brintos

brintos / linux-shallow public Read only

0
0
Text · 10.8 KiB · 797ba2c Raw
299 lines · c
1/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */2/*3 * INET		An implementation of the TCP/IP protocol suite for the LINUX4 *		operating system.  INET is implemented using the  BSD Socket5 *		interface as the means of communication with the user level.6 *7 *		Global definitions for the INET interface module.8 *9 * Version:	@(#)if.h	1.0.2	04/18/9310 *11 * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1982-198812 *		Ross Biro13 *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>14 *15 *		This program is free software; you can redistribute it and/or16 *		modify it under the terms of the GNU General Public License17 *		as published by the Free Software Foundation; either version18 *		2 of the License, or (at your option) any later version.19 */20#ifndef _LINUX_IF_H21#define _LINUX_IF_H22 23#include <linux/libc-compat.h>          /* for compatibility with glibc */24#include <linux/types.h>		/* for "__kernel_caddr_t" et al	*/25#include <linux/socket.h>		/* for "struct sockaddr" et al	*/26#include <linux/compiler.h>		/* for "__user" et al           */27 28#ifndef __KERNEL__29#include <sys/socket.h>			/* for struct sockaddr.		*/30#endif31 32#if __UAPI_DEF_IF_IFNAMSIZ33#define	IFNAMSIZ	1634#endif /* __UAPI_DEF_IF_IFNAMSIZ */35#define	IFALIASZ	25636#define	ALTIFNAMSIZ	12837#include <linux/hdlc/ioctl.h>38 39/* For glibc compatibility. An empty enum does not compile. */40#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 || \41    __UAPI_DEF_IF_NET_DEVICE_FLAGS != 042/**43 * enum net_device_flags - &struct net_device flags44 *45 * These are the &struct net_device flags, they can be set by drivers, the46 * kernel and some can be triggered by userspace. Userspace can query and47 * set these flags using userspace utilities but there is also a sysfs48 * entry available for all dev flags which can be queried and set. These flags49 * are shared for all types of net_devices. The sysfs entries are available50 * via /sys/class/net/<dev>/flags. Flags which can be toggled through sysfs51 * are annotated below, note that only a few flags can be toggled and some52 * other flags are always preserved from the original net_device flags53 * even if you try to set them via sysfs. Flags which are always preserved54 * are kept under the flag grouping @IFF_VOLATILE. Flags which are volatile55 * are annotated below as such.56 *57 * You should have a pretty good reason to be extending these flags.58 *59 * @IFF_UP: interface is up. Can be toggled through sysfs.60 * @IFF_BROADCAST: broadcast address valid. Volatile.61 * @IFF_DEBUG: turn on debugging. Can be toggled through sysfs.62 * @IFF_LOOPBACK: is a loopback net. Volatile.63 * @IFF_POINTOPOINT: interface is has p-p link. Volatile.64 * @IFF_NOTRAILERS: avoid use of trailers. Can be toggled through sysfs.65 *	Volatile.66 * @IFF_RUNNING: interface RFC2863 OPER_UP. Volatile.67 * @IFF_NOARP: no ARP protocol. Can be toggled through sysfs. Volatile.68 * @IFF_PROMISC: receive all packets. Can be toggled through sysfs.69 * @IFF_ALLMULTI: receive all multicast packets. Can be toggled through70 *	sysfs.71 * @IFF_MASTER: master of a load balancer. Volatile.72 * @IFF_SLAVE: slave of a load balancer. Volatile.73 * @IFF_MULTICAST: Supports multicast. Can be toggled through sysfs.74 * @IFF_PORTSEL: can set media type. Can be toggled through sysfs.75 * @IFF_AUTOMEDIA: auto media select active. Can be toggled through sysfs.76 * @IFF_DYNAMIC: dialup device with changing addresses. Can be toggled77 *	through sysfs.78 * @IFF_LOWER_UP: driver signals L1 up. Volatile.79 * @IFF_DORMANT: driver signals dormant. Volatile.80 * @IFF_ECHO: echo sent packets. Volatile.81 */82enum net_device_flags {83/* for compatibility with glibc net/if.h */84#if __UAPI_DEF_IF_NET_DEVICE_FLAGS85	IFF_UP				= 