brintos

brintos / linux-shallow public Read only

0
0
Text · 31.1 KiB · fdcf742 Raw
1157 lines · c
1// SPDX-License-Identifier: GPL-2.0-or-later2/*3 * RapidIO enumeration and discovery support4 *5 * Copyright 2005 MontaVista Software, Inc.6 * Matt Porter <mporter@kernel.crashing.org>7 *8 * Copyright 2009 Integrated Device Technology, Inc.9 * Alex Bounine <alexandre.bounine@idt.com>10 * - Added Port-Write/Error Management initialization and handling11 *12 * Copyright 2009 Sysgo AG13 * Thomas Moll <thomas.moll@sysgo.com>14 * - Added Input- Output- enable functionality, to allow full communication15 */16 17#include <linux/types.h>18#include <linux/kernel.h>19 20#include <linux/delay.h>21#include <linux/dma-mapping.h>22#include <linux/init.h>23#include <linux/rio.h>24#include <linux/rio_drv.h>25#include <linux/rio_ids.h>26#include <linux/rio_regs.h>27#include <linux/module.h>28#include <linux/spinlock.h>29#include <linux/timer.h>30#include <linux/sched.h>31#include <linux/jiffies.h>32#include <linux/slab.h>33 34#include "rio.h"35 36static void rio_init_em(struct rio_dev *rdev);37 38struct rio_id_table {39	u16 start;	/* logical minimal id */40	u32 max;	/* max number of IDs in table */41	spinlock_t lock;42	unsigned long table[];43};44 45static int next_destid = 0;46static int next_comptag = 1;47 48/**49 * rio_destid_alloc - Allocate next available destID for given network50 * @net: RIO network51 *52 * Returns next available device destination ID for the specified RIO network.53 * Marks allocated ID as one in use.54 * Returns RIO_INVALID_DESTID if new destID is not available.55 */56static u16 rio_destid_alloc(struct rio_net *net)57{58	int destid;59	struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;60 61	spin_lock(&idtab->lock);62	destid = find_first_zero_bit(idtab->table, idtab->max);63 64	if (destid < idtab->max) {65		set_bit(destid, idtab->table);66		destid += idtab->start;67	} else68		destid = RIO_INVALID_DESTID;69 70	spin_unlock(&idtab->lock);71	return (u16)destid;72}73 74/**75 * rio_destid_reserve - Reserve the specified destID76 * @net: RIO network77 * @destid: destID to reserve78 *79 * Tries to reserve the specified destID.80 * Returns 0 if successful.81 */82static int rio_destid_reserve(struct rio_net *net, u16 destid)83{84	int oldbit;85	struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;86 87	destid -= idtab->start;88	spin_lock(&idtab->lock);89	oldbit = test_and_set_bit(destid, idtab->table);90	spin_unlock(&idtab->lock);91	return oldbit;92}93 94/**95 * rio_destid_free - free a previously allocated destID96 * @net: RIO network97 * @destid: destID to free98 *99 * Makes the specified destID available for use.100 */101static void rio_destid_free(struct rio_net *net, u16 destid)102{103	struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;104 105	destid -= idtab->start;106	spin_lock(&idtab->lock);107	clear_bit(destid, idtab->table);108	spin_unlock(&idtab->lock);109}110 111/**112 * rio_destid_first - return first destID in use113 * @net: RIO network114 */115static u16 rio_destid_first(struct rio_net *net)116{117	int destid;118	struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;119 120	spin_lock(&idtab->lock);121	destid = find_first_bit(idtab->table, idtab->max);122	if (destid >= idtab->max)123		destid = RIO_INVALID_DESTID;124	else125		destid += idtab->start;126	spin_unlock(&idtab->lock);127	return (u16)destid;128}129 130/**131 * rio_destid_next - return next destID in use132 * @net: RIO network133 * @from: destination ID from which search shall continue134 */135static u16 rio_destid_next(struct rio_net *net, u16 from)136{137	int destid;138	struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;139 140	spin_lock(&idtab->lock);141	destid = find_next_bit(idtab->table, idtab->max, from);142	if (destid >= idtab->max)143		destid = RIO_INVALID_DESTID;144	else145		destid += idtab->start;146	spin_unlock(&idtab->lock);147	return (u16)destid;148}149 150/**151 * rio_get_device_id - Get the base/extended device id for a device152 * @port: RIO master port153 * @destid: Destination ID of device154 * @hopcount: Hopcount to device155 *156 * Reads the base/extended device id from a device. Returns the157 * 8/16-bit device ID.158 */159static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)160{161	u32 result;162 