brintos

brintos / linux-shallow public Read only

0
0
Text · 13.5 KiB · be6a670 Raw
514 lines · c
1// SPDX-License-Identifier: GPL-2.0-only2/*3 * tps62360.c -- TI tps623604 *5 * Driver for processor core supply tps62360, tps62361B, tps62362 and tps62363.6 *7 * Copyright (c) 2012, NVIDIA Corporation.8 *9 * Author: Laxman Dewangan <ldewangan@nvidia.com>10 */11 12#include <linux/kernel.h>13#include <linux/module.h>14#include <linux/init.h>15#include <linux/err.h>16#include <linux/of.h>17#include <linux/of_device.h>18#include <linux/regulator/of_regulator.h>19#include <linux/platform_device.h>20#include <linux/regulator/driver.h>21#include <linux/regulator/machine.h>22#include <linux/regulator/tps62360.h>23#include <linux/gpio/consumer.h>24#include <linux/i2c.h>25#include <linux/slab.h>26#include <linux/regmap.h>27 28/* Register definitions */29#define REG_VSET0		030#define REG_VSET1		131#define REG_VSET2		232#define REG_VSET3		333#define REG_CONTROL		434#define REG_TEMP		535#define REG_RAMPCTRL		636#define REG_CHIPID		837 38#define FORCE_PWM_ENABLE	BIT(7)39 40enum chips {TPS62360, TPS62361, TPS62362, TPS62363};41 42#define TPS62360_BASE_VOLTAGE	77000043#define TPS62360_N_VOLTAGES	6444 45#define TPS62361_BASE_VOLTAGE	50000046#define TPS62361_N_VOLTAGES	12847 48/* tps 62360 chip information */49struct tps62360_chip {50	struct device *dev;51	struct regulator_desc desc;52	struct regulator_dev *rdev;53	struct regmap *regmap;54	struct gpio_desc *vsel0_gpio;55	struct gpio_desc *vsel1_gpio;56	u8 voltage_reg_mask;57	bool en_internal_pulldn;58	bool en_discharge;59	bool valid_gpios;60	int lru_index[4];61	int curr_vset_vsel[4];62	int curr_vset_id;63};64 65/*66 * find_voltage_set_register: Find new voltage configuration register67 * (VSET) id.68 * The finding of the new VSET register will be based on the LRU mechanism.69 * Each VSET register will have different voltage configured . This70 * Function will look if any of the VSET register have requested voltage set71 * or not.72 *     - If it is already there then it will make that register as most73 *       recently used and return as found so that caller need not to set74 *       the VSET register but need to set the proper gpios to select this75 *       VSET register.76 *     - If requested voltage is not found then it will use the least77 *       recently mechanism to get new VSET register for new configuration78 *       and will return not_found so that caller need to set new VSET79 *       register and then gpios (both).80 */81static bool find_voltage_set_register(struct tps62360_chip *tps,82		int req_vsel, int *vset_reg_id)83{84	int i;85	bool found = false;86	int new_vset_reg = tps->lru_index[3];87	int found_index = 3;88 89	for (i = 0; i < 4; ++i) {90		if (tps->curr_vset_vsel[tps->lru_index[i]] == req_vsel) {91			new_vset_reg = tps->lru_index[i];92			found_index = i;93			found = true;94			goto update_lru_index;95		}96	}97 98update_lru_index:99	for (i = found_index; i > 0; i--)100		tps->lru_index[i] = tps->lru_index[i - 1];101 102	tps->lru_index[0] = new_vset_reg;103	*vset_reg_id = new_vset_reg;104	return found;105}106 107static int tps62360_dcdc_get_voltage_sel(struct regulator_dev *dev)108{109	struct tps62360_chip *tps = rdev_get_drvdata(dev);110	int vsel;111	unsigned int data;112	int ret;113 114	ret = regmap_read(tps->regmap, REG_VSET0 + tps->curr_vset_id, &data);115	if (ret < 0) {116		dev_err(tps->dev, "%s(): register %d read failed with err %d\n",117			__func__, REG_VSET0 + tps->curr_vset_id, ret);118		return ret;119	}120	vsel = (int)data & tps->voltage_reg_mask;121	return vsel;122}123 124static int tps62360_dcdc_set_voltage_sel(struct regulator_dev *dev,125					 unsigned selector)126{127	struct tps62360_chip *tps = rdev_get_drvdata(dev);128	int ret;129	bool found = false;130	int new_vset_id = tps->curr_vset_id;131 132	/*133	 * If gpios are available to select the VSET register then least134	 * recently used register for new configuration.135	 */136	if (tps->valid_gpios)137		found = find_voltage_set_register(tps, selector, &new_vset_id);138 139	if (!found) {140		ret = regmap_update_bits(tps->regmap, REG_VSET0 + new_vset_id,141				tps->voltage_reg_mask, selector);142		if (ret < 0) {143			dev_err(tps->dev,144				"%s(): register %d update failed with err %d\n",145				 __func__, REG_VSET0 + new_vset_id, ret);146			return ret;147		}148		tps->curr_vset_id = new_vset_id;149		tps->curr_vset_vsel[new_vset_id] = selector;150	}151 152	/* Select proper VSET register vio gpios */153	if (tps->valid_gpios) {154		gpiod_set_value_cansleep(tps->vsel0_gpio, new_vset_id & 0x1);155		gpiod_set_value_cansleep(tps->vsel1_gpio,156					(new_vset_id >> 1) & 0x1);157	}158	return 0;159}160 161static int tps62360_set_mode(struct regulator_dev *rdev, unsigned int mode)162{163	struct tps62360_chip *tps = rdev_get_drvdata(rdev);164	int i;165	int val;166	int ret;167 168	/* Enable force PWM mode in FAST mode only. */169	switch (mode) {170	case REGULATOR_MODE_FAST:171		val = FORCE_PWM_ENABLE;172		break;173 174	case REGULATOR_MODE_NORMAL:175		val = 0;176		break;177 178	default:179		return -EINVAL;180	}181 182	if (!tps->valid_gpios) {183		ret = regmap_update_bits(tps->regmap,184			REG_VSET0 + tps->curr_vset_id, FORCE_PWM_ENABLE, val);185		if (ret < 0)186			dev_err(tps->dev,187				"%s(): register %d update failed with err %d\n",188				__func__, REG_VSET0 + tps->curr_vset_id, ret);189		return ret;190	}191 192	/* If gpios are valid then all register set need to be control */193	for (i = 0; i < 4; ++i) {194		ret = regmap_update_bits(tps->regmap,195					REG_VSET0 + i, FORCE_PWM_ENABLE, val);196		if (ret < 0) {197			dev_err(tps->dev,198				"%s(): register %d update failed with err %d\n",199				__func__, REG_VSET0 + i, ret);200			return ret;201		}202	}203	return ret;204}205 206static unsigned int tps62360_get_mode(struct regulator_dev *rdev)207{208	struct tps62360_chip *tps = rdev_get_drvdata(rdev);209	unsigned int data;210	int ret;211 212	ret = regmap_read(tps->regmap, REG_VSET0 + tps->curr_vset_id, &data);213	if (ret < 0) {214		dev_err(tps->dev, "%s(): register %d read failed with err %d\n",215			__func__, REG_VSET0 + tps->curr_vset_id, ret);216		return ret;217	}218	return (data & FORCE_PWM_ENABLE) ?219				REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;220}221 222static const struct regulator_ops tps62360_dcdc_ops = {223	.get_voltage_sel	= tps62360_dcdc_get_voltage_sel,224	.set_voltage_sel	= tps62360_dcdc_set_voltage_sel,225	.list_voltage		= regulator_list_voltage_linear,226	.map_voltage		= regulator_map_voltage_linear,227	.set_voltage_time_sel	= regulator_set_voltage_time_sel,228	.set_mode		= tps62360_set_mode,229	.get_mode		= tps62360_get_mode,230};231 232static int tps62360_init_dcdc(struct tps62360_chip *tps,233		struct tps62360_regulator_platform_data *pdata)234{235	int ret;236	unsigned int ramp_ctrl;237 238	/* Initialize internal pull up/down control */239	if (tps->en_internal_pulldn)240		ret = regmap_write(tps->regmap, REG_CONTROL, 0xE0);241	else242		ret = regmap_write(tps->regmap, REG_CONTROL, 0x0);243	if (ret < 0) {244		dev_err(tps->dev,245			"%s(): register %d write failed with err %d\n",246			__func__, REG_CONTROL, ret);247		return ret;248	}249 250	/* Reset output discharge path to reduce power consumption */251	ret = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), 0);252	if (ret < 0) {253		dev_err(tps->dev,254			"%s(): register %d update failed with err %d\n",255			__func__, REG_RAMPCTRL, ret);256		return