403 lines · c
1/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */2/******************************************************************************3 *4 * Name: actbl.h - Basic ACPI Table Definitions5 *6 * Copyright (C) 2000 - 2023, Intel Corp.7 *8 *****************************************************************************/9 10#ifndef __ACTBL_H__11#define __ACTBL_H__12 13/*******************************************************************************14 *15 * Fundamental ACPI tables16 *17 * This file contains definitions for the ACPI tables that are directly consumed18 * by ACPICA. All other tables are consumed by the OS-dependent ACPI-related19 * device drivers and other OS support code.20 *21 * The RSDP and FACS do not use the common ACPI table header. All other ACPI22 * tables use the header.23 *24 ******************************************************************************/25 26/*27 * Values for description table header signatures for tables defined in this28 * file. Useful because they make it more difficult to inadvertently type in29 * the wrong signature.30 */31#define ACPI_SIG_DSDT "DSDT" /* Differentiated System Description Table */32#define ACPI_SIG_FADT "FACP" /* Fixed ACPI Description Table */33#define ACPI_SIG_FACS "FACS" /* Firmware ACPI Control Structure */34#define ACPI_SIG_OSDT "OSDT" /* Override System Description Table */35#define ACPI_SIG_PSDT "PSDT" /* Persistent System Description Table */36#define ACPI_SIG_RSDP "RSD PTR " /* Root System Description Pointer */37#define ACPI_SIG_RSDT "RSDT" /* Root System Description Table */38#define ACPI_SIG_XSDT "XSDT" /* Extended System Description Table */39#define ACPI_SIG_SSDT "SSDT" /* Secondary System Description Table */40#define ACPI_RSDP_NAME "RSDP" /* Short name for RSDP, not signature */41#define ACPI_OEM_NAME "OEM" /* Short name for OEM, not signature */42 43/*44 * All tables and structures must be byte-packed to match the ACPI45 * specification, since the tables are provided by the system BIOS46 */47#pragma pack(1)48 49/*50 * Note: C bitfields are not used for this reason:51 *52 * "Bitfields are great and easy to read, but unfortunately the C language53 * does not specify the layout of bitfields in memory, which means they are54 * essentially useless for dealing with packed data in on-disk formats or55 * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,56 * this decision was a design error in C. Ritchie could have picked an order57 * and stuck with it." Norman Ramsey.58 * See http://stackoverflow.com/a/1053662/4166159 */60 61/*******************************************************************************62 *63 * Master ACPI Table Header. This common header is used by all ACPI tables64 * except the RSDP and FACS.65 *66 ******************************************************************************/67 68struct acpi_table_header {69 char signature[ACPI_NAMESEG_SIZE]; /* ASCII table signature */70 u32 length; /* Length of table in bytes, including this header */71 u8 revision; /* ACPI Specification minor version number */72 u8 checksum; /* To make sum of entire table == 0 */73 char oem_id[ACPI_OEM_ID_SIZE]; /* ASCII OEM identification */74 char oem_table_id[ACPI_OEM_TABLE_ID_SIZE]; /* ASCII OEM table identification */75 u32 oem_revision; /* OEM revision number */76 char asl_compiler_id[ACPI_NAMESEG_SIZE]; /* ASCII ASL compiler vendor ID */77 u32 asl_compiler_revision; /* ASL compiler version */78};79 80/*******************************************************************************81 *82 * GAS - Generic Address Structure (ACPI 2.0+)83 *84 * Note: Since this structure is used in the ACPI tables, it is byte aligned.85 * If misaligned access is not supported by the hardware, accesses to the86 * 64-bit Address field must be performed with care.87 *88 ******************************************************************************/89 90struct acpi_generic_address {91 u8 space_id; /* Address space where struct or register exists */92 u8 bit_width; /* Size in bits of given register */93 u8 bit_offset; /* Bit offset within the register */94 u8 access_width; /* Minimum Access size (ACPI 3.0) */95 u64 address; /* 64-bit address of struct or register */96};97 98/*******************************************************************************99 *100 * RSDP - Root System Description Pointer (Signature is "RSD PTR ")101 * Version 2102 *103 ******************************************************************************/104 105struct acpi_table_rsdp {106 char signature[8]; /* ACPI signature, contains "RSD PTR " */107 u8 checksum; /* ACPI 1.0 checksum */108 char oem_id[ACPI_OEM_ID_SIZE]; /* OEM identification */109 u8 revision; /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */110 u32 rsdt_physical_address; /* 32-bit physical address of the RSDT */111 u32 length; /* Table length in bytes, including header (ACPI 2.0+) */112 u64 xsdt_physical_address; /* 64-bit physical address of the XSDT (ACPI 2.0+) */113 u8 extended_checksum; /* Checksum of entire table (ACPI 2.0+) */114 u8 reserved[3]; /* Reserved, must be zero */115};116 117/* Standalone struct for the ACPI 1.0 RSDP */118 119struct acpi_rsdp_common {120 char signature[8];121 u8 checksum;122 char oem_id[ACPI_OEM_ID_SIZE];123 u8 revision;124 u32 rsdt_physical_address;125};126 127/* Standalone struct for the extended part of the RSDP (ACPI 2.0+) */128 129struct acpi_rsdp_extension {130 u32 length;131 u64 xsdt_physical_address;132 u8 extended_checksum;133 u8 reserved[3];134};135 136/*******************************************************************************137 *138 * RSDT/XSDT - Root System Description Tables139 * Version 1 (both)140 *141 ******************************************************************************/142 143struct acpi_table_rsdt {144 struct acpi_table_header header; /* Common ACPI table header */145 u32 table_offset_entry[1]; /* Array of pointers to ACPI tables */146};147 148struct acpi_table_xsdt {149 struct acpi_table_header header; /* Common ACPI table header */150 u64 table_offset_entry[1]; /* Array of pointers to ACPI tables */151};152 153#define ACPI_RSDT_ENTRY_SIZE (sizeof (u32))154#define ACPI_XSDT_ENTRY_SIZE (sizeof (u64))155 156/*******************************************************************************157 *158 * FACS - Firmware ACPI Control Structure (FACS)159 *160 ******************************************************************************/161 162struct acpi_table_facs {163 char signature[4]; /* ASCII table signature */164 u32 length; /* Length of structure, in bytes */165 u32 hardware_signature; /* Hardware configuration signature */166 u32 firmware_waking_vector; /* 32-bit physical address of the Firmware Waking Vector */167 u32 global_lock; /* Global Lock for shared hardware resources */168 u32 flags;169 u64 xfirmware_waking_vector; /* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */170 u8 version; /* Version of this table (ACPI 2.0+) */171 u8 reserved[3]; /* Reserved, must be zero */172 u32 ospm_flags; /* Flags to be set by OSPM (ACPI 4.0) */173 u8 reserved1[24]; /* Reserved, must be zero */174};175 176/* Masks for global_lock flag field above */177 178#define ACPI_GLOCK_PENDING (1) /* 00: Pending global lock ownership */179#define ACPI_GLOCK_OWNED (1<<1) /* 01: Global lock is owned */180 181/* Masks for Flags field above */182 183#define ACPI_FACS_S4_BIOS_PRESENT (1) /* 00: S4BIOS support is present */184#define ACPI_FACS_64BIT_WAKE (1<<1) /* 01: 64-bit wake vector supported (ACPI 4.0) */185 186/* Masks for ospm_flags field above */187 188#define ACPI_FACS_64BIT_ENVIRONMENT (1) /* 00: 64-bit wake environment is required (ACPI 4.0) */189 190/*******************************************************************************191 *192 * FADT - Fixed ACPI Description Table (Signature "FACP")193 * Version 6194 *195 ******************************************************************************/196 197/* Fields common to all versions of the FADT */198 199struct acpi_table_fadt {200 struct acpi_table_header header; /* Common ACPI table header */201 u32 facs; /* 32-bit physical address of FACS */202 u32 dsdt; /* 32-bit physical address of DSDT */203 u8 model; /* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */204 u8 preferred_profile; /* Conveys preferred power management profile to OSPM. */205 u16 sci_interrupt; /* System vector of SCI interrupt */206 u32 smi_command; /* 32-bit Port address of SMI command port */207 u8 acpi_enable; /* Value to write to SMI_CMD to enable ACPI */208 u8 acpi_disable; /* Value to write to SMI_CMD to disable ACPI */209 u8 s4_bios_request; /* Value to write to SMI_CMD to enter S4BIOS state */210 u8 pstate_control; /* Processor performance state control */211 u32 pm1a_event_block; /* 32-bit port address of Power Mgt 1a Event Reg Blk */212 u32 pm1b_event_block; /* 32-bit port address of Power Mgt 1b Event Reg Blk */213 u32 pm1a_control_block; /* 32-bit port address of Power Mgt 1a Control Reg Blk */214 u32 pm1b_control_block; /* 32-bit port address of Power Mgt 1b Control Reg Blk */215 u32 pm2_control_block; /* 32-bit port address of Power Mgt 2 Control Reg Blk */216 u32 pm_timer_block; /* 32-bit port address of Power Mgt Timer Ctrl Reg Blk */217 u32 gpe0_block; /* 32-bit port address of General Purpose Event 0 Reg Blk */218 u32 gpe1_block; /* 32-bit port address of General Purpose Event 1 Reg Blk */219 u8 pm1_event_length; /* Byte Length of ports at pm1x_event_block */220 u8 pm1_control_length; /* Byte Length of ports at pm1x_control_block */221 u8 pm2_control_length; /* Byte Length of ports at pm2_control_block */222 u8 pm_timer_length; /* Byte Length of ports at pm_timer_block */223 u8 gpe0_block_length; /* Byte Length of ports at gpe0_block */224 u8 gpe1_block_length; /* Byte Length of ports at gpe1_block */225 u8 gpe1_base; /* Offset in GPE number space where GPE1 events start */226 u8 cst_control; /* Support for the _CST object and C-States change notification */227 u16 c2_latency; /* Worst case HW latency to enter/exit C2 state */228 u16 c3_latency; /* Worst case HW latency to enter/exit C3 state */229 u16 flush_size; /* Processor memory cache line width, in bytes */230 u16 flush_stride; /* Number of flush strides that need to be read */231 u8 duty_offset; /* Processor duty cycle index in processor P_CNT reg */232 u8 duty_width; /* Processor duty cycle value bit width in P_CNT register */233 u8 day_alarm; /* Index to day-of-month alarm in RTC CMOS RAM */234 u8 month_alarm; /* Index to month-of-year alarm in RTC CMOS RAM */235 u8 century; /* Index to century in RTC CMOS RAM */236 u16 boot_flags; /* IA-PC Boot Architecture Flags (see below for individual flags) */237 u8 reserved; /* Reserved, must be zero */238 u32 flags; /* Miscellaneous flag bits (see below for individual flags) */239 struct acpi_generic_address reset_register; /* 64-bit address of the Reset register */240 u8 reset_value; /* Value to write to the reset_register port to reset the system */241 u16 arm_boot_flags; /* ARM-Specific Boot Flags (see below for individual flags) (ACPI 5.1) */242 u8 minor_revision; /* FADT Minor Revision (ACPI 5.1) */243 u64 Xfacs; /* 64-bit physical address of FACS */244 u64 Xdsdt; /* 64-bit physical address of DSDT */245 struct acpi_generic_address xpm1a_event_block; /* 64-bit Extended Power Mgt 1a Event Reg Blk address */246 struct acpi_generic_address xpm1b_event_block; /* 64-bit Extended Power Mgt 1b Event Reg Blk address */247 struct