brintos

brintos / linux-shallow public Read only

0
0
Text · 22.7 KiB · 4c3bb68 Raw
772 lines · c
1// SPDX-License-Identifier: GPL-2.0-or-later2/*3 * acerhdf - A driver which monitors the temperature4 *           of the aspire one netbook, turns on/off the fan5 *           as soon as the upper/lower threshold is reached.6 *7 * (C) 2009 - Peter Kaestle     peter (a) piie.net8 *                              https://piie.net9 *     2009 Borislav Petkov	bp (a) alien8.de10 *11 * Inspired by and many thanks to:12 *  o acerfand   - Rachel Greenham13 *  o acer_ec.pl - Michael Kurz     michi.kurz (at) googlemail.com14 *               - Petr Tomasek     tomasek (#) etf,cuni,cz15 *               - Carlos Corbacho  cathectic (at) gmail.com16 *  o lkml       - Matthew Garrett17 *               - Borislav Petkov18 *               - Andreas Mohr19 */20 21#define pr_fmt(fmt) "acerhdf: " fmt22 23#include <linux/kernel.h>24#include <linux/module.h>25#include <linux/dmi.h>26#include <linux/acpi.h>27#include <linux/thermal.h>28#include <linux/platform_device.h>29 30/*31 * The driver is started with "kernel mode off" by default. That means, the BIOS32 * is still in control of the fan. In this mode the driver allows to read the33 * temperature of the cpu and a userspace tool may take over control of the fan.34 * If the driver is switched to "kernel mode" (e.g. via module parameter) the35 * driver is in full control of the fan. If you want the module to be started in36 * kernel mode by default, define the following:37 */38#undef START_IN_KERNEL_MODE39 40#define DRV_VER "0.7.0"41 42/*43 * According to the Atom N270 datasheet,44 * (http://download.intel.com/design/processor/datashts/320032.pdf) the45 * CPU's optimal operating limits denoted in junction temperature as46 * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,47 * assume 89°C is critical temperature.48 */49#define ACERHDF_DEFAULT_TEMP_FANON 6000050#define ACERHDF_DEFAULT_TEMP_FANOFF 5300051#define ACERHDF_TEMP_CRIT 8900052#define ACERHDF_FAN_OFF 053#define ACERHDF_FAN_AUTO 154 55/*56 * No matter what value the user puts into the fanon variable, turn on the fan57 * at 80 degree Celsius to prevent hardware damage58 */59#define ACERHDF_MAX_FANON 8000060 61/*62 * Maximum interval between two temperature checks is 15 seconds, as the die63 * can get hot really fast under heavy load (plus we shouldn't forget about64 * possible impact of _external_ aggressive sources such as heaters, sun etc.)65 */66#define ACERHDF_MAX_INTERVAL 1567 68#ifdef START_IN_KERNEL_MODE69static int kernelmode = 1;70#else71static int kernelmode;72#endif73 74static unsigned int interval = 10;75static unsigned int fanon = ACERHDF_DEFAULT_TEMP_FANON;76static unsigned int fanoff = ACERHDF_DEFAULT_TEMP_FANOFF;77static unsigned int verbose;78static unsigned int list_supported;79static unsigned int fanstate = ACERHDF_FAN_AUTO;80static char force_bios[16];81static char force_product[16];82static struct thermal_zone_device *thz_dev;83static struct thermal_cooling_device *cl_dev;84static struct platform_device *acerhdf_dev;85 86module_param(kernelmode, uint, 0);87MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");88module_param(fanon, uint, 