7414 lines · c
1/*******************************************************************2 * This file is part of the Emulex Linux Device Driver for *3 * Fibre Channel Host Bus Adapters. *4 * Copyright (C) 2017-2024 Broadcom. All Rights Reserved. The term *5 * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. *6 * Copyright (C) 2004-2016 Emulex. All rights reserved. *7 * EMULEX and SLI are trademarks of Emulex. *8 * www.broadcom.com *9 * Portions Copyright (C) 2004-2005 Christoph Hellwig *10 * *11 * This program is free software; you can redistribute it and/or *12 * modify it under the terms of version 2 of the GNU General *13 * Public License as published by the Free Software Foundation. *14 * This program is distributed in the hope that it will be useful. *15 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *16 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *17 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *18 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *19 * TO BE LEGALLY INVALID. See the GNU General Public License for *20 * more details, a copy of which can be found in the file COPYING *21 * included with this package. *22 *******************************************************************/23 24#include <linux/ctype.h>25#include <linux/delay.h>26#include <linux/pci.h>27#include <linux/interrupt.h>28#include <linux/module.h>29#include <linux/aer.h>30#include <linux/gfp.h>31#include <linux/kernel.h>32 33#include <scsi/scsi.h>34#include <scsi/scsi_device.h>35#include <scsi/scsi_host.h>36#include <scsi/scsi_tcq.h>37#include <scsi/scsi_transport_fc.h>38#include <scsi/fc/fc_fs.h>39 40#include "lpfc_hw4.h"41#include "lpfc_hw.h"42#include "lpfc_sli.h"43#include "lpfc_sli4.h"44#include "lpfc_nl.h"45#include "lpfc_disc.h"46#include "lpfc.h"47#include "lpfc_scsi.h"48#include "lpfc_nvme.h"49#include "lpfc_logmsg.h"50#include "lpfc_version.h"51#include "lpfc_compat.h"52#include "lpfc_crtn.h"53#include "lpfc_vport.h"54#include "lpfc_attr.h"55 56#define LPFC_DEF_DEVLOSS_TMO 3057#define LPFC_MIN_DEVLOSS_TMO 158#define LPFC_MAX_DEVLOSS_TMO 25559 60#define LPFC_MAX_INFO_TMP_LEN 10061#define LPFC_INFO_MORE_STR "\nCould be more info...\n"62/*63 * Write key size should be multiple of 4. If write key is changed64 * make sure that library write key is also changed.65 */66#define LPFC_REG_WRITE_KEY_SIZE 467#define LPFC_REG_WRITE_KEY "EMLX"68 69const char *const trunk_errmsg[] = { /* map errcode */70 "", /* There is no such error code at index 0*/71 "link negotiated speed does not match existing"72 " trunk - link was \"low\" speed",73 "link negotiated speed does not match"74 " existing trunk - link was \"middle\" speed",75 "link negotiated speed does not match existing"76 " trunk - link was \"high\" speed",77 "Attached to non-trunking port - F_Port",78 "Attached to non-trunking port - N_Port",79 "FLOGI response timeout",80 "non-FLOGI frame received",81 "Invalid FLOGI response",82 "Trunking initialization protocol",83 "Trunk peer device mismatch",84};85 86/**87 * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules88 * @incr: integer to convert.89 * @hdw: ascii string holding converted integer plus a string terminator.90 *91 * Description:92 * JEDEC Joint Electron Device Engineering Council.93 * Convert a 32 bit integer composed of 8 nibbles into an 8 byte ascii94 * character string. The string is then terminated with a NULL in byte 9.95 * Hex 0-9 becomes ascii '0' to '9'.96 * Hex a-f becomes ascii '=' to 'B' capital B.97 *98 * Notes:99 * Coded for 32 bit integers only.100 **/101static void102lpfc_jedec_to_ascii(int incr, char hdw[])103{104 int i, j;105 for (i = 0; i < 8; i++) {106 j = (incr & 0xf);107 if (j <= 9)108 hdw[7 - i] = 0x30 + j;109 else110 hdw[7 - i] = 0x61 + j - 10;111 incr = (incr >> 4);112 }113 hdw[8] = 0;114 return;115}116 117static ssize_t118lpfc_cmf_info_show(struct device *dev, struct device_attribute *attr,119 char *buf)120{121 struct Scsi_Host *shost = class_to_shost(dev);122 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;123 struct lpfc_hba *phba = vport->phba;124 struct lpfc_cgn_info *cp = NULL;125 struct lpfc_cgn_stat *cgs;126 int len = 0;127 int cpu;128 u64 rcv, total;129 char tmp[LPFC_MAX_INFO_TMP_LEN] = {0};130 131 if (phba->cgn_i)132 cp = (struct lpfc_cgn_info *)phba->cgn_i->virt;133 134 scnprintf(tmp, sizeof(tmp),135 "Congestion Mgmt Info: E2Eattr %d Ver %d "136 "CMF %d cnt %d\n",137 phba->sli4_hba.pc_sli4_params.mi_cap,138 cp ? cp->cgn_info_version : 0,139 phba->sli4_hba.pc_sli4_params.cmf, phba->cmf_timer_cnt);140 141 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)142 goto buffer_done;143 144 if (!phba->sli4_hba.pc_sli4_params.cmf)145 goto buffer_done;146 147 switch (phba->cgn_init_reg_signal) {148 case EDC_CG_SIG_WARN_ONLY:149 scnprintf(tmp, sizeof(tmp),150 "Register: Init: Signal:WARN ");151 break;152 case EDC_CG_SIG_WARN_ALARM:153 scnprintf(tmp, sizeof(tmp),154 "Register: Init: Signal:WARN|ALARM ");155 break;156 default:157 scnprintf(tmp, sizeof(tmp),158 "Register: Init: Signal:NONE ");159 break;160 }161 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)162 goto buffer_done;163 164 switch (phba->cgn_init_reg_fpin) {165 case LPFC_CGN_FPIN_WARN:166 scnprintf(tmp, sizeof(tmp),167 "FPIN:WARN\n");168 break;169 case LPFC_CGN_FPIN_ALARM:170 scnprintf(tmp, sizeof(tmp),171 "FPIN:ALARM\n");172 break;173 case LPFC_CGN_FPIN_BOTH:174 scnprintf(tmp, sizeof(tmp),175 "FPIN:WARN|ALARM\n");176 break;177 default:178 scnprintf(tmp, sizeof(tmp),179 "FPIN:NONE\n");180 break;181 }182 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)183 goto buffer_done;184 185 switch (phba->cgn_reg_signal) {186 case EDC_CG_SIG_WARN_ONLY:187 scnprintf(tmp, sizeof(tmp),188 " Current: Signal:WARN ");189 break;190 case EDC_CG_SIG_WARN_ALARM:191 scnprintf(tmp, sizeof(tmp),192 " Current: Signal:WARN|ALARM ");193 break;194 default:195 scnprintf(tmp, sizeof(tmp),196 " Current: Signal:NONE ");197 break;198 }199 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)200 goto buffer_done;201 202 switch (phba->cgn_reg_fpin) {203 case LPFC_CGN_FPIN_WARN:204 scnprintf(tmp, sizeof(tmp),205 "FPIN:WARN ACQEcnt:%d\n", phba->cgn_acqe_cnt);206 break;207 case LPFC_CGN_FPIN_ALARM:208 scnprintf(tmp, sizeof(tmp),209 "FPIN:ALARM ACQEcnt:%d\n", phba->cgn_acqe_cnt);210 break;211 case LPFC_CGN_FPIN_BOTH:212 scnprintf(tmp, sizeof(tmp),213 "FPIN:WARN|ALARM ACQEcnt:%d\n", phba->cgn_acqe_cnt);214 break;215 default:216 scnprintf(tmp, sizeof(tmp),217 "FPIN:NONE ACQEcnt:%d\n", phba->cgn_acqe_cnt);218 break;219 }220 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)221 goto buffer_done;222 223 if (phba->cmf_active_mode != phba->cgn_p.cgn_param_mode) {224 switch (phba->cmf_active_mode) {225 case LPFC_CFG_OFF:226 scnprintf(tmp, sizeof(tmp), "Active: Mode:Off\n");227 break;228 case LPFC_CFG_MANAGED:229 scnprintf(tmp, sizeof(tmp), "Active: Mode:Managed\n");230 break;231 case LPFC_CFG_MONITOR:232 scnprintf(tmp, sizeof(tmp), "Active: Mode:Monitor\n");233 break;234 default:235 scnprintf(tmp, sizeof(tmp), "Active: Mode:Unknown\n");236 }237 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)238 goto buffer_done;239 }240 241 switch (phba->cgn_p.cgn_param_mode) {242 case LPFC_CFG_OFF:243 scnprintf(tmp, sizeof(tmp), "Config: Mode:Off ");244 break;245 case LPFC_CFG_MANAGED:246 scnprintf(tmp, sizeof(tmp), "Config: Mode:Managed ");247 break;248 case LPFC_CFG_MONITOR:249 scnprintf(tmp, sizeof(tmp), "Config: Mode:Monitor ");250 break;251 default:252 scnprintf(tmp, sizeof(tmp), "Config: Mode:Unknown ");253 }254 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)255 goto buffer_done;256 257 total = 0;258 rcv = 0;259 for_each_present_cpu(cpu) {260 cgs = per_cpu_ptr(phba->cmf_stat, cpu);261 total += atomic64_read(&cgs->total_bytes);262 rcv += atomic64_read(&cgs->rcv_bytes);263 }264 265 scnprintf(tmp, sizeof(tmp),266 "IObusy:%d Info:%d Bytes: Rcv:x%llx Total:x%llx\n",267 atomic_read(&phba->cmf_busy),268 phba->cmf_active_info, rcv, total);269 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)270 goto buffer_done;271 272 scnprintf(tmp, sizeof(tmp),273 "Port_speed:%d Link_byte_cnt:%ld "274 "Max_byte_per_interval:%ld\n",275 lpfc_sli_port_speed_get(phba),276 (unsigned long)phba->cmf_link_byte_count,277 (unsigned long)phba->cmf_max_bytes_per_interval);278 strlcat(buf, tmp, PAGE_SIZE);279 280buffer_done:281 len = strnlen(buf, PAGE_SIZE);282 283 if (unlikely(len >= (PAGE_SIZE - 1))) {284 lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,285 "6312 Catching potential buffer "286 "overflow > PAGE_SIZE = %lu bytes\n",287 PAGE_SIZE);288 strscpy(buf + PAGE_SIZE - 1 - sizeof(LPFC_INFO_MORE_STR),289 LPFC_INFO_MORE_STR, sizeof(LPFC_INFO_MORE_STR) + 1);290 }291 return len;292}293 294/**295 * lpfc_drvr_version_show - Return the Emulex driver string with version number296 * @dev: class unused variable.297 * @attr: device attribute, not used.298 * @buf: on return contains the module description text.299 *300 * Returns: size of formatted string.301 **/302static ssize_t303lpfc_drvr_version_show(struct device *dev, struct device_attribute *attr,304 char *buf)305{306 return scnprintf(buf, PAGE_SIZE, LPFC_MODULE_DESC "\n");307}308 309/**310 * lpfc_enable_fip_show - Return the fip mode of the HBA311 * @dev: class unused variable.312 * @attr: device attribute, not used.313 * @buf: on return contains the module description text.314 *315 * Returns: size of formatted string.316 **/317static ssize_t318lpfc_enable_fip_show(struct device *dev, struct device_attribute *attr,319 char *buf)320{321 struct Scsi_Host *shost = class_to_shost(dev);322 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;323 struct lpfc_hba *phba = vport->phba;324 325 if (test_bit(HBA_FIP_SUPPORT, &phba->hba_flag))326 return scnprintf(buf, PAGE_SIZE, "1\n");327 else328 return scnprintf(buf, PAGE_SIZE, "0\n");329}330 331static ssize_t332lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr,333 char *buf)334{335 struct Scsi_Host *shost = class_to_shost(dev);336 struct lpfc_vport *vport = shost_priv(shost);337 struct lpfc_hba *phba = vport->phba;338 struct lpfc_nvmet_tgtport *tgtp;339 struct nvme_fc_local_port *localport;340 struct lpfc_nvme_lport *lport;341 struct lpfc_nvme_rport *rport;342 struct lpfc_nodelist *ndlp;343 struct nvme_fc_remote_port *nrport;344 struct lpfc_fc4_ctrl_stat *cstat;345 uint64_t data1, data2, data3;346 uint64_t totin, totout, tot;347 unsigned long iflags;348 char *statep;349 int i;350 int len = 0;351 char tmp[LPFC_MAX_INFO_TMP_LEN] = {0};352 353 if (!(vport->cfg_enable_fc4_type & LPFC_ENABLE_NVME)) {354 len = scnprintf(buf, PAGE_SIZE, "NVME Disabled\n");355 return len;356 }357 if (phba->nvmet_support) {358 if (!phba->targetport) {359 len = scnprintf(buf, PAGE_SIZE,360 "NVME Target: x%llx is not allocated\n",361 wwn_to_u64(vport->fc_portname.u.wwn));362 return len;363 }364 /* Port state is only one of two values for now. */365 if (phba->targetport->port_id)366 statep = "REGISTERED";367 else368 statep = "INIT";369 scnprintf(tmp, sizeof(tmp),370 "NVME Target Enabled State %s\n",371 statep);372 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)373 goto buffer_done;374 375 scnprintf(tmp, sizeof(tmp),376 "%s%d WWPN x%llx WWNN x%llx DID x%06x\n",377 "NVME Target: lpfc",378 phba->brd_no,379 wwn_to_u64(vport->fc_portname.u.wwn),380 wwn_to_u64(vport->fc_nodename.u.wwn),381 phba->targetport->port_id);382 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)383 goto buffer_done;384 385 if (strlcat(buf, "\nNVME Target: Statistics\n", PAGE_SIZE)386 >= PAGE_SIZE)387 goto buffer_done;388 389 tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;390 scnprintf(tmp, sizeof(tmp),391 "LS: Rcv %08x Drop %08x Abort %08x\n",392 atomic_read(&tgtp->rcv_ls_req_in),393 atomic_read(&tgtp->rcv_ls_req_drop),394 atomic_read(&tgtp->xmt_ls_abort));395 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)396 goto buffer_done;397 398 if (atomic_read(&tgtp->rcv_ls_req_in) !=399 atomic_read(&tgtp->rcv_ls_req_out)) {400 scnprintf(tmp, sizeof(tmp),401 "Rcv LS: in %08x != out %08x\n",402 atomic_read(&tgtp->rcv_ls_req_in),403 atomic_read(&tgtp->rcv_ls_req_out));404 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)405 goto buffer_done;406 }407 408 scnprintf(tmp, sizeof(tmp),409 "LS: Xmt %08x Drop %08x Cmpl %08x\n",410 atomic_read(&tgtp->xmt_ls_rsp),411 atomic_read(&tgtp->xmt_ls_drop),412 atomic_read(&tgtp->xmt_ls_rsp_cmpl));413 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)414 goto buffer_done;415 416 scnprintf(tmp, sizeof(tmp),417 "LS: RSP Abort %08x xb %08x Err %08x\n",418 atomic_read(&tgtp->xmt_ls_rsp_aborted),419 atomic_read(&tgtp->xmt_ls_rsp_xb_set),420 atomic_read(&tgtp->xmt_ls_rsp_error));421 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)422 goto buffer_done;423 424 scnprintf(tmp, sizeof(tmp),425 "FCP: Rcv %08x Defer %08x Release %08x "426 "Drop %08x\n",427 atomic_read(&tgtp->rcv_fcp_cmd_in),428 atomic_read(&tgtp->rcv_fcp_cmd_defer),429 atomic_read(&tgtp->xmt_fcp_release),430 atomic_read(&tgtp->rcv_fcp_cmd_drop));431 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)432 goto buffer_done;433 434 if (atomic_read(&tgtp->rcv_fcp_cmd_in) !=435 atomic_read(&tgtp->rcv_fcp_cmd_out)) {436 scnprintf(tmp, sizeof(tmp),437 "Rcv FCP: in %08x != out %08x\n",438 atomic_read(&tgtp->rcv_fcp_cmd_in),439 atomic_read(&tgtp->rcv_fcp_cmd_out));440 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)441 goto buffer_done;442 }443 444 scnprintf(tmp, sizeof(tmp),445 "FCP Rsp: RD %08x rsp %08x WR %08x rsp %08x "446 "drop %08x\n",447 atomic_read(&tgtp->xmt_fcp_read),448 atomic_read(&tgtp->xmt_fcp_read_rsp),449 atomic_read(&tgtp->xmt_fcp_write),450 atomic_read(&tgtp->xmt_fcp_rsp),451 atomic_read(&tgtp->xmt_fcp_drop));452 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)453 goto buffer_done;454 455 scnprintf(tmp, sizeof(tmp),456 "FCP Rsp Cmpl: %08x err %08x drop %08x\n",457 atomic_read(&tgtp->xmt_fcp_rsp_cmpl),458 atomic_read(&tgtp->xmt_fcp_rsp_error),459 atomic_read(&tgtp->xmt_fcp_rsp_drop));460 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)461 goto buffer_done;462 463 scnprintf(tmp, sizeof(tmp),464 "FCP Rsp Abort: %08x xb %08x xricqe %08x\n",465 atomic_read(&tgtp->xmt_fcp_rsp_aborted),466 atomic_read(&tgtp->xmt_fcp_rsp_xb_set),467 atomic_read(&tgtp->xmt_fcp_xri_abort_cqe));468 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)469 goto buffer_done;470 471 scnprintf(tmp, sizeof(tmp),472 "ABORT: Xmt %08x Cmpl %08x\n",473 atomic_read(&tgtp->xmt_fcp_abort),474 atomic_read(&tgtp->xmt_fcp_abort_cmpl));475 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)476 goto buffer_done;477 478 scnprintf(tmp, sizeof(tmp),479 "ABORT: Sol %08x Usol %08x Err %08x Cmpl %08x\n",480 atomic_read(&tgtp->xmt_abort_sol),481 atomic_read(&tgtp->xmt_abort_unsol),482 atomic_read(&tgtp->xmt_abort_rsp),483 atomic_read(&tgtp->xmt_abort_rsp_error));484 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)485 goto buffer_done;486 487 scnprintf(tmp, sizeof(tmp),488 "DELAY: ctx %08x fod %08x wqfull %08x\n",489 atomic_read(&tgtp->defer_ctx),490 atomic_read(&tgtp->defer_fod),491 atomic_read(&tgtp->defer_wqfull));492 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)493 goto buffer_done;494 495 /* Calculate outstanding IOs */496 tot = atomic_read(&tgtp->rcv_fcp_cmd_drop);497 tot += atomic_read(&tgtp->xmt_fcp_release);498 tot = atomic_read(&tgtp->rcv_fcp_cmd_in) - tot;499 500 scnprintf(tmp, sizeof(tmp),501 "IO_CTX: %08x WAIT: cur %08x tot %08x\n"502 "CTX Outstanding %08llx\n\n",503 phba->sli4_hba.nvmet_xri_cnt,504 phba->sli4_hba.nvmet_io_wait_cnt,505 phba->sli4_hba.nvmet_io_wait_total,506 tot);507 strlcat(buf, tmp, PAGE_SIZE);508 goto buffer_done;509 }510 511 localport = vport->localport;512 if (!localport) {513 len = scnprintf(buf, PAGE_SIZE,514 "NVME Initiator x%llx is not allocated\n",515 wwn_to_u64(vport->fc_portname.u.wwn));516 return len;517 }518 lport = (struct lpfc_nvme_lport *)localport->private;519 if (strlcat(buf, "\nNVME Initiator Enabled\n", PAGE_SIZE) >= PAGE_SIZE)520 goto buffer_done;521 522 scnprintf(tmp, sizeof(tmp),523 "XRI Dist lpfc%d Total %d IO %d ELS %d\n",524 phba->brd_no,525 phba->sli4_hba.max_cfg_param.max_xri,526 phba->sli4_hba.io_xri_max,527 lpfc_sli4_get_els_iocb_cnt(phba));528 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)529 goto buffer_done;530 531 /* Port state is only one of two values for now. */532 if (localport->port_id)533 statep = "ONLINE";534 else535 statep = "UNKNOWN ";536 537 scnprintf(tmp, sizeof(tmp),538 "%s%d WWPN x%llx WWNN x%llx DID x%06x %s\n",539 "NVME LPORT lpfc",540 phba->brd_no,541 wwn_to_u64(vport->fc_portname.u.wwn),542 wwn_to_u64(vport->fc_nodename.u.wwn),543 localport->port_id, statep);544 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)545 goto buffer_done;546 547 spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags);548 549 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {550 nrport = NULL;551 spin_lock(&ndlp->lock);552 rport = lpfc_ndlp_get_nrport(ndlp);553 if (rport)554 nrport = rport->remoteport;555 spin_unlock(&ndlp->lock);556 if (!nrport)557 continue;558 559 /* Port state is only one of two values for now. */560 switch (nrport->port_state) {561 case FC_OBJSTATE_ONLINE:562 statep = "ONLINE";563 break;564 case FC_OBJSTATE_UNKNOWN:565 statep = "UNKNOWN ";566 break;567 default:568 statep = "UNSUPPORTED";569 break;570 }571 572 /* Tab in to show lport ownership. */573 if (strlcat(buf, "NVME RPORT ", PAGE_SIZE) >= PAGE_SIZE)574 goto unlock_buf_done;575 if (phba->brd_no >= 10) {576 if (strlcat(buf, " ", PAGE_SIZE) >= PAGE_SIZE)577 goto unlock_buf_done;578 }579 580 scnprintf(tmp, sizeof(tmp), "WWPN x%llx ",581 nrport->port_name);582 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)583 goto unlock_buf_done;584 585 scnprintf(tmp, sizeof(tmp), "WWNN x%llx ",586 nrport->node_name);587 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)588 goto unlock_buf_done;589 590 scnprintf(tmp, sizeof(tmp), "DID x%06x ",591 nrport->port_id);592 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)593 goto unlock_buf_done;594 595 /* An NVME rport can have multiple roles. */596 if (nrport->port_role & FC_PORT_ROLE_NVME_INITIATOR) {597 if (strlcat(buf, "INITIATOR ", PAGE_SIZE) >= PAGE_SIZE)598 goto unlock_buf_done;599 }600 if (nrport->port_role & FC_PORT_ROLE_NVME_TARGET) {601 if (strlcat(buf, "TARGET ", PAGE_SIZE) >= PAGE_SIZE)602 goto unlock_buf_done;603 }604 if (nrport->port_role & FC_PORT_ROLE_NVME_DISCOVERY) {605 if (strlcat(buf, "DISCSRVC ", PAGE_SIZE) >= PAGE_SIZE)606 goto unlock_buf_done;607 }608 if (nrport->port_role & ~(FC_PORT_ROLE_NVME_INITIATOR |609 FC_PORT_ROLE_NVME_TARGET |610 FC_PORT_ROLE_NVME_DISCOVERY)) {611 scnprintf(tmp, sizeof(tmp), "UNKNOWN ROLE x%x",612 nrport->port_role);613 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)614 goto unlock_buf_done;615 }616 617 scnprintf(tmp, sizeof(tmp), "%s\n", statep);618 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)619 goto unlock_buf_done;620 }621 spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags);622 623 if (!lport)624 goto buffer_done;625 626 if (strlcat(buf, "\nNVME Statistics\n", PAGE_SIZE) >= PAGE_SIZE)627 goto buffer_done;628 629 scnprintf(tmp, sizeof(tmp),630 "LS: Xmt %010x Cmpl %010x Abort %08x\n",631 atomic_read(&lport->fc4NvmeLsRequests),632 atomic_read(&lport->fc4NvmeLsCmpls),633 atomic_read(&lport->xmt_ls_abort));634 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)635 goto buffer_done;636 637 scnprintf(tmp, sizeof(tmp),638 "LS XMIT: Err %08x CMPL: xb %08x Err %08x\n",639 atomic_read(&lport->xmt_ls_err),640 atomic_read(&lport->cmpl_ls_xb),641 atomic_read(&lport->cmpl_ls_err));642 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)643 goto buffer_done;644 645 totin = 0;646 totout = 0;647 for (i = 0; i < phba->cfg_hdw_queue; i++) {648 cstat = &phba->sli4_hba.hdwq[i].nvme_cstat;649 tot = cstat->io_cmpls;650 totin += tot;651 data1 = cstat->input_requests;652 data2 = cstat->output_requests;653 data3 = cstat->control_requests;654 totout += (data1 + data2 + data3);655 }656 scnprintf(tmp, sizeof(tmp),657 "Total FCP Cmpl %016llx Issue %016llx "658 "OutIO %016llx\n",659 totin, totout, totout - totin);660 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)661 goto buffer_done;662 663 scnprintf(tmp, sizeof(tmp),664 "\tabort %08x noxri %08x nondlp %08x qdepth %08x "665 "wqerr %08x err %08x\n",666 atomic_read(&lport->xmt_fcp_abort),667 atomic_read(&lport->xmt_fcp_noxri),668 atomic_read(&lport->xmt_fcp_bad_ndlp),669 atomic_read(&lport->xmt_fcp_qdepth),670 atomic_read(&lport->xmt_fcp_wqerr),671 atomic_read(&lport->xmt_fcp_err));672 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)673 goto buffer_done;674 675 scnprintf(tmp, sizeof(tmp),676 "FCP CMPL: xb %08x Err %08x\n",677 atomic_read(&lport->cmpl_fcp_xb),678 atomic_read(&lport->cmpl_fcp_err));679 strlcat(buf, tmp, PAGE_SIZE);680 681 /* host_lock is already unlocked. */682 goto buffer_done;683 684 unlock_buf_done:685 spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags);686 687 buffer_done:688 len = strnlen(buf, PAGE_SIZE);689 690 if (unlikely(len >= (PAGE_SIZE - 1))) {691 lpfc_printf_log(phba, KERN_INFO, LOG_NVME,692 "6314 Catching potential buffer "693 "overflow > PAGE_SIZE = %lu bytes\n",694 PAGE_SIZE);695 strscpy(buf + PAGE_SIZE - 1 - sizeof(LPFC_INFO_MORE_STR),696 LPFC_INFO_MORE_STR,697 sizeof(LPFC_INFO_MORE_STR) + 1);698 }699 700 return len;701}702 703static ssize_t704lpfc_scsi_stat_show(struct device *dev, struct device_attribute *attr,705 char *buf)706{707 struct Scsi_Host *shost = class_to_shost(dev);708 struct lpfc_vport *vport = shost_priv(shost);709 struct lpfc_hba *phba = vport->phba;710 int len;711 struct lpfc_fc4_ctrl_stat *cstat;712 u64 data1, data2, data3;713 u64 tot, totin, totout;714 int i;715 char tmp[LPFC_MAX_SCSI_INFO_TMP_LEN] = {0};716 717 if (!(vport->cfg_enable_fc4_type & LPFC_ENABLE_FCP) ||718 (phba->sli_rev != LPFC_SLI_REV4))719 return 0;720 721 scnprintf(buf, PAGE_SIZE, "SCSI HDWQ Statistics\n");722 723 totin = 0;724 totout = 0;725 for (i = 0; i < phba->cfg_hdw_queue; i++) {726 cstat = &phba->sli4_hba.hdwq[i].scsi_cstat;727 tot = cstat->io_cmpls;728 totin += tot;729 data1 = cstat->input_requests;730 data2 = cstat->output_requests;731 data3 = cstat->control_requests;732 totout += (data1 + data2 + data3);733 734 scnprintf(tmp, sizeof(tmp), "HDWQ (%d): Rd %016llx Wr %016llx "735 "IO %016llx ", i, data1, data2, data3);736 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)737 goto buffer_done;738 739 scnprintf(tmp, sizeof(tmp), "Cmpl %016llx OutIO %016llx\n",740 tot, ((data1 + data2 + data3) - tot));741 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE)742 goto buffer_done;743 }744 scnprintf(tmp, sizeof(tmp), "Total FCP Cmpl %016llx Issue %016llx "745 "OutIO %016llx\n", totin, totout, totout - totin);746 strlcat(buf, tmp, PAGE_SIZE);747 748buffer_done:749 len = strnlen(buf, PAGE_SIZE);750 751 return len;752}753 754static ssize_t755lpfc_bg_info_show(struct device *dev, struct device_attribute *attr,756 char *buf)757{758 struct Scsi_Host *shost = class_to_shost(dev);759 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;760 struct lpfc_hba *phba = vport->phba;761 762 if (phba->cfg_enable_bg) {763 if (phba->sli3_options & LPFC_SLI3_BG_ENABLED)764 return scnprintf(buf, PAGE_SIZE,765 "BlockGuard Enabled\n");766 else767 return scnprintf(buf, PAGE_SIZE,768 "BlockGuard Not Supported\n");769 } else770 return scnprintf(buf, PAGE_SIZE,771 "BlockGuard Disabled\n");772}773 774static ssize_t775lpfc_bg_guard_err_show(struct device *dev, struct device_attribute *attr,776 char *buf)777{778 struct Scsi_Host *shost = class_to_shost(dev);779 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;780 struct lpfc_hba *phba = vport->phba;781 782 return scnprintf(buf, PAGE_SIZE, "%llu\n",783 (unsigned long long)phba->bg_guard_err_cnt);784}785 786static ssize_t787lpfc_bg_apptag_err_show(struct device *dev, struct device_attribute *attr,788 char *buf)789{790 struct Scsi_Host *shost = class_to_shost(dev);791 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;792 struct lpfc_hba *phba = vport->phba;793 794 return scnprintf(buf, PAGE_SIZE, "%llu\n",795 (unsigned long long)phba->bg_apptag_err_cnt);796}797 798static ssize_t799lpfc_bg_reftag_err_show(struct device *dev, struct device_attribute *attr,800 char *buf)801{802 struct Scsi_Host *shost = class_to_shost(dev);803 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;804 struct lpfc_hba *phba = vport->phba;805 806 return scnprintf(buf, PAGE_SIZE, "%llu\n",807 (unsigned long long)phba->bg_reftag_err_cnt);808}809 810/**811 * lpfc_info_show - Return some pci info about the host in ascii812 * @dev: class converted to a Scsi_host structure.813 * @attr: device attribute, not used.814 * @buf: on return contains the formatted text from lpfc_info().815 *816 * Returns: size of formatted string.817 **/818static ssize_t819lpfc_info_show(struct device *dev, struct device_attribute *attr,820 char *buf)821{822 struct Scsi_Host *host = class_to_shost(dev);823 824 return scnprintf(buf, PAGE_SIZE, "%s\n", lpfc_info(host));825}826 827/**828 * lpfc_serialnum_show - Return the hba serial number in ascii829 * @dev: class converted to a Scsi_host structure.830 * @attr: device attribute, not used.831 * @buf: on return contains the formatted text serial number.832 *833 * Returns: size of formatted string.834 **/835static ssize_t836lpfc_serialnum_show(struct device *dev, struct device_attribute *attr,837 char *buf)838{839 struct Scsi_Host *shost = class_to_shost(dev);840 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;841 struct lpfc_hba *phba = vport->phba;842 843 return scnprintf(buf, PAGE_SIZE, "%s\n", phba->SerialNumber);844}845 846/**847 * lpfc_temp_sensor_show - Return the temperature sensor level848 * @dev: class converted to a Scsi_host structure.849 * @attr: device attribute, not used.850 * @buf: on return contains the formatted support level.851 *852 * Description:853 * Returns a number indicating the temperature sensor level currently854 * supported, zero or one in ascii.855 *856 * Returns: size of formatted string.857 **/858static ssize_t859lpfc_temp_sensor_show(struct device *dev, struct device_attribute *attr,860 char *buf)861{862 struct Scsi_Host *shost = class_to_shost(dev);863 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;864 struct lpfc_hba *phba = vport->phba;865 return scnprintf(buf, PAGE_SIZE, "%d\n", phba->temp_sensor_support);866}867 868/**869 * lpfc_modeldesc_show - Return the model description of the hba870 * @dev: class converted to a Scsi_host structure.871 * @attr: device attribute, not used.872 * @buf: on return contains the scsi vpd model description.873 *874 * Returns: size of formatted string.875 **/876static ssize_t877lpfc_modeldesc_show(struct device *dev, struct device_attribute *attr,878 char *buf)879{880 struct Scsi_Host *shost = class_to_shost(dev);881 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;882 struct lpfc_hba *phba = vport->phba;883 884 return scnprintf(buf, PAGE_SIZE, "%s\n", phba->ModelDesc);885}886 887/**888 * lpfc_modelname_show - Return the model name of the hba889 * @dev: class converted to a Scsi_host structure.890 * @attr: device attribute, not used.891 * @buf: on return contains the scsi vpd model name.892 *893 * Returns: size of formatted string.894 **/895static ssize_t896lpfc_modelname_show(struct device *dev, struct device_attribute *attr,897 char *buf)898{899 struct Scsi_Host *shost = class_to_shost(dev);900 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;901 struct lpfc_hba *phba = vport->phba;902 903 return scnprintf(buf, PAGE_SIZE, "%s\n", phba->ModelName);904}905 906/**907 * lpfc_programtype_show - Return the program type of the hba908 * @dev: class converted to a Scsi_host structure.909 * @attr: device attribute, not used.910 * @buf: on return contains the scsi vpd program type.911 *912 * Returns: size of formatted string.913 **/914static ssize_t915lpfc_programtype_show(struct device *dev, struct device_attribute *attr,916 char *buf)917{918 struct Scsi_Host *shost = class_to_shost(dev);919 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;920 struct lpfc_hba *phba = vport->phba;921 922 return scnprintf(buf, PAGE_SIZE, "%s\n", phba->ProgramType);923}924 925/**926 * lpfc_vportnum_show - Return the port number in ascii of the hba927 * @dev: class converted to a Scsi_host structure.928 * @attr: device attribute, not used.929 * @buf: on return contains scsi vpd program type.930 *931 * Returns: size of formatted string.932 **/933static ssize_t934lpfc_vportnum_show(struct device *dev, struct device_attribute *attr,935 char *buf)936{937 struct Scsi_Host *shost = class_to_shost(dev);938 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;939 struct lpfc_hba *phba = vport->phba;940 941 return scnprintf(buf, PAGE_SIZE, "%s\n", phba->Port);942}943 944/**945 * lpfc_fwrev_show - Return the firmware rev running in the hba946 * @dev: class converted to a Scsi_host structure.947 * @attr: device attribute, not used.948 * @buf: on return contains the scsi vpd program type.949 *950 * Returns: size of formatted string.951 **/952static ssize_t953lpfc_fwrev_show(struct device *dev, struct device_attribute *attr,954 char *buf)955{956 struct Scsi_Host *shost = class_to_shost(dev);957 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;958 struct lpfc_hba *phba = vport->phba;959 uint32_t if_type;960 uint8_t sli_family;961 char fwrev[FW_REV_STR_SIZE];962 int len;963 964 lpfc_decode_firmware_rev(phba, fwrev, 1);965 if_type = phba->sli4_hba.pc_sli4_params.if_type;966 sli_family = phba->sli4_hba.pc_sli4_params.sli_family;967 968 if (phba->sli_rev < LPFC_SLI_REV4)969 len = scnprintf(buf, PAGE_SIZE, "%s, sli-%d\n",970 fwrev, phba->sli_rev);971 else972 len = scnprintf(buf, PAGE_SIZE, "%s, sli-%d:%d:%x\n",973 fwrev, phba->sli_rev, if_type, sli_family);974 975 return len;976}977 978/**979 * lpfc_hdw_show - Return the jedec information about the hba980 * @dev: class converted to a Scsi_host structure.981 * @attr: device attribute, not used.982 * @buf: on return contains the scsi vpd program