brintos

brintos / linux-shallow public Read only

0
0
Text · 19.9 KiB · bbf33b8 Raw
715 lines · c
1// SPDX-License-Identifier: GPL-2.02/*3 * This file is based on code from OCTEON SDK by Cavium Networks.4 *5 * Copyright (c) 2003-2010 Cavium Networks6 */7 8#include <linux/module.h>9#include <linux/kernel.h>10#include <linux/netdevice.h>11#include <linux/etherdevice.h>12#include <linux/ip.h>13#include <linux/ratelimit.h>14#include <linux/string.h>15#include <linux/interrupt.h>16#include <net/dst.h>17#ifdef CONFIG_XFRM18#include <linux/xfrm.h>19#include <net/xfrm.h>20#endif /* CONFIG_XFRM */21 22#include <linux/atomic.h>23#include <net/sch_generic.h>24 25#include "octeon-ethernet.h"26#include "ethernet-defines.h"27#include "ethernet-tx.h"28#include "ethernet-util.h"29 30#define CVM_OCT_SKB_CB(skb)	((u64 *)((skb)->cb))31 32/*33 * You can define GET_SKBUFF_QOS() to override how the skbuff output34 * function determines which output queue is used. The default35 * implementation always uses the base queue for the port. If, for36 * example, you wanted to use the skb->priority field, define37 * GET_SKBUFF_QOS as: #define GET_SKBUFF_QOS(skb) ((skb)->priority)38 */39#ifndef GET_SKBUFF_QOS40#define GET_SKBUFF_QOS(skb) 041#endif42 43static void cvm_oct_tx_do_cleanup(unsigned long arg);44static DECLARE_TASKLET_OLD(cvm_oct_tx_cleanup_tasklet, cvm_oct_tx_do_cleanup);45 46/* Maximum number of SKBs to try to free per xmit packet. */47#define MAX_SKB_TO_FREE (MAX_OUT_QUEUE_DEPTH * 2)48 49static inline int cvm_oct_adjust_skb_to_free(int skb_to_free, int fau)50{51	int undo;52 53	undo = skb_to_free > 0 ? MAX_SKB_TO_FREE : skb_to_free +54						   MAX_SKB_TO_FREE;55	if (undo > 0)56		cvmx_fau_atomic_add32(fau, -undo);57	skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ? MAX_SKB_TO_FREE :58						       -skb_to_free;59	return skb_to_free;60}61 62static void cvm_oct_kick_tx_poll_watchdog(void)63{64	union cvmx_ciu_timx ciu_timx;65 66	ciu_timx.u64 = 0;67	ciu_timx.s.one_shot = 1;68	ciu_timx.s.len = cvm_oct_tx_poll_interval;69	cvmx_write_csr(CVMX_CIU_TIMX(1), ciu_timx.u64);70}71 72static void cvm_oct_free_tx_skbs(struct net_device *dev)73{74	int skb_to_free;75	int qos, queues_per_port;76	int total_remaining = 0;77	unsigned long flags;78	struct octeon_ethernet *priv = netdev_priv(dev);79 80	queues_per_port = cvmx_pko_get_num_queues(priv->port);81	/* Drain any pending packets in the free list */82	for (qos = 0; qos < queues_per_port; qos++) {83		if (skb_queue_len(&priv->tx_free_list[qos]) == 0)84			continue;85		skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4,86						       MAX_SKB_TO_FREE);87		skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free,88							 priv->fau + qos * 4);89		if (skb_to_free > 0) {90			struct sk_buff *to_free_list = NULL;91 92			spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);93			while (skb_to_free > 0) {94				struct sk_buff *t;95 96				t = __skb_dequeue(&priv->tx_free_list[qos]);97				t->next = to_free_list;98				to_free_list = t;99				skb_to_free--;100			}101			spin_unlock_irqrestore(&priv->tx_free_list[qos].lock,102					       flags);103			/* Do the actual freeing outside of the lock. */104			while (to_free_list) {105				struct sk_buff *t = to_free_list;106 107				to_free_list = to_free_list->next;108				dev_kfree_skb_any(t);109			}110		}111		total_remaining += skb_queue_len(&priv->tx_free_list[qos]);112	}113	if (total_remaining < MAX_OUT_QUEUE_DEPTH && netif_queue_stopped(dev))114		netif_wake_queue(dev);115	if (total_remaining)116		cvm_oct_kick_tx_poll_watchdog();117}118 119/**120 * cvm_oct_xmit - transmit a packet121 * @skb:    Packet to send122 * @dev:    Device info structure123 *124 * Returns Always returns NETDEV_TX_OK125 */126netdev_tx_t cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)127{128	union cvmx_pko_command_word0 pko_command;129	union cvmx_buf_ptr hw_buffer;130	u64 old_scratch;131	u64 old_scratch2;132	int qos;133	int i;134	enum {QUEUE_CORE, QUEUE_HW, QUEUE_DROP} queue_type;135	struct octeon_ethernet *priv = netdev_priv(dev);136	struct sk_buff *to_free_list;137	int skb_to_free;138	int buffers_to_free;139	u32 total_to_clean;140	unsigned long flags;141#if REUSE_SKBUFFS_WITHOUT_FREE142	unsigned char *fpa_head;143#endif144 145	/*146	 * Prefetch the private data structure.  It is larger than the147	 * one cache line.148	 */149	prefetch(priv);150 151	/*152	 * The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to153	 * completely remove "qos" in the event neither interface154	 * supports multiple queues per port.155	 */156	if ((CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 > 1) ||157	    (CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 > 1)) {158		qos = GET_SKBUFF_QOS(skb);159		if (qos <= 0)160			qos = 0;161		else if (qos >= cvmx_pko_get_num_queues(priv->port))162			qos = 0;163	} else {164		qos = 0;165	}166 167	if (USE_ASYNC_IOBDMA) {168		/* Save scratch in case userspace is using it */169		CVMX_SYNCIOBDMA;170		old_scratch = cvmx_scratch_read64(CVMX_SCR_SCRATCH);171		old_scratch2 = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8);172 173		/*174		 * Fetch and increment the number of packets to be175		 * freed.176		 */177		cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH + 8,178					       FAU_NUM_PACKET_BUFFERS_TO_FREE,179					       0);180		cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH,181					       priv->fau + qos * 4,182					       MAX_SKB_TO_FREE);183	}184 185	/*186	 * We have space for 6 segment pointers, If there will be more187	 * than that, we must linearize.188	 */189	if (unlikely(skb_shinfo(skb)->nr_frags > 5)) {190		if (unlikely(__skb_linearize(skb))) {191			queue_type = QUEUE_DROP;192			if (USE_ASYNC_IOBDMA) {193				/*194				 * Get the number of skbuffs in use195				 * by the hardware196				 */197				CVMX_SYNCIOBDMA;198				skb_to_free =199					cvmx_scratch_read64(CVMX_SCR_SCRATCH);200			} else {201				/*202				 * Get the number of skbuffs in use203				 * by the hardware204				 */205				skb_to_free =206				     cvmx_fau_fetch_and_add32(priv->fau +207							      qos * 4,208							      MAX_SKB_TO_FREE);209			}210			skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free,211								 priv->fau +212								 qos * 4);213			spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);214			goto skip_xmit;215		}216	}217 218	/*219	 * The CN3XXX series of parts has an errata (GMX-401) which220	 * causes the GMX block to hang if a collision occurs towards221	 * the end of a <68 byte packet. As a workaround for this, we222	 * pad packets to be 68 bytes whenever we are in half duplex223	 * mode. We don't handle the case of having a small packet but224	 * no room to add the padding.  The kernel should always give225	 * us at least a cache line226	 */227	if ((skb->len < 64) && OCTEON_IS_MODEL(OCTEON_CN3XXX)) {228		union cvmx_gmxx_prtx_cfg gmx_prt_cfg;229		int interface = INTERFACE(priv->port);230		int index = INDEX(priv->port);231 232		if (interface < 2) {233			/* We only need to pad packet in half duplex mode */234			gmx_prt_cfg.u64 =235			    cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));236			if (gmx_prt_cfg.s.duplex == 0) {237				int add_bytes = 64 - skb->len;238 239				if ((skb_tail_pointer(skb) + add_bytes) <=240				    skb_end_pointer(skb))241					__skb_put_zero(skb, add_bytes);242			}243		}244	}245 246	/* Build the PKO command */247	pko_command.u64 = 0;248#ifdef __LITTLE_ENDIAN249	pko_command.s.le = 1;250#endif251	pko_command.s.n2 = 1;	/* Don't pollute L2 with the outgoing packet */252	pko_command.s.segs = 1;253	pko_command.s.total_bytes = skb->len;254	pko_command.s.size0 = CVMX_FAU_OP_SIZE_32;255	pko_command.s.subone0 = 1;256 257	pko_command.s.dontfree = 1;258 259	/* Build the PKO buffer pointer */260	hw_buffer.u64 = 0;261	if (skb_shinfo(skb)->nr_frags == 0) {262		hw_buffer.s.addr = XKPHYS_TO_PHYS((uintptr_t)skb->data);263		hw_buffer.s.pool = 0;264		hw_buffer.s.size = skb->len;265	} else {266		hw_buffer.s.addr = XKPHYS_TO_PHYS((uintptr_t)skb->data);267		hw_buffer.s.pool = 0;268		hw_buffer.s.size = skb_headlen(skb);269		CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;270		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {271			skb_frag_t *fs = skb_shinfo(skb)->frags + i;272 273			hw_buffer.s.addr =274				XKPHYS_TO_PHYS((uintptr_t)skb_frag_address(fs));275			hw_buffer.s.size = skb_frag_size(fs);276			CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;277		}278		hw_buffer.s.addr =279			XKPHYS_TO_PHYS((uintptr_t)CVM_OCT_SKB_CB(skb));280		hw_buffer.s.size = skb_shinfo(skb)->nr_frags + 1;281		pko_command.s.segs = skb_shinfo(skb)->nr_frags + 1;282		pko_command.s.gather = 1;283		goto dont_put_skbuff_in_hw;284	}285 286	/*287	 * See if we can put this skb in the FPA pool. Any strange288	 * behavior from the Linux networking stack will most likely289	 * be caused by a bug in the following code. If some field is290	 * in use by the network stack and gets carried over when a291	 * buffer is reused, bad things may happen.  If in doubt and292	 * you dont need the absolute best performance, disable the293	 * define REUSE_SKBUFFS_WITHOUT_FREE. The reuse of buffers has294	 * shown a 25% increase in performance under some loads.295	 */296#if REUSE_SKBUFFS_WITHOUT_FREE297	fpa_head = skb->head + 256 - ((unsigned long)skb->head & 0x7f);298	if (unlikely(skb->data < fpa_head)) {299		/* TX buffer beginning can't meet FPA alignment constraints */300		goto dont_put_skbuff_in_hw;301	}302	if (unlikely303	    ((skb_end_pointer(skb) - fpa_head) < CVMX_FPA_PACKET_POOL_SIZE)) {304		/* TX buffer isn't large enough for the FPA */305		goto dont_put_skbuff_in_hw;306	}307	if (unlikely(skb_shared(skb))) {308		/* TX buffer sharing data with someone else */309		goto dont_put_skbuff_in_hw;310	}311	if (unlikely(skb_cloned(skb))) {312		/* TX buffer has been cloned */313		goto dont_put_skbuff_in_hw;314	}315	if (unlikely(skb_header_cloned(skb))) {316		/* TX buffer header has been cloned */317		goto dont_put_skbuff_in_hw;318	}319	if (unlikely(skb->destructor)) {320		/* TX buffer has a destructor */321		goto dont_put_skbuff_in_hw;322	}323	if (unlikely(skb_shinfo(skb)->nr_frags)) {324		/* TX buffer has fragments */325		goto dont_put_skbuff_in_hw;326	}327	if (unlikely328	    (skb->truesize !=329	     sizeof(*skb) + skb_end_offset(skb))) {330		/* TX buffer truesize has been changed */331		goto dont_put_skbuff_in_hw;332	}333 334	/*335	 * We can use this buffer in the FPA.  We don't need the FAU336	 * update anymore337	 */338	pko_command.s.dontfree = 0;339 340	hw_buffer.s.back = ((unsigned long)skb->data >> 7) -341			   ((unsigned long)fpa_head >> 7);342 343	*(struct sk_buff **)(fpa_head - sizeof(void *)) = skb;344 345	/*346	 * The skbuff will be reused without ever being freed. We must347	 * cleanup a bunch of core things.348	 */349	dst_release(skb_dst(skb));350	skb_dst_set(skb, NULL);351	skb_ext_reset(skb);352	nf_reset_ct(skb);353	skb_reset_redirect(skb);354 355#ifdef CONFIG_NET_SCHED356	skb->tc_index = 0;357#endif /* CONFIG_NET_SCHED */358#endif /* REUSE_SKBUFFS_WITHOUT_FREE */359 360dont_put_skbuff_in_hw:361 362	/* Check if we can use the hardware checksumming */363	if ((skb->protocol == htons(ETH_P_IP)) &&364	    (ip_hdr(skb)->version == 4) &&365	    (ip_hdr(skb)->ihl == 5) &&366	    ((ip_hdr(skb)->frag_off == 0) ||367	     (ip_hdr(skb)->frag_off == htons(1 << 14))) &&368	    ((ip_hdr(skb)->protocol == IPPROTO_TCP) ||369	     (ip_hdr(skb)->protocol == IPPROTO_UDP))) {370		/* Use hardware checksum calc */371		pko_command.s.ipoffp1 = skb_network_offset(skb) + 1;372	}373 374	if (USE_ASYNC_IOBDMA) {375		/* Get the number of skbuffs in use by the hardware */376		CVMX_SYNCIOBDMA;377		skb_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH);378		buffers_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8);379	} else {380		/* Get the number of skbuffs in use by the hardware */381		skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4,382						       MAX_SKB_TO_FREE);383		buffers_to_free =384		    cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);385	}386 387	skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free,388						 priv->fau + qos * 4);389 390	/*391	 * If we're sending faster than the receive can free them then392	 * don't do the HW free.393	 */394	if ((buffers_to_free < -100) && !pko_command.s.dontfree)395		pko_command.s.dontfree = 1;396 397	if (pko_command.s.dontfree) {398		queue_type = QUEUE_CORE;399		pko_command.s.reg0 = priv->fau + qos * 4;400	} else {401		queue_type = QUEUE_HW;402	}403	if (USE_ASYNC_IOBDMA)404		cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH,405					       FAU_TOTAL_TX_TO_CLEAN, 1);406 407	spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);408 409	/* Drop this packet if we have too many already queued to the HW */410	if (unlikely(skb_queue_len(&priv->tx_free_list[qos]) >=411		     MAX_OUT_QUEUE_DEPTH)) {412		if (dev->tx_queue_len != 0) {413			/* Drop the lock when notifying the core.  */414			spin_unlock_irqrestore(&priv->tx_free_list[qos].lock,415					       flags);416			netif_stop_queue(dev);417			spin_lock_irqsave(&priv->tx_free_list[qos].lock,418					  flags);419		} else {420			/* If not using normal queueing.  */421			queue_type = QUEUE_DROP;422			goto skip_xmit;423		}424	}425 426	cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos,427				     CVMX_PKO_LOCK_NONE);428 429	/* Send the packet to the output queue */430	if (unlikely(cvmx_pko_send_packet_finish(priv->port,431						 priv->queue + qos,432						 pko_command, hw_buffer,433						 CVMX_PKO_LOCK_NONE))) {434		printk_ratelimited("%s: Failed to send the packet\n",435				   dev->name);436		queue_type = QUEUE_DROP;437	}438skip_xmit:439	to_free_list = NULL;440 441	switch (queue_type) {442	case QUEUE_DROP:443		skb->next = to_free_list;444		to_free_list = skb;445		dev->stats.tx_dropped++;446		break;447	case QUEUE_HW:448		cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, -1);449		break;450	case QUEUE_CORE:451		__skb_queue_tail(&priv->tx_free_list[qos], skb);452		break;453	default:454		BUG();455	}456 457	while (skb_to_free > 0) {458		struct sk_buff *t = __skb_dequeue(&priv->tx_free_list[qos]);459 460		t->next = to_free_list;461		to_free_list = t;462		skb_to_free--;463	}464 465	spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);466 467	/* Do the actual freeing outside of the lock. */468	while (to_free_list) {469		struct sk_buff *t = to_free_list;470 471		to_free_list = to_free_list->next;472		dev_kfree_skb_any(t);473	}474 475	if (USE_ASYNC_IOBDMA) {476		CVMX_SYNCIOBDMA;477		total_to_clean = cvmx_scratch_read64(CVMX_SCR_SCRATCH);478		/* Restore the scratch area */479		cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch);480		cvmx_scratch_write64(CVMX_SCR_SCRATCH + 8, old_scratch2);481	} else {482		total_to_clean =483			cvmx_fau_fetch_and_add32(FAU_TOTAL_TX_TO_CLEAN, 1);484	}485 486	if (total_to_clean & 0x3ff) {487		/*488		 * Schedule the cleanup tasklet every 1024 packets for489		 * the pathological case of high traffic on one port490		 * delaying clean up of packets on a different port491		 * that is blocked waiting for the cleanup.492		 */493		tasklet_schedule(&cvm_oct_tx_cleanup_tasklet);494	}495 496	cvm_oct_kick_tx_poll_watchdog();497 498	return NETDEV_TX_OK;499}500 501/**502 * cvm_oct_xmit_pow - transmit a packet to the POW503 * @skb:    Packet to send504 * @dev:    Device info structure505 * Returns Always returns zero506 */507netdev_tx_t cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)508{509	struct octeon_ethernet *priv = netdev_priv(dev);510	void *packet_buffer;511	void *copy_location;512 513	/* Get a work queue entry */514	struct cvmx_wqe *work = cvmx_fpa_alloc(CVMX_FPA_WQE_POOL);515 516	if (unlikely(!work)) {517		printk_ratelimited("%s: Failed to allocate a work queue entry\n",518				   dev->name);519		dev->stats.tx_dropped++;520		dev_kfree_skb_any(skb);521		return 0;522	}523 524	/* Get a packet buffer */525	packet_buffer = cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL);526	if (unlikely(!packet_buffer)) {527		printk_ratelimited("%s: Failed to allocate a packet buffer\n",528				   dev->name);529		cvmx_fpa_free(work, CVMX_FPA_WQE_POOL, 1);530		dev->stats.tx_dropped++;531		dev_kfree_skb_any(skb);532		return 0;533	}534 535	/*536	 * Calculate where we need to copy the data to. We need to537	 * leave 8 bytes for a next pointer (unused). We also need to538	 * include any configure skip. Then we need to align the IP539	 * packet src and dest into the same 64bit word. The below540	 * calculation may add a little extra, but that doesn't541	 * hurt.542	 */543	copy_location = packet_buffer + sizeof(u64);544	copy_location += ((CVMX_HELPER_FIRST_MBUFF_SKIP + 7) & 0xfff8) + 6;545 546	/*547	 * We have to copy the packet since whoever processes this548	 * packet will free it to a hardware pool. We can't use the549	 * trick of counting outstanding packets like in550	 * cvm_oct_xmit.551	 */552	memcpy(copy_location, skb->data, skb->len);553 554	/*555	 * Fill in some of the work queue fields. We may need to add556	 * more if the software at the other end needs them.557	 */558	if (!OCTEON_IS_MODEL(OCTEON_CN68XX))559		work->word0.pip.cn38xx.hw_chksum = skb->csum;560	work->word1.len = skb->len;561	cvmx_wqe_set_port(work, priv->port);562	cvmx_wqe_set_qos(work, priv->port & 0x7);563	cvmx_wqe_set_grp(work, pow_send_group);564	work->word1.tag_type = CVMX_HELPER_INPUT_TAG_TYPE;565	work->word1.tag = pow_send_group;	/* FIXME */566	/* Default to zero. Sets of zero later are commented out */567	work->word2.u64 = 0;568	work->word2.s.bufs = 1;569	work->packet_ptr.u64 = 0;570	work->packet_ptr.s.addr = cvmx_ptr_to_phys(copy_location);571	work->packet_ptr.s.pool = CVMX_FPA_PACKET_POOL;572	work->packet_ptr.s.size = CVMX_FPA_PACKET_POOL_SIZE;573	work->packet_ptr.s.back = (copy_location - packet_buffer) >> 7;574 575	if (skb->protocol == htons(ETH_P_IP)) {576		work->word2.s.ip_offset = 14;577#if 0578		work->word2.s.vlan_valid = 0;	/* FIXME */579		work->word2.s.vlan_cfi = 0;	/* FIXME */580		work->word2.s.vlan_id = 0;	/* FIXME */581		work->word2.s.dec_ipcomp = 0;	/* FIXME */582#endif583		work->word2.s.tcp_or_udp =584		    (ip_hdr(skb)->protocol == IPPROTO_TCP) ||585		    (ip_hdr(skb)->protocol == IPPROTO_UDP);586#if 0587		/* FIXME */588		work->word2.s.dec_ipsec = 0;589		/* We only support IPv4 right now */590		work->word2.s.is_v6 = 0;591		/* Hardware would set to zero */592		work->word2.s.software = 0;593		/* No error, packet is internal */594		work->word2.s.L4_error = 0;595#endif596		work->word2.s.is_frag = !