROAM_AP_PROFILE,1170 1171	/* offload scan specific commands */1172	WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),1173	WMI_OFL_SCAN_REMOVE_AP_PROFILE,1174	WMI_OFL_SCAN_PERIOD,1175 1176	/* P2P specific commands */1177	WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),1178	WMI_P2P_DEV_SET_DISCOVERABILITY,1179	WMI_P2P_GO_SET_BEACON_IE,1180	WMI_P2P_GO_SET_PROBE_RESP_IE,1181	WMI_P2P_SET_VENDOR_IE_DATA_CMDID,1182 1183	/* AP power save specific config */1184	WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),1185	WMI_AP_PS_PEER_UAPSD_COEX_CMDID,1186 1187	/* Rate-control specific commands */1188	WMI_PEER_RATE_RETRY_SCHED_CMDID =1189	WMI_CMD_GRP(WMI_GRP_RATE_CTRL),1190 1191	/* WLAN Profiling commands. */1192	WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),1193	WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,1194	WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,1195	WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,1196	WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,1197 1198	/* Suspend resume command Ids */1199	WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),1200	WMI_PDEV_RESUME_CMDID,1201 1202	/* Beacon filter commands */1203	WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),1204	WMI_RMV_BCN_FILTER_CMDID,1205 1206	/* WOW Specific WMI commands*/1207	WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),1208	WMI_WOW_DEL_WAKE_PATTERN_CMDID,1209	WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,1210	WMI_WOW_ENABLE_CMDID,1211	WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,1212 1213	/* RTT measurement related cmd */1214	WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),1215	WMI_RTT_TSF_CMDID,1216 1217	/* spectral scan commands */1218	WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),1219	WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,1220 1221	/* F/W stats */1222	WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),1223 1224	/* ARP OFFLOAD REQUEST*/1225	WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),1226 1227	/* NS offload confid*/1228	WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),1229 1230	/* GTK offload Specific WMI commands*/1231	WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),1232 1233	/* CSA offload Specific WMI commands*/1234	WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),1235	WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,1236 1237	/* Chatter commands*/1238	WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),1239 1240	/* addba specific commands */1241	WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),1242	WMI_PEER_TID_DELBA_CMDID,1243 1244	/* set station mimo powersave method */1245	WMI_STA_DTIM_PS_METHOD_CMDID,1246	/* Configure the Station UAPSD AC Auto Trigger Parameters */1247	WMI_STA_UAPSD_AUTO_TRIG_CMDID,1248 1249	/* STA Keep alive parameter configuration,1250	 * Requires WMI_SERVICE_STA_KEEP_ALIVE1251	 */1252	WMI_STA_KEEPALIVE_CMD,1253 1254	/* misc command group */1255	WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),1256	WMI_PDEV_UTF_CMDID,1257	WMI_DBGLOG_CFG_CMDID,1258	WMI_PDEV_QVIT_CMDID,1259	WMI_PDEV_FTM_INTG_CMDID,1260	WMI_VDEV_SET_KEEPALIVE_CMDID,1261	WMI_VDEV_GET_KEEPALIVE_CMDID,1262	WMI_FORCE_FW_HANG_CMDID,1263 1264	/* GPIO Configuration */1265	WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),1266	WMI_GPIO_OUTPUT_CMDID,1267};1268 1269enum wmi_event_id {1270	WMI_SERVICE_READY_EVENTID = 0x1,1271	WMI_READY_EVENTID,1272	WMI_SERVICE_AVAILABLE_EVENTID,1273 1274	/* Scan specific events */1275	WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),1276 1277	/* PDEV specific events */1278	WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),1279	WMI_CHAN_INFO_EVENTID,1280	WMI_PHYERR_EVENTID,1281 1282	/* VDEV specific events */1283	WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),1284	WMI_VDEV_STOPPED_EVENTID,1285	WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,1286 1287	/* peer specific events */1288	WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),1289 1290	/* beacon/mgmt specific events */1291	WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),1292	WMI_HOST_SWBA_EVENTID,1293	WMI_TBTTOFFSET_UPDATE_EVENTID,1294 1295	/* ADDBA Related WMI Events*/1296	WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),1297	WMI_TX_ADDBA_COMPLETE_EVENTID,1298 1299	/* Roam event to trigger roaming on host */1300	WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),1301	WMI_PROFILE_MATCH,1302 1303	/* WoW */1304	WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),1305 1306	/* RTT */1307	WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),1308	WMI_TSF_MEASUREMENT_REPORT_EVENTID,1309	WMI_RTT_ERROR_REPORT_EVENTID,1310 1311	/* GTK offload */1312	WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),1313	WMI_GTK_REKEY_FAIL_EVENTID,1314 1315	/* CSA IE received event */1316	WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),1317 1318	/* Misc events */1319	WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),1320	WMI_PDEV_UTF_EVENTID,1321	WMI_DEBUG_MESG_EVENTID,1322	WMI_UPDATE_STATS_EVENTID,1323	WMI_DEBUG_PRINT_EVENTID,1324	WMI_DCS_INTERFERENCE_EVENTID,1325	WMI_PDEV_QVIT_EVENTID,1326	WMI_WLAN_PROFILE_DATA_EVENTID,1327	WMI_PDEV_FTM_INTG_EVENTID,1328	WMI_WLAN_FREQ_AVOID_EVENTID,1329	WMI_VDEV_GET_KEEPALIVE_EVENTID,1330 1331	/* GPIO Event */1332	WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),1333};1334 1335/* Command IDs and command events for 10.X firmware */1336enum wmi_10x_cmd_id {1337	WMI_10X_START_CMDID = 0x9000,1338	WMI_10X_END_CMDID = 0x9FFF,1339 1340	/* initialize the wlan sub system */1341	WMI_10X_INIT_CMDID,1342 1343	/* Scan specific commands */1344 1345	WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,1346	WMI_10X_STOP_SCAN_CMDID,1347	WMI_10X_SCAN_CHAN_LIST_CMDID,1348	WMI_10X_ECHO_CMDID,1349 1350	/* PDEV(physical device) specific commands */1351	WMI_10X_PDEV_SET_REGDOMAIN_CMDID,1352	WMI_10X_PDEV_SET_CHANNEL_CMDID,1353	WMI_10X_PDEV_SET_PARAM_CMDID,1354	WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,1355	WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,1356	WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,1357	WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,1358	WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,1359	WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,1360	WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,1361	WMI_10X_PDEV_SET_QUIET_MODE_CMDID,1362	WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,1363	WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,1364 1365	/* VDEV(virtual device) specific commands */1366	WMI_10X_VDEV_CREATE_CMDID,1367	WMI_10X_VDEV_DELETE_CMDID,1368	WMI_10X_VDEV_START_REQUEST_CMDID,1369	WMI_10X_VDEV_RESTART_REQUEST_CMDID,1370	WMI_10X_VDEV_UP_CMDID,1371	WMI_10X_VDEV_STOP_CMDID,1372	WMI_10X_VDEV_DOWN_CMDID,1373	WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,1374	WMI_10X_VDEV_RESUME_RESPONSE_CMDID,1375	WMI_10X_VDEV_SET_PARAM_CMDID,1376	WMI_10X_VDEV_INSTALL_KEY_CMDID,1377 1378	/* peer specific commands */1379	WMI_10X_PEER_CREATE_CMDID,1380	WMI_10X_PEER_DELETE_CMDID,1381	WMI_10X_PEER_FLUSH_TIDS_CMDID,1382	WMI_10X_PEER_SET_PARAM_CMDID,1383	WMI_10X_PEER_ASSOC_CMDID,1384	WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,1385	WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,1386	WMI_10X_PEER_MCAST_GROUP_CMDID,1387 1388	/* beacon/management specific commands */1389 1390	WMI_10X_BCN_TX_CMDID,1391	WMI_10X_BCN_PRB_TMPL_CMDID,1392	WMI_10X_BCN_FILTER_RX_CMDID,1393	WMI_10X_PRB_REQ_FILTER_RX_CMDID,1394	WMI_10X_MGMT_TX_CMDID,1395 1396	/* commands to directly control ba negotiation directly from host. */1397	WMI_10X_ADDBA_CLEAR_RESP_CMDID,1398	WMI_10X_ADDBA_SEND_CMDID,1399	WMI_10X_ADDBA_STATUS_CMDID,1400	WMI_10X_DELBA_SEND_CMDID,1401	WMI_10X_ADDBA_SET_RESP_CMDID,1402	WMI_10X_SEND_SINGLEAMSDU_CMDID,1403 1404	/* Station power save specific config */1405	WMI_10X_STA_POWERSAVE_MODE_CMDID,1406	WMI_10X_STA_POWERSAVE_PARAM_CMDID,1407	WMI_10X_STA_MIMO_PS_MODE_CMDID,1408 1409	/* set debug log config */1410	WMI_10X_DBGLOG_CFG_CMDID,1411 1412	/* DFS-specific commands */1413	WMI_10X_PDEV_DFS_ENABLE_CMDID,1414	WMI_10X_PDEV_DFS_DISABLE_CMDID,1415 1416	/* QVIT specific command id */1417	WMI_10X_PDEV_QVIT_CMDID,1418 1419	/* Offload Scan and Roaming related  commands */1420	WMI_10X_ROAM_SCAN_MODE,1421	WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,1422	WMI_10X_ROAM_SCAN_PERIOD,1423	WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,1424	WMI_10X_ROAM_AP_PROFILE,1425	WMI_10X_OFL_SCAN_ADD_AP_PROFILE,1426	WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,1427	WMI_10X_OFL_SCAN_PERIOD,1428 1429	/* P2P specific commands */1430	WMI_10X_P2P_DEV_SET_DEVICE_INFO,1431	WMI_10X_P2P_DEV_SET_DISCOVERABILITY,1432	WMI_10X_P2P_GO_SET_BEACON_IE,1433	WMI_10X_P2P_GO_SET_PROBE_RESP_IE,1434 1435	/* AP power save specific config */1436	WMI_10X_AP_PS_PEER_PARAM_CMDID,1437	WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,1438 1439	/* Rate-control specific commands */1440	WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,1441 1442	/* WLAN Profiling commands. */1443	WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,1444	WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,1445	WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,1446	WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,1447	WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,1448 1449	/* Suspend resume command Ids */1450	WMI_10X_PDEV_SUSPEND_CMDID,1451	WMI_10X_PDEV_RESUME_CMDID,1452 1453	/* Beacon filter commands */1454	WMI_10X_ADD_BCN_FILTER_CMDID,1455	WMI_10X_RMV_BCN_FILTER_CMDID,1456 1457	/* WOW Specific WMI commands*/1458	WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,1459	WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,1460	WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,1461	WMI_10X_WOW_ENABLE_CMDID,1462	WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,1463 1464	/* RTT measurement related cmd */1465	WMI_10X_RTT_MEASREQ_CMDID,1466	WMI_10X_RTT_TSF_CMDID,1467 1468	/* transmit beacon by value */1469	WMI_10X_PDEV_SEND_BCN_CMDID,1470 1471	/* F/W stats */1472	WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,1473	WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,1474	WMI_10X_REQUEST_STATS_CMDID,1475 1476	/* GPIO Configuration */1477	WMI_10X_GPIO_CONFIG_CMDID,1478	WMI_10X_GPIO_OUTPUT_CMDID,1479 1480	WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,1481};1482 1483enum wmi_10x_event_id {1484	WMI_10X_SERVICE_READY_EVENTID = 0x8000,1485	WMI_10X_READY_EVENTID,1486	WMI_10X_START_EVENTID = 0x9000,1487	WMI_10X_END_EVENTID = 0x9FFF,1488 1489	/* Scan specific events */1490	WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,1491	WMI_10X_ECHO_EVENTID,1492	WMI_10X_DEBUG_MESG_EVENTID,1493	WMI_10X_UPDATE_STATS_EVENTID,1494 1495	/* Instantaneous RSSI event */1496	WMI_10X_INST_RSSI_STATS_EVENTID,1497 1498	/* VDEV specific events */1499	WMI_10X_VDEV_START_RESP_EVENTID,1500	WMI_10X_VDEV_STANDBY_REQ_EVENTID,1501	WMI_10X_VDEV_RESUME_REQ_EVENTID,1502	WMI_10X_VDEV_STOPPED_EVENTID,1503 1504	/* peer  specific events */1505	WMI_10X_PEER_STA_KICKOUT_EVENTID,1506 1507	/* beacon/mgmt specific events */1508	WMI_10X_HOST_SWBA_EVENTID,1509	WMI_10X_TBTTOFFSET_UPDATE_EVENTID,1510	WMI_10X_MGMT_RX_EVENTID,1511 1512	/* Channel stats event */1513	WMI_10X_CHAN_INFO_EVENTID,1514 1515	/* PHY Error specific WMI event */1516	WMI_10X_PHYERR_EVENTID,1517 1518	/* Roam event to trigger roaming on host */1519	WMI_10X_ROAM_EVENTID,1520 1521	/* matching AP found from list of profiles */1522	WMI_10X_PROFILE_MATCH,1523 1524	/* debug print message used for tracing FW code while debugging */1525	WMI_10X_DEBUG_PRINT_EVENTID,1526	/* VI spoecific event */1527	WMI_10X_PDEV_QVIT_EVENTID,1528	/* FW code profile data in response to profile request */1529	WMI_10X_WLAN_PROFILE_DATA_EVENTID,1530 1531	/*RTT related event ID*/1532	WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,1533	WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,1534	WMI_10X_RTT_ERROR_REPORT_EVENTID,1535 1536	WMI_10X_WOW_WAKEUP_HOST_EVENTID,1537	WMI_10X_DCS_INTERFERENCE_EVENTID,1538 1539	/* TPC config for the current operating channel */1540	WMI_10X_PDEV_TPC_CONFIG_EVENTID,1541 1542	WMI_10X_GPIO_INPUT_EVENTID,1543	WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,1544};1545 1546enum wmi_10_2_cmd_id {1547	WMI_10_2_START_CMDID = 0x9000,1548	WMI_10_2_END_CMDID = 0x9FFF,1549	WMI_10_2_INIT_CMDID,1550	WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,1551	WMI_10_2_STOP_SCAN_CMDID,1552	WMI_10_2_SCAN_CHAN_LIST_CMDID,1553	WMI_10_2_ECHO_CMDID,1554	WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,1555	WMI_10_2_PDEV_SET_CHANNEL_CMDID,1556	WMI_10_2_PDEV_SET_PARAM_CMDID,1557	WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,1558	WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,1559	WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,1560	WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,1561	WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,1562	WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,1563	WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,1564	WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,1565	WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,1566	WMI_10_2_VDEV_CREATE_CMDID,1567	WMI_10_2_VDEV_DELETE_CMDID,1568	WMI_10_2_VDEV_START_REQUEST_CMDID,1569	WMI_10_2_VDEV_RESTART_REQUEST_CMDID,1570	WMI_10_2_VDEV_UP_CMDID,1571	WMI_10_2_VDEV_STOP_CMDID,1572	WMI_10_2_VDEV_DOWN_CMDID,1573	WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,1574	WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,1575	WMI_10_2_VDEV_SET_PARAM_CMDID,1576	WMI_10_2_VDEV_INSTALL_KEY_CMDID,1577	WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,1578	WMI_10_2_PEER_CREATE_CMDID,1579	WMI_10_2_PEER_DELETE_CMDID,1580	WMI_10_2_PEER_FLUSH_TIDS_CMDID,1581	WMI_10_2_PEER_SET_PARAM_CMDID,1582	WMI_10_2_PEER_ASSOC_CMDID,1583	WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,1584	WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,1585	WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,1586	WMI_10_2_PEER_MCAST_GROUP_CMDID,1587	WMI_10_2_BCN_TX_CMDID,1588	WMI_10_2_BCN_PRB_TMPL_CMDID,1589	WMI_10_2_BCN_FILTER_RX_CMDID,1590	WMI_10_2_PRB_REQ_FILTER_RX_CMDID,1591	WMI_10_2_MGMT_TX_CMDID,1592	WMI_10_2_ADDBA_CLEAR_RESP_CMDID,1593	WMI_10_2_ADDBA_SEND_CMDID,1594	WMI_10_2_ADDBA_STATUS_CMDID,1595	WMI_10_2_DELBA_SEND_CMDID,1596	WMI_10_2_ADDBA_SET_RESP_CMDID,1597	WMI_10_2_SEND_SINGLEAMSDU_CMDID,1598	WMI_10_2_STA_POWERSAVE_MODE_CMDID,1599	WMI_10_2_STA_POWERSAVE_PARAM_CMDID,1600	WMI_10_2_STA_MIMO_PS_MODE_CMDID,1601	WMI_10_2_DBGLOG_CFG_CMDID,1602	WMI_10_2_PDEV_DFS_ENABLE_CMDID,1603	WMI_10_2_PDEV_DFS_DISABLE_CMDID,1604	WMI_10_2_PDEV_QVIT_CMDID,1605	WMI_10_2_ROAM_SCAN_MODE,1606	WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,1607	WMI_10_2_ROAM_SCAN_PERIOD,1608	WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,1609	WMI_10_2_ROAM_AP_PROFILE,1610	WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,1611	WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,1612	WMI_10_2_OFL_SCAN_PERIOD,1613	WMI_10_2_P2P_DEV_SET_DEVICE_INFO,1614	WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,1615	WMI_10_2_P2P_GO_SET_BEACON_IE,1616	WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,1617	WMI_10_2_AP_PS_PEER_PARAM_CMDID,1618	WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,1619	WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,1620	WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,1621	WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,1622	WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,1623	WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,1624	WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,1625	WMI_10_2_PDEV_SUSPEND_CMDID,1626	WMI_10_2_PDEV_RESUME_CMDID,1627	WMI_10_2_ADD_BCN_FILTER_CMDID,1628	WMI_10_2_RMV_BCN_FILTER_CMDID,1629	WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,1630	WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,1631	WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,1632	WMI_10_2_WOW_ENABLE_CMDID,1633	WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,1634	WMI_10_2_RTT_MEASREQ_CMDID,1635	WMI_10_2_RTT_TSF_CMDID,1636	WMI_10_2_RTT_KEEPALIVE_CMDID,1637	WMI_10_2_PDEV_SEND_BCN_CMDID,1638	WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,1639	WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,1640	WMI_10_2_REQUEST_STATS_CMDID,1641	WMI_10_2_GPIO_CONFIG_CMDID,1642	WMI_10_2_GPIO_OUTPUT_CMDID,1643	WMI_10_2_VDEV_RATEMASK_CMDID,1644	WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,1645	WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,1646	WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,1647	WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,1648	WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,1649	WMI_10_2_FORCE_FW_HANG_CMDID,1650	WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,1651	WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,1652	WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,1653	WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,1654	WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,1655	WMI_10_2_PDEV_GET_INFO,1656	WMI_10_2_VDEV_GET_INFO,1657	WMI_10_2_VDEV_ATF_REQUEST_CMDID,1658	WMI_10_2_PEER_ATF_REQUEST_CMDID,1659	WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,1660	WMI_10_2_MU_CAL_START_CMDID,1661	WMI_10_2_SET_LTEU_CONFIG_CMDID,1662	WMI_10_2_SET_CCA_PARAMS,1663	WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,1664	WMI_10_2_FWTEST_CMDID,1665	WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID,1666	WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,1667};1668 1669enum wmi_10_2_event_id {1670	WMI_10_2_SERVICE_READY_EVENTID = 0x8000,1671	WMI_10_2_READY_EVENTID,1672	WMI_10_2_DEBUG_MESG_EVENTID,1673	WMI_10_2_START_EVENTID = 0x9000,1674	WMI_10_2_END_EVENTID = 0x9FFF,1675	WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,1676	WMI_10_2_ECHO_EVENTID,1677	WMI_10_2_UPDATE_STATS_EVENTID,1678	WMI_10_2_INST_RSSI_STATS_EVENTID,1679	WMI_10_2_VDEV_START_RESP_EVENTID,1680	WMI_10_2_VDEV_STANDBY_REQ_EVENTID,1681	WMI_10_2_VDEV_RESUME_REQ_EVENTID,1682	WMI_10_2_VDEV_STOPPED_EVENTID,1683	WMI_10_2_PEER_STA_KICKOUT_EVENTID,1684	WMI_10_2_HOST_SWBA_EVENTID,1685	WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,1686	WMI_10_2_MGMT_RX_EVENTID,1687	WMI_10_2_CHAN_INFO_EVENTID,1688	WMI_10_2_PHYERR_EVENTID,1689	WMI_10_2_ROAM_EVENTID,1690	WMI_10_2_PROFILE_MATCH,1691	WMI_10_2_DEBUG_PRINT_EVENTID,1692	WMI_10_2_PDEV_QVIT_EVENTID,1693	WMI_10_2_WLAN_PROFILE_DATA_EVENTID,1694	WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,1695	WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,1696	WMI_10_2_RTT_ERROR_REPORT_EVENTID,1697	WMI_10_2_RTT_KEEPALIVE_EVENTID,1698	WMI_10_2_WOW_WAKEUP_HOST_EVENTID,1699	WMI_10_2_DCS_INTERFERENCE_EVENTID,1700	WMI_10_2_PDEV_TPC_CONFIG_EVENTID,1701	WMI_10_2_GPIO_INPUT_EVENTID,1702	WMI_10_2_PEER_RATECODE_LIST_EVENTID,1703	WMI_10_2_GENERIC_BUFFER_EVENTID,1704	WMI_10_2_MCAST_BUF_RELEASE_EVENTID,1705	WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,1706	WMI_10_2_WDS_PEER_EVENTID,1707	WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,1708	WMI_10_2_PDEV_TEMPERATURE_EVENTID,1709	WMI_10_2_MU_REPORT_EVENTID,1710	WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,1711	WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,1712};1713 1714enum wmi_10_4_cmd_id {1715	WMI_10_4_START_CMDID = 0x9000,1716	WMI_10_4_END_CMDID = 0x9FFF,1717	WMI_10_4_INIT_CMDID,1718	WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,1719	WMI_10_4_STOP_SCAN_CMDID,1720	WMI_10_4_SCAN_CHAN_LIST_CMDID,1721	WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,1722	WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,1723	WMI_10_4_ECHO_CMDID,1724	WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,1725	WMI_10_4_PDEV_SET_CHANNEL_CMDID,1726	WMI_10_4_PDEV_SET_PARAM_CMDID,1727	WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,1728	WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,1729	WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,1730	WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,1731	WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,1732	WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,1733	WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,1734	WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,1735	WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,1736	WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,1737	WMI_10_4_VDEV_CREATE_CMDID,1738	WMI_10_4_VDEV_DELETE_CMDID,1739	WMI_10_4_VDEV_START_REQUEST_CMDID,1740	WMI_10_4_VDEV_RESTART_REQUEST_CMDID,1741	WMI_10_4_VDEV_UP_CMDID,1742	WMI_10_4_VDEV_STOP_CMDID,1743	WMI_10_4_VDEV_DOWN_CMDID,1744	WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,1745	WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,1746	WMI_10_4_VDEV_SET_PARAM_CMDID,1747	WMI_10_4_VDEV_INSTALL_KEY_CMDID,1748	WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,1749	WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,1750	WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,1751	WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,1752	WMI_10_4_PEER_CREATE_CMDID,1753	WMI_10_4_PEER_DELETE_CMDID,1754	WMI_10_4_PEER_FLUSH_TIDS_CMDID,1755	WMI_10_4_PEER_SET_PARAM_CMDID,1756	WMI_10_4_PEER_ASSOC_CMDID,1757	WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,1758	WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,1759	WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,1760	WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,1761	WMI_10_4_PEER_MCAST_GROUP_CMDID,1762	WMI_10_4_BCN_TX_CMDID,1763	WMI_10_4_PDEV_SEND_BCN_CMDID,1764	WMI_10_4_BCN_PRB_TMPL_CMDID,1765	WMI_10_4_BCN_FILTER_RX_CMDID,1766	WMI_10_4_PRB_REQ_FILTER_RX_CMDID,1767	WMI_10_4_MGMT_TX_CMDID,1768	WMI_10_4_PRB_TMPL_CMDID,1769	WMI_10_4_ADDBA_CLEAR_RESP_CMDID,1770	WMI_10_4_ADDBA_SEND_CMDID,1771	WMI_10_4_ADDBA_STATUS_CMDID,1772	WMI_10_4_DELBA_SEND_CMDID,1773	WMI_10_4_ADDBA_SET_RESP_CMDID,1774	WMI_10_4_SEND_SINGLEAMSDU_CMDID,1775	WMI_10_4_STA_POWERSAVE_MODE_CMDID,1776	WMI_10_4_STA_POWERSAVE_PARAM_CMDID,1777	WMI_10_4_STA_MIMO_PS_MODE_CMDID,1778	WMI_10_4_DBGLOG_CFG_CMDID,1779	WMI_10_4_PDEV_DFS_ENABLE_CMDID,1780	WMI_10_4_PDEV_DFS_DISABLE_CMDID,1781	WMI_10_4_PDEV_QVIT_CMDID,1782	WMI_10_4_ROAM_SCAN_MODE,1783	WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,1784	WMI_10_4_ROAM_SCAN_PERIOD,1785	WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,1786	WMI_10_4_ROAM_AP_PROFILE,1787	WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,1788	WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,1789	WMI_10_4_OFL_SCAN_PERIOD,1790	WMI_10_4_P2P_DEV_SET_DEVICE_INFO,1791	WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,1792	WMI_10_4_P2P_GO_SET_BEACON_IE,1793	WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,1794	WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,1795	WMI_10_4_AP_PS_PEER_PARAM_CMDID,1796	WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,1797	WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,1798	WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,1799	WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,1800	WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,1801	WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,1802	WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,1803	WMI_10_4_PDEV_SUSPEND_CMDID,1804	WMI_10_4_PDEV_RESUME_CMDID,1805	WMI_10_4_ADD_BCN_FILTER_CMDID,1806	WMI_10_4_RMV_BCN_FILTER_CMDID,1807	WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,1808	WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,1809	WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,1810	WMI_10_4_WOW_ENABLE_CMDID,1811	WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,1812	WMI_10_4_RTT_MEASREQ_CMDID,1813	WMI_10_4_RTT_TSF_CMDID,1814	WMI_10_4_RTT_KEEPALIVE_CMDID,1815	WMI_10_4_OEM_REQ_CMDID,1816	WMI_10_4_NAN_CMDID,1817	WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,1818	WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,1819	WMI_10_4_REQUEST_STATS_CMDID,1820	WMI_10_4_GPIO_CONFIG_CMDID,1821	WMI_10_4_GPIO_OUTPUT_CMDID,1822	WMI_10_4_VDEV_RATEMASK_CMDID,1823	WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,1824	WMI_10_4_GTK_OFFLOAD_CMDID,1825	WMI_10_4_QBOOST_CFG_CMDID,1826	WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,1827	WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,1828	WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,1829	WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,1830	WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,1831	WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,1832	WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,1833	WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,1834	WMI_10_4_FORCE_FW_HANG_CMDID,1835	WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,1836	WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,1837	WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,1838	WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,1839	WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,1840	WMI_10_4_PDEV_FIPS_CMDID,1841	WMI_10_4_TT_SET_CONF_CMDID,1842	WMI_10_4_FWTEST_CMDID,1843	WMI_10_4_VDEV_ATF_REQUEST_CMDID,1844	WMI_10_4_PEER_ATF_REQUEST_CMDID,1845	WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,1846	WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,1847	WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,1848	WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,1849	WMI_10_4_PDEV_GET_TPC_CMDID,1850	WMI_10_4_PDEV_GET_AST_INFO_CMDID,1851	WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,1852	WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,1853	WMI_10_4_PDEV_GET_INFO_CMDID,1854	WMI_10_4_VDEV_GET_INFO_CMDID,1855	WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,1856	WMI_10_4_MU_CAL_START_CMDID,1857	WMI_10_4_SET_CCA_PARAMS_CMDID,1858	WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,1859	WMI_10_4_EXT_RESOURCE_CFG_CMDID,1860	WMI_10_4_VDEV_SET_IE_CMDID,1861	WMI_10_4_SET_LTEU_CONFIG_CMDID,1862	WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,1863	WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,1864	WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,1865	WMI_10_4_PEER_BWF_REQUEST_CMDID,1866	WMI_10_4_BTCOEX_CFG_CMDID,1867	WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID,1868	WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID,1869	WMI_10_4_PEER_GID_USERPOS_LIST_CMDID,1870	WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID,1871	WMI_10_4_COEX_VERSION_CFG_CMID,1872	WMI_10_4_PDEV_GET_RX_FILTER_CMDID,1873	WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID,1874	WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID,1875	WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID,1876	WMI_10_4_CONFIG_SMART_LOGGING_CMDID,1877	WMI_10_4_DEBUG_FATAL_CONDITION_CMDID,1878	WMI_10_4_GET_TSF_TIMER_CMDID,1879	WMI_10_4_PDEV_GET_TPC_TABLE_CMDID,1880	WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID,1881	WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID,1882	WMI_10_4_TDLS_SET_STATE_CMDID,1883	WMI_10_4_TDLS_PEER_UPDATE_CMDID,1884	WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,1885	WMI_10_4_PDEV_SEND_FD_CMDID,1886	WMI_10_4_ENABLE_FILS_CMDID,1887	WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,1888	WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,1889	WMI_10_4_RADAR_FOUND_CMDID,1890	WMI_10_4_PEER_CFR_CAPTURE_CMDID,1891	WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,1892	WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,1893};1894 1895enum wmi_10_4_event_id {1896	WMI_10_4_SERVICE_READY_EVENTID = 0x8000,1897	WMI_10_4_READY_EVENTID,1898	WMI_10_4_DEBUG_MESG_EVENTID,1899	WMI_10_4_START_EVENTID = 0x9000,1900	WMI_10_4_END_EVENTID = 0x9FFF,1901	WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,1902	WMI_10_4_ECHO_EVENTID,1903	WMI_10_4_UPDATE_STATS_EVENTID,1904	WMI_10_4_INST_RSSI_STATS_EVENTID,1905	WMI_10_4_VDEV_START_RESP_EVENTID,1906	WMI_10_4_VDEV_STANDBY_REQ_EVENTID,1907	WMI_10_4_VDEV_RESUME_REQ_EVENTID,1908	WMI_10_4_VDEV_STOPPED_EVENTID,1909	WMI_10_4_PEER_STA_KICKOUT_EVENTID,1910	WMI_10_4_HOST_SWBA_EVENTID,1911	WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,1912	WMI_10_4_MGMT_RX_EVENTID,1913	WMI_10_4_CHAN_INFO_EVENTID,1914	WMI_10_4_PHYERR_EVENTID,1915	WMI_10_4_ROAM_EVENTID,1916	WMI_10_4_PROFILE_MATCH,1917	WMI_10_4_DEBUG_PRINT_EVENTID,1918	WMI_10_4_PDEV_QVIT_EVENTID,1919	WMI_10_4_WLAN_PROFILE_DATA_EVENTID,1920	WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,1921	WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,1922	WMI_10_4_RTT_ERROR_REPORT_EVENTID,1923	WMI_10_4_RTT_KEEPALIVE_EVENTID,1924	WMI_10_4_OEM_CAPABILITY_EVENTID,1925	WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,1926	WMI_10_4_OEM_ERROR_REPORT_EVENTID,1927	WMI_10_4_NAN_EVENTID,1928	WMI_10_4_WOW_WAKEUP_HOST_EVENTID,1929	WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,1930	WMI_10_4_GTK_REKEY_FAIL_EVENTID,1931	WMI_10_4_DCS_INTERFERENCE_EVENTID,1932	WMI_10_4_PDEV_TPC_CONFIG_EVENTID,1933	WMI_10_4_CSA_HANDLING_EVENTID,1934	WMI_10_4_GPIO_INPUT_EVENTID,1935	WMI_10_4_PEER_RATECODE_LIST_EVENTID,1936	WMI_10_4_GENERIC_BUFFER_EVENTID,1937	WMI_10_4_MCAST_BUF_RELEASE_EVENTID,1938	WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,1939	WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,1940	WMI_10_4_WDS_PEER_EVENTID,1941	WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,1942	WMI_10_4_PDEV_FIPS_EVENTID,1943	WMI_10_4_TT_STATS_EVENTID,1944	WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,1945	WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,1946	WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,1947	WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,1948	WMI_10_4_PDEV_NFCAL_POWER_EVENTID,1949	WMI_10_4_PDEV_TPC_EVENTID,1950	WMI_10_4_PDEV_GET_AST_INFO_EVENTID,1951	WMI_10_4_PDEV_TEMPERATURE_EVENTID,1952	WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,1953	WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,1954	WMI_10_4_MU_REPORT_EVENTID,1955	WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID,1956	WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID,1957	WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID,1958	WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID,1959	WMI_10_4_ATF_PEER_STATS_EVENTID,1960	WMI_10_4_PDEV_GET_RX_FILTER_EVENTID,1961	WMI_10_4_NAC_RSSI_EVENTID,1962	WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID,1963	WMI_10_4_GET_TSF_TIMER_RESP_EVENTID,1964	WMI_10_4_PDEV_TPC_TABLE_EVENTID,1965	WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID,1966	WMI_10_4_TDLS_PEER_EVENTID,1967	WMI_10_4_HOST_SWFDA_EVENTID,1968	WMI_10_4_ESP_ESTIMATE_EVENTID,1969	WMI_10_4_DFS_STATUS_CHECK_EVENTID,1970	WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,1971};1972 1973enum wmi_phy_mode {1974	MODE_11A        = 0,   /* 11a Mode */1975	MODE_11G        = 1,   /* 11b/g Mode */1976	MODE_11B        = 2,   /* 11b Mode */1977	MODE_11GONLY    = 3,   /* 11g only Mode */1978	MODE_11NA_HT20   = 4,  /* 11a HT20 mode */1979	MODE_11NG_HT20   = 5,  /* 11g HT20 mode */1980	MODE_11NA_HT40   = 6,  /* 11a HT40 mode */1981	MODE_11NG_HT40   = 7,  /* 11g HT40 mode */1982	MODE_11AC_VHT20 = 8,1983	MODE_11AC_VHT40 = 9,1984	MODE_11AC_VHT80 = 10,1985	/*    MODE_11AC_VHT160 = 11, */1986	MODE_11AC_VHT20_2G = 11,1987	MODE_11AC_VHT40_2G = 12,1988	MODE_11AC_VHT80_2G = 13,1989	MODE_11AC_VHT80_80 = 14,1990	MODE_11AC_VHT160 = 15,1991	MODE_UNKNOWN    = 16,1992	MODE_MAX        = 161993};1994 1995static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)1996{1997	switch (mode) {1998	case MODE_11A:1999		return "11a";2000	case MODE_11G:2001		return "11g";2002	case MODE_11B:2003		return "11b";2004	case MODE_11GONLY:2005		return "11gonly";2006	case MODE_11NA_HT20:2007		return "11na-ht20";2008	case MODE_11NG_HT20:2009		return "11ng-ht20";2010	case MODE_11NA_HT40:2011		return "11na-ht40";2012	case MODE_11NG_HT40:2013		return "11ng-ht40";2014	case MODE_11AC_VHT20:2015		return "11ac-vht20";2016	case MODE_11AC_VHT40:2017		return "11ac-vht40";2018	case MODE_11AC_VHT80:2019		return "11ac-vht80";2020	case MODE_11AC_VHT160:2021		return "11ac-vht160";2022	case MODE_11AC_VHT80_80:2023		return "11ac-vht80+80";2024	case MODE_11AC_VHT20_2G:2025		return "11ac-vht20-2g";2026	case MODE_11AC_VHT40_2G:2027		return "11ac-vht40-2g";2028	case MODE_11AC_VHT80_2G:2029		return "11ac-vht80-2g";2030	case MODE_UNKNOWN:2031		/* skip */2032		break;2033 2034		/* no default handler to allow compiler to check that the2035		 * enum is fully handled2036		 */2037	}2038 2039	return "<unknown>";2040}2041 2042#define WMI_CHAN_LIST_TAG	0x12043#define WMI_SSID_LIST_TAG	0x22044#define WMI_BSSID_LIST_TAG	0x32045#define WMI_IE_TAG		0x42046 2047struct wmi_channel {2048	__le32 mhz;2049	__le32 band_center_freq1;2050	__le32 band_center_freq2; /* valid for 11ac, 80plus80 */2051	union {2052		__le32 flags; /* WMI_CHAN_FLAG_ */2053		struct {2054			u8 mode; /* only 6 LSBs */2055		} __packed;2056	} __packed;2057	union {2058		__le32 reginfo0;2059		struct {2060			/* note: power unit is 0.5 dBm */2061			u8 min_power;2062			u8 max_power;2063			u8 reg_power;2064			u8 reg_classid;2065		} __packed;2066	} __packed;2067	union {2068		__le32 reginfo1;2069		struct {2070			/* note: power unit is 1 dBm */2071			u8 antenna_max;2072			/* note: power unit is 0.5 dBm */2073			u8 max_tx_power;2074		} __packed;2075	} __packed;2076} __packed;2077 2078struct wmi_channel_arg {2079	u32 freq;2080	u32 band_center_freq1;2081	u32 band_center_freq2;2082	bool passive;2083	bool allow_ibss;2084	bool allow_ht;2085	bool allow_vht;2086	bool ht40plus;2087	bool chan_radar;2088	/* note: power unit is 0.5 dBm */2089	u32 min_power;2090	u32 max_power;2091	u32 max_reg_power;2092	/* note: power unit is 1 dBm */2093	u32 max_antenna_gain;2094	u32 reg_class_id;2095	enum wmi_phy_mode mode;2096};2097 2098enum wmi_channel_change_cause {2099	WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,2100	WMI_CHANNEL_CHANGE_CAUSE_CSA,2101};2102 2103#define WMI_CHAN_FLAG_HT40_PLUS      (1 << 6)2104#define WMI_CHAN_FLAG_PASSIVE        (1 << 7)2105#define WMI_CHAN_FLAG_ADHOC_ALLOWED  (1 << 8)2106#define WMI_CHAN_FLAG_AP_DISABLED    (1 << 9)2107#define WMI_CHAN_FLAG_DFS            (1 << 10)2108#define WMI_CHAN_FLAG_ALLOW_HT       (1 << 11)2109#define WMI_CHAN_FLAG_ALLOW_VHT      (1 << 12)2110 2111/* Indicate reason for channel switch */2112#define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)2113/* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/2114#define WMI_CHAN_FLAG_DFS_CFREQ2  (1 << 15)2115#define WMI_MAX_SPATIAL_STREAM        3 /* default max ss */2116 2117/* HT Capabilities*/2118#define WMI_HT_CAP_ENABLED                0x0001   /* HT Enabled/ disabled */2119#define WMI_HT_CAP_HT20_SGI       0x0002   /* Short Guard Interval with HT20 */2120#define WMI_HT_CAP_DYNAMIC_SMPS           0x0004   /* Dynamic MIMO powersave */2121#define WMI_HT_CAP_TX_STBC                0x0008   /* B3 TX STBC */2122#define WMI_HT_CAP_TX_STBC_MASK_SHIFT     32123#define WMI_HT_CAP_RX_STBC                0x0030   /* B4-B5 RX STBC */2124#define WMI_HT_CAP_RX_STBC_MASK_SHIFT     42125#define WMI_HT_CAP_LDPC                   0x0040   /* LDPC supported */2126#define WMI_HT_CAP_L_SIG_TXOP_PROT        0x0080   /* L-SIG TXOP Protection */2127#define WMI_HT_CAP_MPDU_DENSITY           0x0700   /* MPDU Density */2128#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 82129#define WMI_HT_CAP_HT40_SGI               0x08002130#define WMI_HT_CAP_RX_LDPC                0x1000   /* LDPC RX support */2131#define WMI_HT_CAP_TX_LDPC                0x2000   /* LDPC TX support */2132 2133#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED       | \2134				WMI_HT_CAP_HT20_SGI      | \2135				WMI_HT_CAP_HT40_SGI      | \2136				WMI_HT_CAP_TX_STBC       | \2137				WMI_HT_CAP_RX_STBC       | \2138				WMI_HT_CAP_LDPC)2139 2140/*2141 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information2142 * field. The fields not defined here are not supported, or reserved.2143 * Do not change these masks and if you have to add new one follow the2144 * bitmask as specified by 802.11ac draft.2145 */2146 2147#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK            0x000000032148#define WMI_VHT_CAP_RX_LDPC                      0x000000102149#define WMI_VHT_CAP_SGI_80MHZ                    0x000000202150#define WMI_VHT_CAP_SGI_160MHZ                   0x000000402151#define WMI_VHT_CAP_TX_STBC                      0x000000802152#define WMI_VHT_CAP_RX_STBC_MASK                 0x000003002153#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT           82154#define WMI_VHT_CAP_SU_BFER                      0x000008002155#define WMI_VHT_CAP_SU_BFEE                      0x000010002156#define WMI_VHT_CAP_MAX_CS_ANT_MASK              0x0000E0002157#define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT        132158#define WMI_VHT_CAP_MAX_SND_DIM_MASK             0x000700002159#define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT       162160#define WMI_VHT_CAP_MU_BFER                      0x000800002161#define WMI_VHT_CAP_MU_BFEE                      0x001000002162#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP            0x038000002163#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT      232164#define WMI_VHT_CAP_RX_FIXED_ANT                 0x100000002165#define WMI_VHT_CAP_TX_FIXED_ANT                 0x200000002166 2167/* The following also refer for max HT AMSDU */2168#define WMI_VHT_CAP_MAX_MPDU_LEN_3839            0x000000002169#define WMI_VHT_CAP_MAX_MPDU_LEN_7935            0x000000012170#define WMI_VHT_CAP_MAX_MPDU_LEN_11454           0x000000022171 2172#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  | \2173				 WMI_VHT_CAP_RX_LDPC             | \2174				 WMI_VHT_CAP_SGI_80MHZ           | \2175				 WMI_VHT_CAP_TX_STBC             | \2176				 WMI_VHT_CAP_RX_STBC_MASK        | \2177				 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP   | \2178				 WMI_VHT_CAP_RX_FIXED_ANT        | \2179				 WMI_VHT_CAP_TX_FIXED_ANT)2180 2181/*2182 * Interested readers refer to Rx/Tx MCS Map definition as defined in2183 * 802.11ac2184 */2185#define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss)      ((3 & (r)) << (((ss) - 1) << 1))2186#define WMI_VHT_MAX_SUPP_RATE_MASK           0x1fff00002187#define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT     162188 2189enum {2190	REGDMN_MODE_11A              = 0x00001, /* 11a channels */2191	REGDMN_MODE_TURBO            = 0x00002, /* 11a turbo-only channels */2192	REGDMN_MODE_11B              = 0x00004, /* 11b channels */2193	REGDMN_MODE_PUREG            = 0x00008, /* 11g channels (OFDM only) */2194	REGDMN_MODE_11G              = 0x00008, /* XXX historical */2195	REGDMN_MODE_108G             = 0x00020, /* 11a+Turbo channels */2196	REGDMN_MODE_108A             = 0x00040, /* 11g+Turbo channels */2197	REGDMN_MODE_XR               = 0x00100, /* XR channels */2198	REGDMN_MODE_11A_HALF_RATE    = 0x00200, /* 11A half rate channels */2199	REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */2200	REGDMN_MODE_11NG_HT20        = 0x00800, /* 11N-G HT20 channels */2201	REGDMN_MODE_11NA_HT20        = 0x01000, /* 11N-A HT20 channels */2202	REGDMN_MODE_11NG_HT40PLUS    = 0x02000, /* 11N-G HT40 + channels */2203	REGDMN_MODE_11NG_HT40MINUS   = 0x04000, /* 11N-G HT40 - channels */2204	REGDMN_MODE_11NA_HT40PLUS    = 0x08000, /* 11N-A HT40 + channels */2205	REGDMN_MODE_11NA_HT40MINUS   = 0x10000, /* 11N-A HT40 - channels */2206	REGDMN_MODE_11AC_VHT20       = 0x20000, /* 5Ghz, VHT20 */2207	REGDMN_MODE_11AC_VHT40PLUS   = 0x40000, /* 5Ghz, VHT40 + channels */2208	REGDMN_MODE_11AC_VHT40MINUS  = 0x80000, /* 5Ghz  VHT40 - channels */2209	REGDMN_MODE_11AC_VHT80       = 0x100000, /* 5Ghz, VHT80 channels */2210	REGDMN_MODE_11AC_VHT160      = 0x200000,     /* 5Ghz, VHT160 channels */2211	REGDMN_MODE_11AC_VHT80_80    = 0x400000,     /* 5Ghz, VHT80+80 channels */2212	REGDMN_MODE_ALL              = 0xffffffff2213};2214 2215#define REGDMN_CAP1_CHAN_HALF_RATE        0x000000012216#define REGDMN_CAP1_CHAN_QUARTER_RATE     0x000000022217#define REGDMN_CAP1_CHAN_HAL49GHZ         0x000000042218 2219/* regulatory capabilities */2220#define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND   0x00402221#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN    0x00802222#define REGDMN_EEPROM_EEREGCAP_EN_KK_U2         0x01002223#define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND    0x02002224#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD     0x04002225#define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A    0x08002226 2227struct hal_reg_capabilities {2228	/* regdomain value specified in EEPROM */2229	__le32 eeprom_rd;2230	/*regdomain */2231	__le32 eeprom_rd_ext;2232	/* CAP1 capabilities bit map. */2233	__le32 regcap1;2234	/* REGDMN EEPROM CAP. */2235	__le32 regcap2;2236	/* REGDMN MODE */2237	__le32 wireless_modes;2238	__le32 low_2ghz_chan;2239	__le32 high_2ghz_chan;2240	__le32 low_5ghz_chan;2241	__le32 high_5ghz_chan;2242} __packed;2243 2244enum wlan_mode_capability {2245	WHAL_WLAN_11A_CAPABILITY   = 0x1,2246	WHAL_WLAN_11G_CAPABILITY   = 0x2,2247	WHAL_WLAN_11AG_CAPABILITY  = 0x3,2248};2249 2250/* structure used by FW for requesting host memory */2251struct wlan_host_mem_req {2252	/* ID of the request */2253	__le32 req_id;2254	/* size of the  of each unit */2255	__le32 unit_size;2256	/* flags to  indicate that2257	 * the number units is dependent2258	 * on number of resources(num vdevs num peers .. etc)2259	 */2260	__le32 num_unit_info;2261	/*2262	 * actual number of units to allocate . if flags in the num_unit_info2263	 * indicate that number of units is tied to number of a particular2264	 * resource to allocate then  num_units filed is set to 0 and host2265	 * will derive the number units from number of the resources it is2266	 * requesting.2267	 */2268	__le32 num_units;2269} __packed;2270 2271/*2272 * The following struct holds optional payload for2273 * wmi_service_ready_event,e.g., 11ac pass some of the2274 * device capability to the host.2275 */2276struct wmi_service_ready_event {2277	__le32 sw_version;2278	__le32 sw_version_1;2279	__le32 abi_version;2280	/* WMI_PHY_CAPABILITY */2281	__le32 phy_capability;2282	/* Maximum number of frag table entries that SW will populate less 1 */2283	__le32 max_frag_entry;2284	__le32 wmi_service_bitmap[16];2285	__le32 num_rf_chains;2286	/*2287	 * The following field is only valid for service type2288	 * WMI_SERVICE_11AC2289	 */2290	__le32 ht_cap_info; /* WMI HT Capability */2291	__le32 vht_cap_info; /* VHT capability info field of 802.11ac */2292	__le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */2293	__le32 hw_min_tx_power;2294	__le32 hw_max_tx_power;2295	struct hal_reg_capabilities hal_reg_capabilities;2296	__le32 sys_cap_info;2297	__le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */2298	/*2299	 * Max beacon and Probe Response IE offload size2300	 * (includes optional P2P IEs)2301	 */2302	__le32 max_bcn_ie_size;2303	/*2304	 * request to host to allocate a chuck of memory and pss it down to FW2305	 * via WM_INIT. FW uses this as FW extesnsion memory for saving its2306	 * data structures. Only valid for low latency interfaces like PCIE2307	 * where FW can access this memory directly (or) by DMA.2308	 */2309	__le32 num_mem_reqs;2310	struct wlan_host_mem_req mem_reqs[];2311} __packed;2312 2313/* This is the definition from 10.X firmware branch */2314struct wmi_10x_service_ready_event {2315	__le32 sw_version;2316	__le32 abi_version;2317 2318	/* WMI_PHY_CAPABILITY */2319	__le32 phy_capability;2320 2321	/* Maximum number of frag table entries that SW will populate less 1 */2322	__le32 max_frag_entry;2323	__le32 wmi_service_bitmap[16];2324	__le32 num_rf_chains;2325 2326	/*2327	 * The following field is only valid for service type2328	 * WMI_SERVICE_11AC2329	 */2330	__le32 ht_cap_info; /* WMI HT Capability */2331	__le32 vht_cap_info; /* VHT capability info field of 802.11ac */2332	__le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */2333	__le32 hw_min_tx_power;2334	__le32 hw_max_tx_power;2335 2336	struct hal_reg_capabilities hal_reg_capabilities;2337 2338	__le32 sys_cap_info;2339	__le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */2340 2341	/*2342	 * request to host to allocate a chuck of memory and pss it down to FW2343	 * via WM_INIT. FW uses this as FW extesnsion memory for saving its2344	 * data structures. Only valid for low latency interfaces like PCIE2345	 * where FW can access this memory directly (or) by DMA.2346	 */2347	__le32 num_mem_reqs;2348 2349	struct wlan_host_mem_req mem_reqs[];2350} __packed;2351 2352#define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)2353#define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)2354 2355struct wmi_ready_event {2356	__le32 sw_version;2357	__le32 abi_version;2358	struct wmi_mac_addr mac_addr;2359	__le32 status;2360} __packed;2361 2362struct wmi_resource_config {2363	/* number of virtual devices (VAPs) to support */2364	__le32 num_vdevs;2365 2366	/* number of peer nodes to support */2367	__le32 num_peers;2368 2369	/*2370	 * In offload mode target supports features like WOW, chatter and2371	 * other protocol offloads. In order to support them some2372	 * functionalities like reorder buffering, PN checking need to be2373	 * done in target. This determines maximum number of peers supported2374	 * by target in offload mode2375	 */2376	__le32 num_offload_peers;2377 2378	/* For target-based RX reordering */2379	__le32 num_offload_reorder_bufs;2380 2381	/* number of keys per peer */2382	__le32 num_peer_keys;2383 2384	/* total number of TX/RX data TIDs */2385	__le32 num_tids;2386 2387	/*2388	 * max skid for resolving hash collisions2389	 *2390	 *   The address search table is sparse, so that if two MAC addresses2391	 *   result in the same hash value, the second of these conflicting2392	 *   entries can slide to the next index in the address search table,2393	 *   and use it, if it is unoccupied.  This ast_skid_limit parameter2394	 *   specifies the upper bound on how many subsequent indices to search2395	 *   over to find an unoccupied space.2396	 */2397	__le32 ast_skid_limit;2398 2399	/*2400	 * the nominal chain mask for transmit2401	 *2402	 *   The chain mask may be modified dynamically, e.g. to operate AP2403	 *   tx with a reduced number of chains if no clients are associated.2404	 *   This configuration parameter specifies the nominal chain-mask that2405	 *   should be used when not operating with a reduced set of tx chains.2406	 */2407	__le32 tx_chain_mask;2408 2409	/*2410	 * the nominal chain mask for receive2411	 *2412	 *   The chain mask may be modified dynamically, e.g. for a client2413	 *   to use a reduced number of chains for receive if the traffic to2414	 *   the client is low enough that it doesn't require downlink MIMO2415	 *   or antenna diversity.2416	 *   This configuration parameter specifies the nominal chain-mask that2417	 *   should be used when not operating with a reduced set of rx chains.2418	 */2419	__le32 rx_chain_mask;2420 2421	/*2422	 * what rx reorder timeout (ms) to use for the AC2423	 *2424	 *   Each WMM access class (voice, video, best-effort, background) will2425	 *   have its own timeout value to dictate how long to wait for missing2426	 *   rx MPDUs to arrive before flushing subsequent MPDUs that have2427	 *   already been received.2428	 *   This parameter specifies the timeout in milliseconds for each2429	 *   class.2430	 */2431	__le32 rx_timeout_pri_vi;2432	__le32 rx_timeout_pri_vo;2433	__le32 rx_timeout_pri_be;2434	__le32 rx_timeout_pri_bk;2435 2436	/*2437	 * what mode the rx should decap packets to2438	 *2439	 *   MAC can decap to RAW (no decap), native wifi or Ethernet types2440	 *   THis setting also determines the default TX behavior, however TX2441	 *   behavior can be modified on a per VAP basis during VAP init2442	 */2443	__le32 rx_decap_mode;2444 2445	/* what is the maximum number of scan requests that can be queued */2446	__le32 scan_max_pending_reqs;2447 2448	/* maximum VDEV that could use BMISS offload */2449	__le32 bmiss_offload_max_vdev;2450 2451	/* maximum VDEV that could use offload roaming */2452	__le32 roam_offload_max_vdev;2453 2454	/* maximum AP profiles that would push to offload roaming */2455	__le32 roam_offload_max_ap_profiles;2456 2457	/*2458	 * how many groups to use for mcast->ucast conversion2459	 *2460	 *   The target's WAL maintains a table to hold information regarding2461	 *   which peers belong to a given multicast group, so that if2462	 *   multicast->unicast conversion is enabled, the target can convert2463	 *   multicast tx frames to a series of unicast tx frames, to each2464	 *   peer within the multicast group.2465	     This num_mcast_groups configuration parameter tells the target how2466	 *   many multicast groups to provide storage for within its multicast2467	 *   group membership table.2468	 */2469	__le32 num_mcast_groups;2470 2471	/*2472	 * size to alloc for the mcast membership table2473	 *2474	 *   This num_mcast_table_elems configuration parameter tells the2475	 *   target how many peer elements it needs to provide storage for in2476	 *   its multicast group membership table.2477	 *   These multicast group membership table elements are shared by the2478	 *   multicast groups stored within the table.2479	 */2480	__le32 num_mcast_table_elems;2481 2482	/*2483	 * whether/how to do multicast->unicast conversion2484	 *2485	 *   This configuration parameter specifies whether the target should2486	 *   perform multicast --> unicast conversion on transmit, and if so,2487	 *   what to do if it finds no entries in its multicast group2488	 *   membership table for the multicast IP address in the tx frame.2489	 *   Configuration value:2490	 *   0 -> Do not perform multicast to unicast conversion.2491	 *   1 -> Convert multicast frames to unicast, if the IP multicast2492	 *        address from the tx frame is found in the multicast group2493	 *        membership table.  If the IP multicast address is not found,2494	 *        drop the frame.2495	 *   2 -> Convert multicast frames to unicast, if the IP multicast2496	 *        address from the tx frame is found in the multicast group2497	 *        membership table.  If the IP multicast address is not found,2498	 *        transmit the frame as multicast.2499	 */2500	__le32 mcast2ucast_mode;2501 2502	/*2503	 * how much memory to allocate for a tx PPDU dbg log2504	 *2505	 *   This parameter controls how much memory the target will allocate2506	 *   to store a log of tx PPDU meta-information (how large the PPDU2507	 *   was, when it was sent, whether it was successful, etc.)2508	 */2509	__le32 tx_dbg_log_size;2510 2511	/* how many AST entries to be allocated for WDS */2512	__le32 num_wds_entries;2513 2514	/*2515	 * MAC DMA burst size, e.g., For target PCI limit can be2516	 * 0 -default, 1 256B2517	 */2518	__le32 dma_burst_size;2519 2520	/*2521	 * Fixed delimiters to be inserted after every MPDU to2522	 * account for interface latency to avoid underrun.2523	 */2524	__le32 mac_aggr_delim;2525 2526	/*2527	 *   determine whether target is responsible for detecting duplicate2528	 *   non-aggregate MPDU and timing out stale fragments.2529	 *2530	 *   A-MPDU reordering is always performed on the target.2531	 *2532	 *   0: target responsible for frag timeout and dup checking2533	 *   1: host responsible for frag timeout and dup checking2534	 */2535	__le32 rx_skip_defrag_timeout_dup_detection_check;2536 2537	/*2538	 * Configuration for VoW :2539	 * No of Video Nodes to be supported2540	 * and Max no of descriptors for each Video link (node).2541	 */2542	__le32 vow_config;2543 2544	/* maximum VDEV that could use GTK offload */2545	__le32 gtk_offload_max_vdev;2546 2547	/* Number of msdu descriptors target should use */2548	__le32 num_msdu_desc;2549 2550	/*2551	 * Max. number of Tx fragments per MSDU2552	 *  This parameter controls the max number of Tx fragments per MSDU.2553	 *  This is sent by the target as part of the WMI_SERVICE_READY event2554	 *  and is overridden by the OS shim as required.2555	 */2556	__le32 max_frag_entries;2557} __packed;2558 2559struct wmi_resource_config_10x {2560	/* number of virtual devices (VAPs) to support */2561	__le32 num_vdevs;2562 2563	/* number of peer nodes to support */2564	__le32 num_peers;2565 2566	/* number of keys per peer */2567	__le32 num_peer_keys;2568 2569	/* total number of TX/RX data TIDs */2570	__le32 num_tids;2571 2572	/*2573	 * max skid for resolving hash collisions2574	 *2575	 *   The address search table is sparse, so that if two MAC addresses2576	 *   result in the same hash value, the second of these conflicting2577	 *   entries can slide to the next index in the address search table,2578	 *   and use it, if it is unoccupied.  