brintos

brintos / linux-shallow public Read only

0
0
Text · 7.1 KiB · f45f961 Raw
260 lines · c
1/* SPDX-License-Identifier: GPL-2.0-or-later */2/*3 * MIPI Display Bus Interface (DBI) LCD controller support4 *5 * Copyright 2016 Noralf Trønnes6 */7 8#ifndef __LINUX_MIPI_DBI_H9#define __LINUX_MIPI_DBI_H10 11#include <linux/mutex.h>12#include <drm/drm_device.h>13#include <drm/drm_simple_kms_helper.h>14 15struct drm_format_conv_state;16struct drm_rect;17struct gpio_desc;18struct iosys_map;19struct regulator;20struct spi_device;21 22/**23 * struct mipi_dbi - MIPI DBI interface24 */25struct mipi_dbi {26	/**27	 * @cmdlock: Command lock28	 */29	struct mutex cmdlock;30 31	/**32	 * @command: Bus specific callback executing commands.33	 */34	int (*command)(struct mipi_dbi *dbi, u8 *cmd, u8 *param, size_t num);35 36	/**37	 * @read_commands: Array of read commands terminated by a zero entry.38	 *                 Reading is disabled if this is NULL.39	 */40	const u8 *read_commands;41 42	/**43	 * @swap_bytes: Swap bytes in buffer before transfer44	 */45	bool swap_bytes;46 47	/**48	 * @reset: Optional reset gpio49	 */50	struct gpio_desc *reset;51 52	/* Type C specific */53 54	/**55	 * @spi: SPI device56	 */57	struct spi_device *spi;58 59	/**60	 * @write_memory_bpw: Bits per word used on a MIPI_DCS_WRITE_MEMORY_START transfer61	 */62	unsigned int write_memory_bpw;63 64	/**65	 * @dc: Optional D/C gpio.66	 */67	struct gpio_desc *dc;68 69	/**70	 * @tx_buf9: Buffer used for Option 1 9-bit conversion71	 */72	void *tx_buf9;73 74	/**75	 * @tx_buf9_len: Size of tx_buf9.76	 */77	size_t tx_buf9_len;78};79 80/**81 * struct mipi_dbi_dev - MIPI DBI device82 */83struct mipi_dbi_dev {84	/**85	 * @drm: DRM device86	 */87	struct drm_device drm;88 89	/**90	 * @pipe: Display pipe structure91	 */92	struct drm_simple_display_pipe pipe;93 94	/**95	 * @connector: Connector96	 */97	struct drm_connector connector;98 99	/**100	 * @mode: Fixed display mode101	 */102	struct drm_display_mode mode;103 104	/**105	 * @pixel_format: Native pixel format (DRM_FORMAT\_\*)106	 */107	u32 pixel_format;108 109	/**110	 * @tx_buf: Buffer used for transfer (copy clip rect area)111	 */112	u16 *tx_buf;113 114	/**115	 * @rotation: initial rotation in degrees Counter Clock Wise116	 */117	unsigned int rotation;118 119	/**120	 * @left_offset: Horizontal offset of the display relative to the121	 *               controller's driver array122	 */123	unsigned int left_offset;124 125	/**126	 * @top_offset: Vertical offset of the display relative to the127	 *              controller's driver array128	 */129	unsigned int top_offset;130 131	/**132	 * @backlight: backlight device (optional)133	 */134	struct backlight_device *backlight;135 136	/**137	 * @regulator: power regulator (Vdd) (optional)138	 */139	struct regulator *regulator;140 141	/**142	 * @io_regulator: I/O power regulator (Vddi) (optional)143	 */144	struct regulator *io_regulator;145 146	/**147	 * @dbi: MIPI DBI interface148	 */149	struct mipi_dbi dbi;150 151	/**152	 * @driver_private: Driver private data.153	 *                  Necessary for drivers with private data since devm_drm_dev_alloc()154	 *                  can't allocate structures that embed a structure which then again155	 *                  embeds drm_device.156	 */157	void *driver_private;158};159 160static inline struct mipi_dbi_dev *drm_to_mipi_dbi_dev(struct drm_device *drm)161{162	return container_of(drm, struct mipi_dbi_dev, drm);163}164 165int mipi_dbi_spi_init(struct spi_device *spi, struct mipi_dbi *dbi,166		      struct gpio_desc *dc);167int mipi_dbi_dev_init_with_formats(struct mipi_dbi_dev *dbidev,168				   const struct drm_simple_display_pipe_funcs *funcs,169				   const uint32_t *formats, unsigned int format_count,170				   const struct drm_display_mode *mode,171				   unsigned int rotation, size_t tx_buf_size);172int mipi_dbi_dev_init(struct mipi_dbi_dev *dbidev,173		      const struct drm_simple_display_pipe_funcs *funcs,174		      const struct drm_display_mode *mode, unsigned int rotation);175enum drm_mode_status mipi_dbi_pipe_mode_valid(struct drm_simple_display_pipe *pipe,176					      const struct drm_display_mode *mode);177void mipi_dbi_pipe_update(struct drm_simple_display_pipe *pipe,178			  struct drm_plane_state *old_state);179void mipi_dbi_enable_flush(struct mipi_dbi_dev *dbidev,180			   struct drm_crtc_state *crtc_state,181			   struct drm_plane_state *plan_state);182void mipi_dbi_pipe_disable(struct drm_simple_display_pipe *pipe);183int mipi_dbi_pipe_begin_fb_access(struct drm_simple_display_pipe *pipe,184				  struct drm_plane_state *plane_state);185void mipi_dbi_pipe_end_fb_access(struct drm_simple_display_pipe *pipe,186				 struct drm_plane_state *plane_state);187void mipi_dbi_pipe_reset_plane(struct drm_simple_display_pipe *pipe);188struct drm_plane_state *mipi_dbi_pipe_duplicate_plane_state(struct drm_simple_display_pipe *pipe);189void mipi_dbi_pipe_destroy_plane_state(struct drm_simple_display_pipe *pipe,190				       struct drm_plane_state *plane_state);191 192void mipi_dbi_hw_reset(struct mipi_dbi *dbi);193bool mipi_dbi_display_is_on(struct mipi_dbi *dbi);194int mipi_dbi_poweron_reset(struct mipi_dbi_dev *dbidev);195int mipi_dbi_poweron_conditional_reset(struct mipi_dbi_dev *dbidev);196 197u32 mipi_dbi_spi_cmd_max_speed(struct spi_device *spi, size_t len);198int mipi_dbi_spi_transfer(struct spi_device *spi, u32 speed_hz,199			  u8 bpw, const void *buf, size_t len);200 201int mipi_dbi_command_read(struct mipi_dbi *dbi, u8 cmd, u8 *val);202int mipi_dbi_command_buf(struct mipi_dbi *dbi, u8 cmd, u8 *data, size_t len);203int mipi_dbi_command_stackbuf(struct mipi_dbi *dbi, u8 cmd, const u8 *data,204			      size_t len);205int mipi_dbi_buf_copy(void *dst, struct iosys_map *src, struct drm_framebuffer *fb,206		      struct drm_rect *clip, bool swap,207		      struct drm_format_conv_state *fmtcnv_state);208 209/**210 * mipi_dbi_command - MIPI DCS command with optional parameter(s)211 * @dbi: MIPI DBI structure212 * @cmd: Command213 * @seq: Optional parameter(s)214 *215 * Send MIPI DCS command to the controller. Use mipi_dbi_command_read() for216 * get/read.217 *218 * Returns:219 * Zero on success, negative error code on failure.220 */221#define mipi_dbi_command(dbi, cmd, seq...) \222({ \223	const u8 d[] = { seq }; \224	struct device *dev = &(dbi)->spi->dev;	\225	int ret; \226	ret = mipi_dbi_command_stackbuf(dbi, cmd, d, ARRAY_SIZE(d)); \227	if (ret) \228		dev_err_ratelimited(dev, "error %d when sending command %#02x\n", ret, cmd); \229	ret; \230})231 232#ifdef CONFIG_DEBUG_FS233void mipi_dbi_debugfs_init(struct drm_minor *minor);234#else235static inline void mipi_dbi_debugfs_init(struct drm_minor *minor) {}236#endif237 238/**239 * DRM_MIPI_DBI_SIMPLE_DISPLAY_PIPE_FUNCS - Initializes struct drm_simple_display_pipe_funcs240 *                                          for MIPI-DBI devices241 * @enable_: Enable-callback implementation242 *243 * This macro initializes struct drm_simple_display_pipe_funcs with default244 * values for MIPI-DBI-based devices. The only callback that depends on the245 * hardware is @enable, for which the driver has to provide an implementation.246 * MIPI-based drivers are encouraged to use this macro for initialization.247 */248#define DRM_MIPI_DBI_SIMPLE_DISPLAY_PIPE_FUNCS(enable_) \249	.mode_valid = mipi_dbi_pipe_mode_valid, \250	.enable = (enable_), \251	.disable = mipi_dbi_pipe_disable, \252	.update = mipi_dbi_pipe_update, \253	.begin_fb_access = mipi_dbi_pipe_begin_fb_access, \254	.end_fb_access = mipi_dbi_pipe_end_fb_access, \255	.reset_plane = mipi_dbi_pipe_reset_plane, \256	.duplicate_plane_state = mipi_dbi_pipe_duplicate_plane_state, \257	.destroy_plane_state = mipi_dbi_pipe_destroy_plane_state258 259#endif /* __LINUX_MIPI_DBI_H */260