0600);89MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature");90module_param(fanoff, uint, 0600);91MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature");92module_param(verbose, uint, 0600);93MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");94module_param(list_supported, uint, 0600);95MODULE_PARM_DESC(list_supported, "List supported models and BIOS versions");96module_param_string(force_bios, force_bios, 16, 0);97MODULE_PARM_DESC(force_bios, "Pretend system has this known supported BIOS version");98module_param_string(force_product, force_product, 16, 0);99MODULE_PARM_DESC(force_product, "Pretend system is this known supported model");100 101/*102 * cmd_off: to switch the fan completely off and check if the fan is off103 *	cmd_auto: to set the BIOS in control of the fan. The BIOS regulates then104 *		the fan speed depending on the temperature105 */106struct fancmd {107	u8 cmd_off;108	u8 cmd_auto;109};110 111struct manualcmd {112	u8 mreg;113	u8 moff;114};115 116/* default register and command to disable fan in manual mode */117static const struct manualcmd mcmd = {118	.mreg = 0x94,119	.moff = 0xff,120};121 122/* BIOS settings - only used during probe */123struct bios_settings {124	const char *vendor;125	const char *product;126	const char *version;127	u8 fanreg;128	u8 tempreg;129	struct fancmd cmd;130	int mcmd_enable;131};132 133/* This could be a daughter struct in the above, but not worth the redirect */134struct ctrl_settings {135	u8 fanreg;136	u8 tempreg;137	struct fancmd cmd;138	int mcmd_enable;139};140 141static struct thermal_trip trips[] = {142	[0] = { .temperature = ACERHDF_DEFAULT_TEMP_FANON,143		.hysteresis = ACERHDF_DEFAULT_TEMP_FANON - ACERHDF_DEFAULT_TEMP_FANOFF,144		.type = THERMAL_TRIP_ACTIVE },145 146	[1] = { .temperature = ACERHDF_TEMP_CRIT,147		.type = THERMAL_TRIP_CRITICAL }148};149 150static struct ctrl_settings ctrl_cfg __read_mostly;151 152/* Register addresses and values for different BIOS versions */153static const struct bios_settings bios_tbl[] __initconst = {154	/* AOA110 */155	{"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x00}, 0},156	{"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x00}, 0},157	{"Acer", "AOA110", "v0.3301", 0x55, 0x58, {0xaf, 0x00}, 0},158	{"Acer", "AOA110", "v0.3304", 0x55, 0x58, {0xaf, 0x00}, 0},159	{"Acer", "AOA110", "v0.3305", 0x55, 0x58, {0xaf, 0x00}, 0},160	{"Acer", "AOA110", "v0.3307", 0x55, 0x58, {0xaf, 0x00}, 0},161	{"Acer", "AOA110", "v0.3308", 0x55, 0x58, {0x21, 0x00}, 0},162	{"Acer", "AOA110", "v0.3309", 0x55, 0x58, {0x21, 0x00}, 0},163	{"Acer", "AOA110", "v0.3310", 0x55, 0x58, {0x21, 0x00}, 0},164	/* AOA150 */165	{"Acer", "AOA150", "v0.3114", 0x55, 0x58, {0x1f, 0x00}, 0},166	{"Acer", "AOA150", "v0.3301", 0x55, 0x58, {0x20, 0x00}, 0},167	{"Acer", "AOA150", "v0.3304", 0x55, 0x58, {0x20, 0x00}, 0},168	{"Acer", "AOA150", "v0.3305", 0x55, 0x58, {0x20, 0x00}, 0},169	{"Acer", "AOA150", "v0.3307", 0x55, 0x58, {0x20, 0x00}, 0},170	{"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x00}, 0},171	{"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x00}, 0},172	