990 lines · c
1// SPDX-License-Identifier: GPL-2.0-only2/*3 * Copyright (C) 2006-2010 Red Hat, Inc. All rights reserved.4 */5 6#include <linux/miscdevice.h>7#include <linux/init.h>8#include <linux/wait.h>9#include <linux/file.h>10#include <linux/fs.h>11#include <linux/poll.h>12#include <linux/signal.h>13#include <linux/spinlock.h>14#include <linux/dlm.h>15#include <linux/dlm_device.h>16#include <linux/slab.h>17#include <linux/sched/signal.h>18 19#include <trace/events/dlm.h>20 21#include "dlm_internal.h"22#include "lockspace.h"23#include "lock.h"24#include "lvb_table.h"25#include "user.h"26#include "ast.h"27#include "config.h"28#include "memory.h"29 30static const char name_prefix[] = "dlm";31static const struct file_operations device_fops;32static atomic_t dlm_monitor_opened;33static int dlm_monitor_unused = 1;34 35#ifdef CONFIG_COMPAT36 37struct dlm_lock_params32 {38 __u8 mode;39 __u8 namelen;40 __u16 unused;41 __u32 flags;42 __u32 lkid;43 __u32 parent;44 __u64 xid;45 __u64 timeout;46 __u32 castparam;47 __u32 castaddr;48 __u32 bastparam;49 __u32 bastaddr;50 __u32 lksb;51 char lvb[DLM_USER_LVB_LEN];52 char name[];53};54 55struct dlm_write_request32 {56 __u32 version[3];57 __u8 cmd;58 __u8 is64bit;59 __u8 unused[2];60 61 union {62 struct dlm_lock_params32 lock;63 struct dlm_lspace_params lspace;64 struct dlm_purge_params purge;65 } i;66};67 68struct dlm_lksb32 {69 __u32 sb_status;70 __u32 sb_lkid;71 __u8 sb_flags;72 __u32 sb_lvbptr;73};74 75struct dlm_lock_result32 {76 __u32 version[3];77 __u32 length;78 __u32 user_astaddr;79 __u32 user_astparam;80 __u32 user_lksb;81 struct dlm_lksb32 lksb;82 __u8 bast_mode;83 __u8 unused[3];84 /* Offsets may be zero if no data is present */85 __u32 lvb_offset;86};87 88static void compat_input(struct dlm_write_request *kb,89 struct dlm_write_request32 *kb32,90 int namelen)91{92 kb->version[0] = kb32->version[0];93 kb->version[1] = kb32->version[1];94 kb->version[2] = kb32->version[2];95 96 kb->cmd = kb32->cmd;97 kb->is64bit = kb32->is64bit;98 if (kb->cmd == DLM_USER_CREATE_LOCKSPACE ||99 kb->cmd == DLM_USER_REMOVE_LOCKSPACE) {100 kb->i.lspace.flags = kb32->i.lspace.flags;101 kb->i.lspace.minor = kb32->i.lspace.minor;102 memcpy(kb->i.lspace.name, kb32->i.lspace.name, namelen);103 } else if (kb->cmd == DLM_USER_PURGE) {104 kb->i.purge.nodeid = kb32->i.purge.nodeid;105 kb->i.purge.pid = kb32->i.purge.pid;106 } else {107 kb->i.lock.mode = kb32->i.lock.mode;108 kb->i.lock.namelen = kb32->i.lock.namelen;109 kb->i.lock.flags = kb32->i.lock.flags;110 kb->i.lock.lkid = kb32->i.lock.lkid;111 kb->i.lock.parent = kb32->i.lock.parent;112 kb->i.lock.xid = kb32->i.lock.xid;113 kb->i.lock.timeout = kb32->i.lock.timeout;114 kb->i.lock.castparam = (__user void *)(long)kb32->i.lock.castparam;115 kb->i.lock.castaddr = (__user void *)(long)kb32->i.lock.castaddr;116 kb->i.lock.bastparam = (__user void *)(long)kb32->i.lock.bastparam;117 kb->i.lock.bastaddr = (__user void *)(long)kb32->i.lock.bastaddr;118 kb->i.lock.lksb = (__user void *)(long)kb32->i.lock.lksb;119 memcpy(kb->i.lock.lvb, kb32->i.lock.lvb, DLM_USER_LVB_LEN);120 memcpy(kb->i.lock.name, kb32->i.lock.name, namelen);121 }122}123 124static void compat_output(struct dlm_lock_result *res,125 struct dlm_lock_result32 *res32)126{127 memset(res32, 0, sizeof(*res32));128 129 res32->version[0] = res->version[0];130 res32->version[1] = res->version[1];131 res32->version[2] = res->version[2];132 133 res32->user_astaddr = (__u32)(__force long)res->user_astaddr;134 res32->user_astparam = (__u32)(__force long)res->user_astparam;135 res32->user_lksb = (__u32)(__force long)res->user_lksb;136 res32->bast_mode = res->bast_mode;137 138 res32->lvb_offset = res->lvb_offset;139 res32->length = res->length;140 141 res32->lksb.sb_status = res->lksb.sb_status;142 res32->lksb.sb_flags = res->lksb.sb_flags;143 res32->lksb.sb_lkid = res->lksb.sb_lkid;144 res32->lksb.sb_lvbptr = (__u32)(long)res->lksb.sb_lvbptr;145}146#endif147 148/* Figure out if this lock is at the end of its life and no longer149 available for the application to use. The lkb still exists until150 the final ast is read. A lock becomes EOL in three situations:151 1. a noqueue request fails with EAGAIN152 2. an unlock completes with EUNLOCK153 3. a cancel of a waiting request completes with ECANCEL/EDEADLK154 An EOL lock needs to be removed from the process's list of locks.155 And we can't allow any new operation on an EOL lock. This is156 not related to the lifetime of the lkb struct which is managed157 entirely by refcount. */158 159static int lkb_is_endoflife(int mode, int status)160{161 switch (status) {162 case -DLM_EUNLOCK:163 return 1;164 case -DLM_ECANCEL:165 case -ETIMEDOUT:166 case -EDEADLK:167 case -EAGAIN:168 if (mode == DLM_LOCK_IV)169 return 1;170 break;171 }172 return 0;173}174 175/* we could possibly check if the cancel of an orphan has resulted in the lkb176 being removed and then remove that lkb from the orphans list and free it */177 178void dlm_user_add_ast(struct dlm_lkb *lkb, uint32_t flags, int mode,179 int status, uint32_t sbflags)180{181 struct dlm_ls *ls;182 struct dlm_user_args *ua;183 struct dlm_user_proc *proc;184 struct dlm_callback *cb;185 int rv, copy_lvb;186 187 if (test_bit(DLM_DFL_ORPHAN_BIT, &lkb->lkb_dflags) ||188 test_bit(DLM_IFL_DEAD_BIT, &lkb->lkb_iflags))189 return;190 191 ls = lkb->lkb_resource->res_ls;192 spin_lock_bh(&ls->ls_clear_proc_locks);193 194 /* If ORPHAN/DEAD flag is set, it means the process is dead so an ast195 can't be delivered. For ORPHAN's, dlm_clear_proc_locks() freed196 lkb->ua so we can't try to use it. This second check is necessary197 for cases where a completion ast is received for an operation that198 began before clear_proc_locks did its cancel/unlock. */199 200 if (test_bit(DLM_DFL_ORPHAN_BIT, &lkb->lkb_dflags) ||201 test_bit(DLM_IFL_DEAD_BIT, &lkb->lkb_iflags))202 goto out;203 204 DLM_ASSERT(lkb->lkb_ua, dlm_print_lkb(lkb););205 ua = lkb->lkb_ua;206 proc = ua->proc;207 208 if ((flags & DLM_CB_BAST) && ua->bastaddr == NULL)209 goto out;210 211 if ((flags & DLM_CB_CAST) && lkb_is_endoflife(mode, status))212 set_bit(DLM_IFL_ENDOFLIFE_BIT, &lkb->lkb_iflags);213 214 spin_lock_bh(&proc->asts_spin);215 216 if (!dlm_may_skip_callback(lkb, flags, mode, status, sbflags,217 ©_lvb)) {218 rv = dlm_get_cb(lkb, flags, mode, status, sbflags, &cb);219 if (!rv) {220 cb->copy_lvb = copy_lvb;221 cb->ua = *ua;222 cb->lkb_lksb = &cb->ua.lksb;223 if (copy_lvb) {224 memcpy(cb->lvbptr, ua->lksb.sb_lvbptr,225 