brintos

brintos / linux-shallow public Read only

0
0
Text · 23.1 KiB · 3a25b1a Raw
780 lines · c
1/*2 * This file is provided under a dual BSD/GPLv2 license.  When using or3 * redistributing this file, you may do so under either license.4 *5 * GPL LICENSE SUMMARY6 *7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.8 *9 * This program is free software; you can redistribute it and/or modify10 * it under the terms of version 2 of the GNU General Public License as11 * published by the Free Software Foundation.12 *13 * This program is distributed in the hope that it will be useful, but14 * WITHOUT ANY WARRANTY; without even the implied warranty of15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU16 * General Public License for more details.17 *18 * You should have received a copy of the GNU General Public License19 * along with this program; if not, write to the Free Software20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.21 * The full GNU General Public License is included in this distribution22 * in the file called LICENSE.GPL.23 *24 * BSD LICENSE25 *26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.27 * All rights reserved.28 *29 * Redistribution and use in source and binary forms, with or without30 * modification, are permitted provided that the following conditions31 * are met:32 *33 *   * Redistributions of source code must retain the above copyright34 *     notice, this list of conditions and the following disclaimer.35 *   * Redistributions in binary form must reproduce the above copyright36 *     notice, this list of conditions and the following disclaimer in37 *     the documentation and/or other materials provided with the38 *     distribution.39 *   * Neither the name of Intel Corporation nor the names of its40 *     contributors may be used to endorse or promote products derived41 *     from this software without specific prior written permission.42 *43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.54 */55 56#include <linux/completion.h>57#include <linux/irqflags.h>58#include "sas.h"59#include <scsi/libsas.h>60#include "remote_device.h"61#include "remote_node_context.h"62#include "isci.h"63#include "request.h"64#include "task.h"65#include "host.h"66 67/**68* isci_task_refuse() - complete the request to the upper layer driver in69*     the case where an I/O needs to be completed back in the submit path.70* @ihost: host on which the the request was queued71* @task: request to complete72* @response: response code for the completed task.73* @status: status code for the completed task.74*75*/76static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task,77			     enum service_response response,78			     enum exec_status status)79 80{81	unsigned long flags;82 83	/* Normal notification (task_done) */84	dev_dbg(&ihost->pdev->dev, "%s: task = %p, response=%d, status=%d\n",85		__func__, task, response, status);86 87	spin_lock_irqsave(&task->task_state_lock, flags);88 89	task->task_status.resp = response;90	task->task_status.stat = status;91 92	/* Normal notification (task_done) */93	task->task_state_flags |= SAS_TASK_STATE_DONE;94	task->task_state_flags &= ~SAS_TASK_STATE_PENDING;95	task->lldd_task = NULL;96	spin_unlock_irqrestore(&task->task_state_lock, flags);97 98	task->task_done(task);99}100 101#define for_each_sas_task(num, task) \102	for (; num > 0; num--,\103	     task = list_entry(task->list.next, struct sas_task, list))104 105 106static inline int isci_device_io_ready(struct isci_remote_device *idev,107				       struct sas_task *task)108{109	return idev ? test_bit(IDEV_IO_READY, &idev->flags) ||110		      (test_bit(IDEV_IO_NCQERROR, &idev->flags) &&111		       isci_task_is_ncq_recovery(task))112		    : 0;113}114/**115 * isci_task_execute_task() - This function is one of the SAS Domain Template116 *    functions. This function is called by libsas to send a task down to117 *    hardware.118 * @task: This parameter specifies the SAS task to send.119 * @gfp_flags: This parameter specifies the context of this call.120 *121 * status, zero indicates success.122 */123int isci_task_execute_task(struct sas_task *task, gfp_t gfp_flags)124{125	struct isci_host *ihost = dev_to_ihost(task->dev);126	struct isci_remote_device *idev;127	unsigned long flags;128	enum sci_status status = SCI_FAILURE;129	bool io_ready;130	u16 tag;131 132	spin_lock_irqsave(&ihost->scic_lock, flags);133	idev = isci_lookup_device(task->dev);134	io_ready = isci_device_io_ready(idev, task);135	tag = isci_alloc_tag(ihost);136	spin_unlock_irqrestore(&ihost->scic_lock, flags);137 138	dev_dbg(&ihost->pdev->dev,139		"task: %p, dev: %p idev: %p:%#lx cmd = %p\n",140		task, task->dev, idev, idev ? idev->flags : 0,141		task->uldd_task);142 143	if (!idev) {144		isci_task_refuse(ihost, task, SAS_TASK_UNDELIVERED,145				 SAS_DEVICE_UNKNOWN);146	} else if (!io_ready || tag == SCI_CONTROLLER_INVALID_IO_TAG) {147		/* Indicate QUEUE_FULL so that the scsi midlayer148		 * retries.149		  */150		isci_task_refuse(ihost, task, SAS_TASK_COMPLETE,151				 SAS_QUEUE_FULL);152	} else {153		/* There is a device and it's ready for I/O. */154		spin_lock_irqsave(&task->task_state_lock, flags);155 156		if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {157			/* The I/O was aborted. */158			spin_unlock_irqrestore(&task->task_state_lock, flags);159 160			isci_task_refuse(ihost, task,161					 SAS_TASK_UNDELIVERED,162					 SAS_SAM_STAT_TASK_ABORTED);163		} else {164			struct isci_request *ireq;165 166			/* do common allocation and init of request object. */167			ireq = isci_io_request_from_tag(ihost, task, tag);168			spin_unlock_irqrestore(&task->task_state_lock, flags);169 170			/* build and send the request. */171			/* do common allocation and init of request object. */172			status = isci_request_execute(ihost, idev, task, ireq);173 174			if (status != SCI_SUCCESS) {175				if (test_bit(IDEV_GONE, &idev->flags)) {176					/* Indicate that the device177					 * is gone.178					 */179					isci_task_refuse(ihost, task,180						SAS_TASK_UNDELIVERED,181						SAS_DEVICE_UNKNOWN);182				} else {183					/* Indicate QUEUE_FULL so that184					 * the scsi midlayer retries.185					 * If the request failed for186					 * remote device reasons, it187					 * gets returned as188					 * SAS_TASK_UNDELIVERED next189					 * time through.190					 */191					isci_task_refuse(ihost, task,192						SAS_TASK_COMPLETE,193						SAS_QUEUE_FULL);194				}195			}196		}197	}198 199	if (status != SCI_SUCCESS && tag != SCI_CONTROLLER_INVALID_IO_TAG) {200		spin_lock_irqsave(&ihost->scic_lock, flags);201		/* command never hit the device, so just free202		 * the tci and skip the sequence increment203		 */204		isci_tci_free(ihost, ISCI_TAG_TCI(tag));205		spin_unlock_irqrestore(&ihost->scic_lock, flags);206	}207 208	isci_put_device(idev);209	return 0;210}211 212static struct isci_request *isci_task_request_build(struct isci_host *ihost,213						    struct isci_remote_device *idev,214						    u16 tag, struct isci_tmf *isci_tmf)215{216	enum sci_status