8074 lines · c
1#ifndef __LINUX_NL80211_H2#define __LINUX_NL80211_H3/*4 * 802.11 netlink interface public header5 *6 * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>7 * Copyright 2008 Michael Wu <flamingice@sourmilk.net>8 * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>9 * Copyright 2008 Michael Buesch <m@bues.ch>10 * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>11 * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>12 * Copyright 2008 Colin McCabe <colin@cozybit.com>13 * Copyright 2015-2017 Intel Deutschland GmbH14 * Copyright (C) 2018-2024 Intel Corporation15 *16 * Permission to use, copy, modify, and/or distribute this software for any17 * purpose with or without fee is hereby granted, provided that the above18 * copyright notice and this permission notice appear in all copies.19 *20 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES21 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF22 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR23 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES24 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN25 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF26 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.27 *28 */29 30/*31 * This header file defines the userspace API to the wireless stack. Please32 * be careful not to break things - i.e. don't move anything around or so33 * unless you can demonstrate that it breaks neither API nor ABI.34 *35 * Additions to the API should be accompanied by actual implementations in36 * an upstream driver, so that example implementations exist in case there37 * are ever concerns about the precise semantics of the API or changes are38 * needed, and to ensure that code for dead (no longer implemented) API39 * can actually be identified and removed.40 * Nonetheless, semantics should also be documented carefully in this file.41 */42 43#include <linux/types.h>44 45#define NL80211_GENL_NAME "nl80211"46 47#define NL80211_MULTICAST_GROUP_CONFIG "config"48#define NL80211_MULTICAST_GROUP_SCAN "scan"49#define NL80211_MULTICAST_GROUP_REG "regulatory"50#define NL80211_MULTICAST_GROUP_MLME "mlme"51#define NL80211_MULTICAST_GROUP_VENDOR "vendor"52#define NL80211_MULTICAST_GROUP_NAN "nan"53#define NL80211_MULTICAST_GROUP_TESTMODE "testmode"54 55#define NL80211_EDMG_BW_CONFIG_MIN 456#define NL80211_EDMG_BW_CONFIG_MAX 1557#define NL80211_EDMG_CHANNELS_MIN 158#define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */59 60/**61 * DOC: Station handling62 *63 * Stations are added per interface, but a special case exists with VLAN64 * interfaces. When a station is bound to an AP interface, it may be moved65 * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).66 * The station is still assumed to belong to the AP interface it was added67 * to.68 *69 * Station handling varies per interface type and depending on the driver's70 * capabilities.71 *72 * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS73 * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:74 * - a setup station entry is added, not yet authorized, without any rate75 * or capability information; this just exists to avoid race conditions76 * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid77 * to add rate and capability information to the station and at the same78 * time mark it authorized.79 * - %NL80211_TDLS_ENABLE_LINK is then used80 * - after this, the only valid operation is to remove it by tearing down81 * the TDLS link (%NL80211_TDLS_DISABLE_LINK)82 *83 * TODO: need more info for other interface types84 */85 86/**87 * DOC: Frame transmission/registration support88 *89 * Frame transmission and registration support exists to allow userspace90 * management entities such as wpa_supplicant to react to management frames91 * that are not being handled by the kernel. This includes, for example,92 * certain classes of action frames that cannot be handled in the kernel93 * for various reasons.94 *95 * Frame registration is done on a per-interface basis and registrations96 * cannot be removed other than by closing the socket. It is possible to97 * specify a registration filter to register, for example, only for a98 * certain type of action frame. In particular with action frames, those99 * that userspace registers for will not be returned as unhandled by the100 * driver, so that the registered application has to take responsibility101 * for doing that.102 *103 * The type of frame that can be registered for is also dependent on the104 * driver and interface type. The frame types are advertised in wiphy105 * attributes so applications know what to expect.106 *107 * NOTE: When an interface changes type while registrations are active,108 * these registrations are ignored until the interface type is109 * changed again. This means that changing the interface type can110 * lead to a situation that couldn't otherwise be produced, but111 * any such registrations will be dormant in the sense that they112 * will not be serviced, i.e. they will not receive any frames.113 *114 * Frame transmission allows userspace to send for example the required115 * responses to action frames. It is subject to some sanity checking,116 * but many frames can be transmitted. When a frame is transmitted, its117 * status is indicated to the sending socket.118 *119 * For more technical details, see the corresponding command descriptions120 * below.121 */122 123/**124 * DOC: Virtual interface / concurrency capabilities125 *126 * Some devices are able to operate with virtual MACs; they can have127 * more than one virtual interface. The capability handling for this128 * is a bit complex though, as there may be a number of restrictions129 * on the types of concurrency that are supported.130 *131 * To start with, each device supports the interface types listed in132 * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the133 * types there no concurrency is implied.134 *135 * Once concurrency is desired, more attributes must be observed:136 * To start with, since some interface types are purely managed in137 * software, like the AP-VLAN type in mac80211 for example, there's138 * an additional list of these; they can be added at any time and139 * are only restricted by some semantic restrictions (e.g. AP-VLAN140 * cannot be added without a corresponding AP interface). This list141 * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.142 *143 * Further, the list of supported combinations is exported. This is144 * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,145 * it exports a list of "groups", and at any point in time the146 * interfaces that are currently active must fall into any one of147 * the advertised groups. Within each group, there are restrictions148 * on the number of interfaces of different types that are supported149 * and also the number of different channels, along with potentially150 * some other restrictions. See &enum nl80211_if_combination_attrs.151 *152 * All together, these attributes define the concurrency of virtual153 * interfaces that a given device supports.154 */155 156/**157 * DOC: packet coalesce support158 *159 * In most cases, host that receives IPv4 and IPv6 multicast/broadcast160 * packets does not do anything with these packets. Therefore the161 * reception of these unwanted packets causes unnecessary processing162 * and power consumption.163 *164 * Packet coalesce feature helps to reduce number of received interrupts165 * to host by buffering these packets in firmware/hardware for some166 * predefined time. Received interrupt will be generated when one of the167 * following events occurs.168 * a) Expiration of hardware timer whose expiration time is set to maximum169 * coalescing delay of matching coalesce rule.170 * b) Coalescing buffer in hardware reaches its limit.171 * c) Packet doesn't match any of the configured coalesce rules.172 *173 * User needs to configure following parameters for creating a coalesce174 * rule.175 * a) Maximum coalescing delay176 * b) List of packet patterns which needs to be matched177 * c) Condition for coalescence: pattern 'match' or 'no match'178 * Multiple such rules can be created.179 */180 181/**182 * DOC: WPA/WPA2 EAPOL handshake offload183 *184 * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers185 * can indicate they support offloading EAPOL handshakes for WPA/WPA2186 * preshared key authentication in station mode. In %NL80211_CMD_CONNECT187 * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers188 * supporting this offload may reject the %NL80211_CMD_CONNECT when no189 * preshared key material is provided, for example when that driver does190 * not support setting the temporal keys through %NL80211_CMD_NEW_KEY.191 *192 * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be193 * set by drivers indicating offload support of the PTK/GTK EAPOL194 * handshakes during 802.1X authentication in station mode. In order to195 * use the offload the %NL80211_CMD_CONNECT should have196 * %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this197 * offload may reject the %NL80211_CMD_CONNECT when the attribute flag is198 * not present.199 *200 * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag drivers201 * can indicate they support offloading EAPOL handshakes for WPA/WPA2202 * preshared key authentication in AP mode. In %NL80211_CMD_START_AP203 * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers204 * supporting this offload may reject the %NL80211_CMD_START_AP when no205 * preshared key material is provided, for example when that driver does206 * not support setting the temporal keys through %NL80211_CMD_NEW_KEY.207 *208 * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK209 * using %NL80211_CMD_SET_PMK. For offloaded FT support also210 * %NL80211_ATTR_PMKR0_NAME must be provided.211 */212 213/**214 * DOC: FILS shared key authentication offload215 *216 * FILS shared key authentication offload can be advertised by drivers by217 * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support218 * FILS shared key authentication offload should be able to construct the219 * authentication and association frames for FILS shared key authentication and220 * eventually do a key derivation as per IEEE 802.11ai. The below additional221 * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in222 * %NL80211_CMD_UPDATE_CONNECT_PARAMS.223 * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai224 * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai225 * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message226 * %NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK227 * rIK should be used to generate an authentication tag on the ERP message and228 * rMSK should be used to derive a PMKSA.229 * rIK, rMSK should be generated and keyname_nai, sequence number should be used230 * as specified in IETF RFC 6696.231 *232 * When FILS shared key authentication is completed, driver needs to provide the233 * below additional parameters to userspace, which can be either after setting234 * up a connection or after roaming.235 * %NL80211_ATTR_FILS_KEK - used for key renewal236 * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges237 * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated238 * %Nl80211_ATTR_PMK - used to update PMKSA cache in userspace239 * The PMKSA can be maintained in userspace persistently so that it can be used240 * later after reboots or wifi turn off/on also.241 *242 * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertised by a FILS243 * capable AP supporting PMK caching. It specifies the scope within which the244 * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and245 * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based246 * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with247 * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to248 * use in a FILS shared key connection with PMKSA caching.249 */250 251/**252 * DOC: SAE authentication offload253 *254 * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they255 * support offloading SAE authentication for WPA3-Personal networks in station256 * mode. Similarly @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag can be set by257 * drivers indicating the offload support in AP mode.258 *259 * The password for SAE should be specified using %NL80211_ATTR_SAE_PASSWORD in260 * %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP for station and AP mode261 * respectively.262 */263 264/**265 * DOC: VLAN offload support for setting group keys and binding STAs to VLANs266 *267 * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they268 * support offloading VLAN functionality in a manner where the driver exposes a269 * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs270 * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet271 * case. Frames received from stations that are not assigned to any VLAN are272 * delivered on the main netdev and frames to such stations can be sent through273 * that main netdev.274 *275 * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and276 * %NL80211_CMD_SET_STATION will optionally specify vlan_id using277 * %NL80211_ATTR_VLAN_ID.278 */279 280/**281 * DOC: TID configuration282 *283 * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG284 * attribute given in wiphy capabilities.285 *286 * The necessary configuration parameters are mentioned in287 * &enum nl80211_tid_config_attr and it will be passed to the288 * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG.289 *290 * If the configuration needs to be applied for specific peer then the MAC291 * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the292 * configuration will be applied for all the connected peers in the vif except293 * any peers that have peer-specific configuration for the TID by default; if294 * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer-specific values295 * will be overwritten.296 *297 * All this configuration is valid only for STA's current connection,298 * i.e., the configuration will be reset to default when the STA connects back299 * after disconnection/roaming, and this configuration will be cleared when300 * the interface goes down.301 */302 303/**304 * DOC: FILS shared key crypto offload305 *306 * This feature is applicable to drivers running in AP mode.307 *308 * FILS shared key crypto offload can be advertised by drivers by setting309 * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support310 * FILS shared key crypto offload should be able to encrypt and decrypt311 * association frames for FILS shared key authentication as per IEEE 802.11ai.312 * With this capability, for FILS key derivation, drivers depend on userspace.313 *314 * After FILS key derivation, userspace shares the FILS AAD details with the315 * driver and the driver stores the same to use in decryption of association316 * request and in encryption of association response. The below parameters317 * should be given to the driver in %NL80211_CMD_SET_FILS_AAD.318 * %NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA319 * %NL80211_ATTR_FILS_KEK - Used for encryption or decryption320 * %NL80211_ATTR_FILS_NONCES - Used for encryption or decryption321 * (STA Nonce 16 bytes followed by AP Nonce 16 bytes)322 *323 * Once the association is done, the driver cleans the FILS AAD data.324 */325 326/**327 * DOC: Multi-Link Operation328 *329 * In Multi-Link Operation, a connection between two MLDs utilizes multiple330 * links. To use this in nl80211, various commands and responses now need331 * to or will include the new %NL80211_ATTR_MLO_LINKS attribute.332 * Additionally, various commands that need to operate on a specific link333 * now need to be given the %NL80211_ATTR_MLO_LINK_ID attribute, e.g. to334 * use %NL80211_CMD_START_AP or similar functions.335 */336 337/**338 * DOC: OWE DH IE handling offload339 *340 * By setting @NL80211_EXT_FEATURE_OWE_OFFLOAD flag, drivers can indicate341 * kernel/application space to avoid DH IE handling. When this flag is342 * advertised, the driver/device will take care of DH IE inclusion and343 * processing of peer DH IE to generate PMK.344 */345 346/**347 * enum nl80211_commands - supported nl80211 commands348 *349 * @NL80211_CMD_UNSPEC: unspecified command to catch errors350 *351 * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request352 * to get a list of all present wiphys.353 * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or354 * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,355 * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,356 * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the357 * channel width; this is used for setting monitor mode channel),358 * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG,359 * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or360 * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel,361 * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward362 * compatibility only.363 * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request364 * or rename notification. Has attributes %NL80211_ATTR_WIPHY and365 * %NL80211_ATTR_WIPHY_NAME.366 * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes367 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.368 *369 * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;370 * either a dump request for all interfaces or a specific get with a371 * single %NL80211_ATTR_IFINDEX is supported.372 * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires373 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.374 * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response375 * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,376 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also377 * be sent from userspace to request creation of a new virtual interface,378 * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and379 * %NL80211_ATTR_IFNAME.380 * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes381 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from382 * userspace to request deletion of a virtual interface, then requires383 * attribute %NL80211_ATTR_IFINDEX. If multiple BSSID advertisements are384 * enabled using %NL80211_ATTR_MBSSID_CONFIG, %NL80211_ATTR_MBSSID_ELEMS,385 * and if this command is used for the transmitting interface, then all386 * the non-transmitting interfaces are deleted as well.387 *388 * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified389 * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC390 * represents peer's MLD address for MLO pairwise key. For MLO group key,391 * the link is identified by %NL80211_ATTR_MLO_LINK_ID.392 * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,393 * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.394 * For MLO connection, the link to set default key is identified by395 * %NL80211_ATTR_MLO_LINK_ID.396 * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,397 * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,398 * and %NL80211_ATTR_KEY_SEQ attributes. %NL80211_ATTR_MAC represents399 * peer's MLD address for MLO pairwise key. The link to add MLO400 * group key is identified by %NL80211_ATTR_MLO_LINK_ID.401 * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX402 * or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC represents peer's MLD address403 * for MLO pairwise key. The link to delete group key is identified by404 * %NL80211_ATTR_MLO_LINK_ID.405 *406 * @NL80211_CMD_GET_BEACON: (not used)407 * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface408 * using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL409 * attributes. For drivers that generate the beacon and probe responses410 * internally, the following attributes must be provided: %NL80211_ATTR_IE,411 * %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP.412 * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters413 * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that414 * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,415 * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,416 * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHER_SUITES_PAIRWISE,417 * %NL80211_ATTR_CIPHER_SUITE_GROUP, %NL80211_ATTR_WPA_VERSIONS,418 * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,419 * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,420 * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.421 * The channel to use can be set on the interface or be given using the422 * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the423 * attributes determining channel width.424 * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP425 * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface426 * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP427 *428 * @NL80211_CMD_GET_STATION: Get station attributes for station identified by429 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.430 * @NL80211_CMD_SET_STATION: Set station attributes for station identified by431 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.432 * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the433 * interface identified by %NL80211_ATTR_IFINDEX.434 * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC435 * or, if no MAC address given, all stations, on the interface identified436 * by %NL80211_ATTR_IFINDEX. For MLD station, MLD address is used in437 * %NL80211_ATTR_MAC. %NL80211_ATTR_MGMT_SUBTYPE and438 * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type439 * of disconnection indication should be sent to the station440 * (Deauthentication or Disassociation frame and reason code for that441 * frame). %NL80211_ATTR_MLO_LINK_ID can be used optionally to remove442 * stations connected and using at least that link as one of its links.443 *444 * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to445 * destination %NL80211_ATTR_MAC on the interface identified by446 * %NL80211_ATTR_IFINDEX.447 * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to448 * destination %NL80211_ATTR_MAC on the interface identified by449 * %NL80211_ATTR_IFINDEX.450 * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by451 * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.452 * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by453 * %NL80211_ATTR_MAC.454 * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by455 * %NL80211_ATTR_IFINDEX.456 *457 * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set458 * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device459 * has a private regulatory domain, it will be returned. Otherwise, the460 * global regdomain will be returned.461 * A device will have a private regulatory domain if it uses the462 * regulatory_hint() API. Even when a private regdomain is used the channel463 * information will still be mended according to further hints from464 * the regulatory core to help with compliance. A dump version of this API465 * is now available which will returns the global regdomain as well as466 * all private regdomains of present wiphys (for those that have it).467 * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then468 * its private regdomain is the only valid one for it. The regulatory469 * core is not used to help with compliance in this case.470 * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command471 * after being queried by the kernel. CRDA replies by sending a regulatory472 * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our473 * current alpha2 if it found a match. It also provides474 * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each475 * regulatory rule is a nested set of attributes given by476 * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and477 * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by478 * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and479 * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.480 * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain481 * to the specified ISO/IEC 3166-1 alpha2 country code. The core will482 * store this as a valid request and then query userspace for it.483 *484 * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the485 * interface identified by %NL80211_ATTR_IFINDEX486 *487 * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the488 * interface identified by %NL80211_ATTR_IFINDEX489 *490 * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The491 * interface is identified with %NL80211_ATTR_IFINDEX and the management492 * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be493 * added to the end of the specified management frame is specified with494 * %NL80211_ATTR_IE. If the command succeeds, the requested data will be495 * added to all specified management frames generated by496 * kernel/firmware/driver.497 * Note: This command has been removed and it is only reserved at this498 * point to avoid re-using existing command number. The functionality this499 * command was planned for has been provided with cleaner design with the500 * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,501 * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,502 * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.503 *504 * @NL80211_CMD_GET_SCAN: get scan results505 * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters506 * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the507 * probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to508 * specify a BSSID to scan for; if not included, the wildcard BSSID will509 * be used.510 * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to511 * NL80211_CMD_GET_SCAN and on the "scan" multicast group)512 * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,513 * partial scan results may be available514 *515 * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain516 * intervals and certain number of cycles, as specified by517 * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is518 * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,519 * scheduled scan will run in an infinite loop with the specified interval.520 * These attributes are mutually exclusive,521 * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if522 * NL80211_ATTR_SCHED_SCAN_PLANS is defined.523 * If for some reason scheduled scan is aborted by the driver, all scan524 * plans are canceled (including scan plans that did not start yet).525 * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)526 * are passed, they are used in the probe requests. For527 * broadcast, a broadcast SSID must be passed (ie. an empty528 * string). If no SSID is passed, no probe requests are sent and529 * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES,530 * if passed, define which channels should be scanned; if not531 * passed, all channels allowed for the current regulatory domain532 * are used. Extra IEs can also be passed from the userspace by533 * using the %NL80211_ATTR_IE attribute. The first cycle of the534 * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY535 * is supplied. If the device supports multiple concurrent scheduled536 * scans, it will allow such when the caller provides the flag attribute537 * %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it.538 * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if539 * scheduled scan is not running. The caller may assume that as soon540 * as the call returns, it is safe to start a new scheduled scan again.541 * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan542 * results available.543 * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has544 * stopped. The driver may issue this event at any time during a545 * scheduled scan. One reason for stopping the scan is if the hardware546 * does not support starting an association or a normal scan while running547 * a scheduled scan. This event is also sent when the548 * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface549 * is brought down while a scheduled scan was running.550 *551 * @NL80211_CMD_GET_SURVEY: get survey results, e.g. channel occupation552 * or noise level553 * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to554 * NL80211_CMD_GET_SURVEY and on the "scan" multicast group)555 *556 * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC557 * (for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK558 * (PMK is used for PTKSA derivation in case of FILS shared key offload) or559 * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,560 * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS561 * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier562 * advertised by a FILS capable AP identifying the scope of PMKSA in an563 * ESS.564 * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC565 * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,566 * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS567 * authentication. Additionally in case of SAE offload and OWE offloads568 * PMKSA entry can be deleted using %NL80211_ATTR_SSID.569 * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.570 *571 * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain572 * has been changed and provides details of the request information573 * that caused the change such as who initiated the regulatory request574 * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx575 * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if576 * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or577 * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain578 * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is579 * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on580 * to (%NL80211_ATTR_REG_ALPHA2).581 * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon582 * has been found while world roaming thus enabling active scan or583 * any mode of operation that initiates TX (beacons) on a channel584 * where we would not have been able to do either before. As an example585 * if you are world roaming (regulatory domain set to world or if your586 * driver is using a custom world roaming regulatory domain) and while587 * doing a passive scan on the 5 GHz band you find an AP there (if not588 * on a DFS channel) you will now be able to actively scan for that AP589 * or use AP mode on your card on that same channel. Note that this will590 * never be used for channels 1-11 on the 2 GHz band as they are always591 * enabled world wide. This beacon hint is only sent if your device had592 * either disabled active scanning or beaconing on a channel. We send to593 * userspace the wiphy on which we removed a restriction from594 * (%NL80211_ATTR_WIPHY) and the channel on which this occurred595 * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)596 * the beacon hint was processed.597 *598 * @NL80211_CMD_AUTHENTICATE: authentication request and notification.599 * This command is used both as a command (request to authenticate) and600 * as an event on the "mlme" multicast group indicating completion of the601 * authentication process.602 * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the603 * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and604 * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify605 * the SSID (mainly for association, but is included in authentication606 * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +607 * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequency of the608 * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the609 * authentication type. %NL80211_ATTR_IE is used to define IEs610 * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added611 * to the frame.612 * When used as an event, this reports reception of an Authentication613 * frame in station and IBSS modes when the local MLME processed the614 * frame, i.e., it was for the local STA and was received in correct615 * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the616 * MLME SAP interface (kernel providing MLME, userspace SME). The617 * included %NL80211_ATTR_FRAME attribute contains the management frame618 * (including both the header and frame body, but not FCS). This event is619 * also used to indicate if the authentication attempt timed out. In that620 * case the %NL80211_ATTR_FRAME attribute is replaced with a621 * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which622 * pending authentication timed out).623 * @NL80211_CMD_ASSOCIATE: association request and notification; like624 * NL80211_CMD_AUTHENTICATE but for Association and Reassociation625 * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,626 * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The627 * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the628 * request is for the initial association to an ESS (that attribute not629 * included) or for reassociation within the ESS (that attribute is630 * included).631 * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like632 * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to633 * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication634 * primitives).635 * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like636 * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to637 * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).638 *639 * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael640 * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the641 * event includes %NL80211_ATTR_MAC to describe the source MAC address of642 * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key643 * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and644 * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this645 * event matches with MLME-MICHAELMICFAILURE.indication() primitive646 *647 * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a648 * FREQ attribute (for the initial frequency if no peer can be found)649 * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those650 * should be fixed rather than automatically determined. Can only be651 * executed on a network interface that is UP, and fixed BSSID/FREQ652 * may be rejected. Another optional parameter is the beacon interval,653 * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not654 * given defaults to 100 TU (102.4ms).655 * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is656 * determined by the network interface.657 *658 * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute659 * to identify the device, and the TESTDATA blob attribute to pass through660 * to the driver.661 *662 * @NL80211_CMD_CONNECT: connection request and notification; this command663 * requests to connect to a specified network but without separating664 * auth and assoc steps. For this, you need to specify the SSID in a665 * %NL80211_ATTR_SSID attribute, and can optionally specify the association666 * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE,667 * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ,668 * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT,669 * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,670 * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,671 * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and672 * %NL80211_ATTR_WIPHY_FREQ_HINT.673 * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are674 * restrictions on BSS selection, i.e., they effectively prevent roaming675 * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT676 * can be included to provide a recommendation of the initial BSS while677 * allowing the driver to roam to other BSSes within the ESS and also to678 * ignore this recommendation if the indicated BSS is not ideal. Only one679 * set of BSSID,frequency parameters is used (i.e., either the enforcing680 * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict681 * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).682 * Driver shall not modify the IEs specified through %NL80211_ATTR_IE if683 * %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is684 * included, these IEs through %NL80211_ATTR_IE are specified by the user685 * space based on the best possible BSS selected. Thus, if the driver ends686 * up selecting a different BSS, it can modify these IEs accordingly (e.g.687 * userspace asks the driver to perform PMKSA caching with BSS1 and the688 * driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE689 * has to get updated with the apt PMKID).690 * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within691 * the ESS in case the device is already associated and an association with692 * a different BSS is desired.693 * Background scan period can optionally be694 * specified in %NL80211_ATTR_BG_SCAN_PERIOD,695 * if not specified default background scan configuration696 * in driver is used and if period value is 0, bg scan will be disabled.697 * This attribute is ignored if driver does not support roam scan.698 * It is also sent as an event, with the BSSID and response IEs when the699 * connection is established or failed to be established. This can be700 * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success,701 * non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the702 * event, the connection attempt failed due to not being able to initiate703 * authentication/association or not receiving a response from the AP.704 * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as705 * well to remain backwards compatible.706 * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself.707 * When a security association was established on an 802.1X network using708 * fast transition, this event should be followed by an709 * %NL80211_CMD_PORT_AUTHORIZED event.710 * Following a %NL80211_CMD_ROAM event userspace can issue711 * %NL80211_CMD_GET_SCAN in order to obtain the scan information for the712 * new BSS the card/driver roamed to.713 * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify714 * userspace that a connection was dropped by the AP or due to other715 * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and716 * %NL80211_ATTR_REASON_CODE attributes are used.717 *718 * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices719 * associated with this wiphy must be down and will follow.720 *721 * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified722 * channel for the specified amount of time. This can be used to do723 * off-channel operations like transmit a Public Action frame and wait for724 * a response while being associated to an AP on another channel.725 * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus726 * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the727 * frequency for the operation.728 * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds729 * to remain on the channel. This command is also used as an event to730 * notify when the requested duration starts (it may take a while for the731 * driver to schedule this time due to other concurrent needs for the732 * radio).733 * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)734 * that will be included with any events pertaining to this request;735 * the cookie is also used to cancel the request.736 * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a737 * pending remain-on-channel duration if the desired operation has been738 * completed prior to expiration of the originally requested duration.739 * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the740 * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to741 * uniquely identify the request.742 * This command is also used as an event to notify when a requested743 * remain-on-channel duration has expired.744 *745 * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX746 * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface747 * and @NL80211_ATTR_TX_RATES the set of allowed rates.748 *749 * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames750 * (via @NL80211_CMD_FRAME) for processing in userspace. This command751 * requires an interface index, a frame type attribute (optional for752 * backward compatibility reasons, if not given assumes action frames)753 * and a match attribute containing the first few bytes of the frame754 * that should match, e.g. a single byte for only a category match or755 * four bytes for vendor frames including the OUI. The registration756 * cannot be dropped, but is removed automatically when the netlink757 * socket is closed. Multiple registrations can be made.758 * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if759 * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which760 * case the registration can also be modified to include/exclude the761 * flag, rather than requiring unregistration to change it.762 * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for763 * backward compatibility764 * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This765 * command is used both as a request to transmit a management frame and766 * as an event indicating reception of a frame that was not processed in767 * kernel code, but is for us (i.e., which may need to be processed in a768 * user space application). %NL80211_ATTR_FRAME is used to specify the769 * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used770 * to indicate on which channel the frame is to be transmitted or was771 * received. If this channel is not the current channel (remain-on-channel772 * or the operational channel) the device will switch to the given channel773 * and transmit the frame, optionally waiting for a response for the time774 * specified using %NL80211_ATTR_DURATION. When called, this operation775 * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the776 * TX status event pertaining to the TX request.777 * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the778 * management frames at CCK rate or not in 2GHz band.779 * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA780 * counters which will be updated to the current value. This attribute781 * is used during CSA period.782 * For TX on an MLD, the frequency can be omitted and the link ID be783 * specified, or if transmitting to a known peer MLD (with MLD addresses784 * in the frame) both can be omitted and the link will be selected by785 * lower layers.786 * For RX notification, %NL80211_ATTR_RX_HW_TIMESTAMP may be included to787 * indicate the frame RX timestamp and %NL80211_ATTR_TX_HW_TIMESTAMP may788 * be included to indicate the ack TX timestamp.789 * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this790 * command may be used with the corresponding cookie to cancel the wait791 * time if it is known that it is no longer necessary. This command is792 * also sent as an event whenever the driver has completed the off-channel793 * wait time.794 * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.795 * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame796 * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies797 * the TX command and %NL80211_ATTR_FRAME includes the contents of the798 * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged799 * the frame. %NL80211_ATTR_TX_HW_TIMESTAMP may be included to indicate the800 * tx timestamp and %NL80211_ATTR_RX_HW_TIMESTAMP may be included to801 * indicate the ack RX timestamp.802 * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for803 * backward compatibility.804 *805 * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE806 * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE807 *808 * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command809 * is used to configure connection quality monitoring notification trigger810 * levels.811 * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This812 * command is used as an event to indicate the that a trigger level was813 * reached.814 * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ815 * and the attributes determining channel width) the given interface816 * (identified by %NL80211_ATTR_IFINDEX) shall operate on.817 * In case multiple channels are supported by the device, the mechanism818 * with which it switches channels is implementation-defined.819 * When a monitor interface is given, it can only switch channel while820 * no other interfaces are operating to avoid disturbing the operation821 * of any other interfaces, and other interfaces will again take822 * precedence when they are used.823 *824 * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface825 * (no longer supported).826 *827 * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform828 * multicast to unicast conversion. When enabled, all multicast packets829 * with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header)830 * will be sent out to each station once with the destination (multicast)831 * MAC address replaced by the station's MAC address. Note that this may832 * break certain expectations of the receiver, e.g. the ability to drop833 * unicast IP packets encapsulated in