brintos

brintos / linux-shallow public Read only

0
0
Text · 5.9 KiB · 84a134c Raw
202 lines · c
1// SPDX-License-Identifier: GPL-2.0-only2/*3 * Regulator driver for LP873X PMIC4 *5 * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/6 */7 8#include <linux/bitfield.h>9#include <linux/module.h>10#include <linux/platform_device.h>11#include <linux/regmap.h>12 13#include <linux/mfd/lp873x.h>14 15#define LP873X_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \16			 _delay, _lr, _cr)				\17	[_id] = {							\18		.desc = {						\19			.name			= _name,		\20			.supply_name		= _of "-in",		\21			.id			= _id,			\22			.of_match		= of_match_ptr(_of),	\23			.regulators_node	= of_match_ptr("regulators"),\24			.ops			= &_ops,		\25			.n_voltages		= _n,			\26			.type			= REGULATOR_VOLTAGE,	\27			.owner			= THIS_MODULE,		\28			.vsel_reg		= _vr,			\29			.vsel_mask		= _vm,			\30			.enable_reg		= _er,			\31			.enable_mask		= _em,			\32			.ramp_delay		= _delay,		\33			.linear_ranges		= _lr,			\34			.n_linear_ranges	= ARRAY_SIZE(_lr),	\35			.curr_table	= lp873x_buck_uA,		\36			.n_current_limits = ARRAY_SIZE(lp873x_buck_uA),	\37			.csel_reg	= (_cr),			\38			.csel_mask	= LP873X_BUCK0_CTRL_2_BUCK0_ILIM,\39		},							\40		.ctrl2_reg = _cr,					\41	}42 43struct lp873x_regulator {44	struct regulator_desc desc;45	unsigned int ctrl2_reg;46};47 48static const struct lp873x_regulator regulators[];49 50static const struct linear_range buck0_buck1_ranges[] = {51	REGULATOR_LINEAR_RANGE(0, 0x0, 0x13, 0),52	REGULATOR_LINEAR_RANGE(700000, 0x14, 0x17, 10000),53	REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000),54	REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),55};56 57static const struct linear_range ldo0_ldo1_ranges[] = {58	REGULATOR_LINEAR_RANGE(800000, 0x0, 0x19, 100000),59};60 61static const unsigned int lp873x_buck_ramp_delay[] = {62	30000, 15000, 10000, 7500, 3800, 1900, 940, 47063};64 65/* LP873X BUCK current limit */66static const unsigned int lp873x_buck_uA[] = {67	1500000, 2000000, 2500000, 3000000, 3500000, 4000000,68};69 70static int lp873x_buck_set_ramp_delay(struct regulator_dev *rdev,71				      int ramp_delay)72{73	int id = rdev_get_id(rdev);74	struct lp873x *lp873 = rdev_get_drvdata(rdev);75	unsigned int reg;76	int ret;77 78	if (ramp_delay <= 470)79		reg = 7;80	else if (ramp_delay <= 940)81		reg = 6;82	else if (ramp_delay <= 1900)83		reg = 5;84	else if (ramp_delay <= 3800)85		reg = 4;86	else if (ramp_delay <= 7500)87		reg = 3;88	else if (ramp_delay <= 10000)89		reg = 2;90	else if (ramp_delay <= 15000)91		reg = 1;92	else93		reg = 0;94 95	ret = regmap_update_bits(lp873->regmap, regulators[id].ctrl2_reg,96				 LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE,97				 FIELD_PREP(LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE, reg));98	if (ret) {99		dev_err(lp873->dev, "SLEW RATE write failed: %d\n", ret);100		return ret;101	}102 103	rdev->constraints->ramp_delay = lp873x_buck_ramp_delay[reg];104 105	return 0;106}107 108/* Operations permitted on BUCK0, BUCK1 */109static const struct regulator_ops lp873x_buck01_ops = {110	.is_enabled		= regulator_is_enabled_regmap,111	.enable			= regulator_enable_regmap,112	.disable		= regulator_disable_regmap,113	.get_voltage_sel	= regulator_get_voltage_sel_regmap,114	