brintos

brintos / linux-shallow public Read only

0
0
Text · 13.4 KiB · 66db059 Raw
460 lines · c
1// SPDX-License-Identifier: GPL-2.02//3// Freescale P1022DS ALSA SoC Machine driver4//5// Author: Timur Tabi <timur@freescale.com>6//7// Copyright 2010 Freescale Semiconductor, Inc.8 9#include <linux/module.h>10#include <linux/fsl/guts.h>11#include <linux/interrupt.h>12#include <linux/of.h>13#include <linux/of_address.h>14#include <linux/slab.h>15#include <sound/soc.h>16 17#include "fsl_dma.h"18#include "fsl_ssi.h"19#include "fsl_utils.h"20 21/* P1022-specific PMUXCR and DMUXCR bit definitions */22 23#define CCSR_GUTS_PMUXCR_UART0_I2C1_MASK	0x0001c00024#define CCSR_GUTS_PMUXCR_UART0_I2C1_UART0_SSI	0x0001000025#define CCSR_GUTS_PMUXCR_UART0_I2C1_SSI		0x0001800026 27#define CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK	0x00000c0028#define CCSR_GUTS_PMUXCR_SSI_DMA_TDM_SSI	0x0000000029 30#define CCSR_GUTS_DMUXCR_PAD	1	/* DMA controller/channel set to pad */31#define CCSR_GUTS_DMUXCR_SSI	2	/* DMA controller/channel set to SSI */32 33/*34 * Set the DMACR register in the GUTS35 *36 * The DMACR register determines the source of initiated transfers for each37 * channel on each DMA controller.  Rather than have a bunch of repetitive38 * macros for the bit patterns, we just have a function that calculates39 * them.40 *41 * guts: Pointer to GUTS structure42 * co: The DMA controller (0 or 1)43 * ch: The channel on the DMA controller (0, 1, 2, or 3)44 * device: The device to set as the target (CCSR_GUTS_DMUXCR_xxx)45 */46static inline void guts_set_dmuxcr(struct ccsr_guts __iomem *guts,47	unsigned int co, unsigned int ch, unsigned int device)48{49	unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));50 51	clrsetbits_be32(&guts->dmuxcr, 3 << shift, device << shift);52}53 54/* There's only one global utilities register */55static phys_addr_t guts_phys;56 57/**58 * machine_data: machine-specific ASoC device data59 *60 * This structure contains data for a single sound platform device on an61 * P1022 DS.  Some of the data is taken from the device tree.62 */63struct machine_data {64	struct snd_soc_dai_link dai[2];65	struct snd_soc_card card;66	unsigned int dai_format;67	unsigned int codec_clk_direction;68	unsigned int cpu_clk_direction;69	unsigned int clk_frequency;70	unsigned int ssi_id;		/* 0 = SSI1, 1 = SSI2, etc */71	unsigned int dma_id[2];		/* 0 = DMA1, 1 = DMA2, etc */72	unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/73	char platform_name[2][DAI_NAME_SIZE]; /* One for each DMA channel */74};75 76/**77 * p1022_ds_machine_probe: initialize the board78 *79 * This function is used to initialize the board-specific hardware.80 *81 * Here we program the DMACR and PMUXCR registers.82 */83static int p1022_ds_machine_probe(struct snd_soc_card *card)84{85	struct machine_data *mdata =86		container_of(card, struct machine_data, card);87	struct ccsr_guts __iomem *guts;88 89	guts = ioremap(guts_phys, sizeof(struct ccsr_guts));90	if (!guts) {91		dev_err(card->dev, "could not map global utilities\n");92		return -ENOMEM;93	}94 95	/* Enable SSI Tx signal */96	clrsetbits_be32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_UART0_I2C1_MASK,97			CCSR_GUTS_PMUXCR_UART0_I2C1_UART0_SSI);98 99	/* Enable SSI Rx signal */100	clrsetbits_be32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK,101			CCSR_GUTS_PMUXCR_SSI_DMA_TDM_SSI);102 103	/* Enable DMA Channel for SSI */104	guts_set_dmuxcr(guts, mdata->dma_id[0], mdata->dma_channel_id[0],105			CCSR_GUTS_DMUXCR_SSI);106 107	guts_set_dmuxcr(guts, mdata->dma_id[1], mdata->dma_channel_id[1],108			CCSR_GUTS_DMUXCR_SSI);109 110	iounmap(guts);111 112	return 0;113}114 115/**116 * p1022_ds_startup: program the board with various hardware