multicast L2 frames, or the ability834 * to not send destination unreachable messages in such cases.835 * This can only be toggled per BSS. Configure this on an interface of836 * type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces837 * (%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode.838 * If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this839 * command, the feature is disabled.840 *841 * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial842 * mesh config parameters may be given.843 * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the844 * network is determined by the network interface.845 *846 * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame847 * notification. This event is used to indicate that an unprotected848 * deauthentication frame was dropped when MFP is in use.849 * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame850 * notification. This event is used to indicate that an unprotected851 * disassociation frame was dropped when MFP is in use.852 *853 * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a854 * beacon or probe response from a compatible mesh peer. This is only855 * sent while no station information (sta_info) exists for the new peer856 * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH,857 * @NL80211_MESH_SETUP_USERSPACE_AMPE, or858 * @NL80211_MESH_SETUP_USERSPACE_MPM is set. On reception of this859 * notification, userspace may decide to create a new station860 * (@NL80211_CMD_NEW_STATION). To stop this notification from861 * reoccurring, the userspace authentication daemon may want to create the862 * new station with the AUTHENTICATED flag unset and maybe change it later863 * depending on the authentication result.864 *865 * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.866 * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.867 * Since wireless is more complex than wired ethernet, it supports868 * various triggers. These triggers can be configured through this869 * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For870 * more background information, see871 * https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN.872 * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification873 * from the driver reporting the wakeup reason. In this case, the874 * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason875 * for the wakeup, if it was caused by wireless. If it is not present876 * in the wakeup notification, the wireless device didn't cause the877 * wakeup but reports that it was woken up.878 *879 * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver880 * the necessary information for supporting GTK rekey offload. This881 * feature is typically used during WoWLAN. The configuration data882 * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and883 * contains the data in sub-attributes). After rekeying happened,884 * this command may also be sent by the driver as an MLME event to885 * inform userspace of the new replay counter.886 *887 * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace888 * of PMKSA caching candidates.889 *890 * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).891 * In addition, this can be used as an event to request userspace to take892 * actions on TDLS links (set up a new link or tear down an existing one).893 * In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested894 * operation, %NL80211_ATTR_MAC contains the peer MAC address, and895 * %NL80211_ATTR_REASON_CODE the reason code to be used (only with896 * %NL80211_TDLS_TEARDOWN).897 * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The898 * %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be899 * sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as900 * 802.11 management frames, while TDLS action codes (802.11-2012901 * 8.5.13.1) will be encapsulated and sent as data frames. The currently902 * supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES903 * and the currently supported TDLS actions codes are given in904 * &enum ieee80211_tdls_actioncode.905 *906 * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP907 * (or GO) interface (i.e. hostapd) to ask for unexpected frames to908 * implement sending deauth to stations that send unexpected class 3909 * frames. Also used as the event sent by the kernel when such a frame910 * is received.911 * For the event, the %NL80211_ATTR_MAC attribute carries the TA and912 * other attributes like the interface index are present.913 * If used as the command it must have an interface index and you can914 * only unsubscribe from the event by closing the socket. Subscription915 * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.916 *917 * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the918 * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame919 * and wasn't already in a 4-addr VLAN. The event will be sent similarly920 * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.921 *922 * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface923 * by sending a null data frame to it and reporting when the frame is924 * acknowledged. This is used to allow timing out inactive clients. Uses925 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a926 * direct reply with an %NL80211_ATTR_COOKIE that is later used to match927 * up the event with the request. The event includes the same data and928 * has %NL80211_ATTR_ACK set if the frame was ACKed.929 *930 * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from931 * other BSSes when any interfaces are in AP mode. This helps implement932 * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME933 * messages. Note that per PHY only one application may register.934 *935 * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether936 * No Acknowledgement Policy should be applied.937 *938 * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels939 * independently of the userspace SME, send this event indicating940 * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the941 * attributes determining channel width. This indication may also be942 * sent when a remotely-initiated switch (e.g., when a STA receives a CSA943 * from the remote AP) is completed;944 *945 * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch946 * has been started on an interface, regardless of the initiator947 * (ie. whether it was requested from a remote device or948 * initiated on our own). It indicates that949 * %NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ950 * after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's. The userspace may951 * decide to react to this indication by requesting other952 * interfaces to change channel as well.953 *954 * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by955 * its %NL80211_ATTR_WDEV identifier. It must have been created with956 * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the957 * P2P Device can be used for P2P operations, e.g. remain-on-channel and958 * public action frame TX.959 * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by960 * its %NL80211_ATTR_WDEV identifier.961 *962 * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to963 * notify userspace that AP has rejected the connection request from a964 * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON965 * is used for this.966 *967 * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames968 * for IBSS or MESH vif.969 *970 * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control.971 * This is to be used with the drivers advertising the support of MAC972 * address based access control. List of MAC addresses is passed in973 * %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in974 * %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it975 * is not already done. The new list will replace any existing list. Driver976 * will clear its ACL when the list of MAC addresses passed is empty. This977 * command is used in AP/P2P GO mode. Driver has to make sure to clear its978 * ACL list during %NL80211_CMD_STOP_AP.979 *980 * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once981 * a radar is detected or the channel availability scan (CAC) has finished982 * or was aborted, or a radar was detected, usermode will be notified with983 * this event. This command is also used to notify userspace about radars984 * while operating on this channel.985 * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the986 * event.987 *988 * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features,989 * i.e. features for the nl80211 protocol rather than device features.990 * Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap.991 *992 * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition993 * Information Element to the WLAN driver994 *995 * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver996 * to the supplicant. This will carry the target AP's MAC address along997 * with the relevant Information Elements. This event is used to report998 * received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE).999 *1000 * @NL80211_CMD_CRIT_PROTOCOL_START: Indicates user-space will start running1001 * a critical protocol that needs more reliability in the connection to1002 * complete.1003 *1004 * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can1005 * return back to normal.1006 *1007 * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules.1008 * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules.1009 *1010 * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the1011 * new channel information (Channel Switch Announcement - CSA)1012 * in the beacon for some time (as defined in the1013 * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the1014 * new channel. Userspace provides the new channel information (using1015 * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel1016 * width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform1017 * other station that transmission must be blocked until the channel1018 * switch is complete.1019 *1020 * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified1021 * by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in1022 * %NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in1023 * %NL80211_ATTR_VENDOR_DATA.1024 * For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is1025 * used in the wiphy data as a nested attribute containing descriptions1026 * (&struct nl80211_vendor_cmd_info) of the supported vendor commands.1027 * This may also be sent as an event with the same attributes.1028 *1029 * @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values.1030 * The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If1031 * that attribute is not included, QoS mapping is disabled. Since this1032 * QoS mapping is relevant for IP packets, it is only valid during an1033 * association. This is cleared on disassociation and AP restart.1034 *1035 * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given1036 * %NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO1037 * and %NL80211_ATTR_ADMITTED_TIME parameters.1038 * Note that the action frame handshake with the AP shall be handled by1039 * userspace via the normal management RX/TX framework, this only sets1040 * up the TX TS in the driver/device.1041 * If the admitted time attribute is not added then the request just checks1042 * if a subsequent setup could be successful, the intent is to use this to1043 * avoid setting up a session with the AP when local restrictions would1044 * make that impossible. However, the subsequent "real" setup may still1045 * fail even if the check was successful.1046 * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID1047 * and %NL80211_ATTR_MAC parameters. It isn't necessary to call this1048 * before removing a station entry entirely, or before disassociating1049 * or similar, cleanup will happen in the driver/device in this case.1050 *1051 * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to1052 * destination %NL80211_ATTR_MAC on the interface identified by1053 * %NL80211_ATTR_IFINDEX.1054 *1055 * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and1056 * bandwidth of a channel must be given.1057 * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the1058 * network is determined by the network interface.1059 *1060 * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer,1061 * identified by the %NL80211_ATTR_MAC parameter. A target channel is1062 * provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining1063 * channel width/type. The target operating class is given via1064 * %NL80211_ATTR_OPER_CLASS.1065 * The driver is responsible for continually initiating channel-switching1066 * operations and returning to the base channel for communication with the1067 * AP.1068 * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS1069 * peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel1070 * when this command completes.1071 *1072 * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used1073 * as an event to indicate changes for devices with wiphy-specific regdom1074 * management.1075 *1076 * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is1077 * not running. The driver indicates the status of the scan through1078 * cfg80211_scan_done().1079 *1080 * @NL80211_CMD_START_NAN: Start NAN operation, identified by its1081 * %NL80211_ATTR_WDEV interface. This interface must have been1082 * previously created with %NL80211_CMD_NEW_INTERFACE. After it1083 * has been started, the NAN interface will create or join a1084 * cluster. This command must have a valid1085 * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional1086 * %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is1087 * omitted or set to 0, it means don't-care and the device will1088 * decide what to use. After this command NAN functions can be1089 * added.1090 * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by1091 * its %NL80211_ATTR_WDEV interface.1092 * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined1093 * with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this1094 * operation returns the strictly positive and unique instance id1095 * (%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE)1096 * of the function upon success.1097 * Since instance ID's can be re-used, this cookie is the right1098 * way to identify the function. This will avoid races when a termination1099 * event is handled by the user space after it has already added a new1100 * function that got the same instance id from the kernel as the one1101 * which just terminated.1102 * This cookie may be used in NAN events even before the command1103 * returns, so userspace shouldn't process NAN events until it processes1104 * the response to this command.1105 * Look at %NL80211_ATTR_SOCKET_OWNER as well.1106 * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie.1107 * This command is also used as a notification sent when a NAN function is1108 * terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID1109 * and %NL80211_ATTR_COOKIE attributes.1110 * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN1111 * configuration. NAN must be operational (%NL80211_CMD_START_NAN1112 * was executed). It must contain at least one of the following1113 * attributes: %NL80211_ATTR_NAN_MASTER_PREF,1114 * %NL80211_ATTR_BANDS. If %NL80211_ATTR_BANDS is omitted, the1115 * current configuration is not changed. If it is present but1116 * set to zero, the configuration is changed to don't-care1117 * (i.e. the device can decide what to do).1118 * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported.1119 * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and1120 * %NL80211_ATTR_COOKIE.1121 *1122 * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters1123 * for subsequent roaming cases if the driver or firmware uses internal1124 * BSS selection. This command can be issued only while connected and it1125 * does not result in a change for the current association. Currently,1126 * only the %NL80211_ATTR_IE data is used and updated with this command.1127 *1128 * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R01129 * for the given authenticator address (specified with %NL80211_ATTR_MAC).1130 * When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the1131 * PMK-R0, otherwise it specifies the PMK.1132 * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously1133 * configured PMK for the authenticator address identified by1134 * %NL80211_ATTR_MAC.1135 * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates port is authorized and1136 * open for regular data traffic. For STA/P2P-client, this event is sent1137 * with AP MAC address and for AP/P2P-GO, the event carries the STA/P2P-1138 * client MAC address.1139 * Drivers that support 4 way handshake offload should send this event for1140 * STA/P2P-client after successful 4-way HS or after 802.1X FT following1141 * NL80211_CMD_CONNECT or NL80211_CMD_ROAM. Drivers using AP/P2P-GO 4-way1142 * handshake offload should send this event on successful completion of1143 * 4-way handshake with the peer (STA/P2P-client).1144 * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request1145 * and RX notification. This command is used both as a request to transmit1146 * a control port frame and as a notification that a control port frame1147 * has been received. %NL80211_ATTR_FRAME is used to specify the1148 * frame contents. The frame is the raw EAPoL data, without ethernet or1149 * 802.11 headers.1150 * For an MLD transmitter, the %NL80211_ATTR_MLO_LINK_ID may be given and1151 * its effect will depend on the destination: If the destination is known1152 * to be an MLD, this will be used as a hint to select the link to transmit1153 * the frame on. If the destination is not an MLD, this will select both1154 * the link to transmit on and the source address will be set to the link1155 * address of that link.1156 * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,1157 * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added1158 * indicating the protocol type of the received frame; whether the frame1159 * was received unencrypted and the MAC address of the peer respectively.1160 *1161 * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.1162 *1163 * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host1164 * drivers that do not define separate commands for authentication and1165 * association, but rely on user space for the authentication to happen.1166 * This interface acts both as the event request (driver to user space)1167 * to trigger the authentication and command response (userspace to1168 * driver) to indicate the authentication status.1169 *1170 * User space uses the %NL80211_CMD_CONNECT command to the host driver to1171 * trigger a connection. The host driver selects a BSS and further uses1172 * this interface to offload only the authentication part to the user1173 * space. Authentication frames are passed between the driver and user1174 * space through the %NL80211_CMD_FRAME interface. Host driver proceeds1175 * further with the association after getting successful authentication1176 * status. User space indicates the authentication status through1177 * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH1178 * command interface.1179 *1180 * Host driver sends MLD address of the AP with %NL80211_ATTR_MLD_ADDR in1181 * %NL80211_CMD_EXTERNAL_AUTH event to indicate user space to enable MLO1182 * during the authentication offload in STA mode while connecting to MLD1183 * APs. Host driver should check %NL80211_ATTR_MLO_SUPPORT flag capability1184 * in %NL80211_CMD_CONNECT to know whether the user space supports enabling1185 * MLO during the authentication offload or not.1186 * User space should enable MLO during the authentication only when it1187 * receives the AP MLD address in authentication offload request. User1188 * space shouldn't enable MLO when the authentication offload request1189 * doesn't indicate the AP MLD address even if the AP is MLO capable.1190 * User space should use %NL80211_ATTR_MLD_ADDR as peer's MLD address and1191 * interface address identified by %NL80211_ATTR_IFINDEX as self MLD1192 * address. User space and host driver to use MLD addresses in RA, TA and1193 * BSSID fields of the frames between them, and host driver translates the1194 * MLD addresses to/from link addresses based on the link chosen for the1195 * authentication.1196 *1197 * Host driver reports this status on an authentication failure to the1198 * user space through the connect result as the user space would have1199 * initiated the connection through the connect request.1200 *1201 * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's1202 * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE,1203 * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its1204 * address(specified in %NL80211_ATTR_MAC).1205 *1206 * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in1207 * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute.1208 *1209 * @NL80211_CMD_PEER_MEASUREMENT_START: start a (set of) peer measurement(s)1210 * with the given parameters, which are encapsulated in the nested1211 * %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address1212 * randomization may be enabled and configured by specifying the1213 * %NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes.1214 * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute.1215 * A u64 cookie for further %NL80211_ATTR_COOKIE use is returned in1216 * the netlink extended ack message.1217 *1218 * To cancel a measurement, close the socket that requested it.1219 *1220 * Measurement results are reported to the socket that requested the1221 * measurement using @NL80211_CMD_PEER_MEASUREMENT_RESULT when they1222 * become available, so applications must ensure a large enough socket1223 * buffer size.1224 *1225 * Depending on driver support it may or may not be possible to start1226 * multiple concurrent measurements.1227 * @NL80211_CMD_PEER_MEASUREMENT_RESULT: This command number is used for the1228 * result notification from the driver to the requesting socket.1229 * @NL80211_CMD_PEER_MEASUREMENT_COMPLETE: Notification only, indicating that1230 * the measurement completed, using the measurement cookie1231 * (%NL80211_ATTR_COOKIE).1232 *1233 * @NL80211_CMD_NOTIFY_RADAR: Notify the kernel that a radar signal was1234 * detected and reported by a neighboring device on the channel1235 * indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes1236 * determining the width and type.1237 *1238 * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to1239 * offload OWE processing to user space. This intends to support1240 * OWE AKM by the host drivers that implement SME but rely1241 * on the user space for the cryptographic/DH IE processing in AP mode.1242 *1243 * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric1244 * refreshing, is that from one mesh point we be able to send some data1245 * frames to other mesh points which are not currently selected as a1246 * primary traffic path, but which are only 1 hop away. The absence of1247 * the primary path to the chosen node makes it necessary to apply some1248 * form of marking on a chosen packet stream so that the packets can be1249 * properly steered to the selected node for testing, and not by the1250 * regular mesh path lookup. Further, the packets must be of type data1251 * so that the rate control (often embedded in firmware) is used for1252 * rate selection.1253 *1254 * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh1255 * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame1256 * content. The frame is ethernet data.1257 *1258 * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration1259 * is passed using %NL80211_ATTR_TID_CONFIG attribute.1260 *1261 * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon1262 * frame. This event is used to indicate that a received Beacon frame was1263 * dropped because it did not include a valid MME MIC while beacon1264 * protection was enabled (BIGTK configured in station mode).1265 *1266 * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control1267 * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME.1268 * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME1269 * includes the contents of the frame. %NL80211_ATTR_ACK flag is included1270 * if the recipient acknowledged the frame.1271 *1272 * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is1273 * passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to1274 * specify the wiphy index to be applied to.1275 *1276 * @NL80211_CMD_OBSS_COLOR_COLLISION: This notification is sent out whenever1277 * mac80211/drv detects a bss color collision.1278 *1279 * @NL80211_CMD_COLOR_CHANGE_REQUEST: This command is used to indicate that1280 * userspace wants to change the BSS color.1281 *1282 * @NL80211_CMD_COLOR_CHANGE_STARTED: Notify userland, that a color change has1283 * started1284 *1285 * @NL80211_CMD_COLOR_CHANGE_ABORTED: Notify userland, that the color change has1286 * been aborted1287 *1288 * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change1289 * has completed1290 *1291 * @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using -1292 * &NL80211_ATTR_MAC - for STA MAC address1293 * &NL80211_ATTR_FILS_KEK - for KEK1294 * &NL80211_ATTR_FILS_NONCES - for FILS Nonces1295 * (STA Nonce 16 bytes followed by AP Nonce 16 bytes)1296 *1297 * @NL80211_CMD_ASSOC_COMEBACK: notification about an association1298 * temporal rejection with comeback. The event includes %NL80211_ATTR_MAC1299 * to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to1300 * specify the timeout value.1301 *1302 * @NL80211_CMD_ADD_LINK: Add a new link to an interface. The1303 * %NL80211_ATTR_MLO_LINK_ID attribute is used for the new link.1304 * @NL80211_CMD_REMOVE_LINK: Remove a link from an interface. This may come1305 * without %NL80211_ATTR_MLO_LINK_ID as an easy way to remove all links1306 * in preparation for e.g. roaming to a regular (non-MLO) AP.1307 *1308 * @NL80211_CMD_ADD_LINK_STA: Add a link to an MLD station1309 * @NL80211_CMD_MODIFY_LINK_STA: Modify a link of an MLD station1310 * @NL80211_CMD_REMOVE_LINK_STA: Remove a link of an MLD station1311 *1312 * @NL80211_CMD_SET_HW_TIMESTAMP: Enable/disable HW timestamping of Timing1313 * measurement and Fine timing measurement frames. If %NL80211_ATTR_MAC1314 * is included, enable/disable HW timestamping only for frames to/from the1315 * specified MAC address. Otherwise enable/disable HW timestamping for1316 * all TM/FTM frames (including ones that were enabled with specific MAC1317 * address). If %NL80211_ATTR_HW_TIMESTAMP_ENABLED is not included, disable1318 * HW timestamping.1319 * The number of peers that HW timestamping can be enabled for concurrently1320 * is indicated by %NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS.1321 *1322 * @NL80211_CMD_LINKS_REMOVED: Notify userspace about the removal of STA MLD1323 * setup links due to AP MLD removing the corresponding affiliated APs with1324 * Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide1325 * information about the removed STA MLD setup links.1326 *1327 * @NL80211_CMD_SET_TID_TO_LINK_MAPPING: Set the TID to Link Mapping for a1328 * non-AP MLD station. The %NL80211_ATTR_MLO_TTLM_DLINK and1329 * %NL80211_ATTR_MLO_TTLM_ULINK attributes are used to specify the1330 * TID to Link mapping for downlink/uplink traffic.1331 *1332 * @NL80211_CMD_MAX: highest used command number1333 * @__NL80211_CMD_AFTER_LAST: internal use1334 */1335enum nl80211_commands {1336/* don't change the order or add anything between, this is ABI! */1337 NL80211_CMD_UNSPEC,1338 1339 NL80211_CMD_GET_WIPHY, /* can dump */1340 NL80211_CMD_SET_WIPHY,1341 NL80211_CMD_NEW_WIPHY,1342 NL80211_CMD_DEL_WIPHY,1343 1344 NL80211_CMD_GET_INTERFACE, /* can dump */1345 NL80211_CMD_SET_INTERFACE,1346 NL80211_CMD_NEW_INTERFACE,1347 NL80211_CMD_DEL_INTERFACE,1348 1349 NL80211_CMD_GET_KEY,1350 NL80211_CMD_SET_KEY,1351 NL80211_CMD_NEW_KEY,1352 NL80211_CMD_DEL_KEY,1353 1354 NL80211_CMD_GET_BEACON,1355 NL80211_CMD_SET_BEACON,1356 NL80211_CMD_START_AP,1357 NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP,1358 NL80211_CMD_STOP_AP,1359 NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP,1360 1361 NL80211_CMD_GET_STATION,1362 NL80211_CMD_SET_STATION,1363 NL80211_CMD_NEW_STATION,1364 NL80211_CMD_DEL_STATION,1365 1366 NL80211_CMD_GET_MPATH,1367 NL80211_CMD_SET_MPATH,1368 NL80211_CMD_NEW_MPATH,1369 NL80211_CMD_DEL_MPATH,1370 1371 NL80211_CMD_SET_BSS,1372 1373 NL80211_CMD_SET_REG,1374 NL80211_CMD_REQ_SET_REG,1375 1376 NL80211_CMD_GET_MESH_CONFIG,1377 NL80211_CMD_SET_MESH_CONFIG,1378 1379 NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,1380 1381 NL80211_CMD_GET_REG,1382 1383 NL80211_CMD_GET_SCAN,1384 NL80211_CMD_TRIGGER_SCAN,1385 NL80211_CMD_NEW_SCAN_RESULTS,1386 NL80211_CMD_SCAN_ABORTED,1387 1388 NL80211_CMD_REG_CHANGE,1389 1390 NL80211_CMD_AUTHENTICATE,1391 NL80211_CMD_ASSOCIATE,1392 NL80211_CMD_DEAUTHENTICATE,1393 NL80211_CMD_DISASSOCIATE,1394 1395 NL80211_CMD_MICHAEL_MIC_FAILURE,1396 1397 NL80211_CMD_REG_BEACON_HINT,1398 1399 NL80211_CMD_JOIN_IBSS,1400 NL80211_CMD_LEAVE_IBSS,1401 1402 NL80211_CMD_TESTMODE,1403 1404 NL80211_CMD_CONNECT,1405 NL80211_CMD_ROAM,1406 NL80211_CMD_DISCONNECT,1407 1408 NL80211_CMD_SET_WIPHY_NETNS,1409 1410 NL80211_CMD_GET_SURVEY,1411 NL80211_CMD_NEW_SURVEY_RESULTS,1412 1413 NL80211_CMD_SET_PMKSA,1414 NL80211_CMD_DEL_PMKSA,1415 NL80211_CMD_FLUSH_PMKSA,1416 1417 NL80211_CMD_REMAIN_ON_CHANNEL,1418 NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,1419 1420 NL80211_CMD_SET_TX_BITRATE_MASK,1421 1422 NL80211_CMD_REGISTER_FRAME,1423 NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,1424 NL80211_CMD_FRAME,1425 NL80211_CMD_ACTION = NL80211_CMD_FRAME,1426 NL80211_CMD_FRAME_TX_STATUS,1427 NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,1428 1429 NL80211_CMD_SET_POWER_SAVE,1430 NL80211_CMD_GET_POWER_SAVE,1431 1432 NL80211_CMD_SET_CQM,1433 NL80211_CMD_NOTIFY_CQM,1434 1435 NL80211_CMD_SET_CHANNEL,1436 NL80211_CMD_SET_WDS_PEER,1437 1438 NL80211_CMD_FRAME_WAIT_CANCEL,1439 1440 NL80211_CMD_JOIN_MESH,1441 NL80211_CMD_LEAVE_MESH,1442 1443 NL80211_CMD_UNPROT_DEAUTHENTICATE,1444 NL80211_CMD_UNPROT_DISASSOCIATE,1445 1446 NL80211_CMD_NEW_PEER_CANDIDATE,1447 1448 NL80211_CMD_GET_WOWLAN,1449 NL80211_CMD_SET_WOWLAN,1450 1451 NL80211_CMD_START_SCHED_SCAN,1452 NL80211_CMD_STOP_SCHED_SCAN,1453 NL80211_CMD_SCHED_SCAN_RESULTS,1454 NL80211_CMD_SCHED_SCAN_STOPPED,1455 1456 NL80211_CMD_SET_REKEY_OFFLOAD,1457 1458 NL80211_CMD_PMKSA_CANDIDATE,1459 1460 NL80211_CMD_TDLS_OPER,1461 NL80211_CMD_TDLS_MGMT,1462 1463 NL80211_CMD_UNEXPECTED_FRAME,1464 1465 NL80211_CMD_PROBE_CLIENT,1466 1467 NL80211_CMD_REGISTER_BEACONS,1468 1469 NL80211_CMD_UNEXPECTED_4ADDR_FRAME,1470 1471 NL80211_CMD_SET_NOACK_MAP,1472 1473 NL80211_CMD_CH_SWITCH_NOTIFY,1474 1475 NL80211_CMD_START_P2P_DEVICE,1476 NL80211_CMD_STOP_P2P_DEVICE,1477 1478 NL80211_CMD_CONN_FAILED,1479 1480 NL80211_CMD_SET_MCAST_RATE,1481 1482 NL80211_CMD_SET_MAC_ACL,1483 1484 NL80211_CMD_RADAR_DETECT,1485 1486 NL80211_CMD_GET_PROTOCOL_FEATURES,1487 1488 NL80211_CMD_UPDATE_FT_IES,1489 NL80211_CMD_FT_EVENT,1490 1491 NL80211_CMD_CRIT_PROTOCOL_START,1492 NL80211_CMD_CRIT_PROTOCOL_STOP,1493 1494 NL80211_CMD_GET_COALESCE,1495 NL80211_CMD_SET_COALESCE,1496 1497 NL80211_CMD_CHANNEL_SWITCH,1498 1499 NL80211_CMD_VENDOR,1500 1501 NL80211_CMD_SET_QOS_MAP,1502 1503 NL80211_CMD_ADD_TX_TS,1504 NL80211_CMD_DEL_TX_TS,1505 1506 NL80211_CMD_GET_MPP,1507 1508 NL80211_CMD_JOIN_OCB,1509 NL80211_CMD_LEAVE_OCB,1510 1511 NL80211_CMD_CH_SWITCH_STARTED_NOTIFY,1512 1513 NL80211_CMD_TDLS_CHANNEL_SWITCH,1514 NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,1515 1516 NL80211_CMD_WIPHY_REG_CHANGE,1517 1518 NL80211_CMD_ABORT_SCAN,1519 1520 NL80211_CMD_START_NAN,1521 NL80211_CMD_STOP_NAN,1522 NL80211_CMD_ADD_NAN_FUNCTION,1523 NL80211_CMD_DEL_NAN_FUNCTION,1524 NL80211_CMD_CHANGE_NAN_CONFIG,1525 NL80211_CMD_NAN_MATCH,1526 1527 NL80211_CMD_SET_MULTICAST_TO_UNICAST,1528 1529 NL80211_CMD_UPDATE_CONNECT_PARAMS,1530 1531 NL80211_CMD_SET_PMK,1532 NL80211_CMD_DEL_PMK,1533 1534 NL80211_CMD_PORT_AUTHORIZED,1535 1536 NL80211_CMD_RELOAD_REGDB,1537 1538 NL80211_CMD_EXTERNAL_AUTH,1539 1540 NL80211_CMD_STA_OPMODE_CHANGED,1541 1542 NL80211_CMD_CONTROL_PORT_FRAME,1543 1544 NL80211_CMD_GET_FTM_RESPONDER_STATS,1545 1546 NL80211_CMD_PEER_MEASUREMENT_START,1547 NL80211_CMD_PEER_MEASUREMENT_RESULT,1548 NL80211_CMD_PEER_MEASUREMENT_COMPLETE,1549 1550 NL80211_CMD_NOTIFY_RADAR,1551 1552 NL80211_CMD_UPDATE_OWE_INFO,1553 1554 NL80211_CMD_PROBE_MESH_LINK,1555 1556 NL80211_CMD_SET_TID_CONFIG,1557 1558 NL80211_CMD_UNPROT_BEACON,1559 1560 NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,1561 1562 NL80211_CMD_SET_SAR_SPECS,1563 1564 NL80211_CMD_OBSS_COLOR_COLLISION,1565 1566 NL80211_CMD_COLOR_CHANGE_REQUEST,1567 1568 NL80211_CMD_COLOR_CHANGE_STARTED,1569 NL80211_CMD_COLOR_CHANGE_ABORTED,1570 NL80211_CMD_COLOR_CHANGE_COMPLETED,1571 1572 NL80211_CMD_SET_FILS_AAD,1573 1574 NL80211_CMD_ASSOC_COMEBACK,1575 1576 NL80211_CMD_ADD_LINK,1577 NL80211_CMD_REMOVE_LINK,1578 1579 NL80211_CMD_ADD_LINK_STA,1580 NL80211_CMD_MODIFY_LINK_STA,1581 NL80211_CMD_REMOVE_LINK_STA,1582 1583 NL80211_CMD_SET_HW_TIMESTAMP,1584 1585 NL80211_CMD_LINKS_REMOVED,1586 1587 NL80211_CMD_SET_TID_TO_LINK_MAPPING,1588 1589 /* add new commands above here */1590 1591 /* used to define NL80211_CMD_MAX below */1592 __NL80211_CMD_AFTER_LAST,1593 NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 11594};1595 1596/*1597 * Allow user space programs to use #ifdef on new commands by defining them1598 * here1599 */1600#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS1601#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE1602#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE1603#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE1604#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE1605#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE1606#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE1607#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT1608 1609#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS1610 1611/* source-level API compatibility */1612#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG1613#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG1614#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE1615 1616/**1617 * enum nl80211_attrs - nl80211 netlink attributes1618 *1619 * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors1620 *1621 * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.1622 * /sys/class/ieee80211/<phyname>/index1623 * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)1624 * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters1625 * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz,1626 * defines the channel together with the (deprecated)1627 * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes1628 * %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ11629 * and %NL80211_ATTR_CENTER_FREQ21630 * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values1631 * of &enum nl80211_chan_width, describing the channel width. See the1632 * documentation of the enum for more information.1633 * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the1634 * channel, used for anything but 20 MHz bandwidth. In S1G this is the1635 * operating channel center frequency.1636 * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the1637 * channel, used only for 80+80 MHz bandwidth1638 * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ1639 * if HT20 or HT40 are to be used (i.e., HT disabled if not included):1640 * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including1641 * this attribute)1642 * NL80211_CHAN_HT20 = HT20 only1643 * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel1644 * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel1645 * This attribute is now deprecated.1646 * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is1647 * less than or equal to the RTS threshold; allowed range: 1..255;1648 * dot11ShortRetryLimit; u81649 * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is1650 * greater than the RTS threshold; allowed range: 1..255;1651 * dot11ShortLongLimit; u81652 * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum1653 * length in octets for frames; allowed range: 256..8000, disable1654 * fragmentation with (u32)-1; dot11FragmentationThreshold; u321655 * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length1656 * larger than or equal to this use RTS/CTS handshake); allowed range:1657 * 0..65536, disable with (u32)-1; dot11RTSThreshold; u321658 * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.111659 * section 7.3.2.9; dot11CoverageClass; u81660 *1661 * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on1662 * @NL80211_ATTR_IFNAME: network interface name1663 * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype1664 *1665 * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices1666 * that don't have a netdev (u64)1667 *1668 * @NL80211_ATTR_MAC: MAC address (various uses)1669 *1670 * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of1671 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC1672 * keys1673 * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)1674 * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.111675 * section 7.3.2.25.1, e.g. 0x000FAC04)1676 * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and1677 * CCMP keys, each six bytes in little endian1678 * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key1679 * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the1680 * default management key1681 * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or1682 * other commands, indicates which pairwise cipher suites are used1683 * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or1684 * other commands, indicates which group cipher suite is used1685 *1686 * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU1687 * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing1688 * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE1689 * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE1690 *1691 * @NL80211_ATTR_STA_AID: Association ID for the station (u16)1692 * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of1693 * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)1694 * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by1695 * IEEE 802.11 7.3.1.6 (u16).1696 * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported1697 * rates as defined by IEEE 802.11 7.3.2.2 but without the length1698 * restriction (at most %NL80211_MAX_SUPP_RATES).1699 * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station1700 * to, or the AP interface the station was originally added to.1701 * @NL80211_ATTR_STA_INFO: information about a station, part of station info1702 * given for %NL80211_CMD_GET_STATION, nested attribute containing1703 * info as possible, see &enum nl80211_sta_info.1704 *1705 * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,1706 * consisting of a nested array.1707 *1708 * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).1709 * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link1710 * (see &enum nl80211_plink_action).1711 * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.1712 * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path1713 * info given for %NL80211_CMD_GET_MPATH, nested attribute described at1714 * &enum nl80211_mpath_info.1715 *1716 * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of1717 * &enum nl80211_mntr_flags.1718 *1719 * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the1720 * current regulatory domain should be set to or is already set to.1721 * For example, 'CR', for Costa Rica. This attribute is used by the kernel1722 * to query the CRDA to retrieve one regulatory domain. This attribute can1723 * also be used by userspace to query the kernel for the currently set1724 * regulatory domain. We chose an alpha2 as that is also used by the1725 * IEEE-802.11 country information element to identify a country.1726 * Users can also simply ask the wireless core to set regulatory domain1727 * to a specific alpha2.1728 * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory1729 * rules.1730 *1731 * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)1732 * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled1733 * (u8, 0 or 1)1734 * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled1735 * (u8, 0 or 1)1736 * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic1737 * rates in format defined by IEEE 802.11 7.3.2.2 but without the length1738 * restriction (at most %NL80211_MAX_SUPP_RATES).1739 *1740 * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from1741 * association request when used with NL80211_CMD_NEW_STATION)1742 *1743 * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all1744 * supported interface types, each a flag attribute with the number1745 * of the interface mode.1746 *1747 * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for1748 * %NL80211_CMD_SET_MGMT_EXTRA_IE.1749 *1750 * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with1751 * %NL80211_CMD_SET_MGMT_EXTRA_IE).1752 *1753 * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with1754 * a single scan request, a wiphy attribute.1755 * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can1756 * scan with a single scheduled scan request, a wiphy attribute.1757 * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements1758 * that can be added to a scan request1759 * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information1760 * elements that can be added to a scheduled scan request1761 * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be1762 * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.1763 *1764 * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)1765 * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive1766 * scanning and include a zero-length SSID (wildcard) for wildcard scan1767 * @NL80211_ATTR_BSS: scan result BSS1768 *1769 * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain1770 * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*1771 * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently1772 * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)1773 *1774 * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies1775 * an array of command numbers (i.e. a mapping index to command number)1776 * that the driver for the given wiphy supports.1777 *1778 * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header1779 * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and1780 * NL80211_CMD_ASSOCIATE events1781 * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)1782 * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,1783 * represented as a u321784 * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and1785 * %NL80211_CMD_DISASSOCIATE, u161786 *1787 * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as1788 * a u321789 *1790 * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change1791 * due to considerations from a beacon hint. This attribute reflects1792 * the state of the channel _before_ the beacon hint processing. This1793 * attributes consists of a nested attribute containing1794 * NL80211_FREQUENCY_ATTR_*1795 * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change1796 * due to considerations from a beacon hint. This attribute reflects1797 * the state of the channel _after_ the beacon hint processing. This1798 * attributes consists of a nested attribute containing1799 * NL80211_FREQUENCY_ATTR_*1800 *1801 * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported1802 * cipher suites1803 *1804 * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look1805 * for other networks on different channels1806 *1807 * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this1808 * is used, e.g., with %NL80211_CMD_AUTHENTICATE event1809 *1810 * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is1811 * used for the association (&enum nl80211_mfp, represented as a u32);1812 * this attribute can be used with %NL80211_CMD_ASSOCIATE and1813 * %NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for1814 * %NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it1815 * must have decided whether to use management frame protection or not.1816 * Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will1817 * let the driver (or the firmware) decide whether to use MFP or not.1818 *1819 * @NL80211_ATTR_STA_FLAGS2: Attribute containing a1820 * &struct nl80211_sta_flag_update.1821 *1822 * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls1823 * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in1824 * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE1825 * request, the driver will assume that the port is unauthorized until1826 * authorized by user space. Otherwise, port is marked authorized by1827 * default in station mode.1828 * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the1829 * ethertype that will be used for key negotiation. It can be1830 * specified with the associate and connect commands. If it is not1831 * specified, the value defaults to 0x888E (PAE, 802.1X). This1832 * attribute is also used as a flag in the wiphy information to1833 * indicate that protocols other than PAE are supported.1834 * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with1835 * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom1836 * ethertype frames used for key negotiation must not be encrypted.1837 * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control1838 * port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE)1839 * will be sent directly to the network interface or sent via the NL802111840 * socket. If this attribute is missing, then legacy behavior of sending1841 * control port frames directly to the network interface is used. If the1842 * flag is included, then control port frames are sent over NL80211 instead1843 * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is1844 * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER1845 * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth1846 * frames are not forwarded over the control port.1847 *1848 * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.1849 * We recommend using nested, driver-specific attributes within this.1850 *1851 * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT1852 * event was due to the AP disconnecting the station, and not due to1853 * a local disconnect request.1854 * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT1855 * event (u16)1856 * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating1857 * that protected APs should be used. This is also used with NEW_BEACON to1858 * indicate that the BSS is to use protection.1859 *1860 * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to1861 * indicate which WPA version(s) the AP we want to associate with is using1862 * (a u32 with flags from &enum nl80211_wpa_versions).1863 * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to1864 * indicate which key management algorithm(s) to use (an array of u32).1865 * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY,1866 * indicating the supported AKM suites, intended for specific drivers which1867 * implement SME and have constraints on which AKMs are supported and also1868 * the cases where an AKM support is offloaded to the driver/firmware.1869 * If there is no such notification from the driver, user space should1870 * assume the driver supports all the AKM suites.1871 *1872 * @NL80211_ATTR_REQ_IE: (Re)association request information elements as1873 * sent out by the card, for ROAM and successful CONNECT events.1874 * @NL80211_ATTR_RESP_IE: (Re)association response information elements as1875 * sent by peer, for ROAM and successful CONNECT events.1876 *1877 * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT1878 * commands to specify a request to reassociate within an ESS, i.e., to use1879 * Reassociate Request frame (with the value of this attribute in the1880 * Current AP address field) instead of Association Request frame which is1881 * used for the initial association to an ESS.1882 *1883 * @NL80211_ATTR_KEY: key information in a nested attribute with1884 * %NL80211_KEY_* sub-attributes1885 * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()1886 * and join_ibss(), key information is in a nested attribute each1887 * with %NL80211_KEY_* sub-attributes1888 *1889 * @NL80211_ATTR_PID: Process ID of a network namespace.1890 * @NL80211_ATTR_NETNS_FD: File descriptor of a network namespace.1891 *1892 * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for1893 * dumps. This number increases whenever the object list being1894 * dumped changes, and as such userspace can verify that it has1895 * obtained a complete and consistent snapshot by verifying that1896 * all dump messages contain the same generation number. If it1897 * changed then the list changed and the dump should be repeated1898 * completely from scratch.1899 *1900 * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface1901 *1902 * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of1903 * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute1904 * containing info as possible, see &enum survey_info.1905 *1906 * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.1907 * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can1908 * cache, a wiphy attribute.1909 *1910 * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.1911 * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that1912 * specifies the maximum duration that can be requested with the1913 * remain-on-channel operation, in milliseconds, u32.1914 *1915 * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.1916 *1917 * @NL80211_ATTR_TX_RATES: Nested set of attributes1918 * (enum nl80211_tx_rate_attributes) describing TX rates per band. The1919 * enum nl80211_band value is used as the index (nla_type() of the nested1920 * data. If a band is not included, it will be configured to allow all1921 * rates based on negotiated supported rates information. This attribute1922 * is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP,1923 * and joining mesh networks (not IBSS yet). In the later case, it must1924 * specify just a single bitrate, which is to be used for the beacon.1925 * The driver must also specify support for this with the extended1926 * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,1927 * NL80211_EXT_FEATURE_BEACON_RATE_HT,1928 * NL80211_EXT_FEATURE_BEACON_RATE_VHT and1929 * NL80211_EXT_FEATURE_BEACON_RATE_HE.1930 *1931 * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain1932 * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.1933 * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the1934 * @NL80211_CMD_REGISTER_FRAME command.1935 * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a1936 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing1937 * information about which frame types can be transmitted with1938 * %NL80211_CMD_FRAME.1939 * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a1940 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing1941 * information about which frame types can be registered for RX.1942 *1943 * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was1944 * acknowledged by the recipient.1945 * @NL80211_ATTR_ACK_SIGNAL: Station's ack signal strength (s32)1946 *1947 * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.1948 *1949 * @NL80211_ATTR_CQM: connection quality monitor configuration in a1950 * nested attribute with %NL80211_ATTR_CQM_* sub-attributes.1951 *1952 * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command1953 * is requesting a local authentication/association state change without1954 * invoking actual management frame exchange. This can be used with1955 * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,1956 * NL80211_CMD_DISASSOCIATE.1957 *1958 * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations1959 * connected to this BSS.1960 *1961 * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See1962 * &enum nl80211_tx_power_setting for possible values.1963 * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.1964 * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING1965 * for non-automatic settings.1966 *1967 * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly1968 * means support for per-station GTKs.1969 *1970 * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.1971 * This can be used to mask out antennas which are not attached or should1972 * not be used for transmitting. If an antenna is not selected in this1973 * bitmap the hardware is not allowed to transmit on this antenna.1974 *1975 * Each bit represents one antenna, starting with antenna 1 at the first1976 * bit. Depending on which antennas are selected in the bitmap, 802.11n1977 * drivers can derive which chainmasks to use (if all antennas belonging to1978 * a particular chain are disabled this chain should be disabled) and if1979 * a chain has diversity antennas whether diversity should be used or not.1980 * HT capabilities (STBC, TX Beamforming, Antenna selection) can be1981 * derived from the available chains after applying the antenna mask.1982 * Non-802.11n drivers can derive whether to use diversity or not.1983 * Drivers may reject configurations or RX/TX mask combinations they cannot1984 * support by returning -EINVAL.1985 *1986 * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.1987 * This can be used to mask out antennas which are not attached or should1988 * not be used for receiving. If an antenna is not selected in this bitmap1989 * the hardware should not be configured to receive on this antenna.1990 * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.1991 *1992 * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available1993 * for configuration as TX antennas via the above parameters.1994 *1995 * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available1996 * for configuration as RX antennas via the above parameters.1997 *1998 * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS1999 *2000 * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be2001 * transmitted on another channel when the channel given doesn't match2002 * the current channel. If the current channel doesn't match and this2003 * flag isn't set, the frame will be rejected. This is also used as an2004 * nl80211 capability flag.2005 *2006 * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16)2007 *2008 * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags2009 * attributes, specifying what a key should be set as default as.2010 * See &enum nl80211_key_default_types.2011 *2012 * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be2013 * changed once the mesh is active.2014 * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute2015 * containing attributes from &enum nl80211_meshconf_params.2016 * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver2017 * allows auth frames in a mesh to be passed to userspace for processing via2018 * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.2019 * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in2020 * &enum nl80211_plink_state. Used when userspace is driving the peer link2021 * management state machine. @NL80211_MESH_SETUP_USERSPACE_AMPE or2022 * @NL80211_MESH_SETUP_USERSPACE_MPM must be enabled.2023 *2024 * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy2025 * capabilities, the supported WoWLAN triggers2026 * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to2027 * indicate which WoW triggers should be enabled. This is also2028 * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN2029 * triggers.2030 *2031 * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan2032 * cycles, in msecs.2033 *2034 * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more2035 * sets of attributes to match during scheduled scans. Only BSSs2036 * that match any of the sets will be reported. These are2037 * pass-thru filter rules.2038 * For a match to succeed, the BSS must match all attributes of a2039 * set. Since not every hardware supports matching all types of2040 * attributes, there is no guarantee that the reported BSSs are2041 * fully complying with the match sets and userspace needs to be2042 * able to ignore them by itself.2043 * Thus, the implementation is somewhat hardware-dependent, but2044 * this is only an optimization and the userspace application2045 * needs to handle all the non-filtered results anyway.2046 * If the match attributes don't make sense when combined with2047 * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID2048 * is included in the probe request, but the match attributes2049 * will never let it go through), -EINVAL may be returned.2050 * If omitted, no filtering is done.2051 *2052 * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported2053 * interface combinations. In each nested item, it contains attributes2054 * defined in &enum nl80211_if_combination_attrs.2055 * If the wiphy uses multiple radios (@NL80211_ATTR_WIPHY_RADIOS is set),2056 * this attribute contains the interface combinations of the first radio.2057 * See @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS for the global wiphy2058 * combinations for the sum of all radios.2059 * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like2060 * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that2061 * are managed in software: interfaces of these types aren't subject to2062 * any restrictions in their number or combinations.2063 *2064 * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information2065 * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.2066 *2067 * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,2068 * nested array attribute containing an entry for each band, with the entry2069 * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but2070 * without the length restriction (at most %NL80211_MAX_SUPP_RATES).2071 *2072 * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon2073 * and Probe Response (when response to wildcard Probe Request); see2074 * &enum nl80211_hidden_ssid, represented as a u322075 *2076 * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.2077 * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to2078 * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the2079 * driver (or firmware) replies to Probe Request frames.2080 * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association2081 * Response frames. This is used with %NL80211_CMD_NEW_BEACON and2082 * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into2083 * (Re)Association Response frames when the driver (or firmware) replies to2084 * (Re)Association Request frames.2085 *2086 * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration2087 * of the station, see &enum nl80211_sta_wme_attr.2088 * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working2089 * as AP.2090 *2091 * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of2092 * roaming to another AP in the same ESS if the signal lever is low.2093 *2094 * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching2095 * candidate information, see &enum nl80211_pmksa_candidate_attr.2096 *2097 * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not2098 * for management frames transmission. In order to avoid p2p probe/action2099 * frames are being transmitted at CCK rate in 2GHz band, the user space2100 * applications use this attribute.2101 * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and2102 * %NL80211_CMD_FRAME commands.2103 *2104 * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup2105 * request, link setup confirm, link teardown, etc.). Values are2106 * described in the TDLS (802.11z) specification.2107 * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a2108 * TDLS conversation between two devices.2109 * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see2110 * &enum nl80211_tdls_operation, represented as a u8.2111 * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate2112 * as a TDLS peer sta.2113 * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown2114 * procedures should be performed by sending TDLS packets via2115 * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be2116 * used for asking the driver to perform a TDLS operation.2117 *2118 * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices2119 * that have AP support to indicate that they have the AP SME integrated2120 * with support for the features listed in this attribute, see2121 * &enum nl80211_ap_sme_features.2122 *2123 * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells2124 * the driver to not wait for an acknowledgement. Note that due to this,2125 * it will also not give a status callback nor return a cookie. This is2126 * mostly useful for probe responses to save airtime.2127 *2128 * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from2129 * &enum nl80211_feature_flags and is advertised in wiphy information.2130 * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe2131 * requests while operating in AP-mode.2132 * This attribute holds a bitmap of the supported protocols for2133 * offloading (see &enum nl80211_probe_resp_offload_support_attr).2134 *2135 * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire2136 * probe-response frame. The DA field in the 802.11 header is zero-ed out,2137 * to be filled by the FW.2138 * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable2139 * this feature during association. This is a flag attribute.2140 * Currently only supported in mac80211 drivers.2141 * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable2142 * this feature during association. This is a flag attribute.2143 * Currently only supported in mac80211 drivers.2144 * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable2145 * this feature during association. This is a flag attribute.2146 * Currently only supported in mac80211 drivers.2147 * @NL80211_ATTR_DISABLE_EHT: Force EHT capable interfaces to disable2148 * this feature during association. This is a flag attribute.2149 * Currently only supported in mac80211 drivers.2150 * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the2151 * ATTR_HT_CAPABILITY to which attention should be paid.2152 * Currently, only mac80211 NICs support this feature.2153 * The values that may be configured are:2154 * MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_402155 * AMPDU density and AMPDU factor.2156 * All values are treated as suggestions and may be ignored2157 * by the driver as required. The actual values may be seen in2158 * the station debugfs ht_caps file.2159 * @NL80211_ATTR_VHT_CAPABILITY_MASK: Specify which bits of the2160 * ATTR_VHT_CAPABILITY to which attention should be paid.2161 * Currently, only mac80211 NICs support this feature.2162 * All values are treated as suggestions and may be ignored2163 * by the driver as required. The actual values may be seen in2164 * the station debugfs vht_caps file.2165 *2166 * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country2167 * abides to when initiating radiation on DFS channels. A country maps2168 * to one DFS region.2169 *2170 * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of2171 * up to 16 TIDs.2172 *2173 * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be2174 * used by the drivers which has MLME in firmware and does not have support2175 * to report per station tx/rx activity to free up the station entry from2176 * the list. This needs to be used when the driver advertises the2177 * capability to timeout the stations.2178 *2179 * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int);2180 * this attribute is (depending on the driver capabilities) added to2181 * received frames indicated with %NL80211_CMD_FRAME.2182 *2183 * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds2184 * or 0 to disable background scan.2185 *2186 * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from2187 * userspace. If unset it is assumed the hint comes directly from2188 * a user. If set code could specify exactly what type of source2189 * was used to provide the hint. For the different types of2190 * allowed user regulatory hints see nl80211_user_reg_hint_type.2191 *2192 * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected2193 * the connection request from a station. nl80211_connect_failed_reason2194 * enum has different reasons of connection failure.2195 *2196 * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames.2197 * This contains the authentication frame body (non-IE and IE data),2198 * excluding the Authentication algorithm number, i.e., starting at the2199 * Authentication transaction sequence number field. It is used with2200 * authentication algorithms that need special fields to be added into2201 * the frames (SAE and FILS). Currently, only the SAE cases use the2202 * initial two fields (Authentication transaction sequence number and2203 * Status code). However, those fields are included in the attribute data2204 * for all authentication algorithms to keep the attribute definition2205 * consistent.2206 *2207 * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from2208 * association request when used with NL80211_CMD_NEW_STATION)2209 *2210 * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32)2211 *2212 * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with2213 * the START_AP and SET_BSS commands2214 * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the2215 * START_AP and SET_BSS commands. This can have the values 0 or 1;2216 * if not given in START_AP 0 is assumed, if not given in SET_BSS2217 * no change is made.2218 *2219 * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode2220 * defined in &enum nl80211_mesh_power_mode.2221 *2222 * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy,2223 * carried in a u32 attribute2224 *2225 * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for2226 * MAC ACL.2227 *2228 * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum2229 * number of MAC addresses that a device can support for MAC2230 * ACL.2231 *2232 * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace,2233 * contains a value of enum nl80211_radar_event (u32).2234 *2235 * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver2236 * has and handles. The format is the same as the IE contents. See2237 * 802.11-2012 8.4.2.29 for more information.2238 * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver2239 * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields.2240 *2241 * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to2242 * the driver, e.g., to enable TDLS power save (PU-APSD).2243 *2244 * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are2245 * advertised to the driver, e.g., to enable TDLS off channel operations2246 * and PU-APSD.2247 *2248 * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see2249 * &enum nl80211_protocol_features, the attribute is a u32.2250 *2251 * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports2252 * receiving the data for a single wiphy split across multiple2253 * messages, given with wiphy dump message2254 *2255 * @NL80211_ATTR_MDID: Mobility Domain Identifier2256 *2257 * @NL80211_ATTR_IE_RIC: Resource Information Container Information2258 * Element2259 *2260 * @NL80211_ATTR_CRIT_PROT_ID: critical protocol identifier requiring increased2261 * reliability, see &enum nl80211_crit_proto_id (u16).2262 * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which2263 * the connection should have increased reliability (u16).2264 *2265 * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16).2266 * This is similar to @NL80211_ATTR_STA_AID but with a difference of being2267 * allowed to be used with the first @NL80211_CMD_SET_STATION command to2268 * update a TDLS peer STA entry.2269 *2270 * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information.2271 *2272 * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's2273 * until the channel switch event.2274 * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission2275 * must be blocked on the current channel (before the channel switch2276 * operation). Also included in the channel switch started event if quiet2277 * was requested by the AP.2278 * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information2279 * for the time while performing a channel switch.2280 * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel2281 * switch or color change counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).2282 * @NL80211_ATTR_CNTDWN_OFFS_PRESP: An array of offsets (u16) to the channel2283 * switch or color change counters in the probe response (%NL80211_ATTR_PROBE_RESP).2284 *2285 * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.2286 * As specified in the &enum nl80211_rxmgmt_flags.2287 *2288 * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels.2289 *2290 * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported2291 * operating classes.2292 *2293 * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space2294 * controls DFS operation in IBSS mode. If the flag is included in2295 * %NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS2296 * channels and reports radar events to userspace. Userspace is required2297 * to react to radar events, e.g. initiate a channel switch or leave the2298 * IBSS network.2299 *2300 * @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports2301 * 5 MHz channel bandwidth.2302 * @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports2303 * 10 MHz channel bandwidth.2304 *2305 * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode2306 * Notification Element based on association request when used with2307 * %NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when2308 * %NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS);2309 * u8 attribute.2310 *2311 * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if2312 * %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)2313 * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command2314 * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this2315 * attribute is also used for vendor command feature advertisement2316 * @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy2317 * info, containing a nested array of possible events2318 *2319 * @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This2320 * data is in the format defined for the payload of the QoS Map Set element2321 * in IEEE Std 802.11-2012, 8.4.2.97.2322 *2323 * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS2324 * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS2325 *2326 * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many2327 * associated stations are supported in AP mode (including P2P GO); u32.2328 * Since drivers may not have a fixed limit on the maximum number (e.g.,2329 * other concurrent operations may affect this), drivers are allowed to2330 * advertise values that cannot always be met. In such cases, an attempt2331 * to add a new station entry with @NL80211_CMD_NEW_STATION may fail.2332 *2333 * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which2334 * should be updated when the frame is transmitted.2335 * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum2336 * supported number of csa counters.2337 *2338 * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.2339 * As specified in the &enum nl80211_tdls_peer_capability.2340 *2341 * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface2342 * creation then the new interface will be owned by the netlink socket2343 * that created it and will be destroyed when the socket is closed.2344 * If set during scheduled scan start then the new scan req will be2345 * owned by the netlink socket that created it and the scheduled scan will2346 * be stopped when the socket is closed.2347 * If set during configuration of regulatory indoor operation then the2348 * regulatory indoor configuration would be owned by the netlink socket2349 * that configured the indoor setting, and the indoor operation would be2350 * cleared when the socket is closed.2351 * If set during NAN interface creation, the interface will be destroyed2352 * if the socket is closed just like any other interface. Moreover, NAN2353 * notifications will be sent in unicast to that socket. Without this2354 * attribute, the notifications will be sent to the %NL80211_MCGRP_NAN2355 * multicast group.2356 * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the2357 * station will deauthenticate when the socket is closed.2358 * If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically2359 * torn down when the socket is closed.2360 * If set during %NL80211_CMD_JOIN_MESH the mesh setup will be2361 * automatically torn down when the socket is closed.2362 * If set during %NL80211_CMD_START_AP the AP will be automatically2363 * disabled when the socket is closed.2364 *2365 * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is2366 * the TDLS link initiator.2367 *2368 * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection2369 * shall support Radio Resource Measurements (11k). This attribute can be2370 * used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests.2371 * User space applications are expected to use this flag only if the2372 * underlying device supports these minimal RRM features:2373 * %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES,2374 * %NL80211_FEATURE_QUIET,2375 * Or, if global RRM is supported, see:2376 * %NL80211_EXT_FEATURE_RRM2377 * If this flag is used, driver must add the Power Capabilities IE to the2378 * association request. In addition, it must also set the RRM capability2379 * flag in the association request's Capability Info field.2380 *2381 * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout2382 * estimation algorithm (dynack). In order to activate dynack2383 * %NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower2384 * drivers to indicate dynack capability. Dynack is automatically disabled2385 * setting valid value for coverage class.2386 *2387 * @NL80211_ATTR_TSID: a TSID value (u8 attribute)2388 * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute)2389 * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds2390 * (per second) (u16 attribute)2391 *2392 * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see2393 * &enum nl80211_smps_mode.2394 *2395 * @NL80211_ATTR_OPER_CLASS: operating class2396 *2397 * @NL80211_ATTR_MAC_MASK: MAC address mask2398 *2399 * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device2400 * is self-managing its regulatory information and any regulatory domain2401 * obtained from it is coming from the device's wiphy and not the global2402 * cfg80211 regdomain.2403 *2404 * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte2405 * array. The feature flags are identified by their bit index (see &enum2406 * nl80211_ext_feature_index). The bit index is ordered starting at the2407 * least-significant bit of the first byte in the array, ie. bit index 02408 * is located at bit 0 of byte 0. bit index 25 would be located at bit 12409 * of byte 3 (u8 array).2410 *2411 * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be2412 * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY2413 * may return a survey entry without a channel indicating global radio2414 * statistics (only some values are valid and make sense.)2415 * For devices that don't return such an entry even then, the information2416 * should be contained in the result as the sum of the respective counters2417 * over all channels.2418 *2419 * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a2420 * scheduled scan is started. Or the delay before a WoWLAN2421 * net-detect scan is started, counting from the moment the2422 * system is suspended. This value is a u32, in seconds.2423 *2424 * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device2425 * is operating in an indoor environment.2426 *2427 * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for2428 * scheduled scan supported by the device (u32), a wiphy attribute.2429 * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for2430 * a scan plan (u32), a wiphy attribute.2431 * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in2432 * a scan plan (u32), a wiphy attribute.2433 * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan.2434 * Each scan plan defines the number of scan iterations and the interval2435 * between scans. The last scan plan will always run infinitely,2436 * thus it must not specify the number of iterations, only the interval2437 * between scans. The scan plans are executed sequentially.2438 * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.2439 * @NL80211_ATTR_PBSS: flag attribute. If set it means operate2440 * in a PBSS. Specified in %NL80211_CMD_CONNECT to request2441 * connecting to a PCP, and in %NL80211_CMD_START_AP to start2442 * a PCP instead of AP. Relevant for DMG networks only.2443 * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the2444 * BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains2445 * attributes according &enum nl80211_bss_select_attr to indicate what2446 * BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT2447 * it contains the behaviour-specific attribute containing the parameters for2448 * BSS selection to be done by driver and/or firmware.2449 *2450 * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported2451 * or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status2452 *2453 * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment2454 *2455 * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes:2456 * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA,2457 * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities and2458 * other interface-type specific capabilities per interface type. For MLO,2459 * %NL80211_ATTR_EML_CAPABILITY and %NL80211_ATTR_MLD_CAPA_AND_OPS are2460 * present.2461 *2462 * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO2463 * groupID for monitor mode.2464 * The first 8 bytes are a mask that defines the membership in each2465 * group (there are 64 groups, group 0 and 63 are reserved),2466 * each bit represents a group and set to 1 for being a member in2467 * that group and 0 for not being a member.2468 * The remaining 16 bytes define the position in each group: 2 bits for2469 * each group.2470 * (smaller group numbers represented on most significant bits and bigger2471 * group numbers on least significant bits.)2472 * This attribute is used only if all interfaces are in monitor mode.2473 * Set this attribute in order to monitor packets using the given MU-MIMO2474 * groupID data.2475 * to turn off that feature set all the bits of the groupID to zero.2476 * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow2477 * when using MU-MIMO air sniffer.2478 * to turn that feature off set an invalid mac address2479 * (e.g. FF:FF:FF:FF:FF:FF)2480 *2481 * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually2482 * started (u64). The time is the TSF of the BSS the interface that2483 * requested the scan is connected to (if available, otherwise this2484 * attribute must not be included).2485 * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which2486 * %NL80211_ATTR_SCAN_START_TIME_TSF is set.2487 * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If2488 * %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the2489 * maximum measurement duration allowed. This attribute is used with2490 * measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN2491 * if the scan is used for beacon report radio measurement.2492 * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates2493 * that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is2494 * mandatory. If this flag is not set, the duration is the maximum duration2495 * and the actual measurement duration may be shorter.2496 *2497 * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is2498 * used to pull the stored data for mesh peer in power save state.2499 *2500 * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by2501 * %NL80211_CMD_START_NAN and optionally with2502 * %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0.2503 * Also, values 1 and 255 are reserved for certification purposes and2504 * should not be used during a normal device operation.2505 * @NL80211_ATTR_BANDS: operating bands configuration. This is a u322506 * bitmask of BIT(NL80211_BAND_*) as described in %enum2507 * nl80211_band. For instance, for NL80211_BAND_2GHZ, bit 02508 * would be set. This attribute is used with2509 * %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and2510 * it is optional. If no bands are set, it means don't-care and2511 * the device will decide what to use.2512 * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See2513 * &enum nl80211_nan_func_attributes for description of this nested2514 * attribute.2515 * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.2516 * See &enum nl80211_nan_match_attributes.2517 * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame2518 * protection.2519 * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association2520 * Request/Response frame protection. This attribute contains the 16 octet2521 * STA Nonce followed by 16 octets of AP Nonce.2522 *2523 * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast2524 * packets should be send out as unicast to all stations (flag attribute).2525 *2526 * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also2527 * used in various commands/events for specifying the BSSID.2528 *2529 * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which2530 * other BSSs has to be better or slightly worse than the current2531 * connected BSS so that they get reported to user space.2532 * This will give an opportunity to userspace to consider connecting to2533 * other matching BSSs which have better or slightly worse RSSI than2534 * the current connected BSS by using an offloaded operation to avoid2535 * unnecessary wakeups.2536 *2537 * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in2538 * the specified band is to be adjusted before doing2539 * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparison to figure out2540 * better BSSs. The attribute value is a packed structure2541 * value as specified by &struct nl80211_bss_select_rssi_adjust.2542 *2543 * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out.2544 * u32 attribute with an &enum nl80211_timeout_reason value. This is used,2545 * e.g., with %NL80211_CMD_CONNECT event.2546 *2547 * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP)2548 * username part of NAI used to refer keys rRK and rIK. This is used with2549 * %NL80211_CMD_CONNECT.2550 *2551 * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part2552 * of NAI specifying the domain name of the ER server. This is used with2553 * %NL80211_CMD_CONNECT.2554 *2555 * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number2556 * to use in ERP messages. This is used in generating the FILS wrapped data2557 * for FILS authentication and is used with %NL80211_CMD_CONNECT.2558 *2559 * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the2560 * NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and2561 * %NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK2562 * from successful FILS authentication and is used with2563 * %NL80211_CMD_CONNECT.2564 *2565 * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertised by a FILS AP2566 * identifying the scope of PMKSAs. This is used with2567 * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.2568 *2569 * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with2570 * %NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID.2571 * For %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP it is used to provide2572 * PSK for offloading 4-way handshake for WPA/WPA2-PSK networks. For 802.1X2573 * authentication it is used with %NL80211_CMD_SET_PMK. For offloaded FT2574 * support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME2575 * is included as well.2576 *2577 * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to2578 * indicate that it supports multiple active scheduled scan requests.2579 * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled2580 * scan request that may be active for the device (u32).2581 *2582 * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include2583 * in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it2584 * wants to use the supported offload of the 4-way handshake.2585 * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.2586 * @NL80211_ATTR_PORT_AUTHORIZED: (reserved)2587 *2588 * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external2589 * authentication operation (u32 attribute with an2590 * &enum nl80211_external_auth_action value). This is used with the2591 * %NL80211_CMD_EXTERNAL_AUTH request event.2592 * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user2593 * space supports external authentication. This attribute shall be used2594 * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver2595 * may offload authentication processing to user space if this capability2596 * is indicated in the respective requests from the user space. (This flag2597 * attribute deprecated for %NL80211_CMD_START_AP, use2598 * %NL80211_ATTR_AP_SETTINGS_FLAGS)2599 *2600 * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this2601 * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.2602 *2603 * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum2604 * nl80211_txq_stats)2605 * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy.2606 * The smaller of this and the memory limit is enforced.2607 * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory limit (in bytes) for the2608 * TXQ queues for this phy. The smaller of this and the packet limit is2609 * enforced.2610 * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes2611 * a flow is assigned on each round of the DRR scheduler.2612 * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from2613 * association request when used with NL80211_CMD_NEW_STATION). Can be set2614 * only if %NL80211_STA_FLAG_WME is set.2615 *2616 * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include2617 * in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing2618 * measurement (FTM) responder functionality and containing parameters as2619 * possible, see &enum nl80211_ftm_responder_attr2620 *2621 * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder2622 * statistics, see &enum nl80211_ftm_responder_stats.2623 *2624 * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32),2625 * if the attribute is not given no timeout is requested. Note that 0 is an2626 * invalid value.2627 *2628 * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result)2629 * data, uses nested attributes specified in2630 * &enum nl80211_peer_measurement_attrs.2631 * This is also used for capability advertisement in the wiphy information,2632 * with the appropriate sub-attributes.2633 *2634 * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime2635 * scheduler.2636 *2637 * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for2638 * station associated with the AP. See &enum nl80211_tx_power_setting for2639 * possible values.2640 * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This2641 * allows to set Tx power for a station. If this attribute is not included,2642 * the default per-interface tx power setting will be overriding. Driver2643 * should be picking up the lowest tx power, either tx power per-interface2644 * or per-station.2645 *2646 * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It2647 * is used with %NL80211_CMD_CONNECT to provide password for offloading2648 * SAE authentication for WPA3-Personal networks.2649 *2650 * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.2651 *2652 * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection2653 * functionality.2654 *2655 * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz2656 * channel(s) that are allowed to be used for EDMG transmissions.2657 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute)2658 * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes2659 * the allowed channel bandwidth configurations. (u8 attribute)2660 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.2661 *2662 * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key2663 * (u16).2664 *2665 * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings.2666 *2667 * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry2668 * using attributes from &enum nl80211_iftype_akm_attributes. This2669 * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating2670 * supported AKM suites capability per interface. AKMs advertised in2671 * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not2672 * advertised for a specific interface type.2673 *2674 * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a2675 * nested attribute with &enum nl80211_tid_config_attr sub-attributes;2676 * on output (in wiphy attributes) it contains only the feature sub-2677 * attributes.2678 *2679 * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control2680 * port in order to forward/receive them as ordinary data frames.2681 *2682 * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32,2683 * dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value).2684 * An optional parameter configured through %NL80211_CMD_SET_PMKSA.2685 * Drivers that trigger roaming need to know the lifetime of the2686 * configured PMKSA for triggering the full vs. PMKSA caching based2687 * authentication. This timeout helps authentication methods like SAE,2688 * where PMK gets updated only by going through a full (new SAE)2689 * authentication instead of getting updated during an association for EAP2690 * authentication. No new full authentication within the PMK expiry shall2691 * result in a disassociation at the end of the lifetime.2692 *2693 * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in2694 * terms of percentage of %NL80211_ATTR_PMK_LIFETIME2695 * (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional2696 * parameter configured through %NL80211_CMD_SET_PMKSA. Requests the2697 * driver to trigger a full authentication roam (without PMKSA caching)2698 * after the reauthentication threshold time, but before the PMK lifetime2699 * has expired.2700 *2701 * Authentication methods like SAE need to be able to generate a new PMKSA2702 * entry without having to force a disconnection after the PMK timeout. If2703 * no roaming occurs between the reauth threshold and PMK expiration,2704 * disassociation is still forced.2705 * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the2706 * %NL80211_CMD_REGISTER_FRAME command, see the description there.2707 * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated2708 * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with2709 * an %NL80211_ATTR_WIPHY_FREQ_OFFSET.2710 * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the2711 * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1.2712 * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies2713 *2714 * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from2715 * association request when used with NL80211_CMD_NEW_STATION).2716 *2717 * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS2718 * discovery. It is a nested attribute, see2719 * &enum nl80211_fils_discovery_attributes. Userspace should pass an empty2720 * nested attribute to disable this feature and delete the templates.2721 *2722 * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure2723 * unsolicited broadcast probe response. It is a nested attribute, see2724 * &enum nl80211_unsol_bcast_probe_resp_attributes. Userspace should pass an empty2725 * nested attribute to disable this feature and delete the templates.2726 *2727 * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from2728 * association request when used with NL80211_CMD_NEW_STATION)2729 * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element2730 * override mask. Used with NL80211_ATTR_S1G_CAPABILITY in2731 * NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.2732 *2733 * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE2734 * derivation in WPA3-Personal networks which are using SAE authentication.2735 * This is a u8 attribute that encapsulates one of the values from2736 * &enum nl80211_sae_pwe_mechanism.2737 *2738 * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when2739 * used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields2740 * of %nl80211_sar_attrs which specifies the sar type and related2741 * sar specs. Sar specs contains array of %nl80211_sar_specs_attrs.2742 *2743 * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and2744 * disassoc events to indicate that an immediate reconnect to the AP2745 * is desired.2746 *2747 * @NL80211_ATTR_OBSS_COLOR_BITMAP: bitmap of the u64 BSS colors for the2748 * %NL80211_CMD_OBSS_COLOR_COLLISION event.2749 *2750 * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's2751 * until the color switch event.2752 * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are2753 * switching to2754 * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE2755 * information for the time while performing a color switch.2756 *2757 * @NL80211_ATTR_MBSSID_CONFIG: Nested attribute for multiple BSSID2758 * advertisements (MBSSID) parameters in AP mode.2759 * Kernel uses this attribute to indicate the driver's support for MBSSID2760 * and enhanced multi-BSSID advertisements (EMA AP) to the userspace.2761 * Userspace should use this attribute to configure per interface MBSSID2762 * parameters.2763 * See &enum nl80211_mbssid_config_attributes for details.2764 *2765 * @NL80211_ATTR_MBSSID_ELEMS: Nested parameter to pass multiple BSSID elements.2766 * Mandatory parameter for the transmitting interface to enable MBSSID.2767 * Optional for the non-transmitting interfaces.2768 *2769 * @NL80211_ATTR_RADAR_BACKGROUND: Configure dedicated offchannel chain2770 * available for radar/CAC detection on some hw. This chain can't be used2771 * to transmit or receive frames and it is bounded to a running wdev.2772 * Background radar/CAC detection allows to avoid the CAC downtime2773 * switching on a different channel during CAC detection on the selected2774 * radar channel.2775 *2776 * @NL80211_ATTR_AP_SETTINGS_FLAGS: u32 attribute contains ap settings flags,2777 * enumerated in &enum nl80211_ap_settings_flags. This attribute shall be2778 * used with %NL80211_CMD_START_AP request.2779 *2780 * @NL80211_ATTR_EHT_CAPABILITY: EHT Capability information element (from2781 * association request when used with NL80211_CMD_NEW_STATION). Can be set2782 * only if %NL80211_STA_FLAG_WME is set.2783 *2784 * @NL80211_ATTR_MLO_LINK_ID: A (u8) link ID for use with MLO, to be used with2785 * various commands that need a link ID to operate.2786 * @NL80211_ATTR_MLO_LINKS: A nested array of links, each containing some2787 * per-link information and a link ID.2788 * @NL80211_ATTR_MLD_ADDR: An MLD address, used with various commands such as2789 * authenticate/associate.2790 *2791 * @NL80211_ATTR_MLO_SUPPORT: Flag attribute to indicate user space supports MLO2792 * connection. Used with %NL80211_CMD_CONNECT. If this attribute is not2793 * included in NL80211_CMD_CONNECT drivers must not perform MLO connection.2794 *2795 * @NL80211_ATTR_MAX_NUM_AKM_SUITES: U16 attribute. Indicates maximum number of2796 * AKM suites allowed for %NL80211_CMD_CONNECT, %NL80211_CMD_ASSOCIATE and2797 * %NL80211_CMD_START_AP in %NL80211_CMD_GET_WIPHY response. If this2798 * attribute is not present userspace shall consider maximum number of AKM2799 * suites allowed as %NL80211_MAX_NR_AKM_SUITES which is the legacy maximum2800 * number prior to the introduction of this attribute.2801 *2802 * @NL80211_ATTR_EML_CAPABILITY: EML Capability information (u16)2803 * @NL80211_ATTR_MLD_CAPA_AND_OPS: MLD Capabilities and Operations (u16)2804 *2805 * @NL80211_ATTR_TX_HW_TIMESTAMP: Hardware timestamp for TX operation in2806 * nanoseconds (u64). This is the device clock timestamp so it will2807 * probably reset when the device is stopped or the firmware is reset.2808 * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the frame TX2809 * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates2810 * the ack TX timestamp.2811 * @NL80211_ATTR_RX_HW_TIMESTAMP: Hardware timestamp for RX operation in2812 * nanoseconds (u64). This is the device clock timestamp so it will2813 * probably reset when the device is stopped or the firmware is reset.2814 * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the ack RX2815 * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates2816 * the incoming frame RX timestamp.2817 * @NL80211_ATTR_TD_BITMAP: Transition Disable bitmap, for subsequent2818 * (re)associations.2819 *2820 * @NL80211_ATTR_PUNCT_BITMAP: (u32) Preamble puncturing bitmap, lowest2821 * bit corresponds to the lowest 20 MHz channel. Each bit set to 12822 * indicates that the sub-channel is punctured. Higher 16 bits are2823 * reserved.2824 *2825 * @NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS: Maximum number of peers that HW2826 * timestamping can be enabled for concurrently (u16), a wiphy attribute.2827 * A value of 0xffff indicates setting for all peers (i.e. not specifying2828 * an address with %NL80211_CMD_SET_HW_TIMESTAMP) is supported.2829 * @NL80211_ATTR_HW_TIMESTAMP_ENABLED: Indicates whether HW timestamping should2830 * be enabled or not (flag attribute).2831 *2832 * @NL80211_ATTR_EMA_RNR_ELEMS: Optional nested attribute for2833 * reduced neighbor report (RNR) elements. This attribute can be used2834 * only when NL80211_MBSSID_CONFIG_ATTR_EMA is enabled.2835 * Userspace is responsible for splitting the RNR into multiple2836 * elements such that each element excludes the non-transmitting2837 * profiles already included in the MBSSID element2838 * (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon2839 * will be generated by adding MBSSID and RNR elements at the same2840 * index. If the userspace includes more RNR elements than number of2841 * MBSSID elements then these will be added in every EMA beacon.2842 *2843 * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is2844 * disabled.2845 *2846 * @NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA: Include BSS usage data, i.e.2847 * include BSSes that can only be used in restricted scenarios and/or2848 * cannot be used at all.2849 *2850 * @NL80211_ATTR_MLO_TTLM_DLINK: Binary attribute specifying the downlink TID to2851 * link mapping. The length is 8 * sizeof(u16). For each TID the link2852 * mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)2853 * in Draft P802.11be_D4.0.2854 * @NL80211_ATTR_MLO_TTLM_ULINK: Binary attribute specifying the uplink TID to2855 * link mapping. The length is 8 * sizeof(u16). For each TID the link2856 * mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)2857 * in Draft P802.11be_D4.0.2858 *2859 * @NL80211_ATTR_ASSOC_SPP_AMSDU: flag attribute used with2860 * %NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs2861 * are used on this connection2862 *2863 * @NL80211_ATTR_WIPHY_RADIOS: Nested attribute describing physical radios2864 * belonging to this wiphy. See &enum nl80211_wiphy_radio_attrs.2865 *2866 * @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS: Nested attribute listing the2867 * supported interface combinations for all radios combined. In each2868 * nested item, it contains attributes defined in2869 * &enum nl80211_if_combination_attrs.2870 *2871 * @NUM_NL80211_ATTR: total number of nl80211_attrs available2872 * @NL80211_ATTR_MAX: highest attribute number currently defined2873 * @__NL80211_ATTR_AFTER_LAST: internal use2874 */2875enum nl80211_attrs {2876/* don't change the order or add anything between, this is ABI! */2877 NL80211_ATTR_UNSPEC,2878 2879 NL80211_ATTR_WIPHY,2880 NL80211_ATTR_WIPHY_NAME,2881 2882 NL80211_ATTR_IFINDEX,2883 NL80211_ATTR_IFNAME,2884 NL80211_ATTR_IFTYPE,2885 2886 NL80211_ATTR_MAC,2887 2888 NL80211_ATTR_KEY_DATA,2889 NL80211_ATTR_KEY_IDX,2890 NL80211_ATTR_KEY_CIPHER,2891 NL80211_ATTR_KEY_SEQ,2892 NL80211_ATTR_KEY_DEFAULT,2893 2894 NL80211_ATTR_BEACON_INTERVAL,2895 NL80211_ATTR_DTIM_PERIOD,2896 NL80211_ATTR_BEACON_HEAD,2897 NL80211_ATTR_BEACON_TAIL,2898 2899 NL80211_ATTR_STA_AID,2900 NL80211_ATTR_STA_FLAGS,2901 NL80211_ATTR_STA_LISTEN_INTERVAL,2902 NL80211_ATTR_STA_SUPPORTED_RATES,2903 NL80211_ATTR_STA_VLAN,2904 NL80211_ATTR_STA_INFO,2905 2906 NL80211_ATTR_WIPHY_BANDS,2907 2908 NL80211_ATTR_MNTR_FLAGS,2909 2910 NL80211_ATTR_MESH_ID,2911 NL80211_ATTR_STA_PLINK_ACTION,2912 NL80211_ATTR_MPATH_NEXT_HOP,2913 NL80211_ATTR_MPATH_INFO,2914 2915 NL80211_ATTR_BSS_CTS_PROT,2916 NL80211_ATTR_BSS_SHORT_PREAMBLE,2917 NL80211_ATTR_BSS_SHORT_SLOT_TIME,2918 2919 NL80211_ATTR_HT_CAPABILITY,2920 2921 NL80211_ATTR_SUPPORTED_IFTYPES,2922 2923 NL80211_ATTR_REG_ALPHA2,2924 NL80211_ATTR_REG_RULES,2925 2926 NL80211_ATTR_MESH_CONFIG,2927 2928 NL80211_ATTR_BSS_BASIC_RATES,2929 2930 NL80211_ATTR_WIPHY_TXQ_PARAMS,2931 NL80211_ATTR_WIPHY_FREQ,2932 NL80211_ATTR_WIPHY_CHANNEL_TYPE,2933 2934 NL80211_ATTR_KEY_DEFAULT_MGMT,2935 2936 NL80211_ATTR_MGMT_SUBTYPE,2937 NL80211_ATTR_IE,2938 2939 NL80211_ATTR_MAX_NUM_SCAN_SSIDS,2940 2941 NL80211_ATTR_SCAN_FREQUENCIES,2942 NL80211_ATTR_SCAN_SSIDS,2943 NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */2944 NL80211_ATTR_BSS,2945 2946 NL80211_ATTR_REG_INITIATOR,2947 NL80211_ATTR_REG_TYPE,2948 2949 NL80211_ATTR_SUPPORTED_COMMANDS,2950 2951 NL80211_ATTR_FRAME,2952 NL80211_ATTR_SSID,2953 NL80211_ATTR_AUTH_TYPE,2954 NL80211_ATTR_REASON_CODE,2955 2956 NL80211_ATTR_KEY_TYPE,2957 2958 NL80211_ATTR_MAX_SCAN_IE_LEN,2959 NL80211_ATTR_CIPHER_SUITES,2960 2961 NL80211_ATTR_FREQ_BEFORE,2962 NL80211_ATTR_FREQ_AFTER,2963 2964 NL80211_ATTR_FREQ_FIXED,2965 2966 2967 NL80211_ATTR_WIPHY_RETRY_SHORT,2968 NL80211_ATTR_WIPHY_RETRY_LONG,2969 NL80211_ATTR_WIPHY_FRAG_THRESHOLD,2970 NL80211_ATTR_WIPHY_RTS_THRESHOLD,2971 2972 NL80211_ATTR_TIMED_OUT,2973 2974 NL80211_ATTR_USE_MFP,2975 2976 NL80211_ATTR_STA_FLAGS2,2977 2978 NL80211_ATTR_CONTROL_PORT,2979 2980 NL80211_ATTR_TESTDATA,2981 2982 NL80211_ATTR_PRIVACY,2983 2984 NL80211_ATTR_DISCONNECTED_BY_AP,2985 NL80211_ATTR_STATUS_CODE,2986 2987 NL80211_ATTR_CIPHER_SUITES_PAIRWISE,2988 NL80211_ATTR_CIPHER_SUITE_GROUP,2989 NL80211_ATTR_WPA_VERSIONS,2990 NL80211_ATTR_AKM_SUITES,2991 2992 NL80211_ATTR_REQ_IE,2993 NL80211_ATTR_RESP_IE,2994 2995 NL80211_ATTR_PREV_BSSID,2996 2997 NL80211_ATTR_KEY,2998 NL80211_ATTR_KEYS,2999 3000 NL80211_ATTR_PID,3001 3002 NL80211_ATTR_4ADDR,3003 3004 NL80211_ATTR_SURVEY_INFO,3005 3006 NL80211_ATTR_PMKID,3007 NL80211_ATTR_MAX_NUM_PMKIDS,3008 3009 NL80211_ATTR_DURATION,3010 3011 NL80211_ATTR_COOKIE,3012 3013 NL80211_ATTR_WIPHY_COVERAGE_CLASS,3014 3015 NL80211_ATTR_TX_RATES,3016 3017 NL80211_ATTR_FRAME_MATCH,3018 3019 NL80211_ATTR_ACK,3020 3021 NL80211_ATTR_PS_STATE,3022 3023 NL80211_ATTR_CQM,3024 3025 NL80211_ATTR_LOCAL_STATE_CHANGE,3026 3027 NL80211_ATTR_AP_ISOLATE,3028 3029 NL80211_ATTR_WIPHY_TX_POWER_SETTING,3030 NL80211_ATTR_WIPHY_TX_POWER_LEVEL,3031 3032 NL80211_ATTR_TX_FRAME_TYPES,3033 NL80211_ATTR_RX_FRAME_TYPES,3034 NL80211_ATTR_FRAME_TYPE,3035 3036 NL80211_ATTR_CONTROL_PORT_ETHERTYPE,3037 NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,3038 3039 NL80211_ATTR_SUPPORT_IBSS_RSN,3040 3041 NL80211_ATTR_WIPHY_ANTENNA_TX,3042 NL80211_ATTR_WIPHY_ANTENNA_RX,3043 3044 NL80211_ATTR_MCAST_RATE,3045 3046 NL80211_ATTR_OFFCHANNEL_TX_OK,3047 3048 NL80211_ATTR_BSS_HT_OPMODE,3049 3050 NL80211_ATTR_KEY_DEFAULT_TYPES,3051 3052 NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,3053 3054 NL80211_ATTR_MESH_SETUP,3055 3056 NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,3057 NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,3058 3059 NL80211_ATTR_SUPPORT_MESH_AUTH,3060 NL80211_ATTR_STA_PLINK_STATE,3061 3062 NL80211_ATTR_WOWLAN_TRIGGERS,3063 NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,3064 3065 NL80211_ATTR_SCHED_SCAN_INTERVAL,3066 3067 NL80211_ATTR_INTERFACE_COMBINATIONS,3068 NL80211_ATTR_SOFTWARE_IFTYPES,3069 3070 NL80211_ATTR_REKEY_DATA,3071 3072 NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,3073 NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,3074 3075 NL80211_ATTR_SCAN_SUPP_RATES,3076 3077 NL80211_ATTR_HIDDEN_SSID,3078 3079 NL80211_ATTR_IE_PROBE_RESP,3080 NL80211_ATTR_IE_ASSOC_RESP,3081 3082 NL80211_ATTR_STA_WME,3083 NL80211_ATTR_SUPPORT_AP_UAPSD,3084 3085 NL80211_ATTR_ROAM_SUPPORT,3086 3087 NL80211_ATTR_SCHED_SCAN_MATCH,3088 NL80211_ATTR_MAX_MATCH_SETS,3089 3090 NL80211_ATTR_PMKSA_CANDIDATE,3091 3092 NL80211_ATTR_TX_NO_CCK_RATE,3093 3094 NL80211_ATTR_TDLS_ACTION,3095 NL80211_ATTR_TDLS_DIALOG_TOKEN,3096 NL80211_ATTR_TDLS_OPERATION,3097 NL80211_ATTR_TDLS_SUPPORT,3098 NL80211_ATTR_TDLS_EXTERNAL_SETUP,3099 3100 NL80211_ATTR_DEVICE_AP_SME,3101 3102 NL80211_ATTR_DONT_WAIT_FOR_ACK,3103 3104 NL80211_ATTR_FEATURE_FLAGS,3105 3106 NL80211_ATTR_PROBE_RESP_OFFLOAD,3107 3108 NL80211_ATTR_PROBE_RESP,3109 3110 NL80211_ATTR_DFS_REGION,3111 3112 NL80211_ATTR_DISABLE_HT,3113 NL80211_ATTR_HT_CAPABILITY_MASK,3114 3115 NL80211_ATTR_NOACK_MAP,3116 3117 NL80211_ATTR_INACTIVITY_TIMEOUT,3118 3119 NL80211_ATTR_RX_SIGNAL_DBM,3120 3121 NL80211_ATTR_BG_SCAN_PERIOD,3122 3123 NL80211_ATTR_WDEV,3124 3125 NL80211_ATTR_USER_REG_HINT_TYPE,3126 3127 NL80211_ATTR_CONN_FAILED_REASON,3128 3129 NL80211_ATTR_AUTH_DATA,3130 3131 NL80211_ATTR_VHT_CAPABILITY,3132 3133 NL80211_ATTR_SCAN_FLAGS,3134 3135 NL80211_ATTR_CHANNEL_WIDTH,3136 NL80211_ATTR_CENTER_FREQ1,3137 NL80211_ATTR_CENTER_FREQ2,3138 3139 NL80211_ATTR_P2P_CTWINDOW,3140 NL80211_ATTR_P2P_OPPPS,3141 3142 NL80211_ATTR_LOCAL_MESH_POWER_MODE,3143 3144 NL80211_ATTR_ACL_POLICY,3145 3146 NL80211_ATTR_MAC_ADDRS,3147 3148 NL80211_ATTR_MAC_ACL_MAX,3149 3150 NL80211_ATTR_RADAR_EVENT,3151 3152 NL80211_ATTR_EXT_CAPA,3153 NL80211_ATTR_EXT_CAPA_MASK,3154 3155 NL80211_ATTR_STA_CAPABILITY,3156 NL80211_ATTR_STA_EXT_CAPABILITY,3157 3158 NL80211_ATTR_PROTOCOL_FEATURES,3159 NL80211_ATTR_SPLIT_WIPHY_DUMP,3160 3161 NL80211_ATTR_DISABLE_VHT,3162 NL80211_ATTR_VHT_CAPABILITY_MASK,3163 3164 NL80211_ATTR_MDID,3165 NL80211_ATTR_IE_RIC,3166 3167 NL80211_ATTR_CRIT_PROT_ID,3168 NL80211_ATTR_MAX_CRIT_PROT_DURATION,3169 3170 NL80211_ATTR_PEER_AID,3171 3172 NL80211_ATTR_COALESCE_RULE,3173 3174 NL80211_ATTR_CH_SWITCH_COUNT,3175 NL80211_ATTR_CH_SWITCH_BLOCK_TX,3176 NL80211_ATTR_CSA_IES,3177 NL80211_ATTR_CNTDWN_OFFS_BEACON,3178 NL80211_ATTR_CNTDWN_OFFS_PRESP,3179 3180 NL80211_ATTR_RXMGMT_FLAGS,3181 3182 NL80211_ATTR_STA_SUPPORTED_CHANNELS,3183 3184 NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES,3185 3186 NL80211_ATTR_HANDLE_DFS,3187 3188 NL80211_ATTR_SUPPORT_5_MHZ,3189 NL80211_ATTR_SUPPORT_10_MHZ,3190 3191 NL80211_ATTR_OPMODE_NOTIF,3192 3193 NL80211_ATTR_VENDOR_ID,3194 NL80211_ATTR_VENDOR_SUBCMD,3195 NL80211_ATTR_VENDOR_DATA,3196 NL80211_ATTR_VENDOR_EVENTS,3197 3198 NL80211_ATTR_QOS_MAP,3199 3200 NL80211_ATTR_MAC_HINT,3201 NL80211_ATTR_WIPHY_FREQ_HINT,3202 3203 NL80211_ATTR_MAX_AP_ASSOC_STA,3204 3205 NL80211_ATTR_TDLS_PEER_CAPABILITY,3206 3207 NL80211_ATTR_SOCKET_OWNER,3208 3209 NL80211_ATTR_CSA_C_OFFSETS_TX,3210 NL80211_ATTR_MAX_CSA_COUNTERS,3211 3212 NL80211_ATTR_TDLS_INITIATOR,3213 3214 NL80211_ATTR_USE_RRM,3215 3216 NL80211_ATTR_WIPHY_DYN_ACK,3217 3218 NL80211_ATTR_TSID,3219 NL80211_ATTR_USER_PRIO,3220 NL80211_ATTR_ADMITTED_TIME,3221 3222 NL80211_ATTR_SMPS_MODE,3223 3224 NL80211_ATTR_OPER_CLASS,3225 3226 NL80211_ATTR_MAC_MASK,3227 3228 NL80211_ATTR_WIPHY_SELF_MANAGED_REG,3229 3230 NL80211_ATTR_EXT_FEATURES,3231 3232 NL80211_ATTR_SURVEY_RADIO_STATS,3233 3234 NL80211_ATTR_NETNS_FD,3235 3236 NL80211_ATTR_SCHED_SCAN_DELAY,3237 3238 NL80211_ATTR_REG_INDOOR,3239 3240 NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,3241 NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,3242 NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,3243 NL80211_ATTR_SCHED_SCAN_PLANS,3244 3245 NL80211_ATTR_PBSS,3246 3247 NL80211_ATTR_BSS_SELECT,3248 3249 NL80211_ATTR_STA_SUPPORT_P2P_PS,3250 3251 NL80211_ATTR_PAD,3252 3253 NL80211_ATTR_IFTYPE_EXT_CAPA,3254 3255 NL80211_ATTR_MU_MIMO_GROUP_DATA,3256 NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR,3257 3258 NL80211_ATTR_SCAN_START_TIME_TSF,3259 NL80211_ATTR_SCAN_START_TIME_TSF_BSSID,3260 NL80211_ATTR_MEASUREMENT_DURATION,3261 NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY,3262 3263 NL80211_ATTR_MESH_PEER_AID,3264 3265 NL80211_ATTR_NAN_MASTER_PREF,3266 NL80211_ATTR_BANDS,3267 NL80211_ATTR_NAN_FUNC,3268 NL80211_ATTR_NAN_MATCH,3269 3270 NL80211_ATTR_FILS_KEK,3271 NL80211_ATTR_FILS_NONCES,3272 3273 NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED,3274 3275 NL80211_ATTR_BSSID,3276 3277 NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,3278 NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,3279 3280 NL80211_ATTR_TIMEOUT_REASON,3281 3282 NL80211_ATTR_FILS_ERP_USERNAME,3283 NL80211_ATTR_FILS_ERP_REALM,3284 NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM,3285 NL80211_ATTR_FILS_ERP_RRK,3286 NL80211_ATTR_FILS_CACHE_ID,3287 3288 NL80211_ATTR_PMK,3289 3290 NL80211_ATTR_SCHED_SCAN_MULTI,3291 NL80211_ATTR_SCHED_SCAN_MAX_REQS,3292 3293 NL80211_ATTR_WANT_1X_4WAY_HS,3294 NL80211_ATTR_PMKR0_NAME,3295 NL80211_ATTR_PORT_AUTHORIZED,3296 3297 NL80211_ATTR_EXTERNAL_AUTH_ACTION,3298 NL80211_ATTR_EXTERNAL_AUTH_SUPPORT,3299 3300 NL80211_ATTR_NSS,3301 NL80211_ATTR_ACK_SIGNAL,3302 3303 NL80211_ATTR_CONTROL_PORT_OVER_NL80211,3304 3305 NL80211_ATTR_TXQ_STATS,3306 NL80211_ATTR_TXQ_LIMIT,3307 NL80211_ATTR_TXQ_MEMORY_LIMIT,3308 NL80211_ATTR_TXQ_QUANTUM,3309 3310 NL80211_ATTR_HE_CAPABILITY,3311 3312 NL80211_ATTR_FTM_RESPONDER,3313 3314 NL80211_ATTR_FTM_RESPONDER_STATS,3315 3316 NL80211_ATTR_TIMEOUT,3317 3318 NL80211_ATTR_PEER_MEASUREMENTS,3319 3320 NL80211_ATTR_AIRTIME_WEIGHT,3321 NL80211_ATTR_STA_TX_POWER_SETTING,3322 NL80211_ATTR_STA_TX_POWER,3323 3324 NL80211_ATTR_SAE_PASSWORD,3325 3326 NL80211_ATTR_TWT_RESPONDER,3327 3328 NL80211_ATTR_HE_OBSS_PD,3329 3330 NL80211_ATTR_WIPHY_EDMG_CHANNELS,3331 NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,3332 3333 NL80211_ATTR_VLAN_ID,3334 3335 NL80211_ATTR_HE_BSS_COLOR,3336 3337 NL80211_ATTR_IFTYPE_AKM_SUITES,3338 3339 NL80211_ATTR_TID_CONFIG,3340 3341 NL80211_ATTR_CONTROL_PORT_NO_PREAUTH,3342 3343 NL80211_ATTR_PMK_LIFETIME,3344 NL80211_ATTR_PMK_REAUTH_THRESHOLD,3345 3346 NL80211_ATTR_RECEIVE_MULTICAST,3347 NL80211_ATTR_WIPHY_FREQ_OFFSET,3348 NL80211_ATTR_CENTER_FREQ1_OFFSET,3349 NL80211_ATTR_SCAN_FREQ_KHZ,3350 3351 NL80211_ATTR_HE_6GHZ_CAPABILITY,3352 3353 NL80211_ATTR_FILS_DISCOVERY,3354 3355 NL80211_ATTR_UNSOL_BCAST_PROBE_RESP,3356 3357 NL80211_ATTR_S1G_CAPABILITY,3358 NL80211_ATTR_S1G_CAPABILITY_MASK,3359 3360 NL80211_ATTR_SAE_PWE,3361 3362 NL80211_ATTR_RECONNECT_REQUESTED,3363 3364 NL80211_ATTR_SAR_SPEC,3365 3366 NL80211_ATTR_DISABLE_HE,3367 3368 NL80211_ATTR_OBSS_COLOR_BITMAP,3369 3370 NL80211_ATTR_COLOR_CHANGE_COUNT,3371 NL80211_ATTR_COLOR_CHANGE_COLOR,3372 NL80211_ATTR_COLOR_CHANGE_ELEMS,3373 3374 NL80211_ATTR_MBSSID_CONFIG,3375 NL80211_ATTR_MBSSID_ELEMS,3376 3377 NL80211_ATTR_RADAR_BACKGROUND,3378 3379 NL80211_ATTR_AP_SETTINGS_FLAGS,3380 3381 NL80211_ATTR_EHT_CAPABILITY,3382 3383 NL80211_ATTR_DISABLE_EHT,3384 3385 NL80211_ATTR_MLO_LINKS,3386 NL80211_ATTR_MLO_LINK_ID,3387 NL80211_ATTR_MLD_ADDR,3388 3389 NL80211_ATTR_MLO_SUPPORT,3390 3391 NL80211_ATTR_MAX_NUM_AKM_SUITES,3392 3393 NL80211_ATTR_EML_CAPABILITY,3394 NL80211_ATTR_MLD_CAPA_AND_OPS,3395 3396 NL80211_ATTR_TX_HW_TIMESTAMP,3397 NL80211_ATTR_RX_HW_TIMESTAMP,3398 NL80211_ATTR_TD_BITMAP,3399 3400 NL80211_ATTR_PUNCT_BITMAP,3401 3402 NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS,3403 NL80211_ATTR_HW_TIMESTAMP_ENABLED,3404 3405 NL80211_ATTR_EMA_RNR_ELEMS,3406 3407 NL80211_ATTR_MLO_LINK_DISABLED,3408 3409 NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA,3410 3411 NL80211_ATTR_MLO_TTLM_DLINK,3412 NL80211_ATTR_MLO_TTLM_ULINK,3413 3414 NL80211_ATTR_ASSOC_SPP_AMSDU,3415 3416 NL80211_ATTR_WIPHY_RADIOS,3417 NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS,3418 3419 /* add attributes here, update the policy in nl80211.c */3420 3421 __NL80211_ATTR_AFTER_LAST,3422 NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST,3423 NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 13424};3425 3426/* source-level API compatibility */3427#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION3428#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG3429#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER3430#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA3431#define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON3432#define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP3433 3434/*3435 * Allow user space programs to use #ifdef on new attributes by defining them3436 * here3437 */3438#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT3439#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY3440#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES3441#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS3442#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ3443#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE3444#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE3445#define NL80211_ATTR_IE NL80211_ATTR_IE3446#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR3447#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE3448#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME3449#define NL80211_ATTR_SSID NL80211_ATTR_SSID3450#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE3451#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE3452#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE3453#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP3454#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS3455#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES3456#define NL80211_ATTR_KEY NL80211_ATTR_KEY3457#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS3458#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS3459 3460#define NL80211_WIPHY_NAME_MAXLEN 643461 3462#define NL80211_MAX_SUPP_RATES 323463#define NL80211_MAX_SUPP_HT_RATES 773464#define NL80211_MAX_SUPP_REG_RULES 1283465#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 03466#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 163467#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 243468#define NL80211_HT_CAPABILITY_LEN 263469#define NL80211_VHT_CAPABILITY_LEN 123470#define NL80211_HE_MIN_CAPABILITY_LEN 163471#define NL80211_HE_MAX_CAPABILITY_LEN 543472#define NL80211_MAX_NR_CIPHER_SUITES 53473 3474/*3475 * NL80211_MAX_NR_AKM_SUITES is obsolete when %NL80211_ATTR_MAX_NUM_AKM_SUITES3476 * present in %NL80211_CMD_GET_WIPHY response.3477 */3478#define NL80211_MAX_NR_AKM_SUITES 23479#define NL80211_EHT_MIN_CAPABILITY_LEN 133480#define NL80211_EHT_MAX_CAPABILITY_LEN 513481 3482#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 103483 3484/* default RSSI threshold for scan results if none specified. */3485#define NL80211_SCAN_RSSI_THOLD_OFF -3003486 3487#define NL80211_CQM_TXE_MAX_INTVL 18003488 3489/**3490 * enum nl80211_iftype - (virtual) interface types3491 *3492 * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides3493 * @NL80211_IFTYPE_ADHOC: independent BSS member3494 * @NL80211_IFTYPE_STATION: managed BSS member3495 * @NL80211_IFTYPE_AP: access point3496 * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces3497 * are a bit special in that they must always be tied to a pre-existing3498 * AP type interface.3499 * @NL80211_IFTYPE_WDS: wireless distribution interface3500 * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames3501 * @NL80211_IFTYPE_MESH_POINT: mesh point3502 * @NL80211_IFTYPE_P2P_CLIENT: P2P client3503 * @NL80211_IFTYPE_P2P_GO: P2P group owner3504 * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev3505 * and therefore can't be created in the normal ways, use the3506 * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE3507 * commands to create and destroy one3508 * @NL80211_IFTYPE_OCB: Outside Context of a BSS3509 * This mode corresponds to the MIB variable dot11OCBActivated=true3510 * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev)3511 * @NL80211_IFTYPE_MAX: highest interface type number currently defined3512 * @NUM_NL80211_IFTYPES: number of defined interface types3513 *3514 * These values are used with the %NL80211_ATTR_IFTYPE3515 * to set the type of an interface.3516 *3517 */3518enum nl80211_iftype {3519 NL80211_IFTYPE_UNSPECIFIED,3520 NL80211_IFTYPE_ADHOC,3521 NL80211_IFTYPE_STATION,3522 NL80211_IFTYPE_AP,3523 NL80211_IFTYPE_AP_VLAN,3524 NL80211_IFTYPE_WDS,3525 NL80211_IFTYPE_MONITOR,3526 NL80211_IFTYPE_MESH_POINT,3527 NL80211_IFTYPE_P2P_CLIENT,3528 NL80211_IFTYPE_P2P_GO,3529 NL80211_IFTYPE_P2P_DEVICE,3530 NL80211_IFTYPE_OCB,3531 NL80211_IFTYPE_NAN,3532 3533 /* keep last */3534 NUM_NL80211_IFTYPES,3535 NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 13536};3537 3538/**3539 * enum nl80211_sta_flags - station flags3540 *3541 * Station flags. When a station is added to an AP interface, it is3542 * assumed to be already associated (and hence authenticated.)3543 *3544 * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved3545 * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)3546 * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames3547 * with short barker preamble3548 * @NL80211_STA_FLAG_WME: station is WME/QoS capable3549 * @NL80211_STA_FLAG_MFP: station uses management frame protection3550 * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated3551 * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should3552 * only be used in managed mode (even in the flags mask). Note that the3553 * flag can't be changed, it is only valid while adding a station, and3554 * attempts to change it will silently be ignored (rather than rejected3555 * as errors.)3556 * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers3557 * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a3558 * previously added station into associated state3559 * @NL80211_STA_FLAG_SPP_AMSDU: station supports SPP A-MSDUs3560 * @NL80211_STA_FLAG_MAX: highest station flag number currently defined3561 * @__NL80211_STA_FLAG_AFTER_LAST: internal use3562 */3563enum nl80211_sta_flags {3564 __NL80211_STA_FLAG_INVALID,3565 NL80211_STA_FLAG_AUTHORIZED,3566 NL80211_STA_FLAG_SHORT_PREAMBLE,3567 NL80211_STA_FLAG_WME,3568 NL80211_STA_FLAG_MFP,3569 NL80211_STA_FLAG_AUTHENTICATED,3570 NL80211_STA_FLAG_TDLS_PEER,3571 NL80211_STA_FLAG_ASSOCIATED,3572 NL80211_STA_FLAG_SPP_AMSDU,3573 3574 /* keep last */3575 __NL80211_STA_FLAG_AFTER_LAST,3576 NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 13577};3578 3579/**3580 * enum nl80211_sta_p2p_ps_status - station support of P2P PS3581 *3582 * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism3583 * @NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism3584 * @NUM_NL80211_P2P_PS_STATUS: number of values3585 */3586enum nl80211_sta_p2p_ps_status {3587 NL80211_P2P_PS_UNSUPPORTED = 0,3588 NL80211_P2P_PS_SUPPORTED,3589 3590 NUM_NL80211_P2P_PS_STATUS,3591};3592 3593#define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER3594 3595/**3596 * struct nl80211_sta_flag_update - station flags mask/set3597 * @mask: mask of station flags to set3598 * @set: which values to set them to3599 *3600 * Both mask and set contain bits as per &enum nl80211_sta_flags.3601 */3602struct nl80211_sta_flag_update {3603 __u32 mask;3604 __u32 set;3605} __attribute__((packed));3606 3607/**3608 * enum nl80211_he_gi - HE guard interval3609 * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec3610 * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec3611 * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec3612 */3613enum nl80211_he_gi {3614 NL80211_RATE_INFO_HE_GI_0_8,3615 NL80211_RATE_INFO_HE_GI_1_6,3616 NL80211_RATE_INFO_HE_GI_3_2,3617};3618 3619/**3620 * enum nl80211_he_ltf - HE long training field3621 * @NL80211_RATE_INFO_HE_1XLTF: 3.2 usec3622 * @NL80211_RATE_INFO_HE_2XLTF: 6.4 usec3623 * @NL80211_RATE_INFO_HE_4XLTF: 12.8 usec3624 */3625enum nl80211_he_ltf {3626 NL80211_RATE_INFO_HE_1XLTF,3627 NL80211_RATE_INFO_HE_2XLTF,3628 NL80211_RATE_INFO_HE_4XLTF,3629};3630 3631/**3632 * enum nl80211_he_ru_alloc - HE RU allocation values3633 * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation3634 * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation3635 * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation3636 * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation3637 * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation3638 * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation3639 * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation3640 */3641enum nl80211_he_ru_alloc {3642 NL80211_RATE_INFO_HE_RU_ALLOC_26,3643 NL80211_RATE_INFO_HE_RU_ALLOC_52,3644 NL80211_RATE_INFO_HE_RU_ALLOC_106,3645 NL80211_RATE_INFO_HE_RU_ALLOC_242,3646 NL80211_RATE_INFO_HE_RU_ALLOC_484,3647 NL80211_RATE_INFO_HE_RU_ALLOC_996,3648 NL80211_RATE_INFO_HE_RU_ALLOC_2x996,3649};3650 3651/**3652 * enum nl80211_eht_gi - EHT guard interval3653 * @NL80211_RATE_INFO_EHT_GI_0_8: 0.8 usec3654 * @NL80211_RATE_INFO_EHT_GI_1_6: 1.6 usec3655 * @NL80211_RATE_INFO_EHT_GI_3_2: 3.2 usec3656 */3657enum nl80211_eht_gi {3658 NL80211_RATE_INFO_EHT_GI_0_8,3659 NL80211_RATE_INFO_EHT_GI_1_6,3660 NL80211_RATE_INFO_EHT_GI_3_2,3661};3662 3663/**3664 * enum nl80211_eht_ru_alloc - EHT RU allocation values3665 * @NL80211_RATE_INFO_EHT_RU_ALLOC_26: 26-tone RU allocation3666 * @NL80211_RATE_INFO_EHT_RU_ALLOC_52: 52-tone RU allocation3667 * @NL80211_RATE_INFO_EHT_RU_ALLOC_52P26: 52+26-tone RU allocation3668 * @NL80211_RATE_INFO_EHT_RU_ALLOC_106: 106-tone RU allocation3669 * @NL80211_RATE_INFO_EHT_RU_ALLOC_106P26: 106+26 tone RU allocation3670 * @NL80211_RATE_INFO_EHT_RU_ALLOC_242: 242-tone RU allocation3671 * @NL80211_RATE_INFO_EHT_RU_ALLOC_484: 484-tone RU allocation3672 * @NL80211_RATE_INFO_EHT_RU_ALLOC_484P242: 484+242 tone RU allocation3673 * @NL80211_RATE_INFO_EHT_RU_ALLOC_996: 996-tone RU allocation3674 * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484: 996+484 tone RU allocation3675 * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242: 996+484+242 tone RU allocation3676 * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996: 2x996-tone RU allocation3677 * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484: 2x996+484 tone RU allocation3678 * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996: 3x996-tone RU allocation3679 * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484: 3x996+484 tone RU allocation3680 * @NL80211_RATE_INFO_EHT_RU_ALLOC_4x996: 4x996-tone RU allocation3681 */3682enum nl80211_eht_ru_alloc {3683 NL80211_RATE_INFO_EHT_RU_ALLOC_26,3684 NL80211_RATE_INFO_EHT_RU_ALLOC_52,3685 NL80211_RATE_INFO_EHT_RU_ALLOC_52P26,3686 NL80211_RATE_INFO_EHT_RU_ALLOC_106,3687 NL80211_RATE_INFO_EHT_RU_ALLOC_106P26,3688 NL80211_RATE_INFO_EHT_RU_ALLOC_242,3689 NL80211_RATE_INFO_EHT_RU_ALLOC_484,3690 NL80211_RATE_INFO_EHT_RU_ALLOC_484P242,3691 NL80211_RATE_INFO_EHT_RU_ALLOC_996,3692 NL80211_RATE_INFO_EHT_RU_ALLOC_996P484,3693 NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242,3694 NL80211_RATE_INFO_EHT_RU_ALLOC_2x996,3695 NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484,3696 NL80211_RATE_INFO_EHT_RU_ALLOC_3x996,3697 NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484,3698 NL80211_RATE_INFO_EHT_RU_ALLOC_4x996,3699};3700 3701/**3702 * enum nl80211_rate_info - bitrate information3703 *3704 * These attribute types are used with %NL80211_STA_INFO_TXRATE3705 * when getting information about the bitrate of a station.3706 * There are 2 attributes for bitrate, a legacy one that represents3707 * a 16-bit value, and new one that represents a 32-bit value.3708 * If the rate value fits into 16 bit, both attributes are reported3709 * with the same value. If the rate is too high to fit into 16 bits3710 * (>6.5535Gbps) only 32-bit attribute is included.3711 * User space tools encouraged to use the 32-bit attribute and fall3712 * back to the 16-bit one for compatibility with older kernels.3713 *3714 * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved3715 * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)3716 * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)3717 * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate3718 * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval3719 * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s)3720 * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined3721 * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)3722 * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)3723 * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate3724 * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the3725 * same as 160 for purposes of the bitrates3726 * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate3727 * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is3728 * a legacy rate and will be reported as the actual bitrate, i.e.3729 * half the base (20 MHz) rate3730 * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is3731 * a legacy rate and will be reported as the actual bitrate, i.e.3732 * a quarter of the base (20 MHz) rate3733 * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11)3734 * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8)3735 * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier3736 * (u8, see &enum nl80211_he_gi)3737 * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)3738 * @NL80211_RATE_INFO_HE_RU_ALLOC: HE RU allocation, if not present then3739 * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)3740 * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate3741 * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15)3742 * @NL80211_RATE_INFO_EHT_NSS: EHT NSS value (u8, 1-8)3743 * @NL80211_RATE_INFO_EHT_GI: EHT guard interval identifier3744 * (u8, see &enum nl80211_eht_gi)3745 * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then3746 * non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc)3747 * @NL80211_RATE_INFO_S1G_MCS: S1G MCS index (u8, 0-10)3748 * @NL80211_RATE_INFO_S1G_NSS: S1G NSS value (u8, 1-4)3749 * @NL80211_RATE_INFO_1_MHZ_WIDTH: 1 MHz S1G rate3750 * @NL80211_RATE_INFO_2_MHZ_WIDTH: 2 MHz S1G rate3751 * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate3752 * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate3753 * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate3754 * @__NL80211_RATE_INFO_AFTER_LAST: internal use3755 */3756enum nl80211_rate_info {3757 __NL80211_RATE_INFO_INVALID,3758 NL80211_RATE_INFO_BITRATE,3759 NL80211_RATE_INFO_MCS,3760 NL80211_RATE_INFO_40_MHZ_WIDTH,3761 NL80211_RATE_INFO_SHORT_GI,3762 NL80211_RATE_INFO_BITRATE32,3763 NL80211_RATE_INFO_VHT_MCS,3764 NL80211_RATE_INFO_VHT_NSS,3765 NL80211_RATE_INFO_80_MHZ_WIDTH,3766 NL80211_RATE_INFO_80P80_MHZ_WIDTH,3767 NL80211_RATE_INFO_160_MHZ_WIDTH,3768 NL80211_RATE_INFO_10_MHZ_WIDTH,3769 NL80211_RATE_INFO_5_MHZ_WIDTH,3770 NL80211_RATE_INFO_HE_MCS,3771 NL80211_RATE_INFO_HE_NSS,3772 NL80211_RATE_INFO_HE_GI,3773 NL80211_RATE_INFO_HE_DCM,3774 NL80211_RATE_INFO_HE_RU_ALLOC,3775 NL80211_RATE_INFO_320_MHZ_WIDTH,3776 NL80211_RATE_INFO_EHT_MCS,3777 NL80211_RATE_INFO_EHT_NSS,3778 NL80211_RATE_INFO_EHT_GI,3779 NL80211_RATE_INFO_EHT_RU_ALLOC,3780 NL80211_RATE_INFO_S1G_MCS,3781 NL80211_RATE_INFO_S1G_NSS,3782 NL80211_RATE_INFO_1_MHZ_WIDTH,3783 NL80211_RATE_INFO_2_MHZ_WIDTH,3784 NL80211_RATE_INFO_4_MHZ_WIDTH,3785 NL80211_RATE_INFO_8_MHZ_WIDTH,3786 NL80211_RATE_INFO_16_MHZ_WIDTH,3787 3788 /* keep last */3789 __NL80211_RATE_INFO_AFTER_LAST,3790 NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 13791};3792 3793/**3794 * enum nl80211_sta_bss_param - BSS information collected by STA3795 *3796 * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM3797 * when getting information about the bitrate of a station.3798 *3799 * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved3800 * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)3801 * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled3802 * (flag)3803 * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled3804 * (flag)3805 * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)3806 * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)3807 * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined3808 * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use3809 */3810enum nl80211_sta_bss_param {3811 __NL80211_STA_BSS_PARAM_INVALID,3812 NL80211_STA_BSS_PARAM_CTS_PROT,3813 NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,3814 NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,3815 NL80211_STA_BSS_PARAM_DTIM_PERIOD,3816 NL80211_STA_BSS_PARAM_BEACON_INTERVAL,3817 3818 /* keep last */3819 __NL80211_STA_BSS_PARAM_AFTER_LAST,3820 NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 13821};3822 3823/**3824 * enum nl80211_sta_info - station information3825 *3826 * These attribute types are used with %NL80211_ATTR_STA_INFO3827 * when getting information about a station.3828 *3829 * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved3830 * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)3831 * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length)3832 * (u32, from this station)3833 * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length)3834 * (u32, to this station)3835 * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length)3836 * (u64, from this station)3837 * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length)3838 * (u64, to this station)3839 * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)3840 * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute3841 * containing info as possible, see &enum nl80211_rate_info3842 * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)3843 * (u32, from this station)3844 * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)3845 * (u32, to this station)3846 * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station)3847 * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs)3848 * (u32, to this station)3849 * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)3850 * @NL80211_STA_INFO_LLID: the station's mesh LLID3851 * @NL80211_STA_INFO_PLID: the station's mesh PLID3852 * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station3853 * (see %enum nl80211_plink_state)3854 * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested3855 * attribute, like NL80211_STA_INFO_TX_BITRATE.3856 * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute3857 * containing info as possible, see &enum nl80211_sta_bss_param3858 * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected3859 * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.3860 * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)3861 * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)3862 * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode3863 * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode3864 * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards3865 * non-peer STA3866 * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU3867 * Contains a nested array of signal strength attributes (u8, dBm)3868 * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average3869 * Same format as NL80211_STA_INFO_CHAIN_SIGNAL.3870 * @NL80211_STA_INFO_EXPECTED_THROUGHPUT: expected throughput considering also3871 * the 802.11 header (u32, kbps)3872 * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons3873 * (u64)3874 * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)3875 * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average3876 * for beacons only (u8, dBm)3877 * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats)3878 * This is a nested attribute where each the inner attribute number is the3879 * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;3880 * each one of those is again nested with &enum nl80211_tid_stats3881 * attributes carrying the actual values.3882 * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames3883 * received from the station (u64, usec)3884 * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment3885 * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm)3886 * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm)3887 * @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs)3888 * (u32, from this station)3889 * @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received3890 * with an FCS error (u32, from this station). This count may not include3891 * some packets with an FCS error due to TA corruption. Hence this counter3892 * might not be fully accurate.3893 * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a3894 * mesh gate (u8, 0 or 1)3895 * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames3896 * sent to the station (u64, usec)3897 * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16)3898 * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station3899 * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds)3900 * of STA's association3901 * @NL80211_STA_INFO_CONNECTED_TO_AS: set to true if STA has a path to a3902 * authentication server (u8, 0 or 1)3903 * @__NL80211_STA_INFO_AFTER_LAST: internal3904 * @NL80211_STA_INFO_MAX: highest possible station info attribute3905 */3906enum nl80211_sta_info {3907 __NL80211_STA_INFO_INVALID,3908 NL80211_STA_INFO_INACTIVE_TIME,3909 NL80211_STA_INFO_RX_BYTES,3910 NL80211_STA_INFO_TX_BYTES,3911 NL80211_STA_INFO_LLID,3912 NL80211_STA_INFO_PLID,3913 NL80211_STA_INFO_PLINK_STATE,3914 NL80211_STA_INFO_SIGNAL,3915 NL80211_STA_INFO_TX_BITRATE,3916 NL80211_STA_INFO_RX_PACKETS,3917 NL80211_STA_INFO_TX_PACKETS,3918 NL80211_STA_INFO_TX_RETRIES,3919 NL80211_STA_INFO_TX_FAILED,3920 NL80211_STA_INFO_SIGNAL_AVG,3921 NL80211_STA_INFO_RX_BITRATE,3922 NL80211_STA_INFO_BSS_PARAM,3923 NL80211_STA_INFO_CONNECTED_TIME,3924 NL80211_STA_INFO_STA_FLAGS,3925 