1<<0,  /* sysfs */86	IFF_BROADCAST			= 1<<1,  /* volatile */87	IFF_DEBUG			= 1<<2,  /* sysfs */88	IFF_LOOPBACK			= 1<<3,  /* volatile */89	IFF_POINTOPOINT			= 1<<4,  /* volatile */90	IFF_NOTRAILERS			= 1<<5,  /* sysfs */91	IFF_RUNNING			= 1<<6,  /* volatile */92	IFF_NOARP			= 1<<7,  /* sysfs */93	IFF_PROMISC			= 1<<8,  /* sysfs */94	IFF_ALLMULTI			= 1<<9,  /* sysfs */95	IFF_MASTER			= 1<<10, /* volatile */96	IFF_SLAVE			= 1<<11, /* volatile */97	IFF_MULTICAST			= 1<<12, /* sysfs */98	IFF_PORTSEL			= 1<<13, /* sysfs */99	IFF_AUTOMEDIA			= 1<<14, /* sysfs */100	IFF_DYNAMIC			= 1<<15, /* sysfs */101#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS */102#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO103	IFF_LOWER_UP			= 1<<16, /* volatile */104	IFF_DORMANT			= 1<<17, /* volatile */105	IFF_ECHO			= 1<<18, /* volatile */106#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */107};108#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 || __UAPI_DEF_IF_NET_DEVICE_FLAGS != 0 */109 110/* for compatibility with glibc net/if.h */111#if __UAPI_DEF_IF_NET_DEVICE_FLAGS112#define IFF_UP				IFF_UP113#define IFF_BROADCAST			IFF_BROADCAST114#define IFF_DEBUG			IFF_DEBUG115#define IFF_LOOPBACK			IFF_LOOPBACK116#define IFF_POINTOPOINT			IFF_POINTOPOINT117#define IFF_NOTRAILERS			IFF_NOTRAILERS118#define IFF_RUNNING			IFF_RUNNING119#define IFF_NOARP			IFF_NOARP120#define IFF_PROMISC			IFF_PROMISC121#define IFF_ALLMULTI			IFF_ALLMULTI122#define IFF_MASTER			IFF_MASTER123#define IFF_SLAVE			IFF_SLAVE124#define IFF_MULTICAST			IFF_MULTICAST125#define IFF_PORTSEL			IFF_PORTSEL126#define IFF_AUTOMEDIA			IFF_AUTOMEDIA127#define IFF_DYNAMIC			IFF_DYNAMIC128#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS */129 130#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO131#define IFF_LOWER_UP			IFF_LOWER_UP132#define IFF_DORMANT			IFF_DORMANT133#define IFF_ECHO			IFF_ECHO134#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */135 136#define IFF_VOLATILE	(IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\137		IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)138 139#define IF_GET_IFACE	0x0001		/* for querying only */140#define IF_GET_PROTO	0x0002141 142/* For definitions see hdlc.h */143#define IF_IFACE_V35	0x1000		/* V.35 serial interface	*/144#define IF_IFACE_V24	0x1001		/* V.24 serial interface	*/145#define IF_IFACE_X21	0x1002		/* X.21 serial interface	*/146#define IF_IFACE_T1	0x1003		/* T1 telco serial interface	*/147#define IF_IFACE_E1	0x1004		/* E1 telco serial interface	*/148#define IF_IFACE_SYNC_SERIAL 0x1005	/* can't be set by software	*/149#define IF_IFACE_X21D   0x1006          /* X.21 Dual Clocking (FarSite) */150 151/* For definitions see hdlc.h */152#define IF_PROTO_HDLC	0x2000		/* raw HDLC protocol		*/153#define IF_PROTO_PPP	0x2001		/* PPP protocol			*/154#define IF_PROTO_CISCO	0x2002		/* Cisco HDLC protocol		*/155#define IF_PROTO_FR	0x2003		/* Frame Relay protocol		*/156#define IF_PROTO_FR_ADD_PVC 0x2004	/*    Create FR PVC		*/157#define IF_PROTO_FR_DEL_PVC 0x2005	/*    Delete FR PVC		*/158#define IF_PROTO_X25	0x2006		/* X.25				*/159#define IF_PROTO_HDLC_ETH 0x2007	/* raw HDLC, Ethernet emulation	*/160#define IF_PROTO_FR_ADD_ETH_PVC 0x2008	/*  Create FR Ethernet-bridged PVC */161#define IF_PROTO_FR_DEL_ETH_PVC 0x2009	/*  Delete FR Ethernet-bridged PVC */162#define IF_PROTO_FR_PVC	0x200A		/* for reading PVC status	*/163#define IF_PROTO_FR_ETH_PVC 0x200B164#define IF_PROTO_RAW    0x200C          /* RAW Socket                   */165 166/* RFC 2863 operational status */167enum {168	IF_OPER_UNKNOWN,169	IF_OPER_NOTPRESENT,170	IF_OPER_DOWN,171	IF_OPER_LOWERLAYERDOWN,172	IF_OPER_TESTING,173	IF_OPER_DORMANT,174	IF_OPER_UP,175};176 177/* link modes */178enum {179	IF_LINK_MODE_DEFAULT,180	IF_LINK_MODE_DORMANT,	/* limit upward transition to dormant */181	IF_LINK_MODE_TESTING,	/* limit