163	rio_mport_read_config_32(port, destid, hopcount, RIO_DID_CSR, &result);164 165	return RIO_GET_DID(port->sys_size, result);166}167 168/**169 * rio_set_device_id - Set the base/extended device id for a device170 * @port: RIO master port171 * @destid: Destination ID of device172 * @hopcount: Hopcount to device173 * @did: Device ID value to be written174 *175 * Writes the base/extended device id from a device.176 */177static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did)178{179	rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR,180				  RIO_SET_DID(port->sys_size, did));181}182 183/**184 * rio_clear_locks- Release all host locks and signal enumeration complete185 * @net: RIO network to run on186 *187 * Marks the component tag CSR on each device with the enumeration188 * complete flag. When complete, it then release the host locks on189 * each device. Returns 0 on success or %-EINVAL on failure.190 */191static int rio_clear_locks(struct rio_net *net)192{193	struct rio_mport *port = net->hport;194	struct rio_dev *rdev;195	u32 result;196	int ret = 0;197 198	/* Release host device id locks */199	rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,200				  port->host_deviceid);201	rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result);202	if ((result & 0xffff) != 0xffff) {203		printk(KERN_INFO204		       "RIO: badness when releasing host lock on master port, result %8.8x\n",205		       result);206		ret = -EINVAL;207	}208	list_for_each_entry(rdev, &net->devices, net_list) {209		rio_write_config_32(rdev, RIO_HOST_DID_LOCK_CSR,210				    port->host_deviceid);211		rio_read_config_32(rdev, RIO_HOST_DID_LOCK_CSR, &result);212		if ((result & 0xffff) != 0xffff) {213			printk(KERN_INFO214			       "RIO: badness when releasing host lock on vid %4.4x did %4.4x\n",215			       rdev->vid, rdev->did);216			ret = -EINVAL;217		}218 219		/* Mark device as discovered and enable master */220		rio_read_config_32(rdev,221				   rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,222				   &result);223		result |= RIO_PORT_GEN_DISCOVERED | RIO_PORT_GEN_MASTER;224		rio_write_config_32(rdev,225				    rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,226				    result);227	}228 229	return ret;230}231 232/**233 * rio_enum_host- Set host lock and initialize host destination ID234 * @port: Master port to issue transaction235 *236 * Sets the local host master port lock and destination ID register237 * with the host device ID value. The host device ID value is provided238 * by the platform. Returns %0 on success or %-1 on failure.239 */240static int rio_enum_host(struct rio_mport *port)241{242	u32 result;243 244	/* Set master port host device id lock */245	rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,246				  port->host_deviceid);247 248	rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result);249	if ((result & 0xffff) != port->host_deviceid)250		return -1;251 252	/* Set master port destid and init destid ctr */253	rio_local_set_device_id(port, port->host_deviceid);254	return 0;255}256 257/**258 * rio_device_has_destid- Test if a device contains a destination ID register259 * @port: Master port to issue transaction260 * @src_ops: RIO device source operations261 * @dst_ops: RIO device destination operations262 *263 * Checks the provided @src_ops and @dst_ops for the necessary transaction264 * capabilities that indicate whether or not a device will implement a265 * destination ID register. Returns 1 if true or 0 if false.266 */267static int rio_device_has_destid(struct rio_mport *port, int src_ops,268				 int dst_ops)269{270	u32 mask = RIO_OPS_READ | RIO_OPS_WRITE | RIO_OPS_ATOMIC_TST_SWP | RIO_OPS_ATOMIC_INC | RIO_OPS_ATOMIC_DEC | RIO_OPS_ATOMIC_SET | RIO_OPS_ATOMIC_CLR;271 272	return !!