type.983 *984 * Returns: size of formatted string.985 **/986static ssize_t987lpfc_hdw_show(struct device *dev, struct device_attribute *attr, char *buf)988{989 char hdw[9];990 struct Scsi_Host *shost = class_to_shost(dev);991 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;992 struct lpfc_hba *phba = vport->phba;993 lpfc_vpd_t *vp = &phba->vpd;994 995 lpfc_jedec_to_ascii(vp->rev.biuRev, hdw);996 return scnprintf(buf, PAGE_SIZE, "%s %08x %08x\n", hdw,997 vp->rev.smRev, vp->rev.smFwRev);998}999 1000/**1001 * lpfc_option_rom_version_show - Return the adapter ROM FCode version1002 * @dev: class converted to a Scsi_host structure.1003 * @attr: device attribute, not used.1004 * @buf: on return contains the ROM and FCode ascii strings.1005 *1006 * Returns: size of formatted string.1007 **/1008static ssize_t1009lpfc_option_rom_version_show(struct device *dev, struct device_attribute *attr,1010 char *buf)1011{1012 struct Scsi_Host *shost = class_to_shost(dev);1013 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;1014 struct lpfc_hba *phba = vport->phba;1015 char fwrev[FW_REV_STR_SIZE];1016 1017 if (phba->sli_rev < LPFC_SLI_REV4)1018 return scnprintf(buf, PAGE_SIZE, "%s\n",1019 phba->OptionROMVersion);1020 1021 lpfc_decode_firmware_rev(phba, fwrev, 1);1022 return scnprintf(buf, PAGE_SIZE, "%s\n", fwrev);1023}1024 1025/**1026 * lpfc_link_state_show - Return the link state of the port1027 * @dev: class converted to a Scsi_host structure.1028 * @attr: device attribute, not used.1029 * @buf: on return contains text describing the state of the link.1030 *1031 * Notes:1032 * The switch statement has no default so zero will be returned.1033 *1034 * Returns: size of formatted string.1035 **/1036static ssize_t1037lpfc_link_state_show(struct device *dev, struct device_attribute *attr,1038 char *buf)1039{1040 struct Scsi_Host *shost = class_to_shost(dev);1041 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;1042 struct lpfc_hba *phba = vport->phba;1043 int len = 0;1044 1045 switch (phba->link_state) {1046 case LPFC_LINK_UNKNOWN:1047 case LPFC_WARM_START:1048 case LPFC_INIT_START:1049 case LPFC_INIT_MBX_CMDS:1050 case LPFC_LINK_DOWN:1051 case LPFC_HBA_ERROR:1052 if (test_bit(LINK_DISABLED, &phba->hba_flag))1053 len += scnprintf(buf + len, PAGE_SIZE-len,1054 "Link Down - User disabled\n");1055 else1056 len += scnprintf(buf + len, PAGE_SIZE-len,1057 "Link Down\n");1058 break;1059 case LPFC_LINK_UP:1060 case LPFC_CLEAR_LA:1061 case LPFC_HBA_READY:1062 len += scnprintf(buf + len, PAGE_SIZE-len, "Link Up - ");1063 1064 switch (vport->port_state) {1065 case LPFC_LOCAL_CFG_LINK:1066 len += scnprintf(buf + len, PAGE_SIZE-len,1067 "Configuring Link\n");1068 break;1069 case LPFC_FDISC:1070 case LPFC_FLOGI:1071 case LPFC_FABRIC_CFG_LINK:1072 case LPFC_NS_REG:1073 case LPFC_NS_QRY:1074 case LPFC_BUILD_DISC_LIST:1075 case LPFC_DISC_AUTH:1076 len += scnprintf(buf + len, PAGE_SIZE - len,1077 "Discovery\n");1078 break;1079 case LPFC_VPORT_READY:1080 len += scnprintf(buf + len, PAGE_SIZE - len,1081 "Ready\n");1082 break;1083 1084 case LPFC_VPORT_FAILED:1085 len += scnprintf(buf + len, PAGE_SIZE - len,1086 "Failed\n");1087 break;1088 1089 case LPFC_VPORT_UNKNOWN:1090 len += scnprintf(buf + len, PAGE_SIZE - len,1091 "Unknown\n");1092 break;1093 }1094 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {1095 if (test_bit(FC_PUBLIC_LOOP, &vport->fc_flag))1096 len += scnprintf(buf + len, PAGE_SIZE-len,1097 " Public Loop\n");1098 else1099 len += scnprintf(buf + len, PAGE_SIZE-len,1100 " Private Loop\n");1101 } else {1102 if (test_bit(FC_FABRIC, &vport->fc_flag)) {1103 if (phba->sli_rev == LPFC_SLI_REV4 &&1104 vport->port_type == LPFC_PHYSICAL_PORT &&1105 phba->sli4_hba.fawwpn_flag &1106 LPFC_FAWWPN_FABRIC)1107 len += scnprintf(buf + len,1108 PAGE_SIZE - len,1109 " Fabric FA-PWWN\n");1110 else1111 len += scnprintf(buf + len,1112 PAGE_SIZE - len,1113 " Fabric\n");1114 } else {1115 len += scnprintf(buf + len, PAGE_SIZE-len,1116 " Point-2-Point\n");1117 }1118 }1119 }1120 1121 if ((phba->sli_rev == LPFC_SLI_REV4) &&1122 ((bf_get(lpfc_sli_intf_if_type,1123 &phba->sli4_hba.sli_intf) ==1124 LPFC_SLI_INTF_IF_TYPE_6))) {1125 struct lpfc_trunk_link link = phba->trunk_link;1126 1127 if (bf_get(lpfc_conf_trunk_port0, &phba->sli4_hba))1128 len += scnprintf(buf + len, PAGE_SIZE - len,1129 "Trunk port 0: Link %s %s\n",1130 (link.link0.state == LPFC_LINK_UP) ?1131 "Up" : "Down. ",1132 trunk_errmsg[link.link0.fault]);1133 1134 if (bf_get(lpfc_conf_trunk_port1, &phba->sli4_hba))1135 len += scnprintf(buf + len, PAGE_SIZE - len,1136 "Trunk port 1: Link %s %s\n",1137 (link.link1.state == LPFC_LINK_UP) ?1138 "Up" : "Down. ",1139 trunk_errmsg[link.link1.fault]);1140 1141 if (bf_get(lpfc_conf_trunk_port2, &phba->sli4_hba))1142 len += scnprintf(buf + len, PAGE_SIZE - len,1143 "Trunk port 2: Link %s %s\n",1144 (link.link2.state == LPFC_LINK_UP) ?1145 "Up" : "Down. ",1146 trunk_errmsg[link.link2.fault]);1147 1148 if (bf_get(lpfc_conf_trunk_port3, &phba->sli4_hba))1149 len += scnprintf(buf + len, PAGE_SIZE - len,1150 "Trunk port 3: Link %s %s\n",1151 (link.link3.state == LPFC_LINK_UP) ?1152 "Up" : "Down. ",1153 trunk_errmsg[link.link3.fault]);1154 1155 }1156 1157 return len;1158}1159 1160/**1161 * lpfc_sli4_protocol_show - Return the fip mode of the HBA1162 * @dev: class unused variable.1163 * @attr: device attribute, not used.1164 * @buf: on return contains the module description text.1165 *1166 * Returns: size of formatted string.1167 **/1168static ssize_t1169lpfc_sli4_protocol_show(struct device *dev, struct device_attribute *attr,1170 char *buf)1171{1172 struct Scsi_Host *shost = class_to_shost(dev);1173 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;1174 struct lpfc_hba *phba = vport->phba;1175 1176 if (phba->sli_rev < LPFC_SLI_REV4)1177 return scnprintf(buf, PAGE_SIZE, "fc\n");1178 1179 if (phba->sli4_hba.lnk_info.lnk_dv == LPFC_LNK_DAT_VAL) {1180 if (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_GE)1181 return scnprintf(buf, PAGE_SIZE, "fcoe\n");1182 if (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_FC)1183 return scnprintf(buf, PAGE_SIZE, "fc\n");1184 }1185 return scnprintf(buf, PAGE_SIZE, "unknown\n");1186}1187 1188/**1189 * lpfc_oas_supported_show - Return whether or not Optimized Access Storage1190 * (OAS) is supported.1191 * @dev: class unused variable.1192 * @attr: device attribute, not used.1193 * @buf: on return contains the module description text.1194 *1195 * Returns: size of formatted string.1196 **/1197static ssize_t1198lpfc_oas_supported_show(struct device *dev, struct device_attribute *attr,1199 char *buf)1200{1201 struct Scsi_Host *shost = class_to_shost(dev);1202 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;1203 struct lpfc_hba *phba = vport->phba;1204 1205 return scnprintf(buf, PAGE_SIZE, "%d\n",1206 phba->sli4_hba.pc_sli4_params.oas_supported);1207}1208 1209/**1210 * lpfc_link_state_store - Transition the link_state on an HBA port1211 * @dev: class device that is converted into a Scsi_host.1212 * @attr: device attribute, not used.1213 * @buf: one or more lpfc_polling_flags values.1214 * @count: not used.1215 *1216 * Returns:1217 * -EINVAL if the buffer is not "up" or "down"1218 * return from link state change function if non-zero1219 * length of the buf on success1220 **/1221static ssize_t1222lpfc_link_state_store(struct device *dev, struct device_attribute *attr,1223 const char *buf, size_t count)1224{1225 struct Scsi_Host *shost = class_to_shost(dev);1226 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;1227 struct lpfc_hba *phba = vport->phba;1228 1229 int status = -EINVAL;1230 1231 if ((strncmp(buf, "up", sizeof("up") - 1) == 0) &&1232 (phba->link_state == LPFC_LINK_DOWN))1233 status = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);1234 else if ((strncmp(buf, "down", sizeof("down") - 1) == 0) &&1235 (phba->link_state >= LPFC_LINK_UP))1236 status = phba->lpfc_hba_down_link(phba, MBX_NOWAIT);1237 1238 if (status == 0)1239 return strlen(buf);1240 else1241 return status;1242}1243 1244/**1245 * lpfc_num_discovered_ports_show - Return sum of mapped and unmapped vports1246 * @dev: class device that is converted into a Scsi_host.1247 * @attr: device attribute, not used.1248 * @buf: on return contains the sum of fc mapped and unmapped.1249 *1250 * Description:1251 * Returns the ascii text number of the sum of the fc mapped and unmapped1252 * vport counts.1253 *1254 * Returns: size of formatted string.1255 **/1256static ssize_t1257lpfc_num_discovered_ports_show(struct device *dev,1258 struct device_attribute *attr, char *buf)1259{1260 struct Scsi_Host *shost = class_to_shost(dev);1261 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;1262 1263 return scnprintf(buf, PAGE_SIZE, "%d\n",1264 atomic_read(&vport->fc_map_cnt) +1265 atomic_read(&vport->fc_unmap_cnt));1266}1267 1268/**1269 * lpfc_issue_lip - Misnomer, name carried over from long ago1270 * @shost: Scsi_Host pointer.1271 *1272 * Description:1273 * Bring the link down gracefully then re-init the link. The firmware will1274 * re-init the fiber channel interface as required. Does not issue a LIP.1275 *1276 * Returns:1277 * -EPERM port offline or management commands are being blocked1278 * -ENOMEM cannot allocate memory for the mailbox command1279 * -EIO error sending the mailbox command1280 * zero for success1281 **/1282static int1283lpfc_issue_lip(struct Scsi_Host *shost)1284{1285 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;1286 struct lpfc_hba *phba = vport->phba;1287 LPFC_MBOXQ_t *pmboxq;1288 int mbxstatus = MBXERR_ERROR;1289 1290 /*1291 * If the link is offline, disabled or BLOCK_MGMT_IO1292 * it doesn't make any sense to allow issue_lip1293 */1294 if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag) ||1295 test_bit(LINK_DISABLED, &phba->hba_flag) ||1296 (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO))1297 return -EPERM;1298 1299 pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);1300 1301 if (!pmboxq)1302 return -ENOMEM;1303 1304 memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));1305 pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK;1306 pmboxq->u.mb.mbxOwner = OWN_HOST;1307 1308 if (test_bit(FC_PT2PT, &vport->fc_flag))1309 clear_bit(FC_PT2PT_NO_NVME, &vport->fc_flag);1310 1311 mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2);1312 1313 if ((mbxstatus == MBX_SUCCESS) &&1314 (pmboxq->u.mb.mbxStatus == 0 ||1315 pmboxq->u.mb.mbxStatus == MBXERR_LINK_DOWN)) {1316 memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));1317 lpfc_init_link(phba, pmboxq, phba->cfg_topology,1318 phba->cfg_link_speed);1319 mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq,1320 phba->fc_ratov * 2);1321 if ((mbxstatus == MBX_SUCCESS) &&1322 (pmboxq->u.mb.mbxStatus == MBXERR_SEC_NO_PERMISSION))1323 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,1324 "2859 SLI authentication is required "1325 "for INIT_LINK but has not done yet\n");1326 }1327 1328 lpfc_set_loopback_flag(phba);1329 if (mbxstatus != MBX_TIMEOUT)1330 mempool_free(pmboxq, phba->mbox_mem_pool);1331 1332 if (mbxstatus == MBXERR_ERROR)1333 return -EIO;1334 1335 return 0;1336}1337 1338int1339lpfc_emptyq_wait(struct lpfc_hba *phba, struct list_head *q, spinlock_t *lock)1340{1341 int cnt = 0;1342 1343 spin_lock_irq(lock);1344 while (!list_empty(q)) {1345 spin_unlock_irq(lock);1346 msleep(20);1347 if (cnt++ > 250) { /* 5 secs */1348 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,1349 "0466 Outstanding IO when "1350 "bringing Adapter offline\n");1351 return 0;1352 }1353 spin_lock_irq(lock);1354 }1355 spin_unlock_irq(lock);1356 return 1;1357}1358 1359/**1360 * lpfc_do_offline - Issues a mailbox command to bring the link down1361 * @phba: lpfc_hba pointer.1362 * @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL.1363 *1364 * Notes:1365 * Assumes any error from lpfc_do_offline() will be negative.1366 * Can wait up to 5 seconds for the port ring buffers count1367 * to reach zero, prints a warning if it is not zero and continues.1368 * lpfc_workq_post_event() returns a non-zero return code if call fails.1369 *1370 * Returns:1371 * -EIO error posting the event1372 * zero for success1373 **/1374static int1375lpfc_do_offline(struct lpfc_hba *phba, uint32_t type)1376{1377 struct completion online_compl;1378 struct lpfc_queue *qp = NULL;1379 struct lpfc_sli_ring *pring;1380 struct lpfc_sli *psli;1381 int status = 0;1382 int i;1383 int rc;1384 1385 init_completion(&online_compl);1386 rc = lpfc_workq_post_event(phba, &status, &online_compl,1387 LPFC_EVT_OFFLINE_PREP);1388 if (rc == 0)1389 return -ENOMEM;1390 1391 wait_for_completion(&online_compl);1392 1393 if (status != 0)1394 return -EIO;1395 1396 psli = &phba->sli;1397 1398 /*1399 * If freeing the queues have already started, don't access them.1400 * Otherwise set FREE_WAIT to indicate that queues are being used1401 * to hold the freeing process until we finish.1402 */1403 spin_lock_irq(&phba->hbalock);1404 if (!(psli->sli_flag & LPFC_QUEUE_FREE_INIT)) {1405 psli->sli_flag |= LPFC_QUEUE_FREE_WAIT;1406 } else {1407 spin_unlock_irq(&phba->hbalock);1408 goto skip_wait;1409 }1410 spin_unlock_irq(&phba->hbalock);1411 1412 /* Wait a little for things to settle down, but not1413 * long enough for dev loss timeout to expire.1414 */1415 if (phba->sli_rev != LPFC_SLI_REV4) {1416 for (i = 0; i < psli->num_rings; i++) {1417 pring = &psli->sli3_ring[i];1418 if (!lpfc_emptyq_wait(phba, &pring->txcmplq,1419 &phba->hbalock))1420 goto out;1421 }1422 } else {1423 list_for_each_entry(qp, &phba->sli4_hba.lpfc_wq_list, wq_list) {1424 pring = qp->pring;1425 if (!pring)1426 continue;1427 if (!lpfc_emptyq_wait(phba, &pring->txcmplq,1428 &pring->ring_lock))1429 goto out;1430 }1431 }1432out:1433 spin_lock_irq(&phba->hbalock);1434 psli->sli_flag &= ~LPFC_QUEUE_FREE_WAIT;1435 spin_unlock_irq(&phba->hbalock);1436 1437skip_wait:1438 init_completion(&online_compl);1439 rc = lpfc_workq_post_event(phba, &status, &online_compl, type);1440 if (rc == 0)1441 return -ENOMEM;1442 1443 wait_for_completion(&online_compl);1444 1445 if (status != 0)1446 return -EIO;1447 1448 return 0;1449}1450 1451/**1452 * lpfc_reset_pci_bus - resets PCI bridge controller's secondary bus of an HBA1453 * @phba: lpfc_hba pointer.1454 *1455 * Description:1456 * Issues a PCI secondary bus reset for the phba->pcidev.1457 *1458 * Notes:1459 * First walks the bus_list to ensure only PCI devices with Emulex1460 * vendor id, device ids that support hot reset, only one occurrence1461 * of function 0, and all ports on the bus are in offline mode to ensure the1462 * hot reset only affects one valid HBA.1463 *1464 * Returns:1465 * -ENOTSUPP, cfg_enable_hba_reset must be of value 21466 * -ENODEV, NULL ptr to pcidev1467 * -EBADSLT, detected invalid device1468 * -EBUSY, port is not in offline state1469 * 0, successful1470 */1471static int1472lpfc_reset_pci_bus(struct lpfc_hba *phba)1473{1474 struct pci_dev *pdev = phba->pcidev;1475 struct Scsi_Host *shost = NULL;1476 struct lpfc_hba *phba_other = NULL;1477 struct pci_dev *ptr = NULL;1478 int res;1479 1480 if (phba->cfg_enable_hba_reset != 2)1481 return -ENOTSUPP;1482 1483 if (!pdev) {1484 lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "8345 pdev NULL!\n");1485 return -ENODEV;1486 }1487 1488 res = lpfc_check_pci_resettable(phba);1489 if (res)1490 return res;1491 1492 /* Walk the list of devices on the pci_dev's bus */1493 list_for_each_entry(ptr, &pdev->bus->devices, bus_list) {1494 /* Check port is offline */1495 shost = pci_get_drvdata(ptr);1496 if (shost) {1497 phba_other =1498 ((struct lpfc_vport *)shost->hostdata)->phba;1499 if (!test_bit(FC_OFFLINE_MODE,1500 &phba_other->pport->fc_flag)) {1501 lpfc_printf_log(phba_other, KERN_INFO, LOG_INIT,1502 "8349 WWPN = 0x%02x%02x%02x%02x"1503 "%02x%02x%02x%02x is not "1504 "offline!\n",1505 phba_other->wwpn[0],1506 phba_other->wwpn[1],1507 phba_other->wwpn[2],1508 phba_other->wwpn[3],1509 phba_other->wwpn[4],1510 phba_other->wwpn[5],1511 phba_other->wwpn[6],1512 phba_other->wwpn[7]);1513 return -EBUSY;1514 }1515 }1516 }1517 1518 /* Issue PCI bus reset */1519 res = pci_reset_bus(pdev);1520 if (res) {1521 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,1522 "8350 PCI reset bus failed: %d\n", res);1523 }1524 1525 return res;1526}1527 1528/**1529 * lpfc_selective_reset - Offline then onlines the port1530 * @phba: lpfc_hba pointer.1531 *1532 * Description:1533 * If the port is configured to allow a reset then the hba is brought1534 * offline then online.1535 *1536 * Notes:1537 * Assumes any error from lpfc_do_offline() will be negative.1538 * Do not make this function static.1539 *1540 * Returns:1541 * lpfc_do_offline() return code if not zero1542 * -EIO reset not configured or error posting the event1543 * zero for success1544 **/1545int1546lpfc_selective_reset(struct lpfc_hba *phba)1547{1548 struct completion online_compl;1549 int status = 0;1550 int rc;1551 1552 if (!phba->cfg_enable_hba_reset)1553 return -EACCES;1554 1555 if (!test_bit(FC_OFFLINE_MODE, &phba->pport->fc_flag)) {1556 status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);1557 1558 if (status != 0)1559 return status;1560 }1561 1562 init_completion(&online_compl);1563 rc = lpfc_workq_post_event(phba, &status, &online_compl,1564 LPFC_EVT_ONLINE);1565 if (rc == 0)1566 return -ENOMEM;1567 1568 wait_for_completion(&online_compl);1569 1570 if (status != 0)1571 return -EIO;1572 1573 return 0;1574}1575 1576/**1577 * lpfc_issue_reset - Selectively resets an adapter1578 * @dev: class device that is converted into a Scsi_host.1579 * @attr: device attribute, not used.1580 * @buf: containing the string "selective".1581 * @count: unused variable.1582 *1583 * Description:1584 * If the buf contains the string "selective" then lpfc_selective_reset()1585 * is called to perform the reset.1586 *1587 * Notes:1588 * Assumes any error from lpfc_selective_reset() will be negative.1589 * If lpfc_selective_reset() returns zero then the length of the buffer1590 * is returned which indicates success1591 *1592 * Returns:1593 * -EINVAL if the buffer does not contain the string "selective"1594 * length of buf if lpfc-selective_reset() if the call succeeds1595 * return value of lpfc_selective_reset() if the call fails1596**/1597static ssize_t1598lpfc_issue_reset(struct device *dev, struct device_attribute *attr,1599 const char *buf, size_t count)1600{1601 struct Scsi_Host *shost = class_to_shost(dev);1602 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;1603 struct lpfc_hba *phba = vport->phba;1604 int status = -EINVAL;1605 1606 if (!phba->cfg_enable_hba_reset)1607 return -EACCES;1608 1609 if (strncmp(buf, "selective", sizeof("selective") - 1) == 0)1610 status = phba->lpfc_selective_reset(phba);1611 1612 if (status == 0)1613 return strlen(buf);1614 else1615 return status;1616}1617 1618/**1619 * lpfc_sli4_pdev_status_reg_wait - Wait for pdev status register for readyness1620 * @phba: lpfc_hba pointer.1621 *1622 * Description:1623 * SLI4 interface type-2 device to wait on the sliport status register for1624 * the readyness after performing a firmware reset.1625 *1626 * Returns:1627 * zero for success, -EPERM when port does not have privilege to perform the1628 * reset, -EIO when port timeout from recovering from the reset.1629 *1630 * Note:1631 * As the caller will interpret the return code by value, be careful in making1632 * change or addition to return codes.1633 **/1634int1635lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *phba)1636{1637 struct lpfc_register portstat_reg = {0};1638 int i;1639 1640 msleep(100);1641 if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,1642 &portstat_reg.word0))1643 return -EIO;1644 1645 /* verify if privileged for the request operation */1646 if (!bf_get(lpfc_sliport_status_rn, &portstat_reg) &&1647 !bf_get(lpfc_sliport_status_err, &portstat_reg))1648 return -EPERM;1649 1650 /* There is no point to wait if the port is in an unrecoverable1651 * state.1652 */1653 if (lpfc_sli4_unrecoverable_port(&portstat_reg))1654 return -EIO;1655 1656 /* wait for the SLI port firmware ready after firmware reset */1657 for (i = 0; i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT; i++) {1658 msleep(10);1659 if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,1660 &portstat_reg.word0))1661 continue;1662 if (!bf_get(lpfc_sliport_status_err, &portstat_reg))1663 continue;1664 if (!bf_get(lpfc_sliport_status_rn, &portstat_reg))1665 continue;1666 if (!bf_get(lpfc_sliport_status_rdy, &portstat_reg))1667 continue;1668 break;1669 }1670 1671 if (i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT)1672 return 0;1673 else1674 return -EIO;1675}1676 1677/**1678 * lpfc_sli4_pdev_reg_request - Request physical dev to perform a register acc1679 * @phba: lpfc_hba pointer.1680 * @opcode: The sli4 config command opcode.1681 *1682 * Description:1683 * Request SLI4 interface type-2 device to perform a physical register set1684 * access.1685 *1686 * Returns:1687 * zero for success1688 **/1689static ssize_t1690lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)1691{1692 struct completion online_compl;1693 struct pci_dev *pdev = phba->pcidev;1694 unsigned long before_fc_flag;1695 uint32_t sriov_nr_virtfn;1696 uint32_t reg_val;1697 int status = 0, rc = 0;1698 int job_posted = 1, sriov_err;1699 1700 if (!phba->cfg_enable_hba_reset)1701 return -EACCES;1702 1703 if ((phba->sli_rev < LPFC_SLI_REV4) ||1704 (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <1705 LPFC_SLI_INTF_IF_TYPE_2))1706 return -EPERM;1707 1708 /* Keep state if we need to restore back */1709 before_fc_flag = phba->pport->fc_flag;1710 sriov_nr_virtfn = phba->cfg_sriov_nr_virtfn;1711 1712 if (opcode == LPFC_FW_DUMP) {1713 init_completion(&online_compl);1714 phba->fw_dump_cmpl = &online_compl;1715 } else {1716 /* Disable SR-IOV virtual functions if enabled */1717 if (phba->cfg_sriov_nr_virtfn) {1718 pci_disable_sriov(pdev);1719 phba->cfg_sriov_nr_virtfn = 0;1720 }1721 1722 status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);1723 1724 if (status != 0)1725 return status;1726 1727 /* wait for the device to be quiesced before firmware reset */1728 msleep(100);1729 }1730 1731 reg_val = readl(phba->sli4_hba.conf_regs_memmap_p +1732 LPFC_CTL_PDEV_CTL_OFFSET);1733 1734 if (opcode == LPFC_FW_DUMP)1735 reg_val |= LPFC_FW_DUMP_REQUEST;1736 else if (opcode == LPFC_FW_RESET)1737 reg_val |= LPFC_CTL_PDEV_CTL_FRST;1738 else if (opcode == LPFC_DV_RESET)1739 reg_val |= LPFC_CTL_PDEV_CTL_DRST;1740 1741 writel(reg_val, phba->sli4_hba.conf_regs_memmap_p +1742 LPFC_CTL_PDEV_CTL_OFFSET);1743 /* flush */1744 readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET);1745 1746 /* delay driver action following IF_TYPE_2 reset */1747 rc = lpfc_sli4_pdev_status_reg_wait(phba);1748 1749 if (rc == -EPERM) {1750 /* no privilege for reset */1751 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,1752 "3150 No privilege to perform the requested "1753 "access: x%x\n", reg_val);1754 } else if (rc == -EIO) {1755 /* reset failed, there is nothing more we can do */1756 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,1757 "3153 Fail to perform the requested "1758 "access: x%x\n", reg_val);1759 if (phba->fw_dump_cmpl)1760 phba->fw_dump_cmpl = NULL;1761 return rc;1762 }1763 1764 /* keep the original port state */1765 if (test_bit(FC_OFFLINE_MODE, &before_fc_flag)) {1766 if (phba->fw_dump_cmpl)1767 phba->fw_dump_cmpl = NULL;1768 goto out;1769 }1770 1771 /* Firmware dump will trigger an HA_ERATT event, and1772 * lpfc_handle_eratt_s4 routine already handles bringing the port back1773 * online.1774 */1775 if (opcode == LPFC_FW_DUMP) {1776 wait_for_completion(phba->fw_dump_cmpl);1777 } else {1778 init_completion(&online_compl);1779 job_posted = lpfc_workq_post_event(phba, &status, &online_compl,1780 LPFC_EVT_ONLINE);1781 if (!job_posted)1782 goto out;1783 1784 wait_for_completion(&online_compl);1785 }1786out:1787 /* in any case, restore the virtual functions enabled as before */1788 if (sriov_nr_virtfn) {1789 /* If fw_dump was performed, first disable to clean up */1790 if (opcode == LPFC_FW_DUMP) {1791 pci_disable_sriov(pdev);1792 phba->cfg_sriov_nr_virtfn = 0;1793 }1794 1795 sriov_err =1796 lpfc_sli_probe_sriov_nr_virtfn(phba, sriov_nr_virtfn);1797 if (!sriov_err)1798 phba->cfg_sriov_nr_virtfn = sriov_nr_virtfn;1799 }1800 1801 /* return proper error code */1802 if (!rc) {1803 if (!job_posted)1804 rc = -ENOMEM;1805 else if (status)1806 rc = -EIO;1807 }1808 return rc;1809}1810 1811/**1812 * lpfc_nport_evt_cnt_show - Return the number of nport events1813 * @dev: class device that is converted into a Scsi_host.1814 * @attr: device attribute, not used.1815 * @buf: on return contains the ascii number of nport events.1816 *1817 * Returns: size of formatted string.1818 **/1819static ssize_t1820lpfc_nport_evt_cnt_show(struct device *dev, struct device_attribute *attr,1821 char *buf)1822{1823 struct Scsi_Host *shost = class_to_shost(dev);1824 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;1825 struct lpfc_hba *phba = vport->phba;1826 1827 return scnprintf(buf, PAGE_SIZE, "%d\n", phba->nport_event_cnt);1828}1829 1830static int1831lpfc_set_trunking(struct lpfc_hba *phba, char *buff_out)1832{1833 LPFC_MBOXQ_t *mbox = NULL;1834 u32 payload_len;1835 unsigned long val = 0;1836 char *pval = NULL;1837 int rc = 0;1838 1839 if (!strncmp("enable", buff_out,1840 strlen("enable"))) {1841 pval = buff_out + strlen("enable") + 1;1842 rc = kstrtoul(pval, 0, &val);1843 if (rc)1844 return rc; /* Invalid number */1845 } else if (!strncmp("disable", buff_out,1846 strlen("disable"))) {1847 val = 0;1848 } else {1849 return -EINVAL; /* Invalid command */1850 }1851 1852 switch (val) {1853 case 0:1854 val = 0x0; /* Disable */1855 break;1856 case 2:1857 val = 0x1; /* Enable two port trunk */1858 break;1859 case 4:1860 val = 0x2; /* Enable four port trunk */1861 break;1862 default:1863 return -EINVAL;1864 }1865 1866 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,1867 "0070 Set trunk mode with val %ld ", val);1868 1869 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);1870 if (!mbox)1871 return -ENOMEM;1872 1873 payload_len = sizeof(struct lpfc_mbx_set_trunk_mode) -1874 sizeof(struct lpfc_sli4_cfg_mhdr);1875 lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,1876 LPFC_MBOX_OPCODE_FCOE_FC_SET_TRUNK_MODE,1877 payload_len, LPFC_SLI4_MBX_EMBED);1878 1879 bf_set(lpfc_mbx_set_trunk_mode,1880 &mbox->u.mqe.un.set_trunk_mode,1881 val);1882 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);1883 if (rc)1884 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,1885 "0071 Set trunk mode failed with status: %d",1886 rc);1887 mempool_free(mbox, phba->mbox_mem_pool);1888 1889 return 0;1890}1891 1892static ssize_t1893lpfc_xcvr_data_show(struct device *dev, struct device_attribute *attr,1894 char *buf)1895{1896 struct Scsi_Host *shost = class_to_shost(dev);1897 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;1898 struct lpfc_hba *phba = vport->phba;1899 int rc;1900 int len = 0;1901 struct lpfc_rdp_context *rdp_context;1902 u16 temperature;1903 u16 rx_power;1904 u16 tx_bias;1905 u16 tx_power;1906 u16 vcc;1907 char chbuf[128];1908 u16 wavelength = 0;1909 struct sff_trasnceiver_codes_byte7 *trasn_code_byte7;1910 1911 /* Get transceiver information */1912 rdp_context = kmalloc(sizeof(*rdp_context), GFP_KERNEL);1913 if (!rdp_context) {1914 len = scnprintf(buf, PAGE_SIZE - len,1915 "SPF info NA: alloc failure\n");1916 return len;1917 }1918 1919 rc = lpfc_get_sfp_info_wait(phba, rdp_context);1920 if (rc) {1921 len = scnprintf(buf, PAGE_SIZE - len, "SFP info NA:\n");1922 goto out_free_rdp;1923 }1924 1925 strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_NAME], 16);1926 1927 len = scnprintf(buf, PAGE_SIZE - len, "VendorName:\t%s\n", chbuf);1928 len += scnprintf(buf + len, PAGE_SIZE - len,1929 "VendorOUI:\t%02x-%02x-%02x\n",1930 (uint8_t)rdp_context->page_a0[SSF_VENDOR_OUI],1931 (uint8_t)rdp_context->page_a0[SSF_VENDOR_OUI + 1],1932 (uint8_t)rdp_context->page_a0[SSF_VENDOR_OUI + 2]);1933 strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_PN], 16);1934 len += scnprintf(buf + len, PAGE_SIZE - len, "VendorPN:\t%s\n", chbuf);1935 strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_SN], 16);1936 len += scnprintf(buf + len, PAGE_SIZE - len, "VendorSN:\t%s\n", chbuf);1937 strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_REV], 4);1938 len += scnprintf(buf + len, PAGE_SIZE - len, "VendorRev:\t%s\n", chbuf);1939 strscpy(chbuf, &rdp_context->page_a0[SSF_DATE_CODE], 8);1940 len += scnprintf(buf + len, PAGE_SIZE - len, "DateCode:\t%s\n", chbuf);1941 len += scnprintf(buf + len, PAGE_SIZE - len, "Identifier:\t%xh\n",1942 (uint8_t)rdp_context->page_a0[SSF_IDENTIFIER]);1943 len += scnprintf(buf + len, PAGE_SIZE - len, "ExtIdentifier:\t%xh\n",1944 (uint8_t)rdp_context->page_a0[SSF_EXT_IDENTIFIER]);1945 len += scnprintf(buf + len, PAGE_SIZE - len, "Connector:\t%xh\n",1946 (uint8_t)rdp_context->page_a0[SSF_CONNECTOR]);1947 wavelength = (rdp_context->page_a0[SSF_WAVELENGTH_B1] << 8) |1948 rdp_context->page_a0[SSF_WAVELENGTH_B0];1949 1950 len += scnprintf(buf + len, PAGE_SIZE - len, "Wavelength:\t%d nm\n",1951 wavelength);1952 trasn_code_byte7 = (struct sff_trasnceiver_codes_byte7 *)1953 &rdp_context->page_a0[SSF_TRANSCEIVER_CODE_B7];1954 1955 len += scnprintf(buf + len, PAGE_SIZE - len, "Speeds: \t");1956 if (*(uint8_t *)trasn_code_byte7 == 0) {1957 len += scnprintf(buf + len, PAGE_SIZE - len, "Unknown\n");1958 } else {1959 if (trasn_code_byte7->fc_sp_100MB)1960 len += scnprintf(buf + len, PAGE_SIZE - len, "1 ");1961 if (trasn_code_byte7->fc_sp_200mb)1962 len += scnprintf(buf + len, PAGE_SIZE - len, "2 ");1963 if (trasn_code_byte7->fc_sp_400MB)1964 len += scnprintf(buf + len, PAGE_SIZE - len, "4 ");1965 if (trasn_code_byte7->fc_sp_800MB)1966 len += scnprintf(buf + len, PAGE_SIZE - len, "8 ");1967 if (trasn_code_byte7->fc_sp_1600MB)1968 len += scnprintf(buf + len, PAGE_SIZE - len, "16 ");1969 if (trasn_code_byte7->fc_sp_3200MB)1970 len += scnprintf(buf + len, PAGE_SIZE - len, "32 ");1971 if (trasn_code_byte7->speed_chk_ecc)1972 len += scnprintf(buf + len, PAGE_SIZE - len, "64 ");1973 len += scnprintf(buf + len, PAGE_SIZE - len, "GB\n");1974 }1975 temperature = (rdp_context->page_a2[SFF_TEMPERATURE_B1] << 8 |1976 rdp_context->page_a2[SFF_TEMPERATURE_B0]);1977 vcc = (rdp_context->page_a2[SFF_VCC_B1] << 8 |1978 rdp_context->page_a2[SFF_VCC_B0]);1979 tx_power = (rdp_context->page_a2[SFF_TXPOWER_B1] << 8 |1980 rdp_context->page_a2[SFF_TXPOWER_B0]);1981 tx_bias = (rdp_context->page_a2[SFF_TX_BIAS_CURRENT_B1] << 8 |1982 rdp_context->page_a2[SFF_TX_BIAS_CURRENT_B0]);1983 rx_power = (rdp_context->page_a2[SFF_RXPOWER_B1] << 8 |1984 rdp_context->page_a2[SFF_RXPOWER_B0]);1985 1986 len += scnprintf(buf + len, PAGE_SIZE - len,1987 "Temperature:\tx%04x C\n", temperature);1988 len += scnprintf(buf + len, PAGE_SIZE - len, "Vcc:\t\tx%04x V\n", vcc);1989 len += scnprintf(buf + len, PAGE_SIZE - len,1990 "TxBiasCurrent:\tx%04x mA\n", tx_bias);1991 len += scnprintf(buf + len, PAGE_SIZE - len, "TxPower:\tx%04x mW\n",1992 tx_power);1993 len += scnprintf(buf + len, PAGE_SIZE - len, "RxPower:\tx%04x mW\n",1994 rx_power);1995out_free_rdp:1996 kfree(rdp_context);1997 return len;1998}1999 2000/**2001 * lpfc_board_mode_show - Return the state of the board2002 * @dev: class device that is converted into a Scsi_host.2003 * @attr: device attribute, not used.2004 * @buf: on return contains the state of the adapter.2005 *2006 * Returns: size of formatted string.2007 **/2008static ssize_t2009lpfc_board_mode_show(struct device *dev, struct device_attribute *attr,2010 char *buf)2011{2012 struct Scsi_Host *shost = class_to_shost(dev);2013 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;2014 struct lpfc_hba *phba = vport->phba;2015 char * state;2016 2017 if (phba->link_state == LPFC_HBA_ERROR)2018 state = "error";2019 else if (phba->link_state == LPFC_WARM_START)2020 state = "warm start";2021 else if (phba->link_state == LPFC_INIT_START)2022 state = "offline";2023 else2024 state = "online";2025 2026 return scnprintf(buf, PAGE_SIZE, "%s\n", state);2027}2028 2029/**2030 * lpfc_board_mode_store - Puts the hba in online, offline, warm or error state2031 * @dev: class device that is converted into a Scsi_host.2032 * @attr: device attribute, not used.2033 * @buf: containing one of the strings "online", "offline", "warm" or "error".2034 * @count: unused variable.2035 *2036 * Returns:2037 * -EACCES if enable hba reset not enabled2038 * -EINVAL if the buffer does not contain a valid string (see above)2039 * -EIO if lpfc_workq_post_event() or lpfc_do_offline() fails2040 * buf length greater than zero indicates success2041 **/2042static ssize_t2043lpfc_board_mode_store(struct device *dev, struct device_attribute *attr,2044 const char *buf, size_t count)2045{2046 struct Scsi_Host *shost = class_to_shost(dev);2047 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;2048 struct lpfc_hba *phba = vport->phba;2049 struct completion online_compl;2050 char *board_mode_str = NULL;2051 int status = 0;2052 int rc;2053 2054 if (!phba->cfg_enable_hba_reset) {2055 status = -EACCES;2056 goto board_mode_out;2057 }2058 2059 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,2060 "3050 lpfc_board_mode set to %s\n", buf);2061 2062 init_completion(&online_compl);2063 2064 if(strncmp(buf, "online", sizeof("online") - 1) == 0) {2065 rc = lpfc_workq_post_event(phba, &status, &online_compl,2066 LPFC_EVT_ONLINE);2067 if (rc == 0) {2068 status = -ENOMEM;2069 goto board_mode_out;2070 }2071 wait_for_completion(&online_compl);2072 if (status)2073 status = -EIO;2074 } else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)2075 status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);2076 else if (strncmp(buf, "warm", sizeof("warm") - 1) == 0)2077 if (phba->sli_rev == LPFC_SLI_REV4)2078 status = -EINVAL;2079 else2080 status = lpfc_do_offline(phba, LPFC_EVT_WARM_START);2081 else if (strncmp(buf, "error", sizeof("error") - 1) == 0)2082 if (phba->sli_rev == LPFC_SLI_REV4)2083 status = -EINVAL;2084 else2085 status = lpfc_do_offline(phba, LPFC_EVT_KILL);2086 else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0)2087 status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_DUMP);2088 else if (strncmp(buf, "fw_reset", sizeof("fw_reset") - 1) == 0)2089 status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_RESET);2090 else if (strncmp(buf, "dv_reset", sizeof("dv_reset") - 1) == 0)2091 status = lpfc_sli4_pdev_reg_request(phba, LPFC_DV_RESET);2092 else if (strncmp(buf, "pci_bus_reset", sizeof("pci_bus_reset") - 1)2093 == 0)2094 status = lpfc_reset_pci_bus(phba);2095 else if (strncmp(buf, "heartbeat", sizeof("heartbeat") - 1) == 0)2096 lpfc_issue_hb_tmo(phba);2097 else if (strncmp(buf, "trunk", sizeof("trunk") - 1) == 0)2098 status = lpfc_set_trunking(phba, (char *)buf + sizeof("trunk"));2099 else2100 status = -EINVAL;2101 2102board_mode_out:2103 if (!status)2104 return strlen(buf);2105 else {2106 board_mode_str = strchr(buf, '\n');2107 if (board_mode_str)2108 *board_mode_str = '\0';2109 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,2110 "3097 Failed \"%s\", status(%d), "2111 "fc_flag(x%lx)\n",2112 buf, status, phba->pport->fc_flag);2113 return status;2114 }2115}2116 2117/**2118 * lpfc_get_hba_info - Return various bits of informaton about the adapter2119 * @phba: pointer to the adapter structure.2120 * @mxri: max xri count.2121 * @axri: available xri count.2122 * @mrpi: max rpi count.2123 * @arpi: available rpi count.2124 * @mvpi: max vpi count.2125 * @avpi: available vpi count.2126 *2127 * Description:2128 * If an integer pointer for an count is not null then the value for the2129 * count is returned.2130 *2131 * Returns:2132 * zero on error2133 * one for success2134 **/2135static int2136lpfc_get_hba_info(struct lpfc_hba *phba,2137 uint32_t *mxri, uint32_t *axri,2138 uint32_t *mrpi, uint32_t *arpi,2139 uint32_t *mvpi, uint32_t *avpi)2140{2141 LPFC_MBOXQ_t *pmboxq;2142 MAILBOX_t *pmb;2143 int rc = 0;2144 struct lpfc_sli4_hba *sli4_hba;2145 struct lpfc_max_cfg_param *max_cfg_param;2146 u16 rsrc_ext_cnt, rsrc_ext_size, max_vpi;2147 2148 /*2149 * prevent udev from issuing mailbox commands until the port is2150 * configured.2151 */2152 if (phba->link_state < LPFC_LINK_DOWN ||2153 !phba->mbox_mem_pool ||2154 (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)2155 return 0;2156 2157 if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)2158 return 0;2159 2160 pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);2161 if (!pmboxq)2162 return 0;2163 memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));2164 2165 pmb = &pmboxq->u.mb;2166 pmb->mbxCommand = MBX_READ_CONFIG;2167 pmb->mbxOwner = OWN_HOST;2168 pmboxq->ctx_buf = NULL;2169 2170 if (test_bit(FC_OFFLINE_MODE, &phba->pport->fc_flag))2171 rc = MBX_NOT_FINISHED;2172 else2173 rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);2174 2175 if (rc != MBX_SUCCESS) {2176 if (rc != MBX_TIMEOUT)2177 mempool_free(pmboxq, phba->mbox_mem_pool);2178 return 0;2179 }2180 2181 if (phba->sli_rev == LPFC_SLI_REV4) {2182 sli4_hba = &phba->sli4_hba;2183 max_cfg_param = &sli4_hba->max_cfg_param;2184 2185 /* Normally, extents are not used */2186 if (!phba->sli4_hba.extents_in_use) {2187 if (mrpi)2188 *mrpi = max_cfg_param->max_rpi;2189 if (mxri)2190 *mxri = max_cfg_param->max_xri;2191 if (mvpi) {2192 max_vpi = max_cfg_param->max_vpi;2193 2194 /* Limit the max we support */2195 if (max_vpi > LPFC_MAX_VPI)2196 max_vpi = LPFC_MAX_VPI;2197 *mvpi = max_vpi;2198 }2199 } else { /* Extents in use */2200 if (mrpi) {2201 if (lpfc_sli4_get_avail_extnt_rsrc(phba,2202 LPFC_RSC_TYPE_FCOE_RPI,2203 &rsrc_ext_cnt,2204 &rsrc_ext_size)) {2205 rc = 0;2206 goto free_pmboxq;2207 }2208 2209 *mrpi = rsrc_ext_cnt * rsrc_ext_size;2210 }2211 2212 if (mxri) {2213 if (lpfc_sli4_get_avail_extnt_rsrc(phba,2214 LPFC_RSC_TYPE_FCOE_XRI,2215 &rsrc_ext_cnt,2216 &rsrc_ext_size)) {2217 rc = 0;2218 goto free_pmboxq;2219 }2220 2221 *mxri = rsrc_ext_cnt * rsrc_ext_size;2222 }2223 2224 if (mvpi) {2225 if (lpfc_sli4_get_avail_extnt_rsrc(phba,2226 LPFC_RSC_TYPE_FCOE_VPI,2227 &rsrc_ext_cnt,2228 &rsrc_ext_size)) {2229 rc = 0;2230 goto free_pmboxq;2231 }2232 2233 max_vpi = rsrc_ext_cnt * rsrc_ext_size;2234 2235 /* Limit the max we support */2236 if (max_vpi > LPFC_MAX_VPI)2237 max_vpi = LPFC_MAX_VPI;2238 *mvpi = max_vpi;2239 }2240 }2241 } else {2242 if (mrpi)2243 *mrpi = pmb->un.varRdConfig.max_rpi;2244 if (arpi)2245 *arpi = pmb->un.varRdConfig.avail_rpi;2246 if (mxri)2247 *mxri = pmb->un.varRdConfig.max_xri;2248 if (axri)2249 *axri = pmb->un.varRdConfig.avail_xri;2250 if (mvpi)2251 *mvpi = pmb->un.varRdConfig.max_vpi;2252 if (avpi) {2253 /* avail_vpi is only valid if link is up and ready */2254 if (phba->link_state == LPFC_HBA_READY)2255 *avpi = pmb->un.varRdConfig.avail_vpi;2256 else2257 *avpi = pmb->un.varRdConfig.max_vpi;2258 }2259 }2260 2261 /* Success */2262 rc = 1;2263 2264free_pmboxq:2265 mempool_free(pmboxq, phba->mbox_mem_pool);2266 return rc;2267}2268 2269/**2270 * lpfc_max_rpi_show - Return maximum rpi2271 * @dev: class device that is converted into a Scsi_host.2272 * @attr: device attribute, not used.2273 * @buf: on return contains the maximum rpi count in decimal or "Unknown".2274 *2275 * Description:2276 * Calls lpfc_get_hba_info() asking for just the mrpi count.2277 * If lpfc_get_hba_info() returns zero (failure) the buffer text is set2278 * to "Unknown" and the buffer length is returned, therefore the caller2279 * must check for "Unknown" in the buffer to detect a failure.2280 *2281 * Returns: size of formatted string.2282 **/2283static ssize_t2284lpfc_max_rpi_show(struct device *dev, struct device_attribute *attr,2285 char *buf)2286{2287 struct Scsi_Host *shost = class_to_shost(dev);2288 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;2289 struct lpfc_hba *phba = vport->phba;2290 uint32_t cnt;2291 2292 if (lpfc_get_hba_info(phba, NULL, NULL, &cnt, NULL, NULL, NULL))2293 return scnprintf(buf, PAGE_SIZE, "%d\n", cnt);2294 return scnprintf(buf, PAGE_SIZE, "Unknown\n");2295}2296 2297/**2298 * lpfc_used_rpi_show - Return maximum rpi minus available rpi2299 * @dev: class device that is converted into a Scsi_host.2300 * @attr: device attribute, not used.2301 * @buf: containing the used rpi count in decimal or "Unknown".2302 *2303 * Description:2304 * Calls lpfc_get_hba_info() asking for just the mrpi and arpi counts.2305 * If lpfc_get_hba_info() returns zero (failure) the buffer text is set2306 * to "Unknown" and the buffer length is returned, therefore the caller2307 * must check for "Unknown" in the buffer to detect a failure.2308 *2309 * Returns: size of formatted string.2310 **/2311static ssize_t2312lpfc_used_rpi_show(struct device *dev, struct device_attribute *attr,2313 char *buf)2314{2315 struct Scsi_Host *shost = class_to_shost(dev);2316 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;2317 struct lpfc_hba *phba = vport->phba;2318 struct lpfc_sli4_hba *sli4_hba;2319 struct lpfc_max_cfg_param *max_cfg_param;2320 u32 cnt = 0, acnt = 0;2321 2322 if (phba->sli_rev == LPFC_SLI_REV4) {2323 sli4_hba = &phba->sli4_hba;2324 max_cfg_param = &sli4_hba->max_cfg_param;2325 return scnprintf(buf, PAGE_SIZE, "%d\n",2326 max_cfg_param->rpi_used);2327 } else {2328 if (lpfc_get_hba_info(phba, NULL, NULL, &cnt, &acnt, NULL, NULL))2329 return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));2330 }2331 return scnprintf(buf, PAGE_SIZE, "Unknown\n");2332}2333 2334/**2335 * lpfc_max_xri_show - Return maximum xri2336 * @dev: class device that is converted into a Scsi_host.2337 * @attr: device attribute, not used.2338 * @buf: on return contains the maximum xri count in decimal or "Unknown".2339 *2340 * Description:2341 * Calls lpfc_get_hba_info() asking for just the mrpi count.2342 * If lpfc_get_hba_info() returns zero (failure) the buffer text is set2343 * to "Unknown" and the buffer length is returned, therefore the caller2344 * must check for "Unknown" in the buffer to detect a failure.2345 *2346 * Returns: size of formatted string.2347 **/2348static ssize_t2349lpfc_max_xri_show(struct device *dev, struct device_attribute *attr,2350 char *buf)2351{2352 struct Scsi_Host *shost = class_to_shost(dev);2353 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;2354 struct lpfc_hba *phba = vport->phba;2355 uint32_t cnt;2356 2357 if (lpfc_get_hba_info(phba, &cnt, NULL, NULL, NULL, NULL, NULL))2358 return scnprintf(buf, PAGE_SIZE, "%d\n", cnt);2359 return scnprintf(buf, PAGE_SIZE, "Unknown\n");2360}2361 2362/**2363 * lpfc_used_xri_show - Return maximum xpi minus the available xpi2364 * @dev: class device that is converted into a Scsi_host.2365 * @attr: device attribute, not used.2366 * @buf: on return contains the used xri count in decimal or "Unknown".2367 *2368 * Description:2369 * Calls lpfc_get_hba_info() asking for just the mxri and axri counts.2370 * If lpfc_get_hba_info() returns zero (failure) the buffer text is set2371 * to "Unknown" and the buffer length is returned, therefore the caller2372 * must check for "Unknown" in the buffer to detect a failure.2373 *2374 * Returns: size of formatted string.2375 **/2376static ssize_t2377lpfc_used_xri_show(struct device *dev, struct device_attribute *attr,2378 char *buf)2379{2380 struct Scsi_Host *shost = class_to_shost(dev);2381 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;2382 struct lpfc_hba *phba = vport->phba;2383 struct lpfc_sli4_hba *sli4_hba;2384 struct lpfc_max_cfg_param *max_cfg_param;2385 u32 cnt = 0, acnt = 0;2386 2387 if (phba->sli_rev == LPFC_SLI_REV4) {2388 sli4_hba = &phba->sli4_hba;2389 max_cfg_param = &sli4_hba->max_cfg_param;2390 return scnprintf(buf, PAGE_SIZE, "%d\n",2391 max_cfg_param->xri_used);2392 } else {2393 if (lpfc_get_hba_info(phba, &cnt, &acnt, NULL, NULL, NULL, NULL))2394 return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));2395 }2396 return scnprintf(buf, PAGE_SIZE, "Unknown\n");2397}2398 2399/**2400 * lpfc_max_vpi_show - Return maximum vpi2401 * @dev: class device that is converted into a Scsi_host.2402 * @attr: device attribute, not used.2403 * @buf: on return contains the maximum vpi count in decimal or "Unknown".2404 *2405 * Description:2406 * Calls lpfc_get_hba_info() asking for just the mvpi count.2407 * If lpfc_get_hba_info() returns zero (failure) the buffer text is set2408 * to "Unknown" and the buffer length is returned, therefore the caller2409 * must check for "Unknown" in the buffer to detect a failure.2410 *2411 * Returns: size of formatted string.2412 **/2413static ssize_t2414lpfc_max_vpi_show(struct device *dev, struct device_attribute *attr,2415 char *buf)2416{2417 struct Scsi_Host *shost = class_to_shost(dev);2418 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;2419 struct lpfc_hba *phba = vport->phba;2420 uint32_t cnt;2421 2422 if (lpfc_get_hba_info(phba, NULL, NULL, NULL, NULL, &cnt, NULL))2423 return scnprintf(buf, PAGE_SIZE, "%d\n", cnt);2424 return scnprintf(buf, PAGE_SIZE, "Unknown\n");2425}2426 2427/**2428 * lpfc_used_vpi_show - Return maximum vpi minus the available vpi2429 * @dev: class device that is converted into a Scsi_host.2430 * @attr: device attribute, not used.2431 * @buf: on return contains the used vpi count in decimal or "Unknown".2432 *2433 * Description:2434 * Calls lpfc_get_hba_info() asking for just the mvpi and avpi counts.2435 * If lpfc_get_hba_info() returns zero (failure) the buffer text is set2436 * to "Unknown" and the buffer length is returned, therefore the caller2437 * must check for "Unknown" in the buffer to detect a failure.2438 *2439 * Returns: size of formatted string.2440 **/2441static ssize_t2442lpfc_used_vpi_show(struct device *dev, struct device_attribute *attr,2443 char *buf)2444{2445 struct Scsi_Host *shost = class_to_shost(dev);2446 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;2447 struct lpfc_hba *phba = vport->phba;2448 struct lpfc_sli4_hba *sli4_hba;2449 struct lpfc_max_cfg_param *max_cfg_param;2450 u32 cnt = 0, acnt = 0;2451 2452 if (phba->sli_rev == LPFC_SLI_REV4) {2453 sli4_hba = &phba->sli4_hba;2454 max_cfg_param = &sli4_hba->max_cfg_param;2455 return scnprintf(buf, PAGE_SIZE, "%d\n",2456 max_cfg_param->vpi_used);2457 } else {2458 if (lpfc_get_hba_info(phba, NULL, NULL, NULL, NULL, &cnt, &acnt))2459 return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));2460 }2461 return scnprintf(buf, PAGE_SIZE, "Unknown\n");2462}2463 2464/**2465 * lpfc_npiv_info_show - Return text about NPIV support for the adapter2466 * @dev: class device that is converted into a Scsi_host.2467 * @attr: device attribute, not used.2468 * @buf: text that must be interpreted to determine if npiv is supported.2469 *2470 * Description:2471 * Buffer will contain text indicating npiv is not suppoerted on the port,2472 * the port is an NPIV physical port, or it is an npiv virtual port with2473 * the id of the vport.2474 *2475 * Returns: size of formatted string.2476 **/2477static ssize_t2478lpfc_npiv_info_show(struct device *dev, struct device_attribute *attr,2479 char *buf)2480{2481 struct Scsi_Host *shost = class_to_shost(dev);2482 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;2483 struct lpfc_hba *phba = vport->phba;2484 2485 if (!(phba->max_vpi))2486 return scnprintf(buf, PAGE_SIZE, "NPIV Not Supported\n");2487 if (vport->port_type == LPFC_PHYSICAL_PORT)2488 return scnprintf(buf, PAGE_SIZE, "NPIV Physical\n");2489 return scnprintf(buf, PAGE_SIZE, "NPIV Virtual (VPI %d)\n", vport->vpi);2490}2491 2492/**2493 * lpfc_poll_show - Return text about poll support for the adapter2494 * @dev: class device that is converted into a Scsi_host.2495 * @attr: device attribute, not used.2496 * @buf: on return contains the cfg_poll in hex.2497 *2498 * Notes:2499 * cfg_poll should be a lpfc_polling_flags type.2500 *2501 * Returns: size of formatted string.2502 **/2503static ssize_t2504lpfc_poll_show(struct device *dev, struct device_attribute *attr,2505 char *buf)2506{2507 struct Scsi_Host *shost = class_to_shost(dev);2508 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;2509 struct lpfc_hba *phba = vport->phba;2510 2511 return scnprintf(buf, PAGE_SIZE, "%#x\n", phba->cfg_poll);2512}2513 2514/**2515 * lpfc_poll_store - Set the value of cfg_poll for the adapter2516 * @dev: class device that is converted into a Scsi_host.2517 * @attr: device attribute, not used.2518 * @buf: one or more lpfc_polling_flags values.2519 * @count: not used.2520 *2521 * Notes:2522 * buf contents converted to integer and checked for a valid value.2523 *2524 * Returns:2525 * -EINVAL if the buffer connot be converted or is out of range2526 * length of the buf on success2527 **/2528static ssize_t2529lpfc_poll_store(struct device *dev, struct device_attribute *attr,2530 const char *buf, size_t count)2531{2532 struct Scsi_Host *shost = class_to_shost(dev);2533 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;2534 struct lpfc_hba *phba = vport->phba;2535 uint32_t creg_val;2536 uint32_t old_val;2537 int val=0;2538 2539 if (!isdigit(buf[0]))2540 return -EINVAL;2541 2542 if (sscanf(buf, "%i", &val) != 1)2543 return -EINVAL;2544 2545 if ((val & 0x3) != val)2546 return -EINVAL;2547 2548 if (phba->sli_rev == LPFC_SLI_REV4)2549 val = 0;2550 2551 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,2552 "3051 lpfc_poll changed from %d to %d\n",2553 phba->cfg_poll, val);2554 2555 spin_lock_irq(&phba->hbalock);2556 2557 old_val = phba->cfg_poll;2558 2559 if (val & ENABLE_FCP_RING_POLLING) {2560 if ((val & DISABLE_FCP_RING_INT) &&2561 !(old_val & DISABLE_FCP_RING_INT)) {2562 if (lpfc_readl(phba->HCregaddr, &creg_val)) {2563 spin_unlock_irq(&phba->hbalock);2564 return -EINVAL;2565 }2566 creg_val &= ~(HC_R0INT_ENA << LPFC_FCP_RING);2567 writel(creg_val, phba->HCregaddr);2568 readl(phba->HCregaddr); /* flush */2569 2570 lpfc_poll_start_timer(phba);2571 }2572 } else if (val != 0x0) {2573 spin_unlock_irq(&phba->hbalock);2574 return -EINVAL;2575 }2576 2577 if (!(val & DISABLE_FCP_RING_INT) &&2578 (old_val & DISABLE_FCP_RING_INT))2579 {2580 spin_unlock_irq(&phba->hbalock);2581 del_timer(&phba->fcp_poll_timer);2582 spin_lock_irq(&phba->hbalock);2583 if (lpfc_readl(phba->HCregaddr, &creg_val)) {2584 spin_unlock_irq(&phba->hbalock);2585 return -EINVAL;2586 }2587 creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);2588 writel(creg_val, phba->HCregaddr);2589 readl(phba->HCregaddr); /* flush */2590 }2591 2592 phba->cfg_poll = val;2593 2594 spin_unlock_irq(&phba->hbalock);2595 2596 return strlen(buf);2597}2598 2599/**2600 * lpfc_sriov_hw_max_virtfn_show - Return maximum number of virtual functions2601 * @dev: class converted to a Scsi_host structure.2602 * @attr: device attribute, not used.2603 * @buf: on return contains the formatted support level.2604 *2605 * Description:2606 * Returns the maximum number of virtual functions a physical function can2607 * support, 0 will be returned if called on virtual function.2608 *2609 * Returns: size of formatted string.2610 **/2611static ssize_t2612lpfc_sriov_hw_max_virtfn_show(struct device *dev,2613 struct device_attribute *attr,2614 char *buf)2615{2616 struct Scsi_Host *shost = class_to_shost(dev);2617 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;2618 struct lpfc_hba *phba = vport->phba;2619 uint16_t max_nr_virtfn;2620 2621 max_nr_virtfn = lpfc_sli_sriov_nr_virtfn_get(phba);2622 return scnprintf(buf, PAGE_SIZE, "%d\n", max_nr_virtfn);2623}2624 2625/**2626 * lpfc_enable_bbcr_set: Sets an attribute value.2627 * @phba: pointer to the adapter structure.2628 * @val: integer attribute value.2629 *2630 * Description:2631 * Validates the min and max values then sets the2632 * adapter config field if in the valid range. prints error message2633 * and does not set the parameter if invalid.2634 *2635 * Returns:2636 * zero on success2637 * -EINVAL if val is invalid2638 */2639static ssize_t2640lpfc_enable_bbcr_set(struct lpfc_hba *phba, uint val)2641{2642 if (lpfc_rangecheck(val, 0, 1) && phba->sli_rev == LPFC_SLI_REV4) {2643 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,2644 "3068 lpfc_enable_bbcr changed from %d to "2645 "%d\n", phba->cfg_enable_bbcr, val);2646 phba->cfg_enable_bbcr = val;2647 return 0;2648 }2649 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,2650 "0451 lpfc_enable_bbcr cannot set to %d, range is 0, "2651 "1\n", val);2652 return -EINVAL;2653}2654 2655/*2656 * lpfc_param_show - Return a cfg attribute value in decimal2657 *2658 * Description:2659 * Macro that given an attr e.g. hba_queue_depth expands2660 * into a function with the name lpfc_hba_queue_depth_show.2661 *2662 * lpfc_##attr##_show: Return the decimal value of an adapters cfg_xxx field.2663 * @dev: class device that is converted into a Scsi_host.2664 * @attr: device attribute, not used.2665 * @buf: on return contains the attribute value in decimal.2666 *2667 * Returns: size of formatted string.2668 **/2669#define lpfc_param_show(attr) \2670static ssize_t \2671lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \2672 char *buf) \2673{ \2674 struct Scsi_Host *shost = class_to_shost(dev);\2675 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\2676 struct lpfc_hba *phba = vport->phba;\2677 return scnprintf(buf, PAGE_SIZE, "%d\n",\2678 phba->cfg_##attr);\2679}2680 2681/*2682 * lpfc_param_hex_show - Return a cfg attribute value in hex2683 *2684 * Description:2685 * Macro that given an attr e.g. hba_queue_depth expands2686 * into a function with the name lpfc_hba_queue_depth_show2687 *2688 * lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field.2689 * @dev: class device that is converted into a Scsi_host.2690 * @attr: device attribute, not used.2691 * @buf: on return contains the attribute value in hexadecimal.2692 *2693 * Returns: size of formatted string.2694 **/2695#define lpfc_param_hex_show(attr) \2696static ssize_t \2697lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \2698 char *buf) \2699{ \2700 struct Scsi_Host *shost = class_to_shost(dev);\2701 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\2702 struct lpfc_hba *phba = vport->phba;\2703 uint val = 0;\2704 val = phba->cfg_##attr;\2705 return scnprintf(buf, PAGE_SIZE, "%#x\n",\2706 phba->cfg_##attr);\2707}2708 2709/*2710 * lpfc_param_init - Initializes a cfg attribute2711 *2712 * Description:2713 * Macro that given an attr e.g. hba_queue_depth expands2714 * into a function with the name lpfc_hba_queue_depth_init. The macro also2715 * takes a default argument, a minimum and maximum argument.2716 *2717 * lpfc_##attr##_init: Initializes an attribute.2718 * @phba: pointer to the adapter structure.2719 * @val: integer attribute value.2720 *2721 * Validates the min and max values then sets the adapter config field2722 * accordingly, or uses the default if out of range and prints an error message.2723 *2724 * Returns:2725 * zero on success2726 * -EINVAL if default used2727 **/2728#define lpfc_param_init(attr, default, minval, maxval) \2729static int \2730lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \2731{ \2732 if (lpfc_rangecheck(val, minval, maxval)) {\2733 phba->cfg_##attr = val;\2734 return 0;\2735 }\2736 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \2737 "0449 lpfc_"#attr" attribute cannot be set to %d, "\2738 "allowed range is ["#minval", "#maxval"]\n", val); \2739 phba->cfg_##attr = default;\2740 return -EINVAL;\2741}2742 2743/*2744 * lpfc_param_set - Set a cfg attribute value2745 *2746 * Description:2747 * Macro that given an attr e.g. hba_queue_depth expands2748 * into a function with the name lpfc_hba_queue_depth_set2749 *2750 * lpfc_##attr##_set: Sets an attribute value.2751 * @phba: pointer to the adapter structure.2752 * @val: integer attribute value.2753 *2754 * Description:2755 * Validates the min and max values then sets the2756 * adapter config field if in the valid range. prints error message2757 * and does not set the parameter if invalid.2758 *2759 * Returns:2760 * zero on success2761 * -EINVAL if val is invalid2762 **/2763#define lpfc_param_set(attr, default, minval, maxval) \2764static int \2765lpfc_##attr##_set(struct lpfc_hba *phba, uint val) \2766{ \2767 if (lpfc_rangecheck(val, minval, maxval)) {\2768 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \2769 "3052 lpfc_" #attr " changed from %d to %d\n", \2770 phba->cfg_##attr, val); \2771 phba->cfg_##attr = val;\2772 return 0;\2773 }\2774 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \2775 "0450 lpfc_"#attr" attribute cannot be set to %d, "\2776 "allowed range is ["#minval", "#maxval"]\n", val); \2777 return -EINVAL;\2778}2779 2780/*2781 * lpfc_param_store - Set a vport attribute value2782 *2783 * Description:2784 * Macro that given an attr e.g. hba_queue_depth expands2785 * into a function with the name lpfc_hba_queue_depth_store.2786 *2787 * lpfc_##attr##_store: Set an sttribute value.2788 * @dev: class device that is converted into a Scsi_host.2789 * @attr: device attribute, not used.2790 * @buf: contains the attribute value in ascii.2791 * @count: not used.2792 *2793 * Description:2794 * Convert the ascii text number to an integer, then2795 * use the lpfc_##attr##_set function to set the value.2796 *2797 * Returns:2798 * -EINVAL if val is invalid or lpfc_##attr##_set() fails2799 * length of buffer upon success.2800 **/2801#define lpfc_param_store(attr) \2802static ssize_t \2803lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \2804 const char *buf, size_t count) \2805{ \2806 struct Scsi_Host *shost = class_to_shost(dev);\2807 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\2808 struct lpfc_hba *phba = vport->phba;\2809 uint val = 0;\2810 if (!isdigit(buf[0]))\2811 return -EINVAL;\2812 if (sscanf(buf, "%i", &val) != 1)\2813 return -EINVAL;\2814 if (lpfc_##attr##_set(phba, val) == 0) \2815 return strlen(buf);\2816 else \2817 return -EINVAL;\2818}2819 2820/*2821 * lpfc_vport_param_show - Return decimal formatted cfg attribute value2822 *2823 * Description:2824 * Macro that given an attr e.g. hba_queue_depth expands2825 * into a function with the name lpfc_hba_queue_depth_show2826 *2827 * lpfc_##attr##_show: prints the attribute value in decimal.2828 * @dev: class device that is converted into a Scsi_host.2829 * @attr: device attribute, not used.2830 * @buf: on return contains the attribute value in decimal.2831 *2832 * Returns: length of formatted string.2833 **/2834#define lpfc_vport_param_show(attr) \2835static ssize_t \2836lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \2837 char *buf) \2838{ \2839 struct Scsi_Host *shost = class_to_shost(dev);\2840 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\2841 return scnprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_##attr);\2842}2843 2844/*2845 * lpfc_vport_param_hex_show - Return hex formatted attribute value2846 *2847 * Description:2848 * Macro that given an attr e.g.2849 * hba_queue_depth expands into a function with the name2850 * lpfc_hba_queue_depth_show2851 *2852 * lpfc_##attr##_show: prints the attribute value in hexadecimal.2853 * @dev: class device that is converted into a Scsi_host.2854 * @attr: device attribute, not used.2855 * @buf: on return contains the attribute value in hexadecimal.2856 *2857 * Returns: length of formatted string.2858 **/2859#define lpfc_vport_param_hex_show(attr) \2860static ssize_t \2861lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \2862 char *buf) \2863{ \2864 struct Scsi_Host *shost = class_to_shost(dev);\2865 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\2866 return scnprintf(buf, PAGE_SIZE, "%#x\n", vport->cfg_##attr);\2867}2868 2869/*2870 * lpfc_vport_param_init - Initialize a vport cfg attribute2871 *2872 * Description:2873 * Macro that given an attr e.g. hba_queue_depth expands2874 * into a function with the name lpfc_hba_queue_depth_init. The macro also2875 * takes a default argument, a minimum and maximum argument.2876 *2877 * lpfc_##attr##_init: validates the min and max values then sets the2878 * adapter config field accordingly, or uses the default if out of range2879 * and prints an error message.2880 * @phba: pointer to the adapter structure.2881 * @val: integer attribute value.2882 *2883 * Returns:2884 * zero on success2885 * -EINVAL if default used2886 **/2887#define lpfc_vport_param_init(attr, default, minval, maxval) \2888static int \2889lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \2890{ \2891 if (lpfc_rangecheck(val, minval, maxval)) {\2892 vport->cfg_##attr = val;\2893 return 0;\2894 }\2895 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \2896 "0423 lpfc_"#attr" attribute cannot be set to %d, "\2897 "allowed range is ["#minval", "#maxval"]\n", val); \2898 vport->cfg_##attr = default;\2899 return -EINVAL;\2900}2901 2902/*2903 * lpfc_vport_param_set - Set a vport cfg attribute2904 *2905 * Description:2906 * Macro that given an attr e.g. hba_queue_depth expands2907 * into a function with the name lpfc_hba_queue_depth_set2908 *2909 * lpfc_##attr##_set: validates the min and max values then sets the2910 * adapter config field if in the valid range. prints error message2911 * and does not set the parameter if invalid.2912 * @phba: pointer to the adapter structure.2913 * @val: integer attribute value.2914 *2915 * Returns:2916 * zero on success2917 * -EINVAL if val is invalid2918 **/2919#define lpfc_vport_param_set(attr, default, minval, maxval) \2920static int \2921lpfc_##attr##_set(struct lpfc_vport *vport, uint val) \2922{ \2923 if (lpfc_rangecheck(val, minval, maxval)) {\2924 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \2925 "3053 lpfc_" #attr \2926 " changed from %d (x%x) to %d (x%x)\n", \2927 vport->cfg_##attr, vport->cfg_##attr, \2928 val, val); \2929 vport->cfg_##attr = val;\2930 return 0;\2931 }\2932 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \2933 "0424 lpfc_"#attr" attribute cannot be set to %d, "\2934 "allowed range is ["#minval", "#maxval"]\n", val); \2935 return -EINVAL;\2936}2937 2938/*2939 * lpfc_vport_param_store - Set a vport attribute2940 *2941 * Description:2942 * Macro that given an attr e.g. hba_queue_depth2943 * expands into a function with the name lpfc_hba_queue_depth_store2944 *2945 * lpfc_##attr##_store: convert the ascii text number to an integer, then2946 * use the lpfc_##attr##_set function to set the value.2947 * @cdev: class device that is converted into a Scsi_host.2948 * @buf: contains the attribute value in decimal.2949 * @count: not used.2950 *2951 * Returns:2952 * -EINVAL if val is invalid or lpfc_##attr##_set() fails2953 * length of buffer upon success.2954 **/2955#define lpfc_vport_param_store(attr) \2956static ssize_t \2957lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \2958 const char *buf, size_t count) \2959{ \2960 struct Scsi_Host *shost = class_to_shost(dev);\2961 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\2962 uint val = 0;\2963 if (!isdigit(buf[0]))\2964 return -EINVAL;\2965 if (sscanf(buf, "%i", &val) != 1)\2966 return -EINVAL;\2967 if (lpfc_##attr##_set(vport, val) == 0) \2968 return strlen(buf);\2969 else \2970 return -EINVAL;\2971}2972 2973 2974static DEVICE_ATTR(nvme_info, 0444, lpfc_nvme_info_show, NULL);2975static DEVICE_ATTR(scsi_stat, 0444, lpfc_scsi_stat_show, NULL);2976static DEVICE_ATTR(bg_info, S_IRUGO, lpfc_bg_info_show, NULL);2977static DEVICE_ATTR(bg_guard_err, S_IRUGO, lpfc_bg_guard_err_show, NULL);2978static DEVICE_ATTR(bg_apptag_err, S_IRUGO, lpfc_bg_apptag_err_show, NULL);2979static DEVICE_ATTR(bg_reftag_err, S_IRUGO, lpfc_bg_reftag_err_show, NULL);2980static DEVICE_ATTR(info, S_IRUGO, lpfc_info_show, NULL);2981static DEVICE_ATTR(serialnum, S_IRUGO, lpfc_serialnum_show, NULL);2982static DEVICE_ATTR(modeldesc, S_IRUGO, lpfc_modeldesc_show, NULL);2983static DEVICE_ATTR(modelname, S_IRUGO, lpfc_modelname_show, NULL);2984static DEVICE_ATTR(programtype, S_IRUGO, lpfc_programtype_show, NULL);2985static DEVICE_ATTR(portnum, S_IRUGO, lpfc_vportnum_show, NULL);2986static DEVICE_ATTR(fwrev, S_IRUGO, lpfc_fwrev_show, NULL);2987static DEVICE_ATTR(hdw, S_IRUGO, lpfc_hdw_show, NULL);2988static DEVICE_ATTR(link_state, S_IRUGO | S_IWUSR, lpfc_link_state_show,2989 lpfc_link_state_store);2990static DEVICE_ATTR(option_rom_version, S_IRUGO,2991 lpfc_option_rom_version_show, NULL);2992static DEVICE_ATTR(num_discovered_ports, S_IRUGO,2993 lpfc_num_discovered_ports_show, NULL);2994static DEVICE_ATTR(nport_evt_cnt, S_IRUGO, lpfc_nport_evt_cnt_show, NULL);2995static DEVICE_ATTR_RO(lpfc_drvr_version);2996static DEVICE_ATTR_RO(lpfc_enable_fip);2997static DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR,2998 lpfc_board_mode_show, lpfc_board_mode_store);2999static DEVICE_ATTR_RO(lpfc_xcvr_data);3000static DEVICE_ATTR(issue_reset, S_IWUSR, NULL, lpfc_issue_reset);3001static DEVICE_ATTR(max_vpi, S_IRUGO, lpfc_max_vpi_show, NULL);3002static DEVICE_ATTR(used_vpi, S_IRUGO, lpfc_used_vpi_show, NULL);3003static DEVICE_ATTR(max_rpi, S_IRUGO, lpfc_max_rpi_show, NULL);3004static DEVICE_ATTR(used_rpi, S_IRUGO, lpfc_used_rpi_show, NULL);3005static DEVICE_ATTR(max_xri, S_IRUGO, lpfc_max_xri_show, NULL);3006static DEVICE_ATTR(used_xri, S_IRUGO, lpfc_used_xri_show, NULL);3007static DEVICE_ATTR(npiv_info, S_IRUGO, lpfc_npiv_info_show, NULL);3008static DEVICE_ATTR_RO(lpfc_temp_sensor);3009static DEVICE_ATTR_RO(lpfc_sriov_hw_max_virtfn);3010static DEVICE_ATTR(protocol, S_IRUGO, lpfc_sli4_protocol_show, NULL);3011static DEVICE_ATTR(lpfc_xlane_supported, S_IRUGO, lpfc_oas_supported_show,3012 NULL);3013static DEVICE_ATTR(cmf_info, 0444, lpfc_cmf_info_show, NULL);3014 3015#define WWN_SZ 83016/**3017 * lpfc_wwn_set - Convert string to the 8 byte WWN value.3018 * @buf: WWN string.3019 * @cnt: Length of string.3020 * @wwn: Array to receive converted wwn value.3021 *3022 * Returns:3023 * -EINVAL if the buffer does not contain a valid wwn3024 * 0 success3025 **/3026static size_t3027lpfc_wwn_set(const char *buf, size_t cnt, char wwn[])3028{3029 unsigned int i, j;3030 3031 /* Count may include a LF at end of string */3032 if (buf[cnt-1] == '\n')3033 cnt--;3034 3035 if ((cnt < 16) || (cnt > 18) || ((cnt == 17) && (*buf++ != 'x')) ||3036 ((cnt == 18) && ((*buf++ != '0') || (*buf++ != 'x'))))3037 return -EINVAL;3038 3039 memset(wwn, 0, WWN_SZ);3040 3041 /* Validate and store the new name */3042 for (i = 0, j = 0; i < 16; i++) {3043 if ((*buf >= 'a') && (*buf <= 'f'))3044 j = ((j << 4) | ((*buf++ - 'a') + 10));3045 else if ((*buf >= 'A') && (*buf <= 'F'))3046 j = ((j << 4) | ((*buf++ - 'A') + 10));3047 else if ((*buf >= '0') && (*buf <= '9'))3048 j = ((j << 4) | (*buf++ - '0'));3049 else3050 return -EINVAL;3051 if (i % 2) {3052 wwn[i/2] = j & 0xff;3053 j = 0;3054 }3055 }3056 return 0;3057}3058 3059 3060/**3061 * lpfc_oas_tgt_show - Return wwpn of target whose luns maybe enabled for3062 * Optimized Access Storage (OAS) operations.3063 * @dev: class device that is converted into a Scsi_host.3064 * @attr: device attribute, not used.3065 * @buf: buffer for passing information.3066 *3067 * Returns:3068 * value of count3069 **/3070static ssize_t3071lpfc_oas_tgt_show(struct device *dev, struct device_attribute *attr,3072 char *buf)3073{3074 struct Scsi_Host *shost = class_to_shost(dev);3075 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;3076 3077 return scnprintf(buf, PAGE_SIZE, "0x%llx\n",3078 wwn_to_u64(phba->cfg_oas_tgt_wwpn));3079}3080 3081/**3082 * lpfc_oas_tgt_store - Store wwpn of target whose luns maybe enabled for3083 * Optimized Access Storage (OAS) operations.3084 * @dev: class device that is converted into a Scsi_host.3085 * @attr: device attribute, not used.3086 * @buf: buffer for passing information.3087 * @count: Size of the data buffer.3088 *3089 * Returns:3090 * -EINVAL count is invalid, invalid wwpn byte invalid3091 * -EPERM oas is not supported by hba3092 * value of count on success3093 **/3094static ssize_t3095lpfc_oas_tgt_store(struct device *dev, struct device_attribute *attr,3096 const char *buf, size_t count)3097{3098 struct Scsi_Host *shost = class_to_shost(dev);3099 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;3100 unsigned int cnt = count;3101 uint8_t wwpn[WWN_SZ];3102 int rc;3103 3104 if (!phba->cfg_fof)3105 return -EPERM;3106 3107 /* count may include a LF at end of string */3108 if (buf[cnt-1] == '\n')3109 cnt--;3110 3111 rc = lpfc_wwn_set(buf, cnt, wwpn);3112 if (rc)3113 return rc;3114 3115 memcpy(phba->cfg_oas_tgt_wwpn, wwpn, (8 * sizeof(uint8_t)));3116 memcpy(phba->sli4_hba.oas_next_tgt_wwpn, wwpn, (8 * sizeof(uint8_t)));3117 if (wwn_to_u64(wwpn) == 0)3118 phba->cfg_oas_flags |= OAS_FIND_ANY_TARGET;3119 else3120 phba->cfg_oas_flags &= ~OAS_FIND_ANY_TARGET;3121 phba->cfg_oas_flags &= ~OAS_LUN_VALID;3122 phba->sli4_hba.oas_next_lun = FIND_FIRST_OAS_LUN;3123 return count;3124}3125static DEVICE_ATTR(lpfc_xlane_tgt, S_IRUGO | S_IWUSR,3126 lpfc_oas_tgt_show, lpfc_oas_tgt_store);3127 3128/**3129 * lpfc_oas_priority_show - Return wwpn of target whose luns maybe enabled for3130 * Optimized Access Storage (OAS) operations.3131 * @dev: class device that is converted into a Scsi_host.3132 * @attr: device attribute, not used.3133 * @buf: buffer for passing information.3134 *3135 * Returns:3136 * value of count3137 **/3138static ssize_t3139lpfc_oas_priority_show(struct device *dev, struct device_attribute *attr,3140 char *buf)3141{3142 struct Scsi_Host *shost = class_to_shost(dev);3143 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;3144 3145 return scnprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_priority);3146}3147 3148/**3149 * lpfc_oas_priority_store - Store wwpn of target whose luns maybe enabled for3150 * Optimized Access Storage (OAS) operations.3151 * @dev: class device that is converted into a Scsi_host.3152 * @attr: device attribute, not used.3153 * @buf: buffer for passing information.3154 * @count: Size of the data buffer.3155 *3156 * Returns:3157 * -EINVAL count is invalid, invalid wwpn byte invalid3158 * -EPERM oas is not supported by hba3159 * value of count on success3160 **/3161static ssize_t3162lpfc_oas_priority_store(struct device *dev, struct device_attribute *attr,3163 const char *buf, size_t count)3164{3165 struct Scsi_Host *shost = class_to_shost(dev);3166 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;3167 unsigned int cnt = count;3168 unsigned long val;3169 int ret;3170 3171 if (!phba->cfg_fof)3172 return -EPERM;3173 3174 /* count may include a LF at end of string */3175 if (buf[cnt-1] == '\n')3176 cnt--;3177 3178 ret = kstrtoul(buf, 0, &val);3179 if (ret || (val > 0x7f))3180 return -EINVAL;3181 3182 if (val)3183 phba->cfg_oas_priority = (uint8_t)val;3184 else3185 phba->cfg_oas_priority = phba->cfg_XLanePriority;3186 return count;3187}3188static DEVICE_ATTR(lpfc_xlane_priority, S_IRUGO | S_IWUSR,3189 lpfc_oas_priority_show, lpfc_oas_priority_store);3190 3191/**3192 * lpfc_oas_vpt_show - Return wwpn of vport whose targets maybe enabled3193 * for Optimized Access Storage (OAS) operations.3194 * @dev: class device that is converted into a Scsi_host.3195 * @attr: device attribute, not used.3196 * @buf: buffer for passing information.3197 *3198 * Returns:3199 * value of count on success3200 **/3201static ssize_t3202lpfc_oas_vpt_show(struct device *dev, struct device_attribute *attr,3203 char *buf)3204{3205 struct Scsi_Host *shost = class_to_shost(dev);3206 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;3207 3208 return scnprintf(buf, PAGE_SIZE, "0x%llx\n",3209 wwn_to_u64(phba->cfg_oas_vpt_wwpn));3210}3211 3212/**3213 * lpfc_oas_vpt_store - Store wwpn of vport whose targets maybe enabled3214 * for Optimized Access Storage (OAS) operations.3215 * @dev: class device that is converted into a Scsi_host.3216 * @attr: device attribute, not used.3217 * @buf: buffer for passing information.3218 * @count: Size of the data buffer.3219 *3220 * Returns:3221 * -EINVAL count is invalid, invalid wwpn byte invalid3222 * -EPERM oas is not supported by hba3223 * value of count on success3224 **/3225static ssize_t3226lpfc_oas_vpt_store(struct device *dev, struct device_attribute *attr,3227 const char *buf, size_t count)3228{3229 struct Scsi_Host *shost = class_to_shost(dev);3230 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;3231 unsigned int cnt = count;3232 uint8_t wwpn[WWN_SZ];3233 int rc;3234 3235 if (!phba->cfg_fof)3236 return -EPERM;3237 3238 /* count may include a LF at end of string */3239 if (buf[cnt-1] == '\n')3240 cnt--;3241 3242 rc = lpfc_wwn_set(buf, cnt, wwpn);3243 if (rc)3244 return rc;3245 3246 memcpy(phba->cfg_oas_vpt_wwpn, wwpn, (8 * sizeof(uint8_t)));3247 memcpy(phba->sli4_hba.oas_next_vpt_wwpn, wwpn, (8 * sizeof(uint8_t)));3248 if (wwn_to_u64(wwpn) == 0)3249 phba->cfg_oas_flags |= OAS_FIND_ANY_VPORT;3250 else3251 phba->cfg_oas_flags &= ~OAS_FIND_ANY_VPORT;3252 phba->cfg_oas_flags &= ~OAS_LUN_VALID;3253 if (phba->cfg_oas_priority == 0)3254 phba->cfg_oas_priority = phba->cfg_XLanePriority;3255 phba->sli4_hba.oas_next_lun = FIND_FIRST_OAS_LUN;3256 return count;3257}3258static DEVICE_ATTR(lpfc_xlane_vpt, S_IRUGO | S_IWUSR,3259 lpfc_oas_vpt_show, lpfc_oas_vpt_store);3260 3261/**3262 * lpfc_oas_lun_state_show - Return the current state (enabled or disabled)3263 * of whether luns will be enabled or disabled3264 * for Optimized Access Storage (OAS) operations.3265 * @dev: class device that is converted into a Scsi_host.3266 * @attr: device attribute, not used.3267 * @buf: buffer for passing information.3268 *3269 * Returns:3270 * size of formatted string.3271 **/3272static ssize_t3273lpfc_oas_lun_state_show(struct device *dev, struct device_attribute *attr,3274 char *buf)3275{3276 struct Scsi_Host *shost = class_to_shost(dev);3277 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;3278 3279 return scnprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_lun_state);3280}3281 3282/**3283 * lpfc_oas_lun_state_store - Store the state (enabled or disabled)3284 * of whether luns will be enabled or disabled3285 * for Optimized Access Storage (OAS) operations.3286 * @dev: class device that is converted into a Scsi_host.3287 * @attr: device attribute, not used.3288 * @buf: buffer for passing information.3289 * @count: Size of the data buffer.3290 *3291 * Returns:3292 * -EINVAL count is invalid, invalid wwpn byte invalid3293 * -EPERM oas is not supported by hba3294 * value of count on success3295 **/3296static ssize_t3297lpfc_oas_lun_state_store(struct device *dev, struct device_attribute *attr,3298 const char *buf, size_t count)3299{3300 struct Scsi_Host *shost = class_to_shost(dev);3301 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;3302 int val = 0;3303 3304 if (!phba->cfg_fof)3305 return -EPERM;3306 3307 if (!isdigit(buf[0]))3308 return -EINVAL;3309 3310 if (sscanf(buf, "%i", &val) != 1)3311 return -EINVAL;3312 3313 if ((val != 0) && (val != 1))3314 return -EINVAL;3315 3316 phba->cfg_oas_lun_state = val;3317 return strlen(buf);3318}3319static DEVICE_ATTR(lpfc_xlane_lun_state, S_IRUGO | S_IWUSR,3320 lpfc_oas_lun_state_show, lpfc_oas_lun_state_store);3321 3322/**3323 * lpfc_oas_lun_status_show - Return the status of the Optimized Access3324 * Storage (OAS) lun returned by the3325 * lpfc_oas_lun_show function.3326 * @dev: class device that is converted into a Scsi_host.3327 * @attr: device attribute, not used.3328 * @buf: buffer for passing information.3329 *3330 * Returns:3331 * size of formatted string.3332 **/3333static ssize_t3334lpfc_oas_lun_status_show(struct device *dev, struct device_attribute *attr,3335 char *buf)3336{3337 struct Scsi_Host *shost = class_to_shost(dev);3338 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;3339 3340 if (!(phba->cfg_oas_flags & OAS_LUN_VALID))3341 return -EFAULT;3342 3343 return scnprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_lun_status);3344}3345static DEVICE_ATTR(lpfc_xlane_lun_status, S_IRUGO,3346 lpfc_oas_lun_status_show, NULL);3347 3348 3349/**3350 * lpfc_oas_lun_state_set - enable or disable a lun for Optimized Access Storage3351 * (OAS) operations.3352 * @phba: lpfc_hba pointer.3353 * @vpt_wwpn: wwpn of the vport associated with the returned lun3354 * @tgt_wwpn: wwpn of the target associated with the returned lun3355 * @lun: the fc lun for setting oas state.3356 * @oas_state: the oas state to be set to the lun.3357 * @pri: priority3358 *3359 * Returns:3360 * SUCCESS : 03361 * -EPERM OAS is not enabled or not supported by this port.3362 *3363 */3364static size_t3365lpfc_oas_lun_state_set(struct lpfc_hba *phba, uint8_t vpt_wwpn[],3366 uint8_t tgt_wwpn[], uint64_t lun,3367 uint32_t oas_state, uint8_t pri)3368{3369 3370 int rc = 0;3371 3372 if (!phba->cfg_fof)3373 return -EPERM;3374 3375 if (oas_state) {3376 if (!lpfc_enable_oas_lun(phba, (struct lpfc_name *)vpt_wwpn,3377 (struct lpfc_name *)tgt_wwpn,3378 lun, pri))3379 rc = -ENOMEM;3380 } else {3381 lpfc_disable_oas_lun(phba, (struct lpfc_name *)vpt_wwpn,3382 (struct lpfc_name *)tgt_wwpn, lun, pri);3383 }3384 return rc;3385 3386}3387 3388/**3389 * lpfc_oas_lun_get_next - get the next lun that has been enabled for Optimized3390 * Access Storage (OAS) operations.3391 * @phba: lpfc_hba pointer.3392 * @vpt_wwpn: wwpn of the vport associated with the returned lun3393 * @tgt_wwpn: wwpn of the target associated with the returned lun3394 * @lun_status: status of the lun returned lun3395 * @lun_pri: priority of the lun returned lun3396 *3397 * Returns the first or next lun enabled for OAS operations for the vport/target3398 * specified. If a lun is found, its vport wwpn, target wwpn and status is3399 * returned. If the lun is not found, NOT_OAS_ENABLED_LUN is returned.3400 *3401 * Return:3402 * lun that is OAS enabled for the vport/target3403 * NOT_OAS_ENABLED_LUN when no oas enabled lun found.3404 */3405static uint64_t3406lpfc_oas_lun_get_next(struct lpfc_hba *phba, uint8_t vpt_wwpn[],3407 uint8_t tgt_wwpn[], uint32_t *lun_status,3408 uint32_t *lun_pri)3409{3410 uint64_t found_lun;3411 3412 if (unlikely(!phba) || !vpt_wwpn || !tgt_wwpn)3413 return NOT_OAS_ENABLED_LUN;3414 if (lpfc_find_next_oas_lun(phba, (struct lpfc_name *)3415 phba->sli4_hba.oas_next_vpt_wwpn,3416 (struct lpfc_name *)3417 phba->sli4_hba.oas_next_tgt_wwpn,3418 &phba->sli4_hba.oas_next_lun,3419 (struct lpfc_name *)vpt_wwpn,3420 (struct lpfc_name *)tgt_wwpn,3421 &found_lun, lun_status, lun_pri))3422 return found_lun;3423 else3424 return NOT_OAS_ENABLED_LUN;3425}3426 3427/**3428 * lpfc_oas_lun_state_change - enable/disable a lun for OAS operations3429 * @phba: lpfc_hba pointer.3430 * @vpt_wwpn: vport wwpn by reference.3431 * @tgt_wwpn: target wwpn by reference.3432 * @lun: the fc lun for setting oas state.3433 * @oas_state: the oas state to be set to the oas_lun.3434 * @pri: priority3435 *3436 * This routine enables (OAS_LUN_ENABLE) or disables (OAS_LUN_DISABLE)3437 * a lun for OAS operations.3438 *3439 * Return:3440 * SUCCESS: 03441 * -ENOMEM: failed to enable an lun for OAS operations3442 * -EPERM: OAS is not enabled3443 */3444static ssize_t3445lpfc_oas_lun_state_change(struct lpfc_hba *phba, uint8_t vpt_wwpn[],3446 uint8_t tgt_wwpn[], uint64_t lun,3447 uint32_t oas_state, uint8_t pri)3448{3449 3450 int rc;3451 3452 rc = lpfc_oas_lun_state_set(phba, vpt_wwpn, tgt_wwpn, lun,3453 oas_state, pri);3454 return rc;3455}3456 3457/**3458 * lpfc_oas_lun_show - Return oas enabled luns from a chosen target3459 * @dev: class device that is converted into a Scsi_host.3460 * @attr: device attribute, not used.3461 * @buf: buffer for passing information.3462 *3463 * This routine returns a lun enabled for OAS each time the function3464 * is called.3465 *3466 * Returns:3467 * SUCCESS: size of formatted string.3468 * -EFAULT: target or vport wwpn was not set properly.3469 * -EPERM: oas is not enabled.3470 **/3471static ssize_t3472lpfc_oas_lun_show(struct device *dev, struct device_attribute *attr,3473 char *buf)3474{3475 struct Scsi_Host *shost = class_to_shost(dev);3476 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;3477 3478 uint64_t oas_lun;3479 int len = 0;3480 3481 if (!phba->cfg_fof)3482 return -EPERM;3483 3484 if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0)3485 if (!(phba->cfg_oas_flags & OAS_FIND_ANY_VPORT))3486 return -EFAULT;3487 3488 if (wwn_to_u64(phba->cfg_oas_tgt_wwpn) == 0)3489 if (!(phba->cfg_oas_flags & OAS_FIND_ANY_TARGET))3490 return -EFAULT;3491 3492 oas_lun = lpfc_oas_lun_get_next(phba, phba->cfg_oas_vpt_wwpn,3493 phba->cfg_oas_tgt_wwpn,3494 &phba->cfg_oas_lun_status,3495 &phba->cfg_oas_priority);3496 if (oas_lun != NOT_OAS_ENABLED_LUN)3497 phba->cfg_oas_flags |= OAS_LUN_VALID;3498 3499 len += scnprintf(buf + len, PAGE_SIZE-len, "0x%llx", oas_lun);3500 3501 return len;3502}3503 3504/**3505 * lpfc_oas_lun_store - Sets the OAS state for lun3506 * @dev: class device that is converted into a Scsi_host.3507 * @attr: device attribute, not used.3508 * @buf: buffer for passing information.3509 * @count: size of the formatting string3510 *3511 * This function sets the OAS state for lun. Before this function is called,3512 * the vport wwpn, target wwpn, and oas state need to be set.3513 *3514 * Returns:3515 * SUCCESS: size of formatted string.3516 * -EFAULT: target or vport wwpn was not set properly.3517 * -EPERM: oas is not enabled.3518 * size of formatted string.3519 **/3520static ssize_t3521lpfc_oas_lun_store(struct device *dev, struct device_attribute *attr,3522 const char *buf, size_t count)3523{3524 struct Scsi_Host *shost = class_to_shost(dev);3525 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;3526 uint64_t scsi_lun;3527 uint32_t pri;3528 ssize_t rc;3529 3530 if (!phba->cfg_fof)3531 return -EPERM;3532 3533 if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0)3534 return -EFAULT;3535 3536 if (wwn_to_u64(phba->cfg_oas_tgt_wwpn) == 0)3537 return -EFAULT;3538 3539 if (!isdigit(buf[0]))3540 return -EINVAL;3541 3542 if (sscanf(buf, "0x%llx", &scsi_lun) != 1)3543 return -EINVAL;3544 3545 pri = phba->cfg_oas_priority;3546 if (pri == 0)3547 pri = phba->cfg_XLanePriority;3548 3549 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,3550 "3372 Try to set vport 0x%llx target 0x%llx lun:0x%llx "3551 "priority 0x%x with oas state %d\n",3552 wwn_to_u64(phba->cfg_oas_vpt_wwpn),3553 wwn_to_u64(phba->cfg_oas_tgt_wwpn), scsi_lun,3554 pri, phba->cfg_oas_lun_state);3555 3556 rc = lpfc_oas_lun_state_change(phba, phba->cfg_oas_vpt_wwpn,3557 phba->cfg_oas_tgt_wwpn, scsi_lun,3558 phba->cfg_oas_lun_state, pri);3559 if (rc)3560 return rc;3561 3562 return count;3563}3564static DEVICE_ATTR(lpfc_xlane_lun, S_IRUGO | S_IWUSR,3565 lpfc_oas_lun_show, lpfc_oas_lun_store);3566 3567int lpfc_enable_nvmet_cnt;3568unsigned long long lpfc_enable_nvmet[LPFC_NVMET_MAX_PORTS] = {3569 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,3570 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};3571module_param_array(lpfc_enable_nvmet, ullong, &lpfc_enable_nvmet_cnt, 0444);3572MODULE_PARM_DESC(lpfc_enable_nvmet, "Enable HBA port(s) WWPN as a NVME Target");3573 3574static int lpfc_poll = 0;3575module_param(lpfc_poll, int, S_IRUGO);3576MODULE_PARM_DESC(lpfc_poll, "FCP ring polling mode control:"3577 " 0 - none,"3578 " 1 - poll with interrupts enabled"3579 " 3 - poll and disable FCP ring interrupts");3580 3581static DEVICE_ATTR_RW(lpfc_poll);3582 3583int lpfc_no_hba_reset_cnt;3584unsigned long lpfc_no_hba_reset[MAX_HBAS_NO_RESET] = {3585 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};3586module_param_array(lpfc_no_hba_reset, ulong, &lpfc_no_hba_reset_cnt, 0444);3587MODULE_PARM_DESC(lpfc_no_hba_reset, "WWPN of HBAs that should not be reset");3588 3589LPFC_ATTR(sli_mode, 3, 3, 3,3590 "SLI mode selector: 3 - select SLI-3");3591 3592LPFC_ATTR_R(enable_npiv, 1, 0, 1,3593 "Enable NPIV functionality");3594 3595LPFC_ATTR_R(fcf_failover_policy, 1, 1, 2,3596 "FCF Fast failover=1 Priority failover=2");3597 3598/*3599 * lpfc_fcp_wait_abts_rsp: Modifies criteria for reporting completion of3600 * aborted IO.3601 * The range is [0,1]. Default value is 03602 * 0, IO completes after ABTS issued (default).3603 * 1, IO completes after receipt of ABTS response or timeout.3604 */3605LPFC_ATTR_R(fcp_wait_abts_rsp, 0, 0, 1, "Wait for FCP ABTS completion");3606 3607/*3608# lpfc_enable_rrq: Track XRI/OXID reuse after IO failures3609# 0x0 = disabled, XRI/OXID use not tracked.3610# 0x1 = XRI/OXID reuse is timed with ratov, RRQ sent.3611# 0x2 = XRI/OXID reuse is timed with ratov, No RRQ sent.3612*/3613LPFC_ATTR_R(enable_rrq, 2, 0, 2,3614 "Enable RRQ functionality");3615 3616/*3617# lpfc_suppress_link_up: Bring link up at initialization3618# 0x0 = bring link up (issue MBX_INIT_LINK)3619# 0x1 = do NOT bring link up at initialization(MBX_INIT_LINK)3620# 0x2 = never bring up link3621# Default value is 0.3622*/3623LPFC_ATTR_R(suppress_link_up, LPFC_INITIALIZE_LINK, LPFC_INITIALIZE_LINK,3624 LPFC_DELAY_INIT_LINK_INDEFINITELY,3625 "Suppress Link Up at initialization");3626 3627static ssize_t3628lpfc_pls_show(struct device *dev, struct device_attribute *attr, char *buf)3629{3630 struct Scsi_Host *shost = class_to_shost(dev);3631 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;3632 3633 return scnprintf(buf, PAGE_SIZE, "%d\n",3634 phba->sli4_hba.pc_sli4_params.pls);3635}3636static DEVICE_ATTR(pls, 0444,3637 lpfc_pls_show, NULL);3638 3639static ssize_t3640lpfc_pt_show(struct device *dev, struct device_attribute *attr, char *buf)3641{3642 struct Scsi_Host *shost = class_to_shost(dev);3643 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;3644 3645 return scnprintf(buf, PAGE_SIZE, "%d\n",3646 test_bit(HBA_PERSISTENT_TOPO,3647 &phba->hba_flag) ? 1 : 0);3648}3649static DEVICE_ATTR(pt, 0444,3650 lpfc_pt_show, NULL);3651 3652/*3653# lpfc_cnt: Number of IOCBs allocated for ELS, CT, and ABTS3654# 1 - (1024)3655# 2 - (2048)3656# 3 - (3072)3657# 4 - (4096)3658# 5 - (5120)3659*/3660static ssize_t3661lpfc_iocb_hw_show(struct device *dev, struct device_attribute *attr, char *buf)3662{3663 struct Scsi_Host *shost = class_to_shost(dev);3664 struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba;3665 3666 return scnprintf(buf, PAGE_SIZE, "%d\n", phba->iocb_max);3667}3668 3669static DEVICE_ATTR(iocb_hw, S_IRUGO,3670 lpfc_iocb_hw_show, NULL);3671static ssize_t3672lpfc_txq_hw_show(struct device *dev, struct device_attribute *attr, char *buf)3673{3674 struct Scsi_Host *shost = class_to_shost(dev);3675 struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba;3676 struct lpfc_sli_ring *pring = lpfc_phba_elsring(phba);3677 3678 return scnprintf(buf, PAGE_SIZE, "%d\n",3679 pring ? pring->txq_max : 0);3680}3681 3682static DEVICE_ATTR(txq_hw, S_IRUGO,3683 lpfc_txq_hw_show, NULL);3684static ssize_t3685lpfc_txcmplq_hw_show(struct device *dev, struct device_attribute *attr,3686 char *buf)3687{3688 struct Scsi_Host *shost = class_to_shost(dev);3689 struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba;3690 struct lpfc_sli_ring *pring = lpfc_phba_elsring(phba);3691 3692 return scnprintf(buf, PAGE_SIZE, "%d\n",3693 pring ? pring->txcmplq_max : 0);3694}3695 3696static DEVICE_ATTR(txcmplq_hw, S_IRUGO,3697 lpfc_txcmplq_hw_show, NULL);3698 3699/*3700# lpfc_nodev_tmo: If set, it will hold all I/O errors on devices that disappear3701# until the timer expires. Value range is [0,255]. Default value is 30.3702*/3703static int lpfc_nodev_tmo = LPFC_DEF_DEVLOSS_TMO;3704static int lpfc_devloss_tmo = LPFC_DEF_DEVLOSS_TMO;3705module_param(lpfc_nodev_tmo, int, 0);3706MODULE_PARM_DESC(lpfc_nodev_tmo,3707 "Seconds driver will hold I/O waiting "3708 "for a device to come back");3709 3710/**3711 * lpfc_nodev_tmo_show - Return the hba dev loss timeout value3712 * @dev: class converted to a Scsi_host structure.3713 * @attr: device attribute, not used.3714 * @buf: on return contains the dev loss timeout in decimal.3715 *3716 * Returns: size of formatted string.3717 **/3718static ssize_t3719lpfc_nodev_tmo_show(struct device *dev, struct device_attribute *attr,3720 char *buf)3721{3722 struct Scsi_Host *shost = class_to_shost(dev);3723 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;3724 3725 return scnprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_devloss_tmo);3726}3727 3728/**3729 * lpfc_nodev_tmo_init - Set the hba nodev timeout value3730 * @vport: lpfc vport structure pointer.3731 * @val: contains the nodev timeout value.3732 *3733 * Description:3734 * If the devloss tmo is already set then nodev tmo is set to devloss tmo,3735 * a kernel error message is printed and zero is returned.3736 * Else if val is in range then nodev tmo and devloss tmo are set to val.3737 * Otherwise nodev tmo is set to the default value.3738 *3739 * Returns:3740 * zero if already set or if val is in range3741 * -EINVAL val out of range3742 **/3743static int3744lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val)3745{3746 if (vport->cfg_devloss_tmo != LPFC_DEF_DEVLOSS_TMO) {3747 vport->cfg_nodev_tmo = vport->cfg_devloss_tmo;3748 if (val != LPFC_DEF_DEVLOSS_TMO)3749 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,3750 "0407 Ignoring lpfc_nodev_tmo module "3751 "parameter because lpfc_devloss_tmo "3752 "is set.\n");3753 return 0;3754 }3755 3756 if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) {3757 vport->cfg_nodev_tmo = val;3758 vport->cfg_devloss_tmo = val;3759 return 0;3760 }3761 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,3762 "0400 lpfc_nodev_tmo attribute cannot be set to"3763 " %d, allowed range is [%d, %d]\n",3764 val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO);3765 vport->cfg_nodev_tmo = LPFC_DEF_DEVLOSS_TMO;3766 return -EINVAL;3767}3768 3769/**3770 * lpfc_update_rport_devloss_tmo - Update dev loss tmo value3771 * @vport: lpfc vport structure pointer.3772 *3773 * Description:3774 * Update all the ndlp's dev loss tmo with the vport devloss tmo value.3775 **/3776static void3777lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport)3778{3779 struct lpfc_nodelist *ndlp;3780 unsigned long iflags;3781#if (IS_ENABLED(CONFIG_NVME_FC))3782 struct lpfc_nvme_rport *rport;3783 struct nvme_fc_remote_port *remoteport = NULL;3784#endif3785 3786 spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags);3787 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {3788 if (ndlp->rport)3789 ndlp->rport->dev_loss_tmo = vport->cfg_devloss_tmo;3790#if (IS_ENABLED(CONFIG_NVME_FC))3791 spin_lock(&ndlp->lock);3792 rport = lpfc_ndlp_get_nrport(ndlp);3793 if (rport)3794 remoteport = rport->remoteport;3795 spin_unlock(&ndlp->lock);3796 if (rport && remoteport)3797 nvme_fc_set_remoteport_devloss(remoteport,3798 vport->cfg_devloss_tmo);3799#endif3800 }3801 spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags);3802}3803 3804/**3805 * lpfc_nodev_tmo_set - Set the vport nodev tmo and devloss tmo values3806 * @vport: lpfc vport structure pointer.3807 * @val: contains the tmo value.3808 *3809 * Description:3810 * If the devloss tmo is already set or the vport dev loss tmo has changed3811 * then a kernel error message is printed and zero is returned.3812 * Else if val is in range then nodev tmo and devloss tmo are set to val.3813 * Otherwise nodev tmo is set to the default value.3814 *3815 * Returns:3816 * zero if already set or if val is in range3817 * -EINVAL val out of range3818 **/3819static int3820lpfc_nodev_tmo_set(struct lpfc_vport *vport, int val)3821{3822 if (vport->dev_loss_tmo_changed ||3823 (lpfc_devloss_tmo != LPFC_DEF_DEVLOSS_TMO)) {3824 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,3825 "0401 Ignoring change to lpfc_nodev_tmo "3826 "because lpfc_devloss_tmo is set.