brintos

brintos / linux-shallow public Read only

0
0
Text · 3.2 KiB · a09c6ae Raw
117 lines · c
1// SPDX-License-Identifier: GPL-2.0-only2/*3 * Driver for TPS61050/61052 boost converters, typically used for white LEDs4 * or audio amplifiers.5 *6 * Copyright (C) 2011 ST-Ericsson SA7 * Written on behalf of Linaro for ST-Ericsson8 *9 * Author: Linus Walleij <linus.walleij@linaro.org>10 */11 12#include <linux/module.h>13#include <linux/kernel.h>14#include <linux/init.h>15#include <linux/err.h>16#include <linux/regmap.h>17#include <linux/platform_device.h>18#include <linux/regulator/driver.h>19#include <linux/mfd/core.h>20#include <linux/mfd/tps6105x.h>21 22static const unsigned int tps6105x_voltages[] = {23	4500000,24	5000000,25	5250000,26	5000000, /* There is an additional 5V */27};28 29static const struct regulator_ops tps6105x_regulator_ops = {30	.enable		= regulator_enable_regmap,31	.disable	= regulator_disable_regmap,32	.is_enabled	= regulator_is_enabled_regmap,33	.get_voltage_sel = regulator_get_voltage_sel_regmap,34	.set_voltage_sel = regulator_set_voltage_sel_regmap,35	.list_voltage	= regulator_list_voltage_table,36};37 38static const struct regulator_desc tps6105x_regulator_desc = {39	.name		= "tps6105x-boost",40	.of_match	= of_match_ptr("regulator"),41	.ops		= &tps6105x_regulator_ops,42	.type		= REGULATOR_VOLTAGE,43	.id		= 0,44	.owner		= THIS_MODULE,45	.n_voltages	= ARRAY_SIZE(tps6105x_voltages),46	.volt_table	= tps6105x_voltages,47	.vsel_reg	= TPS6105X_REG_0,48	.vsel_mask	= TPS6105X_REG0_VOLTAGE_MASK,49	.enable_reg	= TPS6105X_REG_0,50	.enable_mask	= TPS6105X_REG0_MODE_MASK,51	.enable_val	= TPS6105X_REG0_MODE_VOLTAGE <<52			  TPS6105X_REG0_MODE_SHIFT,53};54 55/*56 * Registers the chip as a voltage regulator57 */58static int tps6105x_regulator_probe(struct platform_device *pdev)59{60	struct tps6105x *tps6105x = dev_get_platdata(&pdev->dev);61	struct tps6105x_platform_data *pdata = tps6105x->pdata;62	struct regulator_config config = { };63	int ret;64 65	/* This instance is not set for regulator mode so bail out */66	if (pdata->mode != TPS6105X_MODE_VOLTAGE) {67		dev_info(&pdev->dev,68			"chip not in voltage mode mode, exit probe\n");69		return 0;70	}71 72	config.dev = &tps6105x->client->dev;73	config.init_data = pdata->regulator_data;74	config.driver_data = tps6105x;75	config.of_node = pdev->dev.parent->of_node;76	config.regmap = tps6105x->regmap;77 78	/* Register regulator with framework */79	tps6105x->regulator = devm_regulator_register(&pdev->dev,80						      &tps6105x_regulator_desc,81						      &config);82	if (IS_ERR(tps6105x->regulator)) {83		ret = PTR_ERR(tps6105x->regulator);84		dev_err(&tps6105x->client->dev,85			"failed to register regulator\n");86		return ret;87	}88	platform_set_drvdata(pdev, tps6105x);89 90	return 0;91}92 93static struct platform_driver tps6105x_regulator_driver = {94	.driver = {95		.name  = "tps6105x-regulator",96		.probe_type = PROBE_PREFER_ASYNCHRONOUS,97	},98	.probe = tps6105x_regulator_probe,99};100 101static __init int tps6105x_regulator_init(void)102{103	return platform_driver_register(&tps6105x_regulator_driver);104}105subsys_initcall(tps6105x_regulator_init);106 107static __exit void tps6105x_regulator_exit(void)108{109	platform_driver_unregister(&tps6105x_regulator_driver);110}111module_exit(tps6105x_regulator_exit);112 113MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");114MODULE_DESCRIPTION("TPS6105x regulator driver");115MODULE_LICENSE("GPL v2");116MODULE_ALIAS("platform:tps6105x-regulator");117