brintos

brintos / linux-shallow public Read only

0
0
Text · 21.4 KiB · 439d61f Raw
785 lines · c
1// SPDX-License-Identifier: BSD-3-Clause-Clear2/*3 * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.4 * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.5 */6#include <linux/rtnetlink.h>7#include "core.h"8#include "debug.h"9 10/* World regdom to be used in case default regd from fw is unavailable */11#define ATH12K_2GHZ_CH01_11      REG_RULE(2412 - 10, 2462 + 10, 40, 0, 20, 0)12#define ATH12K_5GHZ_5150_5350    REG_RULE(5150 - 10, 5350 + 10, 80, 0, 30,\13					  NL80211_RRF_NO_IR)14#define ATH12K_5GHZ_5725_5850    REG_RULE(5725 - 10, 5850 + 10, 80, 0, 30,\15					  NL80211_RRF_NO_IR)16 17#define ETSI_WEATHER_RADAR_BAND_LOW		559018#define ETSI_WEATHER_RADAR_BAND_HIGH		565019#define ETSI_WEATHER_RADAR_BAND_CAC_TIMEOUT	60000020 21static const struct ieee80211_regdomain ath12k_world_regd = {22	.n_reg_rules = 3,23	.alpha2 = "00",24	.reg_rules = {25		ATH12K_2GHZ_CH01_11,26		ATH12K_5GHZ_5150_5350,27		ATH12K_5GHZ_5725_5850,28	}29};30 31static bool ath12k_regdom_changes(struct ieee80211_hw *hw, char *alpha2)32{33	const struct ieee80211_regdomain *regd;34 35	regd = rcu_dereference_rtnl(hw->wiphy->regd);36	/* This can happen during wiphy registration where the previous37	 * user request is received before we update the regd received38	 * from firmware.39	 */40	if (!regd)41		return true;42 43	return memcmp(regd->alpha2, alpha2, 2) != 0;44}45 46static void47ath12k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)48{49	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);50	struct ath12k_wmi_init_country_arg arg;51	struct ath12k_hw *ah = ath12k_hw_to_ah(hw);52	struct ath12k *ar = ath12k_ah_to_ar(ah, 0);53	int ret, i;54 55	ath12k_dbg(ar->ab, ATH12K_DBG_REG,56		   "Regulatory Notification received for %s\n", wiphy_name(wiphy));57 58	/* Currently supporting only General User Hints. Cell base user59	 * hints to be handled later.60	 * Hints from other sources like Core, Beacons are not expected for61	 * self managed wiphy's62	 */63	if (!(request->initiator == NL80211_REGDOM_SET_BY_USER &&64	      request->user_reg_hint_type == NL80211_USER_REG_HINT_USER)) {65		ath12k_warn(ar->ab, "Unexpected Regulatory event for this wiphy\n");66		return;67	}68 69	if (!IS_ENABLED(CONFIG_ATH_REG_DYNAMIC_USER_REG_HINTS)) {70		ath12k_dbg(ar->ab, ATH12K_DBG_REG,71			   "Country Setting is not allowed\n");72		return;73	}74 75	if (!ath12k_regdom_changes(hw, request->alpha2)) {76		ath12k_dbg(ar->ab, ATH12K_DBG_REG, "Country is already set\n");77		return;78	}79 80	/* Set the country code to the firmware and wait for81	 * the WMI_REG_CHAN_LIST_CC EVENT for updating the82	 * reg info83	 */84	arg.flags = ALPHA_IS_SET;85	memcpy(&arg.cc_info.alpha2, request->alpha2, 2);86	arg.cc_info.alpha2[2] = 0;87 88	/* Allow fresh updates to wiphy regd */89	ah->regd_updated = false;90 91	/* Send the reg change request to all the radios */92	for_each_ar(ah, ar, i) {93		ret = ath12k_wmi_send_init_country_cmd(ar, &arg);94		if (ret)95			ath12k_warn(ar->ab,96				    "INIT Country code set to fw failed : %d\n", ret);97	}98}99 100int ath12k_reg_update_chan_list(struct ath12k *ar)101{102	struct ieee80211_supported_band **bands;103	struct ath12k_wmi_scan_chan_list_arg *arg;104	struct ieee80211_channel *channel;105	struct ieee80211_hw *hw = ath12k_ar_to_hw(ar);106	struct ath12k_wmi_channel_arg *ch;107	enum nl80211_band band;108	int num_channels = 0;109	int i, ret;110 111	bands = hw->wiphy->bands;112	for (band = 0; band < NUM_NL80211_BANDS; band++) {113		if (!