This ast_skid_limit parameter2579	 *   specifies the upper bound on how many subsequent indices to search2580	 *   over to find an unoccupied space.2581	 */2582	__le32 ast_skid_limit;2583 2584	/*2585	 * the nominal chain mask for transmit2586	 *2587	 *   The chain mask may be modified dynamically, e.g. to operate AP2588	 *   tx with a reduced number of chains if no clients are associated.2589	 *   This configuration parameter specifies the nominal chain-mask that2590	 *   should be used when not operating with a reduced set of tx chains.2591	 */2592	__le32 tx_chain_mask;2593 2594	/*2595	 * the nominal chain mask for receive2596	 *2597	 *   The chain mask may be modified dynamically, e.g. for a client2598	 *   to use a reduced number of chains for receive if the traffic to2599	 *   the client is low enough that it doesn't require downlink MIMO2600	 *   or antenna diversity.2601	 *   This configuration parameter specifies the nominal chain-mask that2602	 *   should be used when not operating with a reduced set of rx chains.2603	 */2604	__le32 rx_chain_mask;2605 2606	/*2607	 * what rx reorder timeout (ms) to use for the AC2608	 *2609	 *   Each WMM access class (voice, video, best-effort, background) will2610	 *   have its own timeout value to dictate how long to wait for missing2611	 *   rx MPDUs to arrive before flushing subsequent MPDUs that have2612	 *   already been received.2613	 *   This parameter specifies the timeout in milliseconds for each2614	 *   class.2615	 */2616	__le32 rx_timeout_pri_vi;2617	__le32 rx_timeout_pri_vo;2618	__le32 rx_timeout_pri_be;2619	__le32 rx_timeout_pri_bk;2620 2621	/*2622	 * what mode the rx should decap packets to2623	 *2624	 *   MAC can decap to RAW (no decap), native wifi or Ethernet types2625	 *   THis setting also determines the default TX behavior, however TX2626	 *   behavior can be modified on a per VAP basis during VAP init2627	 */2628	__le32 rx_decap_mode;2629 2630	/* what is the maximum number of scan requests that can be queued */2631	__le32 scan_max_pending_reqs;2632 2633	/* maximum VDEV that could use BMISS offload */2634	__le32 bmiss_offload_max_vdev;2635 2636	/* maximum VDEV that could use offload roaming */2637	__le32 roam_offload_max_vdev;2638 2639	/* maximum AP profiles that would push to offload roaming */2640	__le32 roam_offload_max_ap_profiles;2641 2642	/*2643	 * how many groups to use for mcast->ucast conversion2644	 *2645	 *   The target's WAL maintains a table to hold information regarding2646	 *   which peers belong to a given multicast group, so that if2647	 *   multicast->unicast conversion is enabled, the target can convert2648	 *   multicast tx frames to a series of unicast tx frames, to each2649	 *   peer within the multicast group.2650	     This num_mcast_groups configuration parameter tells the target how2651	 *   many multicast groups to provide storage for within its multicast2652	 *   group membership table.2653	 */2654	__le32 num_mcast_groups;2655 2656	/*2657	 * size to alloc for the mcast membership table2658	 *2659	 *   This num_mcast_table_elems configuration parameter tells the2660	 *   target how many peer elements it needs to provide storage for in2661	 *   its multicast group membership table.2662	 *   These multicast group membership table elements are shared by the2663	 *   multicast groups stored within the table.2664	 */2665	__le32 num_mcast_table_elems;2666 2667	/*2668	 * whether/how to do multicast->unicast conversion2669	 *2670	 *   This configuration parameter specifies whether the target should2671	 *   perform multicast --> unicast conversion on transmit, and if so,2672	 *   what to do if it finds no entries in its multicast group2673	 *   membership table for the multicast IP address in the tx frame.2674	 *   Configuration value:2675	 *   0 -> Do not perform multicast to unicast conversion.2676	 *   1 -> Convert multicast frames to unicast, if the IP multicast2677	 *        address from the tx frame is found in the multicast group2678	 *        membership table.  If the IP multicast address is not found,2679	 *        drop the frame.2680	 *   2 -> Convert multicast frames to unicast, if the IP multicast2681	 *        address from the tx frame is found in the multicast group2682	 *        membership table.  If the IP multicast address is not found,2683	 *        transmit the frame as multicast.2684	 */2685	__le32 mcast2ucast_mode;2686 2687	/*2688	 * how much memory to allocate for a tx PPDU dbg log2689	 *2690	 *   This parameter controls how much memory the target will allocate2691	 *   to store a log of tx PPDU meta-information (how large the PPDU2692	 *   was, when it was sent, whether it was successful, etc.)2693	 */2694	__le32 tx_dbg_log_size;2695 2696	/* how many AST entries to be allocated for WDS */2697	__le32 num_wds_entries;2698 2699	/*2700	 * MAC DMA burst size, e.g., For target PCI limit can be2701	 * 0 -default, 1 256B2702	 */2703	__le32 dma_burst_size;2704 2705	/*2706	 * Fixed delimiters to be inserted after every MPDU to2707	 * account for interface latency to avoid underrun.2708	 */2709	__le32 mac_aggr_delim;2710 2711	/*2712	 *   determine whether target is responsible for detecting duplicate2713	 *   non-aggregate MPDU and timing out stale fragments.2714	 *2715	 *   A-MPDU reordering is always performed on the target.2716	 *2717	 *   0: target responsible for frag timeout and dup checking2718	 *   1: host responsible for frag timeout and dup checking2719	 */2720	__le32 rx_skip_defrag_timeout_dup_detection_check;2721 2722	/*2723	 * Configuration for VoW :2724	 * No of Video Nodes to be supported2725	 * and Max no of descriptors for each Video link (node).2726	 */2727	__le32 vow_config;2728 2729	/* Number of msdu descriptors target should use */2730	__le32 num_msdu_desc;2731 2732	/*2733	 * Max. number of Tx fragments per MSDU2734	 *  This parameter controls the max number of Tx fragments per MSDU.2735	 *  This is sent by the target as part of the WMI_SERVICE_READY event2736	 *  and is overridden by the OS shim as required.2737	 */2738	__le32 max_frag_entries;2739} __packed;2740 2741enum wmi_10_2_feature_mask {2742	WMI_10_2_RX_BATCH_MODE = BIT(0),2743	WMI_10_2_ATF_CONFIG    = BIT(1),2744	WMI_10_2_COEX_GPIO     = BIT(3),2745	WMI_10_2_BSS_CHAN_INFO = BIT(6),2746	WMI_10_2_PEER_STATS    = BIT(7),2747};2748 2749struct wmi_resource_config_10_2 {2750	struct wmi_resource_config_10x common;2751	__le32 max_peer_ext_stats;2752	__le32 smart_ant_cap; /* 0-disable, 1-enable */2753	__le32 bk_min_free;2754	__le32 be_min_free;2755	__le32 vi_min_free;2756	__le32 vo_min_free;2757	__le32 feature_mask;2758} __packed;2759 2760#define NUM_UNITS_IS_NUM_VDEVS         BIT(0)2761#define NUM_UNITS_IS_NUM_PEERS         BIT(1)2762#define NUM_UNITS_IS_NUM_ACTIVE_PEERS  BIT(2)2763 2764struct wmi_resource_config_10_4 {2765	/* Number of virtual devices (VAPs) to support */2766	__le32 num_vdevs;2767 2768	/* Number of peer nodes to support */2769	__le32 num_peers;2770 2771	/* Number of active peer nodes to support */2772	__le32 num_active_peers;2773 2774	/* In offload mode, target supports features like WOW, chatter and other2775	 * protocol offloads. In order to support them some functionalities like2776	 * reorder buffering, PN checking need to be done in target.2777	 * This determines maximum number of peers supported by target in2778	 * offload mode.2779	 */2780	__le32 num_offload_peers;2781 2782	/* Number of reorder buffers available for doing target based reorder2783	 * Rx reorder buffering2784	 */2785	__le32 num_offload_reorder_buffs;2786 2787	/* Number of keys per peer */2788	__le32 num_peer_keys;2789 2790	/* Total number of TX/RX data TIDs */2791	__le32 num_tids;2792 2793	/* Max skid for resolving hash collisions.2794	 * The address search table is sparse, so that if two MAC addresses2795	 * result in the same hash value, the second of these conflicting2796	 * entries can slide to the next index in the address search table,2797	 * and use it, if it is unoccupied.  This ast_skid_limit parameter2798	 * specifies the upper bound on how many subsequent indices to search2799	 * over to find an unoccupied space.2800	 */2801	__le32 ast_skid_limit;2802 2803	/* The nominal chain mask for transmit.2804	 * The chain mask may be modified dynamically, e.g. to operate AP tx2805	 * with a reduced number of chains if no clients are associated.2806	 * This configuration parameter specifies the nominal chain-mask that2807	 * should be used when not operating with a reduced set of tx chains.2808	 */2809	__le32 tx_chain_mask;2810 2811	/* The nominal chain mask for receive.2812	 * The chain mask may be modified dynamically, e.g. for a client to use2813	 * a reduced number of chains for receive if the traffic to the client2814	 * is low enough that it doesn't require downlink MIMO or antenna2815	 * diversity. This configuration parameter specifies the nominal2816	 * chain-mask that should be used when not operating with a reduced2817	 * set of rx chains.2818	 */2819	__le32 rx_chain_mask;2820 2821	/* What rx reorder timeout (ms) to use for the AC.2822	 * Each WMM access class (voice, video, best-effort, background) will2823	 * have its own timeout value to dictate how long to wait for missing2824	 * rx MPDUs to arrive before flushing subsequent MPDUs that have already2825	 * been received. This parameter specifies the timeout in milliseconds2826	 * for each class.2827	 */2828	__le32 rx_timeout_pri[4];2829 2830	/* What mode the rx should decap packets to.2831	 * MAC can decap to RAW (no decap), native wifi or Ethernet types.2832	 * This setting also determines the default TX behavior, however TX2833	 * behavior can be modified on a per VAP basis during VAP init2834	 */2835	__le32 rx_decap_mode;2836 2837	__le32 scan_max_pending_req;2838 2839	__le32 bmiss_offload_max_vdev;2840 2841	__le32 roam_offload_max_vdev;2842 2843	__le32 roam_offload_max_ap_profiles;2844 2845	/* How many groups to use for mcast->ucast conversion.2846	 * The target's WAL maintains a table to hold information regarding2847	 * which peers belong to a given multicast group, so that if2848	 * multicast->unicast conversion is enabled, the target can convert2849	 * multicast tx frames to a series of unicast tx frames, to each peer2850	 * within the multicast group. This num_mcast_groups configuration2851	 * parameter tells the target how many multicast groups to provide2852	 * storage for within its multicast group membership table.2853	 */2854	__le32 num_mcast_groups;2855 2856	/* Size to alloc for the mcast membership table.2857	 * This num_mcast_table_elems configuration parameter tells the target2858	 * how many peer elements it needs to provide storage for in its2859	 * multicast group membership table. These multicast group membership2860	 * table elements are shared by the multicast groups stored within2861	 * the table.2862	 */2863	__le32 num_mcast_table_elems;2864 2865	/* Whether/how to do multicast->unicast conversion.2866	 * This configuration parameter specifies whether the target should2867	 * perform multicast --> unicast conversion on transmit, and if so,2868	 * what to do if it finds no entries in its multicast group membership2869	 * table for the multicast IP address in the tx frame.2870	 * Configuration value:2871	 * 0 -> Do not perform multicast to unicast conversion.2872	 * 1 -> Convert multicast frames to unicast, if the IP multicast address2873	 *      from the tx frame is found in the multicast group membership2874	 *      table.  If the IP multicast address is not found, drop the frame2875	 * 2 -> Convert multicast frames to unicast, if the IP multicast address2876	 *      from the tx frame is found in the multicast group membership2877	 *      table.  If the IP multicast address is not found, transmit the2878	 *      frame as multicast.2879	 */2880	__le32 mcast2ucast_mode;2881 2882	/* How much memory to allocate for a tx PPDU dbg log.2883	 * This parameter controls how much memory the target will allocate to2884	 * store a log of tx PPDU meta-information (how large the PPDU was,2885	 * when it was sent, whether it was successful, etc.)2886	 */2887	__le32 tx_dbg_log_size;2888 2889	/* How many AST entries to be allocated for WDS */2890	__le32 num_wds_entries;2891 2892	/* MAC DMA burst size. 0 -default, 1 -256B */2893	__le32 dma_burst_size;2894 2895	/* Fixed delimiters to be inserted after every MPDU to account for2896	 * interface latency to avoid underrun.2897	 */2898	__le32 mac_aggr_delim;2899 2900	/* Determine whether target is responsible for detecting duplicate2901	 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering2902	 * is always performed on the target.2903	 *2904	 * 0: target responsible for frag timeout and dup checking2905	 * 1: host responsible for frag timeout and dup checking2906	 */2907	__le32 rx_skip_defrag_timeout_dup_detection_check;2908 2909	/* Configuration for VoW : No of Video nodes to be supported and max2910	 * no of descriptors for each video link (node).2911	 */2912	__le32 vow_config;2913 2914	/* Maximum vdev that could use gtk offload */2915	__le32 gtk_offload_max_vdev;2916 2917	/* Number of msdu descriptors target should use */2918	__le32 num_msdu_desc;2919 2920	/* Max number of tx fragments per MSDU.2921	 * This parameter controls the max number of tx fragments per MSDU.2922	 * This will passed by target as part of the WMI_SERVICE_READY event2923	 * and is overridden by the OS shim as required.2924	 */2925	__le32 max_frag_entries;2926 2927	/* Max number of extended peer stats.2928	 * This parameter controls the max number of peers for which extended2929	 * statistics are supported by target2930	 */2931	__le32 max_peer_ext_stats;2932 2933	/* Smart antenna capabilities information.2934	 * 1 - Smart antenna is enabled2935	 * 0 - Smart antenna is disabled2936	 * In future this can contain smart antenna specific capabilities.2937	 */2938	__le32 smart_ant_cap;2939 2940	/* User can configure the buffers allocated for each AC (BE, BK, VI, VO)2941	 * during init.2942	 */2943	__le32 bk_minfree;2944	__le32 be_minfree;2945	__le32 vi_minfree;2946	__le32 vo_minfree;2947 2948	/* Rx batch mode capability.2949	 * 1 - Rx batch mode enabled2950	 * 0 - Rx batch mode disabled2951	 */2952	__le32 rx_batchmode;2953 2954	/* Thermal throttling capability.2955	 * 1 - Capable of thermal throttling2956	 * 0 - Not capable of thermal throttling2957	 */2958	__le32 tt_support;2959 2960	/* ATF configuration.2961	 * 1  - Enable ATF2962	 * 0  - Disable ATF2963	 */2964	__le32 atf_config;2965 2966	/* Configure padding to manage IP header un-alignment2967	 * 1  - Enable padding2968	 * 0  - Disable padding2969	 */2970	__le32 iphdr_pad_config;2971 2972	/* qwrap configuration (bits 15-0)2973	 * 1  - This is qwrap configuration2974	 * 0  - This is not qwrap2975	 *2976	 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)2977	 * In order to get ack-RSSI reporting and to specify the tx-rate for2978	 * individual frames, this option must be enabled.  This uses an extra2979	 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.2980	 */2981	__le32 qwrap_config;2982} __packed;2983 2984enum wmi_coex_version {2985	WMI_NO_COEX_VERSION_SUPPORT	= 0,2986	/* 3 wire coex support*/2987	WMI_COEX_VERSION_1		= 1,2988	/* 2.5 wire coex support*/2989	WMI_COEX_VERSION_2		= 2,2990	/* 2.5 wire coex with duty cycle support */2991	WMI_COEX_VERSION_3		= 3,2992	/* 4 wire coex support*/2993	WMI_COEX_VERSION_4		= 4,2994};2995 2996/**2997 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags2998 * @WMI_10_4_LTEU_SUPPORT: LTEU config2999 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config3000 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan3001 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan3002 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats3003 * @WMI_10_4_PEER_STATS: Per station stats3004 * @WMI_10_4_VDEV_STATS: Per vdev stats3005 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable3006 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable3007 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable3008 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable3009 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host3010 *	enable/disable3011 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY: Explicit TDLS mode enable/disable3012 * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable3013 * @WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT:  Firmware supports Extended Peer3014 *	TID configuration for QoS related settings3015 * @WMI_10_4_REPORT_AIRTIME: Firmware supports transmit airtime reporting3016 */3017enum wmi_10_4_feature_mask {3018	WMI_10_4_LTEU_SUPPORT			= BIT(0),3019	WMI_10_4_COEX_GPIO_SUPPORT		= BIT(1),3020	WMI_10_4_AUX_RADIO_SPECTRAL_INTF	= BIT(2),3021	WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF	= BIT(3),3022	WMI_10_4_BSS_CHANNEL_INFO_64		= BIT(4),3023	WMI_10_4_PEER_STATS			= BIT(5),3024	WMI_10_4_VDEV_STATS			= BIT(6),3025	WMI_10_4_TDLS				= BIT(7),3026	WMI_10_4_TDLS_OFFCHAN			= BIT(8),3027	WMI_10_4_TDLS_UAPSD_BUFFER_STA		= BIT(9),3028	WMI_10_4_TDLS_UAPSD_SLEEP_STA		= BIT(10),3029	WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11),3030	WMI_10_4_TDLS_EXPLICIT_MODE_ONLY	= BIT(12),3031	WMI_10_4_TX_DATA_ACK_RSSI               = BIT(16),3032	WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT	= BIT(17),3033	WMI_10_4_REPORT_AIRTIME			= BIT(18),3034 3035};3036 3037/* WMI_GPIO_CONFIG_CMDID */3038enum {3039	WMI_GPIO_PULL_NONE,3040	WMI_GPIO_PULL_UP,3041	WMI_GPIO_PULL_DOWN,3042};3043 3044enum {3045	WMI_GPIO_INTTYPE_DISABLE,3046	WMI_GPIO_INTTYPE_RISING_EDGE,3047	WMI_GPIO_INTTYPE_FALLING_EDGE,3048	WMI_GPIO_INTTYPE_BOTH_EDGE,3049	WMI_GPIO_INTTYPE_LEVEL_LOW,3050	WMI_GPIO_INTTYPE_LEVEL_HIGH3051};3052 3053/* WMI_GPIO_CONFIG_CMDID */3054struct wmi_gpio_config_cmd {3055	__le32 gpio_num;             /* GPIO number to be setup */3056	__le32 input;                /* 0 - Output/ 1 - Input */3057	__le32 pull_type;            /* Pull type defined above */3058	__le32 intr_mode;            /* Interrupt mode defined above (Input) */3059} __packed;3060 3061/* WMI_GPIO_OUTPUT_CMDID */3062struct wmi_gpio_output_cmd {3063	__le32 gpio_num;    /* GPIO number to be setup */3064	__le32 set;         /* Set the GPIO pin*/3065} __packed;3066 3067/* WMI_GPIO_INPUT_EVENTID */3068struct wmi_gpio_input_event {3069	__le32 gpio_num;    /* GPIO number which changed state */3070} __packed;3071 3072struct wmi_ext_resource_config_10_4_cmd {3073	/* contains enum wmi_host_platform_type */3074	__le32 host_platform_config;3075	/* see enum wmi_10_4_feature_mask */3076	__le32 fw_feature_bitmap;3077	/* WLAN priority GPIO number */3078	__le32 wlan_gpio_priority;3079	/* see enum wmi_coex_version */3080	__le32 coex_version;3081	/* COEX GPIO config */3082	__le32 coex_gpio_pin1;3083	__le32 coex_gpio_pin2;3084	__le32 coex_gpio_pin3;3085	/* number of vdevs allowed to perform tdls */3086	__le32 num_tdls_vdevs;3087	/* number of peers to track per TDLS vdev */3088	__le32 num_tdls_conn_table_entries;3089	/* number of tdls sleep sta supported */3090	__le32 max_tdls_concurrent_sleep_sta;3091	/* number of tdls buffer sta supported */3092	__le32 max_tdls_concurrent_buffer_sta;3093};3094 3095/* structure describing host memory chunk. */3096struct host_memory_chunk {3097	/* id of the request that is passed up in service ready */3098	__le32 req_id;3099	/* the physical address the memory chunk */3100	__le32 ptr;3101	/* size of the chunk */3102	__le32 size;3103} __packed;3104 3105#define WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID 83106 3107struct wmi_host_mem_chunks {3108	__le32 count;3109	/* some fw revisions require at least 1 chunk regardless of count */3110	union {3111		struct host_memory_chunk item;3112		DECLARE_FLEX_ARRAY(struct host_memory_chunk, items);3113	};3114} __packed;3115 3116struct wmi_init_cmd {3117	struct wmi_resource_config resource_config;3118	struct wmi_host_mem_chunks mem_chunks;3119} __packed;3120 3121/* _10x structure is from 10.X FW API */3122struct wmi_init_cmd_10x {3123	struct wmi_resource_config_10x resource_config;3124	struct wmi_host_mem_chunks mem_chunks;3125} __packed;3126 3127struct wmi_init_cmd_10_2 {3128	struct wmi_resource_config_10_2 resource_config;3129	struct wmi_host_mem_chunks mem_chunks;3130} __packed;3131 3132struct wmi_init_cmd_10_4 {3133	struct wmi_resource_config_10_4 resource_config;3134	struct wmi_host_mem_chunks mem_chunks;3135} __packed;3136 3137struct wmi_chan_list_entry {3138	__le16 freq;3139	u8 phy_mode; /* valid for 10.2 only */3140	u8 reserved;3141} __packed;3142 3143/* TLV for channel list */3144struct wmi_chan_list {3145	__le32 tag; /* WMI_CHAN_LIST_TAG */3146	__le32 num_chan;3147	struct wmi_chan_list_entry channel_list[];3148} __packed;3149 3150struct wmi_bssid_list {3151	__le32 tag; /* WMI_BSSID_LIST_TAG */3152	__le32 num_bssid;3153	struct wmi_mac_addr bssid_list[];3154} __packed;3155 3156struct wmi_ie_data {3157	__le32 tag; /* WMI_IE_TAG */3158	__le32 ie_len;3159	u8 ie_data[];3160} __packed;3161 3162struct wmi_ssid {3163	__le32 ssid_len;3164	u8 ssid[32];3165} __packed;3166 3167struct wmi_ssid_list {3168	__le32 tag; /* WMI_SSID_LIST_TAG */3169	__le32 num_ssids;3170	struct wmi_ssid ssids[];3171} __packed;3172 3173/* prefix used by scan requestor ids on the host */3174#define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA0003175 3176/* prefix used by scan request ids generated on the host */3177/* host cycles through the lower 12 bits to generate ids */3178#define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA0003179 3180#define WLAN_SCAN_PARAMS_MAX_SSID    163181#define WLAN_SCAN_PARAMS_MAX_BSSID   43182#define WLAN_SCAN_PARAMS_MAX_IE_LEN  2563183 3184/* Values lower than this may be refused by some firmware revisions with a scan3185 * completion with a timedout reason.3186 */3187#define WMI_SCAN_CHAN_MIN_TIME_MSEC 403188 3189/* Scan priority numbers must be sequential, starting with 0 */3190enum wmi_scan_priority {3191	WMI_SCAN_PRIORITY_VERY_LOW = 0,3192	WMI_SCAN_PRIORITY_LOW,3193	WMI_SCAN_PRIORITY_MEDIUM,3194	WMI_SCAN_PRIORITY_HIGH,3195	WMI_SCAN_PRIORITY_VERY_HIGH,3196	WMI_SCAN_PRIORITY_COUNT   /* number of priorities supported */3197};3198 3199struct wmi_start_scan_common {3200	/* Scan ID */3201	__le32 scan_id;3202	/* Scan requestor ID */3203	__le32 scan_req_id;3204	/* VDEV id(interface) that is requesting scan */3205	__le32 vdev_id;3206	/* Scan Priority, input to scan scheduler */3207	__le32 scan_priority;3208	/* Scan events subscription */3209	__le32 notify_scan_events;3210	/* dwell time in msec on active channels */3211	__le32 dwell_time_active;3212	/* dwell time in msec on passive channels */3213	__le32 dwell_time_passive;3214	/*3215	 * min time in msec on the BSS channel,only valid if at least one3216	 * VDEV is active3217	 */3218	__le32 min_rest_time;3219	/*3220	 * max rest time in msec on the BSS channel,only valid if at least3221	 * one VDEV is active3222	 */3223	/*3224	 * the scanner will rest on the bss channel at least min_rest_time3225	 * after min_rest_time the scanner will start checking for tx/rx3226	 * activity on all VDEVs. if there is no activity the scanner will3227	 * switch to off channel. if there is activity the scanner will let3228	 * the radio on the bss channel until max_rest_time expires.at3229	 * max_rest_time scanner will switch to off channel irrespective of3230	 * activity. activity is determined by the idle_time parameter.3231	 */3232	__le32 max_rest_time;3233	/*3234	 * time before sending next set of probe requests.3235	 * The scanner keeps repeating probe requests transmission with3236	 * period specified by repeat_probe_time.3237	 * The number of probe requests specified depends on the ssid_list3238	 * and bssid_list3239	 */3240	__le32 repeat_probe_time;3241	/* time in msec between 2 consecutive probe requests with in a set. */3242	__le32 probe_spacing_time;3243	/*3244	 * data inactivity time in msec on bss channel that will be used by3245	 * scanner for measuring the inactivity.3246	 */3247	__le32 idle_time;3248	/* maximum time in msec allowed for scan  */3249	__le32 max_scan_time;3250	/*3251	 * delay in msec before sending first probe request after switching3252	 * to a channel3253	 */3254	__le32 probe_delay;3255	/* Scan control flags */3256	__le32 scan_ctrl_flags;3257} __packed;3258 3259struct wmi_start_scan_cmd {3260	struct wmi_start_scan_common common;3261	__le32 burst_duration_ms;3262	u8 tlvs[];3263} __packed;3264 3265/* This is the definition from 10.X firmware branch */3266struct wmi_10x_start_scan_cmd {3267	struct wmi_start_scan_common common;3268	u8 tlvs[];3269} __packed;3270 3271struct wmi_ssid_arg {3272	int len;3273	const u8 *ssid;3274};3275 3276struct wmi_bssid_arg {3277	const u8 *bssid;3278};3279 3280struct wmi_start_scan_arg {3281	u32 scan_id;3282	u32 scan_req_id;3283	u32 vdev_id;3284	u32 scan_priority;3285	u32 notify_scan_events;3286	u32 dwell_time_active;3287	u32 dwell_time_passive;3288	u32 min_rest_time;3289	u32 max_rest_time;3290	u32 repeat_probe_time;3291	u32 probe_spacing_time;3292	u32 idle_time;3293	u32 max_scan_time;3294	u32 probe_delay;3295	u32 scan_ctrl_flags;3296	u32 burst_duration_ms;3297 3298	u32 ie_len;3299	u32 n_channels;3300	u32 n_ssids;3301	u32 n_bssids;3302 3303	u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];3304	u16 channels[64];3305	struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];3306	struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];3307	struct wmi_mac_addr mac_addr;3308	struct wmi_mac_addr mac_mask;3309};3310 3311/* scan control flags */3312 3313/* passively scan all channels including active channels */3314#define WMI_SCAN_FLAG_PASSIVE        0x13315/* add wild card ssid probe request even though