ret;257	}258 259	/* Get ramp value from ramp control register */260	ret = regmap_read(tps->regmap, REG_RAMPCTRL, &ramp_ctrl);261	if (ret < 0) {262		dev_err(tps->dev,263			"%s(): register %d read failed with err %d\n",264			__func__, REG_RAMPCTRL, ret);265		return ret;266	}267	ramp_ctrl = (ramp_ctrl >> 5) & 0x7;268 269	/* ramp mV/us = 32/(2^ramp_ctrl) */270	tps->desc.ramp_delay = DIV_ROUND_UP(32000, BIT(ramp_ctrl));271	return ret;272}273 274static const struct regmap_config tps62360_regmap_config = {275	.reg_bits		= 8,276	.val_bits		= 8,277	.max_register		= REG_CHIPID,278	.cache_type		= REGCACHE_MAPLE,279};280 281static struct tps62360_regulator_platform_data *282	of_get_tps62360_platform_data(struct device *dev,283				      const struct regulator_desc *desc)284{285	struct tps62360_regulator_platform_data *pdata;286	struct device_node *np = dev->of_node;287 288	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);289	if (!pdata)290		return NULL;291 292	pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node,293							  desc);294	if (!pdata->reg_init_data) {295		dev_err(dev, "Not able to get OF regulator init data\n");296		return NULL;297	}298 299	pdata->vsel0_def_state = of_property_read_bool(np, "ti,vsel0-state-high");300	pdata->vsel1_def_state = of_property_read_bool(np, "ti,vsel1-state-high");301	pdata->en_internal_pulldn = of_property_read_bool(np, "ti,enable-pull-down");302	pdata->en_discharge = of_property_read_bool(np, "ti,enable-vout-discharge");303 304	return pdata;305}306 307#if defined(CONFIG_OF)308static const struct of_device_id tps62360_of_match[] = {309	 { .compatible = "ti,tps62360", .data = (void *)TPS62360},310	 { .compatible = "ti,tps62361", .data = (void *)TPS62361},311	 { .compatible = "ti,tps62362", .data = (void *)TPS62362},312	 { .compatible = "ti,tps62363", .data = (void *)TPS62363},313	{},314};315MODULE_DEVICE_TABLE(of, tps62360_of_match);316#endif317 318static int tps62360_probe(struct i2c_client *client)319{320	const struct i2c_device_id *id = i2c_client_get_device_id(client);321	struct regulator_config config = { };322	struct tps62360_regulator_platform_data *pdata;323	struct regulator_dev *rdev;324	struct tps62360_chip *tps;325	int ret;326	int i;327	int chip_id;328	int gpio_flags;329 330	pdata = dev_get_platdata(&client->dev);331 332	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);333	if (!tps)334		return -ENOMEM;335 336	tps->desc.name = client->name;337	tps->desc.id = 0;338	tps->desc.ops = &tps62360_dcdc_ops;339	tps->desc.type = REGULATOR_VOLTAGE;340	tps->desc.owner = THIS_MODULE;341	tps->desc.uV_step = 10000;342 343	if (client->dev.of_node) {344		const struct of_device_id *match;345		match = of_match_device(of_match_ptr(tps62360_of_match),346				&client->dev);347		if (!match) {348			dev_err(&client->dev, "Error: No device match found\n");349			return -ENODEV;350		}351		chip_id = (int)(long)match->data;352		if (!pdata)353			pdata = of_get_tps62360_platform_data(&client->dev,354							      &tps->desc);355	} else if (id) {356		chip_id = id->driver_data;357	} else {358		dev_err(&client->dev, "No device tree match or id table match found\n");359		return -ENODEV;360	}361 362	if (!pdata) {363		dev_err(&client->dev, "%s(): Platform data not found\n",364						__func__);365		return -EIO;366	}367 368	tps->en_discharge = pdata->en_discharge;369	tps->en_internal_pulldn = pdata->en_internal_pulldn;370	tps->dev = &client->dev;371 372	switch (chip_id) {373	case TPS62360:374	case TPS62362:375		tps->desc.min_uV = TPS62360_BASE_VOLTAGE;376		tps->voltage_reg_mask = 0x3F;377		tps->desc.n_voltages = TPS62360_N_VOLTAGES;378		break;379	case TPS62361:380	case TPS62363:381		tps->desc.min_uV = TPS62361_BASE_VOLTAGE;382		tps->voltage_reg_mask = 0x7F;383		