((src_ops | dst_ops) & mask);273}274 275/**276 * rio_release_dev- Frees a RIO device struct277 * @dev: LDM device associated with a RIO device struct278 *279 * Gets the RIO device struct associated a RIO device struct.280 * The RIO device struct is freed.281 */282static void rio_release_dev(struct device *dev)283{284	struct rio_dev *rdev;285 286	rdev = to_rio_dev(dev);287	kfree(rdev);288}289 290/**291 * rio_is_switch- Tests if a RIO device has switch capabilities292 * @rdev: RIO device293 *294 * Gets the RIO device Processing Element Features register295 * contents and tests for switch capabilities. Returns 1 if296 * the device is a switch or 0 if it is not a switch.297 * The RIO device struct is freed.298 */299static int rio_is_switch(struct rio_dev *rdev)300{301	if (rdev->pef & RIO_PEF_SWITCH)302		return 1;303	return 0;304}305 306/**307 * rio_setup_device- Allocates and sets up a RIO device308 * @net: RIO network309 * @port: Master port to send transactions310 * @destid: Current destination ID311 * @hopcount: Current hopcount312 * @do_enum: Enumeration/Discovery mode flag313 *314 * Allocates a RIO device and configures fields based on configuration315 * space contents. If device has a destination ID register, a destination316 * ID is either assigned in enumeration mode or read from configuration317 * space in discovery mode.  If the device has switch capabilities, then318 * a switch is allocated and configured appropriately. Returns a pointer319 * to a RIO device on success or NULL on failure.320 *321 */322static struct rio_dev *rio_setup_device(struct rio_net *net,323					struct rio_mport *port, u16 destid,324					u8 hopcount, int do_enum)325{326	int ret = 0;327	struct rio_dev *rdev;328	struct rio_switch *rswitch = NULL;329	int result, rdid;330	size_t size;331	u32 swpinfo = 0;332 333	size = sizeof(*rdev);334	if (rio_mport_read_config_32(port, destid, hopcount,335				     RIO_PEF_CAR, &result))336		return NULL;337 338	if (result & (RIO_PEF_SWITCH | RIO_PEF_MULTIPORT)) {339		rio_mport_read_config_32(port, destid, hopcount,340					 RIO_SWP_INFO_CAR, &swpinfo);341		if (result & RIO_PEF_SWITCH)342			size += struct_size(rswitch, nextdev, RIO_GET_TOTAL_PORTS(swpinfo));343	}344 345	rdev = kzalloc(size, GFP_KERNEL);346	if (!rdev)347		return NULL;348 349	rdev->net = net;350	rdev->pef = result;351	rdev->swpinfo = swpinfo;352	rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_ID_CAR,353				 &result);354	rdev->did = result >> 16;355	rdev->vid = result & 0xffff;356	rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_INFO_CAR,357				 &rdev->device_rev);358	rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_ID_CAR,359				 &result);360	rdev->asm_did = result >> 16;361	rdev->asm_vid = result & 0xffff;362	rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_INFO_CAR,363				 &result);364	rdev->asm_rev = result >> 16;365	if (rdev->pef & RIO_PEF_EXT_FEATURES) {366		rdev->efptr = result & 0xffff;367		rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid,368						hopcount, &rdev->phys_rmap);369		pr_debug("RIO: %s Register Map %d device\n",370			 __func__, rdev->phys_rmap);371 372		rdev->em_efptr = rio_mport_get_feature(port, 0, destid,373						hopcount, RIO_EFB_ERR_MGMNT);374		if (!rdev->em_efptr)375			rdev->em_efptr = rio_mport_get_feature(port, 0, destid,376						hopcount, RIO_EFB_ERR_MGMNT_HS);377	}378 379	rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,380				 &rdev->src_ops);381	rio_mport_read_config_32(port, destid, hopcount, RIO_DST_OPS_CAR,382				 &rdev->dst_ops);383 384	if (do_enum) {385		/* Assign component tag to device */386		if (next_comptag >= 0x10000) {387			pr_err("RIO: Component Tag Counter Overflow\n");388			goto cleanup;389		}390		rio_mport_write_config_32(port, destid, hopcount,391					  RIO_COMPONENT_TAG_CSR, next_comptag);392		rdev->comp_tag = next_comptag++;393		rdev->do_enum = true;394	}  else {395		rio_mport_read_config_32(port, destid, hopcount,396					 RIO_COMPONENT_TAG_CSR,397					 &rdev->comp_tag);398	}399 400	if (rio_device_has_destid(port, rdev->src_ops, rdev->dst_ops)) {401		if (do_enum) {402			rio_set_device_id(port, destid, hopcount, next_destid);403			rdev->destid = next_destid;404			next_destid = rio_destid_alloc(net);405		} else406			rdev->destid = rio_get_device_id(port, destid, hopcount);407 408		rdev->hopcount = 0xff;409	} else {410		/* Switch device has an associated destID which411		 * will be adjusted later412		 */413		rdev->destid = destid;414		rdev->hopcount = hopcount;415	}416 417	/* If a PE has both switch and other functions, show it as a switch */418	if (rio_is_switch(rdev)) {419		rswitch = rdev->rswitch;420		rswitch->port_ok = 0;421		spin_lock_init(&rswitch->lock);422		rswitch->route_table =423			kzalloc(RIO_MAX_ROUTE_ENTRIES(port->sys_size),424				GFP_KERNEL);425		if (!rswitch->route_table)426			