ssid_list is specified. */3316#define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x23317/* add cck rates to rates/xrate ie for the generated probe request */3318#define WMI_SCAN_ADD_CCK_RATES 0x43319/* add ofdm rates to rates/xrate ie for the generated probe request */3320#define WMI_SCAN_ADD_OFDM_RATES 0x83321/* To enable indication of Chan load and Noise floor to host */3322#define WMI_SCAN_CHAN_STAT_EVENT 0x103323/* Filter Probe request frames  */3324#define WMI_SCAN_FILTER_PROBE_REQ 0x203325/* When set, DFS channels will not be scanned */3326#define WMI_SCAN_BYPASS_DFS_CHN 0x403327/* Different FW scan engine may choose to bail out on errors.3328 * Allow the driver to have influence over that.3329 */3330#define WMI_SCAN_CONTINUE_ON_ERROR 0x803331 3332/* Use random MAC address for TA for Probe Request frame and add3333 * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.3334 * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.3335 */3336#define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ   0x10003337 3338/* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */3339#define WMI_SCAN_CLASS_MASK 0xFF0000003340 3341enum wmi_stop_scan_type {3342	WMI_SCAN_STOP_ONE	= 0x00000000, /* stop by scan_id */3343	WMI_SCAN_STOP_VDEV_ALL	= 0x01000000, /* stop by vdev_id */3344	WMI_SCAN_STOP_ALL	= 0x04000000, /* stop all scans */3345};3346 3347struct wmi_stop_scan_cmd {3348	__le32 scan_req_id;3349	__le32 scan_id;3350	__le32 req_type;3351	__le32 vdev_id;3352} __packed;3353 3354struct wmi_stop_scan_arg {3355	u32 req_id;3356	enum wmi_stop_scan_type req_type;3357	union {3358		u32 scan_id;3359		u32 vdev_id;3360	} u;3361};3362 3363struct wmi_scan_chan_list_cmd {3364	__le32 num_scan_chans;3365	struct wmi_channel chan_info[];3366} __packed;3367 3368struct wmi_scan_chan_list_arg {3369	u32 n_channels;3370	struct wmi_channel_arg *channels;3371};3372 3373enum wmi_bss_filter {3374	WMI_BSS_FILTER_NONE = 0,        /* no beacons forwarded */3375	WMI_BSS_FILTER_ALL,             /* all beacons forwarded */3376	WMI_BSS_FILTER_PROFILE,         /* only beacons matching profile */3377	WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */3378	WMI_BSS_FILTER_CURRENT_BSS,     /* only beacons matching current BSS */3379	WMI_BSS_FILTER_ALL_BUT_BSS,     /* all but beacons matching BSS */3380	WMI_BSS_FILTER_PROBED_SSID,     /* beacons matching probed ssid */3381	WMI_BSS_FILTER_LAST_BSS,        /* marker only */3382};3383 3384enum wmi_scan_event_type {3385	WMI_SCAN_EVENT_STARTED              = BIT(0),3386	WMI_SCAN_EVENT_COMPLETED            = BIT(1),3387	WMI_SCAN_EVENT_BSS_CHANNEL          = BIT(2),3388	WMI_SCAN_EVENT_FOREIGN_CHANNEL      = BIT(3),3389	WMI_SCAN_EVENT_DEQUEUED             = BIT(4),3390	/* possibly by high-prio scan */3391	WMI_SCAN_EVENT_PREEMPTED            = BIT(5),3392	WMI_SCAN_EVENT_START_FAILED         = BIT(6),3393	WMI_SCAN_EVENT_RESTARTED            = BIT(7),3394	WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),3395	WMI_SCAN_EVENT_MAX                  = BIT(15),3396};3397 3398enum wmi_scan_completion_reason {3399	WMI_SCAN_REASON_COMPLETED,3400	WMI_SCAN_REASON_CANCELLED,3401	WMI_SCAN_REASON_PREEMPTED,3402	WMI_SCAN_REASON_TIMEDOUT,3403	WMI_SCAN_REASON_INTERNAL_FAILURE,3404	WMI_SCAN_REASON_MAX,3405};3406 3407struct wmi_scan_event {3408	__le32 event_type; /* %WMI_SCAN_EVENT_ */3409	__le32 reason; /* %WMI_SCAN_REASON_ */3410	__le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */3411	__le32 scan_req_id;3412	__le32 scan_id;3413	__le32 vdev_id;3414} __packed;3415 3416/*3417 * This defines how much headroom is kept in the3418 * receive frame between the descriptor and the3419 * payload, in order for the WMI PHY error and3420 * management handler to insert header contents.3421 *3422 * This is in bytes.3423 */3424#define WMI_MGMT_RX_HDR_HEADROOM    523425 3426/*3427 * This event will be used for sending scan results3428 * as well as rx mgmt frames to the host. The rx buffer3429 * will be sent as part of this WMI event. It would be a3430 * good idea to pass all the fields in the RX status3431 * descriptor up to the host.3432 */3433struct wmi_mgmt_rx_hdr_v1 {3434	__le32 channel;3435	__le32 snr;3436	__le32 rate;3437	__le32 phy_mode;3438	__le32 buf_len;3439	__le32 status; /* %WMI_RX_STATUS_ */3440} __packed;3441 3442struct wmi_mgmt_rx_hdr_v2 {3443	struct wmi_mgmt_rx_hdr_v1 v1;3444	__le32 rssi_ctl[4];3445} __packed;3446 3447struct wmi_mgmt_rx_event_v1 {3448	struct wmi_mgmt_rx_hdr_v1 hdr;3449	u8 buf[];3450} __packed;3451 3452struct wmi_mgmt_rx_event_v2 {3453	struct wmi_mgmt_rx_hdr_v2 hdr;3454	u8 buf[];3455} __packed;3456 3457struct wmi_10_4_mgmt_rx_hdr {3458	__le32 channel;3459	__le32 snr;3460	    u8 rssi_ctl[4];3461	__le32 rate;3462	__le32 phy_mode;3463	__le32 buf_len;3464	__le32 status;3465} __packed;3466 3467struct wmi_10_4_mgmt_rx_event {3468	struct wmi_10_4_mgmt_rx_hdr hdr;3469	u8 buf[];3470} __packed;3471 3472struct wmi_mgmt_rx_ext_info {3473	__le64 rx_mac_timestamp;3474} __packed __aligned(4);3475 3476#define WMI_RX_STATUS_OK			0x003477#define WMI_RX_STATUS_ERR_CRC			0x013478#define WMI_RX_STATUS_ERR_DECRYPT		0x083479#define WMI_RX_STATUS_ERR_MIC			0x103480#define WMI_RX_STATUS_ERR_KEY_CACHE_MISS	0x203481/* Extension data at the end of mgmt frame */3482#define WMI_RX_STATUS_EXT_INFO		0x403483 3484#define PHY_ERROR_GEN_SPECTRAL_SCAN		0x263485#define PHY_ERROR_GEN_FALSE_RADAR_EXT		0x243486#define PHY_ERROR_GEN_RADAR			0x053487 3488#define PHY_ERROR_10_4_RADAR_MASK               0x43489#define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK       0x40000003490 3491enum phy_err_type {3492	PHY_ERROR_UNKNOWN,3493	PHY_ERROR_SPECTRAL_SCAN,3494	PHY_ERROR_FALSE_RADAR_EXT,3495	PHY_ERROR_RADAR3496};3497 3498struct wmi_phyerr {3499	__le32 tsf_timestamp;3500	__le16 freq1;3501	__le16 freq2;3502	u8 rssi_combined;3503	u8 chan_width_mhz;3504	u8 phy_err_code;3505	u8 rsvd0;3506	__le32 rssi_chains[4];3507	__le16 nf_chains[4];3508	__le32 buf_len;3509	u8 buf[];3510} __packed;3511 3512struct wmi_phyerr_event {3513	__le32 num_phyerrs;3514	__le32 tsf_l32;3515	__le32 tsf_u32;3516 3517	/* array of struct wmi_phyerr */3518	u8 phyerrs[];3519} __packed;3520 3521struct wmi_10_4_phyerr_event {3522	__le32 tsf_l32;3523	__le32 tsf_u32;3524	__le16 freq1;3525	__le16 freq2;3526	u8 rssi_combined;3527	u8 chan_width_mhz;3528	u8 phy_err_code;3529	u8 rsvd0;3530	__le32 rssi_chains[4];3531	__le16 nf_chains[4];3532	__le32 phy_err_mask[2];3533	__le32 tsf_timestamp;3534	__le32 buf_len;3535	u8 buf[];3536} __packed;3537 3538struct wmi_radar_found_info {3539	__le32 pri_min;3540	__le32 pri_max;3541	__le32 width_min;3542	__le32 width_max;3543	__le32 sidx_min;3544	__le32 sidx_max;3545} __packed;3546 3547enum wmi_radar_confirmation_status {3548	/* Detected radar was due to SW pulses */3549	WMI_SW_RADAR_DETECTED    = 0,3550 3551	WMI_RADAR_DETECTION_FAIL = 1,3552 3553	/* Real radar detected */3554	WMI_HW_RADAR_DETECTED    = 2,3555};3556 3557#define PHYERR_TLV_SIG				0xBB3558#define PHYERR_TLV_TAG_SEARCH_FFT_REPORT	0xFB3559#define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY	0xF83560#define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT	0xF93561 3562struct phyerr_radar_report {3563	__le32 reg0; /* RADAR_REPORT_REG0_* */3564	__le32 reg1; /* RADAR_REPORT_REG1_* */3565} __packed;3566 3567#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK		0x800000003568#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB		313569 3570#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK	0x400000003571#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB	303572 3573#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK		0x3FF000003574#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB		203575 3576#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK		0x000F00003577#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB		163578 3579#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK		0x0000FC003580#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB		103581 3582#define RADAR_REPORT_REG0_PULSE_SIDX_MASK		0x000003FF3583#define RADAR_REPORT_REG0_PULSE_SIDX_LSB		03584 3585#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK	0x800000003586#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB	313587 3588#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK	0x7F0000003589#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB		243590 3591#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK	0x00FF00003592#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB	163593 3594#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK		0x0000FF003595#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB		83596 3597#define RADAR_REPORT_REG1_PULSE_DUR_MASK		0x000000FF3598#define RADAR_REPORT_REG1_PULSE_DUR_LSB			03599 3600struct phyerr_fft_report {3601	__le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */3602	__le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */3603} __packed;3604 3605#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK	0xFF8000003606#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB	233607 3608#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK		0x007FC0003609#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB		143610 3611#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK		0x000030003612#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB		123613 3614#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK		0x00000FFF3615#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB		03616 3617#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK		0xFC0000003618#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB		263619 3620#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK		0x03FC00003621#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB		183622 3623#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK		0x0003FF003624#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB		83625 3626#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK	0x000000FF3627#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB	03628 3629struct phyerr_tlv {3630	__le16 len;3631	u8 tag;3632	u8 sig;3633} __packed;3634 3635#define DFS_RSSI_POSSIBLY_FALSE			503636#define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE	403637 3638struct wmi_mgmt_tx_hdr {3639	__le32 vdev_id;3640	struct wmi_mac_addr peer_macaddr;3641	__le32 tx_rate;3642	__le32 tx_power;3643	__le32 buf_len;3644} __packed;3645 3646struct wmi_mgmt_tx_cmd {3647	struct wmi_mgmt_tx_hdr hdr;3648	u8 buf[];3649} __packed;3650 3651struct wmi_echo_event {3652	__le32 value;3653} __packed;3654 3655struct wmi_echo_cmd {3656	__le32 value;3657} __packed;3658 3659struct wmi_pdev_set_regdomain_cmd {3660	__le32 reg_domain;3661	__le32 reg_domain_2G;3662	__le32 reg_domain_5G;3663	__le32 conformance_test_limit_2G;3664	__le32 conformance_test_limit_5G;3665} __packed;3666 3667enum wmi_dfs_region {3668	/* Uninitialized dfs domain */3669	WMI_UNINIT_DFS_DOMAIN = 0,3670 3671	/* FCC3 dfs domain */3672	WMI_FCC_DFS_DOMAIN = 1,3673 3674	/* ETSI dfs domain */3675	WMI_ETSI_DFS_DOMAIN = 2,3676 3677	/*Japan dfs domain */3678	WMI_MKK4_DFS_DOMAIN = 3,3679};3680 3681struct wmi_pdev_set_regdomain_cmd_10x {3682	__le32 reg_domain;3683	__le32 reg_domain_2G;3684	__le32 reg_domain_5G;3685	__le32 conformance_test_limit_2G;3686	__le32 conformance_test_limit_5G;3687 3688	/* dfs domain from wmi_dfs_region */3689	__le32 dfs_domain;3690} __packed;3691 3692/* Command to set/unset chip in quiet mode */3693struct wmi_pdev_set_quiet_cmd {3694	/* period in TUs */3695	__le32 period;3696 3697	/* duration in TUs */3698	__le32 duration;3699 3700	/* offset in TUs */3701	__le32 next_start;3702 3703	/* enable/disable */3704	__le32 enabled;3705} __packed;3706 3707/*3708 * 802.11g protection mode.3709 */3710enum ath10k_protmode {3711	ATH10K_PROT_NONE     = 0,    /* no protection */3712	ATH10K_PROT_CTSONLY  = 1,    /* CTS to self */3713	ATH10K_PROT_RTSCTS   = 2,    /* RTS-CTS */3714};3715 3716enum wmi_rtscts_profile {3717	WMI_RTSCTS_FOR_NO_RATESERIES = 0,3718	WMI_RTSCTS_FOR_SECOND_RATESERIES,3719	WMI_RTSCTS_ACROSS_SW_RETRIES3720};3721 3722#define WMI_RTSCTS_ENABLED		13723#define WMI_RTSCTS_SET_MASK		0x0f3724#define WMI_RTSCTS_SET_LSB		03725 3726#define WMI_RTSCTS_PROFILE_MASK		0xf03727#define WMI_RTSCTS_PROFILE_LSB		43728 3729enum wmi_beacon_gen_mode {3730	WMI_BEACON_STAGGERED_MODE = 0,3731	WMI_BEACON_BURST_MODE = 13732};3733 3734enum wmi_csa_event_ies_present_flag {3735	WMI_CSA_IE_PRESENT = 0x00000001,3736	WMI_XCSA_IE_PRESENT = 0x00000002,3737	WMI_WBW_IE_PRESENT = 0x00000004,3738	WMI_CSWARP_IE_PRESENT = 0x00000008,3739};3740 3741/* wmi CSA receive event from beacon frame */3742struct wmi_csa_event {3743	__le32 i_fc_dur;3744	/* Bit 0-15: FC */3745	/* Bit 16-31: DUR */3746	struct wmi_mac_addr i_addr1;3747	struct wmi_mac_addr i_addr2;3748	__le32 csa_ie[2];3749	__le32 xcsa_ie[2];3750	__le32 wb_ie[2];3751	__le32 cswarp_ie;3752	__le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */3753} __packed;3754 3755/* the definition of different PDEV parameters */3756#define PDEV_DEFAULT_STATS_UPDATE_PERIOD    5003757#define VDEV_DEFAULT_STATS_UPDATE_PERIOD    5003758#define PEER_DEFAULT_STATS_UPDATE_PERIOD    5003759 3760struct wmi_pdev_param_map {3761	u32 tx_chain_mask;3762	u32 rx_chain_mask;3763	u32 txpower_limit2g;3764	u32 txpower_limit5g;3765	u32 txpower_scale;3766	u32 beacon_gen_mode;3767	u32 beacon_tx_mode;3768	u32 resmgr_offchan_mode;3769	u32 protection_mode;3770	u32 dynamic_bw;3771	u32 non_agg_sw_retry_th;3772	u32 agg_sw_retry_th;3773	u32 sta_kickout_th;3774	u32 ac_aggrsize_scaling;3775	u32 ltr_enable;3776	u32 ltr_ac_latency_be;3777	u32 ltr_ac_latency_bk;3778	u32 ltr_ac_latency_vi;3779	u32 ltr_ac_latency_vo;3780	u32 ltr_ac_latency_timeout;3781	u32 ltr_sleep_override;3782	u32 ltr_rx_override;3783	u32 ltr_tx_activity_timeout;3784	u32 l1ss_enable;3785	u32 dsleep_enable;3786	u32 pcielp_txbuf_flush;3787	u32 pcielp_txbuf_watermark;3788	u32 pcielp_txbuf_tmo_en;3789	u32 pcielp_txbuf_tmo_value;3790	u32 pdev_stats_update_period;3791	u32 vdev_stats_update_period;3792	u32 peer_stats_update_period;3793	u32 bcnflt_stats_update_period;3794	u32 pmf_qos;3795	u32 arp_ac_override;3796	u32 dcs;3797	u32 ani_enable;3798	u32 ani_poll_period;3799	u32 ani_listen_period;3800	u32 ani_ofdm_level;3801	u32 ani_cck_level;3802	u32 dyntxchain;3803	u32 proxy_sta;3804	u32 idle_ps_config;3805	u32 power_gating_sleep;3806	u32 fast_channel_reset;3807	u32 burst_dur;3808	u32 burst_enable;3809	u32 cal_period;3810	u32 aggr_burst;3811	u32 rx_decap_mode;3812	u32 smart_antenna_default_antenna;3813	u32 igmpmld_override;3814	u32 igmpmld_tid;3815	u32 antenna_gain;3816	u32 rx_filter;3817	u32 set_mcast_to_ucast_tid;3818	u32 proxy_sta_mode;3819	u32 set_mcast2ucast_mode;3820	u32 set_mcast2ucast_buffer;3821	u32 remove_mcast2ucast_buffer;3822	u32 peer_sta_ps_statechg_enable;3823	u32 igmpmld_ac_override;3824	u32 block_interbss;3825	u32 set_disable_reset_cmdid;3826	u32 set_msdu_ttl_cmdid;3827	u32 set_ppdu_duration_cmdid;3828	u32 txbf_sound_period_cmdid;3829	u32 set_promisc_mode_cmdid;3830	u32 set_burst_mode_cmdid;3831	u32 en_stats;3832	u32 mu_group_policy;3833	u32 noise_detection;3834	u32 noise_threshold;3835	u32 dpd_enable;3836	u32 set_mcast_bcast_echo;3837	u32 atf_strict_sch;3838	u32 atf_sched_duration;3839	u32 ant_plzn;3840	u32 mgmt_retry_limit;3841	u32 sensitivity_level;3842	u32 signed_txpower_2g;3843	u32 signed_txpower_5g;3844	u32 enable_per_tid_amsdu;3845	u32 enable_per_tid_ampdu;3846	u32 cca_threshold;3847	u32 rts_fixed_rate;3848	u32 pdev_reset;3849	u32 wapi_mbssid_offset;3850	u32 arp_srcaddr;3851	u32 arp_dstaddr;3852	u32 enable_btcoex;3853	u32 rfkill_config;3854	u32 rfkill_enable;3855	u32 peer_stats_info_enable;3856};3857 3858#define WMI_PDEV_PARAM_UNSUPPORTED 03859 3860enum wmi_pdev_param {3861	/* TX chain mask */3862	WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,3863	/* RX chain mask */3864	WMI_PDEV_PARAM_RX_CHAIN_MASK,3865	/* TX power limit for 2G Radio */3866	WMI_PDEV_PARAM_TXPOWER_LIMIT2G,3867	/* TX power limit for 5G Radio */3868	WMI_PDEV_PARAM_TXPOWER_LIMIT5G,3869	/* TX power scale */3870	WMI_PDEV_PARAM_TXPOWER_SCALE,3871	/* Beacon generation mode . 0: host, 1: target   */3872	WMI_PDEV_PARAM_BEACON_GEN_MODE,3873	/* Beacon generation mode . 0: staggered 1: bursted   */3874	WMI_PDEV_PARAM_BEACON_TX_MODE,3875	/*3876	 * Resource manager off chan mode .3877	 * 0: turn off offchan mode. 1: turn on offchan mode3878	 */3879	WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,3880	/*3881	 * Protection mode:3882	 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS3883	 */3884	WMI_PDEV_PARAM_PROTECTION_MODE,3885	/*3886	 * Dynamic bandwidth - 0: disable, 1: enable3887	 *3888	 * When enabled HW rate control tries different bandwidths when3889	 * retransmitting frames.3890	 */3891	WMI_PDEV_PARAM_DYNAMIC_BW,3892	/* Non aggregate/ 11g sw retry threshold.0-disable */3893	WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,3894	/* aggregate sw retry threshold. 0-disable*/3895	WMI_PDEV_PARAM_AGG_SW_RETRY_TH,3896	/* Station kickout threshold (non of consecutive failures).0-disable */3897	WMI_PDEV_PARAM_STA_KICKOUT_TH,3898	/* Aggerate size scaling configuration per AC */3899	WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,3900	/* LTR enable */3901	WMI_PDEV_PARAM_LTR_ENABLE,3902	/* LTR latency for BE, in us */3903	WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,3904	/* LTR latency for BK, in us */3905	WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,3906	/* LTR latency for VI, in us */3907	WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,3908	/* LTR latency for VO, in us  */3909	WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,3910	/* LTR AC latency timeout, in ms */3911	WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,3912	/* LTR platform latency override, in us */3913	WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,3914	/* LTR-RX override, in us */3915	WMI_PDEV_PARAM_LTR_RX_OVERRIDE,3916	/* Tx activity timeout for LTR, in us */3917	WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,3918	/* L1SS state machine enable */3919	WMI_PDEV_PARAM_L1SS_ENABLE,3920	/* Deep sleep state machine enable */3921	WMI_PDEV_PARAM_DSLEEP_ENABLE,3922	/* RX buffering flush enable */3923	WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,3924	/* RX buffering matermark */3925	WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,3926	/* RX buffering timeout enable */3927	WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,3928	/* RX buffering timeout value */3929	WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,3930	/* pdev level stats update period in ms */3931	WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,3932	/* vdev level stats update period in ms */3933	WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,3934	/* peer level stats update period in ms */3935	WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,3936	/* beacon filter status update period */3937	WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,3938	/* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */3939	WMI_PDEV_PARAM_PMF_QOS,3940	/* Access category on which ARP frames are sent */3941	WMI_PDEV_PARAM_ARP_AC_OVERRIDE,3942	/* DCS configuration */3943	WMI_PDEV_PARAM_DCS,3944	/* Enable/Disable ANI on target */3945	WMI_PDEV_PARAM_ANI_ENABLE,3946	/* configure the ANI polling period */3947	WMI_PDEV_PARAM_ANI_POLL_PERIOD,3948	/* configure the ANI listening period */3949	WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,3950	/* configure OFDM immunity level */3951	WMI_PDEV_PARAM_ANI_OFDM_LEVEL,3952	/* configure CCK immunity level */3953	WMI_PDEV_PARAM_ANI_CCK_LEVEL,3954	/* Enable/Disable CDD for 1x1 STAs in rate control module */3955	WMI_PDEV_PARAM_DYNTXCHAIN,3956	/* Enable/Disable proxy STA */3957	WMI_PDEV_PARAM_PROXY_STA,3958	/* Enable/Disable low power state when all VDEVs are inactive/idle. */3959	WMI_PDEV_PARAM_IDLE_PS_CONFIG,3960	/* Enable/Disable power gating sleep */3961	WMI_PDEV_PARAM_POWER_GATING_SLEEP,3962};3963 3964enum wmi_10x_pdev_param {3965	/* TX chian mask */3966	WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,3967	/* RX chian mask */3968	WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,3969	/* TX power limit for 2G Radio */3970	WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,3971	/* TX power limit for 5G Radio */3972	WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,3973	/* TX power scale */3974	WMI_10X_PDEV_PARAM_TXPOWER_SCALE,3975	/* Beacon generation mode . 0: host, 1: target   */3976	WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,3977	/* Beacon generation mode . 0: staggered 1: bursted   */3978	WMI_10X_PDEV_PARAM_BEACON_TX_MODE,3979	/*3980	 * Resource manager off chan mode .3981	 * 0: turn off offchan mode. 1: turn on offchan mode3982	 */3983	WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,3984	/*3985	 * Protection mode:3986	 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS3987	 */3988	WMI_10X_PDEV_PARAM_PROTECTION_MODE,3989	/* Dynamic bandwidth 0: disable 1: enable */3990	WMI_10X_PDEV_PARAM_DYNAMIC_BW,3991	/* Non aggregate/ 11g sw retry threshold.0-disable */3992	WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,3993	/* aggregate sw retry threshold. 0-disable*/3994	WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,3995	/* Station kickout threshold (non of consecutive failures).0-disable */3996	WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,3997	/* Aggerate size scaling configuration per AC */3998	WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,3999	/* LTR enable */4000	WMI_10X_PDEV_PARAM_LTR_ENABLE,4001	/* LTR latency for BE, in us */4002	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,4003	/* LTR latency for BK, in us */4004	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,4005	/* LTR latency for VI, in us */4006	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,4007	/* LTR latency for VO, in us  */4008	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,4009	/* LTR AC latency timeout, in ms */4010	WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,4011	/* LTR platform latency override, in us */4012	WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,4013	/* LTR-RX override, in us */4014	WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,4015	/* Tx activity timeout for LTR, in us */4016	WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,4017	/* L1SS state machine enable */4018	WMI_10X_PDEV_PARAM_L1SS_ENABLE,4019	/* Deep sleep state machine enable */4020	WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,4021	/* pdev level stats update period in ms */4022	WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,4023	/* vdev level stats update period in ms */4024	WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,4025	/* peer level stats update period in ms */4026	WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,4027	/* beacon filter status update period */4028	WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,4029	/* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */4030	WMI_10X_PDEV_PARAM_PMF_QOS,4031	/* Access category on which ARP and DHCP frames are sent */4032	WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,4033	/* DCS configuration */4034	WMI_10X_PDEV_PARAM_DCS,4035	/* Enable/Disable ANI on target */4036	WMI_10X_PDEV_PARAM_ANI_ENABLE,4037	/* configure the ANI polling period */4038	WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,4039	/* configure the ANI listening period */4040	WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,4041	/* configure OFDM immunity level */4042	WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,4043	/* configure CCK immunity level */4044	WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,4045	/* Enable/Disable CDD for 1x1 STAs in rate control module */4046	WMI_10X_PDEV_PARAM_DYNTXCHAIN,4047	/* Enable/Disable Fast channel reset*/4048	WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,4049	/* Set Bursting DUR */4050	WMI_10X_PDEV_PARAM_BURST_DUR,4051	/* Set Bursting Enable*/4052	WMI_10X_PDEV_PARAM_BURST_ENABLE,4053 4054	/* following are available as of firmware 10.2 */4055	WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,4056	WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,4057	WMI_10X_PDEV_PARAM_IGMPMLD_TID,4058	WMI_10X_PDEV_PARAM_ANTENNA_GAIN,4059	WMI_10X_PDEV_PARAM_RX_DECAP_MODE,4060	WMI_10X_PDEV_PARAM_RX_FILTER,4061	WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,4062	WMI_10X_PDEV_PARAM_PROXY_STA_MODE,4063	WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,4064	WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,4065	WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,4066	WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,4067	WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,4068	WMI_10X_PDEV_PARAM_CAL_PERIOD,4069	WMI_10X_PDEV_PARAM_ATF_STRICT_SCH,4070	WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION,4071	WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID,4072	WMI_10X_PDEV_PARAM_PDEV_RESET4073};4074 4075enum wmi_10_4_pdev_param {4076	WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,4077	WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,4078	WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,4079	WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,4080	WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,4081	WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,4082	WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,4083	WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,4084	WMI_10_4_PDEV_PARAM_PROTECTION_MODE,4085	WMI_10_4_PDEV_PARAM_DYNAMIC_BW,4086	WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,4087	WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,4088	WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,4089	WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,4090	WMI_10_4_PDEV_PARAM_LTR_ENABLE,4091	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,4092	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,4093	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,4094	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,4095	WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,4096	WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,4097	WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,4098	WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,4099	WMI_10_4_PDEV_PARAM_L1SS_ENABLE,4100	WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,4101	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,4102	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,4103	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,4104	WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,4105	WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,4106	WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,4107	WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,4108	WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,4109	WMI_10_4_PDEV_PARAM_PMF_QOS,4110	WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,4111	WMI_10_4_PDEV_PARAM_DCS,4112	WMI_10_4_PDEV_PARAM_ANI_ENABLE,4113	WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,4114	WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,4115	WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,4116	WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,4117	WMI_10_4_PDEV_PARAM_DYNTXCHAIN,4118	WMI_10_4_PDEV_PARAM_PROXY_STA,4119	WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,4120	WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,4121	WMI_10_4_PDEV_PARAM_AGGR_BURST,4122	WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,4123	WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,4124	WMI_10_4_PDEV_PARAM_BURST_DUR,4125	WMI_10_4_PDEV_PARAM_BURST_ENABLE,4126	WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,4127	WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,4128	WMI_10_4_PDEV_PARAM_IGMPMLD_TID,4129	WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,4130	WMI_10_4_PDEV_PARAM_RX_FILTER,4131	WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,4132	WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,4133	WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,4134	WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,4135	WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,4136	WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,4137	WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,4138	WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,4139	WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,4140	WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,4141	WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,4142	WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,4143	WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,4144	WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,4145	WMI_10_4_PDEV_PARAM_EN_STATS,4146	WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,4147	WMI_10_4_PDEV_PARAM_NOISE_DETECTION,4148	WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,4149	WMI_10_4_PDEV_PARAM_DPD_ENABLE,4150	WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,4151	WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,4152	WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,4153	WMI_10_4_PDEV_PARAM_ANT_PLZN,4154	WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,4155	WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,4156	WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,4157	WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,4158	WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,4159	WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,4160	WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,4161	WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,4162	WMI_10_4_PDEV_PARAM_CAL_PERIOD,4163	WMI_10_4_PDEV_PARAM_PDEV_RESET,4164	WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,4165	WMI_10_4_PDEV_PARAM_ARP_SRCADDR,4166	WMI_10_4_PDEV_PARAM_ARP_DSTADDR,4167	WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,4168	WMI_10_4_PDEV_PARAM_RX_BATCHMODE,4169	WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,4170	WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,4171	WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,4172	WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,4173	WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,4174	WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,4175	WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,4176};4177 4178struct wmi_pdev_set_param_cmd {4179	__le32 param_id;4180	__le32 param_value;4181} __packed;4182 4183struct wmi_pdev_set_base_macaddr_cmd {4184	struct wmi_mac_addr mac_addr;4185} __packed;4186 4187/* valid period is 1 ~ 60000ms, unit in millisecond */4188#define WMI_PDEV_PARAM_CAL_PERIOD_MAX 600004189 4190struct wmi_pdev_get_tpc_config_cmd {4191	/* parameter   */4192	__le32 param;4193} __packed;4194 4195#define WMI_TPC_CONFIG_PARAM		14196#define WMI_TPC_FINAL_RATE_MAX		2404197#define WMI_TPC_TX_N_CHAIN		44198#define WMI_TPC_RATE_MAX               (WMI_TPC_TX_N_CHAIN * 65)4199#define WMI_TPC_PREAM_TABLE_MAX		104200#define WMI_TPC_FLAG			34201#define WMI_TPC_BUF_SIZE		104202#define WMI_TPC_BEAMFORMING		24203 4204enum wmi_tpc_table_type {4205	WMI_TPC_TABLE_TYPE_CDD = 0,4206	WMI_TPC_TABLE_TYPE_STBC = 1,4207	WMI_TPC_TABLE_TYPE_TXBF = 2,4208};4209 4210enum wmi_tpc_config_event_flag {4211	WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD	= 0x1,4212	WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC	= 0x2,4213	WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF	= 0x4,4214};4215 4216struct wmi_pdev_tpc_config_event {4217	__le32 reg_domain;4218	__le32 chan_freq;4219	__le32 phy_mode;4220	__le32 twice_antenna_reduction;4221	__le32 twice_max_rd_power;4222	a_sle32 twice_antenna_gain;4223	__le32 power_limit;4224	__le32 rate_max;4225	__le32 num_tx_chain;4226	__le32 ctl;4227	__le32 flags;4228	s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];4229	s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];4230	s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];4231	s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];4232	u8 rates_array[WMI_TPC_RATE_MAX];4233} __packed;4234 4235/* Transmit power scale factor. */4236enum wmi_tp_scale {4237	WMI_TP_SCALE_MAX    = 0,	/* no scaling (default) */4238	WMI_TP_SCALE_50     = 1,	/* 50% of max (-3 dBm) */4239	WMI_TP_SCALE_25     = 2,	/* 25% of max (-6 dBm) */4240	WMI_TP_SCALE_12     = 3,	/* 12% of max (-9 dBm) */4241	WMI_TP_SCALE_MIN    = 4,	/* min, but still on   */4242	WMI_TP_SCALE_SIZE   = 5,	/* max num of enum     */4243};4244 4245struct wmi_pdev_tpc_final_table_event {4246	__le32 reg_domain;4247	__le32 chan_freq;4248	__le32 phy_mode;4249	__le32 twice_antenna_reduction;4250	__le32 twice_max_rd_power;4251	a_sle32 twice_antenna_gain;4252	__le32 power_limit;4253	__le32 rate_max;4254	__le32 num_tx_chain;4255	__le32 ctl;4256	__le32 flags;4257	s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];4258	s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];4259	s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];4260	s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];4261	u8 rates_array[WMI_TPC_FINAL_RATE_MAX];4262	u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN]4263	   [WMI_TPC_TX_N_CHAIN];4264} __packed;4265 4266struct wmi_pdev_get_tpc_table_cmd {4267	__le32 param;4268} __packed;4269 4270enum wmi_tpc_pream_2ghz {4271	WMI_TPC_PREAM_2GHZ_CCK = 0,4272	WMI_TPC_PREAM_2GHZ_OFDM,4273	WMI_TPC_PREAM_2GHZ_HT20,4274	WMI_TPC_PREAM_2GHZ_HT40,4275	WMI_TPC_PREAM_2GHZ_VHT20,4276	WMI_TPC_PREAM_2GHZ_VHT40,4277	WMI_TPC_PREAM_2GHZ_VHT80,4278};4279 4280enum wmi_tpc_pream_5ghz {4281	WMI_TPC_PREAM_5GHZ_OFDM = 1,4282	WMI_TPC_PREAM_5GHZ_HT20,4283	WMI_TPC_PREAM_5GHZ_HT40,4284	WMI_TPC_PREAM_5GHZ_VHT20,4285	WMI_TPC_PREAM_5GHZ_VHT40,4286	WMI_TPC_PREAM_5GHZ_VHT80,4287	WMI_TPC_PREAM_5GHZ_HTCUP,4288};4289 4290#define	WMI_PEER_PS_STATE_DISABLED	24291 4292struct wmi_peer_sta_ps_state_chg_event {4293	struct wmi_mac_addr peer_macaddr;4294	__le32 peer_ps_state;4295} __packed;4296 4297#define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)4298 4299struct wmi_debug_mesg_event {4300	/* message buffer, NULL terminated */4301	char bufp[WMI_MAX_DEBUG_MESG];4302} __packed;4303 4304enum {4305	/* P2P device */4306	VDEV_SUBTYPE_P2PDEV = 0,4307	/* P2P client */4308	VDEV_SUBTYPE_P2PCLI,4309	/* P2P GO */4310	VDEV_SUBTYPE_P2PGO,4311	/* BT3.0 HS */4312	VDEV_SUBTYPE_BT,4313};4314 4315struct wmi_pdev_set_channel_cmd {4316	/* idnore power , only use flags , mode and freq */4317	struct wmi_channel chan;4318} __packed;4319 4320struct wmi_pdev_pktlog_enable_cmd {4321	__le32 ev_bitmap;4322} __packed;4323 4324/* Customize the DSCP (bit) to TID (0-7) mapping for QOS */4325#define WMI_DSCP_MAP_MAX    (64)4326struct wmi_pdev_set_dscp_tid_map_cmd {4327	/* map indicating DSCP to TID conversion */4328	__le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];4329} __packed;4330 4331enum mcast_bcast_rate_id {4332	WMI_SET_MCAST_RATE,4333	WMI_SET_BCAST_RATE4334};4335 4336struct mcast_bcast_rate {4337	enum mcast_bcast_rate_id rate_id;4338	__le32 rate;4339} __packed;4340 4341struct wmi_wmm_params {4342	__le32 cwmin;4343	__le32 cwmax;4344	__le32 aifs;4345	__le32 txop;4346	__le32 acm;4347	__le32 no_ack;4348} __packed;4349 4350struct wmi_pdev_set_wmm_params {4351	struct wmi_wmm_params ac_be;4352	struct wmi_wmm_params ac_bk;4353	struct wmi_wmm_params ac_vi;4354	struct wmi_wmm_params ac_vo;4355} __packed;4356 4357struct wmi_wmm_params_arg {4358	u32 cwmin;4359	u32 cwmax;4360	u32 aifs;4361	u32 txop;4362	u32 acm;4363	u32 no_ack;4364};4365 4366struct wmi_wmm_params_all_arg {4367	struct wmi_wmm_params_arg ac_be;4368	struct wmi_wmm_params_arg ac_bk;4369	struct wmi_wmm_params_arg ac_vi;4370	struct wmi_wmm_params_arg ac_vo;4371};4372 4373struct wmi_pdev_stats_tx {4374	/* Num HTT cookies queued to dispatch list */4375	__le32 comp_queued;4376 4377	/* Num HTT cookies dispatched */4378	__le32 comp_delivered;4379 4380	/* Num MSDU queued to WAL */4381	__le32 msdu_enqued;4382 4383	/* Num MPDU queue to WAL */4384	__le32 mpdu_enqued;4385 4386	/* Num MSDUs dropped by WMM limit */4387	__le32 wmm_drop;4388 4389	/* Num Local frames queued */4390	__le32 local_enqued;4391 4392	/* Num Local frames done */4393	__le32 local_freed;4394 4395	/* Num queued to HW */4396	__le32 hw_queued;4397 4398	/* Num PPDU reaped from HW */4399	__le32 hw_reaped;4400 4401	/* Num underruns */4402	__le32 underrun;4403 4404	/* Num PPDUs cleaned up in TX abort */4405	__le32 tx_abort;4406 4407	/* Num MPDUs requeued by SW */4408	__le32 mpdus_requeued;4409 4410	/* excessive retries */4411	__le32 tx_ko;4412 4413	/* data hw rate code */4414	__le32 data_rc;4415 4416	/* Scheduler self triggers */4417	__le32 self_triggers;4418 4419	/* frames dropped due to excessive sw retries */4420	__le32 sw_retry_failure;4421 4422	/* illegal rate phy errors  */4423	__le32 illgl_rate_phy_err;4424 4425	/* wal pdev continuous xretry */4426	__le32 pdev_cont_xretry;4427 4428	/* wal pdev continuous xretry */4429	__le32 pdev_tx_timeout;4430 4431	/* wal pdev resets  */4432	__le32 pdev_resets;4433 4434	/* frames dropped due to non-availability of stateless TIDs */4435	__le32 stateless_tid_alloc_failure;4436 4437	__le32 phy_underrun;4438 4439	/* MPDU is more than txop limit */4440	__le32 txop_ovf;4441} __packed;4442 4443struct wmi_10_4_pdev_stats_tx {4444	/* Num HTT cookies queued to dispatch list */4445	__le32 comp_queued;4446 4447	/* Num HTT cookies dispatched */4448	__le32 comp_delivered;4449 4450	/* Num MSDU queued to WAL */4451	__le32 msdu_enqued;4452 4453	/* Num MPDU queue to WAL */4454	__le32 mpdu_enqued;4455 4456	/* Num MSDUs dropped by WMM limit */4457	__le32 wmm_drop;4458 4459	/* Num Local frames queued */4460	__le32 local_enqued;4461 4462	/* Num Local frames done */4463	__le32 local_freed;4464 4465	/* Num queued to HW */4466	__le32 hw_queued;4467 4468	/* Num PPDU reaped from HW */4469	__le32 hw_reaped;4470 4471	/* Num underruns */4472	__le32 underrun;4473 4474	/* HW Paused. */4475	__le32  hw_paused;4476 4477	/* Num PPDUs cleaned up in TX abort */4478	__le32 tx_abort;4479 4480	/* Num MPDUs requeued by SW */4481	__le32 mpdus_requeued;4482 4483	/* excessive retries */4484	__le32 tx_ko;4485 4486	/* data hw rate code */4487	__le32 data_rc;4488 4489	/* Scheduler self triggers */4490	__le32 self_triggers;4491 4492	/* frames dropped due to excessive sw retries */4493	__le32 sw_retry_failure;4494 4495	/* illegal rate phy errors  */4496	__le32 illgl_rate_phy_err;4497 4498	/* wal pdev continuous xretry */4499	__le32 pdev_cont_xretry;4500 4501	/* wal pdev tx timeouts */4502	__le32 pdev_tx_timeout;4503 4504	/* wal pdev resets  */4505	__le32 pdev_resets;4506 4507	/* frames dropped due to non-availability of stateless TIDs */4508	__le32 stateless_tid_alloc_failure;4509 4510	__le32 phy_underrun;4511 4512	/* MPDU is more than txop limit */4513	__le32 txop_ovf;4514 4515	/* Number of Sequences posted */4516	__le32 seq_posted;4517 4518	/* Number of Sequences failed queueing */4519	__le32 seq_failed_queueing;4520 4521	/* Number of Sequences completed */4522	__le32 seq_completed;4523 4524	/* Number of Sequences restarted */4525	__le32 seq_restarted;4526 4527	/* Number of MU Sequences posted */4528	__le32 mu_seq_posted;4529 4530	/* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */4531	__le32 mpdus_sw_flush;4532 4533	/* Num MPDUs filtered by HW, all filter condition (TTL expired) */4534	__le32 mpdus_hw_filter;4535 4536	/* Num MPDUs truncated by PDG4537	 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)4538	 */4539	__le32 mpdus_truncated;4540 4541	/* Num MPDUs that was tried but didn't receive ACK or BA */4542	__le32 mpdus_ack_failed;4543 4544	/* Num MPDUs that was dropped due to expiry. */4545	__le32 mpdus_expired;4546} __packed;4547 4548struct wmi_pdev_stats_rx {4549	/* Cnts any change in ring routing mid-ppdu */4550	__le32 mid_ppdu_route_change;4551 4552	/* Total number of statuses processed */4553	__le32 status_rcvd;4554 4555	/* Extra frags on rings 0-3 */4556	__le32 r0_frags;4557	__le32 r1_frags;4558	__le32 r2_frags;4559	__le32 r3_frags;4560 4561	/* MSDUs / MPDUs delivered to HTT */4562	__le32 htt_msdus;4563	__le32 htt_mpdus;4564 4565	/* MSDUs / MPDUs delivered to local stack */4566	__le32 loc_msdus;4567	__le32 loc_mpdus;4568 4569	/* AMSDUs that have more MSDUs than the status ring size */4570	__le32 oversize_amsdu;4571 4572	/* Number of PHY errors */4573	__le32 phy_errs;4574 4575	/* Number of PHY errors drops */4576	__le32 phy_err_drop;4577 4578	/* Number of mpdu errors - FCS, MIC, ENC etc. */4579	__le32 mpdu_errs;4580} __packed;4581 4582struct wmi_pdev_stats_peer {4583	/* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */4584	__le32 dummy;4585} __packed;4586 4587enum wmi_stats_id {4588	WMI_STAT_PEER = BIT(0),4589	WMI_STAT_AP = BIT(1),4590	WMI_STAT_PDEV = BIT(2),4591	WMI_STAT_VDEV = BIT(3),4592	WMI_STAT_BCNFLT = BIT(4),4593	WMI_STAT_VDEV_RATE = BIT(5),4594};4595 4596enum wmi_10_4_stats_id {4597	WMI_10_4_STAT_PEER		= BIT(0),4598	WMI_10_4_STAT_AP		= BIT(1),4599	WMI_10_4_STAT_INST		= BIT(2),4600	WMI_10_4_STAT_PEER_EXTD		= BIT(3),4601	WMI_10_4_STAT_VDEV_EXTD		= BIT(4),4602};4603 4604enum wmi_tlv_stats_id {4605	WMI_TLV_STAT_PEER	= BIT(0),4606	WMI_TLV_STAT_AP		= BIT(1),4607	WMI_TLV_STAT_PDEV	= BIT(2),4608	WMI_TLV_STAT_VDEV	= BIT(3),4609	WMI_TLV_STAT_PEER_EXTD  = BIT(10),4610};4611 4612struct wlan_inst_rssi_args {4613	__le16 cfg_retry_count;4614	__le16 retry_count;4615};4616 4617struct wmi_request_stats_cmd {4618	__le32 stats_id;4619 4620	__le32 vdev_id;4621 4622	/* peer MAC address */4623	struct wmi_mac_addr peer_macaddr;4624 4625	/* Instantaneous RSSI arguments */4626	struct wlan_inst_rssi_args inst_rssi_args;4627} __packed;4628 4629enum wmi_peer_stats_info_request_type {4630	/* request stats of one specified peer */4631	WMI_REQUEST_ONE_PEER_STATS_INFO = 0x01,4632	/* request stats of all peers belong to specified VDEV */4633	WMI_REQUEST_VDEV_ALL_PEER_STATS_INFO = 0x02,4634};4635 4636/* Suspend option */4637enum {4638	/* suspend */4639	WMI_PDEV_SUSPEND,4640 4641	/* suspend and disable all interrupts */4642	WMI_PDEV_SUSPEND_AND_DISABLE_INTR,4643};4644 4645struct wmi_pdev_suspend_cmd {4646	/* suspend option sent to target */4647	__le32 suspend_opt;4648} __packed;4649 4650struct wmi_stats_event {4651	__le32 stats_id; /* WMI_STAT_ */4652	/*4653	 * number of pdev stats event structures4654	 * (wmi_pdev_stats) 0 or 14655	 */4656	__le32 num_pdev_stats;4657	/*4658	 * number of vdev stats event structures4659	 * (wmi_vdev_stats) 0 or max vdevs4660	 */4661	__le32 num_vdev_stats;4662	/*4663	 * number of peer stats event structures4664	 * (wmi_peer_stats) 0 or max peers4665	 */4666	__le32 num_peer_stats;4667	__le32 num_bcnflt_stats;4668	/*4669	 * followed by4670	 *   num_pdev_stats * size of(struct wmi_pdev_stats)4671	 *   num_vdev_stats * size of(struct wmi_vdev_stats)4672	 *   num_peer_stats * size of(struct wmi_peer_stats)4673	 *4674	 *  By having a zero sized array, the pointer to data area4675	 *  becomes available without increasing the struct size4676	 */4677	u8 data[];4678} __packed;4679 4680struct wmi_10_2_stats_event {4681	__le32 stats_id; /* %WMI_REQUEST_ */4682	__le32 num_pdev_stats;4683	__le32 num_pdev_ext_stats;4684	__le32 num_vdev_stats;4685	__le32 num_peer_stats;4686	__le32 num_bcnflt_stats;4687	u8 data[];4688} __packed;4689 4690/*4691 * PDEV statistics4692 * TODO: add all PDEV stats here4693 */4694struct wmi_pdev_stats_base {4695	__le32 chan_nf;4696	__le32 tx_frame_count; /* Cycles spent transmitting frames */4697	__le32 rx_frame_count; /* Cycles spent receiving frames */4698	__le32 rx_clear_count; /* Total channel busy time, evidently */4699	__le32 cycle_count; /* Total on-channel time */4700	__le32 phy_err_count;4701	__le32 chan_tx_pwr;4702} __packed;4703 4704struct wmi_pdev_stats {4705	struct wmi_pdev_stats_base base;4706	struct wmi_pdev_stats_tx tx;4707	struct wmi_pdev_stats_rx rx;4708	struct wmi_pdev_stats_peer peer;4709} __packed;4710 4711struct wmi_pdev_stats_extra {4712	__le32 ack_rx_bad;4713	__le32 rts_bad;4714	__le32 rts_good;4715	__le32 fcs_bad;4716	__le32 no_beacons;4717	__le32 mib_int_count;4718} __packed;4719 4720struct wmi_10x_pdev_stats {4721	struct wmi_pdev_stats_base base;4722	struct wmi_pdev_stats_tx tx;4723	struct wmi_pdev_stats_rx rx;4724	struct wmi_pdev_stats_peer peer;4725	struct wmi_pdev_stats_extra extra;4726} __packed;4727 4728struct wmi_pdev_stats_mem {4729	__le32 dram_free;4730	__le32 iram_free;4731} __packed;4732 4733struct wmi_10_2_pdev_stats {4734	struct wmi_pdev_stats_base base;4735	struct wmi_pdev_stats_tx tx;4736	__le32 mc_drop;4737	struct wmi_pdev_stats_rx rx;4738	__le32 pdev_rx_timeout;4739	struct wmi_pdev_stats_mem mem;4740	struct wmi_pdev_stats_peer peer;4741	struct wmi_pdev_stats_extra extra;4742} __packed;4743 4744struct wmi_10_4_pdev_stats {4745	struct wmi_pdev_stats_base base;4746	struct wmi_10_4_pdev_stats_tx tx;4747	struct wmi_pdev_stats_rx rx;4748	__le32 rx_ovfl_errs;4749	struct wmi_pdev_stats_mem mem;4750	__le32 sram_free_size;4751	struct wmi_pdev_stats_extra extra;4752} __packed;4753 4754/*4755 * VDEV statistics4756 */4757 4758#define WMI_VDEV_STATS_FTM_COUNT_VALID	BIT(31)4759#define WMI_VDEV_STATS_FTM_COUNT_LSB	04760#define WMI_VDEV_STATS_FTM_COUNT_MASK	0x7fffffff4761 4762struct wmi_vdev_stats {4763	__le32 vdev_id;4764} __packed;4765 4766struct wmi_vdev_stats_extd {4767	__le32 vdev_id;4768	__le32 ppdu_aggr_cnt;4769	__le32 ppdu_noack;4770	__le32 mpdu_queued;4771	__le32 ppdu_nonaggr_cnt;4772	__le32 mpdu_sw_requeued;4773	__le32 mpdu_suc_retry;4774	__le32 mpdu_suc_multitry;4775	__le32 mpdu_fail_retry;4776	__le32 tx_ftm_suc;4777	__le32 tx_ftm_suc_retry;4778	__le32 tx_ftm_fail;4779	__le32 rx_ftmr_cnt;4780	__le32 rx_ftmr_dup_cnt;4781	__le32 rx_iftmr_cnt;4782	__le32 rx_iftmr_dup_cnt;4783	__le32 reserved[6];4784} __packed;4785 4786/*4787 * peer statistics.4788 * TODO: add more stats4789 */4790struct wmi_peer_stats {4791	struct wmi_mac_addr peer_macaddr;4792	__le32 peer_rssi;4793	__le32 peer_tx_rate;4794} __packed;4795 4796struct wmi_10x_peer_stats {4797	struct wmi_peer_stats old;4798	__le32 peer_rx_rate;4799} __packed;4800 4801struct wmi_10_2_peer_stats {4802	struct wmi_peer_stats old;4803	__le32 peer_rx_rate;4804	__le32 current_per;4805	__le32 retries;4806	__le32 tx_rate_count;4807	__le32 max_4ms_frame_len;4808	__le32 total_sub_frames;4809	__le32 tx_bytes;4810	__le32 num_pkt_loss_overflow[4];4811	__le32 num_pkt_loss_excess_retry[4];4812} __packed;4813 4814struct wmi_10_2_4_peer_stats {4815	struct wmi_10_2_peer_stats common;4816	__le32 peer_rssi_changed;4817} __packed;4818 4819struct wmi_10_2_4_ext_peer_stats {4820	struct wmi_10_2_peer_stats common;4821	__le32 peer_rssi_changed;4822	__le32 rx_duration;4823} __packed;4824 4825struct wmi_10_4_peer_stats {4826	struct wmi_mac_addr peer_macaddr;4827	__le32 peer_rssi;4828	__le32 peer_rssi_seq_num;4829	__le32 peer_tx_rate;4830	__le32 peer_rx_rate;4831	__le32 current_per;4832	__le32 retries;4833	__le32 tx_rate_count;4834	__le32 max_4ms_frame_len;4835	__le32 total_sub_frames;4836	__le32 tx_bytes;4837	__le32 num_pkt_loss_overflow[4];4838	__le32 num_pkt_loss_excess_retry[4];4839	__le32 peer_rssi_changed;4840} __packed;4841 4842struct wmi_10_4_peer_extd_stats {4843	struct wmi_mac_addr peer_macaddr;4844	__le32 inactive_time;4845	__le32 peer_chain_rssi;4846	__le32 rx_duration;4847	__le32 reserved[10];4848} __packed;4849 4850struct wmi_10_4_bss_bcn_stats {4851	__le32 vdev_id;4852	__le32 bss_bcns_dropped;4853	__le32 bss_bcn_delivered;4854} __packed;4855 4856struct wmi_10_4_bss_bcn_filter_stats {4857	__le32 bcns_dropped;4858	__le32 bcns_delivered;4859	__le32 active_filters;4860	struct wmi_10_4_bss_bcn_stats bss_stats;4861} __packed;4862 4863struct wmi_10_2_pdev_ext_stats {4864	__le32 rx_rssi_comb;4865	__le32 rx_rssi[4];4866	__le32 rx_mcs[10];4867	__le32 tx_mcs[10];4868	__le32 ack_rssi;4869} __packed;4870 4871struct wmi_vdev_create_cmd {4872	__le32 vdev_id;4873	__le32 vdev_type;4874	__le32 vdev_subtype;4875	struct wmi_mac_addr vdev_macaddr;4876} __packed;4877 4878enum wmi_vdev_type {4879	WMI_VDEV_TYPE_AP      = 1,4880	WMI_VDEV_TYPE_STA     = 2,4881	WMI_VDEV_TYPE_IBSS    = 3,4882	WMI_VDEV_TYPE_MONITOR = 4,4883};4884 4885enum wmi_vdev_subtype {4886	WMI_VDEV_SUBTYPE_NONE,4887	WMI_VDEV_SUBTYPE_P2P_DEVICE,4888	WMI_VDEV_SUBTYPE_P2P_CLIENT,4889	WMI_VDEV_SUBTYPE_P2P_GO,4890	WMI_VDEV_SUBTYPE_PROXY_STA,4891	WMI_VDEV_SUBTYPE_MESH_11S,4892	WMI_VDEV_SUBTYPE_MESH_NON_11S,4893};4894 4895enum wmi_vdev_subtype_legacy {4896	WMI_VDEV_SUBTYPE_LEGACY_NONE      = 0,4897	WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV   = 1,4898	WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI   = 2,4899	WMI_VDEV_SUBTYPE_LEGACY_P2P_GO    = 3,4900	WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,4901};4902 4903enum wmi_vdev_subtype_10_2_4 {4904	WMI_VDEV_SUBTYPE_10_2_4_NONE      = 0,4905	WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV   = 1,4906	WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI   = 2,4907	WMI_VDEV_SUBTYPE_10_2_4_P2P_GO    = 3,4908	WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,4909	WMI_VDEV_SUBTYPE_10_2_4_MESH_11S  = 5,4910};4911 4912enum wmi_vdev_subtype_10_4 {4913	WMI_VDEV_SUBTYPE_10_4_NONE         = 0,4914	WMI_VDEV_SUBTYPE_10_4_P2P_DEV      = 1,4915	WMI_VDEV_SUBTYPE_10_4_P2P_CLI      = 2,4916	WMI_VDEV_SUBTYPE_10_4_P2P_GO       = 3,4917	WMI_VDEV_SUBTYPE_10_4_PROXY_STA    = 4,4918	WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,4919	WMI_VDEV_SUBTYPE_10_4_MESH_11S     = 6,4920};4921 4922/* values for vdev_subtype */4923 4924/* values for vdev_start_request flags */4925/*4926 * Indicates that AP VDEV uses hidden ssid. only valid for4927 *  AP/GO4928 */4929#define WMI_VDEV_START_HIDDEN_SSID  (1 << 0)4930/*4931 * Indicates if robust management frame/management frame4932 *  protection is enabled. For GO/AP vdevs, it indicates that4933 *  it may support station/client associations with RMF enabled.4934 *  For STA/client vdevs, it indicates that sta will4935 *  associate with AP with RMF enabled.4936 */4937#define WMI_VDEV_START_PMF_ENABLED  (1 << 1)4938 4939struct wmi_p2p_noa_descriptor {4940	__le32 type_count; /* 255: continuous schedule, 0: reserved */4941	__le32 duration;  /* Absent period duration in micro seconds */4942	__le32 interval;   /* Absent period interval in micro seconds */4943	__le32 start_time; /* 32 bit tsf time when in starts */4944} __packed;4945 4946struct wmi_vdev_start_request_cmd {4947	/* WMI channel */4948	struct wmi_channel chan;4949	/* unique id identifying the VDEV, generated by the caller */4950	__le32 vdev_id;4951	/* requestor id identifying the caller module */4952	__le32 requestor_id;4953	/* beacon interval from received beacon */4954	__le32 beacon_interval;4955	/* DTIM Period from the received beacon */4956	__le32 dtim_period;4957	/* Flags */4958	__le32 flags;4959	/* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */4960	struct wmi_ssid ssid;4961	/* beacon/probe response xmit rate. Applicable for SoftAP. */4962	__le32 bcn_tx_rate;4963	/* beacon/probe response xmit power. Applicable for SoftAP. */4964	__le32 bcn_tx_power;4965	/* number of p2p NOA descriptor(s) from scan entry */4966	__le32 num_noa_descriptors;4967	/*4968	 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.4969	 * During CAC, Our HW shouldn't ack ditected frames4970	 */4971	__le32 disable_hw_ack;4972	/* actual p2p NOA descriptor from scan entry */4973	struct wmi_p2p_noa_descriptor noa_descriptors[2];4974} __packed;4975 4976struct wmi_vdev_restart_request_cmd {4977	struct wmi_vdev_start_request_cmd vdev_start_request_cmd;4978} __packed;4979 4980struct wmi_vdev_start_request_arg {4981	u32 vdev_id;4982	struct wmi_channel_arg channel;4983	u32 bcn_intval;4984	u32 dtim_period;4985	u8 *ssid;4986	u32 ssid_len;4987	u32 bcn_tx_rate;4988	u32 bcn_tx_power;4989	bool disable_hw_ack;4990	bool hidden_ssid;4991	bool pmf_enabled;4992};4993 4994struct wmi_vdev_delete_cmd {4995	/* unique id identifying the VDEV, generated by the caller */4996	__le32 vdev_id;4997} __packed;4998 4999struct wmi_vdev_up_cmd {5000	__le32 vdev_id;5001	__le32 vdev_assoc_id;5002	struct wmi_mac_addr vdev_bssid;5003} __packed;5004 5005struct wmi_vdev_stop_cmd {5006	__le32 vdev_id;5007} __packed;5008 5009struct wmi_vdev_down_cmd {5010	__le32 vdev_id;5011} __packed;5012 5013struct wmi_vdev_standby_response_cmd {5014	