753 lines · c
1// SPDX-License-Identifier: GPL-2.0-or-later2/*3 * ALSA driver for ICEnsemble VT1724 (Envy24HT)4 *5 * Lowlevel functions for ONKYO WAVIO SE-90PCI and SE-200PCI6 *7 * Copyright (c) 2007 Shin-ya Okada sh_okada(at)d4.dion.ne.jp8 * (at) -> @9 */ 10 11#include <linux/delay.h>12#include <linux/interrupt.h>13#include <linux/init.h>14#include <linux/slab.h>15#include <sound/core.h>16#include <sound/tlv.h>17 18#include "ice1712.h"19#include "envy24ht.h"20#include "se.h"21 22struct se_spec {23 struct {24 unsigned char ch1, ch2;25 } vol[8];26};27 28/****************************************************************************/29/* ONKYO WAVIO SE-200PCI */30/****************************************************************************/31/*32 * system configuration ICE_EEP2_SYSCONF=0x4b33 * XIN1 49.152MHz34 * not have UART35 * one stereo ADC and a S/PDIF receiver connected36 * four stereo DACs connected37 *38 * AC-Link configuration ICE_EEP2_ACLINK=0x8039 * use I2C, not use AC9740 *41 * I2S converters feature ICE_EEP2_I2S=0x7842 * I2S codec has no volume/mute control feature43 * I2S codec supports 96KHz and 192KHz44 * I2S codec 24bits45 *46 * S/PDIF configuration ICE_EEP2_SPDIF=0xc347 * Enable integrated S/PDIF transmitter48 * internal S/PDIF out implemented49 * S/PDIF is stereo50 * External S/PDIF out implemented51 *52 *53 * ** connected chips **54 *55 * WM874056 * A 2ch-DAC of main outputs.57 * It setuped as I2S mode by wire, so no way to setup from software.58 * The sample-rate are automatically changed. 59 * ML/I2S (28pin) --------+60 * MC/DM1 (27pin) -- 5V |61 * MD/DM0 (26pin) -- GND |62 * MUTEB (25pin) -- NC |63 * MODE (24pin) -- GND |64 * CSBIW (23pin) --------+65 * |66 * RSTB (22pin) --R(1K)-+67 * Probably it reduce the noise from the control line.68 *69 * WM876670 * A 6ch-DAC for surrounds.71 * It's control wire was connected to GPIOxx (3-wire serial interface)72 * ML/I2S (11pin) -- GPIO1873 * MC/IWL (12pin) -- GPIO1774 * MD/DM (13pin) -- GPIO1675 * MUTE (14pin) -- GPIO0176 *77 * WM877678 * A 2ch-ADC(with 10ch-selector) plus 2ch-DAC.79 * It's control wire was connected to SDA/SCLK (2-wire serial interface)80 * MODE (16pin) -- R(1K) -- GND81 * CE (17pin) -- R(1K) -- GND 2-wire mode (address=0x34)82 * DI (18pin) -- SDA83 * CL (19pin) -- SCLK84 *85 *86 * ** output pins and device names **87 *88 * 7.1ch name -- output connector color -- device (-D option)89 *90 * FRONT 2ch -- green -- plughw:0,091 * CENTER(Lch) SUBWOOFER(Rch) -- black -- plughw:0,2,092 * SURROUND 2ch -- orange -- plughw:0,2,193 * SURROUND BACK 2ch -- white -- plughw:0,2,294 *95 */96 97 98/****************************************************************************/99/* WM8740 interface */100/****************************************************************************/101 102static void se200pci_WM8740_init(struct snd_ice1712 *ice)103{104 /* nothing to do */105}106 107 108static void se200pci_WM8740_set_pro_rate(struct snd_ice1712 *ice,109 unsigned int rate)110{111 /* nothing to do */112}113 114 115/****************************************************************************/116/* WM8766 interface */117/****************************************************************************/118 119static void se200pci_WM8766_write(struct snd_ice1712 *ice,120 unsigned int addr, unsigned int data)121{122 unsigned int st;123 unsigned int bits;124 