\n");3827 return 0;3828 }3829 if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) {3830 vport->cfg_nodev_tmo = val;3831 vport->cfg_devloss_tmo = val;3832 /*3833 * For compat: set the fc_host dev loss so new rports3834 * will get the value.3835 */3836 fc_host_dev_loss_tmo(lpfc_shost_from_vport(vport)) = val;3837 lpfc_update_rport_devloss_tmo(vport);3838 return 0;3839 }3840 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,3841 "0403 lpfc_nodev_tmo attribute cannot be set to "3842 "%d, allowed range is [%d, %d]\n",3843 val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO);3844 return -EINVAL;3845}3846 3847lpfc_vport_param_store(nodev_tmo)3848 3849static DEVICE_ATTR_RW(lpfc_nodev_tmo);3850 3851/*3852# lpfc_devloss_tmo: If set, it will hold all I/O errors on devices that3853# disappear until the timer expires. Value range is [0,255]. Default3854# value is 30.3855*/3856module_param(lpfc_devloss_tmo, int, S_IRUGO);3857MODULE_PARM_DESC(lpfc_devloss_tmo,3858 "Seconds driver will hold I/O waiting "3859 "for a device to come back");3860lpfc_vport_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO,3861 LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO)3862lpfc_vport_param_show(devloss_tmo)3863 3864/**3865 * lpfc_devloss_tmo_set - Sets vport nodev tmo, devloss tmo values, changed bit3866 * @vport: lpfc vport structure pointer.3867 * @val: contains the tmo value.3868 *3869 * Description:3870 * If val is in a valid range then set the vport nodev tmo,3871 * devloss tmo, also set the vport dev loss tmo changed flag.3872 * Else a kernel error message is printed.3873 *3874 * Returns:3875 * zero if val is in range3876 * -EINVAL val out of range3877 **/3878static int3879lpfc_devloss_tmo_set(struct lpfc_vport *vport, int val)3880{3881 if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) {3882 vport->cfg_nodev_tmo = val;3883 vport->cfg_devloss_tmo = val;3884 vport->dev_loss_tmo_changed = 1;3885 fc_host_dev_loss_tmo(lpfc_shost_from_vport(vport)) = val;3886 lpfc_update_rport_devloss_tmo(vport);3887 return 0;3888 }3889 3890 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,3891 "0404 lpfc_devloss_tmo attribute cannot be set to "3892 "%d, allowed range is [%d, %d]\n",3893 val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO);3894 return -EINVAL;3895}3896 3897lpfc_vport_param_store(devloss_tmo)3898static DEVICE_ATTR_RW(lpfc_devloss_tmo);3899 3900/*3901 * lpfc_suppress_rsp: Enable suppress rsp feature is firmware supports it3902 * lpfc_suppress_rsp = 0 Disable3903 * lpfc_suppress_rsp = 1 Enable (default)3904 *3905 */3906LPFC_ATTR_R(suppress_rsp, 1, 0, 1,3907 "Enable suppress rsp feature is firmware supports it");3908 3909/*3910 * lpfc_nvmet_mrq: Specify number of RQ pairs for processing NVMET cmds3911 * lpfc_nvmet_mrq = 0 driver will calcualte optimal number of RQ pairs3912 * lpfc_nvmet_mrq = 1 use a single RQ pair3913 * lpfc_nvmet_mrq >= 2 use specified RQ pairs for MRQ3914 *3915 */3916LPFC_ATTR_R(nvmet_mrq,3917 LPFC_NVMET_MRQ_AUTO, LPFC_NVMET_MRQ_AUTO, LPFC_NVMET_MRQ_MAX,3918 "Specify number of RQ pairs for processing NVMET cmds");3919 3920/*3921 * lpfc_nvmet_mrq_post: Specify number of RQ buffer to initially post3922 * to each NVMET RQ. Range 64 to 2048, default is 512.3923 */3924LPFC_ATTR_R(nvmet_mrq_post,3925 LPFC_NVMET_RQE_DEF_POST, LPFC_NVMET_RQE_MIN_POST,3926 LPFC_NVMET_RQE_DEF_COUNT,3927 "Specify number of RQ buffers to initially post");3928 3929/*3930 * lpfc_enable_fc4_type: Defines what FC4 types are supported.3931 * Supported Values: 1 - register just FCP3932 * 3 - register both FCP and NVME3933 * Supported values are [1,3]. Default value is 33934 */3935LPFC_ATTR_R(enable_fc4_type, LPFC_DEF_ENBL_FC4_TYPE,3936 LPFC_ENABLE_FCP, LPFC_MAX_ENBL_FC4_TYPE,3937 "Enable FC4 Protocol support - FCP / NVME");3938 3939/*3940# lpfc_log_verbose: Only turn this flag on if you are willing to risk being3941# deluged with LOTS of information.3942# You can set a bit mask to record specific types of verbose messages:3943# See lpfc_logmsh.h for definitions.3944*/3945LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffffffff,3946 "Verbose logging bit-mask");3947 3948/*3949# lpfc_enable_da_id: This turns on the DA_ID CT command that deregisters3950# objects that have been registered with the nameserver after login.3951*/3952LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1,3953 "Deregister nameserver objects before LOGO");3954 3955/*3956# lun_queue_depth: This parameter is used to limit the number of outstanding3957# commands per FCP LUN.3958*/3959LPFC_VPORT_ATTR_R(lun_queue_depth, 64, 1, 512,3960 "Max number of FCP commands we can queue to a specific LUN");3961 3962/*3963# tgt_queue_depth: This parameter is used to limit the number of outstanding3964# commands per target port. Value range is [10,65535]. Default value is 65535.3965*/3966static uint lpfc_tgt_queue_depth = LPFC_MAX_TGT_QDEPTH;3967module_param(lpfc_tgt_queue_depth, uint, 0444);3968MODULE_PARM_DESC(lpfc_tgt_queue_depth, "Set max Target queue depth");3969lpfc_vport_param_show(tgt_queue_depth);3970lpfc_vport_param_init(tgt_queue_depth, LPFC_MAX_TGT_QDEPTH,3971 LPFC_MIN_TGT_QDEPTH, LPFC_MAX_TGT_QDEPTH);3972 3973/**3974 * lpfc_tgt_queue_depth_set: Sets an attribute value.3975 * @vport: lpfc vport structure pointer.3976 * @val: integer attribute value.3977 *3978 * Description: Sets the parameter to the new value.3979 *3980 * Returns:3981 * zero on success3982 * -EINVAL if val is invalid3983 */3984static int3985lpfc_tgt_queue_depth_set(struct lpfc_vport *vport, uint val)3986{3987 struct lpfc_nodelist *ndlp;3988 unsigned long iflags;3989 3990 if (!lpfc_rangecheck(val, LPFC_MIN_TGT_QDEPTH, LPFC_MAX_TGT_QDEPTH))3991 return -EINVAL;3992 3993 if (val == vport->cfg_tgt_queue_depth)3994 return 0;3995 3996 vport->cfg_tgt_queue_depth = val;3997 3998 /* Next loop thru nodelist and change cmd_qdepth */3999 spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags);4000 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp)4001 ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth;4002 spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags);4003 return 0;4004}4005 4006lpfc_vport_param_store(tgt_queue_depth);4007static DEVICE_ATTR_RW(lpfc_tgt_queue_depth);4008 4009/*4010# hba_queue_depth: This parameter is used to limit the number of outstanding4011# commands per lpfc HBA. Value range is [32,8192]. If this parameter4012# value is greater than the maximum number of exchanges supported by the HBA,4013# then maximum number of exchanges supported by the HBA is used to determine4014# the hba_queue_depth.4015*/4016LPFC_ATTR_R(hba_queue_depth, 8192, 32, 8192,4017 "Max number of FCP commands we can queue to a lpfc HBA");4018 4019/*4020# peer_port_login: This parameter allows/prevents logins4021# between peer ports hosted on the same physical port.4022# When this parameter is set 0 peer ports of same physical port4023# are not allowed to login to each other.4024# When this parameter is set 1 peer ports of same physical port4025# are allowed to login to each other.4026# Default value of this parameter is 0.4027*/4028LPFC_VPORT_ATTR_R(peer_port_login, 0, 0, 1,4029 "Allow peer ports on the same physical port to login to each "4030 "other.");4031 4032/*4033# restrict_login: This parameter allows/prevents logins4034# between Virtual Ports and remote initiators.4035# When this parameter is not set (0) Virtual Ports will accept PLOGIs from4036# other initiators and will attempt to PLOGI all remote ports.4037# When this parameter is set (1) Virtual Ports will reject PLOGIs from4038# remote ports and will not attempt to PLOGI to other initiators.4039# This parameter does not restrict to the physical port.4040# This parameter does not restrict logins to Fabric resident remote ports.4041# Default value of this parameter is 1.4042*/4043static int lpfc_restrict_login = 1;4044module_param(lpfc_restrict_login, int, S_IRUGO);4045MODULE_PARM_DESC(lpfc_restrict_login,4046 "Restrict virtual ports login to remote initiators.");4047lpfc_vport_param_show(restrict_login);4048 4049/**4050 * lpfc_restrict_login_init - Set the vport restrict login flag4051 * @vport: lpfc vport structure pointer.4052 * @val: contains the restrict login value.4053 *4054 * Description:4055 * If val is not in a valid range then log a kernel error message and set4056 * the vport restrict login to one.4057 * If the port type is physical clear the restrict login flag and return.4058 * Else set the restrict login flag to val.4059 *4060 * Returns:4061 * zero if val is in range4062 * -EINVAL val out of range4063 **/4064static int4065lpfc_restrict_login_init(struct lpfc_vport *vport, int val)4066{4067 if (val < 0 || val > 1) {4068 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,4069 "0422 lpfc_restrict_login attribute cannot "4070 "be set to %d, allowed range is [0, 1]\n",4071 val);4072 vport->cfg_restrict_login = 1;4073 return -EINVAL;4074 }4075 if (vport->port_type == LPFC_PHYSICAL_PORT) {4076 vport->cfg_restrict_login = 0;4077 return 0;4078 }4079 vport->cfg_restrict_login = val;4080 return 0;4081}4082 4083/**4084 * lpfc_restrict_login_set - Set the vport restrict login flag4085 * @vport: lpfc vport structure pointer.4086 * @val: contains the restrict login value.4087 *4088 * Description:4089 * If val is not in a valid range then log a kernel error message and set4090 * the vport restrict login to one.4091 * If the port type is physical and the val is not zero log a kernel4092 * error message, clear the restrict login flag and return zero.4093 * Else set the restrict login flag to val.4094 *4095 * Returns:4096 * zero if val is in range4097 * -EINVAL val out of range4098 **/4099static int4100lpfc_restrict_login_set(struct lpfc_vport *vport, int val)4101{4102 if (val < 0 || val > 1) {4103 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,4104 "0425 lpfc_restrict_login attribute cannot "4105 "be set to %d, allowed range is [0, 1]\n",4106 val);4107 vport->cfg_restrict_login = 1;4108 return -EINVAL;4109 }4110 if (vport->port_type == LPFC_PHYSICAL_PORT && val != 0) {4111 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,4112 "0468 lpfc_restrict_login must be 0 for "4113 "Physical ports.\n");4114 vport->cfg_restrict_login = 0;4115 return 0;4116 }4117 vport->cfg_restrict_login = val;4118 return 0;4119}4120lpfc_vport_param_store(restrict_login);4121static DEVICE_ATTR_RW(lpfc_restrict_login);4122 4123/*4124# Some disk devices have a "select ID" or "select Target" capability.4125# From a protocol standpoint "select ID" usually means select the4126# Fibre channel "ALPA". In the FC-AL Profile there is an "informative4127# annex" which contains a table that maps a "select ID" (a number4128# between 0 and 7F) to an ALPA. By default, for compatibility with4129# older drivers, the lpfc driver scans this table from low ALPA to high4130# ALPA.4131#4132# Turning on the scan-down variable (on = 1, off = 0) will4133# cause the lpfc driver to use an inverted table, effectively4134# scanning ALPAs from high to low. Value range is [0,1]. Default value is 1.4135#4136# (Note: This "select ID" functionality is a LOOP ONLY characteristic4137# and will not work across a fabric. Also this parameter will take4138# effect only in the case when ALPA map is not available.)4139*/4140LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1,4141 "Start scanning for devices from highest ALPA to lowest");4142 4143/*4144# lpfc_topology: link topology for init link4145# 0x0 = attempt loop mode then point-to-point4146# 0x01 = internal loopback mode4147# 0x02 = attempt point-to-point mode only4148# 0x04 = attempt loop mode only4149# 0x06 = attempt point-to-point mode then loop4150# Set point-to-point mode if you want to run as an N_Port.4151# Set loop mode if you want to run as an NL_Port. Value range is [0,0x6].4152# Default value is 0.4153*/4154LPFC_ATTR(topology, 0, 0, 6,4155 "Select Fibre Channel topology");4156 4157/**4158 * lpfc_topology_store - Set the adapters topology field4159 * @dev: class device that is converted into a scsi_host.4160 * @attr:device attribute, not used.4161 * @buf: buffer for passing information.4162 * @count: size of the data buffer.4163 *4164 * Description:4165 * If val is in a valid range then set the adapter's topology field and4166 * issue a lip; if the lip fails reset the topology to the old value.4167 *4168 * If the value is not in range log a kernel error message and return an error.4169 *4170 * Returns:4171 * zero if val is in range and lip okay4172 * non-zero return value from lpfc_issue_lip()4173 * -EINVAL val out of range4174 **/4175static ssize_t4176lpfc_topology_store(struct device *dev, struct device_attribute *attr,4177 const char *buf, size_t count)4178{4179 struct Scsi_Host *shost = class_to_shost(dev);4180 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;4181 struct lpfc_hba *phba = vport->phba;4182 int val = 0;4183 int nolip = 0;4184 const char *val_buf = buf;4185 int err;4186 uint32_t prev_val;4187 u8 sli_family, if_type;4188 4189 if (!strncmp(buf, "nolip ", strlen("nolip "))) {4190 nolip = 1;4191 val_buf = &buf[strlen("nolip ")];4192 }4193 4194 if (!isdigit(val_buf[0]))4195 return -EINVAL;4196 if (sscanf(val_buf, "%i", &val) != 1)4197 return -EINVAL;4198 4199 if (val >= 0 && val <= 6) {4200 prev_val = phba->cfg_topology;4201 if (phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G &&4202 val == 4) {4203 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,4204 "3113 Loop mode not supported at speed %d\n",4205 val);4206 return -EINVAL;4207 }4208 /*4209 * The 'topology' is not a configurable parameter if :4210 * - persistent topology enabled4211 * - ASIC_GEN_NUM >= 0xC, with no private loop support4212 */4213 sli_family = bf_get(lpfc_sli_intf_sli_family,4214 &phba->sli4_hba.sli_intf);4215 if_type = bf_get(lpfc_sli_intf_if_type,4216 &phba->sli4_hba.sli_intf);4217 if ((test_bit(HBA_PERSISTENT_TOPO, &phba->hba_flag) ||4218 (!phba->sli4_hba.pc_sli4_params.pls &&4219 (sli_family == LPFC_SLI_INTF_FAMILY_G6 ||4220 if_type == LPFC_SLI_INTF_IF_TYPE_6))) &&4221 val == 4) {4222 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,4223 "3114 Loop mode not supported\n");4224 return -EINVAL;4225 }4226 phba->cfg_topology = val;4227 if (nolip)4228 return strlen(buf);4229 4230 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,4231 "3054 lpfc_topology changed from %d to %d\n",4232 prev_val, val);4233 if (prev_val != val && phba->sli_rev == LPFC_SLI_REV4)4234 phba->fc_topology_changed = 1;4235 err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));4236 if (err) {4237 phba->cfg_topology = prev_val;4238 return -EINVAL;4239 } else4240 return strlen(buf);4241 }4242 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,4243 "%d:0467 lpfc_topology attribute cannot be set to %d, "4244 "allowed range is [0, 6]\n",4245 phba->brd_no, val);4246 return -EINVAL;4247}4248 4249lpfc_param_show(topology)4250static DEVICE_ATTR_RW(lpfc_topology);4251 4252/**4253 * lpfc_static_vport_show: Read callback function for4254 * lpfc_static_vport sysfs file.4255 * @dev: Pointer to class device object.4256 * @attr: device attribute structure.4257 * @buf: Data buffer.4258 *4259 * This function is the read call back function for4260 * lpfc_static_vport sysfs file. The lpfc_static_vport4261 * sysfs file report the mageability of the vport.4262 **/4263static ssize_t4264lpfc_static_vport_show(struct device *dev, struct device_attribute *attr,4265 char *buf)4266{4267 struct Scsi_Host *shost = class_to_shost(dev);4268 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;4269 if (vport->vport_flag & STATIC_VPORT)4270 sprintf(buf, "1\n");4271 else4272 sprintf(buf, "0\n");4273 4274 return strlen(buf);4275}4276 4277/*4278 * Sysfs attribute to control the statistical data collection.4279 */4280static DEVICE_ATTR_RO(lpfc_static_vport);4281 4282/*4283# lpfc_link_speed: Link speed selection for initializing the Fibre Channel4284# connection.4285# Value range is [0,16]. Default value is 0.4286*/4287/**4288 * lpfc_link_speed_store - Set the adapters link speed4289 * @dev: Pointer to class device.4290 * @attr: Unused.4291 * @buf: Data buffer.4292 * @count: Size of the data buffer.4293 *4294 * Description:4295 * If val is in a valid range then set the adapter's link speed field and4296 * issue a lip; if the lip fails reset the link speed to the old value.4297 *4298 * Notes:4299 * If the value is not in range log a kernel error message and return an error.4300 *4301 * Returns:4302 * zero if val is in range and lip okay.4303 * non-zero return value from lpfc_issue_lip()4304 * -EINVAL val out of range4305 **/4306static ssize_t4307lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,4308 const char *buf, size_t count)4309{4310 struct Scsi_Host *shost = class_to_shost(dev);4311 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;4312 struct lpfc_hba *phba = vport->phba;4313 int val = LPFC_USER_LINK_SPEED_AUTO;4314 int nolip = 0;4315 const char *val_buf = buf;4316 int err;4317 uint32_t prev_val, if_type;4318 4319 if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);4320 if (if_type >= LPFC_SLI_INTF_IF_TYPE_2 &&4321 test_bit(HBA_FORCED_LINK_SPEED, &phba->hba_flag))4322 return -EPERM;4323 4324 if (!strncmp(buf, "nolip ", strlen("nolip "))) {4325 nolip = 1;4326 val_buf = &buf[strlen("nolip ")];4327 }4328 4329 if (!isdigit(val_buf[0]))4330 return -EINVAL;4331 if (sscanf(val_buf, "%i", &val) != 1)4332 return -EINVAL;4333 4334 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,4335 "3055 lpfc_link_speed changed from %d to %d %s\n",4336 phba->cfg_link_speed, val, nolip ? "(nolip)" : "(lip)");4337 4338 if (((val == LPFC_USER_LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||4339 ((val == LPFC_USER_LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||4340 ((val == LPFC_USER_LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||4341 ((val == LPFC_USER_LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) ||4342 ((val == LPFC_USER_LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)) ||4343 ((val == LPFC_USER_LINK_SPEED_16G) && !(phba->lmt & LMT_16Gb)) ||4344 ((val == LPFC_USER_LINK_SPEED_32G) && !(phba->lmt & LMT_32Gb)) ||4345 ((val == LPFC_USER_LINK_SPEED_64G) && !(phba->lmt & LMT_64Gb))) {4346 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,4347 "2879 lpfc_link_speed attribute cannot be set "4348 "to %d. Speed is not supported by this port.\n",4349 val);4350 return -EINVAL;4351 }4352 if (val >= LPFC_USER_LINK_SPEED_16G &&4353 phba->fc_topology == LPFC_TOPOLOGY_LOOP) {4354 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,4355 "3112 lpfc_link_speed attribute cannot be set "4356 "to %d. Speed is not supported in loop mode.\n",4357 val);4358 return -EINVAL;4359 }4360 4361 switch (val) {4362 case LPFC_USER_LINK_SPEED_AUTO:4363 case LPFC_USER_LINK_SPEED_1G:4364 case LPFC_USER_LINK_SPEED_2G:4365 case LPFC_USER_LINK_SPEED_4G:4366 case LPFC_USER_LINK_SPEED_8G:4367 case LPFC_USER_LINK_SPEED_16G:4368 case LPFC_USER_LINK_SPEED_32G:4369 case LPFC_USER_LINK_SPEED_64G:4370 prev_val = phba->cfg_link_speed;4371 phba->cfg_link_speed = val;4372 if (nolip)4373 return strlen(buf);4374 4375 err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));4376 if (err) {4377 phba->cfg_link_speed = prev_val;4378 return -EINVAL;4379 }4380 return strlen(buf);4381 default:4382 break;4383 }4384 4385 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,4386 "0469 lpfc_link_speed attribute cannot be set to %d, "4387 "allowed values are [%s]\n",4388 val, LPFC_LINK_SPEED_STRING);4389 return -EINVAL;4390 4391}4392 4393static int lpfc_link_speed = 0;4394module_param(lpfc_link_speed, int, S_IRUGO);4395MODULE_PARM_DESC(lpfc_link_speed, "Select link speed");4396lpfc_param_show(link_speed)4397 4398/**4399 * lpfc_link_speed_init - Set the adapters link speed4400 * @phba: lpfc_hba pointer.4401 * @val: link speed value.4402 *4403 * Description:4404 * If val is in a valid range then set the adapter's link speed field.4405 *4406 * Notes:4407 * If the value is not in range log a kernel error message, clear the link4408 * speed and return an error.4409 *4410 * Returns:4411 * zero if val saved.4412 * -EINVAL val out of range4413 **/4414static int4415lpfc_link_speed_init(struct lpfc_hba *phba, int val)4416{4417 if (val >= LPFC_USER_LINK_SPEED_16G && phba->cfg_topology == 4) {4418 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,4419 "3111 lpfc_link_speed of %d cannot "4420 "support loop mode, setting topology to default.\n",4421 val);4422 phba->cfg_topology = 0;4423 }4424 4425 switch (val) {4426 case LPFC_USER_LINK_SPEED_AUTO:4427 case LPFC_USER_LINK_SPEED_1G:4428 case LPFC_USER_LINK_SPEED_2G:4429 case LPFC_USER_LINK_SPEED_4G:4430 case LPFC_USER_LINK_SPEED_8G:4431 case LPFC_USER_LINK_SPEED_16G:4432 case LPFC_USER_LINK_SPEED_32G:4433 case LPFC_USER_LINK_SPEED_64G:4434 phba->cfg_link_speed = val;4435 return 0;4436 default:4437 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,4438 "0405 lpfc_link_speed attribute cannot "4439 "be set to %d, allowed values are "4440 "["LPFC_LINK_SPEED_STRING"]\n", val);4441 phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO;4442 return -EINVAL;4443 }4444}4445 4446static DEVICE_ATTR_RW(lpfc_link_speed);4447 4448/*4449# lpfc_aer_support: Support PCIe device Advanced Error Reporting (AER)4450# 1 = aer supported and enabled (default)4451# PCIe error reporting is always enabled by the PCI core, so this always4452# shows 1.4453#4454# N.B. Parts of LPFC_ATTR open-coded since some of the underlying4455# infrastructure (phba->cfg_aer_support) is gone.4456*/4457static uint lpfc_aer_support = 1;4458module_param(lpfc_aer_support, uint, S_IRUGO);4459MODULE_PARM_DESC(lpfc_aer_support, "Enable PCIe device AER support");4460static ssize_t4461lpfc_aer_support_show(struct device *dev, struct device_attribute *attr,4462 char *buf)4463{4464 return scnprintf(buf, PAGE_SIZE, "%d\n", lpfc_aer_support);4465}4466 4467/**4468 * lpfc_aer_support_store - Set the adapter for aer support4469 *4470 * @dev: class device that is converted into a Scsi_host.4471 * @attr: device attribute, not used.4472 * @buf: containing enable or disable aer flag.4473 * @count: unused variable.4474 *4475 * Description:4476 * PCIe error reporting is enabled by the PCI core, so drivers don't need4477 * to do anything. Retain this interface for backwards compatibility,4478 * but do nothing.4479 *4480 * Returns:4481 * length of the buf on success4482 * -EINVAL if val out of range4483 **/4484static ssize_t4485lpfc_aer_support_store(struct device *dev, struct device_attribute *attr,4486 const char *buf, size_t count)4487{4488 int val = 0;4489 4490 if (!isdigit(buf[0]))4491 return -EINVAL;4492 if (sscanf(buf, "%i", &val) != 1)4493 return -EINVAL;4494 4495 dev_info_once(dev, "PCIe error reporting automatically enabled by the PCI core; sysfs write ignored\n");4496 return strlen(buf);4497}4498 4499static DEVICE_ATTR_RW(lpfc_aer_support);4500 4501/**4502 * lpfc_aer_cleanup_state - Clean up aer state to the aer enabled device4503 * @dev: class device that is converted into a Scsi_host.4504 * @attr: device attribute, not used.4505 * @buf: containing flag 1 for aer cleanup state.4506 * @count: unused variable.4507 *4508 * Description:4509 * If the @buf contains 1, invokes the kernel AER helper routine4510 * pci_aer_clear_nonfatal_status() to clean up the uncorrectable4511 * error status register.4512 *4513 * Notes:4514 *4515 * Returns:4516 * -EINVAL if the buf does not contain 14517 * -EPERM if the OS cannot clear AER error status, i.e., when platform4518 * firmware owns the AER Capability4519 **/4520static ssize_t4521lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr,4522 const char *buf, size_t count)4523{4524 struct Scsi_Host *shost = class_to_shost(dev);4525 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;4526 struct lpfc_hba *phba = vport->phba;4527 int val, rc = -1;4528 4529 if (!isdigit(buf[0]))4530 return -EINVAL;4531 if (sscanf(buf, "%i", &val) != 1)4532 return -EINVAL;4533 if (val != 1)4534 return -EINVAL;4535 4536 rc = pci_aer_clear_nonfatal_status(phba->pcidev);4537 4538 if (rc == 0)4539 return strlen(buf);4540 else4541 return -EPERM;4542}4543 4544static DEVICE_ATTR(lpfc_aer_state_cleanup, S_IWUSR, NULL,4545 lpfc_aer_cleanup_state);4546 4547/**4548 * lpfc_sriov_nr_virtfn_store - Enable the adapter for sr-iov virtual functions4549 *4550 * @dev: class device that is converted into a Scsi_host.4551 * @attr: device attribute, not used.4552 * @buf: containing the string the number of vfs to be enabled.4553 * @count: unused variable.4554 *4555 * Description:4556 * When this api is called either through user sysfs, the driver shall4557 * try to enable or disable SR-IOV virtual functions according to the4558 * following:4559 *4560 * If zero virtual function has been enabled to the physical function,4561 * the driver shall invoke the pci enable virtual function api trying4562 * to enable the virtual functions. If the nr_vfn provided is greater4563 * than the maximum supported, the maximum virtual function number will4564 * be used for invoking the api; otherwise, the nr_vfn provided shall4565 * be used for invoking the api. If the api call returned success, the4566 * actual number of virtual functions enabled will be set to the driver4567 * cfg_sriov_nr_virtfn; otherwise, -EINVAL shall be returned and driver4568 * cfg_sriov_nr_virtfn remains zero.4569 *4570 * If none-zero virtual functions have already been enabled to the4571 * physical function, as reflected by the driver's cfg_sriov_nr_virtfn,4572 * -EINVAL will be returned and the driver does nothing;4573 *4574 * If the nr_vfn provided is zero and none-zero virtual functions have4575 * been enabled, as indicated by the driver's cfg_sriov_nr_virtfn, the4576 * disabling virtual function api shall be invoded to disable all the4577 * virtual functions and driver's cfg_sriov_nr_virtfn shall be set to4578 * zero. Otherwise, if zero virtual function has been enabled, do4579 * nothing.4580 *4581 * Returns:4582 * length of the buf on success if val is in range the intended mode4583 * is supported.4584 * -EINVAL if val out of range or intended mode is not supported.4585 **/4586static ssize_t4587lpfc_sriov_nr_virtfn_store(struct device *dev, struct device_attribute *attr,4588 const char *buf, size_t count)4589{4590 struct Scsi_Host *shost = class_to_shost(dev);4591 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;4592 struct lpfc_hba *phba = vport->phba;4593 struct pci_dev *pdev = phba->pcidev;4594 int val = 0, rc = -EINVAL;4595 4596 /* Sanity check on user data */4597 if (!isdigit(buf[0]))4598 return -EINVAL;4599 if (sscanf(buf, "%i", &val) != 1)4600 return -EINVAL;4601 if (val < 0)4602 return -EINVAL;4603 4604 /* Request disabling virtual functions */4605 if (val == 0) {4606 if (phba->cfg_sriov_nr_virtfn > 0) {4607 pci_disable_sriov(pdev);4608 phba->cfg_sriov_nr_virtfn = 0;4609 }4610 return strlen(buf);4611 }4612 4613 /* Request enabling virtual functions */4614 if (phba->cfg_sriov_nr_virtfn > 0) {4615 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,4616 "3018 There are %d virtual functions "4617 "enabled on physical function.\n",4618 phba->cfg_sriov_nr_virtfn);4619 return -EEXIST;4620 }4621 4622 if (val <= LPFC_MAX_VFN_PER_PFN)4623 phba->cfg_sriov_nr_virtfn = val;4624 else {4625 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,4626 "3019 Enabling %d virtual functions is not "4627 "allowed.