NL80211_STA_INFO_BEACON_LOSS,3926 NL80211_STA_INFO_T_OFFSET,3927 NL80211_STA_INFO_LOCAL_PM,3928 NL80211_STA_INFO_PEER_PM,3929 NL80211_STA_INFO_NONPEER_PM,3930 NL80211_STA_INFO_RX_BYTES64,3931 NL80211_STA_INFO_TX_BYTES64,3932 NL80211_STA_INFO_CHAIN_SIGNAL,3933 NL80211_STA_INFO_CHAIN_SIGNAL_AVG,3934 NL80211_STA_INFO_EXPECTED_THROUGHPUT,3935 NL80211_STA_INFO_RX_DROP_MISC,3936 NL80211_STA_INFO_BEACON_RX,3937 NL80211_STA_INFO_BEACON_SIGNAL_AVG,3938 NL80211_STA_INFO_TID_STATS,3939 NL80211_STA_INFO_RX_DURATION,3940 NL80211_STA_INFO_PAD,3941 NL80211_STA_INFO_ACK_SIGNAL,3942 NL80211_STA_INFO_ACK_SIGNAL_AVG,3943 NL80211_STA_INFO_RX_MPDUS,3944 NL80211_STA_INFO_FCS_ERROR_COUNT,3945 NL80211_STA_INFO_CONNECTED_TO_GATE,3946 NL80211_STA_INFO_TX_DURATION,3947 NL80211_STA_INFO_AIRTIME_WEIGHT,3948 NL80211_STA_INFO_AIRTIME_LINK_METRIC,3949 NL80211_STA_INFO_ASSOC_AT_BOOTTIME,3950 NL80211_STA_INFO_CONNECTED_TO_AS,3951 3952 /* keep last */3953 __NL80211_STA_INFO_AFTER_LAST,3954 NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 13955};3956 3957/* we renamed this - stay compatible */3958#define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG3959 3960 3961/**3962 * enum nl80211_tid_stats - per TID statistics attributes3963 * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved3964 * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64)3965 * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or3966 * attempted to transmit; u64)3967 * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for3968 * transmitted MSDUs (not counting the first attempt; u64)3969 * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted3970 * MSDUs (u64)3971 * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment3972 * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute)3973 * @NUM_NL80211_TID_STATS: number of attributes here3974 * @NL80211_TID_STATS_MAX: highest numbered attribute here3975 */3976enum nl80211_tid_stats {3977 __NL80211_TID_STATS_INVALID,3978 NL80211_TID_STATS_RX_MSDU,3979 NL80211_TID_STATS_TX_MSDU,3980 NL80211_TID_STATS_TX_MSDU_RETRIES,3981 NL80211_TID_STATS_TX_MSDU_FAILED,3982 NL80211_TID_STATS_PAD,3983 NL80211_TID_STATS_TXQ_STATS,3984 3985 /* keep last */3986 NUM_NL80211_TID_STATS,3987 NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 13988};3989 3990/**3991 * enum nl80211_txq_stats - per TXQ statistics attributes3992 * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved3993 * @NUM_NL80211_TXQ_STATS: number of attributes here3994 * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged3995 * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently3996 * backlogged3997 * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen3998 * @NL80211_TXQ_STATS_DROPS: total number of packet drops3999 * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks4000 * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow4001 * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow4002 * (only for per-phy stats)4003 * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions4004 * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ4005 * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ4006 * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY4007 * @NL80211_TXQ_STATS_MAX: highest numbered attribute here4008 */4009enum nl80211_txq_stats {4010 __NL80211_TXQ_STATS_INVALID,4011 NL80211_TXQ_STATS_BACKLOG_BYTES,4012 NL80211_TXQ_STATS_BACKLOG_PACKETS,4013 NL80211_TXQ_STATS_FLOWS,4014 NL80211_TXQ_STATS_DROPS,4015 NL80211_TXQ_STATS_ECN_MARKS,4016 NL80211_TXQ_STATS_OVERLIMIT,4017 NL80211_TXQ_STATS_OVERMEMORY,4018 NL80211_TXQ_STATS_COLLISIONS,4019 NL80211_TXQ_STATS_TX_BYTES,4020 NL80211_TXQ_STATS_TX_PACKETS,4021 NL80211_TXQ_STATS_MAX_FLOWS,4022 4023 /* keep last */4024 NUM_NL80211_TXQ_STATS,4025 NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 14026};4027 4028/**4029 * enum nl80211_mpath_flags - nl80211 mesh path flags4030 *4031 * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active4032 * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running4033 * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN4034 * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set4035 * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded4036 */4037enum nl80211_mpath_flags {4038 NL80211_MPATH_FLAG_ACTIVE = 1<<0,4039 NL80211_MPATH_FLAG_RESOLVING = 1<<1,4040 NL80211_MPATH_FLAG_SN_VALID = 1<<2,4041 NL80211_MPATH_FLAG_FIXED = 1<<3,4042 NL80211_MPATH_FLAG_RESOLVED = 1<<4,4043};4044 4045/**4046 * enum nl80211_mpath_info - mesh path information4047 *4048 * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting4049 * information about a mesh path.4050 *4051 * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved4052 * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination4053 * @NL80211_MPATH_INFO_SN: destination sequence number4054 * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path4055 * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now4056 * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in4057 * &enum nl80211_mpath_flags;4058 * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec4059 * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries4060 * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination4061 * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination4062 * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number4063 * currently defined4064 * @__NL80211_MPATH_INFO_AFTER_LAST: internal use4065 */4066enum nl80211_mpath_info {4067 __NL80211_MPATH_INFO_INVALID,4068 NL80211_MPATH_INFO_FRAME_QLEN,4069 NL80211_MPATH_INFO_SN,4070 NL80211_MPATH_INFO_METRIC,4071 NL80211_MPATH_INFO_EXPTIME,4072 NL80211_MPATH_INFO_FLAGS,4073 NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,4074 NL80211_MPATH_INFO_DISCOVERY_RETRIES,4075 NL80211_MPATH_INFO_HOP_COUNT,4076 NL80211_MPATH_INFO_PATH_CHANGE,4077 4078 /* keep last */4079 __NL80211_MPATH_INFO_AFTER_LAST,4080 NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 14081};4082 4083/**4084 * enum nl80211_band_iftype_attr - Interface type data attributes4085 *4086 * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved4087 * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute4088 * for each interface type that supports the band data4089 * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE4090 * capabilities IE4091 * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE4092 * capabilities IE4093 * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE4094 * capabilities IE4095 * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as4096 * defined in HE capabilities IE4097 * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16),4098 * given for all 6 GHz band channels4099 * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are4100 * advertised on this band/for this iftype (binary)4101 * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC: EHT MAC capabilities as in EHT4102 * capabilities element4103 * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY: EHT PHY capabilities as in EHT4104 * capabilities element4105 * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET: EHT supported NSS/MCS as in EHT4106 * capabilities element4107 * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as4108 * defined in EHT capabilities element4109 * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use4110 * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined4111 */4112enum nl80211_band_iftype_attr {4113 __NL80211_BAND_IFTYPE_ATTR_INVALID,4114 4115 NL80211_BAND_IFTYPE_ATTR_IFTYPES,4116 NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC,4117 NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY,4118 NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,4119 NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,4120 NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA,4121 NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS,4122 NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC,4123 NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY,4124 NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET,4125 NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE,4126 4127 /* keep last */4128 __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,4129 NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 14130};4131 4132/**4133 * enum nl80211_band_attr - band attributes4134 * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved4135 * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,4136 * an array of nested frequency attributes4137 * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,4138 * an array of nested bitrate attributes4139 * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as4140 * defined in 802.11n4141 * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE4142 * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n4143 * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n4144 * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as4145 * defined in 802.11ac4146 * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE4147 * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using4148 * attributes from &enum nl80211_band_iftype_attr4149 * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz4150 * channel(s) that are allowed to be used for EDMG transmissions.4151 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251.4152 * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes4153 * the allowed channel bandwidth configurations.4154 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.4155 * @NL80211_BAND_ATTR_S1G_MCS_NSS_SET: S1G capabilities, supported S1G-MCS and NSS4156 * set subfield, as in the S1G information IE, 5 bytes4157 * @NL80211_BAND_ATTR_S1G_CAPA: S1G capabilities information subfield as in the4158 * S1G information IE, 10 bytes4159 * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined4160 * @__NL80211_BAND_ATTR_AFTER_LAST: internal use4161 */4162enum nl80211_band_attr {4163 __NL80211_BAND_ATTR_INVALID,4164 NL80211_BAND_ATTR_FREQS,4165 NL80211_BAND_ATTR_RATES,4166 4167 NL80211_BAND_ATTR_HT_MCS_SET,4168 NL80211_BAND_ATTR_HT_CAPA,4169 NL80211_BAND_ATTR_HT_AMPDU_FACTOR,4170 NL80211_BAND_ATTR_HT_AMPDU_DENSITY,4171 4172 NL80211_BAND_ATTR_VHT_MCS_SET,4173 NL80211_BAND_ATTR_VHT_CAPA,4174 NL80211_BAND_ATTR_IFTYPE_DATA,4175 4176 NL80211_BAND_ATTR_EDMG_CHANNELS,4177 NL80211_BAND_ATTR_EDMG_BW_CONFIG,4178 4179 NL80211_BAND_ATTR_S1G_MCS_NSS_SET,4180 NL80211_BAND_ATTR_S1G_CAPA,4181 4182 /* keep last */4183 __NL80211_BAND_ATTR_AFTER_LAST,4184 NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 14185};4186 4187#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA4188 4189/**4190 * enum nl80211_wmm_rule - regulatory wmm rule4191 *4192 * @__NL80211_WMMR_INVALID: attribute number 0 is reserved4193 * @NL80211_WMMR_CW_MIN: Minimum contention window slot.4194 * @NL80211_WMMR_CW_MAX: Maximum contention window slot.4195 * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space.4196 * @NL80211_WMMR_TXOP: Maximum allowed tx operation time.4197 * @NL80211_WMMR_MAX: highest possible wmm rule.4198 * @__NL80211_WMMR_LAST: Internal use.4199 */4200enum nl80211_wmm_rule {4201 __NL80211_WMMR_INVALID,4202 NL80211_WMMR_CW_MIN,4203 NL80211_WMMR_CW_MAX,4204 NL80211_WMMR_AIFSN,4205 NL80211_WMMR_TXOP,4206 4207 /* keep last */4208 __NL80211_WMMR_LAST,4209 NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 14210};4211 4212/**4213 * enum nl80211_frequency_attr - frequency attributes4214 * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved4215 * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz4216 * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current4217 * regulatory domain.4218 * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation4219 * are permitted on this channel, this includes sending probe4220 * requests, or modes of operation that require beaconing.4221 * @__NL80211_FREQUENCY_ATTR_NO_IBSS: obsolete, same as _NO_IR4222 * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory4223 * on this channel in current regulatory domain.4224 * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm4225 * (100 * dBm).4226 * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS4227 * (enum nl80211_dfs_state)4228 * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in milliseconds for how long4229 * this channel is in this DFS state.4230 * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this4231 * channel as the control channel4232 * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this4233 * channel as the control channel4234 * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel4235 * as the primary or any of the secondary channels isn't possible,4236 * this includes 80+80 channels4237 * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel4238 * using this channel as the primary or any of the secondary channels4239 * isn't possible4240 * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.4241 * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this4242 * channel. A channel that has the INDOOR_ONLY attribute can only be4243 * used when there is a clear assessment that the device is operating in4244 * an indoor surroundings, i.e., it is connected to AC power (and not4245 * through portable DC inverters) or is under the control of a master4246 * that is acting as an AP and is connected to AC power.4247 * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this4248 * channel if it's connected concurrently to a BSS on the same channel on4249 * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz4250 * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS4251 * off-channel on a channel that has the IR_CONCURRENT attribute set can be4252 * done when there is a clear assessment that the device is operating under4253 * the guidance of an authorized master, i.e., setting up a GO or TDLS4254 * off-channel while the device is also connected to an AP with DFS and4255 * radar detection on the UNII band (it is up to user-space, i.e.,4256 * wpa_supplicant to perform the required verifications). Using this4257 * attribute for IR is disallowed for master interfaces (IBSS, AP).4258 * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed4259 * on this channel in current regulatory domain.4260 * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed4261 * on this channel in current regulatory domain.4262 * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations.4263 * This is a nested attribute that contains the wmm limitation per AC.4264 * (see &enum nl80211_wmm_rule)4265 * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel4266 * in current regulatory domain.4267 * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz4268 * @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed4269 * on this channel in current regulatory domain.4270 * @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed4271 * on this channel in current regulatory domain.4272 * @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed4273 * on this channel in current regulatory domain.4274 * @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed4275 * on this channel in current regulatory domain.4276 * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed4277 * on this channel in current regulatory domain.4278 * @NL80211_FREQUENCY_ATTR_NO_320MHZ: any 320 MHz channel using this channel4279 * as the primary or any of the secondary channels isn't possible4280 * @NL80211_FREQUENCY_ATTR_NO_EHT: EHT operation is not allowed on this channel4281 * in current regulatory domain.4282 * @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that4283 * is allowed on this channel in current regulatory domain.4284 * @NL80211_FREQUENCY_ATTR_DFS_CONCURRENT: Operation on this channel is4285 * allowed for peer-to-peer or adhoc communication under the control4286 * of a DFS master which operates on the same channel (FCC-594280 D014287 * Section B.3). Should be used together with %NL80211_RRF_DFS only.4288 * @NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP4289 * not allowed using this channel4290 * @NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP4291 * not allowed using this channel4292 * @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor4293 * mode despite other (regulatory) restrictions, even if the channel is4294 * otherwise completely disabled.4295 * @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a4296 * very low power (VLP) AP, despite being NO_IR.4297 * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number4298 * currently defined4299 * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use4300 *4301 * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=5281224302 * for more information on the FCC description of the relaxations allowed4303 * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and4304 * NL80211_FREQUENCY_ATTR_IR_CONCURRENT.4305 */4306enum nl80211_frequency_attr {4307 __NL80211_FREQUENCY_ATTR_INVALID,4308 NL80211_FREQUENCY_ATTR_FREQ,4309 NL80211_FREQUENCY_ATTR_DISABLED,4310 NL80211_FREQUENCY_ATTR_NO_IR,4311 __NL80211_FREQUENCY_ATTR_NO_IBSS,4312 NL80211_FREQUENCY_ATTR_RADAR,4313 NL80211_FREQUENCY_ATTR_MAX_TX_POWER,4314 NL80211_FREQUENCY_ATTR_DFS_STATE,4315 NL80211_FREQUENCY_ATTR_DFS_TIME,4316 NL80211_FREQUENCY_ATTR_NO_HT40_MINUS,4317 NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,4318 NL80211_FREQUENCY_ATTR_NO_80MHZ,4319 NL80211_FREQUENCY_ATTR_NO_160MHZ,4320 NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,4321 NL80211_FREQUENCY_ATTR_INDOOR_ONLY,4322 NL80211_FREQUENCY_ATTR_IR_CONCURRENT,4323 NL80211_FREQUENCY_ATTR_NO_20MHZ,4324 NL80211_FREQUENCY_ATTR_NO_10MHZ,4325 NL80211_FREQUENCY_ATTR_WMM,4326 NL80211_FREQUENCY_ATTR_NO_HE,4327 NL80211_FREQUENCY_ATTR_OFFSET,4328 NL80211_FREQUENCY_ATTR_1MHZ,4329 NL80211_FREQUENCY_ATTR_2MHZ,4330 NL80211_FREQUENCY_ATTR_4MHZ,4331 NL80211_FREQUENCY_ATTR_8MHZ,4332 NL80211_FREQUENCY_ATTR_16MHZ,4333 NL80211_FREQUENCY_ATTR_NO_320MHZ,4334 NL80211_FREQUENCY_ATTR_NO_EHT,4335 NL80211_FREQUENCY_ATTR_PSD,4336 NL80211_FREQUENCY_ATTR_DFS_CONCURRENT,4337 NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT,4338 NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT,4339 NL80211_FREQUENCY_ATTR_CAN_MONITOR,4340 NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP,4341 4342 /* keep last */4343 __NL80211_FREQUENCY_ATTR_AFTER_LAST,4344 NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 14345};4346 4347#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER4348#define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR4349#define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR4350#define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR4351#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \4352 NL80211_FREQUENCY_ATTR_IR_CONCURRENT4353#define NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT \4354 NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT4355#define NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT \4356 NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT4357 4358/**4359 * enum nl80211_bitrate_attr - bitrate attributes4360 * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved4361 * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps4362 * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported4363 * in 2.4 GHz band.4364 * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number4365 * currently defined4366 * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use4367 */4368enum nl80211_bitrate_attr {4369 __NL80211_BITRATE_ATTR_INVALID,4370 NL80211_BITRATE_ATTR_RATE,4371 NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,4372 4373 /* keep last */4374 __NL80211_BITRATE_ATTR_AFTER_LAST,4375 NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 14376};4377 4378/**4379 * enum nl80211_reg_initiator - Indicates the initiator of a reg domain request4380 * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world4381 * regulatory domain.4382 * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the4383 * regulatory domain.4384 * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the4385 * wireless core it thinks its knows the regulatory domain we should be in.4386 * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an4387 * 802.11 country information element with regulatory information it4388 * thinks we should consider. cfg80211 only processes the country4389 * code from the IE, and relies on the regulatory domain information4390 * structure passed by userspace (CRDA) from our wireless-regdb.4391 * If a channel is enabled but the country code indicates it should4392 * be disabled we disable the channel and re-enable it upon disassociation.4393 */4394enum nl80211_reg_initiator {4395 NL80211_REGDOM_SET_BY_CORE,4396 NL80211_REGDOM_SET_BY_USER,4397 NL80211_REGDOM_SET_BY_DRIVER,4398 NL80211_REGDOM_SET_BY_COUNTRY_IE,4399};4400 4401/**4402 * enum nl80211_reg_type - specifies the type of regulatory domain4403 * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains4404 * to a specific country. When this is set you can count on the4405 * ISO / IEC 3166 alpha2 country code being valid.4406 * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory4407 * domain.4408 * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom4409 * driver specific world regulatory domain. These do not apply system-wide4410 * and are only applicable to the individual devices which have requested4411 * them to be applied.4412 * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product4413 * of an intersection between two regulatory domains -- the previously4414 * set regulatory domain on the system and the last accepted regulatory4415 * domain request to be processed.4416 */4417enum nl80211_reg_type {4418 NL80211_REGDOM_TYPE_COUNTRY,4419 NL80211_REGDOM_TYPE_WORLD,4420 NL80211_REGDOM_TYPE_CUSTOM_WORLD,4421 NL80211_REGDOM_TYPE_INTERSECTION,4422};4423 4424/**4425 * enum nl80211_reg_rule_attr - regulatory rule attributes4426 * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved4427 * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional4428 * considerations for a given frequency range. These are the4429 * &enum nl80211_reg_rule_flags.4430 * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory4431 * rule in KHz. This is not a center of frequency but an actual regulatory4432 * band edge.4433 * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule4434 * in KHz. This is not a center a frequency but an actual regulatory4435 * band edge.4436 * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this4437 * frequency range, in KHz.4438 * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain4439 * for a given frequency range. The value is in mBi (100 * dBi).4440 * If you don't have one then don't send this.4441 * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for4442 * a given frequency range. The value is in mBm (100 * dBm).4443 * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.4444 * If not present or 0 default CAC time will be used.4445 * @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm).4446 * This could be negative.4447 * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number4448 * currently defined4449 * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use4450 */4451enum nl80211_reg_rule_attr {4452 __NL80211_REG_RULE_ATTR_INVALID,4453 NL80211_ATTR_REG_RULE_FLAGS,4454 4455 NL80211_ATTR_FREQ_RANGE_START,4456 NL80211_ATTR_FREQ_RANGE_END,4457 NL80211_ATTR_FREQ_RANGE_MAX_BW,4458 4459 NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,4460 NL80211_ATTR_POWER_RULE_MAX_EIRP,4461 4462 NL80211_ATTR_DFS_CAC_TIME,4463 4464 NL80211_ATTR_POWER_RULE_PSD,4465 4466 /* keep last */4467 __NL80211_REG_RULE_ATTR_AFTER_LAST,4468 NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 14469};4470 4471/**4472 * enum nl80211_sched_scan_match_attr - scheduled scan match attributes4473 * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved4474 * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,4475 * only report BSS with matching SSID.4476 * (This cannot be used together with BSSID.)4477 * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a4478 * BSS in scan results. Filtering is turned off if not specified. Note that4479 * if this attribute is in a match set of its own, then it is treated as4480 * the default value for all matchsets with an SSID, rather than being a4481 * matchset of its own without an RSSI filter. This is due to problems with4482 * how this API was implemented in the past. Also, due to the same problem,4483 * the only way to create a matchset with only an RSSI filter (with this4484 * attribute) is if there's only a single matchset with the RSSI attribute.4485 * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether4486 * %NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or4487 * relative to current bss's RSSI.4488 * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for4489 * BSS-es in the specified band is to be adjusted before doing4490 * RSSI-based BSS selection. The attribute value is a packed structure4491 * value as specified by &struct nl80211_bss_select_rssi_adjust.4492 * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching4493 * (this cannot be used together with SSID).4494 * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Obsolete4495 * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter4496 * attribute number currently defined4497 * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use4498 */4499enum nl80211_sched_scan_match_attr {4500 __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,4501 4502 NL80211_SCHED_SCAN_MATCH_ATTR_SSID,4503 NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,4504 NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,4505 NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,4506 NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,4507 NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, /* obsolete */4508 4509 /* keep last */4510 __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,4511 NL80211_SCHED_SCAN_MATCH_ATTR_MAX =4512 __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 14513};4514 4515/* only for backward compatibility */4516#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID4517 4518/**4519 * enum nl80211_reg_rule_flags - regulatory rule flags4520 *4521 * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed4522 * @NL80211_RRF_NO_CCK: CCK modulation not allowed4523 * @NL80211_RRF_NO_INDOOR: indoor operation not allowed4524 * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed4525 * @NL80211_RRF_DFS: DFS support is required to be used4526 * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links4527 * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links4528 * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,4529 * this includes probe requests or modes of operation that require4530 * beaconing.4531 * @__NL80211_RRF_NO_IBSS: obsolete, same as NO_IR4532 * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated4533 * base on contiguous rules and wider channels will be allowed to cross4534 * multiple contiguous/overlapping frequency ranges.4535 * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT4536 * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation4537 * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation4538 * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed4539 * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed4540 * @NL80211_RRF_NO_HE: HE operation not allowed4541 * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed4542 * @NL80211_RRF_NO_EHT: EHT operation not allowed4543 * @NL80211_RRF_PSD: Ruleset has power spectral density value4544 * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for4545 * peer-to-peer or adhoc communication under the control of a DFS master4546 * which operates on the same channel (FCC-594280 D01 Section B.3).4547 * Should be used together with %NL80211_RRF_DFS only.4548 * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed4549 * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed4550 * @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted4551 * despite NO_IR configuration.4552 */4553enum nl80211_reg_rule_flags {4554 NL80211_RRF_NO_OFDM = 1<<0,4555 NL80211_RRF_NO_CCK = 1<<1,4556 NL80211_RRF_NO_INDOOR = 1<<2,4557 NL80211_RRF_NO_OUTDOOR = 1<<3,4558 NL80211_RRF_DFS = 1<<4,4559 NL80211_RRF_PTP_ONLY = 1<<5,4560 NL80211_RRF_PTMP_ONLY = 1<<6,4561 NL80211_RRF_NO_IR = 1<<7,4562 __NL80211_RRF_NO_IBSS = 1<<8,4563 NL80211_RRF_AUTO_BW = 1<<11,4564 NL80211_RRF_IR_CONCURRENT = 1<<12,4565 NL80211_RRF_NO_HT40MINUS = 1<<13,4566 NL80211_RRF_NO_HT40PLUS = 1<<14,4567 NL80211_RRF_NO_80MHZ = 1<<15,4568 NL80211_RRF_NO_160MHZ = 1<<16,4569 NL80211_RRF_NO_HE = 1<<17,4570 NL80211_RRF_NO_320MHZ = 1<<18,4571 NL80211_RRF_NO_EHT = 1<<19,4572 NL80211_RRF_PSD = 1<<20,4573 NL80211_RRF_DFS_CONCURRENT = 1<<21,4574 NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1<<22,4575 NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1<<23,4576 NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1<<24,4577};4578 4579#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR4580#define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR4581#define NL80211_RRF_NO_IR NL80211_RRF_NO_IR4582#define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\4583 NL80211_RRF_NO_HT40PLUS)4584#define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT4585#define NL80211_RRF_NO_UHB_VLP_CLIENT NL80211_RRF_NO_6GHZ_VLP_CLIENT4586#define NL80211_RRF_NO_UHB_AFC_CLIENT NL80211_RRF_NO_6GHZ_AFC_CLIENT4587 4588/* For backport compatibility with older userspace */4589#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)4590 4591/**4592 * enum nl80211_dfs_regions - regulatory DFS regions4593 *4594 * @NL80211_DFS_UNSET: Country has no DFS master region specified4595 * @NL80211_DFS_FCC: Country follows DFS master rules from FCC4596 * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI4597 * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec4598 */4599enum nl80211_dfs_regions {4600 NL80211_DFS_UNSET = 0,4601 NL80211_DFS_FCC = 1,4602 NL80211_DFS_ETSI = 2,4603 NL80211_DFS_JP = 3,4604};4605 4606/**4607 * enum nl80211_user_reg_hint_type - type of user regulatory hint4608 *4609 * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always4610 * assumed if the attribute is not set.4611 * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular4612 * base station. Device drivers that have been tested to work4613 * properly to support this type of hint can enable these hints4614 * by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature4615 * capability on the struct wiphy. The wireless core will4616 * ignore all cell base station hints until at least one device4617 * present has been registered with the wireless core that4618 * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a4619 * supported feature.4620 * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the4621 * platform is operating in an indoor environment.4622 */4623enum nl80211_user_reg_hint_type {4624 NL80211_USER_REG_HINT_USER = 0,4625 NL80211_USER_REG_HINT_CELL_BASE = 1,4626 NL80211_USER_REG_HINT_INDOOR = 2,4627};4628 4629/**4630 * enum nl80211_survey_info - survey information4631 *4632 * These attribute types are used with %NL80211_ATTR_SURVEY_INFO4633 * when getting information about a survey.4634 *4635 * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved4636 * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel4637 * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)4638 * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used4639 * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio4640 * was turned on (on channel or globally)4641 * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary4642 * channel was sensed busy (either due to activity or energy detect)4643 * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension4644 * channel was sensed busy4645 * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent4646 * receiving data (on channel or globally)4647 * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent4648 * transmitting data (on channel or globally)4649 * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan4650 * (on this channel or globally)4651 * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment4652 * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent4653 * receiving frames destined to the local BSS4654 * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number4655 * currently defined4656 * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz4657 * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use4658 */4659enum nl80211_survey_info {4660 __NL80211_SURVEY_INFO_INVALID,4661 NL80211_SURVEY_INFO_FREQUENCY,4662 NL80211_SURVEY_INFO_NOISE,4663 NL80211_SURVEY_INFO_IN_USE,4664 NL80211_SURVEY_INFO_TIME,4665 NL80211_SURVEY_INFO_TIME_BUSY,4666 NL80211_SURVEY_INFO_TIME_EXT_BUSY,4667 NL80211_SURVEY_INFO_TIME_RX,4668 NL80211_SURVEY_INFO_TIME_TX,4669 NL80211_SURVEY_INFO_TIME_SCAN,4670 NL80211_SURVEY_INFO_PAD,4671 NL80211_SURVEY_INFO_TIME_BSS_RX,4672 NL80211_SURVEY_INFO_FREQUENCY_OFFSET,4673 4674 /* keep last */4675 __NL80211_SURVEY_INFO_AFTER_LAST,4676 NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 14677};4678 4679/* keep old names for compatibility */4680#define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME4681#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY4682#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY4683#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX4684#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX4685 4686/**4687 * enum nl80211_mntr_flags - monitor configuration flags4688 *4689 * Monitor configuration flags.4690 *4691 * @__NL80211_MNTR_FLAG_INVALID: reserved4692 *4693 * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS4694 * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP4695 * @NL80211_MNTR_FLAG_CONTROL: pass control frames4696 * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering4697 * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.4698 * overrides all other flags.4699 * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address4700 * and ACK incoming unicast packets.4701 *4702 * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use4703 * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag4704 */4705enum nl80211_mntr_flags {4706 __NL80211_MNTR_FLAG_INVALID,4707 NL80211_MNTR_FLAG_FCSFAIL,4708 NL80211_MNTR_FLAG_PLCPFAIL,4709 NL80211_MNTR_FLAG_CONTROL,4710 NL80211_MNTR_FLAG_OTHER_BSS,4711 NL80211_MNTR_FLAG_COOK_FRAMES,4712 NL80211_MNTR_FLAG_ACTIVE,4713 4714 /* keep last */4715 __NL80211_MNTR_FLAG_AFTER_LAST,4716 NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 14717};4718 4719/**4720 * enum nl80211_mesh_power_mode - mesh power save modes4721 *4722 * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is4723 * not known or has not been set yet.4724 * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is4725 * in Awake state all the time.4726 * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will4727 * alternate between Active and Doze states, but will wake up for4728 * neighbor's beacons.4729 * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will4730 * alternate between Active and Doze states, but may not wake up4731 * for neighbor's beacons.4732 *4733 * @__NL80211_MESH_POWER_AFTER_LAST: internal use4734 * @NL80211_MESH_POWER_MAX: highest possible power save level4735 */4736 4737enum nl80211_mesh_power_mode {4738 NL80211_MESH_POWER_UNKNOWN,4739 NL80211_MESH_POWER_ACTIVE,4740 NL80211_MESH_POWER_LIGHT_SLEEP,4741 NL80211_MESH_POWER_DEEP_SLEEP,4742 4743 __NL80211_MESH_POWER_AFTER_LAST,4744 NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 14745};4746 4747/**4748 * enum nl80211_meshconf_params - mesh configuration parameters4749 *4750 * Mesh configuration parameters. These can be changed while the mesh is4751 * active.4752 *4753 * @__NL80211_MESHCONF_INVALID: internal use4754 *4755 * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in4756 * millisecond units, used by the Peer Link Open message4757 *4758 * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in4759 * millisecond units, used by the peer link management to close a peer link4760 *4761 * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in4762 * millisecond units4763 *4764 * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed4765 * on this mesh interface4766 *4767 * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link4768 * open retries that can be sent to establish a new peer link instance in a4769 * mesh4770 *4771 * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh4772 * point.4773 *4774 * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open4775 * peer links when we detect compatible mesh peers. Disabled if4776 * @NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are4777 * set.4778 *4779 * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames4780 * containing a PREQ that an MP can send to a particular destination (path4781 * target)4782 *4783 * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths4784 * (in milliseconds)4785 *4786 * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait4787 * until giving up on a path discovery (in milliseconds)4788 *4789 * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh4790 * points receiving a PREQ shall consider the forwarding information from4791 * the root to be valid. (TU = time unit)4792 *4793 * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in4794 * TUs) during which an MP can send only one action frame containing a PREQ4795 * reference element4796 *4797 * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)4798 * that it takes for an HWMP information element to propagate across the4799 * mesh4800 *4801 * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not4802 *4803 * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a4804 * source mesh point for path selection elements.4805 *4806 * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between4807 * root announcements are transmitted.4808 *4809 * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has4810 * access to a broader network beyond the MBSS. This is done via Root4811 * Announcement frames.4812 *4813 * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in4814 * TUs) during which a mesh STA can send only one Action frame containing a4815 * PERR element.4816 *4817 * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding4818 * or forwarding entity (default is TRUE - forwarding entity)4819 *4820 * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the4821 * threshold for average signal strength of candidate station to establish4822 * a peer link.4823 *4824 * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors4825 * to synchronize to for 11s default synchronization method4826 * (see 11C.12.2.2)4827 *4828 * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode.4829 *4830 * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute4831 *4832 * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for4833 * which mesh STAs receiving a proactive PREQ shall consider the forwarding4834 * information to the root mesh STA to be valid.4835 *4836 * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between4837 * proactive PREQs are transmitted.4838 *4839 * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time4840 * (in TUs) during which a mesh STA can send only one Action frame4841 * containing a PREQ element for root path confirmation.4842 *4843 * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links.4844 * type &enum nl80211_mesh_power_mode (u32)4845 *4846 * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)4847 *4848 * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've4849 * established peering with for longer than this time (in seconds), then4850 * remove it from the STA's list of peers. You may set this to 0 to disable4851 * the removal of the STA. Default is 30 minutes.4852 *4853 * @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA4854 * will advertise that it is connected to a gate in the mesh formation4855 * field. If left unset then the mesh formation field will only4856 * advertise such if there is an active root mesh path.4857 *4858 * @NL80211_MESHCONF_NOLEARN: Try to avoid multi-hop path discovery (e.g.4859 * PREQ/PREP for HWMP) if the destination is a direct neighbor. Note that4860 * this might not be the optimal decision as a multi-hop route might be4861 * better. So if using this setting you will likely also want to disable4862 * dot11MeshForwarding and use another mesh routing protocol on top.4863 *4864 * @NL80211_MESHCONF_CONNECTED_TO_AS: If set to true then this mesh STA4865 * will advertise that it is connected to a authentication server4866 * in the mesh formation field.4867 *4868 * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use4869 */4870enum nl80211_meshconf_params {4871 __NL80211_MESHCONF_INVALID,4872 NL80211_MESHCONF_RETRY_TIMEOUT,4873 NL80211_MESHCONF_CONFIRM_TIMEOUT,4874 NL80211_MESHCONF_HOLDING_TIMEOUT,4875 NL80211_MESHCONF_MAX_PEER_LINKS,4876 NL80211_MESHCONF_MAX_RETRIES,4877 NL80211_MESHCONF_TTL,4878 NL80211_MESHCONF_AUTO_OPEN_PLINKS,4879 NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,4880 NL80211_MESHCONF_PATH_REFRESH_TIME,4881 NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,4882 NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,4883 NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,4884 NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,4885 NL80211_MESHCONF_HWMP_ROOTMODE,4886 NL80211_MESHCONF_ELEMENT_TTL,4887 NL80211_MESHCONF_HWMP_RANN_INTERVAL,4888 NL80211_MESHCONF_GATE_ANNOUNCEMENTS,4889 NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,4890 NL80211_MESHCONF_FORWARDING,4891 NL80211_MESHCONF_RSSI_THRESHOLD,4892 NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,4893 NL80211_MESHCONF_HT_OPMODE,4894 NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,4895 NL80211_MESHCONF_HWMP_ROOT_INTERVAL,4896 NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,4897 NL80211_MESHCONF_POWER_MODE,4898 NL80211_MESHCONF_AWAKE_WINDOW,4899 NL80211_MESHCONF_PLINK_TIMEOUT,4900 NL80211_MESHCONF_CONNECTED_TO_GATE,4901 NL80211_MESHCONF_NOLEARN,4902 NL80211_MESHCONF_CONNECTED_TO_AS,4903 4904 /* keep last */4905 __NL80211_MESHCONF_ATTR_AFTER_LAST,4906 NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 14907};4908 4909/**4910 * enum nl80211_mesh_setup_params - mesh setup parameters4911 *4912 * Mesh setup parameters. These are used to start/join a mesh and cannot be4913 * changed while the mesh is active.4914 *4915 * @__NL80211_MESH_SETUP_INVALID: Internal use4916 *4917 * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a4918 * vendor specific path selection algorithm or disable it to use the4919 * default HWMP.4920 *4921 * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a4922 * vendor specific path metric or disable it to use the default Airtime4923 * metric.4924 *4925 * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a4926 * robust security network ie, or a vendor specific information element4927 * that vendors will use to identify the path selection methods and4928 * metrics in use.4929 *4930 * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication4931 * daemon will be authenticating mesh candidates.4932 *4933 * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication4934 * daemon will be securing peer link frames. AMPE is a secured version of4935 * Mesh Peering Management (MPM) and is implemented with the assistance of4936 * a userspace daemon. When this flag is set, the kernel will send peer4937 * management frames to a userspace daemon that will implement AMPE4938 * functionality (security capabilities selection, key confirmation, and4939 * key management). When the flag is unset (default), the kernel can4940 * autonomously complete (unsecured) mesh peering without the need of a4941 * userspace daemon.4942 *4943 * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a4944 * vendor specific synchronization method or disable it to use the default4945 * neighbor offset synchronization4946 *4947 * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will4948 * implement an MPM which handles peer allocation and state.4949 *4950 * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication4951 * method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE).4952 * Default is no authentication method required.4953 *4954 * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number4955 *4956 * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use4957 */4958enum nl80211_mesh_setup_params {4959 __NL80211_MESH_SETUP_INVALID,4960 NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,4961 NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,4962 NL80211_MESH_SETUP_IE,4963 NL80211_MESH_SETUP_USERSPACE_AUTH,4964 NL80211_MESH_SETUP_USERSPACE_AMPE,4965 NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,4966 NL80211_MESH_SETUP_USERSPACE_MPM,4967 NL80211_MESH_SETUP_AUTH_PROTOCOL,4968 4969 /* keep last */4970 __NL80211_MESH_SETUP_ATTR_AFTER_LAST,4971 NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 14972};4973 4974/**4975 * enum nl80211_txq_attr - TX queue parameter attributes4976 * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved4977 * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*)4978 * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning4979 * disabled4980 * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form4981 * 2^n-1 in the range 1..32767]4982 * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form4983 * 2^n-1 in the range 1..32767]4984 * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]4985 * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal4986 * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number4987 */4988enum nl80211_txq_attr {4989 __NL80211_TXQ_ATTR_INVALID,4990 NL80211_TXQ_ATTR_AC,4991 NL80211_TXQ_ATTR_TXOP,4992 NL80211_TXQ_ATTR_CWMIN,4993 NL80211_TXQ_ATTR_CWMAX,4994 NL80211_TXQ_ATTR_AIFS,4995 4996 /* keep last */4997 __NL80211_TXQ_ATTR_AFTER_LAST,4998 NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 14999};5000 5001enum nl80211_ac {5002 NL80211_AC_VO,5003 NL80211_AC_VI,5004 NL80211_AC_BE,5005 NL80211_AC_BK,5006 NL80211_NUM_ACS5007};5008 5009/* backward compat */5010#define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC5011#define NL80211_TXQ_Q_VO NL80211_AC_VO5012#define NL80211_TXQ_Q_VI NL80211_AC_VI5013#define NL80211_TXQ_Q_BE NL80211_AC_BE5014#define NL80211_TXQ_Q_BK NL80211_AC_BK5015 5016/**5017 * enum nl80211_channel_type - channel type5018 * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel5019 * @NL80211_CHAN_HT20: 20 MHz HT channel5020 * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel5021 * below the control channel5022 * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel5023 * above the control channel5024 */5025enum nl80211_channel_type {5026 NL80211_CHAN_NO_HT,5027 NL80211_CHAN_HT20,5028 NL80211_CHAN_HT40MINUS,5029 NL80211_CHAN_HT40PLUS5030};5031 5032/**5033 * enum nl80211_key_mode - Key mode5034 *5035 * @NL80211_KEY_RX_TX: (Default)5036 * Key can be used for Rx and Tx immediately5037 *5038 * The following modes can only be selected for unicast keys and when the5039 * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID:5040 *5041 * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY:5042 * Unicast key can only be used for Rx, Tx not allowed, yet5043 * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY:5044 * The unicast key identified by idx and mac is cleared for Tx and becomes5045 * the preferred Tx key for the station.5046 */5047enum nl80211_key_mode {5048 NL80211_KEY_RX_TX,5049 NL80211_KEY_NO_TX,5050 NL80211_KEY_SET_TX5051};5052 5053/**5054 * enum nl80211_chan_width - channel width definitions5055 *5056 * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH5057 * attribute.5058 *5059 * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel5060 * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel5061 * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ15062 * attribute must be provided as well5063 * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ15064 * attribute must be provided as well5065 * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ15066 * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well5067 * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ15068 * attribute must be provided as well5069 * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel5070 * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel5071 * @NL80211_CHAN_WIDTH_1: 1 MHz OFDM channel5072 * @NL80211_CHAN_WIDTH_2: 2 MHz OFDM channel5073 * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel5074 * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel5075 * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel5076 * @NL80211_CHAN_WIDTH_320: 320 MHz channel, the %NL80211_ATTR_CENTER_FREQ15077 * attribute must be provided as well5078 */5079enum nl80211_chan_width {5080 NL80211_CHAN_WIDTH_20_NOHT,5081 NL80211_CHAN_WIDTH_20,5082 NL80211_CHAN_WIDTH_40,5083 NL80211_CHAN_WIDTH_80,5084 NL80211_CHAN_WIDTH_80P80,5085 NL80211_CHAN_WIDTH_160,5086 NL80211_CHAN_WIDTH_5,5087 NL80211_CHAN_WIDTH_10,5088 NL80211_CHAN_WIDTH_1,5089 NL80211_CHAN_WIDTH_2,5090 NL80211_CHAN_WIDTH_4,5091 NL80211_CHAN_WIDTH_8,5092 NL80211_CHAN_WIDTH_16,5093 NL80211_CHAN_WIDTH_320,5094};5095 5096/**5097 * enum nl80211_bss_scan_width - control channel width for a BSS5098 *5099 * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute.5100 *5101 * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible5102 * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide5103 * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide5104 * @NL80211_BSS_CHAN_WIDTH_1: control channel is 1 MHz wide5105 * @NL80211_BSS_CHAN_WIDTH_2: control channel is 2 MHz wide5106 */5107enum nl80211_bss_scan_width {5108 NL80211_BSS_CHAN_WIDTH_20,5109 NL80211_BSS_CHAN_WIDTH_10,5110 NL80211_BSS_CHAN_WIDTH_5,5111 NL80211_BSS_CHAN_WIDTH_1,5112 NL80211_BSS_CHAN_WIDTH_2,5113};5114 5115/**5116 * enum nl80211_bss_use_for - bitmap indicating possible BSS use5117 * @NL80211_BSS_USE_FOR_NORMAL: Use this BSS for normal "connection",5118 * including IBSS/MBSS depending on the type.5119 * @NL80211_BSS_USE_FOR_MLD_LINK: This BSS can be used as a link in an5120 * MLO connection. Note that for an MLO connection, all links including5121 * the assoc link must have this flag set, and the assoc link must5122 * additionally have %NL80211_BSS_USE_FOR_NORMAL set.5123 */5124enum nl80211_bss_use_for {5125 NL80211_BSS_USE_FOR_NORMAL = 1 << 0,5126 NL80211_BSS_USE_FOR_MLD_LINK = 1 << 1,5127};5128 5129/**5130 * enum nl80211_bss_cannot_use_reasons - reason(s) connection to a5131 * BSS isn't possible5132 * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't5133 * supported by the device, and this BSS entry represents one.5134 * @NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH: STA is not supporting5135 * the AP power type (SP, VLP, AP) that the AP uses.5136 */5137enum nl80211_bss_cannot_use_reasons {5138 NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY = 1 << 0,5139 NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH = 1 << 1,5140};5141 5142#define NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH \5143 NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH5144 5145/**5146 * enum nl80211_bss - netlink attributes for a BSS5147 *5148 * @__NL80211_BSS_INVALID: invalid5149 * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)5150 * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)5151 * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)5152 * (if @NL80211_BSS_PRESP_DATA is present then this is known to be5153 * from a probe response, otherwise it may be from the same beacon5154 * that the NL80211_BSS_BEACON_TSF will be from)5155 * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)5156 * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)5157 * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the5158 * raw information elements from the probe response/beacon (bin);5159 * if the %NL80211_BSS_BEACON_IES attribute is present and the data is5160 * different then the IEs here are from a Probe Response frame; otherwise5161 * they are from a Beacon frame.5162 * However, if the driver does not indicate the source of the IEs, these5163 * IEs may be from either frame subtype.5164 * If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the5165 * data here is known to be from a probe response, without any heuristics.5166 * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon5167 * in mBm (100 * dBm) (s32)5168 * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon5169 * in unspecified units, scaled to 0..100 (u8)5170 * @NL80211_BSS_STATUS: status, if this BSS is "used"5171 * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms5172 * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information5173 * elements from a Beacon frame (bin); not present if no Beacon frame has5174 * yet been received5175 * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel5176 * (u32, enum nl80211_bss_scan_width) - No longer used!5177 * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64)5178 * (not present if no beacon frame has been received yet)5179 * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and5180 * @NL80211_BSS_TSF is known to be from a probe response (flag attribute)5181 * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry5182 * was last updated by a received frame. The value is expected to be5183 * accurate to about 10ms. (u64, nanoseconds)5184 * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment5185 * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first5186 * octet of the timestamp field of the last beacon/probe received for5187 * this BSS. The time is the TSF of the BSS specified by5188 * @NL80211_BSS_PARENT_BSSID. (u64).5189 * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF5190 * is set.5191 * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.5192 * Contains a nested array of signal strength attributes (u8, dBm),5193 * using the nesting index as the antenna number.5194 * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz5195 * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8).5196 * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it.5197 * @NL80211_BSS_USE_FOR: u32 bitmap attribute indicating what the BSS can be5198 * used for, see &enum nl80211_bss_use_for.5199 * @NL80211_BSS_CANNOT_USE_REASONS: Indicates the reason that this BSS cannot5200 * be used for all or some of the possible uses by the device reporting it,5201 * even though its presence was detected.5202 * This is a u64 attribute containing a bitmap of values from5203 * &enum nl80211_cannot_use_reasons, note that the attribute may be missing5204 * if no reasons are specified.5205 * @__NL80211_BSS_AFTER_LAST: internal5206 * @NL80211_BSS_MAX: highest BSS attribute5207 */5208enum nl80211_bss {5209 __NL80211_BSS_INVALID,5210 NL80211_BSS_BSSID,5211 NL80211_BSS_FREQUENCY,5212 NL80211_BSS_TSF,5213 NL80211_BSS_BEACON_INTERVAL,5214 NL80211_BSS_CAPABILITY,5215 NL80211_BSS_INFORMATION_ELEMENTS,5216 NL80211_BSS_SIGNAL_MBM,5217 NL80211_BSS_SIGNAL_UNSPEC,5218 NL80211_BSS_STATUS,5219 NL80211_BSS_SEEN_MS_AGO,5220 NL80211_BSS_BEACON_IES,5221 NL80211_BSS_CHAN_WIDTH,5222 NL80211_BSS_BEACON_TSF,5223 NL80211_BSS_PRESP_DATA,5224 NL80211_BSS_LAST_SEEN_BOOTTIME,5225 NL80211_BSS_PAD,5226 NL80211_BSS_PARENT_TSF,5227 NL80211_BSS_PARENT_BSSID,5228 NL80211_BSS_CHAIN_SIGNAL,5229 NL80211_BSS_FREQUENCY_OFFSET,5230 NL80211_BSS_MLO_LINK_ID,5231 NL80211_BSS_MLD_ADDR,5232 NL80211_BSS_USE_FOR,5233 NL80211_BSS_CANNOT_USE_REASONS,5234 5235 /* keep last */5236 __NL80211_BSS_AFTER_LAST,5237 NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 15238};5239 5240/**5241 * enum nl80211_bss_status - BSS "status"5242 * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.5243 * Note that this is no longer used since cfg80211 no longer5244 * keeps track of whether or not authentication was done with5245 * a given BSS.5246 * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.5247 * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.5248 *5249 * The BSS status is a BSS attribute in scan dumps, which5250 * indicates the status the interface has wrt. this BSS.5251 */5252enum nl80211_bss_status {5253 NL80211_BSS_STATUS_AUTHENTICATED,5254 NL80211_BSS_STATUS_ASSOCIATED,5255 NL80211_BSS_STATUS_IBSS_JOINED,5256};5257 5258/**5259 * enum nl80211_auth_type - AuthenticationType5260 *5261 * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication5262 * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)5263 * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)5264 * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)5265 * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals5266 * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key5267 * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS5268 * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key5269 * @__NL80211_AUTHTYPE_NUM: internal5270 * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm5271 * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by5272 * trying multiple times); this is invalid in netlink -- leave out5273 * the attribute for this on CONNECT commands.5274 */5275enum nl80211_auth_type {5276 NL80211_AUTHTYPE_OPEN_SYSTEM,5277 NL80211_AUTHTYPE_SHARED_KEY,5278 NL80211_AUTHTYPE_FT,5279 NL80211_AUTHTYPE_NETWORK_EAP,5280 NL80211_AUTHTYPE_SAE,5281 NL80211_AUTHTYPE_FILS_SK,5282 NL80211_AUTHTYPE_FILS_SK_PFS,5283 NL80211_AUTHTYPE_FILS_PK,5284 5285 /* keep last */5286 __NL80211_AUTHTYPE_NUM,5287 NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,5288 NL80211_AUTHTYPE_AUTOMATIC5289};5290 5291/**5292 * enum nl80211_key_type - Key Type5293 * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key5294 * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key5295 * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)5296 * @NUM_NL80211_KEYTYPES: number of defined key types5297 */5298enum nl80211_key_type {5299 NL80211_KEYTYPE_GROUP,5300 NL80211_KEYTYPE_PAIRWISE,5301 NL80211_KEYTYPE_PEERKEY,5302 5303 NUM_NL80211_KEYTYPES5304};5305 5306/**5307 * enum nl80211_mfp - Management frame protection state5308 * @NL80211_MFP_NO: Management frame protection not used5309 * @NL80211_MFP_REQUIRED: Management frame protection required5310 * @NL80211_MFP_OPTIONAL: Management frame protection is optional5311 */5312enum nl80211_mfp {5313 NL80211_MFP_NO,5314 NL80211_MFP_REQUIRED,5315 NL80211_MFP_OPTIONAL,5316};5317 5318enum nl80211_wpa_versions {5319 NL80211_WPA_VERSION_1 = 1 << 0,5320 NL80211_WPA_VERSION_2 = 1 << 1,5321 NL80211_WPA_VERSION_3 = 1 << 2,5322};5323 5324/**5325 * enum nl80211_key_default_types - key default types5326 * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid5327 * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default5328 * unicast key5329 * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default5330 * multicast key5331 * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types5332 */5333enum nl80211_key_default_types {5334 __NL80211_KEY_DEFAULT_TYPE_INVALID,5335 NL80211_KEY_DEFAULT_TYPE_UNICAST,5336 NL80211_KEY_DEFAULT_TYPE_MULTICAST,5337 5338 NUM_NL80211_KEY_DEFAULT_TYPES5339};5340 5341/**5342 * enum nl80211_key_attributes - key attributes5343 * @__NL80211_KEY_INVALID: invalid5344 * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of5345 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC5346 * keys5347 * @NL80211_KEY_IDX: key ID (u8, 0-3)5348 * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.115349 * section 7.3.2.25.1, e.g. 0x000FAC04)5350 * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and5351 * CCMP keys, each six bytes in little endian5352 * @NL80211_KEY_DEFAULT: flag indicating default key5353 * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key5354 * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not5355 * specified the default depends on whether a MAC address was5356 * given with the command using the key or not (u32)5357 * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags5358 * attributes, specifying what a key should be set as default as.5359 * See &enum nl80211_key_default_types.5360 * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode.5361 * Defaults to @NL80211_KEY_RX_TX.5362 * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key5363 *5364 * @__NL80211_KEY_AFTER_LAST: internal5365 * @NL80211_KEY_MAX: highest key attribute5366 */5367enum nl80211_key_attributes {5368 __NL80211_KEY_INVALID,5369 NL80211_KEY_DATA,5370 NL80211_KEY_IDX,5371 NL80211_KEY_CIPHER,5372 NL80211_KEY_SEQ,5373 NL80211_KEY_DEFAULT,5374 NL80211_KEY_DEFAULT_MGMT,5375 NL80211_KEY_TYPE,5376 NL80211_KEY_DEFAULT_TYPES,5377 NL80211_KEY_MODE,5378 NL80211_KEY_DEFAULT_BEACON,5379 5380 /* keep last */5381 __NL80211_KEY_AFTER_LAST,5382 NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 15383};5384 5385/**5386 * enum nl80211_tx_rate_attributes - TX rate set attributes5387 * @__NL80211_TXRATE_INVALID: invalid5388 * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection5389 * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with5390 * 1 = 500 kbps) but without the IE length restriction (at most5391 * %NL80211_MAX_SUPP_RATES in a single array).5392 * @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection5393 * in an array of MCS numbers.5394 * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,5395 * see &struct nl80211_txrate_vht5396 * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi5397 * @NL80211_TXRATE_HE: HE rates allowed for TX rate selection,5398 * see &struct nl80211_txrate_he5399 * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us.5400 * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF.5401 * @__NL80211_TXRATE_AFTER_LAST: internal5402 * @NL80211_TXRATE_MAX: highest TX rate attribute5403 */5404enum nl80211_tx_rate_attributes {5405 __NL80211_TXRATE_INVALID,5406 NL80211_TXRATE_LEGACY,5407 NL80211_TXRATE_HT,5408 NL80211_TXRATE_VHT,5409 NL80211_TXRATE_GI,5410 NL80211_TXRATE_HE,5411 NL80211_TXRATE_HE_GI,5412 NL80211_TXRATE_HE_LTF,5413 5414 /* keep last */5415 __NL80211_TXRATE_AFTER_LAST,5416 NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 15417};5418 5419#define NL80211_TXRATE_MCS NL80211_TXRATE_HT5420#define NL80211_VHT_NSS_MAX 85421 5422/**5423 * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap5424 * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.)5425 */5426struct nl80211_txrate_vht {5427 __u16 mcs[NL80211_VHT_NSS_MAX];5428};5429 5430#define NL80211_HE_NSS_MAX 85431/**5432 * struct nl80211_txrate_he - HE MCS/NSS txrate bitmap5433 * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.)5434 */5435struct nl80211_txrate_he {5436 __u16 mcs[NL80211_HE_NSS_MAX];5437};5438 5439enum nl80211_txrate_gi {5440 NL80211_TXRATE_DEFAULT_GI,5441 NL80211_TXRATE_FORCE_SGI,5442 NL80211_TXRATE_FORCE_LGI,5443};5444 5445/**5446 * enum nl80211_band - Frequency band5447 * @NL80211_BAND_2GHZ: 2.4 GHz ISM band5448 * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)5449 * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)5450 * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)5451 * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs5452 * @NL80211_BAND_LC: light communication band (placeholder)5453 * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace5454 * since newer kernel versions may support more bands5455 */5456enum nl80211_band {5457 NL80211_BAND_2GHZ,5458 NL80211_BAND_5GHZ,5459 NL80211_BAND_60GHZ,5460 NL80211_BAND_6GHZ,5461 NL80211_BAND_S1GHZ,5462 NL80211_BAND_LC,5463 5464 NUM_NL80211_BANDS,5465};5466 5467/**5468 * enum nl80211_ps_state - powersave state5469 * @NL80211_PS_DISABLED: powersave is disabled5470 * @NL80211_PS_ENABLED: powersave is enabled5471 */5472enum nl80211_ps_state {5473 NL80211_PS_DISABLED,5474 NL80211_PS_ENABLED,5475};5476 5477/**5478 * enum nl80211_attr_cqm - connection quality monitor attributes5479 * @__NL80211_ATTR_CQM_INVALID: invalid5480 * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies5481 * the threshold for the RSSI level at which an event will be sent. Zero5482 * to disable. Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is5483 * set, multiple values can be supplied as a low-to-high sorted array of5484 * threshold values in dBm. Events will be sent when the RSSI value5485 * crosses any of the thresholds.5486 * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies5487 * the minimum amount the RSSI level must change after an event before a5488 * new event may be issued (to reduce effects of RSSI oscillation).5489 * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event5490 * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many5491 * consecutive packets were not acknowledged by the peer5492 * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures5493 * during the given %NL80211_ATTR_CQM_TXE_INTVL before an5494 * %NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and5495 * %NL80211_ATTR_CQM_TXE_PKTS is generated.5496 * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given5497 * %NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is5498 * checked.5499 * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic5500 * interval in which %NL80211_ATTR_CQM_TXE_PKTS and5501 * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an5502 * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.5503 * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon5504 * loss event5505 * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the5506 * RSSI threshold event.5507 * @__NL80211_ATTR_CQM_AFTER_LAST: internal5508 * @NL80211_ATTR_CQM_MAX: highest key attribute5509 */5510enum nl80211_attr_cqm {5511 __NL80211_ATTR_CQM_INVALID,5512 NL80211_ATTR_CQM_RSSI_THOLD,5513 NL80211_ATTR_CQM_RSSI_HYST,5514 NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,5515 NL80211_ATTR_CQM_PKT_LOSS_EVENT,5516 NL80211_ATTR_CQM_TXE_RATE,5517 NL80211_ATTR_CQM_TXE_PKTS,5518 NL80211_ATTR_CQM_TXE_INTVL,5519 NL80211_ATTR_CQM_BEACON_LOSS_EVENT,5520 NL80211_ATTR_CQM_RSSI_LEVEL,5521 5522 /* keep last */5523 __NL80211_ATTR_CQM_AFTER_LAST,5524 NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 15525};5526 5527/**5528 * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event5529 * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the5530 * configured threshold5531 * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the5532 * configured threshold5533 * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent)5534 */5535enum nl80211_cqm_rssi_threshold_event {5536 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,5537 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,5538 NL80211_CQM_RSSI_BEACON_LOSS_EVENT,5539};5540 5541 5542/**5543 * enum nl80211_tx_power_setting - TX power adjustment5544 * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power5545 * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter5546 * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter5547 */5548enum nl80211_tx_power_setting {5549 NL80211_TX_POWER_AUTOMATIC,5550 NL80211_TX_POWER_LIMITED,5551 NL80211_TX_POWER_FIXED,5552};5553 5554/**5555 * enum nl80211_tid_config - TID config state5556 * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID5557 * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID5558 */5559enum nl80211_tid_config {5560 NL80211_TID_CONFIG_ENABLE,5561 NL80211_TID_CONFIG_DISABLE,5562};5563 5564/* enum nl80211_tx_rate_setting - TX rate configuration type5565 * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate5566 * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter5567 * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter5568 */5569enum nl80211_tx_rate_setting {5570 NL80211_TX_RATE_AUTOMATIC,5571 NL80211_TX_RATE_LIMITED,5572 NL80211_TX_RATE_FIXED,5573};5574 5575/* enum nl80211_tid_config_attr - TID specific configuration.5576 * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values5577 * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported5578 * for per-vif configuration; doesn't list the ones that are generic5579 * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).5580 * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but5581 * per peer instead.5582 * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribute, if set indicates5583 * that the new configuration overrides all previous peer5584 * configurations, otherwise previous peer specific configurations5585 * should be left untouched.5586 * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7)5587 * Its type is u16.5588 * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID.5589 * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config.5590 * Its type is u8.5591 * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame5592 * transmission, user-space sets this configuration in5593 * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and5594 * the max value is advertised by the driver in this attribute on5595 * output in wiphy capabilities.5596 * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame5597 * transmission, user-space sets this configuration in5598 * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and5599 * the max value is advertised by the driver in this attribute on5600 * output in wiphy capabilities.5601 * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation5602 * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.5603 * Its type is u8, using the values from &nl80211_tid_config.5604 * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs5605 * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using5606 * the values from &nl80211_tid_config.5607 * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation5608 * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.5609 * Its type is u8, using the values from &nl80211_tid_config.5610 * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful5611 * to notfiy the driver that what type of txrate should be used5612 * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using5613 * the values form &nl80211_tx_rate_setting.5614 * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied5615 * with the parameters passed through %NL80211_ATTR_TX_RATES.5616 * configuration is applied to the data frame for the tid to that connected5617 * station.5618 */5619enum nl80211_tid_config_attr {5620 __NL80211_TID_CONFIG_ATTR_INVALID,5621 NL80211_TID_CONFIG_ATTR_PAD,5622 NL80211_TID_CONFIG_ATTR_VIF_SUPP,5623 NL80211_TID_CONFIG_ATTR_PEER_SUPP,5624 NL80211_TID_CONFIG_ATTR_OVERRIDE,5625 NL80211_TID_CONFIG_ATTR_TIDS,5626 NL80211_TID_CONFIG_ATTR_NOACK,5627 NL80211_TID_CONFIG_ATTR_RETRY_SHORT,5628 NL80211_TID_CONFIG_ATTR_RETRY_LONG,5629 NL80211_TID_CONFIG_ATTR_AMPDU_CTRL,5630 NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL,5631 NL80211_TID_CONFIG_ATTR_AMSDU_CTRL,5632 NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE,5633 NL80211_TID_CONFIG_ATTR_TX_RATE,5634 5635 /* keep last */5636 __NL80211_TID_CONFIG_ATTR_AFTER_LAST,5637 NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 15638};5639 5640/**5641 * enum nl80211_packet_pattern_attr - packet pattern attribute5642 * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute5643 * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has5644 * a zero bit are ignored5645 * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have5646 * a bit for each byte in the pattern. The lowest-order bit corresponds5647 * to the first byte of the pattern, but the bytes of the pattern are5648 * in a little-endian-like format, i.e. the 9th byte of the pattern5649 * corresponds to the lowest-order bit in the second byte of the mask.5650 * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where5651 * xx indicates "don't care") would be represented by a pattern of5652 * twelve zero bytes, and a mask of "0xed,0x01".5653 * Note that the pattern matching is done as though frames were not5654 * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked5655 * first (including SNAP header unpacking) and then matched.5656 * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after5657 * these fixed number of bytes of received packet5658 * @NUM_NL80211_PKTPAT: number of attributes5659 * @MAX_NL80211_PKTPAT: max attribute number5660 */5661enum nl80211_packet_pattern_attr {5662 __NL80211_PKTPAT_INVALID,5663 NL80211_PKTPAT_MASK,5664 NL80211_PKTPAT_PATTERN,5665 NL80211_PKTPAT_OFFSET,5666 5667 NUM_NL80211_PKTPAT,5668 MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1,5669};5670 5671/**5672 * struct nl80211_pattern_support - packet pattern support information5673 * @max_patterns: maximum number of patterns supported5674 * @min_pattern_len: minimum length of each pattern5675 * @max_pattern_len: maximum length of each pattern5676 * @max_pkt_offset: maximum Rx packet offset5677 *5678 * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when5679 * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in5680 * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of5681 * %NL80211_ATTR_COALESCE_RULE in the capability information given5682 * by the kernel to userspace.5683 */5684struct nl80211_pattern_support {5685 __u32 max_patterns;5686 __u32 min_pattern_len;5687 __u32 max_pattern_len;5688 __u32 max_pkt_offset;5689} __attribute__((packed));5690 5691/* only for backward compatibility */5692#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID5693#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK5694#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN5695#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET5696#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT5697#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT5698#define nl80211_wowlan_pattern_support nl80211_pattern_support5699 5700/**5701 * enum nl80211_wowlan_triggers - WoWLAN trigger definitions5702 * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes5703 * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put5704 * the chip into a special state -- works best with chips that have5705 * support for low-power operation already (flag)5706 * Note that this mode is incompatible with all of the others, if5707 * any others are even supported by the device.5708 * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect5709 * is detected is implementation-specific (flag)5710 * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed5711 * by 16 repetitions of MAC addr, anywhere in payload) (flag)5712 * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns5713 * which are passed in an array of nested attributes, each nested attribute5714 * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.5715 * Each pattern defines a wakeup packet. Packet offset is associated with5716 * each pattern which is used while matching the pattern. The matching is5717 * done on the MSDU, i.e. as though the packet was an 802.3 packet, so the5718 * pattern matching is done after the packet is converted to the MSDU.5719 *5720 * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute5721 * carrying a &struct nl80211_pattern_support.5722 *5723 * When reporting wakeup. it is a u32 attribute containing the 0-based5724 * index of the pattern that caused the wakeup, in the patterns passed5725 * to the kernel when configuring.5726 * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be5727 * used when setting, used only to indicate that GTK rekeying is supported5728 * by the device (flag)5729 * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if5730 * done by the device) (flag)5731 * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request5732 * packet (flag)5733 * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)5734 * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released5735 * (on devices that have rfkill in the device) (flag)5736 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains5737 * the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame5738 * may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN5739 * attribute contains the original length.5740 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.115741 * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_802115742 * attribute if the packet was truncated somewhere.5743 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the5744 * 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may5745 * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute5746 * contains the original length.5747 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.35748 * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80235749 * attribute if the packet was truncated somewhere.5750 * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section5751 * "TCP connection wakeup" for more details. This is a nested attribute5752 * containing the exact information for establishing and keeping alive5753 * the TCP connection.5754 * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH: For wakeup reporting only, the5755 * wakeup packet was received on the TCP connection5756 * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the5757 * TCP connection was lost or failed to be established5758 * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only,5759 * the TCP connection ran out of tokens to use for data to send to the5760 * service5761 * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network5762 * is detected. This is a nested attribute that contains the5763 * same attributes used with @NL80211_CMD_START_SCHED_SCAN. It5764 * specifies how the scan is performed (e.g. the interval, the5765 * channels to scan and the initial delay) as well as the scan5766 * results that will trigger a wake (i.e. the matchsets). This5767 * attribute is also sent in a response to5768 * @NL80211_CMD_GET_WIPHY, indicating the number of match sets5769 * supported by the driver (u32).5770 * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute5771 * containing an array with information about what triggered the5772 * wake up. If no elements are present in the array, it means5773 * that the information is not available. If more than one5774 * element is present, it means that more than one match5775 * occurred.5776 * Each element in the array is a nested attribute that contains5777 * one optional %NL80211_ATTR_SSID attribute and one optional5778 * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of5779 * these attributes must be present. If5780 * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one5781 * frequency, it means that the match occurred in more than one5782 * channel.5783 * @NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC: For wakeup reporting only.5784 * Wake up happened due to unprotected deauth or disassoc frame in MFP.5785 * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers5786 * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number5787 *5788 * These nested attributes are used to configure the wakeup triggers and5789 * to report the wakeup reason(s).5790 */5791enum nl80211_wowlan_triggers {5792 __NL80211_WOWLAN_TRIG_INVALID,5793 NL80211_WOWLAN_TRIG_ANY,5794 NL80211_WOWLAN_TRIG_DISCONNECT,5795 NL80211_WOWLAN_TRIG_MAGIC_PKT,5796 NL80211_WOWLAN_TRIG_PKT_PATTERN,5797 NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,5798 NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,5799 NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,5800 NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,5801 NL80211_WOWLAN_TRIG_RFKILL_RELEASE,5802 NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211,5803 NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN,5804 NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023,5805 NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN,5806 NL80211_WOWLAN_TRIG_TCP_CONNECTION,5807 NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH,5808 NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST,5809 NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,5810 NL80211_WOWLAN_TRIG_NET_DETECT,5811 NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,5812 NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC,5813 5814 /* keep last */5815 NUM_NL80211_WOWLAN_TRIG,5816 MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 15817};5818 5819/**5820 * DOC: TCP connection wakeup5821 *5822 * Some devices can establish a TCP connection in order to be woken up by a5823 * packet coming in from outside their network segment, or behind NAT. If5824 * configured, the device will establish a TCP connection to the given5825 * service, and periodically send data to that service. The first data5826 * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK.5827 * The data packets can optionally include a (little endian) sequence5828 * number (in the TCP payload!) that is generated by the device, and, also5829 * optionally, a token from a list of tokens. This serves as a keep-alive5830 * with the service, and for NATed connections, etc.5831 *5832 * During this keep-alive period, the server doesn't send any data to the5833 * client. When receiving data, it is compared against the wakeup pattern5834 * (and mask) and if it matches, the host is woken up. Similarly, if the5835 * connection breaks or cannot be established to start with, the host is5836 * also woken up.5837 *5838 * Developer's note: ARP offload is required for this, otherwise TCP5839 * response packets might not go through correctly.5840 */5841 5842/**5843 * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence5844 * @start: starting value5845 * @offset: offset of sequence number in packet5846 * @len: length of the sequence value to write, 1 through 45847 *5848 * Note: don't confuse with the TCP sequence number(s), this is for the5849 * keepalive packet payload. The actual value is written into the packet5850 * in little endian.5851 */5852struct nl80211_wowlan_tcp_data_seq {5853 __u32 start, offset, len;5854};5855 5856/**5857 * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config5858 * @offset: offset of token in packet5859 * @len: length of each token5860 * @token_stream: stream of data to be used for the tokens, the length must5861 * be a multiple of @len for this to make sense5862 */5863struct nl80211_wowlan_tcp_data_token {5864 __u32 offset, len;5865 __u8 token_stream[];5866};5867 5868/**5869 * struct nl80211_wowlan_tcp_data_token_feature - data token features5870 * @min_len: minimum token length5871 * @max_len: maximum token length5872 * @bufsize: total available token buffer size (max size of @token_stream)5873 */5874struct nl80211_wowlan_tcp_data_token_feature {5875 __u32 min_len, max_len, bufsize;5876};5877 5878/**5879 * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters5880 * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes5881 * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order)5882 * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address5883 * (in network byte order)5884 * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because5885 * route lookup when configured might be invalid by the time we suspend,5886 * and doing a route lookup when suspending is no longer possible as it5887 * might require ARP querying.5888 * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a5889 * socket and port will be allocated5890 * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16)5891 * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte.5892 * For feature advertising, a u32 attribute holding the maximum length5893 * of the data payload.5894 * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration5895 * (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature5896 * advertising it is just a flag5897 * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration,5898 * see &struct nl80211_wowlan_tcp_data_token and for advertising see5899 * &struct nl80211_wowlan_tcp_data_token_feature.5900 * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum5901 * interval in feature advertising (u32)5902 * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a5903 * u32 attribute holding the maximum length5904 * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for5905 * feature advertising. The mask works like @NL80211_PKTPAT_MASK5906 * but on the TCP payload only.5907 * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes5908 * @MAX_NL80211_WOWLAN_TCP: highest attribute number5909 */5910enum nl80211_wowlan_tcp_attrs {5911 __NL80211_WOWLAN_TCP_INVALID,5912 NL80211_WOWLAN_TCP_SRC_IPV4,5913 NL80211_WOWLAN_TCP_DST_IPV4,5914 NL80211_WOWLAN_TCP_DST_MAC,5915 NL80211_WOWLAN_TCP_SRC_PORT,5916 NL80211_WOWLAN_TCP_DST_PORT,5917 NL80211_WOWLAN_TCP_DATA_PAYLOAD,5918 NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ,5919 NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN,5920 NL80211_WOWLAN_TCP_DATA_INTERVAL,5921 NL80211_WOWLAN_TCP_WAKE_PAYLOAD,5922 NL80211_WOWLAN_TCP_WAKE_MASK,5923 5924 /* keep last */5925 NUM_NL80211_WOWLAN_TCP,5926 MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 15927};5928 5929/**5930 * struct nl80211_coalesce_rule_support - coalesce rule support information5931 * @max_rules: maximum number of rules supported5932 * @pat: packet pattern support information5933 * @max_delay: maximum supported coalescing delay in msecs5934 *5935 * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the5936 * capability information given by the kernel to userspace.5937 */5938struct nl80211_coalesce_rule_support {5939 __u32 max_rules;5940 struct nl80211_pattern_support pat;5941 __u32 max_delay;5942} __attribute__((packed));5943 5944/**5945 * enum nl80211_attr_coalesce_rule - coalesce rule attribute5946 * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute5947 * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing5948 * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence,5949 * see &enum nl80211_coalesce_condition.5950 * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched5951 * after these fixed number of bytes of received packet5952 * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes5953 * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number5954 */5955enum nl80211_attr_coalesce_rule {5956 __NL80211_COALESCE_RULE_INVALID,5957 NL80211_ATTR_COALESCE_RULE_DELAY,5958 NL80211_ATTR_COALESCE_RULE_CONDITION,5959 NL80211_ATTR_COALESCE_RULE_PKT_PATTERN,5960 5961 /* keep last */5962 NUM_NL80211_ATTR_COALESCE_RULE,5963 NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 15964};5965 5966/**5967 * enum nl80211_coalesce_condition - coalesce rule conditions5968 * @NL80211_COALESCE_CONDITION_MATCH: coalesce Rx packets when patterns5969 * in a rule are matched.5970 * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns5971 * in a rule are not matched.5972 */5973enum nl80211_coalesce_condition {5974 NL80211_COALESCE_CONDITION_MATCH,5975 NL80211_COALESCE_CONDITION_NO_MATCH5976};5977 5978/**5979 * enum nl80211_iface_limit_attrs - limit attributes5980 * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)5981 * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that5982 * can be chosen from this set of interface types (u32)5983 * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a5984 * flag attribute for each interface type in this set5985 * @NUM_NL80211_IFACE_LIMIT: number of attributes5986 * @MAX_NL80211_IFACE_LIMIT: highest attribute number5987 */5988enum nl80211_iface_limit_attrs {5989 NL80211_IFACE_LIMIT_UNSPEC,5990 NL80211_IFACE_LIMIT_MAX,5991 NL80211_IFACE_LIMIT_TYPES,5992 5993 /* keep last */5994 NUM_NL80211_IFACE_LIMIT,5995 MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 15996};5997 5998/**5999 * enum nl80211_if_combination_attrs -- interface combination attributes6000 *6001 * @NL80211_IFACE_COMB_UNSPEC: (reserved)6002 * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits6003 * for given interface types, see &enum nl80211_iface_limit_attrs.6004 * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of6005 * interfaces that can be created in this group. This number doesn't6006 * apply to interfaces purely managed in software, which are listed6007 * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.6008 * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that6009 * beacon intervals within this group must be all the same even for6010 * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt6011 * the infrastructure network's beacon interval.6012 * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many6013 * different channels may be used within this group.6014 * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap6015 * of supported channel widths for radar detection.6016 * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap6017 * of supported regulatory regions for radar detection.6018 * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of6019 * different beacon intervals supported by all the interface combinations6020 * in this group (if not present, all beacon intervals be identical).6021 * @NUM_NL80211_IFACE_COMB: number of attributes6022 * @MAX_NL80211_IFACE_COMB: highest attribute number6023 *6024 * Examples:6025 * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 26026 * => allows an AP and a STA that must match BIs6027 *6028 * numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8,6029 * => allows 8 of AP/GO that can have BI gcd >= min gcd6030 *6031 * numbers = [ #{STA} <= 2 ], channels = 2, max = 26032 * => allows two STAs on the same or on