status = SCI_FAILURE;217	struct isci_request *ireq = NULL;218	struct domain_device *dev;219 220	dev_dbg(&ihost->pdev->dev,221		"%s: isci_tmf = %p\n", __func__, isci_tmf);222 223	dev = idev->domain_dev;224 225	/* do common allocation and init of request object. */226	ireq = isci_tmf_request_from_tag(ihost, isci_tmf, tag);227	if (!ireq)228		return NULL;229 230	/* let the core do it's construct. */231	status = sci_task_request_construct(ihost, idev, tag,232					     ireq);233 234	if (status != SCI_SUCCESS) {235		dev_warn(&ihost->pdev->dev,236			 "%s: sci_task_request_construct failed - "237			 "status = 0x%x\n",238			 __func__,239			 status);240		return NULL;241	}242 243	/* XXX convert to get this from task->tproto like other drivers */244	if (dev->dev_type == SAS_END_DEVICE) {245		isci_tmf->proto = SAS_PROTOCOL_SSP;246		sci_task_request_construct_ssp(ireq);247	}248 249	return ireq;250}251 252static int isci_task_execute_tmf(struct isci_host *ihost,253				 struct isci_remote_device *idev,254				 struct isci_tmf *tmf, unsigned long timeout_ms)255{256	DECLARE_COMPLETION_ONSTACK(completion);257	enum sci_status status = SCI_FAILURE;258	struct isci_request *ireq;259	int ret = TMF_RESP_FUNC_FAILED;260	unsigned long flags;261	unsigned long timeleft;262	u16 tag;263 264	spin_lock_irqsave(&ihost->scic_lock, flags);265	tag = isci_alloc_tag(ihost);266	spin_unlock_irqrestore(&ihost->scic_lock, flags);267 268	if (tag == SCI_CONTROLLER_INVALID_IO_TAG)269		return ret;270 271	/* sanity check, return TMF_RESP_FUNC_FAILED272	 * if the device is not there and ready.273	 */274	if (!idev ||275	    (!test_bit(IDEV_IO_READY, &idev->flags) &&276	     !test_bit(IDEV_IO_NCQERROR, &idev->flags))) {277		dev_dbg(&ihost->pdev->dev,278			"%s: idev = %p not ready (%#lx)\n",279			__func__,280			idev, idev ? idev->flags : 0);281		goto err_tci;282	} else283		dev_dbg(&ihost->pdev->dev,284			"%s: idev = %p\n",285			__func__, idev);286 287	/* Assign the pointer to the TMF's completion kernel wait structure. */288	tmf->complete = &completion;289	tmf->status = SCI_FAILURE_TIMEOUT;290 291	ireq = isci_task_request_build(ihost, idev, tag, tmf);292	if (!ireq)293		goto err_tci;294 295	spin_lock_irqsave(&ihost->scic_lock, flags);296 297	/* start the TMF io. */298	status = sci_controller_start_task(ihost, idev, ireq);299 300	if (status != SCI_SUCCESS) {301		dev_dbg(&ihost->pdev->dev,302			 "%s: start_io failed - status = 0x%x, request = %p\n",303			 __func__,304			 status,305			 ireq);306		spin_unlock_irqrestore(&ihost->scic_lock, flags);307		goto err_tci;308	}309	spin_unlock_irqrestore(&ihost->scic_lock, flags);310 311	/* The RNC must be unsuspended before the TMF can get a response. */312	isci_remote_device_resume_from_abort(ihost, idev);313 314	/* Wait for the TMF to complete, or a timeout. */315	timeleft = wait_for_completion_timeout(&completion,316					       msecs_to_jiffies(timeout_ms));317 318	if (timeleft == 0) {319		/* The TMF did not complete - this could be because320		 * of an unplug.  