int i;125 const unsigned int DATA = 0x010000;126 const unsigned int CLOCK = 0x020000;127 const unsigned int LOAD = 0x040000;128 const unsigned int ALL_MASK = (DATA | CLOCK | LOAD);129 130 snd_ice1712_save_gpio_status(ice);131 132 st = ((addr & 0x7f) << 9) | (data & 0x1ff);133 snd_ice1712_gpio_set_dir(ice, ice->gpio.direction | ALL_MASK);134 snd_ice1712_gpio_set_mask(ice, ice->gpio.write_mask & ~ALL_MASK);135 bits = snd_ice1712_gpio_read(ice) & ~ALL_MASK;136 137 snd_ice1712_gpio_write(ice, bits);138 for (i = 0; i < 16; i++) {139 udelay(1);140 bits &= ~CLOCK;141 st = (st << 1);142 if (st & 0x10000)143 bits |= DATA;144 else145 bits &= ~DATA;146 147 snd_ice1712_gpio_write(ice, bits);148 149 udelay(1);150 bits |= CLOCK;151 snd_ice1712_gpio_write(ice, bits);152 }153 154 udelay(1);155 bits |= LOAD;156 snd_ice1712_gpio_write(ice, bits);157 158 udelay(1);159 bits |= (DATA | CLOCK);160 snd_ice1712_gpio_write(ice, bits);161 162 snd_ice1712_restore_gpio_status(ice);163}164 165static void se200pci_WM8766_set_volume(struct snd_ice1712 *ice, int ch,166 unsigned int vol1, unsigned int vol2)167{168 switch (ch) {169 case 0:170 se200pci_WM8766_write(ice, 0x000, vol1);171 se200pci_WM8766_write(ice, 0x001, vol2 | 0x100);172 break;173 case 1:174 se200pci_WM8766_write(ice, 0x004, vol1);175 se200pci_WM8766_write(ice, 0x005, vol2 | 0x100);176 break;177 case 2:178 se200pci_WM8766_write(ice, 0x006, vol1);179 se200pci_WM8766_write(ice, 0x007, vol2 | 0x100);180 break;181 }182}183 184static void se200pci_WM8766_init(struct snd_ice1712 *ice)185{186 se200pci_WM8766_write(ice, 0x1f, 0x000); /* RESET ALL */187 udelay(10);188 189 se200pci_WM8766_set_volume(ice, 0, 0, 0); /* volume L=0 R=0 */190 se200pci_WM8766_set_volume(ice, 1, 0, 0); /* volume L=0 R=0 */191 se200pci_WM8766_set_volume(ice, 2, 0, 0); /* volume L=0 R=0 */192 193 se200pci_WM8766_write(ice, 0x03, 0x022); /* serial mode I2S-24bits */194 se200pci_WM8766_write(ice, 0x0a, 0x080); /* MCLK=256fs */195 se200pci_WM8766_write(ice, 0x12, 0x000); /* MDP=0 */196 se200pci_WM8766_write(ice, 0x15, 0x000); /* MDP=0 */197 se200pci_WM8766_write(ice, 0x09, 0x000); /* demp=off mute=off */198 199 se200pci_WM8766_write(ice, 0x02, 0x124); /* ch-assign L=L R=R RESET */200 se200pci_WM8766_write(ice, 0x02, 0x120); /* ch-assign L=L R=R */201}202 203static void se200pci_WM8766_set_pro_rate(struct snd_ice1712 *ice,204 unsigned int rate)205{206 if (rate > 96000)207 se200pci_WM8766_write(ice, 0x0a, 0x000); /* MCLK=128fs */208 else209 se200pci_WM8766_write(ice, 0x0a, 0x080); /* MCLK=256fs */210}211 212 213/****************************************************************************/214/* WM8776 interface */215/****************************************************************************/216 217static void se200pci_WM8776_write(struct snd_ice1712 *ice,218 unsigned int addr, unsigned int data)219{220 unsigned int val;221 222 val = (addr << 9) | data;223 snd_vt1724_write_i2c(ice, 0x34, val >> 8, val & 0xff);224}225 226 227static void se200pci_WM8776_set_output_volume(struct snd_ice1712 *ice,228 unsigned int vol1, unsigned int vol2)229{230 se200pci_WM8776_write(ice, 0x03, vol1);231 se200pci_WM8776_write(ice, 0x04, vol2 | 0x100);232}233 234static void se200pci_WM8776_set_input_volume(struct snd_ice1712 *ice,235 unsigned int vol1, unsigned int vol2)236{237 se200pci_WM8776_write(ice, 0x0e, vol1);238 se200pci_WM8776_write(ice, 