brintos

brintos / linux-shallow public Read only

0
0
Text · 4.3 KiB · ae638a1 Raw
101 lines · c
1/* SPDX-License-Identifier: GPL-2.0 */2#ifndef __ASM_ARCH_REGS_AC97_H3#define __ASM_ARCH_REGS_AC97_H4 5/*6 * AC97 Controller registers7 */8 9#define POCR		(0x0000)  	/* PCM Out Control Register */10#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */11#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */12 13#define PICR		(0x0004) 	/* PCM In Control Register */14#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */15#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */16 17#define MCCR		(0x0008)  	/* Mic In Control Register */18#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */19#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */20 21#define GCR		(0x000C) 	 /* Global Control Register */22#ifdef CONFIG_PXA3xx23#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */24#endif25#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */26#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */27#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */28#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */29#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */30#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */31#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */32#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */33#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */34#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */35#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */36 37#define POSR		(0x0010)  	/* PCM Out Status Register */38#define POSR_FIFOE	(1 << 4)	/* FIFO error */39#define POSR_FSR	(1 << 2)	/* FIFO Service Request */40 41#define PISR		(0x0014)  	/* PCM In Status Register */42#define PISR_FIFOE	(1 << 4)	/* FIFO error */43#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */44#define PISR_FSR	(1 << 2)	/* FIFO Service Request */45 46#define MCSR		(0x0018)  	/* Mic In Status Register */47#define MCSR_FIFOE	(1 << 4)	/* FIFO error */48#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */49#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */50 51#define GSR		(0x001C)  	/* Global Status Register */52#define GSR_CDONE	(1 << 19)	/* Command Done */53#define GSR_SDONE	(1 << 18)	/* Status Done */54#define GSR_RDCS	(1 << 15)	/* Read Completion Status */55#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */56#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */57#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */58#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */59#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */60#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */61#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */62#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */63#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */64#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */65#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */66#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */67#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */68#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */69 70#define CAR		(0x0020)  	/* CODEC Access Register */71#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */72 73#define PCDR		(0x0040)  	/* PCM FIFO Data Register */74#define MCDR		(0x0060)  	/* Mic-in FIFO Data Register */75 76#define MOCR		(0x0100)  	/* Modem Out Control Register */77#define MOCR_FEIE	(1 << 3)	/* FIFO Error */78#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */79 80#define MICR		(0x0108)  	/* Modem In Control Register */81#define MICR_FEIE	(1 << 3)	/* FIFO Error */82#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */83 84#define MOSR		(0x0110)  	/* Modem Out Status Register */85#define MOSR_FIFOE	(1 << 4)	/* FIFO error */86#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */87 88#define MISR		(0x0118)  	/* Modem In Status Register */89#define MISR_FIFOE	(1 << 4)	/* FIFO error */90#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */91#define MISR_FSR	(1 << 2)	/* FIFO Service Request */92 93#define MODR		(0x0140)  	/* Modem FIFO Data Register */94 95#define PAC_REG_BASE	(0x0200)  	/* Primary Audio Codec */96#define SAC_REG_BASE	(0x0300)  	/* Secondary Audio Codec */97#define PMC_REG_BASE	(0x0400)  	/* Primary Modem Codec */98#define SMC_REG_BASE	(0x0500)  	/* Secondary Modem Codec */99 100#endif /* __ASM_ARCH_REGS_AC97_H */101