(ar->mac.sbands[band].channels && bands[band]))114			continue;115 116		for (i = 0; i < bands[band]->n_channels; i++) {117			if (bands[band]->channels[i].flags &118			    IEEE80211_CHAN_DISABLED)119				continue;120 121			num_channels++;122		}123	}124 125	if (WARN_ON(!num_channels))126		return -EINVAL;127 128	arg = kzalloc(struct_size(arg, channel, num_channels), GFP_KERNEL);129 130	if (!arg)131		return -ENOMEM;132 133	arg->pdev_id = ar->pdev->pdev_id;134	arg->nallchans = num_channels;135 136	ch = arg->channel;137 138	for (band = 0; band < NUM_NL80211_BANDS; band++) {139		if (!(ar->mac.sbands[band].channels && bands[band]))140			continue;141 142		for (i = 0; i < bands[band]->n_channels; i++) {143			channel = &bands[band]->channels[i];144 145			if (channel->flags & IEEE80211_CHAN_DISABLED)146				continue;147 148			/* TODO: Set to true/false based on some condition? */149			ch->allow_ht = true;150			ch->allow_vht = true;151			ch->allow_he = true;152 153			ch->dfs_set =154				!!(channel->flags & IEEE80211_CHAN_RADAR);155			ch->is_chan_passive = !!(channel->flags &156						IEEE80211_CHAN_NO_IR);157			ch->is_chan_passive |= ch->dfs_set;158			ch->mhz = channel->center_freq;159			ch->cfreq1 = channel->center_freq;160			ch->minpower = 0;161			ch->maxpower = channel->max_power * 2;162			ch->maxregpower = channel->max_reg_power * 2;163			ch->antennamax = channel->max_antenna_gain * 2;164 165			/* TODO: Use appropriate phymodes */166			if (channel->band == NL80211_BAND_2GHZ)167				ch->phy_mode = MODE_11G;168			else169				ch->phy_mode = MODE_11A;170 171			if (channel->band == NL80211_BAND_6GHZ &&172			    cfg80211_channel_is_psc(channel))173				ch->psc_channel = true;174 175			ath12k_dbg(ar->ab, ATH12K_DBG_WMI,176				   "mac channel [%d/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",177				   i, arg->nallchans,178				   ch->mhz, ch->maxpower, ch->maxregpower,179				   ch->antennamax, ch->phy_mode);180 181			ch++;182			/* TODO: use quarrter/half rate, cfreq12, dfs_cfreq2183			 * set_agile, reg_class_idx184			 */185		}186	}187 188	ret = ath12k_wmi_send_scan_chan_list_cmd(ar, arg);189	kfree(arg);190 191	return ret;192}193 194static void ath12k_copy_regd(struct ieee80211_regdomain *regd_orig,195			     struct ieee80211_regdomain *regd_copy)196{197	u8 i;198 199	/* The caller should have checked error conditions */200	memcpy(regd_copy, regd_orig, sizeof(*regd_orig));201 202	for (i = 0; i < regd_orig->n_reg_rules; i++)203		memcpy(&regd_copy->reg_rules[i], &regd_orig->reg_rules[i],204		       sizeof(struct ieee80211_reg_rule));205}206 207int ath12k_regd_update(struct ath12k *ar, bool init)208{209	struct ath12k_hw *ah = ath12k_ar_to_ah(ar);210	struct ieee80211_hw *hw = ah->hw;211	struct ieee80211_regdomain *regd, *regd_copy = NULL;212	int ret, regd_len, pdev_id;213	struct ath12k_base *ab;214	int i;215 216	ab = ar->ab;217 218	/* If one of the radios within ah has already updated the regd for219	 * the wiphy, then avoid setting regd again220	 */221	if (ah->regd_updated)222		return 0;223 224	/* firmware provides reg rules which are similar for 2 GHz and 5 GHz225	 * pdev but 6 GHz pdev has superset of all rules including