{"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x00}, 0},173	/* LT1005u */174	{"Acer", "LT-10Q", "v0.3310", 0x55, 0x58, {0x20, 0x00}, 0},175	/* Acer 1410 */176	{"Acer", "Aspire 1410", "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0},177	{"Acer", "Aspire 1410", "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0},178	{"Acer", "Aspire 1410", "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0},179	{"Acer", "Aspire 1410", "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0},180	{"Acer", "Aspire 1410", "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0},181	{"Acer", "Aspire 1410", "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0},182	{"Acer", "Aspire 1410", "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0},183	{"Acer", "Aspire 1410", "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0},184	{"Acer", "Aspire 1410", "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0},185	{"Acer", "Aspire 1410", "v1.3310", 0x55, 0x58, {0x9e, 0x00}, 0},186	{"Acer", "Aspire 1410", "v1.3314", 0x55, 0x58, {0x9e, 0x00}, 0},187	/* Acer 1810xx */188	{"Acer", "Aspire 1810TZ", "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0},189	{"Acer", "Aspire 1810T",  "v0.3108", 0x55, 0x58, {0x9e, 0x00}, 0},190	{"Acer", "Aspire 1810TZ", "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0},191	{"Acer", "Aspire 1810T",  "v0.3113", 0x55, 0x58, {0x9e, 0x00}, 0},192	{"Acer", "Aspire 1810TZ", "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0},193	{"Acer", "Aspire 1810T",  "v0.3115", 0x55, 0x58, {0x9e, 0x00}, 0},194	{"Acer", "Aspire 1810TZ", "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0},195	{"Acer", "Aspire 1810T",  "v0.3117", 0x55, 0x58, {0x9e, 0x00}, 0},196	{"Acer", "Aspire 1810TZ", "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0},197	{"Acer", "Aspire 1810T",  "v0.3119", 0x55, 0x58, {0x9e, 0x00}, 0},198	{"Acer", "Aspire 1810TZ", "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0},199	{"Acer", "Aspire 1810T",  "v0.3120", 0x55, 0x58, {0x9e, 0x00}, 0},200	{"Acer", "Aspire 1810TZ", "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0},201	{"Acer", "Aspire 1810T",  "v1.3204", 0x55, 0x58, {0x9e, 0x00}, 0},202	{"Acer", "Aspire 1810TZ", "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0},203	{"Acer", "Aspire 1810T",  "v1.3303", 0x55, 0x58, {0x9e, 0x00}, 0},204	{"Acer", "Aspire 1810TZ", "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0},205	{"Acer", "Aspire 1810T",  "v1.3308", 0x55, 0x58, {0x9e, 0x00}, 0},206	{"Acer", "Aspire 1810TZ", "v1.3310", 0x55, 0x58, {0x9e, 0x00}, 0},207	{"Acer", "Aspire 1810T",  "v1.3310", 0x55, 0x58, {0x9e, 0x00}, 0},208	{"Acer", "Aspire 1810TZ", "v1.3314", 0x55, 0x58, {0x9e, 0x00}, 0},209	{"Acer", "Aspire 1810T",  "v1.3314", 0x55, 0x58, {0x9e, 0x00}, 0},210	/* Acer 5755G */211	{"Acer", "Aspire 5755G",  "V1.20",   0xab, 0xb4, {0x00, 0x08}, 0},212	{"Acer", "Aspire 5755G",  "V1.21",   0xab, 0xb3, {0x00, 0x08}, 0},213	/* Acer 521 */214	{"Acer", "AO521", "V1.11", 0x55, 0x58, {0x1f, 0x00}, 0},215	/* Acer 531 */216	{"Acer", "AO531h", "v0.3104", 0x55, 0x58, {0x20, 0x00}, 0},217	{"Acer", "AO531h", "v0.3201", 0x55, 0x58, {0x20, 0x00}, 0},218	{"Acer", "AO531h", "v0.3304", 