645 lines · c
1/*----------------------------------------------------------------*/2/*3 Qlogic linux driver - work in progress. No Warranty express or implied.4 Use at your own risk. Support Tort Reform so you won't have to read all5 these silly disclaimers.6 7 Copyright 1994, Tom Zerucha.8 tz@execpc.com9 10 Additional Code, and much appreciated help by11 Michael A. Griffith12 grif@cs.ucr.edu13 14 Thanks to Eric Youngdale and Dave Hinds for loadable module and PCMCIA15 help respectively, and for suffering through my foolishness during the16 debugging process.17 18 Reference Qlogic FAS408 Technical Manual, 53408-510-00A, May 10, 199419 (you can reference it, but it is incomplete and inaccurate in places)20 21 Version 0.46 1/30/97 - kernel 1.2.0+22 23 Functions as standalone, loadable, and PCMCIA driver, the latter from24 Dave Hinds' PCMCIA package.25 26 Cleaned up 26/10/2002 by Alan Cox <alan@lxorguk.ukuu.org.uk> as part of the 2.527 SCSI driver cleanup and audit. This driver still needs work on the28 following29 - Non terminating hardware waits30 - Some layering violations with its pcmcia stub31 32 Redistributable under terms of the GNU General Public License33 34 For the avoidance of doubt the "preferred form" of this code is one which35 is in an open non patent encumbered format. Where cryptographic key signing36 forms part of the process of creating an executable the information37 including keys needed to generate an equivalently functional executable38 are deemed to be part of the source code.39 40*/41 42#include <linux/module.h>43#include <linux/blkdev.h> /* to get disk capacity */44#include <linux/kernel.h>45#include <linux/string.h>46#include <linux/init.h>47#include <linux/interrupt.h>48#include <linux/ioport.h>49#include <linux/proc_fs.h>50#include <linux/unistd.h>51#include <linux/spinlock.h>52#include <linux/stat.h>53 54#include <asm/io.h>55#include <asm/irq.h>56#include <asm/dma.h>57 58#include <scsi/scsi.h>59#include <scsi/scsi_cmnd.h>60#include <scsi/scsi_device.h>61#include <scsi/scsi_eh.h>62#include <scsi/scsi_host.h>63#include <scsi/scsi_tcq.h>64#include "qlogicfas408.h"65 66/*----------------------------------------------------------------*/67static int qlcfg5 = (XTALFREQ << 5); /* 15625/512 */68static int qlcfg6 = SYNCXFRPD;69static int qlcfg7 = SYNCOFFST;70static int qlcfg8 = (SLOWCABLE << 7) | (QL_ENABLE_PARITY << 4);71static int qlcfg9 = ((XTALFREQ + 4) / 5);72static int qlcfgc = (FASTCLK << 3) | (FASTSCSI << 4);73 74/*----------------------------------------------------------------*/75 76/*----------------------------------------------------------------*/77/* local functions */78/*----------------------------------------------------------------*/79 80/* error recovery - reset everything */81 82static void ql_zap(struct qlogicfas408_priv *priv)83{84 int x;85 int qbase = priv->qbase;86 int int_type = priv->int_type;87 88 x = inb(qbase + 0xd);89 REG0;90 outb(3, qbase + 3); /* reset SCSI */91 outb(2, qbase + 3); /* reset chip */92 if (x & 0x80)93 REG1;94}95 96/*97 * Do a pseudo-dma tranfer98 */99 100static int ql_pdma(struct qlogicfas408_priv *priv, int phase, char *request,101 int reqlen)102{103 int j;104 int qbase = priv->qbase;105 j = 0;106 if (phase & 1) { /* in */107#if QL_TURBO_PDMA108 rtrc(4)109 /* empty fifo in large chunks */110 if (reqlen >= 128 && (inb(qbase + 8) & 2)) { /* full */111 insl(qbase + 4, request, 32);112 reqlen -= 128;113 request += 128;114 }115 while (reqlen >= 84 && !