\n", val);4628 return -EINVAL;4629 }4630 4631 rc = lpfc_sli_probe_sriov_nr_virtfn(phba, phba->cfg_sriov_nr_virtfn);4632 if (rc) {4633 phba->cfg_sriov_nr_virtfn = 0;4634 rc = -EPERM;4635 } else4636 rc = strlen(buf);4637 4638 return rc;4639}4640 4641LPFC_ATTR(sriov_nr_virtfn, LPFC_DEF_VFN_PER_PFN, 0, LPFC_MAX_VFN_PER_PFN,4642 "Enable PCIe device SR-IOV virtual fn");4643 4644lpfc_param_show(sriov_nr_virtfn)4645static DEVICE_ATTR_RW(lpfc_sriov_nr_virtfn);4646 4647/**4648 * lpfc_request_firmware_upgrade_store - Request for Linux generic firmware upgrade4649 *4650 * @dev: class device that is converted into a Scsi_host.4651 * @attr: device attribute, not used.4652 * @buf: containing the string the number of vfs to be enabled.4653 * @count: unused variable.4654 *4655 * Description:4656 *4657 * Returns:4658 * length of the buf on success if val is in range the intended mode4659 * is supported.4660 * -EINVAL if val out of range or intended mode is not supported.4661 **/4662static ssize_t4663lpfc_request_firmware_upgrade_store(struct device *dev,4664 struct device_attribute *attr,4665 const char *buf, size_t count)4666{4667 struct Scsi_Host *shost = class_to_shost(dev);4668 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;4669 struct lpfc_hba *phba = vport->phba;4670 int val = 0, rc;4671 4672 /* Sanity check on user data */4673 if (!isdigit(buf[0]))4674 return -EINVAL;4675 if (sscanf(buf, "%i", &val) != 1)4676 return -EINVAL;4677 if (val != 1)4678 return -EINVAL;4679 4680 rc = lpfc_sli4_request_firmware_update(phba, RUN_FW_UPGRADE);4681 if (rc)4682 rc = -EPERM;4683 else4684 rc = strlen(buf);4685 return rc;4686}4687 4688static int lpfc_req_fw_upgrade;4689module_param(lpfc_req_fw_upgrade, int, S_IRUGO|S_IWUSR);4690MODULE_PARM_DESC(lpfc_req_fw_upgrade, "Enable Linux generic firmware upgrade");4691lpfc_param_show(request_firmware_upgrade)4692 4693/**4694 * lpfc_request_firmware_upgrade_init - Enable initial linux generic fw upgrade4695 * @phba: lpfc_hba pointer.4696 * @val: 0 or 1.4697 *4698 * Description:4699 * Set the initial Linux generic firmware upgrade enable or disable flag.4700 *4701 * Returns:4702 * zero if val saved.4703 * -EINVAL val out of range4704 **/4705static int4706lpfc_request_firmware_upgrade_init(struct lpfc_hba *phba, int val)4707{4708 if (val >= 0 && val <= 1) {4709 phba->cfg_request_firmware_upgrade = val;4710 return 0;4711 }4712 return -EINVAL;4713}4714static DEVICE_ATTR(lpfc_req_fw_upgrade, S_IRUGO | S_IWUSR,4715 lpfc_request_firmware_upgrade_show,4716 lpfc_request_firmware_upgrade_store);4717 4718/**4719 * lpfc_force_rscn_store4720 *4721 * @dev: class device that is converted into a Scsi_host.4722 * @attr: device attribute, not used.4723 * @buf: unused string4724 * @count: unused variable.4725 *4726 * Description:4727 * Force the switch to send a RSCN to all other NPorts in our zone4728 * If we are direct connect pt2pt, build the RSCN command ourself4729 * and send to the other NPort. Not supported for private loop.4730 *4731 * Returns:4732 * 0 - on success4733 * -EIO - if command is not sent4734 **/4735static ssize_t4736lpfc_force_rscn_store(struct device *dev, struct device_attribute *attr,4737 const char *buf, size_t count)4738{4739 struct Scsi_Host *shost = class_to_shost(dev);4740 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;4741 int i;4742 4743 i = lpfc_issue_els_rscn(vport, 0);4744 if (i)4745 return -EIO;4746 return strlen(buf);4747}4748 4749/*4750 * lpfc_force_rscn: Force an RSCN to be sent to all remote NPorts4751 * connected to the HBA.4752 *4753 * Value range is any ascii value4754 */4755static int lpfc_force_rscn;4756module_param(lpfc_force_rscn, int, 0644);4757MODULE_PARM_DESC(lpfc_force_rscn,4758 "Force an RSCN to be sent to all remote NPorts");4759lpfc_param_show(force_rscn)4760 4761/**4762 * lpfc_force_rscn_init - Force an RSCN to be sent to all remote NPorts4763 * @phba: lpfc_hba pointer.4764 * @val: unused value.4765 *4766 * Returns:4767 * zero if val saved.4768 **/4769static int4770lpfc_force_rscn_init(struct lpfc_hba *phba, int val)4771{4772 return 0;4773}4774static DEVICE_ATTR_RW(lpfc_force_rscn);4775 4776/**4777 * lpfc_fcp_imax_store4778 *4779 * @dev: class device that is converted into a Scsi_host.4780 * @attr: device attribute, not used.4781 * @buf: string with the number of fast-path FCP interrupts per second.4782 * @count: unused variable.4783 *4784 * Description:4785 * If val is in a valid range [636,651042], then set the adapter's4786 * maximum number of fast-path FCP interrupts per second.4787 *4788 * Returns:4789 * length of the buf on success if val is in range the intended mode4790 * is supported.4791 * -EINVAL if val out of range or intended mode is not supported.4792 **/4793static ssize_t4794lpfc_fcp_imax_store(struct device *dev, struct device_attribute *attr,4795 const char *buf, size_t count)4796{4797 struct Scsi_Host *shost = class_to_shost(dev);4798 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;4799 struct lpfc_hba *phba = vport->phba;4800 struct lpfc_eq_intr_info *eqi;4801 uint32_t usdelay;4802 int val = 0, i;4803 4804 /* fcp_imax is only valid for SLI4 */4805 if (phba->sli_rev != LPFC_SLI_REV4)4806 return -EINVAL;4807 4808 /* Sanity check on user data */4809 if (!isdigit(buf[0]))4810 return -EINVAL;4811 if (sscanf(buf, "%i", &val) != 1)4812 return -EINVAL;4813 4814 /*4815 * Value range for the HBA is [5000,5000000]4816 * The value for each EQ depends on how many EQs are configured.4817 * Allow value == 04818 */4819 if (val && (val < LPFC_MIN_IMAX || val > LPFC_MAX_IMAX))4820 return -EINVAL;4821 4822 phba->cfg_auto_imax = (val) ? 0 : 1;4823 if (phba->cfg_fcp_imax && !val) {4824 queue_delayed_work(phba->wq, &phba->eq_delay_work,4825 msecs_to_jiffies(LPFC_EQ_DELAY_MSECS));4826 4827 for_each_present_cpu(i) {4828 eqi = per_cpu_ptr(phba->sli4_hba.eq_info, i);4829 eqi->icnt = 0;4830 }4831 }4832 4833 phba->cfg_fcp_imax = (uint32_t)val;4834 4835 if (phba->cfg_fcp_imax)4836 usdelay = LPFC_SEC_TO_USEC / phba->cfg_fcp_imax;4837 else4838 usdelay = 0;4839 4840 for (i = 0; i < phba->cfg_irq_chann; i += LPFC_MAX_EQ_DELAY_EQID_CNT)4841 lpfc_modify_hba_eq_delay(phba, i, LPFC_MAX_EQ_DELAY_EQID_CNT,4842 usdelay);4843 4844 return strlen(buf);4845}4846 4847/*4848# lpfc_fcp_imax: The maximum number of fast-path FCP interrupts per second4849# for the HBA.4850#4851# Value range is [5,000 to 5,000,000]. Default value is 50,000.4852*/4853static int lpfc_fcp_imax = LPFC_DEF_IMAX;4854module_param(lpfc_fcp_imax, int, S_IRUGO|S_IWUSR);4855MODULE_PARM_DESC(lpfc_fcp_imax,4856 "Set the maximum number of FCP interrupts per second per HBA");4857lpfc_param_show(fcp_imax)4858 4859/**4860 * lpfc_fcp_imax_init - Set the initial sr-iov virtual function enable4861 * @phba: lpfc_hba pointer.4862 * @val: link speed value.4863 *4864 * Description:4865 * If val is in a valid range [636,651042], then initialize the adapter's4866 * maximum number of fast-path FCP interrupts per second.4867 *4868 * Returns:4869 * zero if val saved.4870 * -EINVAL val out of range4871 **/4872static int4873lpfc_fcp_imax_init(struct lpfc_hba *phba, int val)4874{4875 if (phba->sli_rev != LPFC_SLI_REV4) {4876 phba->cfg_fcp_imax = 0;4877 return 0;4878 }4879 4880 if ((val >= LPFC_MIN_IMAX && val <= LPFC_MAX_IMAX) ||4881 (val == 0)) {4882 phba->cfg_fcp_imax = val;4883 return 0;4884 }4885 4886 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,4887 "3016 lpfc_fcp_imax: %d out of range, using default\n",4888 val);4889 phba->cfg_fcp_imax = LPFC_DEF_IMAX;4890 4891 return 0;4892}4893 4894static DEVICE_ATTR_RW(lpfc_fcp_imax);4895 4896/**4897 * lpfc_cq_max_proc_limit_store4898 *4899 * @dev: class device that is converted into a Scsi_host.4900 * @attr: device attribute, not used.4901 * @buf: string with the cq max processing limit of cqes4902 * @count: unused variable.4903 *4904 * Description:4905 * If val is in a valid range, then set value on each cq4906 *4907 * Returns:4908 * The length of the buf: if successful4909 * -ERANGE: if val is not in the valid range4910 * -EINVAL: if bad value format or intended mode is not supported.4911 **/4912static ssize_t4913lpfc_cq_max_proc_limit_store(struct device *dev, struct device_attribute *attr,4914 const char *buf, size_t count)4915{4916 struct Scsi_Host *shost = class_to_shost(dev);4917 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;4918 struct lpfc_hba *phba = vport->phba;4919 struct lpfc_queue *eq, *cq;4920 unsigned long val;4921 int i;4922 4923 /* cq_max_proc_limit is only valid for SLI4 */4924 if (phba->sli_rev != LPFC_SLI_REV4)4925 return -EINVAL;4926 4927 /* Sanity check on user data */4928 if (!isdigit(buf[0]))4929 return -EINVAL;4930 if (kstrtoul(buf, 0, &val))4931 return -EINVAL;4932 4933 if (val < LPFC_CQ_MIN_PROC_LIMIT || val > LPFC_CQ_MAX_PROC_LIMIT)4934 return -ERANGE;4935 4936 phba->cfg_cq_max_proc_limit = (uint32_t)val;4937 4938 /* set the values on the cq's */4939 for (i = 0; i < phba->cfg_irq_chann; i++) {4940 /* Get the EQ corresponding to the IRQ vector */4941 eq = phba->sli4_hba.hba_eq_hdl[i].eq;4942 if (!eq)4943 continue;4944 4945 list_for_each_entry(cq, &eq->child_list, list)4946 cq->max_proc_limit = min(phba->cfg_cq_max_proc_limit,4947 cq->entry_count);4948 }4949 4950 return strlen(buf);4951}4952 4953/*4954 * lpfc_cq_max_proc_limit: The maximum number CQE entries processed in an4955 * itteration of CQ processing.4956 */4957static int lpfc_cq_max_proc_limit = LPFC_CQ_DEF_MAX_PROC_LIMIT;4958module_param(lpfc_cq_max_proc_limit, int, 0644);4959MODULE_PARM_DESC(lpfc_cq_max_proc_limit,4960 "Set the maximum number CQEs processed in an iteration of "4961 "CQ processing");4962lpfc_param_show(cq_max_proc_limit)4963 4964/*4965 * lpfc_cq_poll_threshold: Set the threshold of CQE completions in a4966 * single handler call which should request a polled completion rather4967 * than re-enabling interrupts.4968 */4969LPFC_ATTR_RW(cq_poll_threshold, LPFC_CQ_DEF_THRESHOLD_TO_POLL,4970 LPFC_CQ_MIN_THRESHOLD_TO_POLL,4971 LPFC_CQ_MAX_THRESHOLD_TO_POLL,4972 "CQE Processing Threshold to enable Polling");4973 4974/**4975 * lpfc_cq_max_proc_limit_init - Set the initial cq max_proc_limit4976 * @phba: lpfc_hba pointer.4977 * @val: entry limit4978 *4979 * Description:4980 * If val is in a valid range, then initialize the adapter's maximum4981 * value.4982 *4983 * Returns:4984 * Always returns 0 for success, even if value not always set to4985 * requested value. If value out of range or not supported, will fall4986 * back to default.4987 **/4988static int4989lpfc_cq_max_proc_limit_init(struct lpfc_hba *phba, int val)4990{4991 phba->cfg_cq_max_proc_limit = LPFC_CQ_DEF_MAX_PROC_LIMIT;4992 4993 if (phba->sli_rev != LPFC_SLI_REV4)4994 return 0;4995 4996 if (val >= LPFC_CQ_MIN_PROC_LIMIT && val <= LPFC_CQ_MAX_PROC_LIMIT) {4997 phba->cfg_cq_max_proc_limit = val;4998 return 0;4999 }5000 5001 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,5002 "0371 lpfc_cq_max_proc_limit: %d out of range, using "5003 "default\n",5004 phba->cfg_cq_max_proc_limit);5005 5006 return 0;5007}5008 5009static DEVICE_ATTR_RW(lpfc_cq_max_proc_limit);5010 5011/**5012 * lpfc_fcp_cpu_map_show - Display current driver CPU affinity5013 * @dev: class converted to a Scsi_host structure.5014 * @attr: device attribute, not used.5015 * @buf: on return contains text describing the state of the link.5016 *5017 * Returns: size of formatted string.5018 **/5019static ssize_t5020lpfc_fcp_cpu_map_show(struct device *dev, struct device_attribute *attr,5021 char *buf)5022{5023 struct Scsi_Host *shost = class_to_shost(dev);5024 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;5025 struct lpfc_hba *phba = vport->phba;5026 struct lpfc_vector_map_info *cpup;5027 int len = 0;5028 5029 if ((phba->sli_rev != LPFC_SLI_REV4) ||5030 (phba->intr_type != MSIX))5031 return len;5032 5033 switch (phba->cfg_fcp_cpu_map) {5034 case 0:5035 len += scnprintf(buf + len, PAGE_SIZE-len,5036 "fcp_cpu_map: No mapping (%d)\n",5037 phba->cfg_fcp_cpu_map);5038 return len;5039 case 1:5040 len += scnprintf(buf + len, PAGE_SIZE-len,5041 "fcp_cpu_map: HBA centric mapping (%d): "5042 "%d of %d CPUs online from %d possible CPUs\n",5043 phba->cfg_fcp_cpu_map, num_online_cpus(),5044 num_present_cpus(),5045 phba->sli4_hba.num_possible_cpu);5046 break;5047 }5048 5049 while (phba->sli4_hba.curr_disp_cpu <5050 phba->sli4_hba.num_possible_cpu) {5051 cpup = &phba->sli4_hba.cpu_map[phba->sli4_hba.curr_disp_cpu];5052 5053 if (!cpu_present(phba->sli4_hba.curr_disp_cpu))5054 len += scnprintf(buf + len, PAGE_SIZE - len,5055 "CPU %02d not present\n",5056 phba->sli4_hba.curr_disp_cpu);5057 else if (cpup->eq == LPFC_VECTOR_MAP_EMPTY) {5058 if (cpup->hdwq == LPFC_VECTOR_MAP_EMPTY)5059 len += scnprintf(5060 buf + len, PAGE_SIZE - len,5061 "CPU %02d hdwq None "5062 "physid %d coreid %d ht %d ua %d\n",5063 phba->sli4_hba.curr_disp_cpu,5064 cpup->phys_id, cpup->core_id,5065 (cpup->flag & LPFC_CPU_MAP_HYPER),5066 (cpup->flag & LPFC_CPU_MAP_UNASSIGN));5067 else5068 len += scnprintf(5069 buf + len, PAGE_SIZE - len,5070 "CPU %02d EQ None hdwq %04d "5071 "physid %d coreid %d ht %d ua %d\n",5072 phba->sli4_hba.curr_disp_cpu,5073 cpup->hdwq, cpup->phys_id,5074 cpup->core_id,5075 (cpup->flag & LPFC_CPU_MAP_HYPER),5076 (cpup->flag & LPFC_CPU_MAP_UNASSIGN));5077 } else {5078 if (cpup->hdwq == LPFC_VECTOR_MAP_EMPTY)5079 len += scnprintf(5080 buf + len, PAGE_SIZE - len,5081 "CPU %02d hdwq None "5082 "physid %d coreid %d ht %d ua %d IRQ %d\n",5083 phba->sli4_hba.curr_disp_cpu,5084 cpup->phys_id,5085 cpup->core_id,5086 (cpup->flag & LPFC_CPU_MAP_HYPER),5087 (cpup->flag & LPFC_CPU_MAP_UNASSIGN),5088 lpfc_get_irq(cpup->eq));5089 else5090 len += scnprintf(5091 buf + len, PAGE_SIZE - len,5092 "CPU %02d EQ %04d hdwq %04d "5093 "physid %d coreid %d ht %d ua %d IRQ %d\n",5094 phba->sli4_hba.curr_disp_cpu,5095 cpup->eq, cpup->hdwq, cpup->phys_id,5096 cpup->core_id,5097 (cpup->flag & LPFC_CPU_MAP_HYPER),5098 (cpup->flag & LPFC_CPU_MAP_UNASSIGN),5099 lpfc_get_irq(cpup->eq));5100 }5101 5102 phba->sli4_hba.curr_disp_cpu++;5103 5104 /* display max number of CPUs keeping some margin */5105 if (phba->sli4_hba.curr_disp_cpu <5106 phba->sli4_hba.num_possible_cpu &&5107 (len >= (PAGE_SIZE - 64))) {5108 len += scnprintf(buf + len,5109 PAGE_SIZE - len, "more...\n");5110 break;5111 }5112 }5113 5114 if (phba->sli4_hba.curr_disp_cpu == phba->sli4_hba.num_possible_cpu)5115 phba->sli4_hba.curr_disp_cpu = 0;5116 5117 return len;5118}5119 5120/**5121 * lpfc_fcp_cpu_map_store - Change CPU affinity of driver vectors5122 * @dev: class device that is converted into a Scsi_host.5123 * @attr: device attribute, not used.5124 * @buf: one or more lpfc_polling_flags values.5125 * @count: not used.5126 *5127 * Returns:5128 * -EINVAL - Not implemented yet.5129 **/5130static ssize_t5131lpfc_fcp_cpu_map_store(struct device *dev, struct device_attribute *attr,5132 const char *buf, size_t count)5133{5134 return -EINVAL;5135}5136 5137/*5138# lpfc_fcp_cpu_map: Defines how to map CPUs to IRQ vectors5139# for the HBA.5140#5141# Value range is [0 to 1]. Default value is LPFC_HBA_CPU_MAP (1).5142# 0 - Do not affinitze IRQ vectors5143# 1 - Affintize HBA vectors with respect to each HBA5144# (start with CPU0 for each HBA)5145# This also defines how Hardware Queues are mapped to specific CPUs.5146*/5147static int lpfc_fcp_cpu_map = LPFC_HBA_CPU_MAP;5148module_param(lpfc_fcp_cpu_map, int, S_IRUGO|S_IWUSR);5149MODULE_PARM_DESC(lpfc_fcp_cpu_map,5150 "Defines how to map CPUs to IRQ vectors per HBA");5151 5152/**5153 * lpfc_fcp_cpu_map_init - Set the initial sr-iov virtual function enable5154 * @phba: lpfc_hba pointer.5155 * @val: link speed value.5156 *5157 * Description:5158 * If val is in a valid range [0-2], then affinitze the adapter's5159 * MSIX vectors.5160 *5161 * Returns:5162 * zero if val saved.5163 * -EINVAL val out of range5164 **/5165static int5166lpfc_fcp_cpu_map_init(struct lpfc_hba *phba, int val)5167{5168 if (phba->sli_rev != LPFC_SLI_REV4) {5169 phba->cfg_fcp_cpu_map = 0;5170 return 0;5171 }5172 5173 if (val >= LPFC_MIN_CPU_MAP && val <= LPFC_MAX_CPU_MAP) {5174 phba->cfg_fcp_cpu_map = val;5175 return 0;5176 }5177 5178 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,5179 "3326 lpfc_fcp_cpu_map: %d out of range, using "5180 "default\n", val);5181 phba->cfg_fcp_cpu_map = LPFC_HBA_CPU_MAP;5182 5183 return 0;5184}5185 5186static DEVICE_ATTR_RW(lpfc_fcp_cpu_map);5187 5188/*5189# lpfc_fcp_class: Determines FC class to use for the FCP protocol.5190# Value range is [2,3]. Default value is 3.5191*/5192LPFC_VPORT_ATTR_R(fcp_class, 3, 2, 3,5193 "Select Fibre Channel class of service for FCP sequences");5194 5195/*5196# lpfc_use_adisc: Use ADISC for FCP rediscovery instead of PLOGI. Value range5197# is [0,1]. Default value is 1.5198*/5199LPFC_VPORT_ATTR_RW(use_adisc, 1, 0, 1,5200 "Use ADISC on rediscovery to authenticate FCP devices");5201 5202/*5203# lpfc_first_burst_size: First burst size to use on the NPorts5204# that support first burst.5205# Value range is [0,65536]. Default value is 0.5206*/5207LPFC_VPORT_ATTR_RW(first_burst_size, 0, 0, 65536,5208 "First burst size for Targets that support first burst");5209 5210/*5211* lpfc_nvmet_fb_size: NVME Target mode supported first burst size.5212* When the driver is configured as an NVME target, this value is5213* communicated to the NVME initiator in the PRLI response. It is5214* used only when the lpfc_nvme_enable_fb and lpfc_nvmet_support5215* parameters are set and the target is sending the PRLI RSP.5216* Parameter supported on physical port only - no NPIV support.5217* Value range is [0,65536]. Default value is 0.5218*/5219LPFC_ATTR_RW(nvmet_fb_size, 0, 0, 65536,5220 "NVME Target mode first burst size in 512B increments.");5221 5222/*5223 * lpfc_nvme_enable_fb: Enable NVME first burst on I and T functions.5224 * For the Initiator (I), enabling this parameter means that an NVMET5225 * PRLI response with FBA enabled and an FB_SIZE set to a nonzero value will be5226 * processed by the initiator for subsequent NVME FCP IO.5227 * Currently, this feature is not supported on the NVME target5228 * Value range is [0,1]. Default value is 0 (disabled).5229 */5230LPFC_ATTR_RW(nvme_enable_fb, 0, 0, 1,5231 "Enable First Burst feature for NVME Initiator.");5232 5233/*5234# lpfc_max_scsicmpl_time: Use scsi command completion time to control I/O queue5235# depth. Default value is 0. When the value of this parameter is zero the5236# SCSI command completion time is not used for controlling I/O queue depth. When5237# the parameter is set to a non-zero value, the I/O queue depth is controlled5238# to limit the I/O completion time to the parameter value.5239# The value is set in milliseconds.5240*/5241LPFC_VPORT_ATTR(max_scsicmpl_time, 0, 0, 60000,5242 "Use command completion time to control queue depth");5243 5244lpfc_vport_param_show(max_scsicmpl_time);5245static int5246lpfc_max_scsicmpl_time_set(struct lpfc_vport *vport, int val)5247{5248 struct lpfc_nodelist *ndlp, *next_ndlp;5249 unsigned long iflags;5250 5251 if (val == vport->cfg_max_scsicmpl_time)5252 return 0;5253 if ((val < 0) || (val > 60000))5254 return -EINVAL;5255 vport->cfg_max_scsicmpl_time = val;5256 5257 spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags);5258 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {5259 if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)5260 continue;5261 ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth;5262 }5263 spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags);5264 return 0;5265}5266lpfc_vport_param_store(max_scsicmpl_time);5267static DEVICE_ATTR_RW(lpfc_max_scsicmpl_time);5268 5269/*5270# lpfc_ack0: Use ACK0, instead of ACK1 for class 2 acknowledgement. Value5271# range is [0,1]. Default value is 0.5272*/5273LPFC_ATTR_R(ack0, 0, 0, 1, "Enable ACK0 support");5274 5275/*5276# lpfc_xri_rebalancing: enable or disable XRI rebalancing feature5277# range is [0,1]. Default value is 1.5278*/5279LPFC_ATTR_R(xri_rebalancing, 1, 0, 1, "Enable/Disable XRI rebalancing");5280 5281/*5282 * lpfc_io_sched: Determine scheduling algrithmn for issuing FCP cmds5283 * range is [0,1]. Default value is 0.5284 * For [0], FCP commands are issued to Work Queues based on upper layer5285 * hardware queue index.5286 * For [1], FCP commands are issued to a Work Queue associated with the5287 * current CPU.5288 *5289 * LPFC_FCP_SCHED_BY_HDWQ == 05290 * LPFC_FCP_SCHED_BY_CPU == 15291 *5292 * The driver dynamically sets this to 1 (BY_CPU) if it's able to set up cpu5293 * affinity for FCP/NVME I/Os through Work Queues associated with the current5294 * CPU. Otherwise, the default 0 (Round Robin) scheduling of FCP/NVME I/Os5295 * through WQs will be used.5296 */5297LPFC_ATTR_RW(fcp_io_sched, LPFC_FCP_SCHED_BY_CPU,5298 LPFC_FCP_SCHED_BY_HDWQ,5299 LPFC_FCP_SCHED_BY_CPU,5300 "Determine scheduling algorithm for "5301 "issuing commands [0] - Hardware Queue, [1] - Current CPU");5302 5303/*5304 * lpfc_ns_query: Determine algrithmn for NameServer queries after RSCN5305 * range is [0,1]. Default value is 0.5306 * For [0], GID_FT is used for NameServer queries after RSCN (default)5307 * For [1], GID_PT is used for NameServer queries after RSCN5308 *5309 */5310LPFC_ATTR_RW(ns_query, LPFC_NS_QUERY_GID_FT,5311 LPFC_NS_QUERY_GID_FT, LPFC_NS_QUERY_GID_PT,5312 "Determine algorithm NameServer queries after RSCN "5313 "[0] - GID_FT, [1] - GID_PT");5314 5315/*5316# lpfc_fcp2_no_tgt_reset: Determine bus reset behavior5317# range is [0,1]. Default value is 0.5318# For [0], bus reset issues target reset to ALL devices5319# For [1], bus reset issues target reset to non-FCP2 devices5320*/5321LPFC_ATTR_RW(fcp2_no_tgt_reset, 0, 0, 1, "Determine bus reset behavior for "5322 "FCP2 devices [0] - issue tgt reset, [1] - no tgt reset");5323 5324 5325/*5326# lpfc_cr_delay & lpfc_cr_count: Default values for I/O colaesing5327# cr_delay (msec) or cr_count outstanding commands. cr_delay can take5328# value [0,63]. cr_count can take value [1,255]. Default value of cr_delay5329# is 0. Default value of cr_count is 1. The cr_count feature is disabled if5330# cr_delay is set to 0.5331*/5332LPFC_ATTR_RW(cr_delay, 0, 0, 63, "A count of milliseconds after which an "5333 "interrupt response is generated");5334 5335LPFC_ATTR_RW(cr_count, 1, 1, 255, "A count of I/O completions after which an "5336 "interrupt response is generated");5337 5338/*5339# lpfc_multi_ring_support: Determines how many rings to spread available5340# cmd/rsp IOCB entries across.5341# Value range is [1,2]. Default value is 1.5342*/5343LPFC_ATTR_R(multi_ring_support, 1, 1, 2, "Determines number of primary "5344 "SLI rings to spread IOCB entries across");5345 5346/*5347# lpfc_multi_ring_rctl: If lpfc_multi_ring_support is enabled, this5348# identifies what rctl value to configure the additional ring for.5349# Value range is [1,0xff]. Default value is 4 (Unsolicated Data).5350*/5351LPFC_ATTR_R(multi_ring_rctl, FC_RCTL_DD_UNSOL_DATA, 1,5352 255, "Identifies RCTL for additional ring configuration");5353 5354/*5355# lpfc_multi_ring_type: If lpfc_multi_ring_support is enabled, this5356# identifies what type value to configure the additional ring for.5357# Value range is [1,0xff]. Default value is 5 (LLC/SNAP).5358*/5359LPFC_ATTR_R(multi_ring_type, FC_TYPE_IP, 1,5360 255, "Identifies TYPE for additional ring configuration");5361 5362/*5363# lpfc_enable_SmartSAN: Sets up FDMI support for SmartSAN5364# 0 = SmartSAN functionality disabled (default)5365# 1 = SmartSAN functionality enabled5366# This parameter will override the value of lpfc_fdmi_on module parameter.5367# Value range is [0,1]. Default value is 0.5368*/5369LPFC_ATTR_R(enable_SmartSAN, 0, 0, 1, "Enable SmartSAN functionality");5370 5371/*5372# lpfc_fdmi_on: Controls FDMI support.5373# 0 No FDMI support5374# 1 Traditional FDMI support (default)5375# Traditional FDMI support means the driver will assume FDMI-2 support;5376# however, if that fails, it will fallback to FDMI-1.5377# If lpfc_enable_SmartSAN is set to 1, the driver ignores lpfc_fdmi_on.5378# If lpfc_enable_SmartSAN is set 0, the driver uses the current value of5379# lpfc_fdmi_on.5380# Value range [0,1]. Default value is 1.5381*/5382LPFC_ATTR_R(fdmi_on, 1, 0, 1, "Enable FDMI support");5383 5384/*5385# Specifies the maximum number of ELS cmds we can have outstanding (for5386# discovery). Value range is [1,64]. Default value = 32.5387*/5388LPFC_VPORT_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands "5389 "during discovery");5390 5391/*5392# lpfc_max_luns: maximum allowed LUN ID. This is the highest LUN ID that5393# will be scanned by the SCSI midlayer when sequential scanning is5394# used; and is also the highest LUN ID allowed when the SCSI midlayer5395# parses REPORT_LUN responses. The lpfc driver has no LUN count or5396# LUN ID limit, but the SCSI midlayer requires this field for the uses5397# above. The lpfc driver limits the default value to 255 for two reasons.5398# As it bounds the sequential scan loop, scanning for thousands of luns5399# on a target can take minutes of wall clock time. Additionally,5400# there are FC targets, such as JBODs, that only recognize 8-bits of5401# LUN ID. When they receive a value greater than 8 bits, they chop off5402# the high order bits. In other words, they see LUN IDs 0, 256, 512,5403# and so on all as LUN ID 0. This causes the linux kernel, which sees5404# valid responses at each of the LUN IDs, to believe there are multiple5405# devices present, when in fact, there is only 1.5406# A customer that is aware of their target behaviors, and the results as5407# indicated above, is welcome to increase the lpfc_max_luns value.5408# As mentioned, this value is not used by the lpfc driver, only the5409# SCSI midlayer.5410# Value range is [0,65535]. Default value is 255.5411# NOTE: The SCSI layer might probe all allowed LUN on some old targets.5412*/5413LPFC_VPORT_ULL_ATTR_R(max_luns, 255, 0, 65535, "Maximum allowed LUN ID");5414 5415/*5416# lpfc_poll_tmo: .Milliseconds driver will wait between polling FCP ring.5417# Value range is [1,255], default value is 10.5418*/5419LPFC_ATTR_RW(poll_tmo, 10, 1, 255,5420 "Milliseconds driver will wait between polling FCP ring");5421 5422/*5423# lpfc_task_mgmt_tmo: Maximum time to wait for task management commands5424# to complete in seconds. Value range is [5,180], default value is 60.5425*/5426LPFC_ATTR_RW(task_mgmt_tmo, 60, 5, 180,5427 "Maximum time to wait for task management commands to complete");5428/*5429# lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that5430# support this feature5431# 0 = MSI disabled5432# 1 = MSI enabled5433# 2 = MSI-X enabled (default)5434# Value range is [0,2]. Default value is 2.5435*/5436LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "5437 "MSI-X (2), if possible");5438 5439/*5440 * lpfc_nvme_oas: Use the oas bit when sending NVME/NVMET IOs5441 *5442 * 0 = NVME OAS disabled5443 * 1 = NVME OAS enabled5444 *5445 * Value range is [0,1]. Default value is 0.5446 */5447LPFC_ATTR_RW(nvme_oas, 0, 0, 1,5448 "Use OAS bit on NVME IOs");5449 5450/*5451 * lpfc_nvme_embed_cmd: Use the oas bit when sending NVME/NVMET IOs5452 *5453 * 0 = Put NVME Command in SGL5454 * 1 = Embed NVME Command in WQE (unless G7)5455 * 2 = Embed NVME Command in WQE (force)5456 *5457 * Value range is [0,2]. Default value is 1.5458 */5459LPFC_ATTR_RW(nvme_embed_cmd, 1, 0, 2,5460 "Embed NVME Command in WQE");5461 5462/*5463 * lpfc_fcp_mq_threshold: Set the maximum number of Hardware Queues5464 * the driver will advertise it supports to the SCSI layer.5465 *5466 * 0 = Set nr_hw_queues by the number of CPUs or HW queues.5467 * 1,256 = Manually specify nr_hw_queue value to be advertised,5468 *5469 * Value range is [0,256]. Default value is 8.5470 */5471LPFC_ATTR_R(fcp_mq_threshold, LPFC_FCP_MQ_THRESHOLD_DEF,5472 LPFC_FCP_MQ_THRESHOLD_MIN, LPFC_FCP_MQ_THRESHOLD_MAX,5473 "Set the number of SCSI Queues advertised");5474 5475/*5476 * lpfc_hdw_queue: Set the number of Hardware Queues the driver5477 * will advertise it supports to the NVME and SCSI layers. This also5478 * will map to the number of CQ/WQ pairs the driver will create.5479 *5480 * The NVME Layer will try to create this many, plus 1 administrative5481 * hardware queue. The administrative queue will always map to WQ 05482 * A hardware IO queue maps (qidx) to a specific driver CQ/WQ.5483 *5484 * 0 = Configure the number of hdw queues to the number of active CPUs.5485 * 1,256 = Manually specify how many hdw queues to use.5486 *5487 * Value range is [0,256]. Default value is 0.5488 */5489LPFC_ATTR_R(hdw_queue,5490 LPFC_HBA_HDWQ_DEF,5491 LPFC_HBA_HDWQ_MIN, LPFC_HBA_HDWQ_MAX,5492 "Set the number of I/O Hardware Queues");5493 5494#if IS_ENABLED(CONFIG_X86)5495/**5496 * lpfc_cpumask_irq_mode_init - initalizes cpumask of phba based on5497 * irq_chann_mode5498 * @phba: Pointer to HBA context object.5499 **/5500static void5501lpfc_cpumask_irq_mode_init(struct lpfc_hba *phba)5502{5503 unsigned int cpu, first_cpu, numa_node = NUMA_NO_NODE;5504 const struct cpumask *sibling_mask;5505 struct cpumask *aff_mask = &phba->sli4_hba.irq_aff_mask;5506 5507 cpumask_clear(aff_mask);5508 5509 if (phba->irq_chann_mode == NUMA_MODE) {5510 /* Check if we're a NUMA architecture */5511 numa_node = dev_to_node(&phba->pcidev->dev);5512 if (numa_node == NUMA_NO_NODE) {5513 phba->irq_chann_mode = NORMAL_MODE;5514 return;5515 }5516 }5517 5518 for_each_possible_cpu(cpu) {5519 switch (phba->irq_chann_mode) {5520 case NUMA_MODE:5521 if (cpu_to_node(cpu) == numa_node)5522 cpumask_set_cpu(cpu, aff_mask);5523 break;5524 case NHT_MODE:5525 sibling_mask = topology_sibling_cpumask(cpu);5526 first_cpu = cpumask_first(sibling_mask);5527 if (first_cpu < nr_cpu_ids)5528 cpumask_set_cpu(first_cpu, aff_mask);5529 break;5530 default:5531 break;5532 }5533 }5534}5535#endif5536 5537static void5538lpfc_assign_default_irq_chann(struct lpfc_hba *phba)5539{5540#if IS_ENABLED(CONFIG_X86)5541 switch (boot_cpu_data.x86_vendor) {5542 case X86_VENDOR_AMD:5543 /* If AMD architecture, then default is NUMA_MODE */5544 phba->irq_chann_mode = NUMA_MODE;5545 break;5546 case X86_VENDOR_INTEL:5547 /* If Intel architecture, then default is no hyperthread mode */5548 phba->irq_chann_mode = NHT_MODE;5549 break;5550 default:5551 phba->irq_chann_mode = NORMAL_MODE;5552 break;5553 }5554 lpfc_cpumask_irq_mode_init(phba);5555#else5556 phba->irq_chann_mode = NORMAL_MODE;5557#endif5558}5559 5560/*5561 * lpfc_irq_chann: Set the number of IRQ vectors that are available5562 * for Hardware Queues to utilize. This also will map to the number5563 * of EQ / MSI-X vectors the driver will create. This should never be5564 * more than the number of Hardware Queues5565 *5566 * 0 = Configure number of IRQ Channels to:5567 * if AMD architecture, number of CPUs on HBA's NUMA node5568 * if Intel architecture, number of physical CPUs.5569 * otherwise, number of active CPUs.5570 * [1,256] = Manually specify how many IRQ Channels to use.5571 *5572 * Value range is [0,256]. Default value is [0].5573 */5574static uint lpfc_irq_chann = LPFC_IRQ_CHANN_DEF;5575module_param(lpfc_irq_chann, uint, 0444);5576MODULE_PARM_DESC(lpfc_irq_chann, "Set number of interrupt vectors to allocate");5577 5578/* lpfc_irq_chann_init - Set the hba irq_chann initial value5579 * @phba: lpfc_hba pointer.5580 * @val: contains the initial value5581 *5582 * Description:5583 * Validates the initial value is within range and assigns it to the5584 * adapter. If not in range, an error message is posted and the5585 * default value is assigned.5586 *5587 * Returns:5588 * zero if value is in range and is set5589 * -EINVAL if value was