/* unique id identifying the VDEV, generated by the caller */5015	__le32 vdev_id;5016} __packed;5017 5018struct wmi_vdev_resume_response_cmd {5019	/* unique id identifying the VDEV, generated by the caller */5020	__le32 vdev_id;5021} __packed;5022 5023struct wmi_vdev_set_param_cmd {5024	__le32 vdev_id;5025	__le32 param_id;5026	__le32 param_value;5027} __packed;5028 5029#define WMI_MAX_KEY_INDEX   35030#define WMI_MAX_KEY_LEN     325031 5032#define WMI_KEY_PAIRWISE 0x005033#define WMI_KEY_GROUP    0x015034#define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */5035 5036struct wmi_key_seq_counter {5037	__le32 key_seq_counter_l;5038	__le32 key_seq_counter_h;5039} __packed;5040 5041enum wmi_cipher_suites {5042	WMI_CIPHER_NONE,5043	WMI_CIPHER_WEP,5044	WMI_CIPHER_TKIP,5045	WMI_CIPHER_AES_OCB,5046	WMI_CIPHER_AES_CCM,5047	WMI_CIPHER_WAPI,5048	WMI_CIPHER_CKIP,5049	WMI_CIPHER_AES_CMAC,5050	WMI_CIPHER_AES_GCM,5051};5052 5053enum wmi_tlv_cipher_suites {5054	WMI_TLV_CIPHER_NONE,5055	WMI_TLV_CIPHER_WEP,5056	WMI_TLV_CIPHER_TKIP,5057	WMI_TLV_CIPHER_AES_OCB,5058	WMI_TLV_CIPHER_AES_CCM,5059	WMI_TLV_CIPHER_WAPI,5060	WMI_TLV_CIPHER_CKIP,5061	WMI_TLV_CIPHER_AES_CMAC,5062	WMI_TLV_CIPHER_ANY,5063	WMI_TLV_CIPHER_AES_GCM,5064};5065 5066struct wmi_vdev_install_key_cmd {5067	__le32 vdev_id;5068	struct wmi_mac_addr peer_macaddr;5069	__le32 key_idx;5070	__le32 key_flags;5071	__le32 key_cipher; /* %WMI_CIPHER_ */5072	struct wmi_key_seq_counter key_rsc_counter;5073	struct wmi_key_seq_counter key_global_rsc_counter;5074	struct wmi_key_seq_counter key_tsc_counter;5075	u8 wpi_key_rsc_counter[16];5076	u8 wpi_key_tsc_counter[16];5077	__le32 key_len;5078	__le32 key_txmic_len;5079	__le32 key_rxmic_len;5080 5081	/* contains key followed by tx mic followed by rx mic */5082	u8 key_data[];5083} __packed;5084 5085struct wmi_vdev_install_key_arg {5086	u32 vdev_id;5087	const u8 *macaddr;5088	u32 key_idx;5089	u32 key_flags;5090	u32 key_cipher;5091	u32 key_len;5092	u32 key_txmic_len;5093	u32 key_rxmic_len;5094	const void *key_data;5095};5096 5097/*5098 * vdev fixed rate format:5099 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_5100 * - nss      - b5:b4 - ss number (0 mean 1ss)5101 * - rate_mcs - b3:b0 - as below5102 *    CCK:  0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,5103 *          4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)5104 *    OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,5105 *          4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps5106 *    HT/VHT: MCS index5107 */5108 5109/* Preamble types to be used with VDEV fixed rate configuration */5110enum wmi_rate_preamble {5111	WMI_RATE_PREAMBLE_OFDM,5112	WMI_RATE_PREAMBLE_CCK,5113	WMI_RATE_PREAMBLE_HT,5114	WMI_RATE_PREAMBLE_VHT,5115};5116 5117#define ATH10K_HW_NSS(rate)		(1 + (((rate) >> 4) & 0x3))5118#define ATH10K_HW_PREAMBLE(rate)	(((rate) >> 6) & 0x3)5119#define ATH10K_HW_MCS_RATE(rate)	((rate) & 0xf)5120#define ATH10K_HW_LEGACY_RATE(rate)	((rate) & 0x3f)5121#define ATH10K_HW_BW(flags)		(((flags) >> 3) & 0x3)5122#define ATH10K_HW_GI(flags)		(((flags) >> 5) & 0x1)5123#define ATH10K_HW_RATECODE(rate, nss, preamble) \5124	(((preamble) << 6) | ((nss) << 4) | (rate))5125#define ATH10K_HW_AMPDU(flags)		((flags) & 0x1)5126#define ATH10K_HW_BA_FAIL(flags)	(((flags) >> 1) & 0x3)5127#define ATH10K_FW_SKIPPED_RATE_CTRL(flags)	(((flags) >> 6) & 0x1)5128 5129#define ATH10K_VHT_MCS_NUM	105130#define ATH10K_BW_NUM		65131#define ATH10K_NSS_NUM		45132#define ATH10K_LEGACY_NUM	125133#define ATH10K_GI_NUM		25134#define ATH10K_HT_MCS_NUM	325135#define ATH10K_RATE_TABLE_NUM	3205136#define ATH10K_RATE_INFO_FLAGS_SGI_BIT	25137 5138/* Value to disable fixed rate setting */5139#define WMI_FIXED_RATE_NONE    (0xff)5140 5141struct wmi_peer_param_map {5142	u32 smps_state;5143	u32 ampdu;5144	u32 authorize;5145	u32 chan_width;5146	u32 nss;5147	u32 use_4addr;5148	u32 membership;5149	u32 use_fixed_power;5150	u32 user_pos;5151	u32 crit_proto_hint_enabled;5152	u32 tx_fail_cnt_thr;5153	u32 set_hw_retry_cts2s;5154	u32 ibss_atim_win_len;5155	u32 debug;5156	u32 phymode;5157	u32 dummy_var;5158};5159 5160struct wmi_vdev_param_map {5161	u32 rts_threshold;5162	u32 fragmentation_threshold;5163	u32 beacon_interval;5164	u32 listen_interval;5165	u32 multicast_rate;5166	u32 mgmt_tx_rate;5167	u32 slot_time;5168	u32 preamble;5169	u32 swba_time;5170	u32 wmi_vdev_stats_update_period;5171	u32 wmi_vdev_pwrsave_ageout_time;5172	u32 wmi_vdev_host_swba_interval;5173	u32 dtim_period;5174	u32 wmi_vdev_oc_scheduler_air_time_limit;5175	u32 wds;5176	u32 atim_window;5177	u32 bmiss_count_max;5178	u32 bmiss_first_bcnt;5179	u32 bmiss_final_bcnt;5180	u32 feature_wmm;5181	u32 chwidth;5182	u32 chextoffset;5183	u32 disable_htprotection;5184	u32 sta_quickkickout;5185	u32 mgmt_rate;5186	u32 protection_mode;5187	u32 fixed_rate;5188	u32 sgi;5189	u32 ldpc;5190	u32 tx_stbc;5191	u32 rx_stbc;5192	u32 intra_bss_fwd;5193	u32 def_keyid;5194	u32 nss;5195	u32 bcast_data_rate;5196	u32 mcast_data_rate;5197	u32 mcast_indicate;5198	u32 dhcp_indicate;5199	u32 unknown_dest_indicate;5200	u32 ap_keepalive_min_idle_inactive_time_secs;5201	u32 ap_keepalive_max_idle_inactive_time_secs;5202	u32 ap_keepalive_max_unresponsive_time_secs;5203	u32 ap_enable_nawds;5204	u32 mcast2ucast_set;5205	u32 enable_rtscts;5206	u32 txbf;5207	u32 packet_powersave;5208	u32 drop_unencry;5209	u32 tx_encap_type;5210	u32 ap_detect_out_of_sync_sleeping_sta_time_secs;5211	u32 rc_num_retries;5212	u32 cabq_maxdur;5213	u32 mfptest_set;5214	u32 rts_fixed_rate;5215	u32 vht_sgimask;5216	u32 vht80_ratemask;5217	u32 early_rx_adjust_enable;5218	u32 early_rx_tgt_bmiss_num;5219	u32 early_rx_bmiss_sample_cycle;5220	u32 early_rx_slop_step;5221	u32 early_rx_init_slop;5222	u32 early_rx_adjust_pause;5223	u32 proxy_sta;5224	u32 meru_vc;5225	u32 rx_decap_type;5226	u32 bw_nss_ratemask;5227	u32 inc_tsf;5228	u32 dec_tsf;5229	u32 disable_4addr_src_lrn;5230	u32 rtt_responder_role;5231};5232 5233#define WMI_VDEV_PARAM_UNSUPPORTED 05234 5235/* the definition of different VDEV parameters */5236enum wmi_vdev_param {5237	/* RTS Threshold */5238	WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,5239	/* Fragmentation threshold */5240	WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,5241	/* beacon interval in TUs */5242	WMI_VDEV_PARAM_BEACON_INTERVAL,5243	/* Listen interval in TUs */5244	WMI_VDEV_PARAM_LISTEN_INTERVAL,5245	/* multicast rate in Mbps */5246	WMI_VDEV_PARAM_MULTICAST_RATE,5247	/* management frame rate in Mbps */5248	WMI_VDEV_PARAM_MGMT_TX_RATE,5249	/* slot time (long vs short) */5250	WMI_VDEV_PARAM_SLOT_TIME,5251	/* preamble (long vs short) */5252	WMI_VDEV_PARAM_PREAMBLE,5253	/* SWBA time (time before tbtt in msec) */5254	WMI_VDEV_PARAM_SWBA_TIME,5255	/* time period for updating VDEV stats */5256	WMI_VDEV_STATS_UPDATE_PERIOD,5257	/* age out time in msec for frames queued for station in power save */5258	WMI_VDEV_PWRSAVE_AGEOUT_TIME,5259	/*5260	 * Host SWBA interval (time in msec before tbtt for SWBA event5261	 * generation).5262	 */5263	WMI_VDEV_HOST_SWBA_INTERVAL,5264	/* DTIM period (specified in units of num beacon intervals) */5265	WMI_VDEV_PARAM_DTIM_PERIOD,5266	/*5267	 * scheduler air time limit for this VDEV. used by off chan5268	 * scheduler.5269	 */5270	WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,5271	/* enable/disable WDS for this VDEV  */5272	WMI_VDEV_PARAM_WDS,5273	/* ATIM Window */5274	WMI_VDEV_PARAM_ATIM_WINDOW,5275	/* BMISS max */5276	WMI_VDEV_PARAM_BMISS_COUNT_MAX,5277	/* BMISS first time */5278	WMI_VDEV_PARAM_BMISS_FIRST_BCNT,5279	/* BMISS final time */5280	WMI_VDEV_PARAM_BMISS_FINAL_BCNT,5281	/* WMM enables/disabled */5282	WMI_VDEV_PARAM_FEATURE_WMM,5283	/* Channel width */5284	WMI_VDEV_PARAM_CHWIDTH,5285	/* Channel Offset */5286	WMI_VDEV_PARAM_CHEXTOFFSET,5287	/* Disable HT Protection */5288	WMI_VDEV_PARAM_DISABLE_HTPROTECTION,5289	/* Quick STA Kickout */5290	WMI_VDEV_PARAM_STA_QUICKKICKOUT,5291	/* Rate to be used with Management frames */5292	WMI_VDEV_PARAM_MGMT_RATE,5293	/* Protection Mode */5294	WMI_VDEV_PARAM_PROTECTION_MODE,5295	/* Fixed rate setting */5296	WMI_VDEV_PARAM_FIXED_RATE,5297	/* Short GI Enable/Disable */5298	WMI_VDEV_PARAM_SGI,5299	/* Enable LDPC */5300	WMI_VDEV_PARAM_LDPC,5301	/* Enable Tx STBC */5302	WMI_VDEV_PARAM_TX_STBC,5303	/* Enable Rx STBC */5304	WMI_VDEV_PARAM_RX_STBC,5305	/* Intra BSS forwarding  */5306	WMI_VDEV_PARAM_INTRA_BSS_FWD,5307	/* Setting Default xmit key for Vdev */5308	WMI_VDEV_PARAM_DEF_KEYID,5309	/* NSS width */5310	WMI_VDEV_PARAM_NSS,5311	/* Set the custom rate for the broadcast data frames */5312	WMI_VDEV_PARAM_BCAST_DATA_RATE,5313	/* Set the custom rate (rate-code) for multicast data frames */5314	WMI_VDEV_PARAM_MCAST_DATA_RATE,5315	/* Tx multicast packet indicate Enable/Disable */5316	WMI_VDEV_PARAM_MCAST_INDICATE,5317	/* Tx DHCP packet indicate Enable/Disable */5318	WMI_VDEV_PARAM_DHCP_INDICATE,5319	/* Enable host inspection of Tx unicast packet to unknown destination */5320	WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,5321 5322	/* The minimum amount of time AP begins to consider STA inactive */5323	WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,5324 5325	/*5326	 * An associated STA is considered inactive when there is no recent5327	 * TX/RX activity and no downlink frames are buffered for it. Once a5328	 * STA exceeds the maximum idle inactive time, the AP will send an5329	 * 802.11 data-null as a keep alive to verify the STA is still5330	 * associated. If the STA does ACK the data-null, or if the data-null5331	 * is buffered and the STA does not retrieve it, the STA will be5332	 * considered unresponsive5333	 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).5334	 */5335	WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,5336 5337	/*5338	 * An associated STA is considered unresponsive if there is no recent5339	 * TX/RX activity and downlink frames are buffered for it. Once a STA5340	 * exceeds the maximum unresponsive time, the AP will send a5341	 * WMI_STA_KICKOUT event to the host so the STA can be deleted.5342	 */5343	WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,5344 5345	/* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */5346	WMI_VDEV_PARAM_AP_ENABLE_NAWDS,5347	/* Enable/Disable RTS-CTS */5348	WMI_VDEV_PARAM_ENABLE_RTSCTS,5349	/* Enable TXBFee/er */5350	WMI_VDEV_PARAM_TXBF,5351 5352	/* Set packet power save */5353	WMI_VDEV_PARAM_PACKET_POWERSAVE,5354 5355	/*5356	 * Drops un-encrypted packets if eceived in an encrypted connection5357	 * otherwise forwards to host.5358	 */5359	WMI_VDEV_PARAM_DROP_UNENCRY,5360 5361	/*5362	 * Set the encapsulation type for frames.5363	 */5364	WMI_VDEV_PARAM_TX_ENCAP_TYPE,5365};5366 5367/* the definition of different VDEV parameters */5368enum wmi_10x_vdev_param {5369	/* RTS Threshold */5370	WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,5371	/* Fragmentation threshold */5372	WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,5373	/* beacon interval in TUs */5374	WMI_10X_VDEV_PARAM_BEACON_INTERVAL,5375	/* Listen interval in TUs */5376	WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,5377	/* multicast rate in Mbps */5378	WMI_10X_VDEV_PARAM_MULTICAST_RATE,5379	/* management frame rate in Mbps */5380	WMI_10X_VDEV_PARAM_MGMT_TX_RATE,5381	/* slot time (long vs short) */5382	WMI_10X_VDEV_PARAM_SLOT_TIME,5383	/* preamble (long vs short) */5384	WMI_10X_VDEV_PARAM_PREAMBLE,5385	/* SWBA time (time before tbtt in msec) */5386	WMI_10X_VDEV_PARAM_SWBA_TIME,5387	/* time period for updating VDEV stats */5388	WMI_10X_VDEV_STATS_UPDATE_PERIOD,5389	/* age out time in msec for frames queued for station in power save */5390	WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,5391	/*5392	 * Host SWBA interval (time in msec before tbtt for SWBA event5393	 * generation).5394	 */5395	WMI_10X_VDEV_HOST_SWBA_INTERVAL,5396	/* DTIM period (specified in units of num beacon intervals) */5397	WMI_10X_VDEV_PARAM_DTIM_PERIOD,5398	/*5399	 * scheduler air time limit for this VDEV. used by off chan5400	 * scheduler.5401	 */5402	WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,5403	/* enable/disable WDS for this VDEV  */5404	WMI_10X_VDEV_PARAM_WDS,5405	/* ATIM Window */5406	WMI_10X_VDEV_PARAM_ATIM_WINDOW,5407	/* BMISS max */5408	WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,5409	/* WMM enables/disabled */5410	WMI_10X_VDEV_PARAM_FEATURE_WMM,5411	/* Channel width */5412	WMI_10X_VDEV_PARAM_CHWIDTH,5413	/* Channel Offset */5414	WMI_10X_VDEV_PARAM_CHEXTOFFSET,5415	/* Disable HT Protection */5416	WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,5417	/* Quick STA Kickout */5418	WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,5419	/* Rate to be used with Management frames */5420	WMI_10X_VDEV_PARAM_MGMT_RATE,5421	/* Protection Mode */5422	WMI_10X_VDEV_PARAM_PROTECTION_MODE,5423	/* Fixed rate setting */5424	WMI_10X_VDEV_PARAM_FIXED_RATE,5425	/* Short GI Enable/Disable */5426	WMI_10X_VDEV_PARAM_SGI,5427	/* Enable LDPC */5428	WMI_10X_VDEV_PARAM_LDPC,5429	/* Enable Tx STBC */5430	WMI_10X_VDEV_PARAM_TX_STBC,5431	/* Enable Rx STBC */5432	WMI_10X_VDEV_PARAM_RX_STBC,5433	/* Intra BSS forwarding  */5434	WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,5435	/* Setting Default xmit key for Vdev */5436	WMI_10X_VDEV_PARAM_DEF_KEYID,5437	/* NSS width */5438	WMI_10X_VDEV_PARAM_NSS,5439	/* Set the custom rate for the broadcast data frames */5440	WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,5441	/* Set the custom rate (rate-code) for multicast data frames */5442	WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,5443	/* Tx multicast packet indicate Enable/Disable */5444	WMI_10X_VDEV_PARAM_MCAST_INDICATE,5445	/* Tx DHCP packet indicate Enable/Disable */5446	WMI_10X_VDEV_PARAM_DHCP_INDICATE,5447	/* Enable host inspection of Tx unicast packet to unknown destination */5448	WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,5449 5450	/* The minimum amount of time AP begins to consider STA inactive */5451	WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,5452 5453	/*5454	 * An associated STA is considered inactive when there is no recent5455	 * TX/RX activity and no downlink frames are buffered for it. Once a5456	 * STA exceeds the maximum idle inactive time, the AP will send an5457	 * 802.11 data-null as a keep alive to verify the STA is still5458	 * associated. If the STA does ACK the data-null, or if the data-null5459	 * is buffered and the STA does not retrieve it, the STA will be5460	 * considered unresponsive5461	 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).5462	 */5463	WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,5464 5465	/*5466	 * An associated STA is considered unresponsive if there is no recent5467	 * TX/RX activity and downlink frames are buffered for it. Once a STA5468	 * exceeds the maximum unresponsive time, the AP will send a5469	 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted.5470	 */5471	WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,5472 5473	/* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */5474	WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,5475 5476	WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,5477	/* Enable/Disable RTS-CTS */5478	WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,5479 5480	WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,5481 5482	/* following are available as of firmware 10.2 */5483	WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,5484	WMI_10X_VDEV_PARAM_CABQ_MAXDUR,5485	WMI_10X_VDEV_PARAM_MFPTEST_SET,5486	WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,5487	WMI_10X_VDEV_PARAM_VHT_SGIMASK,5488	WMI_10X_VDEV_PARAM_VHT80_RATEMASK,5489	WMI_10X_VDEV_PARAM_TSF_INCREMENT,5490};5491 5492enum wmi_10_4_vdev_param {5493	WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,5494	WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,5495	WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,5496	WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,5497	WMI_10_4_VDEV_PARAM_MULTICAST_RATE,5498	WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,5499	WMI_10_4_VDEV_PARAM_SLOT_TIME,5500	WMI_10_4_VDEV_PARAM_PREAMBLE,5501	WMI_10_4_VDEV_PARAM_SWBA_TIME,5502	WMI_10_4_VDEV_STATS_UPDATE_PERIOD,5503	WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,5504	WMI_10_4_VDEV_HOST_SWBA_INTERVAL,5505	WMI_10_4_VDEV_PARAM_DTIM_PERIOD,5506	WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,5507	WMI_10_4_VDEV_PARAM_WDS,5508	WMI_10_4_VDEV_PARAM_ATIM_WINDOW,5509	WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,5510	WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,5511	WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,5512	WMI_10_4_VDEV_PARAM_FEATURE_WMM,5513	WMI_10_4_VDEV_PARAM_CHWIDTH,5514	WMI_10_4_VDEV_PARAM_CHEXTOFFSET,5515	WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,5516	WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,5517	WMI_10_4_VDEV_PARAM_MGMT_RATE,5518	WMI_10_4_VDEV_PARAM_PROTECTION_MODE,5519	WMI_10_4_VDEV_PARAM_FIXED_RATE,5520	WMI_10_4_VDEV_PARAM_SGI,5521	WMI_10_4_VDEV_PARAM_LDPC,5522	WMI_10_4_VDEV_PARAM_TX_STBC,5523	WMI_10_4_VDEV_PARAM_RX_STBC,5524	WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,5525	WMI_10_4_VDEV_PARAM_DEF_KEYID,5526	WMI_10_4_VDEV_PARAM_NSS,5527	WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,5528	WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,5529	WMI_10_4_VDEV_PARAM_MCAST_INDICATE,5530	WMI_10_4_VDEV_PARAM_DHCP_INDICATE,5531	WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,5532	WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,5533	WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,5534	WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,5535	WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,5536	WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,5537	WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,5538	WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,5539	WMI_10_4_VDEV_PARAM_TXBF,5540	WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,5541	WMI_10_4_VDEV_PARAM_DROP_UNENCRY,5542	WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,5543	WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,5544	WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,5545	WMI_10_4_VDEV_PARAM_MFPTEST_SET,5546	WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,5547	WMI_10_4_VDEV_PARAM_VHT_SGIMASK,5548	WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,5549	WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,5550	WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,5551	WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,5552	WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,5553	WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,5554	WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,5555	WMI_10_4_VDEV_PARAM_PROXY_STA,5556	WMI_10_4_VDEV_PARAM_MERU_VC,5557	WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,5558	WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,5559	WMI_10_4_VDEV_PARAM_SENSOR_AP,5560	WMI_10_4_VDEV_PARAM_BEACON_RATE,5561	WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS,5562	WMI_10_4_VDEV_PARAM_STA_KICKOUT,5563	WMI_10_4_VDEV_PARAM_CAPABILITIES,5564	WMI_10_4_VDEV_PARAM_TSF_INCREMENT,5565	WMI_10_4_VDEV_PARAM_RX_FILTER,5566	WMI_10_4_VDEV_PARAM_MGMT_TX_POWER,5567	WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,5568	WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,5569	WMI_10_4_VDEV_PARAM_TSF_DECREMENT,5570	WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE,5571	WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC,5572	WMI_10_4_VDEV_PARAM_NSS_VHT160,5573	WMI_10_4_VDEV_PARAM_NSS_VHT80_80,5574	WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC,5575	WMI_10_4_VDEV_PARAM_DISABLE_CABQ,5576	WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE,5577	WMI_10_4_VDEV_PARAM_TX_POWER,5578	WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,5579	WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN,5580};5581 5582#define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 15583 5584#define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)5585#define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)5586#define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)5587#define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)5588 5589#define WMI_TXBF_STS_CAP_OFFSET_LSB	45590#define WMI_TXBF_STS_CAP_OFFSET_MASK	0x705591#define WMI_TXBF_CONF_IMPLICIT_BF       BIT(7)5592#define WMI_BF_SOUND_DIM_OFFSET_LSB	85593#define WMI_BF_SOUND_DIM_OFFSET_MASK	0xf005594 5595/* slot time long */5596#define WMI_VDEV_SLOT_TIME_LONG		0x15597/* slot time short */5598#define WMI_VDEV_SLOT_TIME_SHORT	0x25599/* preablbe long */5600#define WMI_VDEV_PREAMBLE_LONG		0x15601/* preablbe short */5602#define WMI_VDEV_PREAMBLE_SHORT		0x25603 5604enum wmi_start_event_param {5605	WMI_VDEV_RESP_START_EVENT = 0,5606	WMI_VDEV_RESP_RESTART_EVENT,5607};5608 5609struct wmi_vdev_start_response_event {5610	__le32 vdev_id;5611	__le32 req_id;5612	__le32 resp_type; /* %WMI_VDEV_RESP_ */5613	__le32 status;5614} __packed;5615 5616struct wmi_vdev_standby_req_event {5617	/* unique id identifying the VDEV, generated by the caller */5618	__le32 vdev_id;5619} __packed;5620 5621struct wmi_vdev_resume_req_event {5622	/* unique id identifying the VDEV, generated by the caller */5623	__le32 vdev_id;5624} __packed;5625 5626struct wmi_vdev_stopped_event {5627	/* unique id identifying the VDEV, generated by the caller */5628	__le32 vdev_id;5629} __packed;5630 5631/*5632 * common structure used for simple events5633 * (stopped, resume_req, standby response)5634 */5635struct wmi_vdev_simple_event {5636	/* unique id identifying the VDEV, generated by the caller */5637	__le32 vdev_id;5638} __packed;5639 5640/* VDEV start response status codes */5641/* VDEV successfully started */5642#define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS	0x05643 5644/* requested VDEV not found */5645#define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID	0x15646 5647/* unsupported VDEV combination */5648#define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED	0x25649 5650/* TODO: please add more comments if you have in-depth information */5651struct wmi_vdev_spectral_conf_cmd {5652	__le32 vdev_id;5653 5654	/* number of fft samples to send (0 for infinite) */5655	__le32 scan_count;5656	__le32 scan_period;5657	__le32 scan_priority;5658 5659	/* number of bins in the FFT: 2^(fft_size - bin_scale) */5660	__le32 scan_fft_size;5661	__le32 scan_gc_ena;5662	__le32 scan_restart_ena;5663	__le32 scan_noise_floor_ref;5664	__le32 scan_init_delay;5665	__le32 scan_nb_tone_thr;5666	__le32 scan_str_bin_thr;5667	__le32 scan_wb_rpt_mode;5668	__le32 scan_rssi_rpt_mode;5669	__le32 scan_rssi_thr;5670	__le32 scan_pwr_format;5671 5672	/* rpt_mode: Format of FFT report to software for spectral scan5673	 * triggered FFTs:5674	 *	0: No FFT report (only spectral scan summary report)5675	 *	1: 2-dword summary of metrics for each completed FFT + spectral5676	 *	   scan	summary report5677	 *	2: 2-dword summary of metrics for each completed FFT +5678	 *	   1x- oversampled bins(in-band) per FFT + spectral scan summary5679	 *	   report5680	 *	3: 2-dword summary of metrics for each completed FFT +5681	 *	   2x- oversampled bins	(all) per FFT + spectral scan summary5682	 */5683	__le32 scan_rpt_mode;5684	__le32 scan_bin_scale;5685	__le32 scan_dbm_adj;5686	__le32 scan_chn_mask;5687} __packed;5688 5689struct wmi_vdev_spectral_conf_arg {5690	u32 vdev_id;5691	u32 scan_count;5692	u32 scan_period;5693	u32 scan_priority;5694	u32 scan_fft_size;5695	u32 scan_gc_ena;5696	u32 scan_restart_ena;5697	u32 scan_noise_floor_ref;5698	u32 scan_init_delay;5699	u32 scan_nb_tone_thr;5700	u32 scan_str_bin_thr;5701	u32 scan_wb_rpt_mode;5702	u32 scan_rssi_rpt_mode;5703	u32 scan_rssi_thr;5704	u32 scan_pwr_format;5705	u32 scan_rpt_mode;5706	u32 scan_bin_scale;5707	u32 scan_dbm_adj;5708	u32 scan_chn_mask;5709};5710 5711#define WMI_SPECTRAL_ENABLE_DEFAULT              05712#define WMI_SPECTRAL_COUNT_DEFAULT               05713#define WMI_SPECTRAL_PERIOD_DEFAULT             355714#define WMI_SPECTRAL_PRIORITY_DEFAULT            15715#define WMI_SPECTRAL_FFT_SIZE_DEFAULT            75716#define WMI_SPECTRAL_GC_ENA_DEFAULT              15717#define WMI_SPECTRAL_RESTART_ENA_DEFAULT         05718#define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT   -965719#define WMI_SPECTRAL_INIT_DELAY_DEFAULT         805720#define WMI_SPECTRAL_NB_TONE_THR_DEFAULT        125721#define WMI_SPECTRAL_STR_BIN_THR_DEFAULT         85722#define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT         05723#define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT       05724#define WMI_SPECTRAL_RSSI_THR_DEFAULT         0xf05725#define WMI_SPECTRAL_PWR_FORMAT_DEFAULT          05726#define WMI_SPECTRAL_RPT_MODE_DEFAULT            25727#define WMI_SPECTRAL_BIN_SCALE_DEFAULT           15728#define WMI_SPECTRAL_DBM_ADJ_DEFAULT             15729#define WMI_SPECTRAL_CHN_MASK_DEFAULT            15730 5731struct wmi_vdev_spectral_enable_cmd {5732	__le32 vdev_id;5733	__le32 trigger_cmd;5734	__le32 enable_cmd;5735} __packed;5736 5737#define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER  15738#define WMI_SPECTRAL_TRIGGER_CMD_CLEAR    25739#define WMI_SPECTRAL_ENABLE_CMD_ENABLE    15740#define WMI_SPECTRAL_ENABLE_CMD_DISABLE   25741 5742/* Beacon processing related command and event structures */5743struct wmi_bcn_tx_hdr {5744	__le32 vdev_id;5745	__le32 tx_rate;5746	__le32 tx_power;5747	__le32 bcn_len;5748} __packed;5749 5750struct wmi_bcn_tx_cmd {5751	struct wmi_bcn_tx_hdr hdr;5752	u8 *bcn[];5753} __packed;5754 5755struct wmi_bcn_tx_arg {5756	u32 vdev_id;5757	u32 tx_rate;5758	u32 tx_power;5759	u32 bcn_len;5760	const void *bcn;5761};5762 5763enum wmi_bcn_tx_ref_flags {5764	WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,5765	WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,5766};5767 5768/* TODO: It is unclear why "no antenna" works while any other seemingly valid5769 * chainmask yields no beacons on the air at all.5770 */5771#define WMI_BCN_TX_REF_DEF_ANTENNA 05772 5773struct wmi_bcn_tx_ref_cmd {5774	__le32 vdev_id;5775	__le32 data_len;5776	/* physical address of the frame - dma pointer */5777	__le32 data_ptr;5778	/* id for host to track */5779	__le32 msdu_id;5780	/* frame ctrl to setup PPDU desc */5781	__le32 frame_control;5782	/* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */5783	__le32 flags;5784	/* introduced in 10.2 */5785	__le32 antenna_mask;5786} __packed;5787 5788/* Beacon filter */5789#define WMI_BCN_FILTER_ALL   0 /* Filter all beacons */5790#define WMI_BCN_FILTER_NONE  1 /* Pass all beacons */5791#define WMI_BCN_FILTER_RSSI  2 /* Pass Beacons RSSI >= RSSI threshold */5792#define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */5793#define WMI_BCN_FILTER_SSID  4 /* Pass Beacons with matching SSID */5794 5795struct wmi_bcn_filter_rx_cmd {5796	/* Filter ID */5797	__le32 bcn_filter_id;5798	/* Filter type - wmi_bcn_filter */5799	__le32 bcn_filter;5800	/* Buffer len */5801	__le32 bcn_filter_len;5802	/* Filter info (threshold, BSSID, RSSI) */5803	u8 *bcn_filter_buf;5804} __packed;5805 5806/* Capabilities and IEs to be passed to firmware */5807struct wmi_bcn_prb_info {5808	/* Capabilities */5809	__le32 caps;5810	/* ERP info */5811	__le32 erp;5812	/* Advanced capabilities */5813	/* HT capabilities */5814	/* HT Info */5815	/* ibss_dfs */5816	/* wpa Info */5817	/* rsn Info */5818	/* rrm info */5819	/* ath_ext */5820	/* app IE */5821} __packed;5822 5823enum wmi_sta_ps_mode {5824	/* enable power save for the given STA VDEV */5825	WMI_STA_PS_MODE_DISABLED = 0,5826	/* disable power save  for a given STA VDEV */5827	WMI_STA_PS_MODE_ENABLED = 1,5828};5829 5830struct wmi_sta_powersave_mode_cmd {5831	/* unique id identifying the VDEV, generated by the caller */5832	__le32 vdev_id;5833 5834	/*5835	 * Power save mode5836	 * (see enum wmi_sta_ps_mode)5837	 */5838	__le32 sta_ps_mode;5839} __packed;5840 5841enum wmi_csa_offload_en {5842	WMI_CSA_OFFLOAD_DISABLE = 0,5843	WMI_CSA_OFFLOAD_ENABLE = 1,5844};5845 5846struct wmi_csa_offload_enable_cmd {5847	__le32 vdev_id;5848	__le32 csa_offload_enable;5849} __packed;5850 5851struct wmi_csa_offload_chanswitch_cmd {5852	__le32 vdev_id;5853	struct wmi_channel chan;5854} __packed;5855 5856/*5857 * This parameter controls the policy for retrieving frames from AP while the5858 * STA is in sleep state.5859 *5860 * Only takes affect if the sta_ps_mode is enabled5861 */5862enum wmi_sta_ps_param_rx_wake_policy {5863	/*5864	 * Wake up when ever there is an  RX activity on the VDEV. In this mode5865	 * the Power save SM(state machine) will come out of sleep by either5866	 * sending null frame (or) a data frame (with PS==0) in response to TIM5867	 * bit set in the received beacon frame from AP.5868	 */5869	WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,5870 5871	/*5872	 * Here the power save state machine will not wakeup in response to TIM5873	 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD5874	 * configuration setup by WMISET_PS_SET_UAPSD  WMI command.  