parameters117 *118 * This function takes board-specific information, like clock frequencies119 * and serial data formats, and passes that information to the codec and120 * transport drivers.121 */122static int p1022_ds_startup(struct snd_pcm_substream *substream)123{124	struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);125	struct machine_data *mdata =126		container_of(rtd->card, struct machine_data, card);127	struct device *dev = rtd->card->dev;128	int ret = 0;129 130	/* Tell the codec driver what the serial protocol is. */131	ret = snd_soc_dai_set_fmt(snd_soc_rtd_to_codec(rtd, 0), mdata->dai_format);132	if (ret < 0) {133		dev_err(dev, "could not set codec driver audio format\n");134		return ret;135	}136 137	/*138	 * Tell the codec driver what the MCLK frequency is, and whether it's139	 * a slave or master.140	 */141	ret = snd_soc_dai_set_sysclk(snd_soc_rtd_to_codec(rtd, 0), 0, mdata->clk_frequency,142				     mdata->codec_clk_direction);143	if (ret < 0) {144		dev_err(dev, "could not set codec driver clock params\n");145		return ret;146	}147 148	return 0;149}150 151/**152 * p1022_ds_machine_remove: Remove the sound device153 *154 * This function is called to remove the sound device for one SSI.  We155 * de-program the DMACR and PMUXCR register.156 */157static int p1022_ds_machine_remove(struct snd_soc_card *card)158{159	struct machine_data *mdata =160		container_of(card, struct machine_data, card);161	struct ccsr_guts __iomem *guts;162 163	guts = ioremap(guts_phys, sizeof(struct ccsr_guts));164	if (!guts) {165		dev_err(card->dev, "could not map global utilities\n");166		return -ENOMEM;167	}168 169	/* Restore the signal routing */170	clrbits32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_UART0_I2C1_MASK);171	clrbits32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK);172	guts_set_dmuxcr(guts, mdata->dma_id[0], mdata->dma_channel_id[0], 0);173	guts_set_dmuxcr(guts, mdata->dma_id[1], mdata->dma_channel_id[1], 0);174 175	iounmap(guts);176 177	return 0;178}179 180/**181 * p1022_ds_ops: ASoC machine driver operations182 */183static const struct snd_soc_ops p1022_ds_ops = {184	.startup = p1022_ds_startup,185};186 187/**188 * p1022_ds_probe: platform probe function for the machine driver189 *190 * Although this is a machine driver, the SSI node is the "master" node with191 * respect to audio hardware connections.  Therefore, we create a new ASoC192 * device for each new SSI node that has a codec attached.193 */194static int p1022_ds_probe(struct platform_device *pdev)195{196	struct device *dev = pdev->dev.parent;197	/* ssi_pdev is the platform device for the SSI node that probed us */198	struct platform_device *ssi_pdev = to_platform_device(dev);199	struct device_node *np = ssi_pdev->dev.of_node;200	struct device_node *codec_np = NULL;201	struct machine_data *mdata;202	struct snd_soc_dai_link_component *comp;203	int ret;204	const char *sprop;205	const u32 *iprop;206 207	/* Find the codec node for this SSI. */208	codec_np = of_parse_phandle(np, "codec-handle", 0);209	if (!codec_np) {210		dev_err(dev, "could not find codec node\n");211		return -EINVAL;212	}213 214	mdata = kzalloc(sizeof(struct machine_data), GFP_KERNEL);215	if (!mdata) {216		ret = -ENOMEM;217		goto error_put;218	}219 220	comp = devm_kzalloc(&pdev->dev, 6 * sizeof(*comp), GFP_KERNEL);221	if (!comp) {222		ret = -ENOMEM;223		goto error_put;224	}225 226	mdata->dai[0].cpus	= &comp[0];227	mdata->dai[0].codecs	= &comp[1];228	mdata->dai[0].platforms	= &comp[2];229 230	mdata->dai[0].num_cpus		= 1;231	mdata->dai[0].num_codecs	= 1;232	mdata->dai[0].num_platforms	= 1;233 234	mdata->dai[1].cpus	= &comp[3];235	mdata->dai[1].codecs	= &comp[4];236	mdata->dai[1].platforms	= &comp[5];237 238	mdata->dai[1].num_cpus		= 1;239	mdata->dai[1].num_codecs	= 1;240	mdata->dai[1].num_platforms	= 1;241 242 243	mdata->dai[0].cpus->dai_name = dev_name(&ssi_pdev->dev);244	mdata->dai[0].ops = &p1022_ds_ops;245 246	/* ASoC core can match codec with device node */247	mdata->dai[0].codecs->of_node = codec_np;248 249	/* We register two DAIs per SSI, one for playback and the other for250	 * capture.  