goto cleanup;427		/* Initialize switch route table */428		for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES(port->sys_size);429				rdid++)430			rswitch->route_table[rdid] = RIO_INVALID_ROUTE;431		dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id,432			     rdev->comp_tag & RIO_CTAG_UDEVID);433 434		if (do_enum)435			rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0);436	} else {437		if (do_enum)438			/*Enable Input Output Port (transmitter receiver)*/439			rio_enable_rx_tx_port(port, 0, destid, hopcount, 0);440 441		dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id,442			     rdev->comp_tag & RIO_CTAG_UDEVID);443	}444 445	rdev->dev.parent = &net->dev;446	rio_attach_device(rdev);447	rdev->dev.release = rio_release_dev;448	rdev->dma_mask = DMA_BIT_MASK(32);449	rdev->dev.dma_mask = &rdev->dma_mask;450	rdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);451 452	if (rdev->dst_ops & RIO_DST_OPS_DOORBELL)453		rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE],454				   0, 0xffff);455 456	ret = rio_add_device(rdev);457	if (ret) {458		if (rswitch)459			kfree(rswitch->route_table);460		put_device(&rdev->dev);461		return NULL;462	}463 464	rio_dev_get(rdev);465 466	return rdev;467 468cleanup:469	if (rswitch)470		kfree(rswitch->route_table);471 472	kfree(rdev);473	return NULL;474}475 476/**477 * rio_sport_is_active- Tests if a switch port has an active connection.478 * @rdev: RapidIO device object479 * @sp: Switch port number480 *481 * Reads the port error status CSR for a particular switch port to482 * determine if the port has an active link.  Returns483 * %RIO_PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is484 * inactive.485 */486static int487rio_sport_is_active(struct rio_dev *rdev, int sp)488{489	u32 result = 0;490 491	rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, sp),492			   &result);493 494	return result & RIO_PORT_N_ERR_STS_PORT_OK;495}496 497/**498 * rio_get_host_deviceid_lock- Reads the Host Device ID Lock CSR on a device499 * @port: Master port to send transaction500 * @hopcount: Number of hops to the device501 *502 * Used during enumeration to read the Host Device ID Lock CSR on a503 * RIO device. Returns the value of the lock register.504 */505static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)506{507	u32 result;508 509	rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size), hopcount,510				 RIO_HOST_DID_LOCK_CSR, &result);511 512	return (u16) (result & 0xffff);513}514 515/**516 * rio_enum_peer- Recursively enumerate a RIO network through a master port517 * @net: RIO network being enumerated518 * @port: Master port to send transactions519 * @hopcount: Number of hops into the network520 * @prev: Previous RIO device connected to the enumerated one521 * @prev_port: Port on previous RIO device522 *523 * Recursively enumerates a RIO network.  Transactions are sent via the524 * master port passed in @port.525 */526static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,527			 u8 hopcount, struct rio_dev *prev, int prev_port)528{529	struct rio_dev *rdev;530	u32 regval;531	int tmp;532 533	if (rio_mport_chk_dev_access(port,534			RIO_ANY_DESTID(port->sys_size), hopcount)) {535		pr_debug("RIO: device access check failed\n");536		return -1;537	}538 539	if (rio_get_host_deviceid_lock(port, hopcount) == port->host_deviceid) {540		pr_debug("RIO: PE already discovered by this host\n");541		/*542		 * Already discovered by this host. Add it as another543		 * link to the existing device.544		 */545		rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size),546				hopcount, RIO_COMPONENT_TAG_CSR, &regval);547 548		if (regval) {549			rdev = rio_get_comptag((regval & 0xffff), NULL);550 551			if (rdev && prev && rio_is_switch(prev)) {552				pr_debug("RIO: redundant path to %s\n",553					 rio_name(rdev));554				prev->rswitch->nextdev[prev_port] = rdev;555			}556		}557 558		return 0;559	}560 561	/* Attempt to acquire device lock */562	rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),563				  hopcount,564				  RIO_HOST_DID_LOCK_CSR, port->host_deviceid);565	while ((tmp = rio_get_host_deviceid_lock(port, hopcount))566	       < port->host_deviceid) {567		/* Delay a bit */568		mdelay(1);569		/* Attempt to acquire device lock again */570		rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),571					  hopcount,572					  RIO_HOST_DID_LOCK_CSR,573					  port->host_deviceid);574	}575 576	if (rio_get_host_deviceid_lock(port, hopcount) > port->host_deviceid) {577		pr_debug(578		    "RIO: PE locked by a higher priority host...retreating\n");579		return -1;580	}581 582	/* Setup new RIO device */583	rdev = rio_setup_device(net, port, RIO_ANY_DESTID(port->sys_size),584					hopcount, 1);585	if (rdev) {586		rdev->prev = prev;587		if (prev && rio_is_switch(prev))588			prev->rswitch->nextdev[prev_port] = rdev;589	} else590		return -1;591 592	if (rio_is_switch(rdev)) {593		int sw_destid;594		int cur_destid;595		int sw_inport;596		u16 destid;597		int port_num;598 599		sw_inport = RIO_GET_PORT_NUM(rdev->swpinfo);600		rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,601				    port->host_deviceid, sw_inport, 0);602		rdev->rswitch->route_table[port->host_deviceid] = sw_inport;603 604		destid = rio_destid_first(net);605		while (destid != RIO_INVALID_DESTID && destid < next_destid) {606			if (destid != port->host_deviceid) {607				rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,608						    destid, sw_inport, 0);609				rdev->rswitch->route_table[destid] = sw_inport;610			}611			destid = rio_destid_next(net, destid + 1);612		}613		pr_debug(614		    "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",615		    rio_name(rdev), rdev->vid, rdev->did,616		    RIO_GET_TOTAL_PORTS(rdev->swpinfo));617		sw_destid = next_destid;618		for (port_num = 0;619		     port_num < RIO_GET_TOTAL_PORTS(rdev->swpinfo);620		     port_num++) {621			if (sw_inport == port_num) {622				rio_enable_rx_tx_port(port, 0,623					      RIO_ANY_DESTID(port->sys_size),624					      hopcount, port_num);625				rdev->rswitch->port_ok |= (1 << port_num);626				continue;627			}628 629			cur_destid = next_destid;630 631			if (rio_sport_is_active(rdev, port_num)) {632				pr_debug(633				    "RIO: scanning device on port %d\n",634				    port_num);635				rio_enable_rx_tx_port(port, 0,636					      RIO_ANY_DESTID(port->sys_size),637					      hopcount, port_num);638				rdev->rswitch->port_ok |= (1 << port_num);639				rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,640						RIO_ANY_DESTID(port->sys_size),641						port_num, 0);642 643				if (rio_enum_peer(net, port, hopcount + 1,644						  rdev, port_num) < 0)645					return -1;646 647				/* Update routing tables */648				destid = rio_destid_next(net, cur_destid + 1);649				if (destid != RIO_INVALID_DESTID) {650					for (destid = cur_destid;651					     destid < next_destid;) {652						if (destid != port->host_deviceid) {653							rio_route_add_entry(rdev,654								    RIO_GLOBAL_TABLE,655								    destid,656								    port_num,657								    0);658							rdev->rswitch->659								route_table[destid] =660								port_num;661						}662						destid = rio_destid_next(net,663								destid + 1);664					}665				}666			} else {667				/* If switch supports Error Management,668				 * set PORT_LOCKOUT bit for unused port669				 */670				if (rdev->em_efptr)671					rio_set_port_lockout(rdev, port_num, 1);672 673				rdev->rswitch->port_ok &= ~(1 << port_num);674			}675		}676 677		/* Direct Port-write messages to the enumeratiing host */678		if ((rdev->src_ops & RIO_SRC_OPS_PORT_WRITE) &&679		    (rdev->em_efptr)) {680			rio_write_config_32(rdev,681					rdev->em_efptr + RIO_EM_PW_TGT_DEVID,682					(port->host_deviceid << 16) |683					(port->sys_size << 15));684		}685 686		rio_init_em(rdev);687 688		/* Check for empty switch */689		if (next_destid == sw_destid)690			next_destid = rio_destid_alloc(net);691 692		rdev->destid = sw_destid;693	} else694		pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n",695		    rio_name(rdev), rdev->vid, rdev->did);696 697	return 0;698}699 700/**701 * rio_enum_complete- Tests if enumeration of a network is complete702 * @port: Master port to send transaction703 *704 * Tests the PGCCSR discovered bit for non-zero value (enumeration705 * complete flag). Return %1 if enumeration is complete or %0 if706 * enumeration is incomplete.707 */708static int rio_enum_complete(struct rio_mport *port)709{710	u32 regval;711 712	rio_local_read_config_32(port, port->phys_efptr + RIO_PORT_GEN_CTL_CSR,713				 &regval);714	return (regval & RIO_PORT_GEN_DISCOVERED) ? 