brintos

brintos / linux-shallow public Read only

0
0
Text · 5.5 KiB · 93ff029 Raw
230 lines · c
1// SPDX-License-Identifier: GPL-2.0-or-later2/*3 * cs5530.c - Initialisation code for Cyrix/NatSemi VSA1 softaudio4 *5 * 	(C) Copyright 2007 Ash Willis <ashwillis@programmer.net>6 *	(C) Copyright 2003 Red Hat Inc <alan@lxorguk.ukuu.org.uk>7 *8 * This driver was ported (shamelessly ripped ;) from oss/kahlua.c but I did9 * mess with it a bit. The chip seems to have to have trouble with full duplex10 * mode. If we're recording in 8bit 8000kHz, say, and we then attempt to11 * simultaneously play back audio at 16bit 44100kHz, the device actually plays12 * back in the same format in which it is capturing. By forcing the chip to13 * always play/capture in 16/44100, we can let alsa-lib convert the samples and14 * that way we can hack up some full duplex audio. 15 * 16 * XpressAudio(tm) is used on the Cyrix MediaGX (now NatSemi Geode) systems.17 * The older version (VSA1) provides fairly good soundblaster emulation18 * although there are a couple of bugs: large DMA buffers break record,19 * and the MPU event handling seems suspect. VSA2 allows the native driver20 * to control the AC97 audio engine directly and requires a different driver.21 *22 * Thanks to National Semiconductor for providing the needed information23 * on the XpressAudio(tm) internals.24 *25 * TO DO:26 *	Investigate whether we can portably support Cognac (5520) in the27 *	same manner.28 */29 30#include <linux/delay.h>31#include <linux/module.h>32#include <linux/pci.h>33#include <linux/slab.h>34#include <sound/core.h>35#include <sound/sb.h>36#include <sound/initval.h>37 38MODULE_AUTHOR("Ash Willis");39MODULE_DESCRIPTION("CS5530 Audio");40MODULE_LICENSE("GPL");41 42static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;43static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;44static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;45 46module_param_array(index, int, NULL, 0444);47MODULE_PARM_DESC(index, "Index value for CS5530 Audio driver.");48module_param_array(id, charp, NULL, 0444);49MODULE_PARM_DESC(id, "ID string for CS5530 Audio driver.");50module_param_array(enable, bool, NULL, 0444);51MODULE_PARM_DESC(enable, "Enable CS5530 Audio driver.");52 53struct snd_cs5530 {54	struct snd_card *card;55	struct pci_dev *pci;56	struct snd_sb *sb;57	unsigned long pci_base;58};59 60static const struct pci_device_id snd_cs5530_ids[] = {61	{PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO, PCI_ANY_ID,62							PCI_ANY_ID, 0, 0},63	{0,}64};65 66MODULE_DEVICE_TABLE(pci, snd_cs5530_ids);67 68static u8 snd_cs5530_mixer_read(unsigned long io, u8 reg)69{70	outb(reg, io + 4);71	udelay(20);72	reg = inb(io + 5);73	udelay(20);74	return reg;75}76 77static int snd_cs5530_create(struct snd_card *card,78			     struct pci_dev *pci)79{80	struct snd_cs5530 *chip = card->private_data;81	unsigned long sb_base;82	u8 irq, dma8, dma16 = 0;83	u16 map;84	void __iomem *mem;85	int err;86 87	err = pcim_enable_device(pci);88 	if (err < 0)89		return err;90 91	chip->card = card;92	chip->pci = pci;93 94	err = pcim_iomap_regions(pci, 1 << 0, "CS5530");95	if (err < 0)96		return err;97	chip->pci_base = pci_resource_start(pci, 0);98	mem = pcim_iomap_table(pci)[0];99	map = readw(mem + 0x18);100 101	/* Map bits102		0:1	* 0x20 + 0x200 = sb base103		2	sb enable104		3	adlib enable105		5	MPU enable 0x330106		6	MPU enable 0x300107 108	   The other bits may be used internally so must be masked */109 110	sb_base = 0x220 + 0x20 * (map & 3);111 112	if (map & (1<<2))113		dev_info(card->dev, "XpressAudio at 0x%lx\n", sb_base);114	else {115		dev_err(card->dev, "Could not find XpressAudio!\n");116		return -ENODEV;117	}118 119	if (map & (1<<5))120		dev_info(card->dev, "MPU at 0x300\n");121	else if (map & (1<<6))122		dev_info(card->dev, "MPU at 0x330\n");123 124	irq = snd_cs5530_mixer_read(sb_base, 0x80) & 0x0F;125	dma8 = snd_cs5530_mixer_read(sb_base, 0x81);126 127	if (dma8 & 0x20)128		dma16 = 5;129	else if (dma8 & 0x40)130		dma16 = 6;131	else if (dma8 & 0x80)132		dma16 = 7;133	else {134		dev_err(card->dev, "No 16bit DMA enabled\n");135		return -ENODEV;136	}137 138	if (dma8 & 0x01)139		dma8 = 0;140	else if (dma8 & 02)141		dma8 = 1;142	else if (dma8 & 0x08)143		dma8 = 3;144	else {145		dev_err(card->dev, "No 8bit DMA enabled\n");146		return -ENODEV;147	}148 149	if (irq & 1)150		irq = 9;151	else if (irq & 2)152		irq = 5;153	else if (irq & 4)154		irq = 7;155	else if (irq & 8)156		irq = 10;157	else {158		dev_err(card->dev, "SoundBlaster IRQ not set\n");159		return -ENODEV;160	}161 162	dev_info(card->dev, "IRQ: %d DMA8: %d DMA16: %d\n", irq, dma8, dma16);163 164	err = snd_sbdsp_create(card, sb_base, irq, snd_sb16dsp_interrupt, dma8,165						dma16, SB_HW_CS5530, &chip->sb);166	if (err < 0) {167		dev_err(card->dev, "Could not create SoundBlaster\n");168		return err;169	}170 171	err = snd_sb16dsp_pcm(chip->sb, 0);172	if (err < 0) {173		dev_err(card->dev, "Could not create PCM\n");174		return err;175	}176 177	err = snd_sbmixer_new(chip->sb);178	if (err < 0) {179		dev_err(card->dev, "Could not create Mixer\n");180		return err;181	}182 183	return 0;184}185 186static int snd_cs5530_probe(struct pci_dev *pci,187			    const struct pci_device_id *pci_id)188{189	static int dev;190	struct snd_card *card;191	struct snd_cs5530 *chip;192	int err;193 194	if (dev >= SNDRV_CARDS)195		return -ENODEV;196	if (!enable[dev]) {197		dev++;198		return -ENOENT;199	}200 201	err = snd_devm_card_new(&pci->dev, index[dev], id[dev], THIS_MODULE,202				sizeof(*chip), &card);203	if (err < 0)204		return err;205	chip = card->private_data;206 207	err = snd_cs5530_create(card, pci);208	if (err < 0)209		return err;210 211	strcpy(card->driver, "CS5530");212	strcpy(card->shortname, "CS5530 Audio");213	sprintf(card->longname, "%s at 0x%lx", card->shortname, chip->pci_base);214 215	err = snd_card_register(card);216	if (err < 0)217		return err;218	pci_set_drvdata(pci, card);219	dev++;220	return 0;221}222 223static struct pci_driver cs5530_driver = {224	.name = KBUILD_MODNAME,225	.id_table = snd_cs5530_ids,226	.probe = snd_cs5530_probe,227};228 229module_pci_driver(cs5530_driver);230