We support codecs that have separate DAIs for both playback251	 * and capture.252	 */253	memcpy(&mdata->dai[1], &mdata->dai[0], sizeof(struct snd_soc_dai_link));254 255	/* The DAI names from the codec (snd_soc_dai_driver.name) */256	mdata->dai[0].codecs->dai_name = "wm8776-hifi-playback";257	mdata->dai[1].codecs->dai_name = "wm8776-hifi-capture";258 259	/* Get the device ID */260	iprop = of_get_property(np, "cell-index", NULL);261	if (!iprop) {262		dev_err(&pdev->dev, "cell-index property not found\n");263		ret = -EINVAL;264		goto error;265	}266	mdata->ssi_id = be32_to_cpup(iprop);267 268	/* Get the serial format and clock direction. */269	sprop = of_get_property(np, "fsl,mode", NULL);270	if (!sprop) {271		dev_err(&pdev->dev, "fsl,mode property not found\n");272		ret = -EINVAL;273		goto error;274	}275 276	if (strcasecmp(sprop, "i2s-slave") == 0) {277		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |278			SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBP_CFP;279		mdata->codec_clk_direction = SND_SOC_CLOCK_OUT;280		mdata->cpu_clk_direction = SND_SOC_CLOCK_IN;281 282		/* In i2s-slave mode, the codec has its own clock source, so we283		 * need to get the frequency from the device tree and pass it to284		 * the codec driver.285		 */286		iprop = of_get_property(codec_np, "clock-frequency", NULL);287		if (!iprop || !*iprop) {288			dev_err(&pdev->dev, "codec bus-frequency "289				"property is missing or invalid\n");290			ret = -EINVAL;291			goto error;292		}293		mdata->clk_frequency = be32_to_cpup(iprop);294	} else if (strcasecmp(sprop, "i2s-master") == 0) {295		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |296			SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBC_CFC;297		mdata->codec_clk_direction = SND_SOC_CLOCK_IN;298		mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT;299	} else if (strcasecmp(sprop, "lj-slave") == 0) {300		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |301			SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBP_CFP;302		mdata->codec_clk_direction = SND_SOC_CLOCK_OUT;303		mdata->cpu_clk_direction = SND_SOC_CLOCK_IN;304	} else if (strcasecmp(sprop, "lj-master") == 0) {305		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |306			SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBC_CFC;307		mdata->codec_clk_direction = SND_SOC_CLOCK_IN;308		mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT;309	} else if (strcasecmp(sprop, "rj-slave") == 0) {310		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |311			SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBP_CFP;312		mdata->codec_clk_direction = SND_SOC_CLOCK_OUT;313		mdata->cpu_clk_direction = SND_SOC_CLOCK_IN;314	} else if (strcasecmp(sprop, "rj-master") == 0) {315		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |316			SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBC_CFC;317		mdata->codec_clk_direction = SND_SOC_CLOCK_IN;318		mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT;319	} else if (strcasecmp(sprop, "ac97-slave") == 0) {320		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |321			SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBP_CFP;322		mdata->codec_clk_direction = SND_SOC_CLOCK_OUT;323		mdata->cpu_clk_direction = SND_SOC_CLOCK_IN;324	} else if (strcasecmp(sprop, "ac97-master") == 0) {325		mdata->dai_format = SND_SOC_DAIFMT_NB_NF |326			SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBC_CFC;327		mdata->codec_clk_direction = SND_SOC_CLOCK_IN;328		mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT;329	} else {330		dev_err(&pdev->dev,331			"unrecognized fsl,mode property '%s'\n", sprop);332		ret = -EINVAL;333		goto error;334	}335 336	if (!mdata->clk_frequency) {337		dev_err(&pdev->dev, "unknown clock frequency\n");338		ret = -EINVAL;339		goto error;340	}341 342	/* Find the playback DMA channel to use. */343	mdata->dai[0].platforms->name = mdata->platform_name[0];344	ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0],345				       &mdata->dma_channel_id[0],346				       &mdata->dma_id[0]);347	if (ret) {348		dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n");349		goto error;350	}351 352	/* Find the capture DMA channel to use. */353	mdata->dai[1].platforms->name = mdata->platform_name[1];354	ret = fsl_asoc_get_dma_channel(np, "fsl,capture-dma", &mdata->dai[1],355				       &mdata->dma_channel_id[1],356				       &mdata->dma_id[1]);357	if (ret) {358		dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n");359		goto error;360	}361 362	/* Initialize our DAI data structure.  */363	mdata->dai[0].stream_name = "playback";364	mdata->dai[1].stream_name = "capture";365	mdata->dai[0].name = mdata->dai[0].stream_name;366	mdata->dai[1].name = mdata->dai[1].stream_name;367 368	mdata->card.probe = p1022_ds_machine_probe;369	mdata->card.remove = p1022_ds_machine_remove;370	mdata->card.name = pdev->name; /* The platform driver name */371	mdata->card.owner = THIS_MODULE;372	mdata->card.dev = &pdev->dev;373	mdata->card.num_links = 2;374	mdata->card.dai_link = mdata->dai;375 376	/* Register with ASoC */377	ret = snd_soc_register_card(&mdata->card);378	if (ret) {379		dev_err(&pdev->dev, "could not register card\n");380		goto error;381	}382 383	of_node_put(codec_np);384 385	return 0;386 387error:388	kfree(mdata);389error_put:390	of_node_put(codec_np);391	return ret;392}393 394/**395 * p1022_ds_remove: remove the platform device396 *397 * This function is called when the platform device is removed.398 */399static void p1022_ds_remove(struct platform_device *pdev)400{401	struct snd_soc_card *card = platform_get_drvdata(pdev);402	struct machine_data *mdata =403		container_of(card, struct machine_data, card);404 405	snd_soc_unregister_card(card);406	kfree(mdata);407}408 409static struct platform_driver p1022_ds_driver = {410	.probe = p1022_ds_probe,411	.remove = p1022_ds_remove,412	.driver = {413		/*414		 * The name must match 'compatible' property in the device tree,415		 * in lowercase letters.416		 */417		.name = "snd-soc-p1022ds",418	},419};420 421/**422 * p1022_ds_init: machine driver initialization.423 *424 * This function is called when this module is loaded.425 */426static int __init p1022_ds_init(void)427{428	struct device_node *guts_np;429	struct resource res;430 431	/* Get the physical address of the global utilities registers */432	guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");433	if (of_address_to_resource(guts_np, 0, &res)) {434		pr_err("snd-soc-p1022ds: missing/invalid global utils node\n");435		of_node_put(guts_np);436		return -EINVAL;437	}438	guts_phys = res.start;439	of_node_put(guts_np);440 441	return platform_driver_register(&p1022_ds_driver);442}443 444/**445 * p1022_ds_exit: machine driver exit446 *447 * This function is called when this driver is unloaded.448 */449static void __exit p1022_ds_exit(void)450{451	platform_driver_unregister(&p1022_ds_driver);452}453 454module_init(p1022_ds_init);455module_exit(p1022_ds_exit);456 457MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");458MODULE_DESCRIPTION("Freescale P1022 DS ALSA SoC machine driver");459MODULE_LICENSE("GPL v2");460