When all5875	 * access categories are delivery-enabled, the station will send a5876	 * UAPSD trigger frame, otherwise it will send a PS-Poll.5877	 */5878	WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,5879};5880 5881/*5882 * Number of tx frames/beacon  that cause the power save SM to wake up.5883 *5884 * Value 1 causes the SM to wake up for every TX. Value 0 has a special5885 * meaning, It will cause the SM to never wake up. This is useful if you want5886 * to keep the system to sleep all the time for some kind of test mode . host5887 * can change this parameter any time.  It will affect at the next tx frame.5888 */5889enum wmi_sta_ps_param_tx_wake_threshold {5890	WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,5891	WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,5892 5893	/*5894	 * Values greater than one indicate that many TX attempts per beacon5895	 * interval before the STA will wake up5896	 */5897};5898 5899/*5900 * The maximum number of PS-Poll frames the FW will send in response to5901 * traffic advertised in TIM before waking up (by sending a null frame with PS5902 * = 0). Value 0 has a special meaning: there is no maximum count and the FW5903 * will send as many PS-Poll as are necessary to retrieve buffered BU. This5904 * parameter is used when the RX wake policy is5905 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake5906 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.5907 */5908enum wmi_sta_ps_param_pspoll_count {5909	WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,5910	/*5911	 * Values greater than 0 indicate the maximum number of PS-Poll frames5912	 * FW will send before waking up.5913	 */5914 5915	/* When u-APSD is enabled the firmware will be very reluctant to exit5916	 * STA PS. This could result in very poor Rx performance with STA doing5917	 * PS-Poll for each and every buffered frame. This value is a bit5918	 * arbitrary.5919	 */5920	WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,5921};5922 5923/*5924 * This will include the delivery and trigger enabled state for every AC.5925 * This is the negotiated state with AP. The host MLME needs to set this based5926 * on AP capability and the state Set in the association request by the5927 * station MLME.Lower 8 bits of the value specify the UAPSD configuration.5928 */5929#define WMI_UAPSD_AC_TYPE_DELI 05930#define WMI_UAPSD_AC_TYPE_TRIG 15931 5932#define WMI_UAPSD_AC_BIT_MASK(ac, type) \5933	(type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1))5934 5935enum wmi_sta_ps_param_uapsd {5936	WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),5937	WMI_STA_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),5938	WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),5939	WMI_STA_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),5940	WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),5941	WMI_STA_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),5942	WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),5943	WMI_STA_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),5944};5945 5946#define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX5947 5948struct wmi_sta_uapsd_auto_trig_param {5949	__le32 wmm_ac;5950	__le32 user_priority;5951	__le32 service_interval;5952	__le32 suspend_interval;5953	__le32 delay_interval;5954};5955 5956struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {5957	__le32 vdev_id;5958	struct wmi_mac_addr peer_macaddr;5959	__le32 num_ac;5960};5961 5962struct wmi_sta_uapsd_auto_trig_arg {5963	u32 wmm_ac;5964	u32 user_priority;5965	u32 service_interval;5966	u32 suspend_interval;5967	u32 delay_interval;5968};5969 5970enum wmi_sta_powersave_param {5971	/*5972	 * Controls how frames are retrievd from AP while STA is sleeping5973	 *5974	 * (see enum wmi_sta_ps_param_rx_wake_policy)5975	 */5976	WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,5977 5978	/*5979	 * The STA will go active after this many TX5980	 *5981	 * (see enum wmi_sta_ps_param_tx_wake_threshold)5982	 */5983	WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,5984 5985	/*5986	 * Number of PS-Poll to send before STA wakes up5987	 *5988	 * (see enum wmi_sta_ps_param_pspoll_count)5989	 *5990	 */5991	WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,5992 5993	/*5994	 * TX/RX inactivity time in msec before going to sleep.5995	 *5996	 * The power save SM will monitor tx/rx activity on the VDEV, if no5997	 * activity for the specified msec of the parameter the Power save5998	 * SM will go to sleep.5999	 */6000	WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,6001 6002	/*6003	 * Set uapsd configuration.6004	 *6005	 * (see enum wmi_sta_ps_param_uapsd)6006	 */6007	WMI_STA_PS_PARAM_UAPSD = 4,6008};6009 6010struct wmi_sta_powersave_param_cmd {6011	__le32 vdev_id;6012	__le32 param_id; /* %WMI_STA_PS_PARAM_ */6013	__le32 param_value;6014} __packed;6015 6016/* No MIMO power save */6017#define WMI_STA_MIMO_PS_MODE_DISABLE6018/* mimo powersave mode static*/6019#define WMI_STA_MIMO_PS_MODE_STATIC6020/* mimo powersave mode dynamic */6021#define WMI_STA_MIMO_PS_MODE_DYNAMIC6022 6023struct wmi_sta_mimo_ps_mode_cmd {6024	/* unique id identifying the VDEV, generated by the caller */6025	__le32 vdev_id;6026	/* mimo powersave mode as defined above */6027	__le32 mimo_pwrsave_mode;6028} __packed;6029 6030/* U-APSD configuration of peer station from (re)assoc request and TSPECs */6031enum wmi_ap_ps_param_uapsd {6032	WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),6033	WMI_AP_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),6034	WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),6035	WMI_AP_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),6036	WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),6037	WMI_AP_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),6038	WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),6039	WMI_AP_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),6040};6041 6042/* U-APSD maximum service period of peer station */6043enum wmi_ap_ps_peer_param_max_sp {6044	WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,6045	WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,6046	WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,6047	WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,6048	MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,6049};6050 6051/*6052 * AP power save parameter6053 * Set a power save specific parameter for a peer station6054 */6055enum wmi_ap_ps_peer_param {6056	/* Set uapsd configuration for a given peer.6057	 *6058	 * Include the delivery and trigger enabled state for every AC.6059	 * The host  MLME needs to set this based on AP capability and stations6060	 * request Set in the association request  received from the station.6061	 *6062	 * Lower 8 bits of the value specify the UAPSD configuration.6063	 *6064	 * (see enum wmi_ap_ps_param_uapsd)6065	 * The default value is 0.6066	 */6067	WMI_AP_PS_PEER_PARAM_UAPSD = 0,6068 6069	/*6070	 * Set the service period for a UAPSD capable station6071	 *6072	 * The service period from wme ie in the (re)assoc request frame.6073	 *6074	 * (see enum wmi_ap_ps_peer_param_max_sp)6075	 */6076	WMI_AP_PS_PEER_PARAM_MAX_SP = 1,6077 6078	/* Time in seconds for aging out buffered frames for STA in PS */6079	WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,6080};6081 6082struct wmi_ap_ps_peer_cmd {6083	/* unique id identifying the VDEV, generated by the caller */6084	__le32 vdev_id;6085 6086	/* peer MAC address */6087	struct wmi_mac_addr peer_macaddr;6088 6089	/* AP powersave param (see enum wmi_ap_ps_peer_param) */6090	__le32 param_id;6091 6092	/* AP powersave param value */6093	__le32 param_value;6094} __packed;6095 6096/* 128 clients = 4 words */6097#define WMI_TIM_BITMAP_ARRAY_SIZE 46098 6099struct wmi_tim_info {6100	__le32 tim_len;6101	__le32 tim_mcast;6102	__le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];6103	__le32 tim_changed;6104	__le32 tim_num_ps_pending;6105} __packed;6106 6107struct wmi_tim_info_arg {6108	__le32 tim_len;6109	__le32 tim_mcast;6110	const __le32 *tim_bitmap;6111	__le32 tim_changed;6112	__le32 tim_num_ps_pending;6113} __packed;6114 6115/* Maximum number of NOA Descriptors supported */6116#define WMI_P2P_MAX_NOA_DESCRIPTORS 46117#define WMI_P2P_OPPPS_ENABLE_BIT	BIT(0)6118#define WMI_P2P_OPPPS_CTWINDOW_OFFSET	16119#define WMI_P2P_NOA_CHANGED_BIT	BIT(0)6120 6121struct wmi_p2p_noa_info {6122	/* Bit 0 - Flag to indicate an update in NOA schedule6123	 * Bits 7-1 - Reserved6124	 */6125	u8 changed;6126	/* NOA index */6127	u8 index;6128	/* Bit 0 - Opp PS state of the AP6129	 * Bits 1-7 - Ctwindow in TUs6130	 */6131	u8 ctwindow_oppps;6132	/* Number of NOA descriptors */6133	u8 num_descriptors;6134 6135	struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];6136} __packed;6137 6138struct wmi_bcn_info {6139	struct wmi_tim_info tim_info;6140	struct wmi_p2p_noa_info p2p_noa_info;6141} __packed;6142 6143struct wmi_host_swba_event {6144	__le32 vdev_map;6145	struct wmi_bcn_info bcn_info[];6146} __packed;6147 6148struct wmi_10_2_4_bcn_info {6149	struct wmi_tim_info tim_info;6150	/* The 10.2.4 FW doesn't have p2p NOA info */6151} __packed;6152 6153struct wmi_10_2_4_host_swba_event {6154	__le32 vdev_map;6155	struct wmi_10_2_4_bcn_info bcn_info[];6156} __packed;6157 6158/* 16 words = 512 client + 1 word = for guard */6159#define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 176160 6161struct wmi_10_4_tim_info {6162	__le32 tim_len;6163	__le32 tim_mcast;6164	__le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];6165	__le32 tim_changed;6166	__le32 tim_num_ps_pending;6167} __packed;6168 6169#define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 16170 6171struct wmi_10_4_p2p_noa_info {6172	/* Bit 0 - Flag to indicate an update in NOA schedule6173	 * Bits 7-1 - Reserved6174	 */6175	u8 changed;6176	/* NOA index */6177	u8 index;6178	/* Bit 0 - Opp PS state of the AP6179	 * Bits 1-7 - Ctwindow in TUs6180	 */6181	u8 ctwindow_oppps;6182	/* Number of NOA descriptors */6183	u8 num_descriptors;6184 6185	struct wmi_p2p_noa_descriptor6186		noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];6187} __packed;6188 6189struct wmi_10_4_bcn_info {6190	struct wmi_10_4_tim_info tim_info;6191	struct wmi_10_4_p2p_noa_info p2p_noa_info;6192} __packed;6193 6194struct wmi_10_4_host_swba_event {6195	__le32 vdev_map;6196	struct wmi_10_4_bcn_info bcn_info[];6197} __packed;6198 6199#define WMI_MAX_AP_VDEV 166200 6201struct wmi_tbtt_offset_event {6202	__le32 vdev_map;6203	__le32 tbttoffset_list[WMI_MAX_AP_VDEV];6204} __packed;6205 6206struct wmi_peer_create_cmd {6207	__le32 vdev_id;6208	struct wmi_mac_addr peer_macaddr;6209	__le32 peer_type;6210} __packed;6211 6212enum wmi_peer_type {6213	WMI_PEER_TYPE_DEFAULT = 0,6214	WMI_PEER_TYPE_BSS = 1,6215	WMI_PEER_TYPE_TDLS = 2,6216};6217 6218struct wmi_peer_delete_cmd {6219	__le32 vdev_id;6220	struct wmi_mac_addr peer_macaddr;6221} __packed;6222 6223struct wmi_peer_flush_tids_cmd {6224	__le32 vdev_id;6225	struct wmi_mac_addr peer_macaddr;6226	__le32 peer_tid_bitmap;6227} __packed;6228 6229struct wmi_fixed_rate {6230	/*6231	 * rate mode . 0: disable fixed rate (auto rate)6232	 *   1: legacy (non 11n) rate  specified as ieee rate 2*Mbps6233	 *   2: ht20 11n rate  specified as mcs index6234	 *   3: ht40 11n rate  specified as mcs index6235	 */6236	__le32  rate_mode;6237	/*6238	 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)6239	 * and series 3 is stored at byte 3 (MSB)6240	 */6241	__le32  rate_series;6242	/*6243	 * 4 retry counts for 4 rate series. retry count for rate 0 is stored6244	 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 36245	 * (MSB)6246	 */6247	__le32  rate_retries;6248} __packed;6249 6250struct wmi_peer_fixed_rate_cmd {6251	/* unique id identifying the VDEV, generated by the caller */6252	__le32 vdev_id;6253	/* peer MAC address */6254	struct wmi_mac_addr peer_macaddr;6255	/* fixed rate */6256	struct wmi_fixed_rate peer_fixed_rate;6257} __packed;6258 6259#define WMI_MGMT_TID    176260 6261struct wmi_addba_clear_resp_cmd {6262	/* unique id identifying the VDEV, generated by the caller */6263	__le32 vdev_id;6264	/* peer MAC address */6265	struct wmi_mac_addr peer_macaddr;6266} __packed;6267 6268struct wmi_addba_send_cmd {6269	/* unique id identifying the VDEV, generated by the caller */6270	__le32 vdev_id;6271	/* peer MAC address */6272	struct wmi_mac_addr peer_macaddr;6273	/* Tid number */6274	__le32 tid;6275	/* Buffer/Window size*/6276	__le32 buffersize;6277} __packed;6278 6279struct wmi_delba_send_cmd {6280	/* unique id identifying the VDEV, generated by the caller */6281	__le32 vdev_id;6282	/* peer MAC address */6283	struct wmi_mac_addr peer_macaddr;6284	/* Tid number */6285	__le32 tid;6286	/* Is Initiator */6287	__le32 initiator;6288	/* Reason code */6289	__le32 reasoncode;6290} __packed;6291 6292struct wmi_addba_setresponse_cmd {6293	/* unique id identifying the vdev, generated by the caller */6294	__le32 vdev_id;6295	/* peer mac address */6296	struct wmi_mac_addr peer_macaddr;6297	/* Tid number */6298	__le32 tid;6299	/* status code */6300	__le32 statuscode;6301} __packed;6302 6303struct wmi_send_singleamsdu_cmd {6304	/* unique id identifying the vdev, generated by the caller */6305	__le32 vdev_id;6306	/* peer mac address */6307	struct wmi_mac_addr peer_macaddr;6308	/* Tid number */6309	__le32 tid;6310} __packed;6311 6312enum wmi_peer_smps_state {6313	WMI_PEER_SMPS_PS_NONE = 0x0,6314	WMI_PEER_SMPS_STATIC  = 0x1,6315	WMI_PEER_SMPS_DYNAMIC = 0x26316};6317 6318enum wmi_peer_chwidth {6319	WMI_PEER_CHWIDTH_20MHZ = 0,6320	WMI_PEER_CHWIDTH_40MHZ = 1,6321	WMI_PEER_CHWIDTH_80MHZ = 2,6322	WMI_PEER_CHWIDTH_160MHZ = 3,6323};6324 6325enum wmi_peer_param {6326	WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */6327	WMI_PEER_AMPDU      = 0x2,6328	WMI_PEER_AUTHORIZE  = 0x3,6329	WMI_PEER_CHAN_WIDTH = 0x4,6330	WMI_PEER_NSS        = 0x5,6331	WMI_PEER_USE_4ADDR  = 0x6,6332	WMI_PEER_USE_FIXED_PWR = 0x8,6333	WMI_PEER_PARAM_FIXED_RATE = 0x9,6334	WMI_PEER_DEBUG      = 0xa,6335	WMI_PEER_PHYMODE    = 0xd,6336	WMI_PEER_DUMMY_VAR  = 0xff, /* dummy parameter for STA PS workaround */6337};6338 6339struct wmi_peer_set_param_cmd {6340	__le32 vdev_id;6341	struct wmi_mac_addr peer_macaddr;6342	__le32 param_id;6343	__le32 param_value;6344} __packed;6345 6346#define MAX_SUPPORTED_RATES 1286347 6348struct wmi_rate_set {6349	/* total number of rates */6350	__le32 num_rates;6351	/*6352	 * rates (each 8bit value) packed into a 32 bit word.6353	 * the rates are filled from least significant byte to most6354	 * significant byte.6355	 */6356	__le32 rates[(MAX_SUPPORTED_RATES / 4) + 1];6357} __packed;6358 6359struct wmi_rate_set_arg {6360	unsigned int num_rates;6361	u8 rates[MAX_SUPPORTED_RATES];6362};6363 6364/*6365 * NOTE: It would bea good idea to represent the Tx MCS6366 * info in one word and Rx in another word. This is split6367 * into multiple words for convenience6368 */6369struct wmi_vht_rate_set {6370	__le32 rx_max_rate; /* Max Rx data rate */6371	__le32 rx_mcs_set;  /* Negotiated RX VHT rates */6372	__le32 tx_max_rate; /* Max Tx data rate */6373	__le32 tx_mcs_set;  /* Negotiated TX VHT rates */6374} __packed;6375 6376struct wmi_vht_rate_set_arg {6377	u32 rx_max_rate;6378	u32 rx_mcs_set;6379	u32 tx_max_rate;6380	u32 tx_mcs_set;6381};6382 6383struct wmi_peer_set_rates_cmd {6384	/* peer MAC address */6385	struct wmi_mac_addr peer_macaddr;6386	/* legacy rate set */6387	struct wmi_rate_set peer_legacy_rates;6388	/* ht rate set */6389	struct wmi_rate_set peer_ht_rates;6390} __packed;6391 6392struct wmi_peer_set_q_empty_callback_cmd {6393	/* unique id identifying the VDEV, generated by the caller */6394	__le32 vdev_id;6395	/* peer MAC address */6396	struct wmi_mac_addr peer_macaddr;6397	__le32 callback_enable;6398} __packed;6399 6400struct wmi_peer_flags_map {6401	u32 auth;6402	u32 qos;6403	u32 need_ptk_4_way;6404	u32 need_gtk_2_way;6405	u32 apsd;6406	u32 ht;6407	u32 bw40;6408	u32 stbc;6409	u32 ldbc;6410	u32 dyn_mimops;6411	u32 static_mimops;6412	u32 spatial_mux;6413	u32 vht;6414	u32 bw80;6415	u32 vht_2g;6416	u32 pmf;6417	u32 bw160;6418};6419 6420enum wmi_peer_flags {6421	WMI_PEER_AUTH = 0x00000001,6422	WMI_PEER_QOS = 0x00000002,6423	WMI_PEER_NEED_PTK_4_WAY = 0x00000004,6424	WMI_PEER_NEED_GTK_2_WAY = 0x00000010,6425	WMI_PEER_APSD = 0x00000800,6426	WMI_PEER_HT = 0x00001000,6427	WMI_PEER_40MHZ = 0x00002000,6428	WMI_PEER_STBC = 0x00008000,6429	WMI_PEER_LDPC = 0x00010000,6430	WMI_PEER_DYN_MIMOPS = 0x00020000,6431	WMI_PEER_STATIC_MIMOPS = 0x00040000,6432	WMI_PEER_SPATIAL_MUX = 0x00200000,6433	WMI_PEER_VHT = 0x02000000,6434	WMI_PEER_80MHZ = 0x04000000,6435	WMI_PEER_VHT_2G = 0x08000000,6436	WMI_PEER_PMF = 0x10000000,6437	WMI_PEER_160MHZ = 0x200000006438};6439 6440enum wmi_10x_peer_flags {6441	WMI_10X_PEER_AUTH = 0x00000001,6442	WMI_10X_PEER_QOS = 0x00000002,6443	WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,6444	WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,6445	WMI_10X_PEER_APSD = 0x00000800,6446	WMI_10X_PEER_HT = 0x00001000,6447	WMI_10X_PEER_40MHZ = 0x00002000,6448	WMI_10X_PEER_STBC = 0x00008000,6449	WMI_10X_PEER_LDPC = 0x00010000,6450	WMI_10X_PEER_DYN_MIMOPS = 0x00020000,6451	WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,6452	WMI_10X_PEER_SPATIAL_MUX = 0x00200000,6453	WMI_10X_PEER_VHT = 0x02000000,6454	WMI_10X_PEER_80MHZ = 0x04000000,6455	WMI_10X_PEER_160MHZ = 0x200000006456};6457 6458enum wmi_10_2_peer_flags {6459	WMI_10_2_PEER_AUTH = 0x00000001,6460	WMI_10_2_PEER_QOS = 0x00000002,6461	WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,6462	WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,6463	WMI_10_2_PEER_APSD = 0x00000800,6464	WMI_10_2_PEER_HT = 0x00001000,6465	WMI_10_2_PEER_40MHZ = 0x00002000,6466	WMI_10_2_PEER_STBC = 0x00008000,6467	WMI_10_2_PEER_LDPC = 0x00010000,6468	WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,6469	WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,6470	WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,6471	WMI_10_2_PEER_VHT = 0x02000000,6472	WMI_10_2_PEER_80MHZ = 0x04000000,6473	WMI_10_2_PEER_VHT_2G = 0x08000000,6474	WMI_10_2_PEER_PMF = 0x10000000,6475	WMI_10_2_PEER_160MHZ = 0x200000006476};6477 6478/*6479 * Peer rate capabilities.6480 *6481 * This is of interest to the ratecontrol6482 * module which resides in the firmware. The bit definitions are6483 * consistent with that defined in if_athrate.c.6484 */6485#define WMI_RC_DS_FLAG          0x016486#define WMI_RC_CW40_FLAG        0x026487#define WMI_RC_SGI_FLAG         0x046488#define WMI_RC_HT_FLAG          0x086489#define WMI_RC_RTSCTS_FLAG      0x106490#define WMI_RC_TX_STBC_FLAG     0x206491#define WMI_RC_RX_STBC_FLAG     0xC06492#define WMI_RC_RX_STBC_FLAG_S   66493#define WMI_RC_WEP_TKIP_FLAG    0x1006494#define WMI_RC_TS_FLAG          0x2006495#define WMI_RC_UAPSD_FLAG       0x4006496 6497/* Maximum listen interval supported by hw in units of beacon interval */6498#define ATH10K_MAX_HW_LISTEN_INTERVAL 56499 6500struct wmi_common_peer_assoc_complete_cmd {6501	struct wmi_mac_addr peer_macaddr;6502	__le32 vdev_id;6503	__le32 peer_new_assoc; /* 1=assoc, 0=reassoc */6504	__le32 peer_associd; /* 16 LSBs */6505	__le32 peer_flags;6506	__le32 peer_caps; /* 16 LSBs */6507	__le32 peer_listen_intval;6508	__le32 peer_ht_caps;6509	__le32 peer_max_mpdu;6510	__le32 peer_mpdu_density; /* 0..16 */6511	__le32 peer_rate_caps;6512	struct wmi_rate_set peer_legacy_rates;6513	struct wmi_rate_set peer_ht_rates;6514	__le32 peer_nss; /* num of spatial streams */6515	__le32 peer_vht_caps;6516	__le32 peer_phymode;6517	struct wmi_vht_rate_set peer_vht_rates;6518};6519 6520struct wmi_main_peer_assoc_complete_cmd {6521	struct wmi_common_peer_assoc_complete_cmd cmd;6522 6523	/* HT Operation Element of the peer. Five bytes packed in 26524	 *  INT32 array and filled from lsb to msb.6525	 */6526	__le32 peer_ht_info[2];6527} __packed;6528 6529struct wmi_10_1_peer_assoc_complete_cmd {6530	struct wmi_common_peer_assoc_complete_cmd cmd;6531} __packed;6532 6533#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 06534#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f6535#define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 46536#define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf06537 6538struct wmi_10_2_peer_assoc_complete_cmd {6539	struct wmi_common_peer_assoc_complete_cmd cmd;6540	__le32 info0; /* WMI_PEER_ASSOC_INFO0_ */6541} __packed;6542 6543/* NSS Mapping to FW */6544#define WMI_PEER_NSS_MAP_ENABLE	BIT(31)6545#define WMI_PEER_NSS_160MHZ_MASK	GENMASK(2, 0)6546#define WMI_PEER_NSS_80_80MHZ_MASK	GENMASK(5, 3)6547 6548struct wmi_10_4_peer_assoc_complete_cmd {6549	struct wmi_10_2_peer_assoc_complete_cmd cmd;6550	__le32 peer_bw_rxnss_override;6551} __packed;6552 6553struct wmi_peer_assoc_complete_arg {6554	u8 addr[ETH_ALEN];6555	u32 vdev_id;6556	bool peer_reassoc;6557	u16 peer_aid;6558	u32 peer_flags; /* see %WMI_PEER_ */6559	u16 peer_caps;6560	u32 peer_listen_intval;6561	u32 peer_ht_caps;6562	u32 peer_max_mpdu;6563	u32 peer_mpdu_density; /* 0..16 */6564	u32 peer_rate_caps; /* see %WMI_RC_ */6565	struct wmi_rate_set_arg peer_legacy_rates;6566	struct wmi_rate_set_arg peer_ht_rates;6567	u32 peer_num_spatial_streams;6568	u32 peer_vht_caps;6569	enum wmi_phy_mode peer_phymode;6570	struct wmi_vht_rate_set_arg peer_vht_rates;6571	u32 peer_bw_rxnss_override;6572};6573 6574struct wmi_peer_add_wds_entry_cmd {6575	/* peer MAC address */6576	struct wmi_mac_addr peer_macaddr;6577	/* wds MAC addr */6578	struct wmi_mac_addr wds_macaddr;6579} __packed;6580 6581struct wmi_peer_remove_wds_entry_cmd {6582	/* wds MAC addr */6583	struct wmi_mac_addr wds_macaddr;6584} __packed;6585 6586struct wmi_peer_q_empty_callback_event {6587	/* peer MAC address */6588	struct wmi_mac_addr peer_macaddr;6589} __packed;6590 6591/*6592 * Channel info WMI event6593 */6594struct wmi_chan_info_event {6595	__le32 err_code;6596	__le32 freq;6597	__le32 cmd_flags;6598	__le32 noise_floor;6599	__le32 rx_clear_count;6600	__le32 cycle_count;6601} __packed;6602 6603struct wmi_10_4_chan_info_event {6604	__le32 err_code;6605	__le32 freq;6606	__le32 cmd_flags;6607	__le32 noise_floor;6608	__le32 rx_clear_count;6609	__le32 cycle_count;6610	__le32 chan_tx_pwr_range;6611	__le32 chan_tx_pwr_tp;6612	__le32 rx_frame_count;6613} __packed;6614 6615struct wmi_peer_sta_kickout_event {6616	struct wmi_mac_addr peer_macaddr;6617} __packed;6618 6619#define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)6620#define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)6621 6622/* Beacon filter wmi command info */6623#define BCN_FLT_MAX_SUPPORTED_IES	2566624#define BCN_FLT_MAX_ELEMS_IE_LIST	(BCN_FLT_MAX_SUPPORTED_IES / 32)6625 6626struct bss_bcn_stats {6627	__le32 vdev_id;6628	__le32 bss_bcnsdropped;6629	__le32 bss_bcnsdelivered;6630} __packed;6631 6632struct bcn_filter_stats {6633	__le32 bcns_dropped;6634	__le32 bcns_delivered;6635	__le32 activefilters;6636	struct bss_bcn_stats bss_stats;6637} __packed;6638 6639struct wmi_add_bcn_filter_cmd {6640	u32 vdev_id;6641	u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];6642} __packed;6643 6644enum wmi_sta_keepalive_method {6645	WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,6646	WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,6647};6648 