0x55, 0x58, {0x20, 0x00}, 0},219	/* Acer 751 */220	{"Acer", "AO751h", "V0.3206", 0x55, 0x58, {0x21, 0x00}, 0},221	{"Acer", "AO751h", "V0.3212", 0x55, 0x58, {0x21, 0x00}, 0},222	/* Acer 753 */223	{"Acer", "Aspire One 753", "V1.24", 0x93, 0xac, {0x14, 0x04}, 1},224	/* Acer 1825 */225	{"Acer", "Aspire 1825PTZ", "V1.3118", 0x55, 0x58, {0x9e, 0x00}, 0},226	{"Acer", "Aspire 1825PTZ", "V1.3127", 0x55, 0x58, {0x9e, 0x00}, 0},227	/* Acer Extensa 5420 */228	{"Acer", "Extensa 5420", "V1.17", 0x93, 0xac, {0x14, 0x04}, 1},229	/* Acer Aspire 5315 */230	{"Acer", "Aspire 5315", "V1.19", 0x93, 0xac, {0x14, 0x04}, 1},231	/* Acer Aspire 5739 */232	{"Acer", "Aspire 5739G", "V1.3311", 0x55, 0x58, {0x20, 0x00}, 0},233	/* Acer TravelMate 7730 */234	{"Acer", "TravelMate 7730G", "v0.3509", 0x55, 0x58, {0xaf, 0x00}, 0},235	/* Acer Aspire 7551 */236	{"Acer", "Aspire 7551", "V1.18", 0x93, 0xa8, {0x14, 0x04}, 1},237	/* Acer TravelMate TM8573T */238	{"Acer", "TM8573T", "V1.13", 0x93, 0xa8, {0x14, 0x04}, 1},239	/* Gateway */240	{"Gateway", "AOA110", "v0.3103",  0x55, 0x58, {0x21, 0x00}, 0},241	{"Gateway", "AOA150", "v0.3103",  0x55, 0x58, {0x20, 0x00}, 0},242	{"Gateway", "LT31",   "v1.3103",  0x55, 0x58, {0x9e, 0x00}, 0},243	{"Gateway", "LT31",   "v1.3201",  0x55, 0x58, {0x9e, 0x00}, 0},244	{"Gateway", "LT31",   "v1.3302",  0x55, 0x58, {0x9e, 0x00}, 0},245	{"Gateway", "LT31",   "v1.3303t", 0x55, 0x58, {0x9e, 0x00}, 0},246	{"Gateway", "LT31",   "v1.3307",  0x55, 0x58, {0x9e, 0x00}, 0},247	/* Packard Bell */248	{"Packard Bell", "DOA150",  "v0.3104",  0x55, 0x58, {0x21, 0x00}, 0},249	{"Packard Bell", "DOA150",  "v0.3105",  0x55, 0x58, {0x20, 0x00}, 0},250	{"Packard Bell", "AOA110",  "v0.3105",  0x55, 0x58, {0x21, 0x00}, 0},251	{"Packard Bell", "AOA150",  "v0.3105",  0x55, 0x58, {0x20, 0x00}, 0},252	{"Packard Bell", "ENBFT",   "V1.3118",  0x55, 0x58, {0x9e, 0x00}, 0},253	{"Packard Bell", "ENBFT",   "V1.3127",  0x55, 0x58, {0x9e, 0x00}, 0},254	{"Packard Bell", "DOTMU",   "v1.3303",  0x55, 0x58, {0x9e, 0x00}, 0},255	{"Packard Bell", "DOTMU",   "v0.3120",  0x55, 0x58, {0x9e, 0x00}, 0},256	{"Packard Bell", "DOTMU",   "v0.3108",  0x55, 0x58, {0x9e, 0x00}, 0},257	{"Packard Bell", "DOTMU",   "v0.3113",  0x55, 0x58, {0x9e, 0x00}, 0},258	{"Packard Bell", "DOTMU",   "v0.3115",  0x55, 0x58, {0x9e, 0x00}, 0},259	{"Packard Bell", "DOTMU",   "v0.3117",  0x55, 0x58, {0x9e, 0x00}, 0},260	{"Packard Bell", "DOTMU",   "v0.3119",  0x55, 0x58, {0x9e, 0x00}, 0},261	{"Packard Bell", "DOTMU",   "v1.3204",  0x55, 0x58, {0x9e, 0x00}, 0},262	{"Packard Bell", "DOTMA",   "v1.3201",  0x55, 0x58, {0x9e, 0x00}, 0},263	{"Packard Bell", "DOTMA",   "v1.3302",  0x55, 0x58, {0x9e, 0x00}, 0},264	{"Packard Bell", "DOTMA",   "v1.3303t", 0x55, 0x58, {0x9e, 0x00}, 0},265	{"Packard Bell", "DOTVR46", "v1.3308",  0x55, 0x58, {0x9e, 0x00}, 0},266	/* pewpew-terminator */267	{"", "", "", 0, 0, {0, 0}, 0}268};269 270/*271 * this struct is used to instruct thermal layer to use bang_bang instead of272 * default governor for acerhdf273 */274static struct thermal_zone_params acerhdf_zone_params = {275	.governor_name = "bang_bang",276};277 278static int acerhdf_get_temp(int *temp)279{280	