rules for226	 * all bands, we prefer 6 GHz pdev's rules to be used for setup of227	 * the wiphy regd.228	 * If 6 GHz pdev was part of the ath12k_hw, wait for the 6 GHz pdev,229	 * else pick the first pdev which calls this function and use its230	 * regd to update global hw regd.231	 * The regd_updated flag set at the end will not allow any further232	 * updates.233	 */234	if (ah->use_6ghz_regd && !ar->supports_6ghz)235		return 0;236 237	pdev_id = ar->pdev_idx;238 239	spin_lock_bh(&ab->base_lock);240 241	if (init) {242		/* Apply the regd received during init through243		 * WMI_REG_CHAN_LIST_CC event. In case of failure to244		 * receive the regd, initialize with a default world245		 * regulatory.246		 */247		if (ab->default_regd[pdev_id]) {248			regd = ab->default_regd[pdev_id];249		} else {250			ath12k_warn(ab,251				    "failed to receive default regd during init\n");252			regd = (struct ieee80211_regdomain *)&ath12k_world_regd;253		}254	} else {255		regd = ab->new_regd[pdev_id];256	}257 258	if (!regd) {259		ret = -EINVAL;260		spin_unlock_bh(&ab->base_lock);261		goto err;262	}263 264	regd_len = sizeof(*regd) + (regd->n_reg_rules *265		sizeof(struct ieee80211_reg_rule));266 267	regd_copy = kzalloc(regd_len, GFP_ATOMIC);268	if (regd_copy)269		ath12k_copy_regd(regd, regd_copy);270 271	spin_unlock_bh(&ab->base_lock);272 273	if (!regd_copy) {274		ret = -ENOMEM;275		goto err;276	}277 278	rtnl_lock();279	wiphy_lock(hw->wiphy);280	ret = regulatory_set_wiphy_regd_sync(hw->wiphy, regd_copy);281	wiphy_unlock(hw->wiphy);282	rtnl_unlock();283 284	kfree(regd_copy);285 286	if (ret)287		goto err;288 289	if (ah->state != ATH12K_HW_STATE_ON)290		goto skip;291 292	ah->regd_updated = true;293	/* Apply the new regd to all the radios, this is expected to be received only once294	 * since we check for ah->regd_updated and allow here only once.295	 */296	for_each_ar(ah, ar, i) {297		ab = ar->ab;298		ret = ath12k_reg_update_chan_list(ar);299		if (ret)300			goto err;301	}302skip:303	return 0;304err:305	ath12k_warn(ab, "failed to perform regd update : %d\n", ret);306	return ret;307}308 309static enum nl80211_dfs_regions310ath12k_map_fw_dfs_region(enum ath12k_dfs_region dfs_region)311{312	switch (dfs_region) {313	case ATH12K_DFS_REG_FCC:314	case ATH12K_DFS_REG_CN:315		return NL80211_DFS_FCC;316	case ATH12K_DFS_REG_ETSI:317	case ATH12K_DFS_REG_KR:318		return NL80211_DFS_ETSI;319	case ATH12K_DFS_REG_MKK:320	case ATH12K_DFS_REG_MKK_N:321		return NL80211_DFS_JP;322	default:323		return NL80211_DFS_UNSET;324	}325}326 327static u32 ath12k_map_fw_reg_flags(u16 reg_flags)328{329	u32 flags = 0;330 331	if (reg_flags & REGULATORY_CHAN_NO_IR)332		flags = NL80211_RRF_NO_IR;333 334	if (reg_flags & REGULATORY_CHAN_RADAR)335		flags |= NL80211_RRF_DFS;336 337	if (reg_flags & REGULATORY_CHAN_NO_OFDM)338		flags |= NL80211_RRF_NO_OFDM;339 340	if (reg_flags & REGULATORY_CHAN_INDOOR_ONLY)341		flags |= NL80211_RRF_NO_OUTDOOR;342 343	if (reg_flags & REGULATORY_CHAN_NO_HT40)344		flags |= NL80211_RRF_NO_HT40;345 346	if (reg_flags & REGULATORY_CHAN_NO_80MHZ)347		flags |= NL80211_RRF_NO_80MHZ;348 349	if (reg_flags & REGULATORY_CHAN_NO_160MHZ)350		flags |= NL80211_RRF_NO_160MHZ;351 352	return flags;353}354 355static u32 ath12k_map_fw_phy_flags(u32 phy_flags)356{357	u32 flags = 0;358 359	if (phy_flags & ATH12K_REG_PHY_BITMAP_NO11AX)360		flags |= NL80211_RRF_NO_HE;361 