6649#define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 06650 6651/* Firmware crashes if keepalive interval exceeds this limit */6652#define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff6653 6654/* note: ip4 addresses are in network byte order, i.e. big endian */6655struct wmi_sta_keepalive_arp_resp {6656	__be32 src_ip4_addr;6657	__be32 dest_ip4_addr;6658	struct wmi_mac_addr dest_mac_addr;6659} __packed;6660 6661struct wmi_sta_keepalive_cmd {6662	__le32 vdev_id;6663	__le32 enabled;6664	__le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */6665	__le32 interval; /* in seconds */6666	struct wmi_sta_keepalive_arp_resp arp_resp;6667} __packed;6668 6669struct wmi_sta_keepalive_arg {6670	u32 vdev_id;6671	u32 enabled;6672	u32 method;6673	u32 interval;6674	__be32 src_ip4_addr;6675	__be32 dest_ip4_addr;6676	const u8 dest_mac_addr[ETH_ALEN];6677};6678 6679enum wmi_force_fw_hang_type {6680	WMI_FORCE_FW_HANG_ASSERT = 1,6681	WMI_FORCE_FW_HANG_NO_DETECT,6682	WMI_FORCE_FW_HANG_CTRL_EP_FULL,6683	WMI_FORCE_FW_HANG_EMPTY_POINT,6684	WMI_FORCE_FW_HANG_STACK_OVERFLOW,6685	WMI_FORCE_FW_HANG_INFINITE_LOOP,6686};6687 6688#define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF6689 6690struct wmi_force_fw_hang_cmd {6691	__le32 type;6692	__le32 delay_ms;6693} __packed;6694 6695enum wmi_pdev_reset_mode_type {6696	WMI_RST_MODE_TX_FLUSH = 1,6697	WMI_RST_MODE_WARM_RESET,6698	WMI_RST_MODE_COLD_RESET,6699	WMI_RST_MODE_WARM_RESET_RESTORE_CAL,6700	WMI_RST_MODE_COLD_RESET_RESTORE_CAL,6701	WMI_RST_MODE_MAX,6702};6703 6704enum ath10k_dbglog_level {6705	ATH10K_DBGLOG_LEVEL_VERBOSE = 0,6706	ATH10K_DBGLOG_LEVEL_INFO = 1,6707	ATH10K_DBGLOG_LEVEL_WARN = 2,6708	ATH10K_DBGLOG_LEVEL_ERR = 3,6709};6710 6711/* VAP ids to enable dbglog */6712#define ATH10K_DBGLOG_CFG_VAP_LOG_LSB		06713#define ATH10K_DBGLOG_CFG_VAP_LOG_MASK		0x0000ffff6714 6715/* to enable dbglog in the firmware */6716#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB	166717#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK	0x000100006718 6719/* timestamp resolution */6720#define ATH10K_DBGLOG_CFG_RESOLUTION_LSB	176721#define ATH10K_DBGLOG_CFG_RESOLUTION_MASK	0x000E00006722 6723/* number of queued messages before sending them to the host */6724#define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB	206725#define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK	0x0ff000006726 6727/*6728 * Log levels to enable. This defines the minimum level to enable, this is6729 * not a bitmask. See enum ath10k_dbglog_level for the values.6730 */6731#define ATH10K_DBGLOG_CFG_LOG_LVL_LSB		286732#define ATH10K_DBGLOG_CFG_LOG_LVL_MASK		0x700000006733 6734/*6735 * Note: this is a cleaned up version of a struct firmware uses. For6736 * example, config_valid was hidden inside an array.6737 */6738struct wmi_dbglog_cfg_cmd {6739	/* bitmask to hold mod id config*/6740	__le32 module_enable;6741 6742	/* see ATH10K_DBGLOG_CFG_ */6743	__le32 config_enable;6744 6745	/* mask of module id bits to be changed */6746	__le32 module_valid;6747 6748	/* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */6749	__le32 config_valid;6750} __packed;6751 6752struct wmi_10_4_dbglog_cfg_cmd {6753	/* bitmask to hold mod id config*/6754	__le64 module_enable;6755 6756	/* see ATH10K_DBGLOG_CFG_ */6757	__le32 config_enable;6758 6759	/* mask of module id bits to be changed */6760	__le64 module_valid;6761 6762	/* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */6763	__le32 config_valid;6764} __packed;6765 6766enum wmi_roam_reason {6767	WMI_ROAM_REASON_BETTER_AP = 1,6768	WMI_ROAM_REASON_BEACON_MISS = 2,6769	WMI_ROAM_REASON_LOW_RSSI = 3,6770	WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,6771	WMI_ROAM_REASON_HO_FAILED = 5,6772 6773	/* keep last */6774	WMI_ROAM_REASON_MAX,6775};6776 6777struct wmi_roam_ev {6778	__le32 vdev_id;6779	__le32 reason;6780} __packed;6781 6782#define ATH10K_FRAGMT_THRESHOLD_MIN	5406783#define ATH10K_FRAGMT_THRESHOLD_MAX	23466784 6785#define WMI_MAX_EVENT 0x10006786/* Maximum number of pending TXed WMI packets */6787#define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)6788 6789/* By default disable power save for IBSS */6790#define ATH10K_DEFAULT_ATIM 06791 6792#define WMI_MAX_MEM_REQS 166793 6794struct wmi_scan_ev_arg {6795	__le32 event_type; /* %WMI_SCAN_EVENT_ */6796	__le32 reason; /* %WMI_SCAN_REASON_ */6797	__le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */6798	__le32 scan_req_id;6799	__le32 scan_id;6800	__le32 vdev_id;6801};6802 6803struct mgmt_tx_compl_params {6804	u32 desc_id;6805	u32 status;6806	u32 ppdu_id;6807	int ack_rssi;6808};6809 6810struct wmi_tlv_mgmt_tx_compl_ev_arg {6811	__le32 desc_id;6812	__le32 status;6813	__le32 pdev_id;6814	__le32 ppdu_id;6815	__le32 ack_rssi;6816};6817 6818struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg {6819	__le32 num_reports;6820	const __le32 *desc_ids;6821	const __le32 *status;6822	const __le32 *ppdu_ids;6823	const __le32 *ack_rssi;6824};6825 6826struct wmi_peer_delete_resp_ev_arg {6827	__le32 vdev_id;6828	struct wmi_mac_addr peer_addr;6829};6830 6831#define WMI_MGMT_RX_NUM_RSSI 46832struct wmi_mgmt_rx_ev_arg {6833	__le32 channel;6834	__le32 snr;6835	__le32 rate;6836	__le32 phy_mode;6837	__le32 buf_len;6838	__le32 status; /* %WMI_RX_STATUS_ */6839	struct wmi_mgmt_rx_ext_info ext_info;6840	__le32 rssi[WMI_MGMT_RX_NUM_RSSI];6841};6842 6843struct wmi_ch_info_ev_arg {6844	__le32 err_code;6845	__le32 freq;6846	__le32 cmd_flags;6847	__le32 noise_floor;6848	__le32 rx_clear_count;6849	__le32 cycle_count;6850	__le32 chan_tx_pwr_range;6851	__le32 chan_tx_pwr_tp;6852	__le32 rx_frame_count;6853	__le32 my_bss_rx_cycle_count;6854	__le32 rx_11b_mode_data_duration;6855	__le32 tx_frame_cnt;6856	__le32 mac_clk_mhz;6857};6858 6859/* From 10.4 firmware, not sure all have the same values. */6860enum wmi_vdev_start_status {6861	WMI_VDEV_START_OK = 0,6862	WMI_VDEV_START_CHAN_INVALID,6863};6864 6865struct wmi_vdev_start_ev_arg {6866	__le32 vdev_id;6867	__le32 req_id;6868	__le32 resp_type; /* %WMI_VDEV_RESP_ */6869	__le32 status; /* See wmi_vdev_start_status enum above */6870};6871 6872struct wmi_peer_kick_ev_arg {6873	const u8 *mac_addr;6874};6875 6876struct wmi_swba_ev_arg {6877	__le32 vdev_map;6878	struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];6879	const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];6880};6881 6882struct wmi_phyerr_ev_arg {6883	u32 tsf_timestamp;6884	u16 freq1;6885	u16 freq2;6886	u8 rssi_combined;6887	u8 chan_width_mhz;6888	u8 phy_err_code;6889	u16 nf_chains[4];6890	u32 buf_len;6891	const u8 *buf;6892	u8 hdr_len;6893};6894 6895struct wmi_phyerr_hdr_arg {6896	u32 num_phyerrs;6897	u32 tsf_l32;6898	u32 tsf_u32;6899	u32 buf_len;6900	const void *phyerrs;6901};6902 6903struct wmi_dfs_status_ev_arg {6904	u32 status;6905};6906 6907struct wmi_svc_rdy_ev_arg {6908	__le32 min_tx_power;6909	__le32 max_tx_power;6910	__le32 ht_cap;6911	__le32 vht_cap;6912	__le32 vht_supp_mcs;6913	__le32 sw_ver0;6914	__le32 sw_ver1;6915	__le32 fw_build;6916	__le32 phy_capab;6917	__le32 num_rf_chains;6918	__le32 eeprom_rd;6919	__le32 num_mem_reqs;6920	__le32 low_2ghz_chan;6921	__le32 high_2ghz_chan;6922	__le32 low_5ghz_chan;6923	__le32 high_5ghz_chan;6924	__le32 sys_cap_info;6925	const __le32 *service_map;6926	size_t service_map_len;6927	const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];6928};6929 6930struct wmi_svc_avail_ev_arg {6931	bool service_map_ext_valid;6932	__le32 service_map_ext_len;6933	const __le32 *service_map_ext;6934};6935 6936struct wmi_rdy_ev_arg {6937	__le32 sw_version;6938	__le32 abi_version;6939	__le32 status;6940	const u8 *mac_addr;6941};6942 6943struct wmi_roam_ev_arg {6944	__le32 vdev_id;6945	__le32 reason;6946	__le32 rssi;6947};6948 6949struct wmi_echo_ev_arg {6950	__le32 value;6951};6952 6953struct wmi_pdev_temperature_event {6954	/* temperature value in Celsius degree */6955	__le32 temperature;6956} __packed;6957 6958struct wmi_pdev_bss_chan_info_event {6959	__le32 freq;6960	__le32 noise_floor;6961	__le64 cycle_busy;6962	__le64 cycle_total;6963	__le64 cycle_tx;6964	__le64 cycle_rx;6965	__le64 cycle_rx_bss;6966	__le32 reserved;6967} __packed;6968 6969/* WOW structures */6970enum wmi_wow_wakeup_event {6971	WOW_BMISS_EVENT = 0,6972	WOW_BETTER_AP_EVENT,6973	WOW_DEAUTH_RECVD_EVENT,6974	WOW_MAGIC_PKT_RECVD_EVENT,6975	WOW_GTK_ERR_EVENT,6976	WOW_FOURWAY_HSHAKE_EVENT,6977	WOW_EAPOL_RECVD_EVENT,6978	WOW_NLO_DETECTED_EVENT,6979	WOW_DISASSOC_RECVD_EVENT,6980	WOW_PATTERN_MATCH_EVENT,6981	WOW_CSA_IE_EVENT,6982	WOW_PROBE_REQ_WPS_IE_EVENT,6983	WOW_AUTH_REQ_EVENT,6984	WOW_ASSOC_REQ_EVENT,6985	WOW_HTT_EVENT,6986	WOW_RA_MATCH_EVENT,6987	WOW_HOST_AUTO_SHUTDOWN_EVENT,6988	WOW_IOAC_MAGIC_EVENT,6989	WOW_IOAC_SHORT_EVENT,6990	WOW_IOAC_EXTEND_EVENT,6991	WOW_IOAC_TIMER_EVENT,6992	WOW_DFS_PHYERR_RADAR_EVENT,6993	WOW_BEACON_EVENT,6994	WOW_CLIENT_KICKOUT_EVENT,6995	WOW_EVENT_MAX,6996};6997 6998#define C2S(x) case x: return #x6999 7000static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)7001{7002	switch (ev) {7003	C2S(WOW_BMISS_EVENT);7004	C2S(WOW_BETTER_AP_EVENT);7005	C2S(WOW_DEAUTH_RECVD_EVENT);7006	C2S(WOW_MAGIC_PKT_RECVD_EVENT);7007	C2S(WOW_GTK_ERR_EVENT);7008	C2S(WOW_FOURWAY_HSHAKE_EVENT);7009	C2S(WOW_EAPOL_RECVD_EVENT);7010	C2S(WOW_NLO_DETECTED_EVENT);7011	C2S(WOW_DISASSOC_RECVD_EVENT);7012	C2S(WOW_PATTERN_MATCH_EVENT);7013	C2S(WOW_CSA_IE_EVENT);7014	C2S(WOW_PROBE_REQ_WPS_IE_EVENT);7015	C2S(WOW_AUTH_REQ_EVENT);7016	C2S(WOW_ASSOC_REQ_EVENT);7017	C2S(WOW_HTT_EVENT);7018	C2S(WOW_RA_MATCH_EVENT);7019	C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);7020	C2S(WOW_IOAC_MAGIC_EVENT);7021	C2S(WOW_IOAC_SHORT_EVENT);7022	C2S(WOW_IOAC_EXTEND_EVENT);7023	C2S(WOW_IOAC_TIMER_EVENT);7024	C2S(WOW_DFS_PHYERR_RADAR_EVENT);7025	C2S(WOW_BEACON_EVENT);7026	C2S(WOW_CLIENT_KICKOUT_EVENT);7027	C2S(WOW_EVENT_MAX);7028	default:7029		return NULL;7030	}7031}7032 7033enum wmi_wow_wake_reason {7034	WOW_REASON_UNSPECIFIED = -1,7035	WOW_REASON_NLOD = 0,7036	WOW_REASON_AP_ASSOC_LOST,7037	WOW_REASON_LOW_RSSI,7038	WOW_REASON_DEAUTH_RECVD,7039	WOW_REASON_DISASSOC_RECVD,7040	WOW_REASON_GTK_HS_ERR,7041	WOW_REASON_EAP_REQ,7042	WOW_REASON_FOURWAY_HS_RECV,7043	WOW_REASON_TIMER_INTR_RECV,7044	WOW_REASON_PATTERN_MATCH_FOUND,7045	WOW_REASON_RECV_MAGIC_PATTERN,7046	WOW_REASON_P2P_DISC,7047	WOW_REASON_WLAN_HB,7048	WOW_REASON_CSA_EVENT,7049	WOW_REASON_PROBE_REQ_WPS_IE_RECV,7050	WOW_REASON_AUTH_REQ_RECV,7051	WOW_REASON_ASSOC_REQ_RECV,7052	WOW_REASON_HTT_EVENT,7053	WOW_REASON_RA_MATCH,7054	WOW_REASON_HOST_AUTO_SHUTDOWN,7055	WOW_REASON_IOAC_MAGIC_EVENT,7056	WOW_REASON_IOAC_SHORT_EVENT,7057	WOW_REASON_IOAC_EXTEND_EVENT,7058	WOW_REASON_IOAC_TIMER_EVENT,7059	WOW_REASON_ROAM_HO,7060	WOW_REASON_DFS_PHYERR_RADADR_EVENT,7061	WOW_REASON_BEACON_RECV,7062	WOW_REASON_CLIENT_KICKOUT_EVENT,7063	WOW_REASON_DEBUG_TEST = 0xFF,7064};7065 7066static inline const char *wow_reason(enum wmi_wow_wake_reason reason)7067{7068	switch (reason) {7069	C2S(WOW_REASON_UNSPECIFIED);7070	C2S(WOW_REASON_NLOD);7071	C2S(WOW_REASON_AP_ASSOC_LOST);7072	C2S(WOW_REASON_LOW_RSSI);7073	C2S(WOW_REASON_DEAUTH_RECVD);7074	C2S(WOW_REASON_DISASSOC_RECVD);7075	C2S(WOW_REASON_GTK_HS_ERR);7076	C2S(WOW_REASON_EAP_REQ);7077	C2S(WOW_REASON_FOURWAY_HS_RECV);7078	C2S(WOW_REASON_TIMER_INTR_RECV);7079	C2S(WOW_REASON_PATTERN_MATCH_FOUND);7080	C2S(WOW_REASON_RECV_MAGIC_PATTERN);7081	C2S(WOW_REASON_P2P_DISC);7082	C2S(WOW_REASON_WLAN_HB);7083	C2S(WOW_REASON_CSA_EVENT);7084	C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);7085	C2S(WOW_REASON_AUTH_REQ_RECV);7086	C2S(WOW_REASON_ASSOC_REQ_RECV);7087	C2S(WOW_REASON_HTT_EVENT);7088	C2S(WOW_REASON_RA_MATCH);7089	C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);7090	C2S(WOW_REASON_IOAC_MAGIC_EVENT);7091	C2S(WOW_REASON_IOAC_SHORT_EVENT);7092	C2S(WOW_REASON_IOAC_EXTEND_EVENT);7093	C2S(WOW_REASON_IOAC_TIMER_EVENT);7094	C2S(WOW_REASON_ROAM_HO);7095	C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);7096	C2S(WOW_REASON_BEACON_RECV);7097	C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);7098	C2S(WOW_REASON_DEBUG_TEST);7099	default:7100		return NULL;7101	}7102}7103 7104#undef C2S7105 7106struct wmi_wow_ev_arg {7107	u32 vdev_id;7108	u32 flag;7109	enum wmi_wow_wake_reason wake_reason;7110	u32 data_len;7111};7112 7113#define WOW_MIN_PATTERN_SIZE	17114#define WOW_MAX_PATTERN_SIZE	1487115#define WOW_MAX_PKT_OFFSET	1287116#define WOW_HDR_LEN	(sizeof(struct ieee80211_hdr_3addr) + \7117	sizeof(struct rfc1042_hdr))7118#define WOW_MAX_REDUCE	(WOW_HDR_LEN - sizeof(struct ethhdr) - \7119	offsetof(struct ieee80211_hdr_3addr, addr1))7120 7121enum wmi_tdls_state {7122	WMI_TDLS_DISABLE,7123	WMI_TDLS_ENABLE_PASSIVE,7124	WMI_TDLS_ENABLE_ACTIVE,7125	WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,7126};7127 7128enum wmi_tdls_peer_state {7129	WMI_TDLS_PEER_STATE_PEERING,7130	WMI_TDLS_PEER_STATE_CONNECTED,7131	WMI_TDLS_PEER_STATE_TEARDOWN,7132};7133 7134struct wmi_tdls_peer_update_cmd_arg {7135	u32 vdev_id;7136	enum wmi_tdls_peer_state peer_state;7137	u8 addr[ETH_ALEN];7138};7139 7140#define WMI_TDLS_MAX_SUPP_OPER_CLASSES 327141 7142#define WMI_TDLS_PEER_SP_MASK	0x607143#define WMI_TDLS_PEER_SP_LSB	57144 7145enum wmi_tdls_options {7146	WMI_TDLS_OFFCHAN_EN = BIT(0),7147	WMI_TDLS_BUFFER_STA_EN = BIT(1),7148	WMI_TDLS_SLEEP_STA_EN = BIT(2),7149};7150 7151enum {7152	WMI_TDLS_PEER_QOS_AC_VO = BIT(0),7153	WMI_TDLS_PEER_QOS_AC_VI = BIT(1),7154	WMI_TDLS_PEER_QOS_AC_BK = BIT(2),7155	WMI_TDLS_PEER_QOS_AC_BE = BIT(3),7156};7157 7158struct wmi_tdls_peer_capab_arg {7159	u8 peer_uapsd_queues;7160	u8 peer_max_sp;7161	u32 buff_sta_support;7162	u32 off_chan_support;7163	u32 peer_curr_operclass;7164	u32 self_curr_operclass;7165	u32 peer_chan_len;7166	u32 peer_operclass_len;7167	u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];7168	u32 is_peer_responder;7169	u32 pref_offchan_num;7170	u32 pref_offchan_bw;7171};7172 7173struct wmi_10_4_tdls_set_state_cmd {7174	__le32 vdev_id;7175	__le32 state;7176	__le32 notification_interval_ms;7177	__le32 tx_discovery_threshold;7178	__le32 tx_teardown_threshold;7179	__le32 rssi_teardown_threshold;7180	__le32 rssi_delta;7181	__le32 tdls_options;7182	__le32 tdls_peer_traffic_ind_window;7183	__le32 tdls_peer_traffic_response_timeout_ms;7184	__le32 tdls_puapsd_mask;7185	__le32 tdls_puapsd_inactivity_time_ms;7186	__le32 tdls_puapsd_rx_frame_threshold;7187	__le32 teardown_notification_ms;7188	__le32 tdls_peer_kickout_threshold;7189} __packed;7190 7191struct wmi_tdls_peer_capabilities {7192	__le32 peer_qos;7193	__le32 buff_sta_support;7194	__le32 off_chan_support;7195	__le32 peer_curr_operclass;7196	__le32 self_curr_operclass;7197	__le32 peer_chan_len;7198	__le32 peer_operclass_len;7199	u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];7200	__le32 is_peer_responder;7201	__le32 pref_offchan_num;7202	__le32 pref_offchan_bw;7203	union {7204		/* to match legacy implementation allocate room for7205		 * at least one record even if peer_chan_len is 07206		 */7207		struct wmi_channel peer_chan_min_allocation;7208		DECLARE_FLEX_ARRAY(struct wmi_channel, peer_chan_list);7209	};7210} __packed;7211 7212struct wmi_10_4_tdls_peer_update_cmd {7213	__le32 vdev_id;7214	struct wmi_mac_addr peer_macaddr;7215	__le32 peer_state;7216	__le32 reserved[4];7217	struct wmi_tdls_peer_capabilities peer_capab;7218} __packed;7219 7220enum wmi_tdls_peer_reason {7221	WMI_TDLS_TEARDOWN_REASON_TX,7222	WMI_TDLS_TEARDOWN_REASON_RSSI,7223	WMI_TDLS_TEARDOWN_REASON_SCAN,7224	WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE,7225	WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT,7226	WMI_TDLS_TEARDOWN_REASON_BAD_PTR,7227	WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE,7228	WMI_TDLS_ENTER_BUF_STA,7229	WMI_TDLS_EXIT_BUF_STA,7230	WMI_TDLS_ENTER_BT_BUSY_MODE,7231	WMI_TDLS_EXIT_BT_BUSY_MODE,7232	WMI_TDLS_SCAN_STARTED_EVENT,7233	WMI_TDLS_SCAN_COMPLETED_EVENT,7234};7235 7236enum wmi_tdls_peer_notification {7237	WMI_TDLS_SHOULD_DISCOVER,7238	WMI_TDLS_SHOULD_TEARDOWN,7239	WMI_TDLS_PEER_DISCONNECTED,7240	WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION,7241};7242 7243struct wmi_tdls_peer_event {7244	struct wmi_mac_addr peer_macaddr;7245	/* see enum wmi_tdls_peer_notification*/7246	__le32 peer_status;7247	/* see enum wmi_tdls_peer_reason */7248	__le32 peer_reason;7249	__le32 vdev_id;7250} __packed;7251 7252enum wmi_tid_aggr_control_conf {7253	WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,7254	WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,7255	WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,7256};7257 7258enum wmi_noack_tid_conf {7259	WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,7260	WMI_PEER_TID_CONFIG_ACK,7261	WMI_PEER_TID_CONFIG_NOACK,7262};7263 7264enum wmi_tid_rate_ctrl_conf {7265	WMI_TID_CONFIG_RATE_CONTROL_IGNORE,7266	WMI_TID_CONFIG_RATE_CONTROL_AUTO,7267	WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,7268	WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,7269	WMI_PEER_TID_CONFIG_RATE_UPPER_CAP,7270};7271 7272enum wmi_tid_rtscts_control_conf {7273	WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE,7274	WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE,7275};7276 7277enum wmi_ext_tid_config_map {7278	WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0),7279};7280 7281struct wmi_per_peer_per_tid_cfg_arg {7282	u32 vdev_id;7283	struct wmi_mac_addr peer_macaddr;7284	u32 tid;7285	enum wmi_noack_tid_conf ack_policy;7286	enum wmi_tid_aggr_control_conf aggr_control;7287	u8 rate_ctrl;7288	u32 retry_count;7289	u32 rcode_flags;7290	u32 ext_tid_cfg_bitmap;7291	u32 rtscts_ctrl;7292};7293 7294struct wmi_peer_per_tid_cfg_cmd {7295	__le32 vdev_id;7296	struct wmi_mac_addr peer_macaddr;7297	__le32 tid;7298 7299	/* see enum wmi_noack_tid_conf */7300	__le32 ack_policy;7301 7302	/* see enum wmi_tid_aggr_control_conf */7303	__le32 aggr_control;7304 7305	/* see enum wmi_tid_rate_ctrl_conf */7306	__le32 rate_control;7307	__le32 rcode_flags;7308	__le32 retry_count;7309 7310	/* See enum wmi_ext_tid_config_map */7311	__le32 ext_tid_cfg_bitmap;7312 7313	/* see enum wmi_tid_rtscts_control_conf */7314	__le32 rtscts_ctrl;7315} __packed;7316 7317enum wmi_txbf_conf {7318	WMI_TXBF_CONF_UNSUPPORTED,7319	WMI_TXBF_CONF_BEFORE_ASSOC,7320	WMI_TXBF_CONF_AFTER_ASSOC,7321};7322 7323#define	WMI_CCA_DETECT_LEVEL_AUTO	07324#define	WMI_CCA_DETECT_MARGIN_AUTO	07325 7326struct wmi_pdev_set_adaptive_cca_params {7327	__le32 enable;7328	__le32 cca_detect_level;7329	__le32 cca_detect_margin;7330} __packed;7331 7332#define WMI_PNO_MAX_SCHED_SCAN_PLANS      27333#define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT   72007334#define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 1007335#define WMI_PNO_MAX_NETW_CHANNELS         267336#define WMI_PNO_MAX_NETW_CHANNELS_EX      607337#define WMI_PNO_MAX_SUPP_NETWORKS         WLAN_SCAN_PARAMS_MAX_SSID7338#define WMI_PNO_MAX_IE_LENGTH             WLAN_SCAN_PARAMS_MAX_IE_LEN7339 7340/*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/7341#define WMI_PNO_MAX_PB_REQ_SIZE    4507342 7343#define WMI_PNO_24G_DEFAULT_CH     17344#define WMI_PNO_5G_DEFAULT_CH      367345 7346#define WMI_ACTIVE_MAX_CHANNEL_TIME 407347#define WMI_PASSIVE_MAX_CHANNEL_TIME   1107348 7349/* SSID broadcast type */7350enum wmi_SSID_bcast_type {7351	BCAST_UNKNOWN      = 0,7352	BCAST_NORMAL       = 1,7353	BCAST_HIDDEN       = 2,7354};7355 7356struct wmi_network_type {7357	struct wmi_ssid ssid;7358	u32 authentication;7359	u32 encryption;7360	u32 bcast_nw_type;7361	u8 channel_count;7362	u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX];7363	s32 rssi_threshold;7364} __packed;7365 7366struct wmi_pno_scan_req {7367	u8 enable;7368	u8 vdev_id;7369	u8 uc_networks_count;7370	struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS];7371	u32 fast_scan_period;7372	u32 slow_scan_period;7373	u8 fast_scan_max_cycles;7374 7375	bool do_passive_scan;7376 7377	u32 delay_start_time;7378	u32 active_min_time;7379	u32 active_max_time;7380	u32 passive_min_time;7381	u32 passive_max_time;7382 7383	/* mac address randomization attributes */7384	u32 enable_pno_scan_randomization;7385	u8 mac_addr[ETH_ALEN];7386	u8 mac_addr_mask[ETH_ALEN];7387} __packed;7388 7389enum wmi_host_platform_type {7390	WMI_HOST_PLATFORM_HIGH_PERF,7391	WMI_HOST_PLATFORM_LOW_PERF,7392};7393 7394enum wmi_bss_survey_req_type {7395	WMI_BSS_SURVEY_REQ_TYPE_READ = 1,7396	WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,7397};7398 7399struct wmi_pdev_chan_info_req_cmd {7400	__le32 type;7401	__le32 reserved;7402} __packed;7403 7404/* bb timing register configurations */7405struct wmi_bb_timing_cfg_arg {7406	/* Tx_end to pa off timing */7407	u32 bb_tx_timing;7408 7409	/* Tx_end to external pa off timing */7410	u32 bb_xpa_timing;7411};7412 7413struct wmi_pdev_bb_timing_cfg_cmd {7414	/* Tx_end to pa off timing */7415	__le32 bb_tx_timing;7416 7417	/* Tx_end to external pa off timing */7418	__le32 bb_xpa_timing;7419} __packed;7420 7421struct ath10k;7422struct ath10k_vif;7423struct ath10k_fw_stats_pdev;7424struct ath10k_fw_stats_peer;7425struct ath10k_fw_stats;7426 7427int ath10k_wmi_attach(struct ath10k *ar);7428void ath10k_wmi_detach(struct ath10k *ar);7429void ath10k_wmi_free_host_mem(struct ath10k *ar);7430int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);7431int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);7432 7433struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);7434int ath10k_wmi_connect(struct ath10k *ar);7435 7436int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);7437int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,7438			       u32 cmd_id);7439void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg);7440 7441void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,7442				     struct ath10k_fw_stats_pdev *dst);7443void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,7444				   struct ath10k_fw_stats_pdev *dst);7445void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,7446				   struct ath10k_fw_stats_pdev *dst);7447void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,7448				      struct ath10k_fw_stats_pdev *dst);7449void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,7450				struct ath10k_fw_stats_peer *dst);7451void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,7452				    struct wmi_host_mem_chunks *chunks);7453void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,7454				      const struct wmi_start_scan_arg *arg);7455void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,7456			      const struct wmi_wmm_params_arg *arg);7457void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,7458				const struct wmi_channel_arg *arg);7459int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);7460 7461int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);7462int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);7463int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb);7464int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb);7465void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);7466void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);7467int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);7468void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);7469void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);7470void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);7471void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);7472void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);7473void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);7474void ath10k_wmi_event_dfs(struct ath10k *ar,7475			  struct wmi_phyerr_ev_arg *phyerr, u64 tsf);7476void ath10k_wmi_event_spectral_scan(struct ath10k *ar,7477				    struct wmi_phyerr_ev_arg *phyerr,7478				    u64 tsf);7479void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);7480void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);7481void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);7482void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);7483void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);7484void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);7485void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,7486					     struct sk_buff *skb);7487void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,7488					     struct sk_buff *skb);7489void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);7490void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);7491void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);7492void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);7493void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);7494void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,7495					 struct sk_buff *skb);7496void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);7497void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);7498void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);7499void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,7500						struct sk_buff *skb);7501void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);7502void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);7503void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);7504void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);7505int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);7506void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb);7507int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,7508				 int left_len, struct wmi_phyerr_ev_arg *arg);7509void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,7510				      struct ath10k_fw_stats *fw_stats,7511				      char *buf);7512void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,7513				     struct ath10k_fw_stats *fw_stats,7514				     char *buf);7515void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,7516				      struct ath10k_fw_stats *fw_stats,7517				      char *buf);7518int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,7519				   enum wmi_vdev_subtype subtype);7520int ath10k_wmi_barrier(struct ath10k *ar);7521void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table,7522					 u32 num_tx_chain);7523void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb);7524 7525#endif /* _WMI_H_ */7526