u8 read_temp;281 282	if (ec_read(ctrl_cfg.tempreg, &read_temp))283		return -EINVAL;284 285	*temp = read_temp * 1000;286 287	return 0;288}289 290static int acerhdf_get_fanstate(int *state)291{292	u8 fan;293 294	if (ec_read(ctrl_cfg.fanreg, &fan))295		return -EINVAL;296 297	if (fan != ctrl_cfg.cmd.cmd_off)298		*state = ACERHDF_FAN_AUTO;299	else300		*state = ACERHDF_FAN_OFF;301 302	return 0;303}304 305static void acerhdf_change_fanstate(int state)306{307	unsigned char cmd;308 309	if (verbose)310		pr_notice("fan %s\n", state == ACERHDF_FAN_OFF ? "OFF" : "ON");311 312	if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) {313		pr_err("invalid fan state %d requested, setting to auto!\n",314		       state);315		state = ACERHDF_FAN_AUTO;316	}317 318	cmd = (state == ACERHDF_FAN_OFF) ? ctrl_cfg.cmd.cmd_off319					 : ctrl_cfg.cmd.cmd_auto;320	fanstate = state;321 322	ec_write(ctrl_cfg.fanreg, cmd);323 324	if (ctrl_cfg.mcmd_enable && state == ACERHDF_FAN_OFF) {325		if (verbose)326			pr_notice("turning off fan manually\n");327		ec_write(mcmd.mreg, mcmd.moff);328	}329}330 331static void acerhdf_check_param(struct thermal_zone_device *thermal)332{333	if (fanon > ACERHDF_MAX_FANON) {334		pr_err("fanon temperature too high, set to %d\n",335		       ACERHDF_MAX_FANON);336		fanon = ACERHDF_MAX_FANON;337	}338 339	if (fanon < fanoff) {340		pr_err("fanoff temperature (%d) is above fanon temperature (%d), clamping to %d\n",341		       fanoff, fanon, fanon);342		fanoff = fanon;343	}344 345	trips[0].temperature = fanon;346	trips[0].hysteresis  = fanon - fanoff;347 348	if (kernelmode) {349		if (interval > ACERHDF_MAX_INTERVAL) {350			pr_err("interval too high, set to %d\n",351			       ACERHDF_MAX_INTERVAL);352			interval = ACERHDF_MAX_INTERVAL;353		}354 355		if (verbose)356			pr_notice("interval changed to: %d\n", interval);357	}358}359 360/*361 * This is the thermal zone callback which does the delayed polling of the fan362 * state. We do check /sysfs-originating settings here in acerhdf_check_param()363 * as late as the polling interval is since we can't do that in the respective364 * accessors of the module parameters.365 */366static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal, int *t)367{368	int temp, err = 0;369 370	err = acerhdf_get_temp(&temp);371	if (err)372		return err;373 374	if (verbose)375		pr_notice("temp %d\n", temp);376 377	*t = temp;378	return 0;379}380 381static bool acerhdf_should_bind(struct thermal_zone_device *thermal,382				const struct thermal_trip *trip,383				struct thermal_cooling_device *cdev,384				struct cooling_spec *c)385{386	/* if the cooling device is the one from acerhdf bind it */387	return cdev == cl_dev && trip->type == THERMAL_TRIP_ACTIVE;388}389 390static inline void acerhdf_revert_to_bios_mode(void)391{392	acerhdf_change_fanstate(ACERHDF_FAN_AUTO);393	kernelmode = 0;394 395	pr_notice("kernel mode fan control OFF\n");396}397static inline void acerhdf_enable_kernelmode(void)398{399	kernelmode = 1;400 401	pr_notice("kernel mode fan control ON\n");402}403 404/*405 * set operation mode;406 * enabled: the thermal layer of the kernel takes care about407 *          the temperature