362	if (phy_flags & ATH12K_REG_PHY_BITMAP_NO11BE)363		flags |= NL80211_RRF_NO_EHT;364 365	return flags;366}367 368static bool369ath12k_reg_can_intersect(struct ieee80211_reg_rule *rule1,370			 struct ieee80211_reg_rule *rule2)371{372	u32 start_freq1, end_freq1;373	u32 start_freq2, end_freq2;374 375	start_freq1 = rule1->freq_range.start_freq_khz;376	start_freq2 = rule2->freq_range.start_freq_khz;377 378	end_freq1 = rule1->freq_range.end_freq_khz;379	end_freq2 = rule2->freq_range.end_freq_khz;380 381	if ((start_freq1 >= start_freq2 &&382	     start_freq1 < end_freq2) ||383	    (start_freq2 > start_freq1 &&384	     start_freq2 < end_freq1))385		return true;386 387	/* TODO: Should we restrict intersection feasibility388	 *  based on min bandwidth of the intersected region also,389	 *  say the intersected rule should have a  min bandwidth390	 * of 20MHz?391	 */392 393	return false;394}395 396static void ath12k_reg_intersect_rules(struct ieee80211_reg_rule *rule1,397				       struct ieee80211_reg_rule *rule2,398				       struct ieee80211_reg_rule *new_rule)399{400	u32 start_freq1, end_freq1;401	u32 start_freq2, end_freq2;402	u32 freq_diff, max_bw;403 404	start_freq1 = rule1->freq_range.start_freq_khz;405	start_freq2 = rule2->freq_range.start_freq_khz;406 407	end_freq1 = rule1->freq_range.end_freq_khz;408	end_freq2 = rule2->freq_range.end_freq_khz;409 410	new_rule->freq_range.start_freq_khz = max_t(u32, start_freq1,411						    start_freq2);412	new_rule->freq_range.end_freq_khz = min_t(u32, end_freq1, end_freq2);413 414	freq_diff = new_rule->freq_range.end_freq_khz -415			new_rule->freq_range.start_freq_khz;416	max_bw = min_t(u32, rule1->freq_range.max_bandwidth_khz,417		       rule2->freq_range.max_bandwidth_khz);418	new_rule->freq_range.max_bandwidth_khz = min_t(u32, max_bw, freq_diff);419 420	new_rule->power_rule.max_antenna_gain =421		min_t(u32, rule1->power_rule.max_antenna_gain,422		      rule2->power_rule.max_antenna_gain);423 424	new_rule->power_rule.max_eirp = min_t(u32, rule1->power_rule.max_eirp,425					      rule2->power_rule.max_eirp);426 427	/* Use the flags of both the rules */428	new_rule->flags = rule1->flags | rule2->flags;429 430	/* To be safe, lts use the max cac timeout of both rules */431	new_rule->dfs_cac_ms = max_t(u32, rule1->dfs_cac_ms,432				     rule2->dfs_cac_ms);433}434 435static struct ieee80211_regdomain *436ath12k_regd_intersect(struct ieee80211_regdomain *default_regd,437		      struct ieee80211_regdomain *curr_regd)438{439	u8 num_old_regd_rules, num_curr_regd_rules, num_new_regd_rules;440	struct ieee80211_reg_rule *old_rule, *curr_rule, *new_rule;441	struct ieee80211_regdomain *new_regd = NULL;442	u8 i, j, k;443 444	num_old_regd_rules = default_regd->n_reg_rules;445	num_curr_regd_rules = curr_regd->n_reg_rules;446	num_new_regd_rules = 0;447 448	/* Find the number of intersecting rules to allocate new regd memory */449	for (i = 0; i < num_old_regd_rules; i++) {450		old_rule = default_regd->reg_rules + i;451		for (j = 0; j < num_curr_regd_rules; j++) {452			curr_rule = curr_regd->reg_rules + j;453 454			if (ath12k_reg_can_intersect(old_rule, curr_rule))455				num_new_regd_rules++;456		}457	}458 459	if (!num_new_regd_rules)460		return NULL;461 462	new_regd = kzalloc(sizeof(*new_regd) + (num_new_regd_rules *463			sizeof(struct ieee80211_reg_rule)),464			GFP_ATOMIC);465 