112 lines · c
1/*2 * Data structures and definitions for the CAM system.3 *4 * Copyright (c) 1997 Justin T. Gibbs.5 * Copyright (c) 2000 Adaptec Inc.6 * All rights reserved.7 *8 * Redistribution and use in source and binary forms, with or without9 * modification, are permitted provided that the following conditions10 * are met:11 * 1. Redistributions of source code must retain the above copyright12 * notice, this list of conditions, and the following disclaimer,13 * without modification.14 * 2. The name of the author may not be used to endorse or promote products15 * derived from this software without specific prior written permission.16 *17 * Alternatively, this software may be distributed under the terms of the18 * GNU General Public License ("GPL").19 *20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE23 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR24 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF30 * SUCH DAMAGE.31 *32 * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/cam.h#15 $33 */34 35#ifndef _AIC7XXX_CAM_H36#define _AIC7XXX_CAM_H 137 38#include <linux/types.h>39 40#define CAM_BUS_WILDCARD ((u_int)~0)41#define CAM_TARGET_WILDCARD ((u_int)~0)42#define CAM_LUN_WILDCARD ((u_int)~0)43 44/* CAM Status field values */45typedef enum {46 CAM_REQ_INPROG, /* CCB request is in progress */47 CAM_REQ_CMP, /* CCB request completed without error */48 CAM_REQ_ABORTED, /* CCB request aborted by the host */49 CAM_UA_ABORT, /* Unable to abort CCB request */50 CAM_REQ_CMP_ERR, /* CCB request completed with an error */51 CAM_BUSY, /* CAM subsystem is busy */52 CAM_REQ_INVALID, /* CCB request was invalid */53 CAM_PATH_INVALID, /* Supplied Path ID is invalid */54 CAM_SEL_TIMEOUT, /* Target Selection Timeout */55 CAM_CMD_TIMEOUT, /* Command timeout */56 CAM_SCSI_STATUS_ERROR, /* SCSI error, look at error code in CCB */57 CAM_SCSI_BUS_RESET, /* SCSI Bus Reset Sent/Received */58 CAM_UNCOR_PARITY, /* Uncorrectable parity error occurred */59 CAM_AUTOSENSE_FAIL, /* Autosense: request sense cmd fail */60 CAM_NO_HBA, /* No HBA Detected Error */61 CAM_DATA_RUN_ERR, /* Data Overrun error */62 CAM_UNEXP_BUSFREE, /* Unexpected Bus Free */63 CAM_SEQUENCE_FAIL, /* Protocol Violation */64 CAM_CCB_LEN_ERR, /* CCB length supplied is inadequate */65 CAM_PROVIDE_FAIL, /* Unable to provide requested capability */66 CAM_BDR_SENT, /* A SCSI BDR msg was sent to target */67 CAM_REQ_TERMIO, /* CCB request terminated by the host */68 CAM_UNREC_HBA_ERROR, /* Unrecoverable Host Bus Adapter Error */69 CAM_REQ_TOO_BIG, /* The request was too large for this host */70 CAM_UA_TERMIO, /* Unable to terminate I/O CCB request */71 CAM_MSG_REJECT_REC, /* Message Reject Received */72 CAM_DEV_NOT_THERE, /* SCSI Device Not Installed/there */73 CAM_RESRC_UNAVAIL, /* Resource Unavailable */74 /*75 * This request should be requeued to preserve76 * transaction ordering. This typically occurs77 * when the SIM recognizes an error that should78 * freeze the queue and must place additional79 * requests for the target at the sim level80 * back into the XPT queue.81 */82 CAM_REQUEUE_REQ,83 CAM_DEV_QFRZN = 0x40,84 85 CAM_STATUS_MASK = 0x3F86} cam_status;87 88/*89 * Definitions for the asynchronous callback CCB fields.90 */91typedef enum {92 AC_GETDEV_CHANGED = 0x800,/* Getdev info might have changed */93 AC_INQ_CHANGED = 0x400,/* Inquiry info might have changed */94 AC_TRANSFER_NEG = 0x200,/* New transfer settings in effect */95 AC_LOST_DEVICE = 0x100,/* A device went away */96 AC_FOUND_DEVICE = 0x080,/* A new device was found */97 AC_PATH_DEREGISTERED = 0x040,/* A path has de-registered */98 AC_PATH_REGISTERED = 0x020,/* A new path has been registered */99 AC_SENT_BDR = 0x010,/* A BDR message was sent to target */100 AC_SCSI_AEN = 0x008,/* A SCSI AEN has been received */101 AC_UNSOL_RESEL = 0x002,/* Unsolicited reselection occurred */102 AC_BUS_RESET = 0x001 /* A SCSI bus reset occurred */103} ac_code;104 105typedef enum {106 CAM_DIR_IN = DMA_FROM_DEVICE,107 CAM_DIR_OUT = DMA_TO_DEVICE,108 CAM_DIR_NONE = DMA_NONE,109} ccb_flags;110 111#endif /* _AIC7XXX_CAM_H */112