out of range5590 **/5591static int5592lpfc_irq_chann_init(struct lpfc_hba *phba, uint32_t val)5593{5594 const struct cpumask *aff_mask;5595 5596 if (phba->cfg_use_msi != 2) {5597 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,5598 "8532 use_msi = %u ignoring cfg_irq_numa\n",5599 phba->cfg_use_msi);5600 phba->irq_chann_mode = NORMAL_MODE;5601 phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF;5602 return 0;5603 }5604 5605 /* Check if default setting was passed */5606 if (val == LPFC_IRQ_CHANN_DEF &&5607 phba->cfg_hdw_queue == LPFC_HBA_HDWQ_DEF &&5608 phba->sli_rev == LPFC_SLI_REV4)5609 lpfc_assign_default_irq_chann(phba);5610 5611 if (phba->irq_chann_mode != NORMAL_MODE) {5612 aff_mask = &phba->sli4_hba.irq_aff_mask;5613 5614 if (cpumask_empty(aff_mask)) {5615 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,5616 "8533 Could not identify CPUS for "5617 "mode %d, ignoring\n",5618 phba->irq_chann_mode);5619 phba->irq_chann_mode = NORMAL_MODE;5620 phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF;5621 } else {5622 phba->cfg_irq_chann = cpumask_weight(aff_mask);5623 5624 /* If no hyperthread mode, then set hdwq count to5625 * aff_mask weight as well5626 */5627 if (phba->irq_chann_mode == NHT_MODE)5628 phba->cfg_hdw_queue = phba->cfg_irq_chann;5629 5630 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,5631 "8543 lpfc_irq_chann set to %u "5632 "(mode: %d)\n", phba->cfg_irq_chann,5633 phba->irq_chann_mode);5634 }5635 } else {5636 if (val > LPFC_IRQ_CHANN_MAX) {5637 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,5638 "8545 lpfc_irq_chann attribute cannot "5639 "be set to %u, allowed range is "5640 "[%u,%u]\n",5641 val,5642 LPFC_IRQ_CHANN_MIN,5643 LPFC_IRQ_CHANN_MAX);5644 phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF;5645 return -EINVAL;5646 }5647 if (phba->sli_rev == LPFC_SLI_REV4) {5648 phba->cfg_irq_chann = val;5649 } else {5650 phba->cfg_irq_chann = 2;5651 phba->cfg_hdw_queue = 1;5652 }5653 }5654 5655 return 0;5656}5657 5658/**5659 * lpfc_irq_chann_show - Display value of irq_chann5660 * @dev: class converted to a Scsi_host structure.5661 * @attr: device attribute, not used.5662 * @buf: on return contains a string with the list sizes5663 *5664 * Returns: size of formatted string.5665 **/5666static ssize_t5667lpfc_irq_chann_show(struct device *dev, struct device_attribute *attr,5668 char *buf)5669{5670 struct Scsi_Host *shost = class_to_shost(dev);5671 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;5672 struct lpfc_hba *phba = vport->phba;5673 5674 return scnprintf(buf, PAGE_SIZE, "%u\n", phba->cfg_irq_chann);5675}5676 5677static DEVICE_ATTR_RO(lpfc_irq_chann);5678 5679/*5680# lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware.5681# 0 = HBA resets disabled5682# 1 = HBA resets enabled (default)5683# 2 = HBA reset via PCI bus reset enabled5684# Value range is [0,2]. Default value is 1.5685*/5686LPFC_ATTR_RW(enable_hba_reset, 1, 0, 2, "Enable HBA resets from the driver.");5687 5688/*5689# lpfc_enable_hba_heartbeat: Disable HBA heartbeat timer..5690# 0 = HBA Heartbeat disabled5691# 1 = HBA Heartbeat enabled (default)5692# Value range is [0,1]. Default value is 1.5693*/5694LPFC_ATTR_R(enable_hba_heartbeat, 0, 0, 1, "Enable HBA Heartbeat.");5695 5696/*5697# lpfc_EnableXLane: Enable Express Lane Feature5698# 0x0 Express Lane Feature disabled5699# 0x1 Express Lane Feature enabled5700# Value range is [0,1]. Default value is 0.5701*/5702LPFC_ATTR_R(EnableXLane, 0, 0, 1, "Enable Express Lane Feature.");5703 5704/*5705# lpfc_XLanePriority: Define CS_CTL priority for Express Lane Feature5706# 0x0 - 0x7f = CS_CTL field in FC header (high 7 bits)5707# Value range is [0x0,0x7f]. Default value is 05708*/5709LPFC_ATTR_RW(XLanePriority, 0, 0x0, 0x7f, "CS_CTL for Express Lane Feature.");5710 5711/*5712# lpfc_enable_bg: Enable BlockGuard (Emulex's Implementation of T10-DIF)5713# 0 = BlockGuard disabled (default)5714# 1 = BlockGuard enabled5715# Value range is [0,1]. Default value is 0.5716*/5717LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support");5718 5719/*5720# lpfc_prot_mask:5721# - Bit mask of host protection capabilities used to register with the5722# SCSI mid-layer5723# - Only meaningful if BG is turned on (lpfc_enable_bg=1).5724# - Allows you to ultimately specify which profiles to use5725# - Default will result in registering capabilities for all profiles.5726# - SHOST_DIF_TYPE1_PROTECTION 15727# HBA supports T10 DIF Type 1: HBA to Target Type 1 Protection5728# - SHOST_DIX_TYPE0_PROTECTION 85729# HBA supports DIX Type 0: Host to HBA protection only5730# - SHOST_DIX_TYPE1_PROTECTION 165731# HBA supports DIX Type 1: Host to HBA Type 1 protection5732#5733*/5734LPFC_ATTR(prot_mask,5735 (SHOST_DIF_TYPE1_PROTECTION |5736 SHOST_DIX_TYPE0_PROTECTION |5737 SHOST_DIX_TYPE1_PROTECTION),5738 0,5739 (SHOST_DIF_TYPE1_PROTECTION |5740 SHOST_DIX_TYPE0_PROTECTION |5741 SHOST_DIX_TYPE1_PROTECTION),5742 "T10-DIF host protection capabilities mask");5743 5744/*5745# lpfc_prot_guard:5746# - Bit mask of protection guard types to register with the SCSI mid-layer5747# - Guard types are currently either 1) T10-DIF CRC 2) IP checksum5748# - Allows you to ultimately specify which profiles to use5749# - Default will result in registering capabilities for all guard types5750#5751*/5752LPFC_ATTR(prot_guard,5753 SHOST_DIX_GUARD_IP, SHOST_DIX_GUARD_CRC, SHOST_DIX_GUARD_IP,5754 "T10-DIF host protection guard type");5755 5756/*5757 * Delay initial NPort discovery when Clean Address bit is cleared in5758 * FLOGI/FDISC accept and FCID/Fabric name/Fabric portname is changed.5759 * This parameter can have value 0 or 1.5760 * When this parameter is set to 0, no delay is added to the initial5761 * discovery.5762 * When this parameter is set to non-zero value, initial Nport discovery is5763 * delayed by ra_tov seconds when Clean Address bit is cleared in FLOGI/FDISC5764 * accept and FCID/Fabric name/Fabric portname is changed.5765 * Driver always delay Nport discovery for subsequent FLOGI/FDISC completion5766 * when Clean Address bit is cleared in FLOGI/FDISC5767 * accept and FCID/Fabric name/Fabric portname is changed.5768 * Default value is 0.5769 */5770LPFC_ATTR(delay_discovery, 0, 0, 1,5771 "Delay NPort discovery when Clean Address bit is cleared.");5772 5773/*5774 * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count5775 * This value can be set to values between 64 and 4096. The default value5776 * is 64, but may be increased to allow for larger Max I/O sizes. The scsi5777 * and nvme layers will allow I/O sizes up to (MAX_SEG_COUNT * SEG_SIZE).5778 * Because of the additional overhead involved in setting up T10-DIF,5779 * this parameter will be limited to 128 if BlockGuard is enabled under SLI45780 * and will be limited to 512 if BlockGuard is enabled under SLI3.5781 */5782static uint lpfc_sg_seg_cnt = LPFC_DEFAULT_SG_SEG_CNT;5783module_param(lpfc_sg_seg_cnt, uint, 0444);5784MODULE_PARM_DESC(lpfc_sg_seg_cnt, "Max Scatter Gather Segment Count");5785 5786/**5787 * lpfc_sg_seg_cnt_show - Display the scatter/gather list sizes5788 * configured for the adapter5789 * @dev: class converted to a Scsi_host structure.5790 * @attr: device attribute, not used.5791 * @buf: on return contains a string with the list sizes5792 *5793 * Returns: size of formatted string.5794 **/5795static ssize_t5796lpfc_sg_seg_cnt_show(struct device *dev, struct device_attribute *attr,5797 char *buf)5798{5799 struct Scsi_Host *shost = class_to_shost(dev);5800 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;5801 struct lpfc_hba *phba = vport->phba;5802 int len;5803 5804 len = scnprintf(buf, PAGE_SIZE, "SGL sz: %d total SGEs: %d\n",5805 phba->cfg_sg_dma_buf_size, phba->cfg_total_seg_cnt);5806 5807 len += scnprintf(buf + len, PAGE_SIZE - len,5808 "Cfg: %d SCSI: %d NVME: %d\n",5809 phba->cfg_sg_seg_cnt, phba->cfg_scsi_seg_cnt,5810 phba->cfg_nvme_seg_cnt);5811 return len;5812}5813 5814static DEVICE_ATTR_RO(lpfc_sg_seg_cnt);5815 5816/**5817 * lpfc_sg_seg_cnt_init - Set the hba sg_seg_cnt initial value5818 * @phba: lpfc_hba pointer.5819 * @val: contains the initial value5820 *5821 * Description:5822 * Validates the initial value is within range and assigns it to the5823 * adapter. If not in range, an error message is posted and the5824 * default value is assigned.5825 *5826 * Returns:5827 * zero if value is in range and is set5828 * -EINVAL if value was out of range5829 **/5830static int5831lpfc_sg_seg_cnt_init(struct lpfc_hba *phba, int val)5832{5833 if (val >= LPFC_MIN_SG_SEG_CNT && val <= LPFC_MAX_SG_SEG_CNT) {5834 phba->cfg_sg_seg_cnt = val;5835 return 0;5836 }5837 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,5838 "0409 lpfc_sg_seg_cnt attribute cannot be set to %d, "5839 "allowed range is [%d, %d]\n",5840 val, LPFC_MIN_SG_SEG_CNT, LPFC_MAX_SG_SEG_CNT);5841 phba->cfg_sg_seg_cnt = LPFC_DEFAULT_SG_SEG_CNT;5842 return -EINVAL;5843}5844 5845/*5846 * lpfc_enable_mds_diags: Enable MDS Diagnostics5847 * 0 = MDS Diagnostics disabled (default)5848 * 1 = MDS Diagnostics enabled5849 * Value range is [0,1]. Default value is 0.5850 */5851LPFC_ATTR_RW(enable_mds_diags, 0, 0, 1, "Enable MDS Diagnostics");5852 5853/*5854 * lpfc_ras_fwlog_buffsize: Firmware logging host buffer size5855 * 0 = Disable firmware logging (default)5856 * [1-4] = Multiple of 1/4th Mb of host memory for FW logging5857 * Value range [0..4]. Default value is 05858 */5859LPFC_ATTR(ras_fwlog_buffsize, 0, 0, 4, "Host memory for FW logging");5860lpfc_param_show(ras_fwlog_buffsize);5861 5862static ssize_t5863lpfc_ras_fwlog_buffsize_set(struct lpfc_hba *phba, uint val)5864{5865 int ret = 0;5866 enum ras_state state;5867 5868 if (!lpfc_rangecheck(val, 0, 4))5869 return -EINVAL;5870 5871 if (phba->cfg_ras_fwlog_buffsize == val)5872 return 0;5873 5874 if (phba->cfg_ras_fwlog_func != PCI_FUNC(phba->pcidev->devfn))5875 return -EINVAL;5876 5877 spin_lock_irq(&phba->ras_fwlog_lock);5878 state = phba->ras_fwlog.state;5879 spin_unlock_irq(&phba->ras_fwlog_lock);5880 5881 if (state == REG_INPROGRESS) {5882 lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "6147 RAS Logging "5883 "registration is in progress\n");5884 return -EBUSY;5885 }5886 5887 /* For disable logging: stop the logs and free the DMA.5888 * For ras_fwlog_buffsize size change we still need to free and5889 * reallocate the DMA in lpfc_sli4_ras_fwlog_init.5890 */5891 phba->cfg_ras_fwlog_buffsize = val;5892 if (state == ACTIVE) {5893 lpfc_ras_stop_fwlog(phba);5894 lpfc_sli4_ras_dma_free(phba);5895 }5896 5897 lpfc_sli4_ras_init(phba);5898 if (phba->ras_fwlog.ras_enabled)5899 ret = lpfc_sli4_ras_fwlog_init(phba, phba->cfg_ras_fwlog_level,5900 LPFC_RAS_ENABLE_LOGGING);5901 return ret;5902}5903 5904lpfc_param_store(ras_fwlog_buffsize);5905static DEVICE_ATTR_RW(lpfc_ras_fwlog_buffsize);5906 5907/*5908 * lpfc_ras_fwlog_level: Firmware logging verbosity level5909 * Valid only if firmware logging is enabled5910 * 0(Least Verbosity) 4 (most verbosity)5911 * Value range is [0..4]. Default value is 05912 */5913LPFC_ATTR_RW(ras_fwlog_level, 0, 0, 4, "Firmware Logging Level");5914 5915/*5916 * lpfc_ras_fwlog_func: Firmware logging enabled on function number5917 * Default function which has RAS support : 05918 * Value Range is [0..3].5919 * FW logging is a global action and enablement is via a specific5920 * port.5921 */5922LPFC_ATTR_RW(ras_fwlog_func, 0, 0, 3, "Firmware Logging Enabled on Function");5923 5924/*5925 * lpfc_enable_bbcr: Enable BB Credit Recovery5926 * 0 = BB Credit Recovery disabled5927 * 1 = BB Credit Recovery enabled (default)5928 * Value range is [0,1]. Default value is 1.5929 */5930LPFC_BBCR_ATTR_RW(enable_bbcr, 1, 0, 1, "Enable BBC Recovery");5931 5932/* Signaling module parameters */5933int lpfc_fabric_cgn_frequency = 100; /* 100 ms default */5934module_param(lpfc_fabric_cgn_frequency, int, 0444);5935MODULE_PARM_DESC(lpfc_fabric_cgn_frequency, "Congestion signaling fabric freq");5936 5937unsigned char lpfc_acqe_cgn_frequency = 10; /* 10 sec default */5938module_param(lpfc_acqe_cgn_frequency, byte, 0444);5939MODULE_PARM_DESC(lpfc_acqe_cgn_frequency, "Congestion signaling ACQE freq");5940 5941int lpfc_use_cgn_signal = 1; /* 0 - only use FPINs, 1 - Use signals if avail */5942module_param(lpfc_use_cgn_signal, int, 0444);5943MODULE_PARM_DESC(lpfc_use_cgn_signal, "Use Congestion signaling if available");5944 5945/*5946 * lpfc_enable_dpp: Enable DPP on G75947 * 0 = DPP on G7 disabled5948 * 1 = DPP on G7 enabled (default)5949 * Value range is [0,1]. Default value is 1.5950 */5951LPFC_ATTR_RW(enable_dpp, 1, 0, 1, "Enable Direct Packet Push");5952 5953/*5954 * lpfc_enable_mi: Enable FDMI MIB5955 * 0 = disabled5956 * 1 = enabled (default)5957 * Value range is [0,1].5958 */5959LPFC_ATTR_R(enable_mi, 1, 0, 1, "Enable MI");5960 5961/*5962 * lpfc_max_vmid: Maximum number of VMs to be tagged. This is valid only if5963 * either vmid_app_header or vmid_priority_tagging is enabled.5964 * 4 - 255 = vmid support enabled for 4-255 VMs5965 * Value range is [4,255].5966 */5967LPFC_ATTR_R(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID,5968 "Maximum number of VMs supported");5969 5970/*5971 * lpfc_vmid_inactivity_timeout: Inactivity timeout duration in hours5972 * 0 = Timeout is disabled5973 * Value range is [0,24].5974 */5975LPFC_ATTR_R(vmid_inactivity_timeout, 4, 0, 24,5976 "Inactivity timeout in hours");5977 5978/*5979 * lpfc_vmid_app_header: Enable App Header VMID support5980 * 0 = Support is disabled (default)5981 * 1 = Support is enabled5982 * Value range is [0,1].5983 */5984LPFC_ATTR_R(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE,5985 LPFC_VMID_APP_HEADER_DISABLE, LPFC_VMID_APP_HEADER_ENABLE,5986 "Enable App Header VMID support");5987 5988/*5989 * lpfc_vmid_priority_tagging: Enable Priority Tagging VMID support5990 * 0 = Support is disabled (default)5991 * 1 = Allow supported targets only5992 * 2 = Allow all targets5993 * Value range is [0,2].5994 */5995LPFC_ATTR_R(vmid_priority_tagging, LPFC_VMID_PRIO_TAG_DISABLE,5996 LPFC_VMID_PRIO_TAG_DISABLE,5997 LPFC_VMID_PRIO_TAG_ALL_TARGETS,5998 "Enable Priority Tagging VMID support");5999 6000static struct attribute *lpfc_hba_attrs[] = {6001 &dev_attr_nvme_info.attr,6002 &dev_attr_scsi_stat.attr,6003 &dev_attr_bg_info.attr,6004 &dev_attr_bg_guard_err.attr,6005 &dev_attr_bg_apptag_err.attr,6006 &dev_attr_bg_reftag_err.attr,6007 &dev_attr_info.attr,6008 &dev_attr_serialnum.attr,6009 &dev_attr_modeldesc.attr,6010 &dev_attr_modelname.attr,6011 &dev_attr_programtype.attr,6012 &dev_attr_portnum.attr,6013 &dev_attr_fwrev.attr,6014 &dev_attr_hdw.attr,6015 &dev_attr_option_rom_version.attr,6016 &dev_attr_link_state.attr,6017 &dev_attr_num_discovered_ports.attr,6018 &dev_attr_lpfc_drvr_version.attr,6019 &dev_attr_lpfc_enable_fip.attr,6020 &dev_attr_lpfc_temp_sensor.attr,6021 &dev_attr_lpfc_log_verbose.attr,6022 &dev_attr_lpfc_lun_queue_depth.attr,6023 &dev_attr_lpfc_tgt_queue_depth.attr,6024 &dev_attr_lpfc_hba_queue_depth.attr,6025 &dev_attr_lpfc_peer_port_login.attr,6026 &dev_attr_lpfc_nodev_tmo.attr,6027 &dev_attr_lpfc_devloss_tmo.attr,6028 &dev_attr_lpfc_enable_fc4_type.attr,6029 &dev_attr_lpfc_fcp_class.attr,6030 &dev_attr_lpfc_use_adisc.attr,6031 &dev_attr_lpfc_first_burst_size.attr,6032 &dev_attr_lpfc_ack0.attr,6033 &dev_attr_lpfc_xri_rebalancing.attr,6034 &dev_attr_lpfc_topology.attr,6035 &dev_attr_lpfc_scan_down.attr,6036 &dev_attr_lpfc_link_speed.attr,6037 &dev_attr_lpfc_fcp_io_sched.attr,6038 &dev_attr_lpfc_ns_query.attr,6039 &dev_attr_lpfc_fcp2_no_tgt_reset.attr,6040 &dev_attr_lpfc_cr_delay.attr,6041 &dev_attr_lpfc_cr_count.attr,6042 &dev_attr_lpfc_multi_ring_support.attr,6043 &dev_attr_lpfc_multi_ring_rctl.attr,6044 &dev_attr_lpfc_multi_ring_type.attr,6045 &dev_attr_lpfc_fdmi_on.attr,6046 &dev_attr_lpfc_enable_SmartSAN.attr,6047 &dev_attr_lpfc_max_luns.attr,6048 &dev_attr_lpfc_enable_npiv.attr,6049 &dev_attr_lpfc_fcf_failover_policy.attr,6050 &dev_attr_lpfc_enable_rrq.attr,6051 &dev_attr_lpfc_fcp_wait_abts_rsp.attr,6052 &dev_attr_nport_evt_cnt.attr,6053 &dev_attr_board_mode.attr,6054 &dev_attr_lpfc_xcvr_data.attr,6055 &dev_attr_max_vpi.attr,6056 &dev_attr_used_vpi.attr,6057 &dev_attr_max_rpi.attr,6058 &dev_attr_used_rpi.attr,6059 &dev_attr_max_xri.attr,6060 &dev_attr_used_xri.attr,6061 &dev_attr_npiv_info.attr,6062 &dev_attr_issue_reset.attr,6063 &dev_attr_lpfc_poll.attr,6064 &dev_attr_lpfc_poll_tmo.attr,6065 &dev_attr_lpfc_task_mgmt_tmo.attr,6066 &dev_attr_lpfc_use_msi.attr,6067 &dev_attr_lpfc_nvme_oas.attr,6068 &dev_attr_lpfc_nvme_embed_cmd.attr,6069 &dev_attr_lpfc_fcp_imax.attr,6070 &dev_attr_lpfc_force_rscn.attr,6071 &dev_attr_lpfc_cq_poll_threshold.attr,6072 &dev_attr_lpfc_cq_max_proc_limit.attr,6073 &dev_attr_lpfc_fcp_cpu_map.attr,6074 &dev_attr_lpfc_fcp_mq_threshold.attr,6075 &dev_attr_lpfc_hdw_queue.attr,6076 &dev_attr_lpfc_irq_chann.attr,6077 &dev_attr_lpfc_suppress_rsp.attr,6078 &dev_attr_lpfc_nvmet_mrq.attr,6079 &dev_attr_lpfc_nvmet_mrq_post.attr,6080 &dev_attr_lpfc_nvme_enable_fb.attr,6081 &dev_attr_lpfc_nvmet_fb_size.attr,6082 &dev_attr_lpfc_enable_bg.attr,6083 &dev_attr_lpfc_enable_hba_reset.attr,6084 &dev_attr_lpfc_enable_hba_heartbeat.attr,6085 &dev_attr_lpfc_EnableXLane.attr,6086 &dev_attr_lpfc_XLanePriority.attr,6087 &dev_attr_lpfc_xlane_lun.attr,6088 &dev_attr_lpfc_xlane_tgt.attr,6089 &dev_attr_lpfc_xlane_vpt.attr,6090 &dev_attr_lpfc_xlane_lun_state.attr,6091 &dev_attr_lpfc_xlane_lun_status.attr,6092 &dev_attr_lpfc_xlane_priority.attr,6093 &dev_attr_lpfc_sg_seg_cnt.attr,6094 &dev_attr_lpfc_max_scsicmpl_time.attr,6095 &dev_attr_lpfc_aer_support.attr,6096 &dev_attr_lpfc_aer_state_cleanup.attr,6097 &dev_attr_lpfc_sriov_nr_virtfn.attr,6098 &dev_attr_lpfc_req_fw_upgrade.attr,6099 &dev_attr_lpfc_suppress_link_up.attr,6100 &dev_attr_iocb_hw.attr,6101 &dev_attr_pls.attr,6102 &dev_attr_pt.attr,6103 &dev_attr_txq_hw.attr,6104 &dev_attr_txcmplq_hw.attr,6105 &dev_attr_lpfc_sriov_hw_max_virtfn.attr,6106 &dev_attr_protocol.attr,6107 &dev_attr_lpfc_xlane_supported.attr,6108 &dev_attr_lpfc_enable_mds_diags.attr,6109 &dev_attr_lpfc_ras_fwlog_buffsize.attr,6110 &dev_attr_lpfc_ras_fwlog_level.attr,6111 &dev_attr_lpfc_ras_fwlog_func.attr,6112 &dev_attr_lpfc_enable_bbcr.attr,6113 &dev_attr_lpfc_enable_dpp.attr,6114 &dev_attr_lpfc_enable_mi.attr,6115 &dev_attr_cmf_info.attr,6116 &dev_attr_lpfc_max_vmid.attr,6117 &dev_attr_lpfc_vmid_inactivity_timeout.attr,6118 &dev_attr_lpfc_vmid_app_header.attr,6119 &dev_attr_lpfc_vmid_priority_tagging.attr,6120 NULL,6121};6122 6123static const struct attribute_group lpfc_hba_attr_group = {6124 .attrs = lpfc_hba_attrs6125};6126 6127const struct attribute_group *lpfc_hba_groups[] = {6128 &lpfc_hba_attr_group,6129 NULL6130};6131 6132static struct attribute *lpfc_vport_attrs[] = {6133 &dev_attr_info.attr,6134 &dev_attr_link_state.attr,6135 &dev_attr_num_discovered_ports.attr,6136 &dev_attr_lpfc_drvr_version.attr,6137 &dev_attr_lpfc_log_verbose.attr,6138 &dev_attr_lpfc_lun_queue_depth.attr,6139 &dev_attr_lpfc_tgt_queue_depth.attr,6140 &dev_attr_lpfc_nodev_tmo.attr,6141 &dev_attr_lpfc_devloss_tmo.attr,6142 &dev_attr_lpfc_hba_queue_depth.attr,6143 &dev_attr_lpfc_peer_port_login.attr,6144 &dev_attr_lpfc_restrict_login.attr,6145 &dev_attr_lpfc_fcp_class.attr,6146 &dev_attr_lpfc_use_adisc.attr,6147 &dev_attr_lpfc_first_burst_size.attr,6148 &dev_attr_lpfc_max_luns.attr,6149 &dev_attr_nport_evt_cnt.attr,6150 &dev_attr_npiv_info.attr,6151 &dev_attr_lpfc_enable_da_id.attr,6152 &dev_attr_lpfc_max_scsicmpl_time.attr,6153 &dev_attr_lpfc_static_vport.attr,6154 &dev_attr_cmf_info.attr,6155 NULL,6156};6157 6158static const struct attribute_group lpfc_vport_attr_group = {6159 .attrs = lpfc_vport_attrs6160};6161 6162const struct attribute_group *lpfc_vport_groups[] = {6163 &lpfc_vport_attr_group,6164 NULL6165};6166 6167/**6168 * sysfs_ctlreg_write - Write method for writing to ctlreg6169 * @filp: open sysfs file6170 * @kobj: kernel kobject that contains the kernel class device.6171 * @bin_attr: kernel attributes passed to us.6172 * @buf: contains the data to be written to the adapter IOREG space.6173 * @off: offset into buffer to beginning of data.6174 * @count: bytes to transfer.6175 *6176 * Description:6177 * Accessed via /sys/class/scsi_host/hostxxx/ctlreg.6178 * Uses the adapter io control registers to send buf contents to the adapter.6179 *6180 * Returns:6181 * -ERANGE off and count combo out of range6182 * -EINVAL off, count or buff address invalid6183 * -EPERM adapter is offline6184 * value of count, buf contents written6185 **/6186static ssize_t6187sysfs_ctlreg_write(struct file *filp, struct kobject *kobj,6188 struct bin_attribute *bin_attr,6189 char *buf, loff_t off, size_t count)6190{6191 size_t buf_off;6192 struct device *dev = container_of(kobj, struct device, kobj);6193 struct Scsi_Host *shost = class_to_shost(dev);6194 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;6195 struct lpfc_hba *phba = vport->phba;6196 6197 if (phba->sli_rev >= LPFC_SLI_REV4)6198 return -EPERM;6199 6200 if ((off + count) > FF_REG_AREA_SIZE)6201 return -ERANGE;6202 6203 if (count <= LPFC_REG_WRITE_KEY_SIZE)6204 return 0;6205 6206 if (off % 4 || count % 4 || (unsigned long)buf % 4)6207 return -EINVAL;6208 6209 /* This is to protect HBA registers from accidental writes. */6210 if (memcmp(buf, LPFC_REG_WRITE_KEY, LPFC_REG_WRITE_KEY_SIZE))6211 return -EINVAL;6212 6213 if (!test_bit(FC_OFFLINE_MODE, &vport->fc_flag))6214 return -EPERM;6215 6216 spin_lock_irq(&phba->hbalock);6217 for (buf_off = 0; buf_off < count - LPFC_REG_WRITE_KEY_SIZE;6218 buf_off += sizeof(uint32_t))6219 writel(*((uint32_t *)(buf + buf_off + LPFC_REG_WRITE_KEY_SIZE)),6220 phba->ctrl_regs_memmap_p + off + buf_off);6221 6222 spin_unlock_irq(&phba->hbalock);6223 6224 return count;6225}6226 6227/**6228 * sysfs_ctlreg_read - Read method for reading from ctlreg6229 * @filp: open sysfs file6230 * @kobj: kernel kobject that contains the kernel class device.6231 * @bin_attr: kernel attributes passed to us.6232 * @buf: if successful contains the data from the adapter IOREG space.6233 * @off: offset into buffer to beginning of data.6234 * @count: bytes to transfer.6235 *6236 * Description:6237 * Accessed via /sys/class/scsi_host/hostxxx/ctlreg.6238 * Uses the adapter io control registers to read data into buf.6239 *6240 * Returns:6241 * -ERANGE off and count combo out of range6242 * -EINVAL off, count or buff address invalid6243 * value of count, buf contents read6244 **/6245static ssize_t6246sysfs_ctlreg_read(struct file *filp, struct kobject *kobj,6247 struct bin_attribute *bin_attr,6248 char *buf, loff_t off, size_t count)6249{6250 size_t buf_off;6251 uint32_t * tmp_ptr;6252 struct device *dev = container_of(kobj, struct device, kobj);6253 struct Scsi_Host *shost = class_to_shost(dev);6254 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;6255 struct lpfc_hba *phba = vport->phba;6256 6257 if (phba->sli_rev >= LPFC_SLI_REV4)6258 return -EPERM;6259 6260 if (off > FF_REG_AREA_SIZE)6261 return -ERANGE;6262 6263 if ((off + count) > FF_REG_AREA_SIZE)6264 count = FF_REG_AREA_SIZE - off;6265 6266 if (count == 0) return 0;6267 6268 if (off % 4 || count % 4 || (unsigned long)buf % 4)6269 return -EINVAL;6270 6271 spin_lock_irq(&phba->hbalock);6272 6273 for (buf_off = 0; buf_off < count; buf_off += sizeof(uint32_t)) {6274 tmp_ptr = (uint32_t *)(buf + buf_off);6275 *tmp_ptr = readl(phba->ctrl_regs_memmap_p + off + buf_off);6276 }6277 6278 spin_unlock_irq(&phba->hbalock);6279 6280 return count;6281}6282 6283static struct bin_attribute sysfs_ctlreg_attr = {6284 .attr = {6285 .name = "ctlreg",6286 .mode = S_IRUSR | S_IWUSR,6287 },6288 .size = 256,6289 .read = sysfs_ctlreg_read,6290 .write = sysfs_ctlreg_write,6291};6292 6293/**6294 * sysfs_mbox_write - Write method for writing information via mbox6295 * @filp: open sysfs file6296 * @kobj: kernel kobject that contains the kernel class device.6297 * @bin_attr: kernel attributes passed to us.6298 * @buf: contains the data to be written to sysfs mbox.6299 * @off: offset into buffer to beginning of data.6300 * @count: bytes to transfer.6301 *6302 * Description:6303 * Deprecated function. All mailbox access from user space is performed via the6304 * bsg interface.6305 *6306 * Returns:6307 * -EPERM operation not permitted6308 **/6309static ssize_t6310sysfs_mbox_write(struct file *filp, struct kobject *kobj,6311 struct bin_attribute *bin_attr,6312 char *buf, loff_t off, size_t count)6313{6314 return -EPERM;6315}6316 6317/**6318 * sysfs_mbox_read - Read method for reading information via mbox6319 * @filp: open sysfs file6320 * @kobj: kernel kobject that contains the kernel class device.6321 * @bin_attr: kernel attributes passed to us.6322 * @buf: contains the data to be read from sysfs mbox.6323 * @off: offset into buffer to beginning of data.6324 * @count: bytes to transfer.6325 *6326 * Description:6327 * Deprecated function. All mailbox access from user space is performed via the6328 * bsg interface.6329 *6330 * Returns:6331 * -EPERM operation not permitted6332 **/6333static ssize_t6334sysfs_mbox_read(struct file *filp, struct kobject *kobj,6335 struct bin_attribute *bin_attr,6336 char *buf, loff_t off, size_t count)6337{6338 return -EPERM;6339}6340 6341static struct bin_attribute sysfs_mbox_attr = {6342 .attr = {6343 .name = "mbox",6344 .mode = S_IRUSR | S_IWUSR,6345 },6346 .size = MAILBOX_SYSFS_MAX,6347 .read = sysfs_mbox_read,6348 .write = sysfs_mbox_write,6349};6350 6351/**6352 * lpfc_alloc_sysfs_attr - Creates the ctlreg and mbox entries6353 * @vport: address of lpfc vport structure.6354 *6355 * Return codes:6356 * zero on success6357 * error return code from sysfs_create_bin_file()6358 **/6359int6360lpfc_alloc_sysfs_attr(struct lpfc_vport *vport)6361{6362 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);6363 int error;6364 6365 /* Virtual ports do not need ctrl_reg and mbox */6366 if (vport->port_type == LPFC_NPIV_PORT)6367 return 0;6368 6369 error = sysfs_create_bin_file(&shost->shost_dev.kobj,6370 &sysfs_ctlreg_attr);6371 if (error)6372 goto out;6373 6374 error = sysfs_create_bin_file(&shost->shost_dev.kobj,6375 &sysfs_mbox_attr);6376 if (error)6377 goto out_remove_ctlreg_attr;6378 6379 return 0;6380out_remove_ctlreg_attr:6381 sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr);6382out:6383 return error;6384}6385 6386/**6387 * lpfc_free_sysfs_attr - Removes the ctlreg and mbox entries6388 * @vport: address of lpfc vport structure.6389 **/6390void6391lpfc_free_sysfs_attr(struct lpfc_vport *vport)6392{6393 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);6394 6395 /* Virtual ports do not need ctrl_reg and mbox */6396 if (vport->port_type == LPFC_NPIV_PORT)6397 return;6398 sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_mbox_attr);6399 sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr);6400}6401 6402/*6403 * Dynamic FC Host Attributes Support6404 */6405 6406/**6407 * lpfc_get_host_symbolic_name - Copy symbolic name into the scsi host6408 * @shost: kernel scsi host pointer.6409 **/6410static void6411lpfc_get_host_symbolic_name(struct Scsi_Host *shost)6412{6413 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;6414 6415 lpfc_vport_symbolic_node_name(vport, fc_host_symbolic_name(shost),6416 sizeof fc_host_symbolic_name(shost));6417}6418 6419/**6420 * lpfc_get_host_port_id - Copy the vport DID into the scsi host port id6421 * @shost: kernel scsi host pointer.6422 **/6423static void6424lpfc_get_host_port_id(struct Scsi_Host *shost)6425{6426 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;6427 6428 /* note: fc_myDID already in cpu endianness */6429 fc_host_port_id(shost) = vport->fc_myDID;6430}6431 6432/**6433 * lpfc_get_host_port_type - Set the value of the scsi host port type6434 * @shost: kernel scsi host pointer.6435 **/6436static void6437lpfc_get_host_port_type(struct Scsi_Host *shost)6438{6439 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;6440 struct lpfc_hba *phba = vport->phba;6441 6442 if (vport->port_type == LPFC_NPIV_PORT) {6443 fc_host_port_type(shost) = FC_PORTTYPE_NPIV;6444 } else if (lpfc_is_link_up(phba)) {6445 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {6446 if (test_bit(FC_PUBLIC_LOOP, &vport->fc_flag))6447 fc_host_port_type(shost) = FC_PORTTYPE_NLPORT;6448 else6449 fc_host_port_type(shost) = FC_PORTTYPE_LPORT;6450 } else {6451 if (test_bit(FC_FABRIC, &vport->fc_flag))6452 fc_host_port_type(shost) = FC_PORTTYPE_NPORT;6453 else6454 fc_host_port_type(shost) = FC_PORTTYPE_PTP;6455 }6456 } else6457 fc_host_port_type(shost) = FC_PORTTYPE_UNKNOWN;6458}6459 6460/**6461 * lpfc_get_host_port_state - Set the value of the scsi host port state6462 * @shost: kernel scsi host pointer.6463 **/6464static void6465lpfc_get_host_port_state(struct Scsi_Host *shost)6466{6467 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;6468 struct lpfc_hba *phba = vport->phba;6469 6470 if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag))6471 fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE;6472 else {6473 switch (phba->link_state) {6474 case LPFC_LINK_UNKNOWN:6475 case LPFC_LINK_DOWN:6476 fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN;6477 break;6478 case LPFC_LINK_UP:6479 case LPFC_CLEAR_LA:6480 case LPFC_HBA_READY:6481 /* Links up, reports port state accordingly */6482 if (vport->port_state < LPFC_VPORT_READY)6483 fc_host_port_state(shost) =6484 FC_PORTSTATE_BYPASSED;6485 else6486 fc_host_port_state(shost) =6487 FC_PORTSTATE_ONLINE;6488 break;6489 case LPFC_HBA_ERROR:6490 fc_host_port_state(shost) = FC_PORTSTATE_ERROR;6491 break;6492 default:6493 fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;6494 break;6495 }6496 }6497}6498 6499/**6500 * lpfc_get_host_speed - Set the value of the scsi host speed6501 * @shost: kernel scsi host pointer.6502 **/6503static void6504lpfc_get_host_speed(struct Scsi_Host *shost)6505{6506 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;6507 struct lpfc_hba *phba = vport->phba;6508 6509 if ((lpfc_is_link_up(phba)) &&6510 !test_bit(HBA_FCOE_MODE, &phba->hba_flag)) {6511 switch(phba->fc_linkspeed) {6512 case LPFC_LINK_SPEED_1GHZ:6513 