466	if (!new_regd)467		return NULL;468 469	/* We set the new country and dfs region directly and only trim470	 * the freq, power, antenna gain by intersecting with the471	 * default regdomain. Also MAX of the dfs cac timeout is selected.472	 */473	new_regd->n_reg_rules = num_new_regd_rules;474	memcpy(new_regd->alpha2, curr_regd->alpha2, sizeof(new_regd->alpha2));475	new_regd->dfs_region = curr_regd->dfs_region;476	new_rule = new_regd->reg_rules;477 478	for (i = 0, k = 0; i < num_old_regd_rules; i++) {479		old_rule = default_regd->reg_rules + i;480		for (j = 0; j < num_curr_regd_rules; j++) {481			curr_rule = curr_regd->reg_rules + j;482 483			if (ath12k_reg_can_intersect(old_rule, curr_rule))484				ath12k_reg_intersect_rules(old_rule, curr_rule,485							   (new_rule + k++));486		}487	}488	return new_regd;489}490 491static const char *492ath12k_reg_get_regdom_str(enum nl80211_dfs_regions dfs_region)493{494	switch (dfs_region) {495	case NL80211_DFS_FCC:496		return "FCC";497	case NL80211_DFS_ETSI:498		return "ETSI";499	case NL80211_DFS_JP:500		return "JP";501	default:502		return "UNSET";503	}504}505 506static u16507ath12k_reg_adjust_bw(u16 start_freq, u16 end_freq, u16 max_bw)508{509	u16 bw;510 511	bw = end_freq - start_freq;512	bw = min_t(u16, bw, max_bw);513 514	if (bw >= 80 && bw < 160)515		bw = 80;516	else if (bw >= 40 && bw < 80)517		bw = 40;518	else if (bw < 40)519		bw = 20;520 521	return bw;522}523 524static void525ath12k_reg_update_rule(struct ieee80211_reg_rule *reg_rule, u32 start_freq,526		       u32 end_freq, u32 bw, u32 ant_gain, u32 reg_pwr,527		       u32 reg_flags)528{529	reg_rule->freq_range.start_freq_khz = MHZ_TO_KHZ(start_freq);530	reg_rule->freq_range.end_freq_khz = MHZ_TO_KHZ(end_freq);531	reg_rule->freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw);532	reg_rule->power_rule.max_antenna_gain = DBI_TO_MBI(ant_gain);533	reg_rule->power_rule.max_eirp = DBM_TO_MBM(reg_pwr);534	reg_rule->flags = reg_flags;535}536 537static void538ath12k_reg_update_weather_radar_band(struct ath12k_base *ab,539				     struct ieee80211_regdomain *regd,540				     struct ath12k_reg_rule *reg_rule,541				     u8 *rule_idx, u32 flags, u16 max_bw)542{543	u32 end_freq;544	u16 bw;545	u8 i;546 547	i = *rule_idx;548 549	bw = ath12k_reg_adjust_bw(reg_rule->start_freq,550				  ETSI_WEATHER_RADAR_BAND_LOW, max_bw);551 552	ath12k_reg_update_rule(regd->reg_rules + i, reg_rule->start_freq,553			       ETSI_WEATHER_RADAR_BAND_LOW, bw,554			       reg_rule->ant_gain, reg_rule->reg_power,555			       flags);556 557	ath12k_dbg(ab, ATH12K_DBG_REG,558		   "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",559		   i + 1, reg_rule->start_freq, ETSI_WEATHER_RADAR_BAND_LOW,560		   bw, reg_rule->ant_gain, reg_rule->reg_power,561		   regd->reg_rules[i].dfs_cac_ms,562		   flags);563 564	if (reg_rule->end_freq > ETSI_WEATHER_RADAR_BAND_HIGH)565		end_freq = ETSI_WEATHER_RADAR_BAND_HIGH;566	else567		end_freq = reg_rule->end_freq;568 569	bw = ath12k_reg_adjust_bw(ETSI_WEATHER_RADAR_BAND_LOW, end_freq,570				  max_bw);571 572	i++;573 574	ath12k_reg_update_rule(regd->reg_rules + i,575			       ETSI_WEATHER_RADAR_BAND_LOW, end_freq, bw,576			       reg_rule->ant_gain, reg_rule->reg_power,577			       flags);578 579	regd->reg_rules[i].dfs_cac_ms = ETSI_WEATHER_RADAR_BAND_CAC_TIMEOUT;580 581	ath12k_dbg(ab, ATH12K_DBG_REG,582		   "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",583		   i + 1, ETSI_WEATHER_RADAR_BAND_LOW, end_freq,584		   bw, reg_rule->ant_gain, reg_rule->reg_power,585		   regd->reg_rules[i].dfs_cac_ms,586		   flags);587 588	if (end_freq == reg_rule->end_freq) {589		regd->n_reg_rules--;590		*rule_idx = i;591		return;592	}593 594	bw = ath12k_reg_adjust_bw(ETSI_WEATHER_RADAR_BAND_HIGH,595				  reg_rule->end_freq, max_bw);596 597	i++;598 599	ath12k_reg_update_rule(regd->reg_rules + i, ETSI_WEATHER_RADAR_BAND_HIGH,600			       reg_rule->end_freq, bw,601			       reg_rule->ant_gain, reg_rule->reg_power,602			       flags);603 604	ath12k_dbg(ab, ATH12K_DBG_REG,605		   "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",606		   i + 1, ETSI_WEATHER_RADAR_BAND_HIGH, reg_rule->end_freq,607		   bw, reg_rule->ant_gain, reg_rule->reg_power,608		   regd->reg_rules[i].dfs_cac_ms,609		   flags);610 611	*rule_idx = i;612}613 614struct ieee80211_regdomain *615ath12k_reg_build_regd(struct ath12k_base *ab,616		      struct ath12k_reg_info *reg_info, bool intersect)617{618	struct ieee80211_regdomain *tmp_regd, *default_regd, *new_regd = NULL;619	struct ath12k_reg_rule *reg_rule;620	u8 i = 0, j = 0, k = 0;621	u8 num_rules;622	u16 max_bw;623	u32 flags;624	char alpha2[3];625 626	num_rules = reg_info->num_5g_reg_rules + reg_info->num_2g_reg_rules;627 628	/* FIXME: Currently taking reg rules for 6G only from Indoor AP mode list.629	 * This can be updated to choose the combination dynamically based on AP630	 * type and client type, after complete 6G regulatory support is added.631	 */632	if (reg_info->is_ext_reg_event)633		num_rules += reg_info->num_6g_reg_rules_ap[WMI_REG_INDOOR_AP];634 635	if (!num_rules)636		goto ret;637 638	/* Add max additional rules to accommodate weather radar band */639	if (reg_info->dfs_region == ATH12K_DFS_REG_ETSI)640		num_rules += 2;641 642	tmp_regd = kzalloc(sizeof(*tmp_regd) +643			   (num_rules * sizeof(struct ieee80211_reg_rule)),644			   GFP_ATOMIC);645	if (!tmp_regd)646		goto ret;647 648	memcpy(tmp_regd->alpha2, reg_info->alpha2, REG_ALPHA2_LEN + 1);649	memcpy(alpha2, reg_info->alpha2, REG_ALPHA2_LEN + 1);650	alpha2[2] = '\0';651	tmp_regd->dfs_region = ath12k_map_fw_dfs_region(reg_info->dfs_region);652 653	ath12k_dbg(ab, ATH12K_DBG_REG,654		   "\r\nCountry %s, CFG Regdomain %s FW Regdomain %d, num_reg_rules %d\n",655		   alpha2, ath12k_reg_get_regdom_str(tmp_regd->dfs_region),656		   reg_info->dfs_region, num_rules);657	/* Update reg_rules[] below. Firmware is expected to658	 * send these rules in order(2G rules first and then 5G)659	 */660	for (; i < num_rules; i++) {661		if (reg_info->num_2g_reg_rules &&662		    (i < reg_info->num_2g_reg_rules)) {663			reg_rule = reg_info->reg_rules_2g_ptr + i;664			max_bw = min_t(u16, reg_rule->max_bw,665				       reg_info->max_bw_2g);666			flags = 0;667		} else if (reg_info->num_5g_reg_rules &&668			   (j < reg_info->num_5g_reg_rules)) {669			reg_rule = reg_info->reg_rules_5g_ptr + j++;670			max_bw = min_t(u16, reg_rule->max_bw,671				       reg_info->max_bw_5g);672 673			/* FW doesn't pass NL80211_RRF_AUTO_BW flag for674			 * BW Auto correction, we can enable this by default675			 * for all 5G rules here. The regulatory core performs676			 * BW correction if required and applies flags as677			 * per other BW rule flags we pass from here678			 */679			flags = NL80211_RRF_AUTO_BW;680		} else if (reg_info->is_ext_reg_event &&681			   reg_info->num_6g_reg_rules_ap[WMI_REG_INDOOR_AP] &&682			(k < reg_info->num_6g_reg_rules_ap[WMI_REG_INDOOR_AP])) {683			reg_rule = reg_info->reg_rules_6g_ap_ptr[WMI_REG_INDOOR_AP] + k++;684			max_bw = min_t(u16, reg_rule->max_bw,685				       reg_info->max_bw_6g_ap[WMI_REG_INDOOR_AP]);686			flags = NL80211_RRF_AUTO_BW;687		} else {688			break;689		}690 691		flags |= ath12k_map_fw_reg_flags(reg_rule->flags);692		flags |= ath12k_map_fw_phy_flags(reg_info->phybitmap);693 694		ath12k_reg_update_rule(tmp_regd->reg_rules + i,695				       reg_rule->start_freq,696				       reg_rule->end_freq, max_bw,697				       reg_rule->ant_gain, reg_rule->reg_power,698				       flags);699 700		/* Update dfs cac timeout if the dfs domain is ETSI and the701		 * new rule covers weather radar band.702		 * Default value of '0' corresponds to 60s timeout, so no703		 * need to update that for other rules.704		 */705		if (flags & NL80211_RRF_DFS &&706		    reg_info->dfs_region == ATH12K_DFS_REG_ETSI &&707		    (reg_rule->end_freq > ETSI_WEATHER_RADAR_BAND_LOW &&708		    reg_rule->start_freq < ETSI_WEATHER_RADAR_BAND_HIGH)){709			ath12k_reg_update_weather_radar_band(ab, tmp_regd,710							     reg_rule, &i,711							     flags, max_bw);712			continue;713		}714 715		if (reg_info->is_ext_reg_event) {716			ath12k_dbg(ab, ATH12K_DBG_REG, "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d) (%d, %d)\n",717				   i + 1, reg_rule->start_freq, reg_rule->end_freq,718				   max_bw, reg_rule->ant_gain, reg_rule->reg_power,719				   tmp_regd->reg_rules[i].dfs_cac_ms,720				   flags, reg_rule->psd_flag, reg_rule->psd_eirp);721		} else {722			ath12k_dbg(ab, ATH12K_DBG_REG,723				   "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",724				   i + 1, reg_rule->start_freq, reg_rule->end_freq,725				   max_bw, reg_rule->ant_gain, reg_rule->reg_power,726				   tmp_regd->reg_rules[i].dfs_cac_ms,727				   flags);728		}729	}730 731	tmp_regd->n_reg_rules = i;732 733	if (intersect) {734		default_regd = ab->default_regd[reg_info->phy_id];735 736		/* Get a new regd by intersecting the received regd with737		 * our default regd.738		 */739		new_regd = ath12k_regd_intersect(default_regd, tmp_regd);740		kfree(tmp_regd);741		if (!new_regd) {742			ath12k_warn(ab, "Unable to create intersected regdomain\n");743			goto ret;744		}745	} else {746		new_regd = tmp_regd;747	}748 749ret:750	return new_regd;751}752 753void ath12k_regd_update_work(struct work_struct *work)754{755	struct ath12k *ar = container_of(work, struct ath12k,756					 regd_update_work);757	int ret;758 759	ret = ath12k_regd_update(ar, false);760	if (ret) {761		/* Firmware has already moved to the new regd. We need762		 * to maintain channel consistency across FW, Host driver763		 * and userspace. Hence as a fallback mechanism we can set764		 * the prev or default country code to the firmware.765		 */766		/* TODO: Implement Fallback Mechanism */767	}768}769 770void ath12k_reg_init(struct ieee80211_hw *hw)771{772	hw->wiphy->regulatory_flags = REGULATORY_WIPHY_SELF_MANAGED;773	hw->wiphy->reg_notifier = ath12k_reg_notifier;774}775 776void ath12k_reg_free(struct ath12k_base *ab)777{778	int i;779 780	for (i = 0; i < ab->hw_params->max_radios; i++) {781		kfree(ab->default_regd[i]);782		kfree(ab->new_regd[i]);783	}784}785