(j & 0xc0)) /* 2/3 */116 if ((j = inb(qbase + 8)) & 4)117 {118 insl(qbase + 4, request, 21);119 reqlen -= 84;120 request += 84;121 }122 if (reqlen >= 44 && (inb(qbase + 8) & 8)) { /* 1/3 */123 insl(qbase + 4, request, 11);124 reqlen -= 44;125 request += 44;126 }127#endif128 /* until both empty and int (or until reclen is 0) */129 rtrc(7)130 j = 0;131 while (reqlen && !((j & 0x10) && (j & 0xc0)))132 {133 /* while bytes to receive and not empty */134 j &= 0xc0;135 while (reqlen && !((j = inb(qbase + 8)) & 0x10))136 {137 *request++ = inb(qbase + 4);138 reqlen--;139 }140 if (j & 0x10)141 j = inb(qbase + 8);142 143 }144 } else { /* out */145#if QL_TURBO_PDMA146 rtrc(4)147 if (reqlen >= 128 && inb(qbase + 8) & 0x10) { /* empty */148 outsl(qbase + 4, request, 32);149 reqlen -= 128;150 request += 128;151 }152 while (reqlen >= 84 && !(j & 0xc0)) /* 1/3 */153 if (!((j = inb(qbase + 8)) & 8)) {154 outsl(qbase + 4, request, 21);155 reqlen -= 84;156 request += 84;157 }158 if (reqlen >= 40 && !(inb(qbase + 8) & 4)) { /* 2/3 */159 outsl(qbase + 4, request, 10);160 reqlen -= 40;161 request += 40;162 }163#endif164 /* until full and int (or until reclen is 0) */165 rtrc(7)166 j = 0;167 while (reqlen && !((j & 2) && (j & 0xc0))) {168 /* while bytes to send and not full */169 while (reqlen && !((j = inb(qbase + 8)) & 2))170 {171 outb(*request++, qbase + 4);172 reqlen--;173 }174 if (j & 2)175 j = inb(qbase + 8);176 }177 }178 /* maybe return reqlen */179 return inb(qbase + 8) & 0xc0;180}181 182/*183 * Wait for interrupt flag (polled - not real hardware interrupt)184 */185 186static int ql_wai(struct qlogicfas408_priv *priv)187{188 int k;189 int qbase = priv->qbase;190 unsigned long i;191 192 k = 0;193 i = jiffies + WATCHDOG;194 while (time_before(jiffies, i) && !priv->qabort &&195 !((k = inb(qbase + 4)) & 0xe0)) {196 barrier();197 cpu_relax();198 }199 if (time_after_eq(jiffies, i))200 return (DID_TIME_OUT);201 if (priv->qabort)202 return (priv->qabort == 1 ? DID_ABORT : DID_RESET);203 if (k & 0x60)204 ql_zap(priv);205 if (k & 0x20)206 return (DID_PARITY);207 if (k & 0x40)208 return (DID_ERROR);209 return 0;210}211 212/*213 * Initiate scsi command - queueing handler214 * caller must hold host lock215 */216 217static void ql_icmd(struct scsi_cmnd *cmd)218{219 struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);220 int qbase = priv->qbase;221 int int_type = priv->int_type;222 unsigned int i;223 224 priv->qabort = 0;225 226 REG0;227 /* clearing of interrupts and the fifo is needed */228 229 inb(qbase + 5); /* clear interrupts */230 if (inb(qbase + 5)) /* if still interrupting */231 outb(2, qbase + 3); /* reset chip */232 else if (inb(qbase + 7) & 0x1f)233 outb(1, qbase + 3); /* clear fifo */234 while (inb(qbase + 5)); /* clear ints */235 REG1;236 outb(1, qbase + 8); /* set for PIO pseudo DMA */237 outb(0, qbase + 0xb); /* disable ints */238 inb(qbase + 8); /* clear int bits */239 REG0;240 outb(0x40, qbase + 0xb); /* enable features */241 242 /* configurables */243 