Terminate the TMF request now.321		 */322		isci_remote_device_suspend_terminate(ihost, idev, ireq);323	}324 325	isci_print_tmf(ihost, tmf);326 327	if (tmf->status == SCI_SUCCESS)328		ret =  TMF_RESP_FUNC_COMPLETE;329	else if (tmf->status == SCI_FAILURE_IO_RESPONSE_VALID) {330		dev_dbg(&ihost->pdev->dev,331			"%s: tmf.status == "332			"SCI_FAILURE_IO_RESPONSE_VALID\n",333			__func__);334		ret =  TMF_RESP_FUNC_COMPLETE;335	}336	/* Else - leave the default "failed" status alone. */337 338	dev_dbg(&ihost->pdev->dev,339		"%s: completed request = %p\n",340		__func__,341		ireq);342 343	return ret;344 345 err_tci:346	spin_lock_irqsave(&ihost->scic_lock, flags);347	isci_tci_free(ihost, ISCI_TAG_TCI(tag));348	spin_unlock_irqrestore(&ihost->scic_lock, flags);349 350	return ret;351}352 353static void isci_task_build_tmf(struct isci_tmf *tmf,354				enum isci_tmf_function_codes code)355{356	memset(tmf, 0, sizeof(*tmf));357	tmf->tmf_code = code;358}359 360static void isci_task_build_abort_task_tmf(struct isci_tmf *tmf,361					   enum isci_tmf_function_codes code,362					   struct isci_request *old_request)363{364	isci_task_build_tmf(tmf, code);365	tmf->io_tag = old_request->io_tag;366}367 368/*369 * isci_task_send_lu_reset_sas() - This function is called by of the SAS Domain370 *    Template functions.371 * @lun: This parameter specifies the lun to be reset.372 *373 * status, zero indicates success.374 */375static int isci_task_send_lu_reset_sas(376	struct isci_host *isci_host,377	struct isci_remote_device *isci_device,378	u8 *lun)379{380	struct isci_tmf tmf;381	int ret = TMF_RESP_FUNC_FAILED;382 383	dev_dbg(&isci_host->pdev->dev,384		"%s: isci_host = %p, isci_device = %p\n",385		__func__, isci_host, isci_device);386	/* Send the LUN reset to the target.  By the time the call returns,387	 * the TMF has fully exected in the target (in which case the return388	 * value is "TMF_RESP_FUNC_COMPLETE", or the request timed-out (or389	 * was otherwise unable to be executed ("TMF_RESP_FUNC_FAILED").390	 */391	isci_task_build_tmf(&tmf, isci_tmf_ssp_lun_reset);392 393	#define ISCI_LU_RESET_TIMEOUT_MS 2000 /* 2 second timeout. */394	ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, ISCI_LU_RESET_TIMEOUT_MS);395 396	if (ret == TMF_RESP_FUNC_COMPLETE)397		dev_dbg(&isci_host->pdev->dev,398			"%s: %p: TMF_LU_RESET passed\n",399			__func__, isci_device);400	else401		dev_dbg(&isci_host->pdev->dev,402			"%s: %p: TMF_LU_RESET failed (%x)\n",403			__func__, isci_device, ret);404 405	return ret;406}407 408int isci_task_lu_reset(struct domain_device *dev, u8 *lun)409{410	struct isci_host *ihost = dev_to_ihost(dev);411	struct isci_remote_device *idev;412	unsigned long flags;413	int ret = TMF_RESP_FUNC_COMPLETE;414 415	spin_lock_irqsave(&ihost->scic_lock, flags);416	idev = isci_get_device(dev->lldd_dev);417	spin_unlock_irqrestore(&ihost->scic_lock, flags);418 419	dev_dbg(&ihost->pdev->dev,420		"%s: domain_device=%p, isci_host=%p; isci_device=%p\n",421		__func__, dev, ihost, idev);422 423	if (!idev) {424		/* If the device is gone, escalate to I_T_Nexus_Reset. */425		dev_dbg(&ihost->pdev->dev, "%s: No dev\n", __func__);426 427		ret = TMF_RESP_FUNC_FAILED;428		goto out;429	}430 431	/* Suspend the RNC, kill all TCs */432	if (isci_remote_device_suspend_terminate(ihost, idev, NULL)433	    != SCI_SUCCESS) {434		/* The suspend/terminate only fails if isci_get_device fails */435		ret = TMF_RESP_FUNC_FAILED;436		goto out;437	}438	/* All pending I/Os have been terminated and cleaned up. */439	if (!test_bit(IDEV_GONE, &idev->flags)) {440		if (dev_is_sata(dev))441			sas_ata_schedule_reset(dev);442		else443			/* Send the task management part of the reset. */444			ret = isci_task_send_lu_reset_sas(ihost, idev, lun);445	}446 out:447	isci_put_device(idev);448	return ret;449}450 451 452/*	 int (*lldd_clear_nexus_port)(struct asd_sas_port *); */453int isci_task_clear_nexus_port(struct asd_sas_port *port)454{455	return TMF_RESP_FUNC_FAILED;456}457 458 459 460int isci_task_clear_nexus_ha(struct sas_ha_struct *ha)461{462	return TMF_RESP_FUNC_FAILED;463}464 465/* Task Management Functions. Must be called from process context.	 */466 467/**468 * isci_task_abort_task() - This function is one of the SAS Domain Template469 *    functions. This function is called by libsas to abort a specified task.470 * @task: This parameter specifies the SAS task to abort.471 *472 * status, zero indicates success.473 */474int isci_task_abort_task(struct sas_task *task)475{476	struct isci_host *ihost = dev_to_ihost(task->dev);477	DECLARE_COMPLETION_ONSTACK(aborted_io_completion);478	struct isci_request       *old_request = NULL;479	struct isci_remote_device *idev = NULL;480	struct isci_tmf           tmf;481	int                       ret = TMF_RESP_FUNC_FAILED;482	unsigned long             flags;483	int                       target_done_already = 0;484 485	/* Get the isci_request reference from the task.  Note that486	 * this check does not depend on the pending request list487	 * in the device, because tasks driving resets may land here488	 * after completion in the core.489	 */490	spin_lock_irqsave(&ihost->scic_lock, flags);491	spin_lock(&task->task_state_lock);492 493	old_request = task->lldd_task;494 495	/* If task is already done, the request isn't valid */496	if (!(task->task_state_flags & SAS_TASK_STATE_DONE) &&497	    old_request) {498		idev = isci_get_device(task->dev->lldd_dev);499		target_done_already = test_bit(IREQ_COMPLETE_IN_TARGET,500					       &old_request->flags);501	}502	spin_unlock(&task->task_state_lock);503	spin_unlock_irqrestore(&ihost->scic_lock, flags);504 505	dev_warn(&ihost->pdev->dev,506		 "%s: dev = %p (%s%s), task = %p, old_request == %p\n",507		 __func__, idev,508		 (dev_is_sata(task->dev) ? "STP/SATA"509					 : ((dev_is_expander(task->dev->dev_type))510						? "SMP"511						: "SSP")),512		 ((idev) ? ((test_bit(IDEV_GONE, &idev->flags))513			   ? " IDEV_GONE"514			   : "")515			 : " <NULL>"),516		 task, old_request);517 518	/* Device reset conditions signalled in task_state_flags are the519	 * responsbility of libsas to observe at the start of the error520	 * handler thread.521	 */522	if (!idev || !old_request) {523		/* The request has already completed and there524		* is nothing to do here other than to set the task525		* done bit, and indicate that the task abort function526		* was successful.527		*/528		spin_lock_irqsave(&task->task_state_lock, flags);529		task->task_state_flags |= SAS_TASK_STATE_DONE;530		task->task_state_flags &= ~SAS_TASK_STATE_PENDING;531		spin_unlock_irqrestore(&task->task_state_lock, flags);532 533		ret = TMF_RESP_FUNC_COMPLETE;534 535		dev_warn(&ihost->pdev->dev,536			 "%s: abort task not needed for %p\n",537			 __func__, task);538		goto out;539	}540	/* Suspend the RNC, kill the TC */541	if (isci_remote_device_suspend_terminate(ihost, idev, old_request)542	    != SCI_SUCCESS) {543		dev_warn(&ihost->pdev->dev,544			 "%s: isci_remote_device_reset_terminate(dev=%p, "545				 "req=%p, task=%p) failed\n",546			 __func__, idev, old_request, task);547		ret = TMF_RESP_FUNC_FAILED;548		goto out;549	}550	spin_lock_irqsave(&ihost->scic_lock, flags);551 552	if (task->task_proto == SAS_PROTOCOL_SMP ||553	    sas_protocol_ata(task->task_proto) ||554	    target_done_already ||555	    test_bit(IDEV_GONE, &idev->flags)) {556 557		spin_unlock_irqrestore(&ihost->scic_lock, flags);558 559		/* No task to send, so explicitly resume the device here */560		isci_remote_device_resume_from_abort(ihost, idev);561 562		