acpi_generic_address xpm1a_control_block; /* 64-bit Extended Power Mgt 1a Control Reg Blk address */248 struct acpi_generic_address xpm1b_control_block; /* 64-bit Extended Power Mgt 1b Control Reg Blk address */249 struct acpi_generic_address xpm2_control_block; /* 64-bit Extended Power Mgt 2 Control Reg Blk address */250 struct acpi_generic_address xpm_timer_block; /* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */251 struct acpi_generic_address xgpe0_block; /* 64-bit Extended General Purpose Event 0 Reg Blk address */252 struct acpi_generic_address xgpe1_block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */253 struct acpi_generic_address sleep_control; /* 64-bit Sleep Control register (ACPI 5.0) */254 struct acpi_generic_address sleep_status; /* 64-bit Sleep Status register (ACPI 5.0) */255 u64 hypervisor_id; /* Hypervisor Vendor ID (ACPI 6.0) */256};257 258/* Masks for FADT IA-PC Boot Architecture Flags (boot_flags) [Vx]=Introduced in this FADT revision */259 260#define ACPI_FADT_LEGACY_DEVICES (1) /* 00: [V2] System has LPC or ISA bus devices */261#define ACPI_FADT_8042 (1<<1) /* 01: [V3] System has an 8042 controller on port 60/64 */262#define ACPI_FADT_NO_VGA (1<<2) /* 02: [V4] It is not safe to probe for VGA hardware */263#define ACPI_FADT_NO_MSI (1<<3) /* 03: [V4] Message Signaled Interrupts (MSI) must not be enabled */264#define ACPI_FADT_NO_ASPM (1<<4) /* 04: [V4] PCIe ASPM control must not be enabled */265#define ACPI_FADT_NO_CMOS_RTC (1<<5) /* 05: [V5] No CMOS real-time clock present */266 267#define FADT2_REVISION_ID 3268 269/* Masks for FADT ARM Boot Architecture Flags (arm_boot_flags) ACPI 5.1 */270 271#define ACPI_FADT_PSCI_COMPLIANT (1) /* 00: [V5+] PSCI 0.2+ is implemented */272#define ACPI_FADT_PSCI_USE_HVC (1<<1) /* 01: [V5+] HVC must be used instead of SMC as the PSCI conduit */273 274/* Masks for FADT flags */275 276#define ACPI_FADT_WBINVD (1) /* 00: [V1] The WBINVD instruction works properly */277#define ACPI_FADT_WBINVD_FLUSH (1<<1) /* 01: [V1] WBINVD flushes but does not invalidate caches */278#define ACPI_FADT_C1_SUPPORTED (1<<2) /* 02: [V1] All processors support C1 state */279#define ACPI_FADT_C2_MP_SUPPORTED (1<<3) /* 03: [V1] C2 state works on MP system */280#define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: [V1] Power button is handled as a control method device */281#define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: [V1] Sleep button is handled as a control method device */282#define ACPI_FADT_FIXED_RTC (1<<6) /* 06: [V1] RTC wakeup status is not in fixed register space */283#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: [V1] RTC alarm can wake system from S4 */284#define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */285#define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: [V1] Docking supported */286#define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: [V2] System reset via the FADT RESET_REG supported */287#define ACPI_FADT_SEALED_CASE (1<<11) /* 11: [V3] No internal expansion capabilities and case is sealed */288#define ACPI_FADT_HEADLESS (1<<12) /* 12: [V3] No local video capabilities or local input devices */289#define ACPI_FADT_SLEEP_TYPE (1<<13) /* 13: [V3] Must execute native instruction after writing SLP_TYPx register */290#define ACPI_FADT_PCI_EXPRESS_WAKE (1<<14) /* 14: [V4] System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */291#define ACPI_FADT_PLATFORM_CLOCK (1<<15) /* 15: [V4] OSPM should use platform-provided timer (ACPI 3.0) */292#define ACPI_FADT_S4_RTC_VALID (1<<16) /* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */293#define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: [V4] System is compatible with remote power on (ACPI 3.0) */294#define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */295#define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local