0x0f, vol2 | 0x100);239}240 241static const char * const se200pci_sel[] = {242 "LINE-IN", "CD-IN", "MIC-IN", "ALL-MIX", NULL243};244 245static void se200pci_WM8776_set_input_selector(struct snd_ice1712 *ice,246 unsigned int sel)247{248 static const unsigned char vals[] = {249 /* LINE, CD, MIC, ALL, GND */250 0x10, 0x04, 0x08, 0x1c, 0x03251 };252 if (sel > 4)253 sel = 4;254 se200pci_WM8776_write(ice, 0x15, vals[sel]);255}256 257static void se200pci_WM8776_set_afl(struct snd_ice1712 *ice, unsigned int afl)258{259 /* AFL -- After Fader Listening */260 if (afl)261 se200pci_WM8776_write(ice, 0x16, 0x005);262 else263 se200pci_WM8776_write(ice, 0x16, 0x001);264}265 266static const char * const se200pci_agc[] = {267 "Off", "LimiterMode", "ALCMode", NULL268};269 270static void se200pci_WM8776_set_agc(struct snd_ice1712 *ice, unsigned int agc)271{272 /* AGC -- Auto Gain Control of the input */273 switch (agc) {274 case 0:275 se200pci_WM8776_write(ice, 0x11, 0x000); /* Off */276 break;277 case 1:278 se200pci_WM8776_write(ice, 0x10, 0x07b);279 se200pci_WM8776_write(ice, 0x11, 0x100); /* LimiterMode */280 break;281 case 2:282 se200pci_WM8776_write(ice, 0x10, 0x1fb);283 se200pci_WM8776_write(ice, 0x11, 0x100); /* ALCMode */284 break;285 }286}287 288static void se200pci_WM8776_init(struct snd_ice1712 *ice)289{290 int i;291 static const unsigned short default_values[] = {292 0x100, 0x100, 0x100,293 0x100, 0x100, 0x100,294 0x000, 0x090, 0x000, 0x000,295 0x022, 0x022, 0x022,296 0x008, 0x0cf, 0x0cf, 0x07b, 0x000,297 0x032, 0x000, 0x0a6, 0x001, 0x001298 };299 300 se200pci_WM8776_write(ice, 0x17, 0x000); /* reset all */301 /* ADC and DAC interface is I2S 24bits mode */302 /* The sample-rate are automatically changed */303 udelay(10);304 /* BUT my board can not do reset all, so I load all by manually. */305 for (i = 0; i < ARRAY_SIZE(default_values); i++)306 se200pci_WM8776_write(ice, i, default_values[i]);307 308 se200pci_WM8776_set_input_selector(ice, 0);309 se200pci_WM8776_set_afl(ice, 0);310 se200pci_WM8776_set_agc(ice, 0);311 se200pci_WM8776_set_input_volume(ice, 0, 0);312 se200pci_WM8776_set_output_volume(ice, 0, 0);313 314 /* head phone mute and power down */315 se200pci_WM8776_write(ice, 0x00, 0);316 se200pci_WM8776_write(ice, 0x01, 0);317 se200pci_WM8776_write(ice, 0x02, 0x100);318 se200pci_WM8776_write(ice, 0x0d, 0x080);319}320 321static void se200pci_WM8776_set_pro_rate(struct snd_ice1712 *ice,322 unsigned int rate)323{324 /* nothing to do */325}326 327 328/****************************************************************************/329/* runtime interface */330/****************************************************************************/331 332static void se200pci_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate)333{334 se200pci_WM8740_set_pro_rate(ice, rate);335 se200pci_WM8766_set_pro_rate(ice, rate);336 se200pci_WM8776_set_pro_rate(ice, rate);337}338 339struct se200pci_control {340 const char *name;341 enum {342 WM8766,343 WM8776in,344 WM8776out,345 WM8776sel,346 WM8776agc,347 WM8776afl348 } target;349 enum { VOLUME1, VOLUME2, BOOLEAN, ENUM } type;350 int ch;351 const char * const *member;352 const char *comment;353};354 355static const struct se200pci_control se200pci_cont[] = {356 {357 .name = "Front Playback Volume",358 .target = WM8776out,359 .type = VOLUME1,360 .comment = "Front(green)"361 },362 {363 .name = "Side Playback Volume",364 .target = WM8766,365 .type = VOLUME1,366 .ch = 1,367 .comment = "Surround(orange)"368 },369 {370 .name = "Surround Playback Volume",371 .target = WM8766,372 .type = VOLUME1,373 .ch = 2,374 .comment = "SurroundBack(white)"375 },376 {377 .name = "CLFE Playback Volume",378 .target = WM8766,379 .type = VOLUME1,380 .ch = 0,381 .comment = "Center(Lch)&SubWoofer(Rch)(black)"382 },383 {384 .name = "Capture Volume",385 .target = WM8776in,386 .type = VOLUME2387 },388 {389 .name = "Capture Select",390 .target = WM8776sel,391 .type = ENUM,392 .member = se200pci_sel393 },394 {395 .name = "AGC Capture Mode",396 .target = WM8776agc,397 .type = ENUM,398 .member = se200pci_agc399 },400 {401 .name = "AFL Bypass Playback Switch",402 .target = WM8776afl,403 .type = BOOLEAN404 }405};406 407static int se200pci_get_enum_count(int n)408{409 const char * const *member;410 int c;411 412 member = se200pci_cont[n].member;413 if (!member)414 return 0;415 for (c = 0; member[c]; c++)416 ;417 return c;418}419 420static int se200pci_cont_volume_info(struct snd_kcontrol *kc,421 struct snd_ctl_elem_info *uinfo)422{423 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;424 uinfo->count = 2;425 uinfo->value.integer.min = 0; /* mute */426 uinfo->value.integer.max = 0xff; /* 0dB */427 return 0;428}429 430#define se200pci_cont_boolean_info snd_ctl_boolean_mono_info431 432static int se200pci_cont_enum_info(struct snd_kcontrol *kc,433 struct snd_ctl_elem_info *uinfo)434{435 int n, c;436 437 n = kc->private_value;438 c = se200pci_get_enum_count(n);439 if (!c)440 return -EINVAL;441 return snd_ctl_enum_info(uinfo, 1, c, se200pci_cont[n].member);442}443 444static int se200pci_cont_volume_get(struct snd_kcontrol *kc,445 struct snd_ctl_elem_value *uc)446{447 struct snd_ice1712 *ice = snd_kcontrol_chip(kc);448 struct se_spec *spec = ice->spec;449 int n = kc->private_value;450 uc->value.integer.value[0] = spec->vol[n].ch1;451 uc->value.integer.value[1] = spec->vol[n].ch2;452 return 0;453}454 455static int se200pci_cont_boolean_get(struct snd_kcontrol *kc,456 struct snd_ctl_elem_value *uc)457{458 struct snd_ice1712 *ice = snd_kcontrol_chip(kc);459 struct se_spec *spec = ice->spec;460 int n = kc->private_value;461 uc->value.integer.value[0] = spec->vol[n].ch1;462 return 0;463}464 465static int se200pci_cont_enum_get(struct snd_kcontrol *kc,466 struct snd_ctl_elem_value *uc)467{468 struct snd_ice1712 *ice = snd_kcontrol_chip(kc);469 struct se_spec *spec = ice->spec;470 int n = kc->private_value;471 uc->value.enumerated.item[0] = spec->vol[n].ch1;472 return 0;473}474 475static void se200pci_cont_update(struct snd_ice1712 *ice, int n)476{477 struct se_spec *spec = ice->spec;478 switch (se200pci_cont[n].target) {479 case WM8766:480 se200pci_WM8766_set_volume(ice,481 se200pci_cont[n].ch,482 spec->vol[n].ch1,483 spec->vol[n].ch2);484 break;485 486 case WM8776in:487 se200pci_WM8776_set_input_volume(ice,488 spec->vol[n].ch1,489 spec->vol[n].ch2);490 break;491 492 case WM8776out:493 se200pci_WM8776_set_output_volume(ice,494 spec->vol[n].ch1,495 spec->vol[n].ch2);496 break;497 498 case WM8776sel:499 se200pci_WM8776_set_input_selector(ice,500 spec->vol[n].ch1);501 break;502 503 case WM8776agc:504 se200pci_WM8776_set_agc(ice, spec->vol[n].ch1);505 break;506 507 case WM8776afl:508 se200pci_WM8776_set_afl(ice, spec->vol[n].ch1);509 