tps->desc.n_voltages = TPS62361_N_VOLTAGES;384		break;385	default:386		return -ENODEV;387	}388 389	tps->regmap = devm_regmap_init_i2c(client, &tps62360_regmap_config);390	if (IS_ERR(tps->regmap)) {391		ret = PTR_ERR(tps->regmap);392		dev_err(&client->dev,393			"%s(): regmap allocation failed with err %d\n",394			__func__, ret);395		return ret;396	}397	i2c_set_clientdata(client, tps);398 399	tps->curr_vset_id = (pdata->vsel1_def_state & 1) * 2 +400				(pdata->vsel0_def_state & 1);401	tps->lru_index[0] = tps->curr_vset_id;402	tps->valid_gpios = false;403 404	gpio_flags = (pdata->vsel0_def_state) ?405			GPIOD_OUT_HIGH : GPIOD_OUT_LOW;406	tps->vsel0_gpio = devm_gpiod_get_optional(&client->dev, "vsel0", gpio_flags);407	if (IS_ERR(tps->vsel0_gpio)) {408		dev_err(&client->dev,409			"%s(): Could not obtain vsel0 GPIO: %ld\n",410			__func__, PTR_ERR(tps->vsel0_gpio));411		return PTR_ERR(tps->vsel0_gpio);412	}413 414	gpio_flags = (pdata->vsel1_def_state) ?415			GPIOD_OUT_HIGH : GPIOD_OUT_LOW;416	tps->vsel1_gpio = devm_gpiod_get_optional(&client->dev, "vsel1", gpio_flags);417	if (IS_ERR(tps->vsel1_gpio)) {418		dev_err(&client->dev,419			"%s(): Could not obtain vsel1 GPIO: %ld\n",420			__func__, PTR_ERR(tps->vsel1_gpio));421		return PTR_ERR(tps->vsel1_gpio);422	}423 424	if (tps->vsel0_gpio != NULL && tps->vsel1_gpio != NULL) {425		tps->valid_gpios = true;426 427		/*428		 * Initialize the lru index with vset_reg id429		 * The index 0 will be most recently used and430		 * set with the tps->curr_vset_id */431		for (i = 0; i < 4; ++i)432			tps->lru_index[i] = i;433		tps->lru_index[0] = tps->curr_vset_id;434		tps->lru_index[tps->curr_vset_id] = 0;435	}436 437	ret = tps62360_init_dcdc(tps, pdata);438	if (ret < 0) {439		dev_err(tps->dev, "%s(): Init failed with err = %d\n",440				__func__, ret);441		return ret;442	}443 444	config.dev = &client->dev;445	config.init_data = pdata->reg_init_data;446	config.driver_data = tps;447	config.of_node = client->dev.of_node;448 449	/* Register the regulators */450	rdev = devm_regulator_register(&client->dev, &tps->desc, &config);451	if (IS_ERR(rdev)) {452		dev_err(tps->dev,453			"%s(): regulator register failed with err %s\n",454			__func__, id->name);455		return PTR_ERR(rdev);456	}457 458	tps->rdev = rdev;459	return 0;460}461 462static void tps62360_shutdown(struct i2c_client *client)463{464	struct tps62360_chip *tps = i2c_get_clientdata(client);465	int st;466 467	if (!tps->en_discharge)468		return;469 470	/* Configure the output discharge path */471	st = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), BIT(2));472	if (st < 0)473		dev_err(tps->dev,474			"%s(): register %d update failed with err %d\n",475			__func__, REG_RAMPCTRL, st);476}477 478static const struct i2c_device_id tps62360_id[] = {479	{.name = "tps62360", .driver_data = TPS62360},480	{.name = "tps62361", .driver_data = TPS62361},481	{.name = "tps62362", .driver_data = TPS62362},482	{.name = "tps62363", .driver_data = TPS62363},483	{},484};485 486MODULE_DEVICE_TABLE(i2c, tps62360_id);487 488static struct i2c_driver tps62360_i2c_driver = {489	.driver = {490		.name = "tps62360",491		.probe_type = PROBE_PREFER_ASYNCHRONOUS,492		.of_match_table = of_match_ptr(tps62360_of_match),493	},494	.probe = tps62360_probe,495	.shutdown = tps62360_shutdown,496	.id_table = tps62360_id,497};498 499static int __init tps62360_init(void)500{501	return i2c_add_driver(&tps62360_i2c_driver);502}503subsys_initcall(tps62360_init);504 505static void __exit tps62360_cleanup(void)506{507	i2c_del_driver(&tps62360_i2c_driver);508}509module_exit(tps62360_cleanup);510 511MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");512MODULE_DESCRIPTION("TPS6236x voltage regulator driver");513MODULE_LICENSE("GPL v2");514