and the fan.408 * disabled: the BIOS takes control of the fan.409 */410static int acerhdf_change_mode(struct thermal_zone_device *thermal,411			       enum thermal_device_mode mode)412{413	if (mode == THERMAL_DEVICE_DISABLED && kernelmode)414		acerhdf_revert_to_bios_mode();415	else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)416		acerhdf_enable_kernelmode();417 418	return 0;419}420 421static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,422				 int *temperature)423{424	*temperature = ACERHDF_TEMP_CRIT;425	return 0;426}427 428/* bind callback functions to thermalzone */429static struct thermal_zone_device_ops acerhdf_dev_ops = {430	.should_bind = acerhdf_should_bind,431	.get_temp = acerhdf_get_ec_temp,432	.change_mode = acerhdf_change_mode,433	.get_crit_temp = acerhdf_get_crit_temp,434};435 436/*437 * cooling device callback functions438 * get maximal fan cooling state439 */440static int acerhdf_get_max_state(struct thermal_cooling_device *cdev,441				 unsigned long *state)442{443	*state = 1;444 445	return 0;446}447 448static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev,449				 unsigned long *state)450{451	int err = 0, tmp;452 453	err = acerhdf_get_fanstate(&tmp);454	if (err)455		return err;456 457	*state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0;458	return 0;459}460 461/* change current fan state - is overwritten when running in kernel mode */462static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,463				 unsigned long state)464{465	int cur_temp, cur_state, err = 0;466 467	if (!kernelmode)468		return 0;469 470	err = acerhdf_get_temp(&cur_temp);471	if (err) {472		pr_err("error reading temperature, hand off control to BIOS\n");473		goto err_out;474	}475 476	err = acerhdf_get_fanstate(&cur_state);477	if (err) {478		pr_err("error reading fan state, hand off control to BIOS\n");479		goto err_out;480	}481 482	if (state == 0) {483		if (cur_state == ACERHDF_FAN_AUTO)484			acerhdf_change_fanstate(ACERHDF_FAN_OFF);485	} else {486		if (cur_state == ACERHDF_FAN_OFF)487			acerhdf_change_fanstate(ACERHDF_FAN_AUTO);488	}489	return 0;490 491err_out:492	acerhdf_revert_to_bios_mode();493	return -EINVAL;494}495 496/* bind fan callbacks to fan device */497static const struct thermal_cooling_device_ops acerhdf_cooling_ops = {498	.get_max_state = acerhdf_get_max_state,499	.get_cur_state = acerhdf_get_cur_state,500	.set_cur_state = acerhdf_set_cur_state,501};502 503/* suspend / resume functionality */504static int acerhdf_suspend(struct device *dev)505{506	if (kernelmode)507		acerhdf_change_fanstate(ACERHDF_FAN_AUTO);508 509	if (verbose)510		pr_notice("going suspend\n");511 512	return 0;513}514 515static int acerhdf_probe(struct platform_device *device)516{517	return 0;518}519 520static const struct dev_pm_ops acerhdf_pm_ops = {521	.suspend = acerhdf_suspend,522	.freeze  = acerhdf_suspend,523};524 525static struct platform_driver acerhdf_driver = {526	.driver = {527		.name  = "acerhdf",528		.pm    = &acerhdf_pm_ops,529	},530	.probe = acerhdf_probe,531};532 533/* check hardware */534static int __init acerhdf_check_hardware(void)535{536	char const *vendor, *version, *product;537	const