((ip_hdr(skb)->frag_off == 0) ||597					  (ip_hdr(skb)->frag_off ==598					      cpu_to_be16(1 << 14)));599#if 0600		/* Assume Linux is sending a good packet */601		work->word2.s.IP_exc = 0;602#endif603		work->word2.s.is_bcast = (skb->pkt_type == PACKET_BROADCAST);604		work->word2.s.is_mcast = (skb->pkt_type == PACKET_MULTICAST);605#if 0606		/* This is an IP packet */607		work->word2.s.not_IP = 0;608		/* No error, packet is internal */609		work->word2.s.rcv_error = 0;610		/* No error, packet is internal */611		work->word2.s.err_code = 0;612#endif613 614		/*615		 * When copying the data, include 4 bytes of the616		 * ethernet header to align the same way hardware617		 * does.618		 */619		memcpy(work->packet_data, skb->data + 10,620		       sizeof(work->packet_data));621	} else {622#if 0623		work->word2.snoip.vlan_valid = 0;	/* FIXME */624		work->word2.snoip.vlan_cfi = 0;	/* FIXME */625		work->word2.snoip.vlan_id = 0;	/* FIXME */626		work->word2.snoip.software = 0;	/* Hardware would set to zero */627#endif628		work->word2.snoip.is_rarp = skb->protocol == htons(ETH_P_RARP);629		work->word2.snoip.is_arp = skb->protocol == htons(ETH_P_ARP);630		work->word2.snoip.is_bcast =631		    (skb->pkt_type == PACKET_BROADCAST);632		work->word2.snoip.is_mcast =633		    (skb->pkt_type == PACKET_MULTICAST);634		work->word2.snoip.not_IP = 1;	/* IP was done up above */635#if 0636		/* No error, packet is internal */637		work->word2.snoip.rcv_error = 0;638		/* No error, packet is internal */639		work->word2.snoip.err_code = 0;640#endif641		memcpy(work->packet_data, skb->data, sizeof(work->packet_data));642	}643 644	/* Submit the packet to the POW */645	cvmx_pow_work_submit(work, work->word1.tag, work->word1.tag_type,646			     cvmx_wqe_get_qos(work), cvmx_wqe_get_grp(work));647	dev->stats.tx_packets++;648	dev->stats.tx_bytes += skb->len;649	dev_consume_skb_any(skb);650	return 0;651}652 653/**654 * cvm_oct_tx_shutdown_dev - free all skb that are currently queued for TX.655 * @dev:    Device being shutdown656 *657 */658void cvm_oct_tx_shutdown_dev(struct net_device *dev)659{660	struct octeon_ethernet *priv = netdev_priv(dev);661	unsigned long flags;662	int qos;663 664	for (qos = 0; qos < 16; qos++) {665		spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);666		while (skb_queue_len(&priv->tx_free_list[qos]))667			dev_kfree_skb_any(__skb_dequeue668					  (&priv->tx_free_list[qos]));669		spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);670	}671}672 673static void cvm_oct_tx_do_cleanup(unsigned long arg)674{675	int port;676 677	for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) {678		if (cvm_oct_device[port]) {679			struct net_device *dev = cvm_oct_device[port];680 681			cvm_oct_free_tx_skbs(dev);682		}683	}684}685 686static irqreturn_t cvm_oct_tx_cleanup_watchdog(int cpl, void *dev_id)687{688	/* Disable the interrupt.  */689	cvmx_write_csr(CVMX_CIU_TIMX(1), 0);690	/* Do the work in the tasklet.  */691	tasklet_schedule(&cvm_oct_tx_cleanup_tasklet);692	return IRQ_HANDLED;693}694 695void cvm_oct_tx_initialize(void)696{697	int i;698 699	/* Disable the interrupt.  */700	cvmx_write_csr(CVMX_CIU_TIMX(1), 0);701	/* Register an IRQ handler to receive CIU_TIMX(1) interrupts */702	i = request_irq(OCTEON_IRQ_TIMER1,703			cvm_oct_tx_cleanup_watchdog, 0,704			"Ethernet", cvm_oct_device);705 706	if (i)707		panic("Could not acquire Ethernet IRQ %d\n", OCTEON_IRQ_TIMER1);708}709 710void cvm_oct_tx_shutdown(void)711{712	/* Free the interrupt handler */713	free_irq(OCTEON_IRQ_TIMER1, cvm_oct_device);714}715