different channels6033 *6034 * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 46035 * => allows a STA plus three P2P interfaces6036 *6037 * The list of these four possibilities could completely be contained6038 * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate6039 * that any of these groups must match.6040 *6041 * "Combinations" of just a single interface will not be listed here,6042 * a single interface of any valid interface type is assumed to always6043 * be possible by itself. This means that implicitly, for each valid6044 * interface type, the following group always exists:6045 * numbers = [ #{<type>} <= 1 ], channels = 1, max = 16046 */6047enum nl80211_if_combination_attrs {6048 NL80211_IFACE_COMB_UNSPEC,6049 NL80211_IFACE_COMB_LIMITS,6050 NL80211_IFACE_COMB_MAXNUM,6051 NL80211_IFACE_COMB_STA_AP_BI_MATCH,6052 NL80211_IFACE_COMB_NUM_CHANNELS,6053 NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,6054 NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,6055 NL80211_IFACE_COMB_BI_MIN_GCD,6056 6057 /* keep last */6058 NUM_NL80211_IFACE_COMB,6059 MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 16060};6061 6062 6063/**6064 * enum nl80211_plink_state - state of a mesh peer link finite state machine6065 *6066 * @NL80211_PLINK_LISTEN: initial state, considered the implicit6067 * state of non-existent mesh peer links6068 * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to6069 * this mesh peer6070 * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received6071 * from this mesh peer6072 * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been6073 * received from this mesh peer6074 * @NL80211_PLINK_ESTAB: mesh peer link is established6075 * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled6076 * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh6077 * plink are discarded, except for authentication frames6078 * @NUM_NL80211_PLINK_STATES: number of peer link states6079 * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states6080 */6081enum nl80211_plink_state {6082 NL80211_PLINK_LISTEN,6083 NL80211_PLINK_OPN_SNT,6084 NL80211_PLINK_OPN_RCVD,6085 NL80211_PLINK_CNF_RCVD,6086 NL80211_PLINK_ESTAB,6087 NL80211_PLINK_HOLDING,6088 NL80211_PLINK_BLOCKED,6089 6090 /* keep last */6091 NUM_NL80211_PLINK_STATES,6092 MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 16093};6094 6095/**6096 * enum nl80211_plink_action - actions to perform in mesh peers6097 *6098 * @NL80211_PLINK_ACTION_NO_ACTION: perform no action6099 * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment6100 * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer6101 * @NUM_NL80211_PLINK_ACTIONS: number of possible actions6102 */6103enum nl80211_plink_action {6104 NL80211_PLINK_ACTION_NO_ACTION,6105 NL80211_PLINK_ACTION_OPEN,6106 NL80211_PLINK_ACTION_BLOCK,6107 6108 NUM_NL80211_PLINK_ACTIONS,6109};6110 6111 6112#define NL80211_KCK_LEN 166113#define NL80211_KEK_LEN 166114#define NL80211_KCK_EXT_LEN 246115#define NL80211_KEK_EXT_LEN 326116#define NL80211_KCK_EXT_LEN_32 326117#define NL80211_REPLAY_CTR_LEN 86118 6119/**6120 * enum nl80211_rekey_data - attributes for GTK rekey offload6121 * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes6122 * @NL80211_REKEY_DATA_KEK: key encryption key (binary)6123 * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)6124 * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)6125 * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type)6126 * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)6127 * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)6128 */6129enum nl80211_rekey_data {6130 __NL80211_REKEY_DATA_INVALID,6131 NL80211_REKEY_DATA_KEK,6132 NL80211_REKEY_DATA_KCK,6133 NL80211_REKEY_DATA_REPLAY_CTR,6134 NL80211_REKEY_DATA_AKM,6135 6136 /* keep last */6137 NUM_NL80211_REKEY_DATA,6138 MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 16139};6140 6141/**6142 * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID6143 * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in6144 * Beacon frames)6145 * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element6146 * in Beacon frames6147 * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID6148 * element in Beacon frames but zero out each byte in the SSID6149 */6150enum nl80211_hidden_ssid {6151 NL80211_HIDDEN_SSID_NOT_IN_USE,6152 NL80211_HIDDEN_SSID_ZERO_LEN,6153 NL80211_HIDDEN_SSID_ZERO_CONTENTS6154};6155 6156/**6157 * enum nl80211_sta_wme_attr - station WME attributes6158 * @__NL80211_STA_WME_INVALID: invalid number for nested attribute6159 * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format6160 * is the same as the AC bitmap in the QoS info field.6161 * @NL80211_STA_WME_MAX_SP: max service period. the format is the same6162 * as the MAX_SP field in the QoS info field (but already shifted down).6163 * @__NL80211_STA_WME_AFTER_LAST: internal6164 * @NL80211_STA_WME_MAX: highest station WME attribute6165 */6166enum nl80211_sta_wme_attr {6167 __NL80211_STA_WME_INVALID,6168 NL80211_STA_WME_UAPSD_QUEUES,6169 NL80211_STA_WME_MAX_SP,6170 6171 /* keep last */6172 __NL80211_STA_WME_AFTER_LAST,6173 NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 16174};6175 6176/**6177 * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates6178 * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes6179 * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher6180 * priority)6181 * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)6182 * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)6183 * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes6184 * (internal)6185 * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute6186 * (internal)6187 */6188enum nl80211_pmksa_candidate_attr {6189 __NL80211_PMKSA_CANDIDATE_INVALID,6190 NL80211_PMKSA_CANDIDATE_INDEX,6191 NL80211_PMKSA_CANDIDATE_BSSID,6192 NL80211_PMKSA_CANDIDATE_PREAUTH,6193 6194 /* keep last */6195 NUM_NL80211_PMKSA_CANDIDATE,6196 MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 16197};6198 6199/**6200 * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION6201 * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request6202 * @NL80211_TDLS_SETUP: Setup TDLS link6203 * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established6204 * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link6205 * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link6206 */6207enum nl80211_tdls_operation {6208 NL80211_TDLS_DISCOVERY_REQ,6209 NL80211_TDLS_SETUP,6210 NL80211_TDLS_TEARDOWN,6211 NL80211_TDLS_ENABLE_LINK,6212 NL80211_TDLS_DISABLE_LINK,6213};6214 6215/**6216 * enum nl80211_ap_sme_features - device-integrated AP features6217 * @NL80211_AP_SME_SA_QUERY_OFFLOAD: SA Query procedures offloaded to driver6218 * when user space indicates support for SA Query procedures offload during6219 * "start ap" with %NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT.6220 */6221enum nl80211_ap_sme_features {6222 NL80211_AP_SME_SA_QUERY_OFFLOAD = 1 << 0,6223};6224 6225/**6226 * enum nl80211_feature_flags - device/driver features6227 * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back6228 * TX status to the socket error queue when requested with the6229 * socket option.6230 * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.6231 * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up6232 * the connected inactive stations in AP mode.6233 * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested6234 * to work properly to support receiving regulatory hints from6235 * cellular base stations.6236 * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only6237 * here to reserve the value for API/ABI compatibility)6238 * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of6239 * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station6240 * mode6241 * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan6242 * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported6243 * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif6244 * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting6245 * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform6246 * OBSS scans and generate 20/40 BSS coex reports. This flag is used only6247 * for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied.6248 * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window6249 * setting6250 * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic6251 * powersave6252 * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state6253 * transitions for AP clients. Without this flag (and if the driver6254 * doesn't have the AP SME in the device) the driver supports adding6255 * stations only when they're associated and adds them in associated6256 * state (to later be transitioned into authorized), with this flag6257 * they should be added before even sending the authentication reply6258 * and then transitioned into authenticated, associated and authorized6259 * states using station flags.6260 * Note that even for drivers that support this, the default is to add6261 * stations in authenticated/associated state, so to add unauthenticated6262 * stations the authenticated/associated bits have to be set in the mask.6263 * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits6264 * (HT40, VHT 80/160 MHz) if this flag is set6265 * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh6266 * Peering Management entity which may be implemented by registering for6267 * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is6268 * still generated by the driver.6269 * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor6270 * interface. An active monitor interface behaves like a normal monitor6271 * interface, but gets added to the driver. It ensures that incoming6272 * unicast packets directed at the configured interface address get ACKed.6273 * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic6274 * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the6275 * lifetime of a BSS.6276 * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter6277 * Set IE to probe requests.6278 * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE6279 * to probe requests.6280 * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period6281 * requests sent to it by an AP.6282 * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the6283 * current tx power value into the TPC Report IE in the spectrum6284 * management TPC Report action frame, and in the Radio Measurement Link6285 * Measurement Report action frame.6286 * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout6287 * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used6288 * to enable dynack.6289 * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial6290 * multiplexing powersave, ie. can turn off all but one chain6291 * even on HT connections that should be using more chains.6292 * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial6293 * multiplexing powersave, ie. can turn off all but one chain6294 * and then wake the rest up as required after, for example,6295 * rts/cts handshake.6296 * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM6297 * TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS6298 * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it6299 * needs to be able to handle Block-Ack agreements and other things.6300 * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring6301 * the vif's MAC address upon creation.6302 * See 'macaddr' field in the vif_params (cfg80211.h).6303 * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when6304 * operating as a TDLS peer.6305 * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a6306 * random MAC address during scan (if the device is unassociated); the6307 * %NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC6308 * address mask/value will be used.6309 * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports6310 * using a random MAC address for every scan iteration during scheduled6311 * scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may6312 * be set for scheduled scan and the MAC address mask/value will be used.6313 * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a6314 * random MAC address for every scan iteration during "net detect", i.e.6315 * scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may6316 * be set for scheduled scan and the MAC address mask/value will be used.6317 */6318enum nl80211_feature_flags {6319 NL80211_FEATURE_SK_TX_STATUS = 1 << 0,6320 NL80211_FEATURE_HT_IBSS = 1 << 1,6321 NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,6322 NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,6323 NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4,6324 NL80211_FEATURE_SAE = 1 << 5,6325 NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6,6326 NL80211_FEATURE_SCAN_FLUSH = 1 << 7,6327 NL80211_FEATURE_AP_SCAN = 1 << 8,6328 NL80211_FEATURE_VIF_TXPOWER = 1 << 9,6329 NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10,6330 NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11,6331 NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12,6332 /* bit 13 is reserved */6333 NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14,6334 NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15,6335 NL80211_FEATURE_USERSPACE_MPM = 1 << 16,6336 NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17,6337 NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18,6338 NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES = 1 << 19,6339 NL80211_FEATURE_WFA_TPC_IE_IN_PROBES = 1 << 20,6340 NL80211_FEATURE_QUIET = 1 << 21,6341 NL80211_FEATURE_TX_POWER_INSERTION = 1 << 22,6342 NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23,6343 NL80211_FEATURE_STATIC_SMPS = 1 << 24,6344 NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25,6345 NL80211_FEATURE_SUPPORTS_WMM_ADMISSION = 1 << 26,6346 NL80211_FEATURE_MAC_ON_CREATE = 1 << 27,6347 NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28,6348 NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29,6349 NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30,6350 NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1U << 31,6351};6352 6353/**6354 * enum nl80211_ext_feature_index - bit index of extended features.6355 * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.6356 * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can6357 * request to use RRM (see %NL80211_ATTR_USE_RRM) with6358 * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set6359 * the ASSOC_REQ_USE_RRM flag in the association request even if6360 * NL80211_FEATURE_QUIET is not advertised.6361 * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air6362 * sniffer which means that it can be configured to hear packets from6363 * certain groups which can be configured by the6364 * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute,6365 * or can be configured to follow a station by configuring the6366 * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute.6367 * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual6368 * time the scan started in scan results event. The time is the TSF of6369 * the BSS that the interface that requested the scan is connected to6370 * (if available).6371 * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the6372 * time the last beacon/probe was received. For a non-MLO connection, the6373 * time is the TSF of the BSS that the interface that requested the scan is6374 * connected to (if available). For an MLO connection, the time is the TSF6375 * of the BSS corresponding with link ID specified in the scan request (if6376 * specified).6377 * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of6378 * channel dwell time.6379 * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate6380 * configuration (AP/mesh), supporting a legacy (non-HT/VHT) rate.6381 * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate6382 * configuration (AP/mesh) with HT rates.6383 * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate6384 * configuration (AP/mesh) with VHT rates.6385 * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup6386 * with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.6387 * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA6388 * in @NL80211_CMD_FRAME while not associated.6389 * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports6390 * randomized TA in @NL80211_CMD_FRAME while associated.6391 * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan6392 * for reporting BSSs with better RSSI than the current connected BSS6393 * (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).6394 * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the6395 * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more6396 * RSSI threshold values to monitor rather than exactly one threshold.6397 * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key6398 * authentication with %NL80211_CMD_CONNECT.6399 * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way6400 * handshake with PSK in station mode (PSK is passed as part of the connect6401 * and associate commands), doing it in the host might not be supported.6402 * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way6403 * handshake with 802.1X in station mode (will pass EAP frames to the host6404 * and accept the set_pmk/del_pmk commands), doing it in the host might not6405 * be supported.6406 * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding6407 * the max channel attribute in the FILS request params IE with the6408 * actual dwell time.6409 * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe6410 * response6411 * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending6412 * the first probe request in each channel at rate of at least 5.5Mbps.6413 * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports6414 * probe request tx deferral and suppression6415 * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL6416 * value in %NL80211_ATTR_USE_MFP.6417 * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan.6418 * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan.6419 * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan.6420 * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions.6421 * Device or driver will do all DFS-related actions by itself,6422 * informing user-space about CAC progress, radar detection event,6423 * channel change triggered by radar detection event.6424 * No need to start CAC from user-space, no need to react to6425 * "radar detected" event.6426 * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and6427 * receiving control port frames over nl80211 instead of the netdevice.6428 * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports6429 * (average) ACK signal strength reporting.6430 * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: Backward-compatible ID6431 * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate6432 * TXQs.6433 * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the6434 * SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN.6435 * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data6436 * except for supported rates from the probe request content if requested6437 * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag.6438 * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine6439 * timing measurement responder role.6440 *6441 * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are6442 * able to rekey an in-use key correctly. Userspace must not rekey PTK keys6443 * if this flag is not set. Ignoring this can leak clear text packets and/or6444 * freeze the connection.6445 * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for6446 * Individually Addressed Frames" from IEEE802.11-2016.6447 *6448 * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime6449 * fairness for transmitted packets and has enabled airtime fairness6450 * scheduling.6451 *6452 * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching6453 * (set/del PMKSA operations) in AP mode.6454 *6455 * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Obsolete6456 *6457 * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power6458 * to a station.6459 *6460 * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in6461 * station mode (SAE password is passed as part of the connect command).6462 *6463 * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev6464 * with VLAN tagged frames and separate VLAN-specific netdevs added using6465 * vconfig similarly to the Ethernet case.6466 *6467 * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL)6468 * feature, which prevents bufferbloat by using the expected transmission6469 * time to limit the amount of data buffered in the hardware.6470 *6471 * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection6472 * and can receive key configuration for BIGTK using key indexes 6 and 7.6473 * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon6474 * protection as a client only and cannot transmit protected beacons.6475 *6476 * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the6477 * forwarding of preauth frames over the control port. They are then6478 * handled as ordinary data frames.6479 *6480 * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames6481 *6482 * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations6483 * in IBSS mode, essentially by dropping their state.6484 *6485 * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations6486 * are possible for multicast frames and those will be reported properly.6487 *6488 * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and6489 * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to6490 * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be6491 * included in the scan request.6492 *6493 * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver6494 * can report tx status for control port over nl80211 tx operations.6495 *6496 * @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating6497 * Channel Validation (OCV) when using driver's SME for RSNA handshakes.6498 *6499 * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK: Device wants to do 4-way6500 * handshake with PSK in AP mode (PSK is passed as part of the start AP6501 * command).6502 *6503 * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication6504 * in AP mode (SAE password is passed as part of the start AP command).6505 *6506 * @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery6507 * frames transmission6508 *6509 * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports6510 * unsolicited broadcast probe response transmission6511 *6512 * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate6513 * configuration (AP/mesh) with HE rates.6514 *6515 * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement6516 * exchange protocol.6517 *6518 * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement6519 * exchange protocol.6520 *6521 * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management6522 * frame protection for all management frames exchanged during the6523 * negotiation and range measurement procedure.6524 *6525 * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision6526 * detection and change announcemnts.6527 *6528 * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports6529 * FILS encryption and decryption for (Re)Association Request and Response6530 * frames. Userspace has to share FILS AAD details to the driver by using6531 * @NL80211_CMD_SET_FILS_AAD.6532 *6533 * @NL80211_EXT_FEATURE_RADAR_BACKGROUND: Device supports background radar/CAC6534 * detection.6535 *6536 * @NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE: Device can perform a MAC address6537 * change without having to bring the underlying network device down6538 * first. For example, in station mode this can be used to vary the6539 * origin MAC address prior to a connection to a new AP for privacy6540 * or other reasons. Note that certain driver specific restrictions6541 * might apply, e.g. no scans in progress, no offchannel operations6542 * in progress, and no active connections.6543 *6544 * @NL80211_EXT_FEATURE_PUNCT: Driver supports preamble puncturing in AP mode.6545 *6546 * @NL80211_EXT_FEATURE_SECURE_NAN: Device supports NAN Pairing which enables6547 * authentication, data encryption and message integrity.6548 *6549 * @NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA: Device supports randomized TA6550 * in authentication and deauthentication frames sent to unassociated peer6551 * using @NL80211_CMD_FRAME.6552 *6553 * @NL80211_EXT_FEATURE_OWE_OFFLOAD: Driver/Device wants to do OWE DH IE6554 * handling in station mode.6555 *6556 * @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE6557 * handling in AP mode.6558 *6559 * @NL80211_EXT_FEATURE_DFS_CONCURRENT: The device supports peer-to-peer or6560 * ad hoc operation on DFS channels under the control of a concurrent6561 * DFS master on the same channel as described in FCC-594280 D016562 * (Section B.3). This, for example, allows P2P GO and P2P clients to6563 * operate on DFS channels as long as there's a concurrent BSS connection.6564 *6565 * @NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT: The driver has support for SPP6566 * (signaling and payload protected) A-MSDUs and this shall be advertised6567 * in the RSNXE.6568 *6569 * @NUM_NL80211_EXT_FEATURES: number of extended features.6570 * @MAX_NL80211_EXT_FEATURES: highest extended feature index.6571 */6572enum nl80211_ext_feature_index {6573 NL80211_EXT_FEATURE_VHT_IBSS,6574 NL80211_EXT_FEATURE_RRM,6575 NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER,6576 NL80211_EXT_FEATURE_SCAN_START_TIME,6577 NL80211_EXT_FEATURE_BSS_PARENT_TSF,6578 NL80211_EXT_FEATURE_SET_SCAN_DWELL,6579 NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,6580 NL80211_EXT_FEATURE_BEACON_RATE_HT,6581 NL80211_EXT_FEATURE_BEACON_RATE_VHT,6582 NL80211_EXT_FEATURE_FILS_STA,6583 NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,6584 NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,6585 NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,6586 NL80211_EXT_FEATURE_CQM_RSSI_LIST,6587 NL80211_EXT_FEATURE_FILS_SK_OFFLOAD,6588 NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK,6589 NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X,6590 NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME,6591 NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP,6592 NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE,6593 NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION,6594 NL80211_EXT_FEATURE_MFP_OPTIONAL,6595 NL80211_EXT_FEATURE_LOW_SPAN_SCAN,6596 NL80211_EXT_FEATURE_LOW_POWER_SCAN,6597 NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,6598 NL80211_EXT_FEATURE_DFS_OFFLOAD,6599 NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211,6600 NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,6601 /* we renamed this - stay compatible */6602 NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,6603 NL80211_EXT_FEATURE_TXQS,6604 NL80211_EXT_FEATURE_SCAN_RANDOM_SN,6605 NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,6606 NL80211_EXT_FEATURE_CAN_REPLACE_PTK0,6607 NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,6608 NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,6609 NL80211_EXT_FEATURE_AP_PMKSA_CACHING,6610 NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, /* obsolete */6611 NL80211_EXT_FEATURE_EXT_KEY_ID,6612 NL80211_EXT_FEATURE_STA_TX_PWR,6613 NL80211_EXT_FEATURE_SAE_OFFLOAD,6614 NL80211_EXT_FEATURE_VLAN_OFFLOAD,6615 NL80211_EXT_FEATURE_AQL,6616 NL80211_EXT_FEATURE_BEACON_PROTECTION,6617 NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH,6618 NL80211_EXT_FEATURE_PROTECTED_TWT,6619 NL80211_EXT_FEATURE_DEL_IBSS_STA,6620 NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS,6621 NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT,6622 NL80211_EXT_FEATURE_SCAN_FREQ_KHZ,6623 NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS,6624 NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION,6625 NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK,6626 NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,6627 NL80211_EXT_FEATURE_FILS_DISCOVERY,6628 NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,6629 NL80211_EXT_FEATURE_BEACON_RATE_HE,6630 NL80211_EXT_FEATURE_SECURE_LTF,6631 NL80211_EXT_FEATURE_SECURE_RTT,6632 NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,6633 NL80211_EXT_FEATURE_BSS_COLOR,6634 NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD,6635 NL80211_EXT_FEATURE_RADAR_BACKGROUND,6636 NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE,6637 NL80211_EXT_FEATURE_PUNCT,6638 NL80211_EXT_FEATURE_SECURE_NAN,6639 NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA,6640 NL80211_EXT_FEATURE_OWE_OFFLOAD,6641 NL80211_EXT_FEATURE_OWE_OFFLOAD_AP,6642 NL80211_EXT_FEATURE_DFS_CONCURRENT,6643 NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT,6644 6645 /* add new features before the definition below */6646 NUM_NL80211_EXT_FEATURES,6647 MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 16648};6649 6650/**6651 * enum nl80211_probe_resp_offload_support_attr - optional supported6652 * protocols for probe-response offloading by the driver/FW.6653 * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.6654 * Each enum value represents a bit in the bitmap of supported6655 * protocols. Typically a subset of probe-requests belonging to a6656 * supported protocol will be excluded from offload and uploaded6657 * to the host.6658 *6659 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 16660 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 26661 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P6662 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u6663 */6664enum nl80211_probe_resp_offload_support_attr {6665 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0,6666 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1,6667 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2,6668 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3,6669};6670 6671/**6672 * enum nl80211_connect_failed_reason - connection request failed reasons6673 * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be6674 * handled by the AP is reached.6675 * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL.6676 */6677enum nl80211_connect_failed_reason {6678 NL80211_CONN_FAIL_MAX_CLIENTS,6679 NL80211_CONN_FAIL_BLOCKED_CLIENT,6680};6681 6682/**6683 * enum nl80211_timeout_reason - timeout reasons6684 *6685 * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified.6686 * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out.6687 * @NL80211_TIMEOUT_AUTH: Authentication timed out.6688 * @NL80211_TIMEOUT_ASSOC: Association timed out.6689 */6690enum nl80211_timeout_reason {6691 NL80211_TIMEOUT_UNSPECIFIED,6692 NL80211_TIMEOUT_SCAN,6693 NL80211_TIMEOUT_AUTH,6694 NL80211_TIMEOUT_ASSOC,6695};6696 6697/**6698 * enum nl80211_scan_flags - scan request control flags6699 *6700 * Scan request control flags are used to control the handling6701 * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN6702 * requests.6703 *6704 * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and6705 * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only6706 * one of them can be used in the request.6707 *6708 * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority6709 * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning6710 * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured6711 * as AP and the beaconing has already been configured. This attribute is6712 * dangerous because will destroy stations performance as a lot of frames6713 * will be lost while scanning off-channel, therefore it must be used only6714 * when really needed6715 * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or6716 * for scheduled scan: a different one for every scan iteration). When the6717 * flag is set, depending on device capabilities the @NL80211_ATTR_MAC and6718 * @NL80211_ATTR_MAC_MASK attributes may also be given in which case only6719 * the masked bits will be preserved from the MAC address and the remainder6720 * randomised. If the attributes are not given full randomisation (46 bits,6721 * locally administered 1, multicast 0) is assumed.6722 * This flag must not be requested when the feature isn't supported, check6723 * the nl80211 feature flags for the device.6724 * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS6725 * request parameters IE in the probe request6726 * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses6727 * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at6728 * rate of at least 5.5M. In case non-OCE AP is discovered in the channel,6729 * only the first probe req in the channel will be sent in high rate.6730 * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request6731 * tx deferral (dot11FILSProbeDelay shall be set to 15ms)6732 * and suppression (if it has received a broadcast Probe Response frame,6733 * Beacon frame or FILS Discovery frame from an AP that the STA considers6734 * a suitable candidate for (re-)association - suitable in terms of6735 * SSID and/or RSSI.6736 * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to6737 * accomplish the scan. Thus, this flag intends the driver to perform the6738 * scan request with lesser span/duration. It is specific to the driver6739 * implementations on how this is accomplished. Scan accuracy may get6740 * impacted with this flag.6741 * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume6742 * optimal possible power. Drivers can resort to their specific means to6743 * optimize the power. Scan accuracy may get impacted with this flag.6744 * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan6745 * results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum6746 * possible scan results. This flag hints the driver to use the best6747 * possible scan configuration to improve the accuracy in scanning.6748 * Latency and power use may get impacted with this flag.6749 * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe6750 * request frames from this scan to avoid correlation/tracking being6751 * possible.6752 * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to6753 * only have supported rates and no additional capabilities (unless6754 * added by userspace explicitly.)6755 * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with6756 * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means6757 * %NL80211_ATTR_SCAN_FREQUENCIES will not be included.6758 * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for collocated APs reported by6759 * 2.4/5 GHz APs. When the flag is set, the scan logic will use the6760 * information from the RNR element found in beacons/probe responses6761 * received on the 2.4/5 GHz channels to actively scan only the 6GHz6762 * channels on which APs are expected to be found. Note that when not set,6763 * the scan logic would scan all 6GHz channels, but since transmission of6764 * probe requests on non-PSC channels is limited, it is highly likely that6765 * these channels would passively be scanned. Also note that when the flag6766 * is set, in addition to the colocated APs, PSC channels would also be6767 * scanned if the user space has asked for it.6768 */6769enum nl80211_scan_flags {6770 NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,6771 NL80211_SCAN_FLAG_FLUSH = 1<<1,6772 NL80211_SCAN_FLAG_AP = 1<<2,6773 NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3,6774 NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME = 1<<4,6775 NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5,6776 NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6,6777 NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7,6778 NL80211_SCAN_FLAG_LOW_SPAN = 1<<8,6779 NL80211_SCAN_FLAG_LOW_POWER = 1<<9,6780 NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10,6781 NL80211_SCAN_FLAG_RANDOM_SN = 1<<11,6782 NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12,6783 NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13,6784 NL80211_SCAN_FLAG_COLOCATED_6GHZ = 1<<14,6785};6786 6787/**6788 * enum nl80211_acl_policy - access control policy6789 *6790 * Access control policy is applied on a MAC list set by6791 * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to6792 * be used with %NL80211_ATTR_ACL_POLICY.6793 *6794 * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are6795 * listed in ACL, i.e. allow all the stations which are not listed6796 * in ACL to authenticate.6797 * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed6798 * in ACL, i.e. deny all the stations which are not listed in ACL.6799 */6800enum nl80211_acl_policy {6801 NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED,6802 NL80211_ACL_POLICY_DENY_UNLESS_LISTED,6803};6804 6805/**6806 * enum nl80211_smps_mode - SMPS mode6807 *6808 * Requested SMPS mode (for AP mode)6809 *6810 * @NL80211_SMPS_OFF: SMPS off (use all antennas).6811 * @NL80211_SMPS_STATIC: static SMPS (use a single antenna)6812 * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and6813 * turn on other antennas after CTS/RTS).6814 * @__NL80211_SMPS_AFTER_LAST: internal6815 * @NL80211_SMPS_MAX: highest used enumeration6816 */6817enum nl80211_smps_mode {6818 NL80211_SMPS_OFF,6819 NL80211_SMPS_STATIC,6820 NL80211_SMPS_DYNAMIC,6821 6822 __NL80211_SMPS_AFTER_LAST,6823 NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 16824};6825 6826/**6827 * enum nl80211_radar_event - type of radar event for DFS operation6828 *6829 * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace6830 * about detected radars or success of the channel available check (CAC)6831 *6832 * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is6833 * now unusable.6834 * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished,6835 * the channel is now available.6836 * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no6837 * change to the channel status.6838 * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is6839 * over, channel becomes usable.6840 * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this6841 * non-operating channel is expired and no longer valid. New CAC must6842 * be done on this channel before starting the operation. This is not6843 * applicable for ETSI dfs domain where pre-CAC is valid for ever.6844 * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started,6845 * should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled.6846 */6847enum nl80211_radar_event {6848 NL80211_RADAR_DETECTED,6849 NL80211_RADAR_CAC_FINISHED,6850 NL80211_RADAR_CAC_ABORTED,6851 NL80211_RADAR_NOP_FINISHED,6852 NL80211_RADAR_PRE_CAC_EXPIRED,6853 NL80211_RADAR_CAC_STARTED,6854};6855 6856/**6857 * enum nl80211_dfs_state - DFS states for channels6858 *6859 * Channel states used by the DFS code.6860 *6861 * @NL80211_DFS_USABLE: The channel can be used, but channel availability6862 * check (CAC) must be performed before using it for AP or IBSS.6863 * @NL80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it6864 * is therefore marked as not available.6865 * @NL80211_DFS_AVAILABLE: The channel has been CAC checked and is available.6866 */6867enum nl80211_dfs_state {6868 NL80211_DFS_USABLE,6869 NL80211_DFS_UNAVAILABLE,6870 NL80211_DFS_AVAILABLE,6871};6872 6873/**6874 * enum nl80211_protocol_features - nl80211 protocol features6875 * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting6876 * wiphy dumps (if requested by the application with the attribute6877 * %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the6878 * wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or6879 * %NL80211_ATTR_WDEV.6880 */6881enum nl80211_protocol_features {6882 NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP = 1 << 0,6883};6884 6885/**6886 * enum nl80211_crit_proto_id - nl80211 critical protocol identifiers6887 *6888 * @NL80211_CRIT_PROTO_UNSPEC: protocol unspecified.6889 * @NL80211_CRIT_PROTO_DHCP: BOOTP or DHCPv6 protocol.6890 * @NL80211_CRIT_PROTO_EAPOL: EAPOL protocol.6891 * @NL80211_CRIT_PROTO_APIPA: APIPA protocol.6892 * @NUM_NL80211_CRIT_PROTO: must be kept last.6893 */6894enum nl80211_crit_proto_id {6895 NL80211_CRIT_PROTO_UNSPEC,6896 NL80211_CRIT_PROTO_DHCP,6897 NL80211_CRIT_PROTO_EAPOL,6898 NL80211_CRIT_PROTO_APIPA,6899 /* add other protocols before this one */6900 NUM_NL80211_CRIT_PROTO6901};6902 6903/* maximum duration for critical protocol measures */6904#define NL80211_CRIT_PROTO_MAX_DURATION 5000 /* msec */6905 6906/**6907 * enum nl80211_rxmgmt_flags - flags for received management frame.6908 *6909 * Used by cfg80211_rx_mgmt()6910 *6911 * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver.6912 * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload6913 * the authentication. Exclusively defined for host drivers that6914 * advertises the SME functionality but would like the userspace6915 * to handle certain authentication algorithms (e.g. SAE).6916 */6917enum nl80211_rxmgmt_flags {6918 NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0,6919 NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1,6920};6921 6922/*6923 * If this flag is unset, the lower 24 bits are an OUI, if set6924 * a Linux nl80211 vendor ID is used (no such IDs are allocated6925 * yet, so that's not valid so far)6926 */6927#define NL80211_VENDOR_ID_IS_LINUX 0x800000006928 6929/**6930 * struct nl80211_vendor_cmd_info - vendor command data6931 * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the6932 * value is a 24-bit OUI; if it is set then a separately allocated ID6933 * may be used, but no such IDs are allocated yet. New IDs should be6934 * added to this file when needed.6935 * @subcmd: sub-command ID for the command6936 */6937struct nl80211_vendor_cmd_info {6938 __u32 vendor_id;6939 __u32 subcmd;6940};6941 6942/**6943 * enum nl80211_tdls_peer_capability - TDLS peer flags.6944 *6945 * Used by tdls_mgmt() to determine which conditional elements need6946 * to be added to TDLS Setup frames.6947 *6948 * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.6949 * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.6950 * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.6951 * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable.6952 */6953enum nl80211_tdls_peer_capability {6954 NL80211_TDLS_PEER_HT = 1<<0,6955 NL80211_TDLS_PEER_VHT = 1<<1,6956 NL80211_TDLS_PEER_WMM = 1<<2,6957 NL80211_TDLS_PEER_HE = 1<<3,6958};6959 6960/**6961 * enum nl80211_sched_scan_plan - scanning plan for scheduled scan6962 * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved6963 * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In6964 * seconds (u32).6965 * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this6966 * scan plan (u32). The last scan plan must not specify this attribute6967 * because it will run infinitely. A value of zero is invalid as it will6968 * make the scan plan meaningless.6969 * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number6970 * currently defined6971 * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use6972 */6973enum nl80211_sched_scan_plan {6974 __NL80211_SCHED_SCAN_PLAN_INVALID,6975 NL80211_SCHED_SCAN_PLAN_INTERVAL,6976 NL80211_SCHED_SCAN_PLAN_ITERATIONS,6977 6978 /* keep last */6979 __NL80211_SCHED_SCAN_PLAN_AFTER_LAST,6980 NL80211_SCHED_SCAN_PLAN_MAX =6981 __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 16982};6983 6984/**6985 * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.6986 *6987 * @band: band of BSS that must match for RSSI value adjustment. The value6988 * of this field is according to &enum nl80211_band.6989 * @delta: value used to adjust the RSSI value of matching BSS in dB.6990 */6991struct nl80211_bss_select_rssi_adjust {6992 __u8 band;6993 __s8 delta;6994} __attribute__((packed));6995 6996/**6997 * enum nl80211_bss_select_attr - attributes for bss selection.6998 *6999 * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved.7000 * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection7001 * is requested.7002 * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS7003 * selection should be done such that the specified band is preferred.7004 * When there are multiple BSS-es in the preferred band, the driver7005 * shall use RSSI-based BSS selection as a second step. The value of7006 * this attribute is according to &enum nl80211_band (u32).7007 * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for7008 * BSS-es in the specified band is to be adjusted before doing7009 * RSSI-based BSS selection. The attribute value is a packed structure7010 * value as specified by &struct nl80211_bss_select_rssi_adjust.7011 * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.7012 * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use.7013 *7014 * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT7015 * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour7016 * which the driver shall use.7017 */7018enum nl80211_bss_select_attr {7019 __NL80211_BSS_SELECT_ATTR_INVALID,7020 NL80211_BSS_SELECT_ATTR_RSSI,7021 NL80211_BSS_SELECT_ATTR_BAND_PREF,7022 NL80211_BSS_SELECT_ATTR_RSSI_ADJUST,7023 7024 /* keep last */7025 __NL80211_BSS_SELECT_ATTR_AFTER_LAST,7026 NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 17027};7028 7029/**7030 * enum nl80211_nan_function_type - NAN function type7031 *7032 * Defines the function type of a NAN function7033 *7034 * @NL80211_NAN_FUNC_PUBLISH: function is publish7035 * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe7036 * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up7037 * @__NL80211_NAN_FUNC_TYPE_AFTER_LAST: internal use7038 * @NL80211_NAN_FUNC_MAX_TYPE: internal use7039 */7040enum nl80211_nan_function_type {7041 NL80211_NAN_FUNC_PUBLISH,7042 NL80211_NAN_FUNC_SUBSCRIBE,7043 NL80211_NAN_FUNC_FOLLOW_UP,7044 7045 /* keep last */7046 __NL80211_NAN_FUNC_TYPE_AFTER_LAST,7047 NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1,7048};7049 7050/**7051 * enum nl80211_nan_publish_type - NAN publish tx type7052 *7053 * Defines how to send publish Service Discovery Frames7054 *7055 * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited7056 * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited7057 */7058enum nl80211_nan_publish_type {7059 NL80211_NAN_SOLICITED_PUBLISH = 1 << 0,7060 NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1,7061};7062 7063/**7064 * enum nl80211_nan_func_term_reason - NAN functions termination reason7065 *7066 * Defines termination reasons of a NAN function7067 *7068 * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user7069 * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout7070 * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored7071 */7072enum nl80211_nan_func_term_reason {7073 NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST,7074 NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED,7075 NL80211_NAN_FUNC_TERM_REASON_ERROR,7076};7077 7078#define NL80211_NAN_FUNC_SERVICE_ID_LEN 67079#define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff7080#define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff7081 7082/**7083 * enum nl80211_nan_func_attributes - NAN function attributes7084 * @__NL80211_NAN_FUNC_INVALID: invalid7085 * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8).7086 * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as7087 * specified in NAN spec. This is a binary attribute.7088 * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is7089 * publish. Defines the transmission type for the publish Service Discovery7090 * Frame, see &enum nl80211_nan_publish_type. Its type is u8.7091 * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited7092 * publish. Should the solicited publish Service Discovery Frame be sent to7093 * the NAN Broadcast address. This is a flag.7094 * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is7095 * subscribe. Is the subscribe active. This is a flag.7096 * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up.7097 * The instance ID for the follow up Service Discovery Frame. This is u8.7098 * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type7099 * is follow up. This is a u8.7100 * The requester instance ID for the follow up Service Discovery Frame.7101 * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the7102 * follow up Service Discovery Frame. This is a binary attribute.7103 * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a7104 * close range. The range itself (RSSI) is defined by the device.7105 * This is a flag.7106 * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should7107 * stay active. If not present infinite TTL is assumed. This is a u32.7108 * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service7109 * specific info. This is a binary attribute.7110 * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute.7111 * See &enum nl80211_nan_srf_attributes.7112 * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested7113 * attribute. It is a list of binary values.7114 * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a7115 * nested attribute. It is a list of binary values.7116 * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function.7117 * Its type is u8 and it cannot be 0.7118 * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason.7119 * See &enum nl80211_nan_func_term_reason.7120 *7121 * @NUM_NL80211_NAN_FUNC_ATTR: internal7122 * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute7123 */7124enum nl80211_nan_func_attributes {7125 __NL80211_NAN_FUNC_INVALID,7126 NL80211_NAN_FUNC_TYPE,7127 NL80211_NAN_FUNC_SERVICE_ID,7128 NL80211_NAN_FUNC_PUBLISH_TYPE,7129 NL80211_NAN_FUNC_PUBLISH_BCAST,7130 NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE,7131 NL80211_NAN_FUNC_FOLLOW_UP_ID,7132 NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID,7133 NL80211_NAN_FUNC_FOLLOW_UP_DEST,7134 NL80211_NAN_FUNC_CLOSE_RANGE,7135 NL80211_NAN_FUNC_TTL,7136 NL80211_NAN_FUNC_SERVICE_INFO,7137 NL80211_NAN_FUNC_SRF,7138 NL80211_NAN_FUNC_RX_MATCH_FILTER,7139 NL80211_NAN_FUNC_TX_MATCH_FILTER,7140 NL80211_NAN_FUNC_INSTANCE_ID,7141 NL80211_NAN_FUNC_TERM_REASON,7142 7143 /* keep last */7144 NUM_NL80211_NAN_FUNC_ATTR,7145 NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 17146};7147 7148/**7149 * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes7150 * @__NL80211_NAN_SRF_INVALID: invalid7151 * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set.7152 * This is a flag.7153 * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if7154 * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.7155 * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if7156 * %NL80211_NAN_SRF_BF is present. This is a u8.7157 * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if7158 * and only if %NL80211_NAN_SRF_BF isn't present. This is a nested7159 * attribute. Each nested attribute is a MAC address.7160 * @NUM_NL80211_NAN_SRF_ATTR: internal7161 * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute7162 */7163enum nl80211_nan_srf_attributes {7164 __NL80211_NAN_SRF_INVALID,7165 NL80211_NAN_SRF_INCLUDE,7166 NL80211_NAN_SRF_BF,7167 NL80211_NAN_SRF_BF_IDX,7168 NL80211_NAN_SRF_MAC_ADDRS,7169 7170 /* keep last */7171 NUM_NL80211_NAN_SRF_ATTR,7172 NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1,7173};7174 7175/**7176 * enum nl80211_nan_match_attributes - NAN match attributes7177 * @__NL80211_NAN_MATCH_INVALID: invalid7178 * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the7179 * match. This is a nested attribute.7180 * See &enum nl80211_nan_func_attributes.7181 * @NL80211_NAN_MATCH_FUNC_PEER: the peer function7182 * that caused the match. This is a nested attribute.7183 * See &enum nl80211_nan_func_attributes.7184 *7185 * @NUM_NL80211_NAN_MATCH_ATTR: internal7186 * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute7187 */7188enum nl80211_nan_match_attributes {7189 __NL80211_NAN_MATCH_INVALID,7190 NL80211_NAN_MATCH_FUNC_LOCAL,7191 NL80211_NAN_MATCH_FUNC_PEER,7192 7193 /* keep last */7194 NUM_NL80211_NAN_MATCH_ATTR,7195 NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 17196};7197 7198/**7199 * enum nl80211_external_auth_action - Action to perform with external7200 * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.7201 * @NL80211_EXTERNAL_AUTH_START: Start the authentication.7202 * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.7203 */7204enum nl80211_external_auth_action {7205 NL80211_EXTERNAL_AUTH_START,7206 NL80211_EXTERNAL_AUTH_ABORT,7207};7208 7209/**7210 * enum nl80211_ftm_responder_attributes - fine timing measurement7211 * responder attributes7212 * @__NL80211_FTM_RESP_ATTR_INVALID: Invalid7213 * @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled7214 * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element7215 * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10),7216 * i.e. starting with the measurement token7217 * @NL80211_FTM_RESP_ATTR_CIVICLOC: The content of Measurement Report Element7218 * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13),7219 * i.e. starting with the measurement token7220 * @__NL80211_FTM_RESP_ATTR_LAST: Internal7221 * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute.7222 */7223enum nl80211_ftm_responder_attributes {7224 __NL80211_FTM_RESP_ATTR_INVALID,7225 7226 NL80211_FTM_RESP_ATTR_ENABLED,7227 NL80211_FTM_RESP_ATTR_LCI,7228 NL80211_FTM_RESP_ATTR_CIVICLOC,7229 7230 /* keep last */7231 __NL80211_FTM_RESP_ATTR_LAST,7232 NL80211_FTM_RESP_ATTR_MAX = __NL80211_FTM_RESP_ATTR_LAST - 1,7233};7234 7235/*7236 * enum nl80211_ftm_responder_stats - FTM responder statistics7237 *7238 * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS7239 * when getting FTM responder statistics.7240 *7241 * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved7242 * @NL80211_FTM_STATS_SUCCESS_NUM: number of FTM sessions in which all frames7243 * were ssfully answered (u32)7244 * @NL80211_FTM_STATS_PARTIAL_NUM: number of FTM sessions in which part of the7245 * frames were successfully answered (u32)7246 * @NL80211_FTM_STATS_FAILED_NUM: number of failed FTM sessions (u32)7247 * @NL80211_FTM_STATS_ASAP_NUM: number of ASAP sessions (u32)7248 * @NL80211_FTM_STATS_NON_ASAP_NUM: number of non-ASAP sessions (u32)7249 * @NL80211_FTM_STATS_TOTAL_DURATION_MSEC: total sessions durations - gives an7250 * indication of how much time the responder was busy (u64, msec)7251 * @NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM: number of unknown FTM triggers -7252 * triggers from initiators that didn't finish successfully the negotiation7253 * phase with the responder (u32)7254 * @NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM: number of FTM reschedule requests7255 * - initiator asks for a new scheduling although it already has scheduled7256 * FTM slot (u32)7257 * @NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM: number of FTM triggers out of7258 * scheduled window (u32)7259 * @NL80211_FTM_STATS_PAD: used for padding, ignore7260 * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal7261 * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute7262 */7263enum nl80211_ftm_responder_stats {7264 __NL80211_FTM_STATS_INVALID,7265 NL80211_FTM_STATS_SUCCESS_NUM,7266 NL80211_FTM_STATS_PARTIAL_NUM,7267 NL80211_FTM_STATS_FAILED_NUM,7268 NL80211_FTM_STATS_ASAP_NUM,7269 NL80211_FTM_STATS_NON_ASAP_NUM,7270 NL80211_FTM_STATS_TOTAL_DURATION_MSEC,7271 NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM,7272 NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM,7273 NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM,7274 NL80211_FTM_STATS_PAD,7275 7276 /* keep last */7277 __NL80211_FTM_STATS_AFTER_LAST,7278 NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 17279};7280 7281/**7282 * enum nl80211_preamble - frame preamble types7283 * @NL80211_PREAMBLE_LEGACY: legacy (HR/DSSS, OFDM, ERP PHY) preamble7284 * @NL80211_PREAMBLE_HT: HT preamble7285 * @NL80211_PREAMBLE_VHT: VHT preamble7286 * @NL80211_PREAMBLE_DMG: DMG preamble7287 * @NL80211_PREAMBLE_HE: HE preamble7288 */7289enum nl80211_preamble {7290 NL80211_PREAMBLE_LEGACY,7291 NL80211_PREAMBLE_HT,7292 NL80211_PREAMBLE_VHT,7293 NL80211_PREAMBLE_DMG,7294 NL80211_PREAMBLE_HE,7295};7296 7297/**7298 * enum nl80211_peer_measurement_type - peer measurement types7299 * @NL80211_PMSR_TYPE_INVALID: invalid/unused, needed as we use7300 * these numbers also for attributes7301 *7302 * @NL80211_PMSR_TYPE_FTM: flight time measurement7303 *7304 * @NUM_NL80211_PMSR_TYPES: internal7305 * @NL80211_PMSR_TYPE_MAX: highest type number7306 */7307enum nl80211_peer_measurement_type {7308 NL80211_PMSR_TYPE_INVALID,7309 7310 NL80211_PMSR_TYPE_FTM,7311 7312 NUM_NL80211_PMSR_TYPES,7313 NL80211_PMSR_TYPE_MAX = NUM_NL80211_PMSR_TYPES - 17314};7315 7316/**7317 * enum nl80211_peer_measurement_status - peer measurement status7318 * @NL80211_PMSR_STATUS_SUCCESS: measurement completed successfully7319 * @NL80211_PMSR_STATUS_REFUSED: measurement was locally refused7320 * @NL80211_PMSR_STATUS_TIMEOUT: measurement timed out7321 * @NL80211_PMSR_STATUS_FAILURE: measurement failed, a type-dependent7322 * reason may be available in the response data7323 */7324enum nl80211_peer_measurement_status {7325 NL80211_PMSR_STATUS_SUCCESS,7326 NL80211_PMSR_STATUS_REFUSED,7327 NL80211_PMSR_STATUS_TIMEOUT,7328 NL80211_PMSR_STATUS_FAILURE,7329};7330 7331/**7332 * enum nl80211_peer_measurement_req - peer measurement request attributes7333 * @__NL80211_PMSR_REQ_ATTR_INVALID: invalid7334 *7335 * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement7336 * type-specific request data inside. The attributes used are from the7337 * enums named nl80211_peer_measurement_<type>_req.7338 * @NL80211_PMSR_REQ_ATTR_GET_AP_TSF: include AP TSF timestamp, if supported7339 * (flag attribute)7340 *7341 * @NUM_NL80211_PMSR_REQ_ATTRS: internal7342 * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number7343 */7344enum nl80211_peer_measurement_req {7345 __NL80211_PMSR_REQ_ATTR_INVALID,7346 7347 NL80211_PMSR_REQ_ATTR_DATA,7348 NL80211_PMSR_REQ_ATTR_GET_AP_TSF,7349 7350 /* keep last */7351 NUM_NL80211_PMSR_REQ_ATTRS,7352 NL80211_PMSR_REQ_ATTR_MAX = NUM_NL80211_PMSR_REQ_ATTRS - 17353};7354 7355/**7356 * enum nl80211_peer_measurement_resp - peer measurement response attributes7357 * @__NL80211_PMSR_RESP_ATTR_INVALID: invalid7358 *7359 * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement7360 * type-specific results inside. The attributes used are from the enums7361 * named nl80211_peer_measurement_<type>_resp.7362 * @NL80211_PMSR_RESP_ATTR_STATUS: u32 value with the measurement status7363 * (using values from &enum nl80211_peer_measurement_status.)7364 * @NL80211_PMSR_RESP_ATTR_HOST_TIME: host time (%CLOCK_BOOTTIME) when the7365 * result was measured; this value is not expected to be accurate to7366 * more than 20ms. (u64, nanoseconds)7367 * @NL80211_PMSR_RESP_ATTR_AP_TSF: TSF of the AP that the interface7368 * doing the measurement is connected to when the result was measured.7369 * This shall be accurately reported if supported and requested7370 * (u64, usec)7371 * @NL80211_PMSR_RESP_ATTR_FINAL: If results are sent to the host partially7372 * (*e.g. with FTM per-burst data) this flag will be cleared on all but7373 * the last result; if all results are combined it's set on the single7374 * result.7375 * @NL80211_PMSR_RESP_ATTR_PAD: padding for 64-bit attributes, ignore7376 *7377 * @NUM_NL80211_PMSR_RESP_ATTRS: internal7378 * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number7379 */7380enum nl80211_peer_measurement_resp {7381 __NL80211_PMSR_RESP_ATTR_INVALID,7382 7383 NL80211_PMSR_RESP_ATTR_DATA,7384 NL80211_PMSR_RESP_ATTR_STATUS,7385 NL80211_PMSR_RESP_ATTR_HOST_TIME,7386 NL80211_PMSR_RESP_ATTR_AP_TSF,7387 NL80211_PMSR_RESP_ATTR_FINAL,7388 NL80211_PMSR_RESP_ATTR_PAD,7389 7390 /* keep last */7391 NUM_NL80211_PMSR_RESP_ATTRS,7392 NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 17393};7394 7395/**7396 * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement7397 * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid7398 *7399 * @NL80211_PMSR_PEER_ATTR_ADDR: peer's MAC address7400 * @NL80211_PMSR_PEER_ATTR_CHAN: channel definition, nested, using top-level7401 * attributes like %NL80211_ATTR_WIPHY_FREQ etc.7402 * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by7403 * measurement type, with attributes from the7404 * &enum nl80211_peer_measurement_req inside.7405 * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by7406 * measurement type, with attributes from the7407 * &enum nl80211_peer_measurement_resp inside.7408 *7409 * @NUM_NL80211_PMSR_PEER_ATTRS: internal7410 * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number7411 */7412enum nl80211_peer_measurement_peer_attrs {7413 __NL80211_PMSR_PEER_ATTR_INVALID,7414 7415 NL80211_PMSR_PEER_ATTR_ADDR,7416 NL80211_PMSR_PEER_ATTR_CHAN,7417 NL80211_PMSR_PEER_ATTR_REQ,7418 NL80211_PMSR_PEER_ATTR_RESP,7419 7420 /* keep last */7421 NUM_NL80211_PMSR_PEER_ATTRS,7422 NL80211_PMSR_PEER_ATTR_MAX = NUM_NL80211_PMSR_PEER_ATTRS - 1,7423};7424 7425/**7426 * enum nl80211_peer_measurement_attrs - peer measurement attributes7427 * @__NL80211_PMSR_ATTR_INVALID: invalid7428 *7429 * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability7430 * advertisement only, indicates the maximum number of peers7431 * measurements can be done with in a single request7432 * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability7433 * indicating that the connected AP's TSF can be reported in7434 * measurement results7435 * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability7436 * indicating that MAC address randomization is supported.7437 * @NL80211_PMSR_ATTR_TYPE_CAPA: capabilities reported by the device,7438 * this contains a nesting indexed by measurement type, and7439 * type-specific capabilities inside, which are from the enums7440 * named nl80211_peer_measurement_<type>_capa.7441 * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is7442 * meaningless, just a list of peers to measure with, with the7443 * sub-attributes taken from7444 * &enum nl80211_peer_measurement_peer_attrs.7445 *7446 * @NUM_NL80211_PMSR_ATTR: internal7447 * @NL80211_PMSR_ATTR_MAX: highest attribute number7448 */7449enum nl80211_peer_measurement_attrs {7450 __NL80211_PMSR_ATTR_INVALID,7451 7452 NL80211_PMSR_ATTR_MAX_PEERS,7453 NL80211_PMSR_ATTR_REPORT_AP_TSF,7454 NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR,7455 NL80211_PMSR_ATTR_TYPE_CAPA,7456 NL80211_PMSR_ATTR_PEERS,7457 7458 /* keep last */7459 NUM_NL80211_PMSR_ATTR,7460 NL80211_PMSR_ATTR_MAX = NUM_NL80211_PMSR_ATTR - 17461};7462 7463/**7464 * enum nl80211_peer_measurement_ftm_capa - FTM capabilities7465 * @__NL80211_PMSR_FTM_CAPA_ATTR_INVALID: invalid7466 *7467 * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode7468 * is supported7469 * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP7470 * mode is supported7471 * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI7472 * data can be requested during the measurement7473 * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic7474 * location data can be requested during the measurement7475 * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits7476 * from &enum nl80211_preamble.7477 * @NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS: bitmap of values from7478 * &enum nl80211_chan_width indicating the supported channel7479 * bandwidths for FTM. Note that a higher channel bandwidth may be7480 * configured to allow for other measurements types with different7481 * bandwidth requirement in the same measurement.7482 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating7483 * the maximum bursts exponent that can be used (if not present anything7484 * is valid)7485 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating7486 * the maximum FTMs per burst (if not present anything is valid)7487 * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if7488 * trigger based ranging measurement is supported7489 * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating7490 * if non-trigger-based ranging measurement is supported7491 *7492 * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal7493 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number7494 */7495enum nl80211_peer_measurement_ftm_capa {7496 __NL80211_PMSR_FTM_CAPA_ATTR_INVALID,7497 7498 NL80211_PMSR_FTM_CAPA_ATTR_ASAP,7499 NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP,7500 NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI,7501 NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC,7502 NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES,7503 NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS,7504 NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT,7505 NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST,7506 NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED,7507 NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED,7508 7509 /* keep last */7510 NUM_NL80211_PMSR_FTM_CAPA_ATTR,7511 NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 17512};7513 7514/**7515 * enum nl80211_peer_measurement_ftm_req - FTM request attributes7516 * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid7517 *7518 * @NL80211_PMSR_FTM_REQ_ATTR_ASAP: ASAP mode requested (flag)7519 * @NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE: preamble type (see7520 * &enum nl80211_preamble), optional for DMG (u32)7521 * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in7522 * 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element"7523 * (u8, 0-15, optional with default 15 i.e. "no preference")7524 * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units7525 * of 100ms (u16, optional with default 0)7526 * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-20167527 * Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with7528 * default 15 i.e. "no preference")7529 * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames7530 * requested per burst7531 * (u8, 0-31, optional with default 0 i.e. "no preference")7532 * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries7533 * (u8, default 3)7534 * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag)7535 * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data7536 * (flag)7537 * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging7538 * measurement (flag).7539 * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are7540 * mutually exclusive.7541 * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor7542 * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based7543 * ranging will be used.7544 * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non-trigger-based7545 * ranging measurement (flag)7546 * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are7547 * mutually exclusive.7548 * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor7549 * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based7550 * ranging will be used.7551 * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only7552 * valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or7553 * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.7554 * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the7555 * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED7556 * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set.7557 *7558 * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal7559 * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number7560 */7561enum nl80211_peer_measurement_ftm_req {7562 __NL80211_PMSR_FTM_REQ_ATTR_INVALID,7563 7564 NL80211_PMSR_FTM_REQ_ATTR_ASAP,7565 NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE,7566 NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP,7567 NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD,7568 NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION,7569 NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST,7570 NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES,7571 NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI,7572 NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,7573 NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,7574 NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,7575 NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,7576 NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR,7577 7578 /* keep last */7579 NUM_NL80211_PMSR_FTM_REQ_ATTR,7580 NL80211_PMSR_FTM_REQ_ATTR_MAX = NUM_NL80211_PMSR_FTM_REQ_ATTR - 17581};7582 7583/**7584 * enum nl80211_peer_measurement_ftm_failure_reasons - FTM failure reasons7585 * @NL80211_PMSR_FTM_FAILURE_UNSPECIFIED: unspecified failure, not used7586 * @NL80211_PMSR_FTM_FAILURE_NO_RESPONSE: no response from the FTM responder7587 * @NL80211_PMSR_FTM_FAILURE_REJECTED: FTM responder rejected measurement7588 * @NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL: we already know the peer is7589 * on a different channel, so can't measure (if we didn't know, we'd7590 * try and get no response)7591 * @NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE: peer can't actually do FTM7592 * @NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP: invalid T1/T4 timestamps7593 * received7594 * @NL80211_PMSR_FTM_FAILURE_PEER_BUSY: peer reports busy, you may retry7595 * later (see %NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME)7596 * @NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS: parameters were changed7597 * by the peer and are no longer supported7598 */7599enum nl80211_peer_measurement_ftm_failure_reasons {7600 NL80211_PMSR_FTM_FAILURE_UNSPECIFIED,7601 NL80211_PMSR_FTM_FAILURE_NO_RESPONSE,7602 NL80211_PMSR_FTM_FAILURE_REJECTED,7603 NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL,7604 NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE,7605 NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP,7606 NL80211_PMSR_FTM_FAILURE_PEER_BUSY,7607 NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS,7608};7609 7610/**7611 * enum nl80211_peer_measurement_ftm_resp - FTM response attributes7612 * @__NL80211_PMSR_FTM_RESP_ATTR_INVALID: invalid7613 *7614 * @NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON: FTM-specific failure reason7615 * (u32, optional)7616 * @NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX: optional, if bursts are reported7617 * as separate results then it will be the burst index 0...(N-1) and7618 * the top level will indicate partial results (u32)7619 * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames7620 * transmitted (u32, optional)7621 * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames7622 * that were acknowledged (u32, optional)7623 * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the7624 * busy peer (u32, seconds)7625 * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent7626 * used by the responder (similar to request, u8)7627 * @NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION: actual burst duration used by7628 * the responder (similar to request, u8)7629 * @NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST: actual FTMs per burst used7630 * by the responder (similar to request, u8)7631 * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG: average RSSI across all FTM action7632 * frames (optional, s32, 1/2 dBm)7633 * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD: RSSI spread across all FTM action7634 * frames (optional, s32, 1/2 dBm)7635 * @NL80211_PMSR_FTM_RESP_ATTR_TX_RATE: bitrate we used for the response to the7636 * FTM action frame (optional, nested, using &enum nl80211_rate_info7637 * attributes)7638 * @NL80211_PMSR_FTM_RESP_ATTR_RX_RATE: bitrate the responder used for the FTM7639 * action frame (optional, nested, using &enum nl80211_rate_info attrs)7640 * @NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG: average RTT (s64, picoseconds, optional7641 * but one of RTT/DIST must be present)7642 * @NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE: RTT variance (u64, ps^2, note that7643 * standard deviation is the square root of variance, optional)7644 * @NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD: RTT spread (u64, picoseconds,7645 * optional)7646 * @NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG: average distance (s64, mm, optional7647 * but one of RTT/DIST must be present)7648 * @NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE: distance variance (u64, mm^2, note7649 * that standard deviation is the square root of variance, optional)7650 * @NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD: distance spread (u64, mm, optional)7651 * @NL80211_PMSR_FTM_RESP_ATTR_LCI: LCI data from peer (binary, optional);7652 * this is the contents of the Measurement Report Element (802.11-20167653 * 9.4.2.22.1) starting with the Measurement Token, with Measurement7654 * Type 8.7655 * @NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC: civic location data from peer7656 * (binary, optional);7657 * this is the contents of the Measurement Report Element (802.11-20167658 * 9.4.2.22.1) starting with the Measurement Token, with Measurement7659 * Type 11.7660 * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only7661 *7662 * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal7663 * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number7664 */7665enum nl80211_peer_measurement_ftm_resp {7666 __NL80211_PMSR_FTM_RESP_ATTR_INVALID,7667 7668 NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON,7669 NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX,7670 NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS,7671 NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES,7672 NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME,7673 NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP,7674 NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION,7675 NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST,7676 NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG,7677 NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD,7678 NL80211_PMSR_FTM_RESP_ATTR_TX_RATE,7679 NL80211_PMSR_FTM_RESP_ATTR_RX_RATE,7680 NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG,7681 NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE,7682 NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD,7683 NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG,7684 NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE,7685 NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD,7686 NL80211_PMSR_FTM_RESP_ATTR_LCI,7687 NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC,7688 NL80211_PMSR_FTM_RESP_ATTR_PAD,7689 7690 /* keep last */7691 NUM_NL80211_PMSR_FTM_RESP_ATTR,7692 NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 17693};7694 7695/**7696 * enum nl80211_obss_pd_attributes - OBSS packet detection attributes7697 * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid7698 *7699 * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset.7700 * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset.7701 * @NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET: the non-SRG OBSS PD maximum7702 * tx power offset.7703 * @NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP: bitmap that indicates the BSS color7704 * values used by members of the SRG.7705 * @NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP: bitmap that indicates the partial7706 * BSSID values used by members of the SRG.7707 * @NL80211_HE_OBSS_PD_ATTR_SR_CTRL: The SR Control field of SRP element.7708 *7709 * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal7710 * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.7711 */7712enum nl80211_obss_pd_attributes {7713 __NL80211_HE_OBSS_PD_ATTR_INVALID,7714 7715 NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET,7716 NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET,7717 NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET,7718 NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP,7719 NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP,7720 NL80211_HE_OBSS_PD_ATTR_SR_CTRL,7721 7722 /* keep last */7723 __NL80211_HE_OBSS_PD_ATTR_LAST,7724 NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1,7725};7726 7727/**7728 * enum nl80211_bss_color_attributes - BSS Color attributes7729 * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid7730 *7731 * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color.7732 * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled.7733 * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used..7734 *7735 * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal7736 * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute.7737 */7738enum nl80211_bss_color_attributes {7739 __NL80211_HE_BSS_COLOR_ATTR_INVALID,7740 7741 NL80211_HE_BSS_COLOR_ATTR_COLOR,7742 NL80211_HE_BSS_COLOR_ATTR_DISABLED,7743 NL80211_HE_BSS_COLOR_ATTR_PARTIAL,7744 7745 /* keep last */7746 __NL80211_HE_BSS_COLOR_ATTR_LAST,7747 NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1,7748};7749 7750/**7751 * enum nl80211_iftype_akm_attributes - interface type AKM attributes7752 * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid7753 *7754 * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag7755 * attribute for each interface type that supports AKM suites specified in7756 * %NL80211_IFTYPE_AKM_ATTR_SUITES7757 * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported7758 * AKM suites for the specified interface types.7759 *7760 * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal7761 * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute.7762 */7763enum nl80211_iftype_akm_attributes {7764 __NL80211_IFTYPE_AKM_ATTR_INVALID,7765 7766 NL80211_IFTYPE_AKM_ATTR_IFTYPES,7767 NL80211_IFTYPE_AKM_ATTR_SUITES,7768 7769 /* keep last */7770 __NL80211_IFTYPE_AKM_ATTR_LAST,7771 NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1,7772};7773 7774/**7775 * enum nl80211_fils_discovery_attributes - FILS discovery configuration7776 * from IEEE Std 802.11ai-2016, Annex C.3 MIB detail.7777 *7778 * @__NL80211_FILS_DISCOVERY_ATTR_INVALID: Invalid7779 *7780 * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU).7781 * Allowed range: 0..10000 (TU = Time Unit)7782 * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU).7783 * Allowed range: 0..10000 (TU = Time Unit). If set to 0, the feature is disabled.7784 * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action7785 * frame including the headers.7786 *7787 * @__NL80211_FILS_DISCOVERY_ATTR_LAST: Internal7788 * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute7789 */7790enum nl80211_fils_discovery_attributes {7791 __NL80211_FILS_DISCOVERY_ATTR_INVALID,7792 7793 NL80211_FILS_DISCOVERY_ATTR_INT_MIN,7794 NL80211_FILS_DISCOVERY_ATTR_INT_MAX,7795 NL80211_FILS_DISCOVERY_ATTR_TMPL,7796 7797 /* keep last */7798 __NL80211_FILS_DISCOVERY_ATTR_LAST,7799 NL80211_FILS_DISCOVERY_ATTR_MAX = __NL80211_FILS_DISCOVERY_ATTR_LAST - 17800};7801 7802/*7803 * FILS discovery template minimum length with action frame headers and7804 * mandatory fields.7805 */7806#define NL80211_FILS_DISCOVERY_TMPL_MIN_LEN 427807 7808/**7809 * enum nl80211_unsol_bcast_probe_resp_attributes - Unsolicited broadcast probe7810 * response configuration. Applicable only in 6GHz.7811 *7812 * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID: Invalid7813 *7814 * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU).7815 * Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.07816 * 26.17.2.3.2 (AP behavior for fast passive scanning). If set to 0, the feature is7817 * disabled.7818 * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response7819 * frame template (binary).7820 *7821 * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST: Internal7822 * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute7823 */7824enum nl80211_unsol_bcast_probe_resp_attributes {7825 __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID,7826 7827 NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT,7828 NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL,7829 7830 /* keep last */7831 __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST,7832 NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =7833 __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 17834};7835 7836/**7837 * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE7838 * derivation. Applicable only when WPA3-Personal SAE authentication is7839 * used.7840 *7841 * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that7842 * attribute is not present from userspace.7843 * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only7844 * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only7845 * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element7846 * can be used.7847 */7848enum nl80211_sae_pwe_mechanism {7849 NL80211_SAE_PWE_UNSPECIFIED,7850 NL80211_SAE_PWE_HUNT_AND_PECK,7851 NL80211_SAE_PWE_HASH_TO_ELEMENT,7852 NL80211_SAE_PWE_BOTH,7853};7854 7855/**7856 * enum nl80211_sar_type - type of SAR specs7857 *7858 * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit7859 *7860 * @NUM_NL80211_SAR_TYPE: internal7861 */7862enum nl80211_sar_type {7863 NL80211_SAR_TYPE_POWER,7864 7865 /* add new type here */7866 7867 /* Keep last */7868 NUM_NL80211_SAR_TYPE,7869};7870 7871/**7872 * enum nl80211_sar_attrs - Attributes for SAR spec7873 *7874 * @__NL80211_SAR_ATTR_INVALID: Invalid7875 *7876 * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.7877 *7878 * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power7879 * limit specifications. Each specification contains a set7880 * of %nl80211_sar_specs_attrs.7881 *7882 * For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER7883 * and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX.7884 *7885 * For sar_capa dump, it contains array of7886 * %NL80211_SAR_ATTR_SPECS_START_FREQ7887 * and %NL80211_SAR_ATTR_SPECS_END_FREQ.7888 *7889 * @__NL80211_SAR_ATTR_LAST: Internal7890 * @NL80211_SAR_ATTR_MAX: highest sar attribute7891 *7892 * These attributes are used with %NL80211_CMD_SET_SAR_SPEC7893 */7894enum nl80211_sar_attrs {7895 __NL80211_SAR_ATTR_INVALID,7896 7897 NL80211_SAR_ATTR_TYPE,7898 NL80211_SAR_ATTR_SPECS,7899 7900 __NL80211_SAR_ATTR_LAST,7901 NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1,7902};7903 7904/**7905 * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs7906 *7907 * @__NL80211_SAR_ATTR_SPECS_INVALID: Invalid7908 *7909 * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual7910 * power limit value in units of 0.25 dBm if type is7911 * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).7912 * 0 means userspace doesn't have SAR limitation on this associated range.7913 *7914 * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the7915 * index of exported freq range table and the associated power limitation7916 * is applied to this range.7917 *7918 * Userspace isn't required to set all the ranges advertised by WLAN driver,7919 * and userspace can skip some certain ranges. These skipped ranges don't7920 * have SAR limitations, and they are same as setting the7921 * %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any7922 * value higher than regulatory allowed value just means SAR power7923 * limitation is removed, but it's required to set at least one range.7924 * It's not allowed to set duplicated range in one SET operation.7925 *7926 * Every SET operation overwrites previous SET operation.7927 *7928 * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start7929 * frequency of this range edge when registering SAR capability to wiphy.7930 * It's not a channel center frequency. The unit is kHz.7931 *7932 * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end7933 * frequency of this range edge when registering SAR capability to wiphy.7934 * It's not a channel center frequency. The unit is kHz.7935 *7936 * @__NL80211_SAR_ATTR_SPECS_LAST: Internal7937 * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute7938 */7939enum nl80211_sar_specs_attrs {7940 __NL80211_SAR_ATTR_SPECS_INVALID,7941 7942 NL80211_SAR_ATTR_SPECS_POWER,7943 NL80211_SAR_ATTR_SPECS_RANGE_INDEX,7944 NL80211_SAR_ATTR_SPECS_START_FREQ,7945 NL80211_SAR_ATTR_SPECS_END_FREQ,7946 7947 __NL80211_SAR_ATTR_SPECS_LAST,7948 NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,7949};7950 7951/**7952 * enum nl80211_mbssid_config_attributes - multiple BSSID (MBSSID) and enhanced7953 * multi-BSSID advertisements (EMA) in AP mode.7954 * Kernel uses some of these attributes to advertise driver's support for7955 * MBSSID and EMA.7956 * Remaining attributes should be used by the userspace to configure the7957 * features.7958 *7959 * @__NL80211_MBSSID_CONFIG_ATTR_INVALID: Invalid7960 *7961 * @NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES: Used by the kernel to advertise7962 * the maximum number of MBSSID interfaces supported by the driver.7963 * Driver should indicate MBSSID support by setting7964 * wiphy->mbssid_max_interfaces to a value more than or equal to 2.7965 *7966 * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel7967 * to advertise the maximum profile periodicity supported by the driver7968 * if EMA is enabled. Driver should indicate EMA support to the userspace7969 * by setting wiphy->ema_max_profile_periodicity to7970 * a non-zero value.7971 *7972 * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of7973 * this BSS (u8) in the multiple BSSID set.7974 * Value must be set to 0 for the transmitting interface and non-zero for7975 * all non-transmitting interfaces. The userspace will be responsible7976 * for using unique indices for the interfaces.7977 * Range: 0 to wiphy->mbssid_max_interfaces-1.7978 *7979 * @NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX: Mandatory parameter for7980 * a non-transmitted profile which provides the interface index (u32) of7981 * the transmitted profile. The value must match one of the interface7982 * indices advertised by the kernel. Optional if the interface being set up7983 * is the transmitting one, however, if provided then the value must match7984 * the interface index of the same.7985 *7986 * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature.7987 * Setting this flag is permitted only if the driver advertises EMA support7988 * by setting wiphy->ema_max_profile_periodicity to non-zero.7989 *7990 * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal7991 * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute7992 */7993enum nl80211_mbssid_config_attributes {7994 __NL80211_MBSSID_CONFIG_ATTR_INVALID,7995 7996 NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES,7997 NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY,7998 NL80211_MBSSID_CONFIG_ATTR_INDEX,7999 NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX,8000 NL80211_MBSSID_CONFIG_ATTR_EMA,8001 8002 /* keep last */8003 __NL80211_MBSSID_CONFIG_ATTR_LAST,8004 NL80211_MBSSID_CONFIG_ATTR_MAX = __NL80211_MBSSID_CONFIG_ATTR_LAST - 1,8005};8006 8007/**8008 * enum nl80211_ap_settings_flags - AP settings flags8009 *8010 * @NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external8011 * authentication.8012 * @NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT: Userspace supports SA Query8013 * procedures offload to driver. If driver advertises8014 * %NL80211_AP_SME_SA_QUERY_OFFLOAD in AP SME features, userspace shall8015 * ignore SA Query procedures and validations when this flag is set by8016 * userspace.8017 */8018enum nl80211_ap_settings_flags {8019 NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT = 1 << 0,8020 NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1,8021};8022 8023/**8024 * enum nl80211_wiphy_radio_attrs - wiphy radio attributes8025 *8026 * @__NL80211_WIPHY_RADIO_ATTR_INVALID: Invalid8027 *8028 * @NL80211_WIPHY_RADIO_ATTR_INDEX: Index of this radio (u32)8029 * @NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE: Frequency range supported by this8030 * radio. Attribute may be present multiple times.8031 * @NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION: Supported interface8032 * combination for this radio. Attribute may be present multiple times8033 * and contains attributes defined in &enum nl80211_if_combination_attrs.8034 *8035 * @__NL80211_WIPHY_RADIO_ATTR_LAST: Internal8036 * @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute8037 */8038enum nl80211_wiphy_radio_attrs {8039 __NL80211_WIPHY_RADIO_ATTR_INVALID,8040 8041 NL80211_WIPHY_RADIO_ATTR_INDEX,8042 NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE,8043 NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION,8044 8045 /* keep last */8046 __NL80211_WIPHY_RADIO_ATTR_LAST,8047 NL80211_WIPHY_RADIO_ATTR_MAX = __NL80211_WIPHY_RADIO_ATTR_LAST - 1,8048};8049 8050/**8051 * enum nl80211_wiphy_radio_freq_range - wiphy radio frequency range8052 *8053 * @__NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID: Invalid8054 *8055 * @NL80211_WIPHY_RADIO_FREQ_ATTR_START: Frequency range start (u32).8056 * The unit is kHz.8057 * @NL80211_WIPHY_RADIO_FREQ_ATTR_END: Frequency range end (u32).8058 * The unit is kHz.8059 *8060 * @__NL80211_WIPHY_RADIO_FREQ_ATTR_LAST: Internal8061 * @NL80211_WIPHY_RADIO_FREQ_ATTR_MAX: Highest attribute8062 */8063enum nl80211_wiphy_radio_freq_range {8064 __NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID,8065 8066 NL80211_WIPHY_RADIO_FREQ_ATTR_START,8067 NL80211_WIPHY_RADIO_FREQ_ATTR_END,8068 8069 __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST,8070 NL80211_WIPHY_RADIO_FREQ_ATTR_MAX = __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST - 1,8071};8072 8073#endif /* __LINUX_NL80211_H */8074