1 : 0;715}716 717/**718 * rio_disc_peer- Recursively discovers a RIO network through a master port719 * @net: RIO network being discovered720 * @port: Master port to send transactions721 * @destid: Current destination ID in network722 * @hopcount: Number of hops into the network723 * @prev: previous rio_dev724 * @prev_port: previous port number725 *726 * Recursively discovers a RIO network.  Transactions are sent via the727 * master port passed in @port.728 */729static int730rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,731	      u8 hopcount, struct rio_dev *prev, int prev_port)732{733	u8 port_num, route_port;734	struct rio_dev *rdev;735	u16 ndestid;736 737	/* Setup new RIO device */738	if ((rdev = rio_setup_device(net, port, destid, hopcount, 0))) {739		rdev->prev = prev;740		if (prev && rio_is_switch(prev))741			prev->rswitch->nextdev[prev_port] = rdev;742	} else743		return -1;744 745	if (rio_is_switch(rdev)) {746		/* Associated destid is how we accessed this switch */747		rdev->destid = destid;748 749		pr_debug(750		    "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",751		    rio_name(rdev), rdev->vid, rdev->did,752		    RIO_GET_TOTAL_PORTS(rdev->swpinfo));753		for (port_num = 0;754		     port_num < RIO_GET_TOTAL_PORTS(rdev->swpinfo);755		     port_num++) {756			if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num)757				continue;758 759			if (rio_sport_is_active(rdev, port_num)) {760				pr_debug(761				    "RIO: scanning device on port %d\n",762				    port_num);763 764				rio_lock_device(port, destid, hopcount, 1000);765 766				for (ndestid = 0;767				     ndestid < RIO_ANY_DESTID(port->sys_size);768				     ndestid++) {769					rio_route_get_entry(rdev,770							    RIO_GLOBAL_TABLE,771							    ndestid,772							    &route_port, 0);773					if (route_port == port_num)774						break;775				}776 777				if (ndestid == RIO_ANY_DESTID(port->sys_size))778					continue;779				rio_unlock_device(port, destid, hopcount);780				if (rio_disc_peer(net, port, ndestid,781					hopcount + 1, rdev, port_num) < 0)782					return -1;783			}784		}785	} else786		pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n",787		    rio_name(rdev), rdev->vid, rdev->did);788 789	return 0;790}791 792/**793 * rio_mport_is_active- Tests if master port link is active794 * @port: Master port to test795 *796 * Reads the port error status CSR for the master port to797 * determine if the port has an active link.  Returns798 * %RIO_PORT_N_ERR_STS_PORT_OK if the  master port is active799 * or %0 if it is inactive.800 */801static int rio_mport_is_active(struct rio_mport *port)802{803	u32 result = 0;804 805	rio_local_read_config_32(port,806		port->phys_efptr +807			RIO_PORT_N_ERR_STS_CSR(port->index, port->phys_rmap),808		&result);809	return result & RIO_PORT_N_ERR_STS_PORT_OK;810}811 812static void rio_scan_release_net(struct rio_net *net)813{814	pr_debug("RIO-SCAN: %s: net_%d\n", __func__, net->id);815	kfree(net->enum_data);816}817 818static void rio_scan_release_dev(struct device *dev)819{820	struct rio_net *net;821 822	net = to_rio_net(dev);823	pr_debug("RIO-SCAN: %s: net_%d\n", __func__, net->id);824	kfree(net);825}826 827/*828 * rio_scan_alloc_net - Allocate and configure a new RIO network829 * @mport: Master port associated with the RIO network830 * @do_enum: Enumeration/Discovery mode flag831 * @start: logical minimal start id for new net832 *833 * Allocates a new RIO network structure and initializes enumerator-specific834 * part of it (if required).835 * Returns a RIO network pointer on success or %NULL on failure.836 */837static struct rio_net *rio_scan_alloc_net(struct rio_mport *mport,838					  int do_enum, u16 start)839{840	struct rio_net *net;841 842	net = rio_alloc_net(mport);843 844	if (net && do_enum) {845		struct rio_id_table *idtab;846		size_t size;847 848		size = sizeof(struct rio_id_table) +849				BITS_TO_LONGS(850					RIO_MAX_ROUTE_ENTRIES(mport->sys_size)851					) * sizeof(long);852 853		idtab = kzalloc(size, GFP_KERNEL);854 855		if (idtab == NULL) {856			pr_err("RIO: failed to allocate destID table\n");857			rio_free_net(net);858			net = NULL;859		} else {860			net->enum_data = idtab;861			net->release = rio_scan_release_net;862			idtab->start = start;863			idtab->max = RIO_MAX_ROUTE_ENTRIES(mport->sys_size);864			