.set_voltage_sel	= regulator_set_voltage_sel_regmap,115	.list_voltage		= regulator_list_voltage_linear_range,116	.map_voltage		= regulator_map_voltage_linear_range,117	.set_voltage_time_sel	= regulator_set_voltage_time_sel,118	.set_ramp_delay		= lp873x_buck_set_ramp_delay,119	.set_current_limit	= regulator_set_current_limit_regmap,120	.get_current_limit	= regulator_get_current_limit_regmap,121};122 123/* Operations permitted on LDO0 and LDO1 */124static const struct regulator_ops lp873x_ldo01_ops = {125	.is_enabled		= regulator_is_enabled_regmap,126	.enable			= regulator_enable_regmap,127	.disable		= regulator_disable_regmap,128	.get_voltage_sel	= regulator_get_voltage_sel_regmap,129	.set_voltage_sel	= regulator_set_voltage_sel_regmap,130	.list_voltage		= regulator_list_voltage_linear_range,131	.map_voltage		= regulator_map_voltage_linear_range,132};133 134static const struct lp873x_regulator regulators[] = {135	LP873X_REGULATOR("BUCK0", LP873X_BUCK_0, "buck0", lp873x_buck01_ops,136			 256, LP873X_REG_BUCK0_VOUT,137			 LP873X_BUCK0_VOUT_BUCK0_VSET, LP873X_REG_BUCK0_CTRL_1,138			 LP873X_BUCK0_CTRL_1_BUCK0_EN, 10000,139			 buck0_buck1_ranges, LP873X_REG_BUCK0_CTRL_2),140	LP873X_REGULATOR("BUCK1", LP873X_BUCK_1, "buck1", lp873x_buck01_ops,141			 256, LP873X_REG_BUCK1_VOUT,142			 LP873X_BUCK1_VOUT_BUCK1_VSET, LP873X_REG_BUCK1_CTRL_1,143			 LP873X_BUCK1_CTRL_1_BUCK1_EN, 10000,144			 buck0_buck1_ranges, LP873X_REG_BUCK1_CTRL_2),145	LP873X_REGULATOR("LDO0", LP873X_LDO_0, "ldo0", lp873x_ldo01_ops, 26,146			 LP873X_REG_LDO0_VOUT, LP873X_LDO0_VOUT_LDO0_VSET,147			 LP873X_REG_LDO0_CTRL,148			 LP873X_LDO0_CTRL_LDO0_EN, 0, ldo0_ldo1_ranges, 0xFF),149	LP873X_REGULATOR("LDO1", LP873X_LDO_1, "ldo1", lp873x_ldo01_ops, 26,150			 LP873X_REG_LDO1_VOUT, LP873X_LDO1_VOUT_LDO1_VSET,151			 LP873X_REG_LDO1_CTRL,152			 LP873X_LDO1_CTRL_LDO1_EN, 0, ldo0_ldo1_ranges, 0xFF),153};154 155static int lp873x_regulator_probe(struct platform_device *pdev)156{157	struct lp873x *lp873 = dev_get_drvdata(pdev->dev.parent);158	struct regulator_config config = { };159	struct regulator_dev *rdev;160	int i;161 162	platform_set_drvdata(pdev, lp873);163 164	config.dev = &pdev->dev;165	config.dev->of_node = lp873->dev->of_node;166	config.driver_data = lp873;167	config.regmap = lp873->regmap;168 169	for (i = 0; i < ARRAY_SIZE(regulators); i++) {170		rdev = devm_regulator_register(&pdev->dev, &regulators[i].desc,171					       &config);172		if (IS_ERR(rdev)) {173			dev_err(lp873->dev, "failed to register %s regulator\n",174				pdev->name);175			return PTR_ERR(rdev);176		}177	}178 179	return 0;180}181 182static const struct platform_device_id lp873x_regulator_id_table[] = {183	{ "lp873x-regulator", },184	{ /* sentinel */ }185};186MODULE_DEVICE_TABLE(platform, lp873x_regulator_id_table);187 188static struct platform_driver lp873x_regulator_driver = {189	.driver = {190		.name = "lp873x-pmic",191		.probe_type = PROBE_PREFER_ASYNCHRONOUS,192	},193	.probe = lp873x_regulator_probe,194	.id_table = lp873x_regulator_id_table,195};196module_platform_driver(lp873x_regulator_driver);197 198MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");199MODULE_DESCRIPTION("LP873X voltage regulator driver");200MODULE_ALIAS("platform:lp873x-pmic");201MODULE_LICENSE("GPL v2");202