dev_warn(&ihost->pdev->dev,563			 "%s: %s request"564				 " or complete_in_target (%d), "565				 "or IDEV_GONE (%d), thus no TMF\n",566			 __func__,567			 ((task->task_proto == SAS_PROTOCOL_SMP)568			  ? "SMP"569			  : (sas_protocol_ata(task->task_proto)570				? "SATA/STP"571				: "<other>")572			  ),573			 test_bit(IREQ_COMPLETE_IN_TARGET,574				  &old_request->flags),575			 test_bit(IDEV_GONE, &idev->flags));576 577		spin_lock_irqsave(&task->task_state_lock, flags);578		task->task_state_flags &= ~SAS_TASK_STATE_PENDING;579		task->task_state_flags |= SAS_TASK_STATE_DONE;580		spin_unlock_irqrestore(&task->task_state_lock, flags);581 582		ret = TMF_RESP_FUNC_COMPLETE;583	} else {584		/* Fill in the tmf structure */585		isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort,586					       old_request);587 588		spin_unlock_irqrestore(&ihost->scic_lock, flags);589 590		/* Send the task management request. */591		#define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* 1/2 second timeout */592		ret = isci_task_execute_tmf(ihost, idev, &tmf,593					    ISCI_ABORT_TASK_TIMEOUT_MS);594	}595out:596	dev_warn(&ihost->pdev->dev,597		 "%s: Done; dev = %p, task = %p , old_request == %p\n",598		 __func__, idev, task, old_request);599	isci_put_device(idev);600	return ret;601}602 603/**604 * isci_task_abort_task_set() - This function is one of the SAS Domain Template605 *    functions. This is one of the Task Management functoins called by libsas,606 *    to abort all task for the given lun.607 * @d_device: This parameter specifies the domain device associated with this608 *    request.609 * @lun: This parameter specifies the lun associated with this request.610 *611 * status, zero indicates success.612 */613int isci_task_abort_task_set(614	struct domain_device *d_device,615	u8 *lun)616{617	return TMF_RESP_FUNC_FAILED;618}619 620 621/**622 * isci_task_clear_task_set() - This function is one of the SAS Domain Template623 *    functions. This is one of the Task Management functoins called by libsas.624 * @d_device: This parameter specifies the domain device associated with this625 *    request.626 * @lun: This parameter specifies the lun	 associated with this request.627 *628 * status, zero indicates success.629 */630int isci_task_clear_task_set(631	struct domain_device *d_device,632	u8 *lun)633{634	return TMF_RESP_FUNC_FAILED;635}636 637 638/**639 * isci_task_query_task() - This function is implemented to cause libsas to640 *    correctly escalate the failed abort to a LUN or target reset (this is641 *    because sas_scsi_find_task libsas function does not correctly interpret642 *    all return codes from the abort task call).  When TMF_RESP_FUNC_SUCC is643 *    returned, libsas turns this into a LUN reset; when FUNC_FAILED is644 *    returned, libsas will turn this into a target reset645 * @task: This parameter specifies the sas task being queried.646 *647 * status, zero indicates success.648 */649int isci_task_query_task(650	struct sas_task *task)651{652	/* See if there is a pending device reset for this device. */653	if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET)654		return TMF_RESP_FUNC_FAILED;655	else656		return TMF_RESP_FUNC_SUCC;657}658 659/*660 * isci_task_request_complete() - This function is called by the sci core when661 *    an task request completes.662 * @ihost: This parameter specifies the ISCI host object663 * @ireq: This parameter is the completed isci_request object.664 * @completion_status: This parameter specifies the