spin_lock_init(&idtab->lock);865		}866	}867 868	if (net) {869		net->id = mport->id;870		net->hport = mport;871		dev_set_name(&net->dev, "rnet_%d", net->id);872		net->dev.parent = &mport->dev;873		net->dev.release = rio_scan_release_dev;874		rio_add_net(net);875	}876 877	return net;878}879 880/**881 * rio_update_route_tables- Updates route tables in switches882 * @net: RIO network to run update on883 *884 * For each enumerated device, ensure that each switch in a system885 * has correct routing entries. Add routes for devices that where886 * unknown during the first enumeration pass through the switch.887 */888static void rio_update_route_tables(struct rio_net *net)889{890	struct rio_dev *rdev, *swrdev;891	struct rio_switch *rswitch;892	u8 sport;893	u16 destid;894 895	list_for_each_entry(rdev, &net->devices, net_list) {896 897		destid = rdev->destid;898 899		list_for_each_entry(rswitch, &net->switches, node) {900 901			if (rio_is_switch(rdev)	&& (rdev->rswitch == rswitch))902				continue;903 904			if (RIO_INVALID_ROUTE == rswitch->route_table[destid]) {905				swrdev = sw_to_rio_dev(rswitch);906 907				/* Skip if destid ends in empty switch*/908				if (swrdev->destid == destid)909					continue;910 911				sport = RIO_GET_PORT_NUM(swrdev->swpinfo);912 913				rio_route_add_entry(swrdev, RIO_GLOBAL_TABLE,914						    destid, sport, 0);915				rswitch->route_table[destid] = sport;916			}917		}918	}919}920 921/**922 * rio_init_em - Initializes RIO Error Management (for switches)923 * @rdev: RIO device924 *925 * For each enumerated switch, call device-specific error management926 * initialization routine (if supplied by the switch driver).927 */928static void rio_init_em(struct rio_dev *rdev)929{930	if (rio_is_switch(rdev) && (rdev->em_efptr) &&931	    rdev->rswitch->ops && rdev->rswitch->ops->em_init) {932		rdev->rswitch->ops->em_init(rdev);933	}934}935 936/**937 * rio_enum_mport- Start enumeration through a master port938 * @mport: Master port to send transactions939 * @flags: Enumeration control flags940 *941 * Starts the enumeration process. If somebody has enumerated our942 * master port device, then give up. If not and we have an active943 * link, then start recursive peer enumeration. Returns %0 if944 * enumeration succeeds or %-EBUSY if enumeration fails.945 */946static int rio_enum_mport(struct rio_mport *mport, u32 flags)947{948	struct rio_net *net = NULL;949	int rc = 0;950 951	printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id,952	       mport->name);953 954	/*955	 * To avoid multiple start requests (repeat enumeration is not supported956	 * by this method) check if enumeration/discovery was performed for this957	 * mport: if mport was added into the list of mports for a net exit958	 * with error.959	 */960	if (mport->nnode.next || mport->nnode.prev)961		return -EBUSY;962 963	/* If somebody else enumerated our master port device, bail. */964	if (rio_enum_host(mport) < 0) {965		printk(KERN_INFO966		       "RIO: master port %d device has been enumerated by a remote host\n",967		       mport->id);968		rc = -EBUSY;969		goto out;970	}971 972	/* If master port has an active link, allocate net and enum peers */973	if (rio_mport_is_active(mport)) {974		net = rio_scan_alloc_net(mport, 1, 0);975		if (!net) {976			printk(KERN_ERR "RIO: failed to allocate new net\n");977			rc = -ENOMEM;978			goto out;979		}980 981		/* reserve mport destID in new net */982		rio_destid_reserve(net, mport->host_deviceid);983 984		/* Enable Input Output Port (transmitter receiver) */985		rio_enable_rx_tx_port(mport, 1, 0, 0, 0);986 987		/* Set component tag for host */988		rio_local_write_config_32(mport, RIO_COMPONENT_TAG_CSR,989					  next_comptag++);990 991		next_destid = rio_destid_alloc(net);992 993		if (rio_enum_peer(net, mport, 0, NULL, 0) < 0) {994			/* A higher priority host won enumeration, bail. */995			printk(KERN_INFO996			       "RIO: master port %d device has lost enumeration to a remote host\n",997			       mport->id);998			rio_clear_locks(net);999			rc = -EBUSY;1000			goto out;1001		}1002		/* free the last allocated destID (unused) */1003		rio_destid_free(net, next_destid);1004		rio_update_route_tables(net);1005		rio_clear_locks(net);1006		rio_pw_enable(mport, 1);1007	} else {1008		printk(KERN_INFO "RIO: master port %d link inactive\n",1009		       mport->id);1010		rc = -EINVAL;1011	}1012 1013      out:1014	return rc;1015}1016 1017/**1018 * rio_build_route_tables- Generate route tables from switch route entries1019 * @net: RIO network to run route tables scan on1020 *1021 * For each switch device, generate a route table by copying existing1022 * route entries from the switch.1023 */1024static void rio_build_route_tables(struct rio_net *net)1025{1026	struct rio_switch *rswitch;1027	struct rio_dev *rdev;1028	int i;1029	u8 sport;1030 1031	list_for_each_entry(rswitch, &net->switches, node) {1032		rdev = sw_to_rio_dev(rswitch);1033 1034		rio_lock_device(net->hport, rdev->destid,1035				rdev->hopcount, 1000);1036		for (i = 0;1037		     i < RIO_MAX_ROUTE_ENTRIES(net->hport->sys_size);1038		     i++) {1039			if (rio_route_get_entry(rdev, RIO_GLOBAL_TABLE,1040						i, &sport, 0) < 0)1041				continue;1042			rswitch->route_table[i] = sport;1043		}1044 1045		rio_unlock_device(net->hport, rdev->destid, rdev->hopcount);1046	}1047}1048 1049/**1050 * rio_disc_mport- Start discovery through a master port1051 * @mport: Master port to send transactions1052 * @flags: discovery control flags1053 *1054 * Starts the discovery process. If we have an active link,1055 * then wait for the signal that enumeration is complete (if wait1056 * is allowed).1057 * When enumeration completion is signaled, start recursive1058 * peer discovery. Returns %0 if discovery succeeds or %-EBUSY1059 * on failure.1060 */1061static int rio_disc_mport(struct rio_mport *mport, u32 flags)1062{1063	struct rio_net *net = NULL;1064	unsigned long to_end;1065 1066	printk(KERN_INFO "RIO: discover master port %d, %s\n", mport->id,1067	       mport->name);1068 1069	/* If master port has an active link, allocate net and discover peers */1070	if (rio_mport_is_active(mport)) {1071		if (rio_enum_complete(mport))1072			goto enum_done;1073		else if (flags & RIO_SCAN_ENUM_NO_WAIT)1074			return -EAGAIN;1075 1076		pr_debug("RIO: wait for enumeration to complete...\n");1077 1078		to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ;1079		while (time_before(jiffies, to_end)) {1080			if (rio_enum_complete(mport))1081				goto enum_done;1082			msleep(10);1083		}1084 1085		pr_debug("RIO: discovery timeout on mport %d %s\n",1086			 mport->id, mport->name);1087		goto bail;1088enum_done:1089		pr_debug("RIO: ... enumeration done\n");1090 1091		net = rio_scan_alloc_net(mport, 0, 0);1092		if (!net) {1093			printk(KERN_ERR "RIO: Failed to allocate new net\n");1094			goto bail;1095		}1096 1097		/* Read DestID assigned by enumerator */1098		rio_local_read_config_32(mport, RIO_DID_CSR,1099					 &mport->host_deviceid);1100		mport->host_deviceid = RIO_GET_DID(mport->sys_size,1101						   mport->host_deviceid);1102 1103		if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size),1104					0, NULL, 0) < 0) {1105			printk(KERN_INFO1106			       "RIO: master port %d device has failed discovery\n",1107			       mport->id);1108			goto bail;1109		}1110 1111		rio_build_route_tables(net);1112	}1113 1114	return 0;1115bail:1116	return -EBUSY;1117}1118 1119static struct rio_scan rio_scan_ops = {1120	.owner = THIS_MODULE,1121	.enumerate = rio_enum_mport,1122	.discover = rio_disc_mport,1123};1124 1125static bool scan;1126module_param(scan, bool, 0);1127MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery "1128			"(default = 0)");1129 1130/**1131 * rio_basic_attach:1132 *1133 * When this enumeration/discovery method is loaded as a module this function1134 * registers its specific enumeration and discover routines for all available1135 * RapidIO mport devices. The "scan" command line parameter controls ability of1136 * the module to start RapidIO enumeration/discovery automatically.1137 *1138 * Returns 0 for success or -EIO if unable to register itself.1139 *1140 * This enumeration/discovery method cannot be unloaded and therefore does not1141 * provide a matching cleanup_module routine.1142 */1143 1144static int __init rio_basic_attach(void)1145{1146	if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops))1147		return -EIO;1148	if (scan)1149		rio_init_mports();1150	return 0;1151}1152 1153late_initcall(rio_basic_attach);1154 1155MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery");1156MODULE_LICENSE("GPL");1157