upward transition to testing */182};183 184/*185 *	Device mapping structure. I'd just gone off and designed a 186 *	beautiful scheme using only loadable modules with arguments187 *	for driver options and along come the PCMCIA people 8)188 *189 *	Ah well. The get() side of this is good for WDSETUP, and it'll190 *	be handy for debugging things. The set side is fine for now and191 *	being very small might be worth keeping for clean configuration.192 */193 194/* for compatibility with glibc net/if.h */195#if __UAPI_DEF_IF_IFMAP196struct ifmap {197	unsigned long mem_start;198	unsigned long mem_end;199	unsigned short base_addr; 200	unsigned char irq;201	unsigned char dma;202	unsigned char port;203	/* 3 bytes spare */204};205#endif /* __UAPI_DEF_IF_IFMAP */206 207struct if_settings {208	unsigned int type;	/* Type of physical device or protocol */209	unsigned int size;	/* Size of the data allocated by the caller */210	union {211		/* {atm/eth/dsl}_settings anyone ? */212		raw_hdlc_proto		__user *raw_hdlc;213		cisco_proto		__user *cisco;214		fr_proto		__user *fr;215		fr_proto_pvc		__user *fr_pvc;216		fr_proto_pvc_info	__user *fr_pvc_info;217		x25_hdlc_proto		__user *x25;218 219		/* interface settings */220		sync_serial_settings	__user *sync;221		te1_settings		__user *te1;222	} ifs_ifsu;223};224 225/*226 * Interface request structure used for socket227 * ioctl's.  All interface ioctl's must have parameter228 * definitions which begin with ifr_name.  The229 * remainder may be interface specific.230 */231 232/* for compatibility with glibc net/if.h */233#if __UAPI_DEF_IF_IFREQ234struct ifreq {235#define IFHWADDRLEN	6236	union237	{238		char	ifrn_name[IFNAMSIZ];		/* if name, e.g. "en0" */239	} ifr_ifrn;240	241	union {242		struct	sockaddr ifru_addr;243		struct	sockaddr ifru_dstaddr;244		struct	sockaddr ifru_broadaddr;245		struct	sockaddr ifru_netmask;246		struct  sockaddr ifru_hwaddr;247		short	ifru_flags;248		int	ifru_ivalue;249		int	ifru_mtu;250		struct  ifmap ifru_map;251		char	ifru_slave[IFNAMSIZ];	/* Just fits the size */252		char	ifru_newname[IFNAMSIZ];253		void __user *	ifru_data;254		struct	if_settings ifru_settings;255	} ifr_ifru;256};257#endif /* __UAPI_DEF_IF_IFREQ */258 259#define ifr_name	ifr_ifrn.ifrn_name	/* interface name 	*/260#define ifr_hwaddr	ifr_ifru.ifru_hwaddr	/* MAC address 		*/261#define	ifr_addr	ifr_ifru.ifru_addr	/* address		*/262#define	ifr_dstaddr	ifr_ifru.ifru_dstaddr	/* other end of p-p lnk	*/263#define	ifr_broadaddr	ifr_ifru.ifru_broadaddr	/* broadcast address	*/264#define	ifr_netmask	ifr_ifru.ifru_netmask	/* interface net mask	*/265#define	ifr_flags	ifr_ifru.ifru_flags	/* flags		*/266#define	ifr_metric	ifr_ifru.ifru_ivalue	/* metric		*/267#define	ifr_mtu		ifr_ifru.ifru_mtu	/* mtu			*/268#define ifr_map		ifr_ifru.ifru_map	/* device map		*/269#define ifr_slave	ifr_ifru.ifru_slave	/* slave device		*/270#define	ifr_data	ifr_ifru.ifru_data	/* for use by interface	*/271#define ifr_ifindex	ifr_ifru.ifru_ivalue	/* interface index	*/272#define ifr_bandwidth	ifr_ifru.ifru_ivalue    /* link bandwidth	*/273#define ifr_qlen	ifr_ifru.ifru_ivalue	/* Queue length 	*/274#define ifr_newname	ifr_ifru.ifru_newname	/* New name		*/275#define ifr_settings	ifr_ifru.ifru_settings	/* Device/proto settings*/276 277/*278 * Structure used in SIOCGIFCONF request.279 * Used to retrieve interface configuration280 * for machine (useful for programs which281 * must know all networks accessible).282 */283 284/* for compatibility with glibc net/if.h */285#if __UAPI_DEF_IF_IFCONF286struct ifconf  {287	int	ifc_len;			/* size of buffer	*/288	union {289		char __user *ifcu_buf;290		struct ifreq __user *ifcu_req;291	} ifc_ifcu;292};293#endif /* __UAPI_DEF_IF_IFCONF */294 295#define	ifc_buf	ifc_ifcu.ifcu_buf		/* buffer address	*/296#define	ifc_req	ifc_ifcu.ifcu_req		/* array of structures	*/297 298#endif /* _LINUX_IF_H */299