outb(qlcfgc, qbase + 0xc);244 /* config: no reset interrupt, (initiator) bus id */245 outb(0x40 | qlcfg8 | priv->qinitid, qbase + 8);246 outb(qlcfg7, qbase + 7);247 outb(qlcfg6, qbase + 6);248 outb(qlcfg5, qbase + 5); /* select timer */249 outb(qlcfg9 & 7, qbase + 9); /* prescaler */250/* outb(0x99, qbase + 5); */251 outb(scmd_id(cmd), qbase + 4);252 253 for (i = 0; i < cmd->cmd_len; i++)254 outb(cmd->cmnd[i], qbase + 2);255 256 priv->qlcmd = cmd;257 outb(0x41, qbase + 3); /* select and send command */258}259 260/*261 * Process scsi command - usually after interrupt262 */263 264static void ql_pcmd(struct scsi_cmnd *cmd)265{266 unsigned int i, j;267 unsigned long k;268 unsigned int status; /* scsi returned status */269 unsigned int message; /* scsi returned message */270 unsigned int phase; /* recorded scsi phase */271 unsigned int reqlen; /* total length of transfer */272 char *buf;273 struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);274 int qbase = priv->qbase;275 int int_type = priv->int_type;276 277 rtrc(1)278 j = inb(qbase + 6);279 i = inb(qbase + 5);280 if (i == 0x20) {281 set_host_byte(cmd, DID_NO_CONNECT);282 return;283 }284 i |= inb(qbase + 5); /* the 0x10 bit can be set after the 0x08 */285 if (i != 0x18) {286 printk(KERN_ERR "Ql:Bad Interrupt status:%02x\n", i);287 ql_zap(priv);288 set_host_byte(cmd, DID_BAD_INTR);289 return;290 }291 j &= 7; /* j = inb( qbase + 7 ) >> 5; */292 293 /* correct status is supposed to be step 4 */294 /* it sometimes returns step 3 but with 0 bytes left to send */295 /* We can try stuffing the FIFO with the max each time, but we will get a296 sequence of 3 if any bytes are left (but we do flush the FIFO anyway */297 298 if (j != 3 && j != 4) {299 printk(KERN_ERR "Ql:Bad sequence for command %d, int %02X, cmdleft = %d\n",300 j, i, inb(qbase + 7) & 0x1f);301 ql_zap(priv);302 set_host_byte(cmd, DID_ERROR);303 return;304 }305 306 if (inb(qbase + 7) & 0x1f) /* if some bytes in fifo */307 outb(1, qbase + 3); /* clear fifo */308 /* note that request_bufflen is the total xfer size when sg is used */309 reqlen = scsi_bufflen(cmd);310 /* note that it won't work if transfers > 16M are requested */311 if (reqlen && !((phase = inb(qbase + 4)) & 6)) { /* data phase */312 struct scatterlist *sg;313 rtrc(2)314 outb(reqlen, qbase); /* low-mid xfer cnt */315 outb(reqlen >> 8, qbase + 1); /* low-mid xfer cnt */316 outb(reqlen >> 16, qbase + 0xe); /* high xfer cnt */317 outb(0x90, qbase + 3); /* command do xfer */318 /* PIO pseudo DMA to buffer or sglist */319 REG1;320 321 scsi_for_each_sg(cmd, sg, scsi_sg_count(cmd), i) {322 if (priv->qabort) {323 REG0;324 set_host_byte(cmd,325 priv->qabort == 1 ?326 DID_ABORT : DID_RESET);327 }328 buf = sg_virt(sg);329 if (ql_pdma(priv, phase, buf, sg->length))330 break;331 }332 REG0;333 rtrc(2);334 /*335 * Wait for irq (split into second state of irq handler336 * if this can take time)337 */338 if ((k = ql_wai(priv))) {339 set_host_byte(cmd, k);340 return;341 }342 k = inb(qbase + 5); /* should be 0x10, bus service */343 }344 345 /*346 * Enter Status (and Message In) Phase347 */348 349 k = jiffies + WATCHDOG;350 351 while (time_before(jiffies, k) && !priv->qabort &&352 !