DLM_USER_LVB_LEN);226 cb->lkb_lksb->sb_lvbptr = cb->lvbptr;227 }228 229 list_add_tail(&cb->list, &proc->asts);230 wake_up_interruptible(&proc->wait);231 }232 }233 spin_unlock_bh(&proc->asts_spin);234 235 if (test_bit(DLM_IFL_ENDOFLIFE_BIT, &lkb->lkb_iflags)) {236 /* N.B. spin_lock locks_spin, not asts_spin */237 spin_lock_bh(&proc->locks_spin);238 if (!list_empty(&lkb->lkb_ownqueue)) {239 list_del_init(&lkb->lkb_ownqueue);240 dlm_put_lkb(lkb);241 }242 spin_unlock_bh(&proc->locks_spin);243 }244 out:245 spin_unlock_bh(&ls->ls_clear_proc_locks);246}247 248static int device_user_lock(struct dlm_user_proc *proc,249 struct dlm_lock_params *params)250{251 struct dlm_ls *ls;252 struct dlm_user_args *ua;253 uint32_t lkid;254 int error = -ENOMEM;255 256 ls = dlm_find_lockspace_local(proc->lockspace);257 if (!ls)258 return -ENOENT;259 260 if (!params->castaddr || !params->lksb) {261 error = -EINVAL;262 goto out;263 }264 265 ua = kzalloc(sizeof(struct dlm_user_args), GFP_NOFS);266 if (!ua)267 goto out;268 ua->proc = proc;269 ua->user_lksb = params->lksb;270 ua->castparam = params->castparam;271 ua->castaddr = params->castaddr;272 ua->bastparam = params->bastparam;273 ua->bastaddr = params->bastaddr;274 ua->xid = params->xid;275 276 if (params->flags & DLM_LKF_CONVERT) {277 error = dlm_user_convert(ls, ua,278 params->mode, params->flags,279 params->lkid, params->lvb);280 } else if (params->flags & DLM_LKF_ORPHAN) {281 error = dlm_user_adopt_orphan(ls, ua,282 params->mode, params->flags,283 params->name, params->namelen,284 &lkid);285 if (!error)286 error = lkid;287 } else {288 error = dlm_user_request(ls, ua,289 params->mode, params->flags,290 params->name, params->namelen);291 if (!error)292 error = ua->lksb.sb_lkid;293 }294 out:295 dlm_put_lockspace(ls);296 return error;297}298 299static int device_user_unlock(struct dlm_user_proc *proc,300 struct dlm_lock_params *params)301{302 struct dlm_ls *ls;303 struct dlm_user_args *ua;304 int error = -ENOMEM;305 306 ls = dlm_find_lockspace_local(proc->lockspace);307 if (!ls)308 return -ENOENT;309 310 ua = kzalloc(sizeof(struct dlm_user_args), GFP_NOFS);311 if (!ua)312 goto out;313 ua->proc = proc;314 ua->user_lksb = params->lksb;315 ua->castparam = params->castparam;316 ua->castaddr = params->castaddr;317 318 if (params->flags & DLM_LKF_CANCEL)319 error = dlm_user_cancel(ls, ua, params->flags, params->lkid);320 else321 error = dlm_user_unlock(ls, ua, params->flags, params->lkid,322 params->lvb);323 out:324 dlm_put_lockspace(ls);325 return error;326}327 328static int device_user_deadlock(struct dlm_user_proc *proc,329 struct dlm_lock_params *params)330{331 struct dlm_ls *ls;332 int error;333 334 ls = dlm_find_lockspace_local(proc->lockspace);335 if (!ls)336 return -ENOENT;337 338 error = dlm_user_deadlock(ls, params->flags, params->lkid);339 340 dlm_put_lockspace(ls);341 return error;342}343 344static int dlm_device_register(struct dlm_ls *ls, char *name)345{346 int error, len;347 348 /* The device is already registered. This happens when the349 lockspace is created multiple times from userspace. */350 if (ls->ls_device.name)351 return 0;352 353 error = -ENOMEM;354 len = strlen(name) + strlen(name_prefix) + 2;355 ls->ls_device.name = kzalloc(len, GFP_NOFS);356 if (!ls->ls_device.name)357 goto fail;358 359 snprintf((char *)ls->ls_device.name, len, "%s_%s", name_prefix,360 name);361 ls->ls_device.fops = &device_fops;362 ls->ls_device.minor = MISC_DYNAMIC_MINOR;363 364 error = misc_register(&ls->ls_device);365 if (error) {366 kfree(ls->ls_device.name);367 /* this has to be set to NULL368 * to avoid a double-free in dlm_device_deregister369 */370 ls->ls_device.name = NULL;371 }372fail:373 return error;374}375 376int dlm_device_deregister(struct dlm_ls *ls)377{378 /* The device is not registered. This happens when the lockspace379 was never used from userspace, or when device_create_lockspace()380 calls dlm_release_lockspace() after the register fails. */381 if (!ls->ls_device.name)382 return 0;383 384 misc_deregister(&ls->ls_device);385 kfree(ls->ls_device.name);386 return 0;387}388 389static int device_user_purge(struct dlm_user_proc *proc,390 struct dlm_purge_params *params)391{392 struct dlm_ls *ls;393 int error;394 395 ls = dlm_find_lockspace_local(proc->lockspace);396 if (!ls)397 return -ENOENT;398 399 error = dlm_user_purge(ls, proc, params->nodeid, params->pid);400 401 dlm_put_lockspace(ls);402 return error;403}404 405static int device_create_lockspace(struct dlm_lspace_params *params)406{407 dlm_lockspace_t *lockspace;408 struct dlm_ls *ls;409 int error;410 411 if (!capable(CAP_SYS_ADMIN))412 return -EPERM;413 414 error = dlm_new_user_lockspace(params->name, dlm_config.ci_cluster_name,415 params->flags, DLM_USER_LVB_LEN, NULL,416 NULL, NULL, &lockspace);417 if (error)418 return error;419 420 ls = dlm_find_lockspace_local(lockspace);421 if (!ls)422 return -ENOENT;423 424 error = dlm_device_register(ls, params->name);425 dlm_put_lockspace(ls);426 427 if (error)428 dlm_release_lockspace(lockspace, 0);429 else430 error = ls->ls_device.minor;431 432 return error;433}434 435static int device_remove_lockspace(struct dlm_lspace_params *params)436{437 dlm_lockspace_t *lockspace;438 struct dlm_ls *ls;439 int error, force = 0;440 441 if (!capable(CAP_SYS_ADMIN))442 return -EPERM;443 444 ls = dlm_find_lockspace_device(params->minor);445 if (!ls)446 return -ENOENT;447 448 if (params->flags & DLM_USER_LSFLG_FORCEFREE)449 force = 2;450 451 lockspace = ls;452 dlm_put_lockspace(ls);453 454 /* The final dlm_release_lockspace waits for references to go to455 zero, so all processes will need to close their device for the456 ls before the release will proceed. release also calls the457 device_deregister above. Converting a positive return value458 from release to zero means that userspace won't know when its459 release was the final one, but it shouldn't need to know. */460 461 error = dlm_release_lockspace(lockspace, force);462 if (error > 0)463 error = 0;464 return error;465}466 467/* Check the user's version matches ours */468static int check_version(struct dlm_write_request *req)469{470 if (req->version[0] != DLM_DEVICE_VERSION_MAJOR ||471 (req->version[0] == DLM_DEVICE_VERSION_MAJOR &&472 req->version[1] > DLM_DEVICE_VERSION_MINOR)) {473 474 printk(KERN_DEBUG "dlm: process %s (%d) version mismatch "475 "user (%d.%d.%d) kernel (%d.%d.