brintos

brintos / linux-shallow public Read only

0
0
Text · 7.3 KiB · 8ef5ed2 Raw
220 lines · c
1/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */2/*3 * Copyright (C) 2005-2014, 2018-2021, 2024 Intel Corporation4 * Copyright (C) 2013-2014 Intel Mobile Communications GmbH5 * Copyright (C) 2015 Intel Deutschland GmbH6 */7#ifndef __iwl_op_mode_h__8#define __iwl_op_mode_h__9 10#include <linux/netdevice.h>11#include <linux/debugfs.h>12#include "iwl-dbg-tlv.h"13 14struct iwl_op_mode;15struct iwl_trans;16struct sk_buff;17struct iwl_device_cmd;18struct iwl_rx_cmd_buffer;19struct iwl_fw;20struct iwl_cfg;21 22/**23 * DOC: Operational mode - what is it ?24 *25 * The operational mode (a.k.a. op_mode) is the layer that implements26 * mac80211's handlers. It knows two APIs: mac80211's and the fw's. It uses27 * the transport API to access the HW. The op_mode doesn't need to know how the28 * underlying HW works, since the transport layer takes care of that.29 *30 * There can be several op_mode: i.e. different fw APIs will require two31 * different op_modes. This is why the op_mode is virtualized.32 */33 34/**35 * DOC: Life cycle of the Operational mode36 *37 * The operational mode has a very simple life cycle.38 *39 *	1) The driver layer (iwl-drv.c) chooses the op_mode based on the40 *	   capabilities advertised by the fw file (in TLV format).41 *	2) The driver layer starts the op_mode (ops->start)42 *	3) The op_mode registers mac8021143 *	4) The op_mode is governed by mac8021144 *	5) The driver layer stops the op_mode45 */46 47/**48 * struct iwl_op_mode_ops - op_mode specific operations49 *50 * The op_mode exports its ops so that external components can start it and51 * interact with it. The driver layer typically calls the start and stop52 * handlers, the transport layer calls the others.53 *54 * All the handlers MUST be implemented, except @rx_rss which can be left55 * out *iff* the opmode will never run on hardware with multi-queue capability.56 *57 * @start: start the op_mode. The transport layer is already allocated.58 *	May sleep59 * @stop: stop the op_mode. Must free all the memory allocated.60 *	May sleep61 * @rx: Rx notification to the op_mode. rxb is the Rx buffer itself. Cmd is the62 *	HCMD this Rx responds to. Can't sleep.63 * @rx_rss: data queue RX notification to the op_mode, for (data) notifications64 *	received on the RSS queue(s). The queue parameter indicates which of the65 *	RSS queues received this frame; it will always be non-zero.66 *	This method must not sleep.67 * @queue_full: notifies that a HW queue is full.68 *	Must be atomic and called with BH disabled.69 * @queue_not_full: notifies that a HW queue is not full any more.70 *	Must be atomic and called with BH disabled.71 * @hw_rf_kill: notifies of a change in the HW rf kill switch. True means that72 *	the radio is killed. Return %true if the device should be stopped by73 *	the transport immediately after the call. May sleep.74 *	Note that this must not return %true for newer devices using gen2 PCIe75 *	transport.76 * @free_skb: allows the transport layer to free skbs that haven't been77 *	reclaimed by the op_mode. This can happen when the driver is freed and78 *	there are Tx packets pending in the transport layer.79 *	Must be atomic80 * @nic_error: error notification. Must be atomic and must be called with BH81 *	disabled, unless the sync parameter is true.82 * @cmd_queue_full: Called when the command queue gets full. Must be atomic and83 *	called with BH disabled.84 * @nic_config: configure NIC, called before firmware is started.85 *	May sleep86 * @wimax_active: invoked when WiMax becomes active. May sleep87 * @time_point: called when transport layer wants to collect debug data88 * @device_powered_off: called upon resume from hibernation but not only.89 *	Op_mode needs to reset its internal state because the device did not90 *	survive the system state transition. The firmware is no longer running,91 *	etc...92 */93struct iwl_op_mode_ops {94	struct iwl_op_mode *(*start)(struct iwl_trans *trans,95				     const struct iwl_cfg *cfg,96				     const struct iwl_fw *fw,97				     struct dentry *dbgfs_dir);98	void (*stop)(struct iwl_op_mode *op_mode);99	void (*rx)(struct iwl_op_mode *op_mode, struct napi_struct *napi,100		   struct iwl_rx_cmd_buffer *rxb);101	void (*rx_rss)(struct iwl_op_mode *op_mode, struct napi_struct *napi,102		       struct iwl_rx_cmd_buffer *rxb, unsigned int queue);103	void (*queue_full)(struct iwl_op_mode *op_mode, int queue);104	void (*queue_not_full)(struct iwl_op_mode *op_mode, int queue);105	bool (*hw_rf_kill)(struct iwl_op_mode *op_mode, bool state);106	void (*free_skb)(struct iwl_op_mode *op_mode, struct sk_buff *skb);107	void (*nic_error)(struct iwl_op_mode *op_mode, bool sync);108	void (*cmd_queue_full)(struct iwl_op_mode *op_mode);109	void (*nic_config)(struct iwl_op_mode *op_mode);110	void (*wimax_active)(struct iwl_op_mode *op_mode);111	void (*time_point)(struct iwl_op_mode *op_mode,112			   enum iwl_fw_ini_time_point tp_id,113			   union iwl_dbg_tlv_tp_data *tp_data);114	void (*device_powered_off)(struct iwl_op_mode *op_mode);115};116 117int iwl_opmode_register(const char *name, const struct iwl_op_mode_ops *ops);118void iwl_opmode_deregister(const char *name);119 120/**121 * struct iwl_op_mode - operational mode122 * @ops: pointer to its own ops123 *124 * This holds an implementation of the mac80211 / fw API.125 */126struct iwl_op_mode {127	const struct iwl_op_mode_ops *ops;128 129	char op_mode_specific[] __aligned(sizeof(void *));130};131 132static inline void iwl_op_mode_stop(struct iwl_op_mode *op_mode)133{134	might_sleep();135	op_mode->ops->stop(op_mode);136}137 138static inline void iwl_op_mode_rx(struct iwl_op_mode *op_mode,139				  struct napi_struct *napi,140				  struct iwl_rx_cmd_buffer *rxb)141{142	return op_mode->ops->rx(op_mode, napi, rxb);143}144 145static inline void iwl_op_mode_rx_rss(struct iwl_op_mode *op_mode,146				      struct napi_struct *napi,147				      struct iwl_rx_cmd_buffer *rxb,148				      unsigned int queue)149{150	op_mode->ops->rx_rss(op_mode, napi, rxb, queue);151}152 153static inline void iwl_op_mode_queue_full(struct iwl_op_mode *op_mode,154					  int queue)155{156	op_mode->ops->queue_full(op_mode, queue);157}158 159static inline void iwl_op_mode_queue_not_full(struct iwl_op_mode *op_mode,160					      int queue)161{162	op_mode->ops->queue_not_full(op_mode, queue);163}164 165static inline bool __must_check166iwl_op_mode_hw_rf_kill(struct iwl_op_mode *op_mode, bool state)167{168	might_sleep();169	return op_mode->ops->hw_rf_kill(op_mode, state);170}171 172static inline void iwl_op_mode_free_skb(struct iwl_op_mode *op_mode,173					struct sk_buff *skb)174{175	if (WARN_ON_ONCE(!op_mode))176		return;177	op_mode->ops->free_skb(op_mode, skb);178}179 180static inline void iwl_op_mode_nic_error(struct iwl_op_mode *op_mode, bool sync)181{182	op_mode->ops->nic_error(op_mode, sync);183}184 185static inline void iwl_op_mode_cmd_queue_full(struct iwl_op_mode *op_mode)186{187	op_mode->ops->cmd_queue_full(op_mode);188}189 190static inline void iwl_op_mode_nic_config(struct iwl_op_mode *op_mode)191{192	might_sleep();193	if (op_mode->ops->nic_config)194		op_mode->ops->nic_config(op_mode);195}196 197static inline void iwl_op_mode_wimax_active(struct iwl_op_mode *op_mode)198{199	might_sleep();200	op_mode->ops->wimax_active(op_mode);201}202 203static inline void iwl_op_mode_time_point(struct iwl_op_mode *op_mode,204					  enum iwl_fw_ini_time_point tp_id,205					  union iwl_dbg_tlv_tp_data *tp_data)206{207	if (!op_mode || !op_mode->ops || !op_mode->ops->time_point)208		return;209	op_mode->ops->time_point(op_mode, tp_id, tp_data);210}211 212static inline void iwl_op_mode_device_powered_off(struct iwl_op_mode *op_mode)213{214	if (!op_mode || !op_mode->ops || !op_mode->ops->device_powered_off)215		return;216	op_mode->ops->device_powered_off(op_mode);217}218 219#endif /* __iwl_op_mode_h__ */220