break;510 511 default:512 break;513 }514}515 516static int se200pci_cont_volume_put(struct snd_kcontrol *kc,517 struct snd_ctl_elem_value *uc)518{519 struct snd_ice1712 *ice = snd_kcontrol_chip(kc);520 struct se_spec *spec = ice->spec;521 int n = kc->private_value;522 unsigned int vol1, vol2;523 int changed;524 525 changed = 0;526 vol1 = uc->value.integer.value[0] & 0xff;527 vol2 = uc->value.integer.value[1] & 0xff;528 if (spec->vol[n].ch1 != vol1) {529 spec->vol[n].ch1 = vol1;530 changed = 1;531 }532 if (spec->vol[n].ch2 != vol2) {533 spec->vol[n].ch2 = vol2;534 changed = 1;535 }536 if (changed)537 se200pci_cont_update(ice, n);538 539 return changed;540}541 542static int se200pci_cont_boolean_put(struct snd_kcontrol *kc,543 struct snd_ctl_elem_value *uc)544{545 struct snd_ice1712 *ice = snd_kcontrol_chip(kc);546 struct se_spec *spec = ice->spec;547 int n = kc->private_value;548 unsigned int vol1;549 550 vol1 = !!uc->value.integer.value[0];551 if (spec->vol[n].ch1 != vol1) {552 spec->vol[n].ch1 = vol1;553 se200pci_cont_update(ice, n);554 return 1;555 }556 return 0;557}558 559static int se200pci_cont_enum_put(struct snd_kcontrol *kc,560 struct snd_ctl_elem_value *uc)561{562 struct snd_ice1712 *ice = snd_kcontrol_chip(kc);563 struct se_spec *spec = ice->spec;564 int n = kc->private_value;565 unsigned int vol1;566 567 vol1 = uc->value.enumerated.item[0];568 if (vol1 >= se200pci_get_enum_count(n))569 return -EINVAL;570 if (spec->vol[n].ch1 != vol1) {571 spec->vol[n].ch1 = vol1;572 se200pci_cont_update(ice, n);573 return 1;574 }575 return 0;576}577 578static const DECLARE_TLV_DB_SCALE(db_scale_gain1, -12750, 50, 1);579static const DECLARE_TLV_DB_SCALE(db_scale_gain2, -10350, 50, 1);580 581static int se200pci_add_controls(struct snd_ice1712 *ice)582{583 int i;584 struct snd_kcontrol_new cont;585 int err;586 587 memset(&cont, 0, sizeof(cont));588 cont.iface = SNDRV_CTL_ELEM_IFACE_MIXER;589 for (i = 0; i < ARRAY_SIZE(se200pci_cont); i++) {590 cont.private_value = i;591 cont.name = se200pci_cont[i].name;592 cont.access = SNDRV_CTL_ELEM_ACCESS_READWRITE;593 cont.tlv.p = NULL;594 switch (se200pci_cont[i].type) {595 case VOLUME1:596 case VOLUME2:597 cont.info = se200pci_cont_volume_info;598 cont.get = se200pci_cont_volume_get;599 cont.put = se200pci_cont_volume_put;600 cont.access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;601 if (se200pci_cont[i].type == VOLUME1)602 cont.tlv.p = db_scale_gain1;603 else604 cont.tlv.p = db_scale_gain2;605 break;606 case BOOLEAN:607 cont.info = se200pci_cont_boolean_info;608 cont.get = se200pci_cont_boolean_get;609 cont.put = se200pci_cont_boolean_put;610 break;611 case ENUM:612 cont.info = se200pci_cont_enum_info;613 cont.get = se200pci_cont_enum_get;614 cont.put = se200pci_cont_enum_put;615 break;616 default:617 snd_BUG();618 return -EINVAL;619 }620 err = snd_ctl_add(ice->card, snd_ctl_new1(&cont, ice));621 if (err < 0)622 return err;623 }624 625 return 0;626}627 628 629/****************************************************************************/630/* ONKYO WAVIO SE-90PCI */631/****************************************************************************/632/*633 * system configuration ICE_EEP2_SYSCONF=0x4b634 * AC-Link configuration ICE_EEP2_ACLINK=0x80635 * I2S converters feature ICE_EEP2_I2S=0x78636 * S/PDIF configuration ICE_EEP2_SPDIF=0xc3637 *638 * ** connected chip **639 *640 * WM8716641 * A 2ch-DAC of main outputs.642 * It setuped as I2S mode by wire, so no way to setup from software.643 * ML/I2S (28pin) -- +5V644 * MC/DM1 (27pin) -- GND645 * MC/DM0 (26pin) -- GND646 * MUTEB (25pin) -- open (internal pull-up)647 * MODE (24pin) -- GND648 * CSBIWO (23pin) -- +5V649 *650 */651 652 /* Nothing to do for this chip. */653 654 655/****************************************************************************/656/* probe/initialize/setup */657/****************************************************************************/658 659static int se_init(struct snd_ice1712 *ice)660{661 struct se_spec *spec;662 663 spec = kzalloc(sizeof(*spec), GFP_KERNEL);664 if (!spec)665 return -ENOMEM;666 ice->spec = spec;667 668 if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE90PCI) {669 ice->num_total_dacs = 2;670 ice->num_total_adcs = 0;671 ice->vt1720 = 1;672 return 0;673 674 } else if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE200PCI) {675 ice->num_total_dacs = 8;676 ice->num_total_adcs = 2;677 se200pci_WM8740_init(ice);678 se200pci_WM8766_init(ice);679 se200pci_WM8776_init(ice);680 ice->gpio.set_pro_rate = se200pci_set_pro_rate;681 return 0;682 }683 684 return -ENOENT;685}686 687static int se_add_controls(struct snd_ice1712 *ice)688{689 int err;690 691 err = 0;692 /* nothing to do for VT1724_SUBDEVICE_SE90PCI */693 if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE200PCI)694 err = se200pci_add_controls(ice);695 696 return err;697}698 699 700/****************************************************************************/701/* entry point */702/****************************************************************************/703 704static const unsigned char se200pci_eeprom[] = {705 [ICE_EEP2_SYSCONF] = 0x4b, /* 49.152Hz, spdif-in/ADC, 4DACs */706 [ICE_EEP2_ACLINK] = 0x80, /* I2S */707 [ICE_EEP2_I2S] = 0x78, /* 96k-ok, 24bit, 192k-ok */708 [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */709 710 [ICE_EEP2_GPIO_DIR] = 0x02, /* WM8766 mute 1=output */711 [ICE_EEP2_GPIO_DIR1] = 0x00, /* not used */712 [ICE_EEP2_GPIO_DIR2] = 0x07, /* WM8766 ML/MC/MD 1=output */713 714 [ICE_EEP2_GPIO_MASK] = 0x00, /* 0=writable */715 [ICE_EEP2_GPIO_MASK1] = 0x00, /* 0=writable */716 [ICE_EEP2_GPIO_MASK2] = 0x00, /* 0=writable */717 718 [ICE_EEP2_GPIO_STATE] = 0x00, /* WM8766 mute=0 */719 [ICE_EEP2_GPIO_STATE1] = 0x00, /* not used */720 [ICE_EEP2_GPIO_STATE2] = 0x07, /* WM8766 ML/MC/MD */721};722 723static const unsigned char se90pci_eeprom[] = {724 [ICE_EEP2_SYSCONF] = 0x4b, /* 49.152Hz, spdif-in/ADC, 4DACs */725 [ICE_EEP2_ACLINK] = 0x80, /* I2S */726 [ICE_EEP2_I2S] = 0x78, /* 96k-ok, 24bit, 192k-ok */727 [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */728 729 /* ALL GPIO bits are in input mode */730};731 732struct snd_ice1712_card_info snd_vt1724_se_cards[] = {733 {734 .subvendor = VT1724_SUBDEVICE_SE200PCI,735 .name = "ONKYO SE200PCI",736 .model = "se200pci",737 .chip_init = se_init,738 .build_controls = se_add_controls,739 .eeprom_size = sizeof(se200pci_eeprom),740 .eeprom_data = se200pci_eeprom,741 },742 {743 .subvendor = VT1724_SUBDEVICE_SE90PCI,744 .name = "ONKYO SE90PCI",745 .model = "se90pci",746 .chip_init = se_init,747 .build_controls = se_add_controls,748 .eeprom_size = sizeof(se90pci_eeprom),749 .eeprom_data = se90pci_eeprom,750 },751 {} /*terminator*/752};753