%d)\n",476 current->comm,477 task_pid_nr(current),478 req->version[0],479 req->version[1],480 req->version[2],481 DLM_DEVICE_VERSION_MAJOR,482 DLM_DEVICE_VERSION_MINOR,483 DLM_DEVICE_VERSION_PATCH);484 return -EINVAL;485 }486 return 0;487}488 489/*490 * device_write491 *492 * device_user_lock493 * dlm_user_request -> request_lock494 * dlm_user_convert -> convert_lock495 *496 * device_user_unlock497 * dlm_user_unlock -> unlock_lock498 * dlm_user_cancel -> cancel_lock499 *500 * device_create_lockspace501 * dlm_new_lockspace502 *503 * device_remove_lockspace504 * dlm_release_lockspace505 */506 507/* a write to a lockspace device is a lock or unlock request, a write508 to the control device is to create/remove a lockspace */509 510static ssize_t device_write(struct file *file, const char __user *buf,511 size_t count, loff_t *ppos)512{513 struct dlm_user_proc *proc = file->private_data;514 struct dlm_write_request *kbuf;515 int error;516 517#ifdef CONFIG_COMPAT518 if (count < sizeof(struct dlm_write_request32))519#else520 if (count < sizeof(struct dlm_write_request))521#endif522 return -EINVAL;523 524 /*525 * can't compare against COMPAT/dlm_write_request32 because526 * we don't yet know if is64bit is zero527 */528 if (count > sizeof(struct dlm_write_request) + DLM_RESNAME_MAXLEN)529 return -EINVAL;530 531 kbuf = memdup_user_nul(buf, count);532 if (IS_ERR(kbuf))533 return PTR_ERR(kbuf);534 535 if (check_version(kbuf)) {536 error = -EBADE;537 goto out_free;538 }539 540#ifdef CONFIG_COMPAT541 if (!kbuf->is64bit) {542 struct dlm_write_request32 *k32buf;543 int namelen = 0;544 545 if (count > sizeof(struct dlm_write_request32))546 namelen = count - sizeof(struct dlm_write_request32);547 548 k32buf = (struct dlm_write_request32 *)kbuf;549 550 /* add 1 after namelen so that the name string is terminated */551 kbuf = kzalloc(sizeof(struct dlm_write_request) + namelen + 1,552 GFP_NOFS);553 if (!kbuf) {554 kfree(k32buf);555 return -ENOMEM;556 }557 558 if (proc)559 set_bit(DLM_PROC_FLAGS_COMPAT, &proc->flags);560 561 compat_input(kbuf, k32buf, namelen);562 kfree(k32buf);563 }564#endif565 566 /* do we really need this? can a write happen after a close? */567 if ((kbuf->cmd == DLM_USER_LOCK || kbuf->cmd == DLM_USER_UNLOCK) &&568 (proc && test_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags))) {569 error = -EINVAL;570 goto out_free;571 }572 573 error = -EINVAL;574 575 switch (kbuf->cmd)576 {577 case DLM_USER_LOCK:578 if (!proc) {579 log_print("no locking on control device");580 goto out_free;581 }582 error = device_user_lock(proc, &kbuf->i.lock);583 break;584 585 case DLM_USER_UNLOCK:586 if (!proc) {587 log_print("no locking on control device");588 goto out_free;589 }590 error = device_user_unlock(proc, &kbuf->i.lock);591 break;592 593 case DLM_USER_DEADLOCK:594 if (!proc) {595 log_print("no locking on control device");596 goto out_free;597 }598 error = device_user_deadlock(proc, &kbuf->i.lock);599 break;600 601 case DLM_USER_CREATE_LOCKSPACE:602 if (proc) {603 log_print("create/remove only on control device");604 goto out_free;605 }606 error = device_create_lockspace(&kbuf->i.lspace);607 break;608 609 case DLM_USER_REMOVE_LOCKSPACE:610 if (proc) {611 log_print("create/remove only on control device");612 goto out_free;613 }614 error = device_remove_lockspace(&kbuf->i.lspace);615 break;616 617 case DLM_USER_PURGE:618 if (!proc) {619 