(inb(qbase + 4) & 6))353 cpu_relax(); /* wait for status phase */354 355 if (time_after_eq(jiffies, k)) {356 ql_zap(priv);357 set_host_byte(cmd, DID_TIME_OUT);358 return;359 }360 361 /* FIXME: timeout ?? */362 while (inb(qbase + 5))363 cpu_relax(); /* clear pending ints */364 365 if (priv->qabort) {366 set_host_byte(cmd,367 priv->qabort == 1 ? DID_ABORT : DID_RESET);368 return;369 }370 371 outb(0x11, qbase + 3); /* get status and message */372 if ((k = ql_wai(priv))) {373 set_host_byte(cmd, k);374 return;375 }376 i = inb(qbase + 5); /* get chip irq stat */377 j = inb(qbase + 7) & 0x1f; /* and bytes rec'd */378 status = inb(qbase + 2);379 message = inb(qbase + 2);380 381 /*382 * Should get function complete int if Status and message, else383 * bus serv if only status384 */385 if (!((i == 8 && j == 2) || (i == 0x10 && j == 1))) {386 printk(KERN_ERR "Ql:Error during status phase, int=%02X, %d bytes recd\n", i, j);387 set_host_byte(cmd, DID_ERROR);388 }389 outb(0x12, qbase + 3); /* done, disconnect */390 rtrc(1);391 if ((k = ql_wai(priv))) {392 set_host_byte(cmd, k);393 return;394 }395 396 /*397 * Should get bus service interrupt and disconnect interrupt398 */399 400 i = inb(qbase + 5); /* should be bus service */401 while (!priv->qabort && ((i & 0x20) != 0x20)) {402 barrier();403 cpu_relax();404 i |= inb(qbase + 5);405 }406 rtrc(0);407 408 if (priv->qabort) {409 set_host_byte(cmd,410 priv->qabort == 1 ? DID_ABORT : DID_RESET);411 return;412 }413 414 set_host_byte(cmd, DID_OK);415 if (message != COMMAND_COMPLETE)416 scsi_msg_to_host_byte(cmd, message);417 set_status_byte(cmd, status);418 return;419}420 421/*422 * Interrupt handler423 */424 425static void ql_ihandl(void *dev_id)426{427 struct scsi_cmnd *icmd;428 struct Scsi_Host *host = dev_id;429 struct qlogicfas408_priv *priv = get_priv_by_host(host);430 int qbase = priv->qbase;431 REG0;432 433 if (!(inb(qbase + 4) & 0x80)) /* false alarm? */434 return;435 436 if (priv->qlcmd == NULL) { /* no command to process? */437 int i;438 i = 16;439 while (i-- && inb(qbase + 5)); /* maybe also ql_zap() */440 return;441 }442 icmd = priv->qlcmd;443 ql_pcmd(icmd);444 priv->qlcmd = NULL;445 /*446 * If result is CHECK CONDITION done calls qcommand to request447 * sense448 */449 scsi_done(icmd);450}451 452irqreturn_t qlogicfas408_ihandl(int irq, void *dev_id)453{454 unsigned long flags;455 struct Scsi_Host *host = dev_id;456 457 spin_lock_irqsave(host->host_lock, flags);458 ql_ihandl(dev_id);459 spin_unlock_irqrestore(host->host_lock, flags);460 return IRQ_HANDLED;461}462 463/*464 * Queued command465 */466 467static int qlogicfas408_queuecommand_lck(struct scsi_cmnd *cmd)468{469 void (*done)(struct scsi_cmnd *) = scsi_done;470 struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);471 472 set_host_byte(cmd, DID_OK);473 set_status_byte(cmd, SAM_STAT_GOOD);474 if (scmd_id(cmd) == priv->qinitid) {475 set_host_byte(cmd, DID_BAD_TARGET);476 done(cmd);477 return 0;478 }479 480 /* wait for the last command's interrupt to finish */481 while (priv->qlcmd != NULL) {482 barrier();483 cpu_relax();484 }485 ql_icmd(cmd);486 return 0;487}488 489DEF_SCSI_QCMD(qlogicfas408_queuecommand)490 491/*492 * Return bios parameters493 */494 495int qlogicfas408_biosparam(struct scsi_device *disk, struct block_device *dev,496 sector_t capacity, int ip[])497{498/* This should mimic the DOS Qlogic driver's behavior exactly */499 ip[0] = 0x40;500 ip[1] = 0x20;501 ip[2] = (unsigned long) capacity / (ip[0] * ip[1]);502 if (ip[2] > 1024) {503 ip[0] = 0xff;504 ip[1] = 0x3f;505 ip[2] = (unsigned long) capacity / (ip[0] * ip[1]);506#if 0507 if (ip[2] > 1023)508 ip[2] = 1023;509#endif510 }511 return 0;512}513 514/*515 * Abort a command in progress516 */517 518int qlogicfas408_abort(struct scsi_cmnd *cmd)519{520 struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);521 priv->qabort = 1;522 ql_zap(priv);523 return SUCCESS;524}525 526/*527 * Reset SCSI bus528 * FIXME: This function is invoked with cmd = NULL directly by529 * the PCMCIA qlogic_stub code. This wants fixing530 */531 532int qlogicfas408_host_reset(struct scsi_cmnd *cmd)533{534 struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);535 unsigned long flags;536 537 priv->qabort = 2;538 539 spin_lock_irqsave(cmd->device->host->host_lock, flags);540 ql_zap(priv);541 spin_unlock_irqrestore(cmd->device->host->host_lock, flags);542 543 return SUCCESS;544}545 546/*547 * Return info string548 */549 550const char *qlogicfas408_info(struct Scsi_Host *host)551{552 struct qlogicfas408_priv *priv = get_priv_by_host(host);553 return priv->qinfo;554}555 556/*557 * Get type of chip558 */559 560int qlogicfas408_get_chip_type(int qbase, int int_type)561{562 REG1;563 return inb(qbase + 0xe) & 0xf8;564}565 566/*567 * Perform initialization tasks568 */569 570void qlogicfas408_setup(int qbase, int id, int int_type)571{572 outb(1, qbase + 8); /* set for PIO pseudo DMA */573 REG0;574 outb(0x40 | qlcfg8 | id, qbase + 8); /* (ini) bus id, disable scsi rst */575 outb(qlcfg5, qbase + 5); /* select timer */576 outb(qlcfg9, qbase + 9); /* prescaler */577 578#if QL_RESET_AT_START579 outb(3, qbase + 3);580 581 REG1;582 /* FIXME: timeout */583 while (inb(qbase + 0xf) & 4)584 cpu_relax();585 586 REG0;587#endif588}589 590/*591 * Checks if this is a QLogic FAS 408592 */593 594int qlogicfas408_detect(int qbase, int int_type)595{596 REG1;597 return (((inb(qbase + 0xe) ^ inb(qbase + 0xe)) == 7) &&598 ((inb(qbase + 0xe) ^ inb(qbase + 0xe)) == 7));599}600 601/*602 * Disable interrupts603 */604 605void qlogicfas408_disable_ints(struct qlogicfas408_priv *priv)606{607 int qbase = priv->qbase;608 int int_type = priv->int_type;609 610 REG1;611 outb(0, qbase + 0xb); /* disable ints */612}613 614/*615 * Init and exit functions616 */617 618static int __init qlogicfas408_init(void)619{620 return 0;621}622 623static void __exit qlogicfas408_exit(void)624{625 626}627 628MODULE_AUTHOR("Tom Zerucha, Michael Griffith");629MODULE_DESCRIPTION("Driver for the Qlogic FAS SCSI controllers");630MODULE_LICENSE("GPL");631module_init(qlogicfas408_init);632module_exit(qlogicfas408_exit);633 634EXPORT_SYMBOL(qlogicfas408_info);635EXPORT_SYMBOL(qlogicfas408_queuecommand);636EXPORT_SYMBOL(qlogicfas408_abort);637EXPORT_SYMBOL(qlogicfas408_host_reset);638EXPORT_SYMBOL(qlogicfas408_biosparam);639EXPORT_SYMBOL(qlogicfas408_ihandl);640EXPORT_SYMBOL(qlogicfas408_get_chip_type);641EXPORT_SYMBOL(qlogicfas408_setup);642EXPORT_SYMBOL(qlogicfas408_detect);643EXPORT_SYMBOL(qlogicfas408_disable_ints);644 645