fc_host_speed(shost) = FC_PORTSPEED_1GBIT;6514 break;6515 case LPFC_LINK_SPEED_2GHZ:6516 fc_host_speed(shost) = FC_PORTSPEED_2GBIT;6517 break;6518 case LPFC_LINK_SPEED_4GHZ:6519 fc_host_speed(shost) = FC_PORTSPEED_4GBIT;6520 break;6521 case LPFC_LINK_SPEED_8GHZ:6522 fc_host_speed(shost) = FC_PORTSPEED_8GBIT;6523 break;6524 case LPFC_LINK_SPEED_10GHZ:6525 fc_host_speed(shost) = FC_PORTSPEED_10GBIT;6526 break;6527 case LPFC_LINK_SPEED_16GHZ:6528 fc_host_speed(shost) = FC_PORTSPEED_16GBIT;6529 break;6530 case LPFC_LINK_SPEED_32GHZ:6531 fc_host_speed(shost) = FC_PORTSPEED_32GBIT;6532 break;6533 case LPFC_LINK_SPEED_64GHZ:6534 fc_host_speed(shost) = FC_PORTSPEED_64GBIT;6535 break;6536 case LPFC_LINK_SPEED_128GHZ:6537 fc_host_speed(shost) = FC_PORTSPEED_128GBIT;6538 break;6539 case LPFC_LINK_SPEED_256GHZ:6540 fc_host_speed(shost) = FC_PORTSPEED_256GBIT;6541 break;6542 default:6543 fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;6544 break;6545 }6546 } else if (lpfc_is_link_up(phba) &&6547 test_bit(HBA_FCOE_MODE, &phba->hba_flag)) {6548 switch (phba->fc_linkspeed) {6549 case LPFC_ASYNC_LINK_SPEED_1GBPS:6550 fc_host_speed(shost) = FC_PORTSPEED_1GBIT;6551 break;6552 case LPFC_ASYNC_LINK_SPEED_10GBPS:6553 fc_host_speed(shost) = FC_PORTSPEED_10GBIT;6554 break;6555 case LPFC_ASYNC_LINK_SPEED_20GBPS:6556 fc_host_speed(shost) = FC_PORTSPEED_20GBIT;6557 break;6558 case LPFC_ASYNC_LINK_SPEED_25GBPS:6559 fc_host_speed(shost) = FC_PORTSPEED_25GBIT;6560 break;6561 case LPFC_ASYNC_LINK_SPEED_40GBPS:6562 fc_host_speed(shost) = FC_PORTSPEED_40GBIT;6563 break;6564 case LPFC_ASYNC_LINK_SPEED_100GBPS:6565 fc_host_speed(shost) = FC_PORTSPEED_100GBIT;6566 break;6567 default:6568 fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;6569 break;6570 }6571 } else6572 fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;6573}6574 6575/**6576 * lpfc_get_host_fabric_name - Set the value of the scsi host fabric name6577 * @shost: kernel scsi host pointer.6578 **/6579static void6580lpfc_get_host_fabric_name (struct Scsi_Host *shost)6581{6582 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;6583 struct lpfc_hba *phba = vport->phba;6584 u64 node_name;6585 6586 if (vport->port_state > LPFC_FLOGI &&6587 (test_bit(FC_FABRIC, &vport->fc_flag) ||6588 (phba->fc_topology == LPFC_TOPOLOGY_LOOP &&6589 test_bit(FC_PUBLIC_LOOP, &vport->fc_flag))))6590 node_name = wwn_to_u64(phba->fc_fabparam.nodeName.u.wwn);6591 else6592 /* fabric is local port if there is no F/FL_Port */6593 node_name = 0;6594 6595 fc_host_fabric_name(shost) = node_name;6596}6597 6598/**6599 * lpfc_get_stats - Return statistical information about the adapter6600 * @shost: kernel scsi host pointer.6601 *6602 * Notes:6603 * NULL on error for link down, no mbox pool, sli2 active,6604 * management not allowed, memory allocation error, or mbox error.6605 *6606 * Returns:6607 * NULL for error6608 * address of the adapter host statistics6609 **/6610static struct fc_host_statistics *6611lpfc_get_stats(struct Scsi_Host *shost)6612{6613 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;6614 struct lpfc_hba *phba = vport->phba;6615 struct lpfc_sli *psli = &phba->sli;6616 struct fc_host_statistics *hs = &phba->link_stats;6617 struct lpfc_lnk_stat * lso = &psli->lnk_stat_offsets;6618 LPFC_MBOXQ_t *pmboxq;6619 MAILBOX_t *pmb;6620 int rc = 0;6621 6622 /*6623 * prevent udev from issuing mailbox commands until the port is6624 * configured.6625 */6626 if (phba->link_state < LPFC_LINK_DOWN ||6627 !phba->mbox_mem_pool ||6628 (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)6629 return NULL;6630 6631 if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)6632 return NULL;6633 6634 pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);6635 if (!pmboxq)6636 return NULL;6637 memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));6638 6639 pmb = &pmboxq->u.mb;6640 pmb->mbxCommand = MBX_READ_STATUS;6641 pmb->mbxOwner = OWN_HOST;6642 pmboxq->ctx_buf = NULL;6643 pmboxq->vport = vport;6644 6645 if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag)) {6646 rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);6647 if (rc != MBX_SUCCESS) {6648 mempool_free(pmboxq, phba->mbox_mem_pool);6649 return NULL;6650 }6651 } else {6652 rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);6653 if (rc != MBX_SUCCESS) {6654 if (rc != MBX_TIMEOUT)6655 mempool_free(pmboxq, phba->mbox_mem_pool);6656 return NULL;6657 }6658 }6659 6660 memset(hs, 0, sizeof (struct fc_host_statistics));6661 6662 hs->tx_frames = pmb->un.varRdStatus.xmitFrameCnt;6663 hs->rx_frames = pmb->un.varRdStatus.rcvFrameCnt;6664 6665 /*6666 * The MBX_READ_STATUS returns tx_k_bytes which has to be6667 * converted to words.6668 *6669 * Check if extended byte flag is set, to know when to collect upper6670 * bits of 64 bit wide statistics counter.6671 */6672 if (pmb->un.varRdStatus.xkb & RD_ST_XKB) {6673 hs->tx_words = (u64)6674 ((((u64)(pmb->un.varRdStatus.xmit_xkb &6675 RD_ST_XMIT_XKB_MASK) << 32) |6676 (u64)pmb->un.varRdStatus.xmitByteCnt) *6677 (u64)256);6678 hs->rx_words = (u64)6679 ((((u64)(pmb->un.varRdStatus.rcv_xkb &6680 RD_ST_RCV_XKB_MASK) << 32) |6681 (u64)pmb->un.varRdStatus.rcvByteCnt) *6682 (u64)256);6683 } else {6684 hs->tx_words = (uint64_t)6685 ((uint64_t)pmb->un.varRdStatus.xmitByteCnt6686 * (uint64_t)256);6687 hs->rx_words = (uint64_t)6688 ((uint64_t)pmb->un.varRdStatus.rcvByteCnt6689 * (uint64_t)256);6690 }6691 6692 memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));6693 pmb->mbxCommand = MBX_READ_LNK_STAT;6694 pmb->mbxOwner = OWN_HOST;6695 pmboxq->ctx_buf = NULL;6696 pmboxq->vport = vport;6697 6698 if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag)) {6699 rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);6700 if (rc != MBX_SUCCESS) {6701 mempool_free(pmboxq, phba->mbox_mem_pool);6702 return NULL;6703 }6704 } else {6705 rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);6706 if (rc != MBX_SUCCESS) {6707 if (rc != MBX_TIMEOUT)6708 mempool_free(pmboxq, phba->mbox_mem_pool);6709 return NULL;6710 }6711 }6712 6713 hs->link_failure_count = pmb->un.varRdLnk.linkFailureCnt;6714 hs->loss_of_sync_count = pmb->un.varRdLnk.lossSyncCnt;6715 hs->loss_of_signal_count = pmb->un.varRdLnk.lossSignalCnt;6716 hs->prim_seq_protocol_err_count = pmb->un.varRdLnk.primSeqErrCnt;6717 hs->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord;6718 hs->invalid_crc_count = pmb->un.varRdLnk.crcCnt;6719 hs->error_frames = pmb->un.varRdLnk.crcCnt;6720 6721 hs->cn_sig_warn = atomic64_read(&phba->cgn_acqe_stat.warn);6722 hs->cn_sig_alarm = atomic64_read(&phba->cgn_acqe_stat.alarm);6723 6724 hs->link_failure_count -= lso->link_failure_count;6725 hs->loss_of_sync_count -= lso->loss_of_sync_count;6726 hs->loss_of_signal_count -= lso->loss_of_signal_count;6727 hs->prim_seq_protocol_err_count -= lso->prim_seq_protocol_err_count;6728 hs->invalid_tx_word_count -= lso->invalid_tx_word_count;6729 hs->invalid_crc_count -= lso->invalid_crc_count;6730 hs->error_frames -= lso->error_frames;6731 6732 if (test_bit(HBA_FCOE_MODE, &phba->hba_flag)) {6733 hs->lip_count = -1;6734 hs->nos_count = (phba->link_events >> 1);6735 hs->nos_count -= lso->link_events;6736 } else if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {6737 hs->lip_count = (phba->fc_eventTag >> 1);6738 hs->lip_count -= lso->link_events;6739 hs->nos_count = -1;6740 } else {6741 hs->lip_count = -1;6742 hs->nos_count = (phba->fc_eventTag >> 1);6743 hs->nos_count -= lso->link_events;6744 }6745 6746 hs->dumped_frames = -1;6747 6748 hs->seconds_since_last_reset = ktime_get_seconds() - psli->stats_start;6749 6750 mempool_free(pmboxq, phba->mbox_mem_pool);6751 6752 return hs;6753}6754 6755/**6756 * lpfc_reset_stats - Copy the adapter link stats information6757 * @shost: kernel scsi host pointer.6758 **/6759static void6760lpfc_reset_stats(struct Scsi_Host *shost)6761{6762 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;6763 struct lpfc_hba *phba = vport->phba;6764 struct lpfc_sli *psli = &phba->sli;6765 struct lpfc_lnk_stat *lso = &psli->lnk_stat_offsets;6766 LPFC_MBOXQ_t *pmboxq;6767 MAILBOX_t *pmb;6768 int rc = 0;6769 6770 if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)6771 return;6772 6773 pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);6774 if (!pmboxq)6775 return;6776 memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));6777 6778 pmb = &pmboxq->u.mb;6779 pmb->mbxCommand = MBX_READ_STATUS;6780 pmb->mbxOwner = OWN_HOST;6781 pmb->un.varWords[0] = 0x1; /* reset request */6782 pmboxq->ctx_buf = NULL;6783 pmboxq->vport = vport;6784 6785 if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag) ||6786 !(psli->sli_flag & LPFC_SLI_ACTIVE)) {6787 rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);6788 if (rc != MBX_SUCCESS) {6789 mempool_free(pmboxq, phba->mbox_mem_pool);6790 return;6791 }6792 } else {6793 rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);6794 if (rc != MBX_SUCCESS) {6795 if (rc != MBX_TIMEOUT)6796 mempool_free(pmboxq, phba->mbox_mem_pool);6797 return;6798 }6799 }6800 6801 memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));6802 pmb->mbxCommand = MBX_READ_LNK_STAT;6803 pmb->mbxOwner = OWN_HOST;6804 pmboxq->ctx_buf = NULL;6805 pmboxq->vport = vport;6806 6807 if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag) ||6808 !(psli->sli_flag & LPFC_SLI_ACTIVE)) {6809 rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);6810 if (rc != MBX_SUCCESS) {6811 mempool_free(pmboxq, phba->mbox_mem_pool);6812 return;6813 }6814 } else {6815 rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);6816 if (rc != MBX_SUCCESS) {6817 if (rc != MBX_TIMEOUT)6818 mempool_free(pmboxq, phba->mbox_mem_pool);6819 return;6820 }6821 }6822 6823 lso->link_failure_count = pmb->un.varRdLnk.linkFailureCnt;6824 lso->loss_of_sync_count = pmb->un.varRdLnk.lossSyncCnt;6825 lso->loss_of_signal_count = pmb->un.varRdLnk.lossSignalCnt;6826 lso->prim_seq_protocol_err_count = pmb->un.varRdLnk.primSeqErrCnt;6827 lso->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord;6828 lso->invalid_crc_count = pmb->un.varRdLnk.crcCnt;6829 lso->error_frames = pmb->un.varRdLnk.crcCnt;6830 if (test_bit(HBA_FCOE_MODE, &phba->hba_flag))6831 lso->link_events = (phba->link_events >> 1);6832 else6833 lso->link_events = (phba->fc_eventTag >> 1);6834 6835 atomic64_set(&phba->cgn_acqe_stat.warn, 0);6836 atomic64_set(&phba->cgn_acqe_stat.alarm, 0);6837 6838 memset(&shost_to_fc_host(shost)->fpin_stats, 0,6839 sizeof(shost_to_fc_host(shost)->fpin_stats));6840 6841 psli->stats_start = ktime_get_seconds();6842 6843 mempool_free(pmboxq, phba->mbox_mem_pool);6844 6845 return;6846}6847 6848/*6849 * The LPFC driver treats linkdown handling as target loss events so there6850 * are no sysfs handlers for link_down_tmo.6851 */6852 6853/**6854 * lpfc_get_node_by_target - Return the nodelist for a target6855 * @starget: kernel scsi target pointer.6856 *6857 * Returns:6858 * address of the node list if found6859 * NULL target not found6860 **/6861static struct lpfc_nodelist *6862lpfc_get_node_by_target(struct scsi_target *starget)6863{6864 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);6865 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;6866 struct lpfc_nodelist *ndlp;6867 unsigned long iflags;6868 6869 spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags);6870 /* Search for this, mapped, target ID */6871 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {6872 if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&6873 starget->id == ndlp->nlp_sid) {6874 spin_unlock_irqrestore(&vport->fc_nodes_list_lock,6875 iflags);6876 return ndlp;6877 }6878 }6879 spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags);6880 return NULL;6881}6882 6883/**6884 * lpfc_get_starget_port_id - Set the target port id to the ndlp DID or -16885 * @starget: kernel scsi target pointer.6886 **/6887static void6888lpfc_get_starget_port_id(struct scsi_target *starget)6889{6890 struct lpfc_nodelist *ndlp = lpfc_get_node_by_target(starget);6891 6892 fc_starget_port_id(starget) = ndlp ? ndlp->nlp_DID : -1;6893}6894 6895/**6896 * lpfc_get_starget_node_name - Set the target node name6897 * @starget: kernel scsi target pointer.6898 *6899 * Description: Set the target node name to the ndlp node name wwn or zero.6900 **/6901static void6902lpfc_get_starget_node_name(struct scsi_target *starget)6903{6904 struct lpfc_nodelist *ndlp = lpfc_get_node_by_target(starget);6905 6906 fc_starget_node_name(starget) =6907 ndlp ? wwn_to_u64(ndlp->nlp_nodename.u.wwn) : 0;6908}6909 6910/**6911 * lpfc_get_starget_port_name - Set the target port name6912 * @starget: kernel scsi target pointer.6913 *6914 * Description: set the target port name to the ndlp port name wwn or zero.6915 **/6916static void6917lpfc_get_starget_port_name(struct scsi_target *starget)6918{6919 struct lpfc_nodelist *ndlp = lpfc_get_node_by_target(starget);6920 6921 fc_starget_port_name(starget) =6922 ndlp ? wwn_to_u64(ndlp->nlp_portname.u.wwn) : 0;6923}6924 6925/**6926 * lpfc_set_rport_loss_tmo - Set the rport dev loss tmo6927 * @rport: fc rport address.6928 * @timeout: new value for dev loss tmo.6929 *6930 * Description:6931 * If timeout is non zero set the dev_loss_tmo to timeout, else set6932 * dev_loss_tmo to one.6933 **/6934static void6935lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)6936{6937 struct lpfc_rport_data *rdata = rport->dd_data;6938 struct lpfc_nodelist *ndlp = rdata->pnode;6939#if (IS_ENABLED(CONFIG_NVME_FC))6940 struct lpfc_nvme_rport *nrport = NULL;6941#endif6942 6943 if (timeout)6944 rport->dev_loss_tmo = timeout;6945 else6946 rport->dev_loss_tmo = 1;6947 6948 if (!ndlp) {6949 dev_info(&rport->dev, "Cannot find remote node to "6950 "set rport dev loss tmo, port_id x%x\n",6951 rport->port_id);6952 return;6953 }6954 6955#if (IS_ENABLED(CONFIG_NVME_FC))6956 nrport = lpfc_ndlp_get_nrport(ndlp);6957 6958 if (nrport && nrport->remoteport)6959 nvme_fc_set_remoteport_devloss(nrport->remoteport,6960 rport->dev_loss_tmo);6961#endif6962}6963 6964/*6965 * lpfc_rport_show_function - Return rport target information6966 *6967 * Description:6968 * Macro that uses field to generate a function with the name lpfc_show_rport_6969 *6970 * lpfc_show_rport_##field: returns the bytes formatted in buf6971 * @cdev: class converted to an fc_rport.6972 * @buf: on return contains the target_field or zero.6973 *6974 * Returns: size of formatted string.6975 **/6976#define lpfc_rport_show_function(field, format_string, sz, cast) \6977static ssize_t \6978lpfc_show_rport_##field (struct device *dev, \6979 struct device_attribute *attr, \6980 char *buf) \6981{ \6982 struct fc_rport *rport = transport_class_to_rport(dev); \6983 struct lpfc_rport_data *rdata = rport->hostdata; \6984 return scnprintf(buf, sz, format_string, \6985 (rdata->target) ? cast rdata->target->field : 0); \6986}6987 6988#define lpfc_rport_rd_attr(field, format_string, sz) \6989 lpfc_rport_show_function(field, format_string, sz, ) \6990static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL)6991 6992/**6993 * lpfc_set_vport_symbolic_name - Set the vport's symbolic name6994 * @fc_vport: The fc_vport who's symbolic name has been changed.6995 *6996 * Description:6997 * This function is called by the transport after the @fc_vport's symbolic name6998 * has been changed. This function re-registers the symbolic name with the6999 * switch to propagate the change into the fabric if the vport is active.7000 **/7001static void7002lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport)7003{7004 struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;7005 7006 if (vport->port_state == LPFC_VPORT_READY)7007 lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0);7008}7009 7010/**7011 * lpfc_hba_log_verbose_init - Set hba's log verbose level7012 * @phba: Pointer to lpfc_hba struct.7013 * @verbose: Verbose level to set.7014 *7015 * This function is called by the lpfc_get_cfgparam() routine to set the7016 * module lpfc_log_verbose into the @phba cfg_log_verbose for use with7017 * log message according to the module's lpfc_log_verbose parameter setting7018 * before hba port or vport created.7019 **/7020static void7021lpfc_hba_log_verbose_init(struct lpfc_hba *phba, uint32_t verbose)7022{7023 phba->cfg_log_verbose = verbose;7024}7025 7026struct fc_function_template lpfc_transport_functions = {7027 /* fixed attributes the driver supports */7028 .show_host_node_name = 1,7029 .show_host_port_name = 1,7030 .show_host_supported_classes = 1,7031 .show_host_supported_fc4s = 1,7032 .show_host_supported_speeds = 1,7033 .show_host_maxframe_size = 1,7034 7035 .get_host_symbolic_name = lpfc_get_host_symbolic_name,7036 .show_host_symbolic_name = 1,7037 7038 /* dynamic attributes the driver supports */7039 .get_host_port_id = lpfc_get_host_port_id,7040 .show_host_port_id = 1,7041 7042 .get_host_port_type = lpfc_get_host_port_type,7043 .show_host_port_type = 1,7044 7045 .get_host_port_state = lpfc_get_host_port_state,7046 .show_host_port_state = 1,7047 7048 /* active_fc4s is shown but doesn't change (thus no get function) */7049 .show_host_active_fc4s = 1,7050 7051 .get_host_speed = lpfc_get_host_speed,7052 .show_host_speed = 1,7053 7054 .get_host_fabric_name = lpfc_get_host_fabric_name,7055 .show_host_fabric_name = 1,7056 7057 /*7058 * The LPFC driver treats linkdown handling as target loss events7059 * so there are no sysfs handlers for link_down_tmo.7060 */7061 7062 .get_fc_host_stats = lpfc_get_stats,7063 .reset_fc_host_stats = lpfc_reset_stats,7064 7065 .dd_fcrport_size = sizeof(struct lpfc_rport_data),7066 .show_rport_maxframe_size = 1,7067 .show_rport_supported_classes = 1,7068 7069 .set_rport_dev_loss_tmo = lpfc_set_rport_loss_tmo,7070 .show_rport_dev_loss_tmo = 1,7071 7072 .get_starget_port_id = lpfc_get_starget_port_id,7073 .show_starget_port_id = 1,7074 7075 .get_starget_node_name = lpfc_get_starget_node_name,7076 .show_starget_node_name = 1,7077 7078 .get_starget_port_name = lpfc_get_starget_port_name,7079 .show_starget_port_name = 1,7080 7081 .issue_fc_host_lip = lpfc_issue_lip,7082 .dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk,7083 .terminate_rport_io = lpfc_terminate_rport_io,7084 7085 .dd_fcvport_size = sizeof(struct lpfc_vport *),7086 7087 .vport_disable = lpfc_vport_disable,7088 7089 .set_vport_symbolic_name = lpfc_set_vport_symbolic_name,7090 7091 .bsg_request = lpfc_bsg_request,7092 .bsg_timeout = lpfc_bsg_timeout,7093};7094 7095struct fc_function_template lpfc_vport_transport_functions = {7096 /* fixed attributes the driver supports */7097 .show_host_node_name = 1,7098 .show_host_port_name = 1,7099 .show_host_supported_classes = 1,7100 .show_host_supported_fc4s = 1,7101 .show_host_supported_speeds = 1,7102 .show_host_maxframe_size = 1,7103 7104 .get_host_symbolic_name = lpfc_get_host_symbolic_name,7105 .show_host_symbolic_name = 1,7106 7107 /* dynamic attributes the driver supports */7108 .get_host_port_id = lpfc_get_host_port_id,7109 .show_host_port_id = 1,7110 7111 .get_host_port_type = lpfc_get_host_port_type,7112 .show_host_port_type = 1,7113 7114 .get_host_port_state = lpfc_get_host_port_state,7115 .show_host_port_state = 1,7116 7117 /* active_fc4s is shown but doesn't change (thus no get function) */7118 .show_host_active_fc4s = 1,7119 7120 .get_host_speed = lpfc_get_host_speed,7121 .show_host_speed = 1,7122 7123 .get_host_fabric_name = lpfc_get_host_fabric_name,7124 .show_host_fabric_name = 1,7125 7126 /*7127 * The LPFC driver treats linkdown handling as target loss events7128 * so there are no sysfs handlers for link_down_tmo.7129 */7130 7131 .get_fc_host_stats = lpfc_get_stats,7132 .reset_fc_host_stats = lpfc_reset_stats,7133 7134 .dd_fcrport_size = sizeof(struct lpfc_rport_data),7135 .show_rport_maxframe_size = 1,7136 .show_rport_supported_classes = 1,7137 7138 .set_rport_dev_loss_tmo = lpfc_set_rport_loss_tmo,7139 .show_rport_dev_loss_tmo = 1,7140 7141 .get_starget_port_id = lpfc_get_starget_port_id,7142 .show_starget_port_id = 1,7143 7144 .get_starget_node_name = lpfc_get_starget_node_name,7145 .show_starget_node_name = 1,7146 7147 .get_starget_port_name = lpfc_get_starget_port_name,7148 .show_starget_port_name = 1,7149 7150 .dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk,7151 .terminate_rport_io = lpfc_terminate_rport_io,7152 7153 .vport_disable = lpfc_vport_disable,7154 7155 .set_vport_symbolic_name = lpfc_set_vport_symbolic_name,7156};7157 7158/**7159 * lpfc_get_hba_function_mode - Used to determine the HBA function in FCoE7160 * Mode7161 * @phba: lpfc_hba pointer.7162 **/7163static void7164lpfc_get_hba_function_mode(struct lpfc_hba *phba)7165{7166 /* If the adapter supports FCoE mode */7167 switch (phba->pcidev->device) {7168 case PCI_DEVICE_ID_SKYHAWK:7169 case PCI_DEVICE_ID_SKYHAWK_VF:7170 case PCI_DEVICE_ID_LANCER_FCOE:7171 case PCI_DEVICE_ID_LANCER_FCOE_VF:7172 case PCI_DEVICE_ID_ZEPHYR_DCSP:7173 case PCI_DEVICE_ID_TIGERSHARK:7174 case PCI_DEVICE_ID_TOMCAT:7175 set_bit(HBA_FCOE_MODE, &phba->hba_flag);7176 break;7177 default:7178 /* for others, clear the flag */7179 clear_bit(HBA_FCOE_MODE, &phba->hba_flag);7180 }7181}7182 7183/**7184 * lpfc_get_cfgparam - Used during probe_one to init the adapter structure7185 * @phba: lpfc_hba pointer.7186 **/7187void7188lpfc_get_cfgparam(struct lpfc_hba *phba)7189{7190 lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);7191 lpfc_fcp_io_sched_init(phba, lpfc_fcp_io_sched);7192 lpfc_ns_query_init(phba, lpfc_ns_query);7193 lpfc_fcp2_no_tgt_reset_init(phba, lpfc_fcp2_no_tgt_reset);7194 lpfc_cr_delay_init(phba, lpfc_cr_delay);7195 lpfc_cr_count_init(phba, lpfc_cr_count);7196 lpfc_multi_ring_support_init(phba, lpfc_multi_ring_support);7197 lpfc_multi_ring_rctl_init(phba, lpfc_multi_ring_rctl);7198 lpfc_multi_ring_type_init(phba, lpfc_multi_ring_type);7199 lpfc_ack0_init(phba, lpfc_ack0);7200 lpfc_xri_rebalancing_init(phba, lpfc_xri_rebalancing);7201 lpfc_topology_init(phba, lpfc_topology);7202 lpfc_link_speed_init(phba, lpfc_link_speed);7203 lpfc_poll_tmo_init(phba, lpfc_poll_tmo);7204 lpfc_task_mgmt_tmo_init(phba, lpfc_task_mgmt_tmo);7205 lpfc_enable_npiv_init(phba, lpfc_enable_npiv);7206 lpfc_fcf_failover_policy_init(phba, lpfc_fcf_failover_policy);7207 lpfc_enable_rrq_init(phba, lpfc_enable_rrq);7208 lpfc_fcp_wait_abts_rsp_init(phba, lpfc_fcp_wait_abts_rsp);7209 lpfc_fdmi_on_init(phba, lpfc_fdmi_on);7210 lpfc_enable_SmartSAN_init(phba, lpfc_enable_SmartSAN);7211 lpfc_use_msi_init(phba, lpfc_use_msi);7212 lpfc_nvme_oas_init(phba, lpfc_nvme_oas);7213 lpfc_nvme_embed_cmd_init(phba, lpfc_nvme_embed_cmd);7214 lpfc_fcp_imax_init(phba, lpfc_fcp_imax);7215 lpfc_force_rscn_init(phba, lpfc_force_rscn);7216 lpfc_cq_poll_threshold_init(phba, lpfc_cq_poll_threshold);7217 lpfc_cq_max_proc_limit_init(phba, lpfc_cq_max_proc_limit);7218 lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map);7219 lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);7220 lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);7221 7222 lpfc_EnableXLane_init(phba, lpfc_EnableXLane);7223 /* VMID Inits */7224 lpfc_max_vmid_init(phba, lpfc_max_vmid);7225 lpfc_vmid_inactivity_timeout_init(phba, lpfc_vmid_inactivity_timeout);7226 lpfc_vmid_app_header_init(phba, lpfc_vmid_app_header);7227 lpfc_vmid_priority_tagging_init(phba, lpfc_vmid_priority_tagging);7228 if (phba->sli_rev != LPFC_SLI_REV4)7229 phba->cfg_EnableXLane = 0;7230 lpfc_XLanePriority_init(phba, lpfc_XLanePriority);7231 7232 memset(phba->cfg_oas_tgt_wwpn, 0, (8 * sizeof(uint8_t)));7233 memset(phba->cfg_oas_vpt_wwpn, 0, (8 * sizeof(uint8_t)));7234 phba->cfg_oas_lun_state = 0;7235 phba->cfg_oas_lun_status = 0;7236 phba->cfg_oas_flags = 0;7237 phba->cfg_oas_priority = 0;7238 lpfc_enable_bg_init(phba, lpfc_enable_bg);7239 lpfc_prot_mask_init(phba, lpfc_prot_mask);7240 lpfc_prot_guard_init(phba, lpfc_prot_guard);7241 if (phba->sli_rev == LPFC_SLI_REV4)7242 phba->cfg_poll = 0;7243 else7244 phba->cfg_poll = lpfc_poll;7245 7246 /* Get the function mode */7247 lpfc_get_hba_function_mode(phba);7248 7249 /* BlockGuard allowed for FC only. */7250 if (phba->cfg_enable_bg && test_bit(HBA_FCOE_MODE, &phba->hba_flag)) {7251 lpfc_printf_log(phba, KERN_INFO, LOG_INIT,7252 "0581 BlockGuard feature not supported\n");7253 /* If set, clear the BlockGuard support param */7254 phba->cfg_enable_bg = 0;7255 } else if (phba->cfg_enable_bg) {7256 phba->sli3_options |= LPFC_SLI3_BG_ENABLED;7257 }7258 7259 lpfc_suppress_rsp_init(phba, lpfc_suppress_rsp);7260 7261 lpfc_enable_fc4_type_init(phba, lpfc_enable_fc4_type);7262 lpfc_nvmet_mrq_init(phba, lpfc_nvmet_mrq);7263 lpfc_nvmet_mrq_post_init(phba, lpfc_nvmet_mrq_post);7264 7265 /* Initialize first burst. Target vs Initiator are different. */7266 lpfc_nvme_enable_fb_init(phba, lpfc_nvme_enable_fb);7267 lpfc_nvmet_fb_size_init(phba, lpfc_nvmet_fb_size);7268 lpfc_fcp_mq_threshold_init(phba, lpfc_fcp_mq_threshold);7269 lpfc_hdw_queue_init(phba, lpfc_hdw_queue);7270 lpfc_irq_chann_init(phba, lpfc_irq_chann);7271 lpfc_enable_bbcr_init(phba, lpfc_enable_bbcr);7272 lpfc_enable_dpp_init(phba, lpfc_enable_dpp);7273 lpfc_enable_mi_init(phba, lpfc_enable_mi);7274 7275 phba->cgn_p.cgn_param_mode = LPFC_CFG_OFF;7276 phba->cmf_active_mode = LPFC_CFG_OFF;7277 if (lpfc_fabric_cgn_frequency > EDC_CG_SIGFREQ_CNT_MAX ||7278 lpfc_fabric_cgn_frequency < EDC_CG_SIGFREQ_CNT_MIN)7279 lpfc_fabric_cgn_frequency = 100; /* 100 ms default */7280 7281 if (phba->sli_rev != LPFC_SLI_REV4) {7282 /* NVME only supported on SLI4 */7283 phba->nvmet_support = 0;7284 phba->cfg_nvmet_mrq = 0;7285 phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP;7286 phba->cfg_enable_bbcr = 0;7287 phba->cfg_xri_rebalancing = 0;7288 } else {7289 /* We MUST have FCP support */7290 if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP))7291 phba->cfg_enable_fc4_type |= LPFC_ENABLE_FCP;7292 }7293 7294 phba->cfg_auto_imax = (phba->cfg_fcp_imax) ? 0 : 1;7295 7296 phba->cfg_enable_pbde = 0;7297 7298 /* A value of 0 means use the number of CPUs found in the system */7299 if (phba->cfg_hdw_queue == 0)7300 phba->cfg_hdw_queue = phba->sli4_hba.num_present_cpu;7301 if (phba->cfg_irq_chann == 0)7302 phba->cfg_irq_chann = phba->sli4_hba.num_present_cpu;7303 if (phba->cfg_irq_chann > phba->cfg_hdw_queue &&7304 phba->sli_rev == LPFC_SLI_REV4)7305 phba->cfg_irq_chann = phba->cfg_hdw_queue;7306 7307 lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);7308 lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);7309 lpfc_sriov_nr_virtfn_init(phba, lpfc_sriov_nr_virtfn);7310 lpfc_request_firmware_upgrade_init(phba, lpfc_req_fw_upgrade);7311 lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up);7312 lpfc_delay_discovery_init(phba, lpfc_delay_discovery);7313 lpfc_sli_mode_init(phba, lpfc_sli_mode);7314 lpfc_enable_mds_diags_init(phba, lpfc_enable_mds_diags);7315 lpfc_ras_fwlog_buffsize_init(phba, lpfc_ras_fwlog_buffsize);7316 lpfc_ras_fwlog_level_init(phba, lpfc_ras_fwlog_level);7317 lpfc_ras_fwlog_func_init(phba, lpfc_ras_fwlog_func);7318 7319 return;7320}7321 7322/**7323 * lpfc_nvme_mod_param_dep - Adjust module parameter value based on7324 * dependencies between protocols and roles.7325 * @phba: lpfc_hba pointer.7326 **/7327void7328lpfc_nvme_mod_param_dep(struct lpfc_hba *phba)7329{7330 int logit = 0;7331 7332 if (phba->cfg_hdw_queue > phba->sli4_hba.num_present_cpu) {7333 phba->cfg_hdw_queue = phba->sli4_hba.num_present_cpu;7334 logit = 1;7335 }7336 if (phba->cfg_irq_chann > phba->sli4_hba.num_present_cpu) {7337 phba->cfg_irq_chann = phba->sli4_hba.num_present_cpu;7338 logit = 1;7339 }7340 if (phba->cfg_irq_chann > phba->cfg_hdw_queue) {7341 phba->cfg_irq_chann = phba->cfg_hdw_queue;7342 logit = 1;7343 }7344 if (logit)7345 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,7346 "2006 Reducing Queues - CPU limitation: "7347 "IRQ %d HDWQ %d\n",7348 phba->cfg_irq_chann,7349 phba->cfg_hdw_queue);7350 7351 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME &&7352 phba->nvmet_support) {7353 phba->cfg_enable_fc4_type &= ~LPFC_ENABLE_FCP;7354 7355 lpfc_printf_log(phba, KERN_INFO, LOG_NVME_DISC,7356 "6013 %s x%x fb_size x%x, fb_max x%x\n",7357 "NVME Target PRLI ACC enable_fb ",7358 phba->cfg_nvme_enable_fb,7359 phba->cfg_nvmet_fb_size,7360 LPFC_NVMET_FB_SZ_MAX);7361 7362 if (phba->cfg_nvme_enable_fb == 0)7363 phba->cfg_nvmet_fb_size = 0;7364 else {7365 if (phba->cfg_nvmet_fb_size > LPFC_NVMET_FB_SZ_MAX)7366 phba->cfg_nvmet_fb_size = LPFC_NVMET_FB_SZ_MAX;7367 }7368 7369 if (!phba->cfg_nvmet_mrq)7370 phba->cfg_nvmet_mrq = phba->cfg_hdw_queue;7371 7372 /* Adjust lpfc_nvmet_mrq to avoid running out of WQE slots */7373 if (phba->cfg_nvmet_mrq > phba->cfg_hdw_queue) {7374 phba->cfg_nvmet_mrq = phba->cfg_hdw_queue;7375 lpfc_printf_log(phba, KERN_ERR, LOG_NVME_DISC,7376 "6018 Adjust lpfc_nvmet_mrq to %d\n",7377 phba->cfg_nvmet_mrq);7378 }7379 if (phba->cfg_nvmet_mrq > LPFC_NVMET_MRQ_MAX)7380 phba->cfg_nvmet_mrq = LPFC_NVMET_MRQ_MAX;7381 7382 } else {7383 /* Not NVME Target mode. Turn off Target parameters. */7384 phba->nvmet_support = 0;7385 phba->cfg_nvmet_mrq = 0;7386 phba->cfg_nvmet_fb_size = 0;7387 }7388}7389 7390/**7391 * lpfc_get_vport_cfgparam - Used during port create, init the vport structure7392 * @vport: lpfc_vport pointer.7393 **/7394void7395lpfc_get_vport_cfgparam(struct lpfc_vport *vport)7396{7397 lpfc_log_verbose_init(vport, lpfc_log_verbose);7398 lpfc_lun_queue_depth_init(vport, lpfc_lun_queue_depth);7399 lpfc_tgt_queue_depth_init(vport, lpfc_tgt_queue_depth);7400 lpfc_devloss_tmo_init(vport, lpfc_devloss_tmo);7401 lpfc_nodev_tmo_init(vport, lpfc_nodev_tmo);7402 lpfc_peer_port_login_init(vport, lpfc_peer_port_login);7403 lpfc_restrict_login_init(vport, lpfc_restrict_login);7404 lpfc_fcp_class_init(vport, lpfc_fcp_class);7405 lpfc_use_adisc_init(vport, lpfc_use_adisc);7406 lpfc_first_burst_size_init(vport, lpfc_first_burst_size);7407 lpfc_max_scsicmpl_time_init(vport, lpfc_max_scsicmpl_time);7408 lpfc_discovery_threads_init(vport, lpfc_discovery_threads);7409 lpfc_max_luns_init(vport, lpfc_max_luns);7410 lpfc_scan_down_init(vport, lpfc_scan_down);7411 lpfc_enable_da_id_init(vport, lpfc_enable_da_id);7412 return;7413}7414