log_print("no locking on control device");620 goto out_free;621 }622 error = device_user_purge(proc, &kbuf->i.purge);623 break;624 625 default:626 log_print("Unknown command passed to DLM device : %d\n",627 kbuf->cmd);628 }629 630 out_free:631 kfree(kbuf);632 return error;633}634 635/* Every process that opens the lockspace device has its own "proc" structure636 hanging off the open file that's used to keep track of locks owned by the637 process and asts that need to be delivered to the process. */638 639static int device_open(struct inode *inode, struct file *file)640{641 struct dlm_user_proc *proc;642 struct dlm_ls *ls;643 644 ls = dlm_find_lockspace_device(iminor(inode));645 if (!ls)646 return -ENOENT;647 648 proc = kzalloc(sizeof(struct dlm_user_proc), GFP_NOFS);649 if (!proc) {650 dlm_put_lockspace(ls);651 return -ENOMEM;652 }653 654 proc->lockspace = ls;655 INIT_LIST_HEAD(&proc->asts);656 INIT_LIST_HEAD(&proc->locks);657 INIT_LIST_HEAD(&proc->unlocking);658 spin_lock_init(&proc->asts_spin);659 spin_lock_init(&proc->locks_spin);660 init_waitqueue_head(&proc->wait);661 file->private_data = proc;662 663 return 0;664}665 666static int device_close(struct inode *inode, struct file *file)667{668 struct dlm_user_proc *proc = file->private_data;669 struct dlm_ls *ls;670 671 ls = dlm_find_lockspace_local(proc->lockspace);672 if (!ls)673 return -ENOENT;674 675 set_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags);676 677 dlm_clear_proc_locks(ls, proc);678 679 /* at this point no more lkb's should exist for this lockspace,680 so there's no chance of dlm_user_add_ast() being called and681 looking for lkb->ua->proc */682 683 kfree(proc);684 file->private_data = NULL;685 686 dlm_put_lockspace(ls);687 dlm_put_lockspace(ls); /* for the find in device_open() */688 689 /* FIXME: AUTOFREE: if this ls is no longer used do690 device_remove_lockspace() */691 692 return 0;693}694 695static int copy_result_to_user(struct dlm_user_args *ua, int compat,696 uint32_t flags, int mode, int copy_lvb,697 char __user *buf, size_t count)698{699#ifdef CONFIG_COMPAT700 struct dlm_lock_result32 result32;701#endif702 struct dlm_lock_result result;703 void *resultptr;704 int error=0;705 int len;706 int struct_len;707 708 memset(&result, 0, sizeof(struct dlm_lock_result));709 result.version[0] = DLM_DEVICE_VERSION_MAJOR;710 result.version[1] = DLM_DEVICE_VERSION_MINOR;711 result.version[2] = DLM_DEVICE_VERSION_PATCH;712 memcpy(&result.lksb, &ua->lksb, offsetof(struct dlm_lksb, sb_lvbptr));713 result.user_lksb = ua->user_lksb;714 715 /* FIXME: dlm1 provides for the user's bastparam/addr to not be updated716 in a conversion unless the conversion is successful. See code717 in dlm_user_convert() for updating ua from ua_tmp. OpenVMS, though,718 notes that a new blocking AST address and parameter are set even if719 the conversion fails, so maybe we should just do that. */720 721 if (flags & DLM_CB_BAST) {722 result.user_astaddr = ua->bastaddr;723 result.user_astparam = ua->bastparam;724 result.bast_mode = mode;725 } else {726 result.user_astaddr = ua->castaddr;727 result.user_astparam = ua->castparam;728 }729 730#ifdef CONFIG_COMPAT731 if (compat)732 len = sizeof(struct dlm_lock_result32);733 else734#endif735 len = sizeof(struct dlm_lock_result);736 struct_len = len;737 738 /* copy lvb to userspace if there is one, it's been updated, and739 the user buffer has space for it */740 741 if (copy_lvb && ua->lksb.sb_lvbptr && count >= len + DLM_USER_LVB_LEN) {742 if (copy_to_user(buf+len, ua->lksb.sb_lvbptr,743 DLM_USER_LVB_LEN)) {744 error = -EFAULT;745 goto out;746 }747 748 result.lvb_offset = len;749 len += DLM_USER_LVB_LEN;750 }751 752 result.length = len;753 resultptr = &result;754#ifdef CONFIG_COMPAT755 if (compat) {756 compat_output(&result, &result32);757 resultptr = &result32;758 }759#endif760 761 if (copy_to_user(buf, resultptr, struct_len))762 error = -EFAULT;763 else764 error = len;765 out:766 return error;767}768 769static int copy_version_to_user(char __user *buf, size_t count)770{771 struct dlm_device_version ver;772 773 memset(&ver, 0, sizeof(struct dlm_device_version));774 ver.version[0] = DLM_DEVICE_VERSION_MAJOR;775 ver.version[1] = DLM_DEVICE_VERSION_MINOR;776 ver.version[2] = DLM_DEVICE_VERSION_PATCH;777 778 if (copy_to_user(buf, &ver, sizeof(struct dlm_device_version)))779 return -EFAULT;780 return sizeof(struct dlm_device_version);781}782 783/* a read returns a single ast described in a struct dlm_lock_result */784 785static ssize_t device_read(struct file *file, char __user *buf, size_t count,786 loff_t *ppos)787{788 struct dlm_user_proc *proc = file->private_data;789 DECLARE_WAITQUEUE(wait, current);790 struct dlm_callback *cb;791 int rv, ret;792 793 if (count == sizeof(struct dlm_device_version)) {794 rv = copy_version_to_user(buf, count);795 return rv;796 }797 798 if (!proc) {799 log_print("non-version read from control device %zu", count);800 return -EINVAL;801 }802 803#ifdef CONFIG_COMPAT804 if (count < sizeof(struct dlm_lock_result32))805#else806 if (count < sizeof(struct dlm_lock_result))807#endif808 return -EINVAL;809 810 /* do we really need this? can a read happen after a close? */811 if (test_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags))812 return -EINVAL;813 814 spin_lock_bh(&proc->asts_spin);815 if (list_empty(&proc->asts)) {816 if (file->f_flags & O_NONBLOCK) {817 spin_unlock_bh(&proc->asts_spin);818 return -EAGAIN;819 }820 821 add_wait_queue(&proc->wait, &wait);822 823 repeat:824 set_current_state(TASK_INTERRUPTIBLE);825 if (list_empty(&proc->asts) && !signal_pending(current)) {826 spin_unlock_bh(&proc->asts_spin);827 schedule();828 spin_lock_bh(&proc->asts_spin);829 goto repeat;830 }831 set_current_state(TASK_RUNNING);832 remove_wait_queue(&proc->wait, &wait);833 834 if (signal_pending(current)) {835 spin_unlock_bh(&proc->asts_spin);836 return -ERESTARTSYS;837 }838 }839 840 /* if we empty lkb_callbacks, we don't want to unlock the spinlock841 without removing lkb_cb_list; so empty lkb_cb_list is always842 consistent with empty lkb_callbacks */843 844 cb = list_first_entry(&proc->asts, struct dlm_callback, list);845 list_del(&cb->list);846 spin_unlock_bh(&proc->asts_spin);847 848 if (cb->flags & DLM_CB_BAST) {849 trace_dlm_bast(cb->ls_id, cb->lkb_id, cb->mode, cb->res_name,850 cb->res_length);851 } else if (cb->flags & DLM_CB_CAST) {852 cb->lkb_lksb->sb_status = cb->sb_status;853 cb->lkb_lksb->sb_flags = cb->sb_flags;854 trace_dlm_ast(cb->ls_id, cb->lkb_id, cb->sb_status,855 