completion status from the665 *    sci core.666 *667 * none.668 */669void670isci_task_request_complete(struct isci_host *ihost,671			   struct isci_request *ireq,672			   enum sci_task_status completion_status)673{674	struct isci_tmf *tmf = isci_request_access_tmf(ireq);675	struct completion *tmf_complete = NULL;676 677	dev_dbg(&ihost->pdev->dev,678		"%s: request = %p, status=%d\n",679		__func__, ireq, completion_status);680 681	set_bit(IREQ_COMPLETE_IN_TARGET, &ireq->flags);682 683	if (tmf) {684		tmf->status = completion_status;685 686		if (tmf->proto == SAS_PROTOCOL_SSP) {687			memcpy(tmf->resp.rsp_buf,688			       ireq->ssp.rsp_buf,689			       SSP_RESP_IU_MAX_SIZE);690		} else if (tmf->proto == SAS_PROTOCOL_SATA) {691			memcpy(&tmf->resp.d2h_fis,692			       &ireq->stp.rsp,693			       sizeof(struct dev_to_host_fis));694		}695		/* PRINT_TMF( ((struct isci_tmf *)request->task)); */696		tmf_complete = tmf->complete;697	}698	sci_controller_complete_io(ihost, ireq->target_device, ireq);699	/* set the 'terminated' flag handle to make sure it cannot be terminated700	 *  or completed again.701	 */702	set_bit(IREQ_TERMINATED, &ireq->flags);703 704	if (test_and_clear_bit(IREQ_ABORT_PATH_ACTIVE, &ireq->flags))705		wake_up_all(&ihost->eventq);706 707	if (!test_bit(IREQ_NO_AUTO_FREE_TAG, &ireq->flags))708		isci_free_tag(ihost, ireq->io_tag);709 710	/* The task management part completes last. */711	if (tmf_complete)712		complete(tmf_complete);713}714 715static int isci_reset_device(struct isci_host *ihost,716			     struct domain_device *dev,717			     struct isci_remote_device *idev)718{719	int rc = TMF_RESP_FUNC_COMPLETE, reset_stat = -1;720	struct sas_phy *phy = sas_get_local_phy(dev);721	struct isci_port *iport = dev->port->lldd_port;722 723	dev_dbg(&ihost->pdev->dev, "%s: idev %p\n", __func__, idev);724 725	/* Suspend the RNC, terminate all outstanding TCs. */726	if (isci_remote_device_suspend_terminate(ihost, idev, NULL)727	    != SCI_SUCCESS) {728		rc = TMF_RESP_FUNC_FAILED;729		goto out;730	}731	/* Note that since the termination for outstanding requests succeeded,732	 * this function will return success.  This is because the resets will733	 * only fail if the device has been removed (ie. hotplug), and the734	 * primary duty of this function is to cleanup tasks, so that is the735	 * relevant status.736	 */737	if (!test_bit(IDEV_GONE, &idev->flags)) {738		if (scsi_is_sas_phy_local(phy)) {739			struct isci_phy *iphy = &ihost->phys[phy->number];740 741			reset_stat = isci_port_perform_hard_reset(ihost, iport,742								  iphy);743		} else744			reset_stat = sas_phy_reset(phy, !dev_is_sata(dev));745	}746	/* Explicitly resume the RNC here, since there was no task sent. */747	isci_remote_device_resume_from_abort(ihost, idev);748 749	dev_dbg(&ihost->pdev->dev, "%s: idev %p complete, reset_stat=%d.\n",750		__func__, idev, reset_stat);751 out:752	sas_put_local_phy(phy);753	return rc;754}755 756int isci_task_I_T_nexus_reset(struct domain_device *dev)757{758	struct isci_host *ihost = dev_to_ihost(dev);759	struct isci_remote_device *idev;760	unsigned long flags;761	int ret;762 763	spin_lock_irqsave(&ihost->scic_lock, flags);764	idev = isci_get_device(dev->lldd_dev);765	spin_unlock_irqrestore(&ihost->scic_lock, flags);766 767	if (!idev) {768		/* XXX: need to cleanup any ireqs targeting this769		 * domain_device770		 */771		ret = -ENODEV;772		goto out;773	}774 775	ret = isci_reset_device(ihost, dev, idev);776 out:777	isci_put_device(idev);778	return ret;779}780