xAPICs must use physical dest mode (ACPI 3.0) */296#define ACPI_FADT_HW_REDUCED (1<<20) /* 20: [V5] ACPI hardware is not implemented (ACPI 5.0) */297#define ACPI_FADT_LOW_POWER_S0 (1<<21) /* 21: [V5] S0 power savings are equal or better than S3 (ACPI 5.0) */298 299/* Values for preferred_profile (Preferred Power Management Profiles) */300 301enum acpi_preferred_pm_profiles {302 PM_UNSPECIFIED = 0,303 PM_DESKTOP = 1,304 PM_MOBILE = 2,305 PM_WORKSTATION = 3,306 PM_ENTERPRISE_SERVER = 4,307 PM_SOHO_SERVER = 5,308 PM_APPLIANCE_PC = 6,309 PM_PERFORMANCE_SERVER = 7,310 PM_TABLET = 8,311 NR_PM_PROFILES = 9312};313 314/* Values for sleep_status and sleep_control registers (V5+ FADT) */315 316#define ACPI_X_WAKE_STATUS 0x80317#define ACPI_X_SLEEP_TYPE_MASK 0x1C318#define ACPI_X_SLEEP_TYPE_POSITION 0x02319#define ACPI_X_SLEEP_ENABLE 0x20320 321/* Reset to default packing */322 323#pragma pack()324 325/*326 * Internal table-related structures327 */328union acpi_name_union {329 u32 integer;330 char ascii[4];331};332 333/* Internal ACPI Table Descriptor. One per ACPI table. */334 335struct acpi_table_desc {336 acpi_physical_address address;337 struct acpi_table_header *pointer;338 u32 length; /* Length fixed at 32 bits (fixed in table header) */339 union acpi_name_union signature;340 acpi_owner_id owner_id;341 u8 flags;342 u16 validation_count;343};344 345/*346 * Maximum value of the validation_count field in struct acpi_table_desc.347 * When reached, validation_count cannot be changed any more and the table will348 * be permanently regarded as validated.349 *350 * This is to prevent situations in which unbalanced table get/put operations351 * may cause premature table unmapping in the OS to happen.352 *353 * The maximum validation count can be defined to any value, but should be354 * greater than the maximum number of OS early stage mapping slots to avoid355 * leaking early stage table mappings to the late stage.356 */357#define ACPI_MAX_TABLE_VALIDATIONS ACPI_UINT16_MAX358 359/* Masks for Flags field above */360 361#define ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL (0) /* Virtual address, external maintained */362#define ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL (1) /* Physical address, internally mapped */363#define ACPI_TABLE_ORIGIN_INTERNAL_VIRTUAL (2) /* Virtual address, internallly allocated */364#define ACPI_TABLE_ORIGIN_MASK (3)365#define ACPI_TABLE_IS_VERIFIED (4)366#define ACPI_TABLE_IS_LOADED (8)367 368/*369 * Get the remaining ACPI tables370 */371#include <acpi/actbl1.h>372#include <acpi/actbl2.h>373#include <acpi/actbl3.h>374 375/* Macros used to generate offsets to specific table fields */376 377#define ACPI_FADT_OFFSET(f) (u16) ACPI_OFFSET (struct acpi_table_fadt, f)378 379/*380 * Sizes of the various flavors of FADT. We need to look closely381 * at the FADT length because the version number essentially tells382 * us nothing because of many BIOS bugs where the version does not383 * match the expected length. In other words, the length of the384 * FADT is the bottom line as to what the version really is.385 *386 * For reference, the values below are as follows:387 * FADT V1 size: 0x074388 * FADT V2 size: 0x084389 * FADT V3 size: 0x0F4390 * FADT V4 size: 0x0F4391 * FADT V5 size: 0x10C392 * FADT V6 size: 0x114393 */394#define ACPI_FADT_V1_SIZE (u32) (ACPI_FADT_OFFSET (flags) + 4)395#define ACPI_FADT_V2_SIZE (u32) (ACPI_FADT_OFFSET (minor_revision) + 1)396#define ACPI_FADT_V3_SIZE (u32) (ACPI_FADT_OFFSET (sleep_control))397#define ACPI_FADT_V5_SIZE (u32) (ACPI_FADT_OFFSET (hypervisor_id))398#define ACPI_FADT_V6_SIZE (u32) (sizeof (struct acpi_table_fadt))399 400#define ACPI_FADT_CONFORMANCE "ACPI 6.1 (FADT version 6)"401 402#endif /* __ACTBL_H__ */403