cb->sb_flags, cb->res_name, cb->res_length);856 }857 858 ret = copy_result_to_user(&cb->ua,859 test_bit(DLM_PROC_FLAGS_COMPAT, &proc->flags),860 cb->flags, cb->mode, cb->copy_lvb, buf, count);861 dlm_free_cb(cb);862 return ret;863}864 865static __poll_t device_poll(struct file *file, poll_table *wait)866{867 struct dlm_user_proc *proc = file->private_data;868 869 poll_wait(file, &proc->wait, wait);870 871 spin_lock_bh(&proc->asts_spin);872 if (!list_empty(&proc->asts)) {873 spin_unlock_bh(&proc->asts_spin);874 return EPOLLIN | EPOLLRDNORM;875 }876 spin_unlock_bh(&proc->asts_spin);877 return 0;878}879 880int dlm_user_daemon_available(void)881{882 /* dlm_controld hasn't started (or, has started, but not883 properly populated configfs) */884 885 if (!dlm_our_nodeid())886 return 0;887 888 /* This is to deal with versions of dlm_controld that don't889 know about the monitor device. We assume that if the890 dlm_controld was started (above), but the monitor device891 was never opened, that it's an old version. dlm_controld892 should open the monitor device before populating configfs. */893 894 if (dlm_monitor_unused)895 return 1;896 897 return atomic_read(&dlm_monitor_opened) ? 1 : 0;898}899 900static int ctl_device_open(struct inode *inode, struct file *file)901{902 file->private_data = NULL;903 return 0;904}905 906static int ctl_device_close(struct inode *inode, struct file *file)907{908 return 0;909}910 911static int monitor_device_open(struct inode *inode, struct file *file)912{913 atomic_inc(&dlm_monitor_opened);914 dlm_monitor_unused = 0;915 return 0;916}917 918static int monitor_device_close(struct inode *inode, struct file *file)919{920 if (atomic_dec_and_test(&dlm_monitor_opened))921 dlm_stop_lockspaces();922 return 0;923}924 925static const struct file_operations device_fops = {926 .open = device_open,927 .release = device_close,928 .read = device_read,929 .write = device_write,930 .poll = device_poll,931 .owner = THIS_MODULE,932 .llseek = noop_llseek,933};934 935static const struct file_operations ctl_device_fops = {936 .open = ctl_device_open,937 .release = ctl_device_close,938 .read = device_read,939 .write = device_write,940 .owner = THIS_MODULE,941 .llseek = noop_llseek,942};943 944static struct miscdevice ctl_device = {945 .name = "dlm-control",946 .fops = &ctl_device_fops,947 .minor = MISC_DYNAMIC_MINOR,948};949 950static const struct file_operations monitor_device_fops = {951 .open = monitor_device_open,952 .release = monitor_device_close,953 .owner = THIS_MODULE,954 .llseek = noop_llseek,955};956 957static struct miscdevice monitor_device = {958 .name = "dlm-monitor",959 .fops = &monitor_device_fops,960 .minor = MISC_DYNAMIC_MINOR,961};962 963int __init dlm_user_init(void)964{965 int error;966 967 atomic_set(&dlm_monitor_opened, 0);968 969 error = misc_register(&ctl_device);970 if (error) {971 log_print("misc_register failed for control device");972 goto out;973 }974 975 error = misc_register(&monitor_device);976 if (error) {977 log_print("misc_register failed for monitor device");978 misc_deregister(&ctl_device);979 }980 out:981 return error;982}983 984void dlm_user_exit(void)985{986 misc_deregister(&ctl_device);987 misc_deregister(&monitor_device);988}989 990