struct bios_settings *bt = NULL;538	int found = 0;539 540	/* get BIOS data */541	vendor  = dmi_get_system_info(DMI_SYS_VENDOR);542	version = dmi_get_system_info(DMI_BIOS_VERSION);543	product = dmi_get_system_info(DMI_PRODUCT_NAME);544 545	if (!vendor || !version || !product) {546		pr_err("error getting hardware information\n");547		return -EINVAL;548	}549 550	pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);551 552	if (list_supported) {553		pr_info("List of supported Manufacturer/Model/BIOS:\n");554		pr_info("---------------------------------------------------\n");555		for (bt = bios_tbl; bt->vendor[0]; bt++) {556			pr_info("%-13s | %-17s | %-10s\n", bt->vendor,557				bt->product, bt->version);558		}559		pr_info("---------------------------------------------------\n");560		return -ECANCELED;561	}562 563	if (force_bios[0]) {564		version = force_bios;565		pr_info("forcing BIOS version: %s\n", version);566		kernelmode = 0;567	}568 569	if (force_product[0]) {570		product = force_product;571		pr_info("forcing BIOS product: %s\n", product);572		kernelmode = 0;573	}574 575	if (verbose)576		pr_info("BIOS info: %s %s, product: %s\n",577			vendor, version, product);578 579	/* search BIOS version and vendor in BIOS settings table */580	for (bt = bios_tbl; bt->vendor[0]; bt++) {581		/*582		 * check if actual hardware BIOS vendor, product and version583		 * IDs start with the strings of BIOS table entry584		 */585		if (strstarts(vendor, bt->vendor) &&586		    strstarts(product, bt->product) &&587		    strstarts(version, bt->version)) {588			found = 1;589			break;590		}591	}592 593	if (!found) {594		pr_err("unknown (unsupported) BIOS version %s/%s/%s, please report, aborting!\n",595		       vendor, product, version);596		return -EINVAL;597	}598 599	/* Copy control settings from BIOS table before we free it. */600	ctrl_cfg.fanreg = bt->fanreg;601	ctrl_cfg.tempreg = bt->tempreg;602	memcpy(&ctrl_cfg.cmd, &bt->cmd, sizeof(struct fancmd));603	ctrl_cfg.mcmd_enable = bt->mcmd_enable;604 605	/*606	 * if started with kernel mode off, prevent the kernel from switching607	 * off the fan608	 */609	if (!kernelmode) {610		pr_notice("Fan control off, to enable do:\n");611		pr_notice("echo -n \"enabled\" > /sys/class/thermal/thermal_zoneN/mode # N=0,1,2...\n");612	}613 614	return 0;615}616 617static int __init acerhdf_register_platform(void)618{619	int err = 0;620 621	err = platform_driver_register(&acerhdf_driver);622	if (err)623		return err;624 625	acerhdf_dev = platform_device_alloc("acerhdf", PLATFORM_DEVID_NONE);626	if (!acerhdf_dev) {627		err = -ENOMEM;628		goto err_device_alloc;629	}630	err = platform_device_add(acerhdf_dev);631	if (err)632		goto err_device_add;633 634	return 0;635 636err_device_add:637	platform_device_put(acerhdf_dev);638err_device_alloc:639	platform_driver_unregister(&acerhdf_driver);640	return err;641}642 643static void acerhdf_unregister_platform(void)644{645	platform_device_unregister(acerhdf_dev);646	platform_driver_unregister(&acerhdf_driver);647}648 649static int __init acerhdf_register_thermal(void)650{651	int ret;652 653	cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,654						 &acerhdf_cooling_ops);655 656	if (IS_ERR(cl_dev))657		return -EINVAL;658 659	thz_dev = thermal_zone_device_register_with_trips("acerhdf", trips, ARRAY_SIZE(trips),660							  NULL, &acerhdf_dev_ops,661							  &acerhdf_zone_params, 0,662							  (kernelmode) ? interval*1000 : 0);663	if (IS_ERR(thz_dev))664		return -EINVAL;665 666	if (kernelmode)667		ret = thermal_zone_device_enable(thz_dev);668	else669		ret = thermal_zone_device_disable(thz_dev);670	if (ret)671		return ret;672 673	return 0;674}675 676static void acerhdf_unregister_thermal(void)677{678	if (cl_dev) {679		thermal_cooling_device_unregister(cl_dev);680		cl_dev = NULL;681	}682 683	if (thz_dev) {684		thermal_zone_device_unregister(thz_dev);685		thz_dev = NULL;686	}687}688 689static int __init acerhdf_init(void)690{691	int err = 0;692 693	err = acerhdf_check_hardware();694	if (err)695		goto out_err;696 697	err = acerhdf_register_platform();698	if (err)699		goto out_err;700 701	err = acerhdf_register_thermal();702	if (err)703		goto err_unreg;704 705	return 0;706 707err_unreg:708	acerhdf_unregister_thermal();709	acerhdf_unregister_platform();710 711out_err:712	return err;713}714 715static void __exit acerhdf_exit(void)716{717	acerhdf_change_fanstate(ACERHDF_FAN_AUTO);718	acerhdf_unregister_thermal();719	acerhdf_unregister_platform();720}721 722MODULE_LICENSE("GPL");723MODULE_AUTHOR("Peter Kaestle");724MODULE_DESCRIPTION("Aspire One temperature and fan driver");725MODULE_ALIAS("dmi:*:*Acer*:pnAOA*:");726MODULE_ALIAS("dmi:*:*Acer*:pnAO751h*:");727MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1410*:");728MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1810*:");729MODULE_ALIAS("dmi:*:*Acer*:pnAspire*5755G:");730MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1825PTZ:");731MODULE_ALIAS("dmi:*:*Acer*:pnAO521*:");732MODULE_ALIAS("dmi:*:*Acer*:pnAO531*:");733MODULE_ALIAS("dmi:*:*Acer*:pnAspire*5739G:");734MODULE_ALIAS("dmi:*:*Acer*:pnAspire*One*753:");735MODULE_ALIAS("dmi:*:*Acer*:pnAspire*5315:");736MODULE_ALIAS("dmi:*:*Acer*:TravelMate*7730G:");737MODULE_ALIAS("dmi:*:*Acer*:pnAspire*7551:");738MODULE_ALIAS("dmi:*:*Acer*:TM8573T:");739MODULE_ALIAS("dmi:*:*Gateway*:pnAOA*:");740MODULE_ALIAS("dmi:*:*Gateway*:pnLT31*:");741MODULE_ALIAS("dmi:*:*Packard*Bell*:pnAOA*:");742MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOA*:");743MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMU*:");744MODULE_ALIAS("dmi:*:*Packard*Bell*:pnENBFT*:");745MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMA*:");746MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTVR46*:");747MODULE_ALIAS("dmi:*:*Acer*:pnExtensa*5420*:");748 749module_init(acerhdf_init);750module_exit(acerhdf_exit);751 752static int interval_set_uint(const char *val, const struct kernel_param *kp)753{754	int ret;755 756	ret = param_set_uint(val, kp);757	if (ret)758		return ret;759 760	acerhdf_check_param(thz_dev);761 762	return 0;763}764 765static const struct kernel_param_ops interval_ops = {766	.set = interval_set_uint,767	.get = param_get_uint,768};769 770module_param_cb(interval, &interval_ops, &interval, 0000);771MODULE_PARM_DESC(interval, "Polling interval of temperature check");772