brintos

brintos / linux-shallow public Read only

0
0
Text · 8.8 KiB · 79476e8 Raw
356 lines · c
1// SPDX-License-Identifier: GPL-2.0+2//3// Speyside audio support4//5// Copyright 2011 Wolfson Microelectronics6 7#include <sound/soc.h>8#include <sound/soc-dapm.h>9#include <sound/jack.h>10#include <linux/gpio.h>11#include <linux/module.h>12 13#include "../codecs/wm8996.h"14#include "../codecs/wm9081.h"15 16#define WM8996_HPSEL_GPIO 21417#define MCLK_AUDIO_RATE (512 * 48000)18 19static int speyside_set_bias_level(struct snd_soc_card *card,20				   struct snd_soc_dapm_context *dapm,21				   enum snd_soc_bias_level level)22{23	struct snd_soc_pcm_runtime *rtd;24	struct snd_soc_dai *codec_dai;25	int ret;26 27	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[1]);28	codec_dai = snd_soc_rtd_to_codec(rtd, 0);29 30	if (dapm->dev != codec_dai->dev)31		return 0;32 33	switch (level) {34	case SND_SOC_BIAS_STANDBY:35		ret = snd_soc_dai_set_sysclk(codec_dai, WM8996_SYSCLK_MCLK2,36					     32768, SND_SOC_CLOCK_IN);37		if (ret < 0)38			return ret;39 40		ret = snd_soc_dai_set_pll(codec_dai, WM8996_FLL_MCLK2,41					  0, 0, 0);42		if (ret < 0) {43			pr_err("Failed to stop FLL\n");44			return ret;45		}46		break;47 48	default:49		break;50	}51 52	return 0;53}54 55static int speyside_set_bias_level_post(struct snd_soc_card *card,56					struct snd_soc_dapm_context *dapm,57					enum snd_soc_bias_level level)58{59	struct snd_soc_pcm_runtime *rtd;60	struct snd_soc_dai *codec_dai;61	int ret;62 63	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[1]);64	codec_dai = snd_soc_rtd_to_codec(rtd, 0);65 66	if (dapm->dev != codec_dai->dev)67		return 0;68 69	switch (level) {70	case SND_SOC_BIAS_PREPARE:71		if (card->dapm.bias_level == SND_SOC_BIAS_STANDBY) {72			ret = snd_soc_dai_set_pll(codec_dai, 0,73						  WM8996_FLL_MCLK2,74						  32768, MCLK_AUDIO_RATE);75			if (ret < 0) {76				pr_err("Failed to start FLL\n");77				return ret;78			}79 80			ret = snd_soc_dai_set_sysclk(codec_dai,81						     WM8996_SYSCLK_FLL,82						     MCLK_AUDIO_RATE,83						     SND_SOC_CLOCK_IN);84			if (ret < 0)85				return ret;86		}87		break;88 89	default:90		break;91	}92 93	card->dapm.bias_level = level;94 95	return 0;96}97 98static struct snd_soc_jack speyside_headset;99 100/* Headset jack detection DAPM pins */101static struct snd_soc_jack_pin speyside_headset_pins[] = {102	{103		.pin = "Headset Mic",104		.mask = SND_JACK_MICROPHONE,105	},106};107 108/* Default the headphone selection to active high */109static int speyside_jack_polarity;110 111static int speyside_get_micbias(struct snd_soc_dapm_widget *source,112				struct snd_soc_dapm_widget *sink)113{114	if (speyside_jack_polarity && (snd_soc_dapm_widget_name_cmp(source, "MICB1") == 0))115		return 1;116	if (!speyside_jack_polarity && (snd_soc_dapm_widget_name_cmp(source, "MICB2") == 0))117		return 1;118 119	return 0;120}121 122static void speyside_set_polarity(struct snd_soc_component *component,123				  int polarity)124{125	speyside_jack_polarity = !polarity;126	gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);127 128	/* Re-run DAPM to make sure we're using the correct mic bias */129	snd_soc_dapm_sync(snd_soc_component_get_dapm(component));130}131 132static int speyside_wm0010_init(struct snd_soc_pcm_runtime *rtd)133{134	struct snd_soc_dai *dai = snd_soc_rtd_to_codec(rtd, 0);135	int ret;136 137	ret = snd_soc_dai_set_sysclk(dai, 0, MCLK_AUDIO_RATE, 0);138	if (ret < 0)139		return ret;140 141	return 0;142}143 144static int speyside_wm8996_init(struct snd_soc_pcm_runtime *rtd)145{146	struct snd_soc_dai *dai = snd_soc_rtd_to_codec(rtd, 0);147	struct snd_soc_component *component = dai->component;148	int ret;149 150	ret = snd_soc_dai_set_sysclk(dai, WM8996_SYSCLK_MCLK2, 32768, 0);151	if (ret < 0)152		return ret;153 154	ret = gpio_request(WM8996_HPSEL_GPIO, "HP_SEL");155	if (ret != 0)156		pr_err("Failed to request HP_SEL GPIO: %d\n", ret);157	gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);158 159	ret = snd_soc_card_jack_new_pins(rtd->card, "Headset",160					 SND_JACK_LINEOUT | SND_JACK_HEADSET |161					 SND_JACK_BTN_0,162					 &speyside_headset,163					 speyside_headset_pins,164					 ARRAY_SIZE(speyside_headset_pins));165	if (ret)166		return ret;167 168	wm8996_detect(component, &speyside_headset, speyside_set_polarity);169 170	return 0;171}172 173static int speyside_late_probe(struct snd_soc_card *card)174{175	snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone");176	snd_soc_dapm_ignore_suspend(&card->dapm, "Headset Mic");177	snd_soc_dapm_ignore_suspend(&card->dapm, "Main AMIC");178	snd_soc_dapm_ignore_suspend(&card->dapm, "Main DMIC");179	snd_soc_dapm_ignore_suspend(&card->dapm, "Main Speaker");180	snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Output");181	snd_soc_dapm_ignore_suspend(&card->dapm, "WM1250 Input");182 183	return 0;184}185 186static const struct snd_soc_pcm_stream dsp_codec_params = {187	.formats = SNDRV_PCM_FMTBIT_S32_LE,188	.rate_min = 48000,189	.rate_max = 48000,190	.channels_min = 2,191	.channels_max = 2,192};193 194SND_SOC_DAILINK_DEFS(cpu_dsp,195	DAILINK_COMP_ARRAY(COMP_CPU("samsung-i2s.0")),196	DAILINK_COMP_ARRAY(COMP_CODEC("spi0.0", "wm0010-sdi1")),197	DAILINK_COMP_ARRAY(COMP_PLATFORM("samsung-i2s.0")));198 199SND_SOC_DAILINK_DEFS(dsp_codec,200	DAILINK_COMP_ARRAY(COMP_CPU("wm0010-sdi2")),201	DAILINK_COMP_ARRAY(COMP_CODEC("wm8996.1-001a", "wm8996-aif1")));202 203SND_SOC_DAILINK_DEFS(baseband,204	DAILINK_COMP_ARRAY(COMP_CPU("wm8996-aif2")),205	DAILINK_COMP_ARRAY(COMP_CODEC("wm1250-ev1.1-0027", "wm1250-ev1")));206 207static struct snd_soc_dai_link speyside_dai[] = {208	{209		.name = "CPU-DSP",210		.stream_name = "CPU-DSP",211		.init = speyside_wm0010_init,212		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF213				| SND_SOC_DAIFMT_CBM_CFM,214		SND_SOC_DAILINK_REG(cpu_dsp),215	},216	{217		.name = "DSP-CODEC",218		.stream_name = "DSP-CODEC",219		.init = speyside_wm8996_init,220		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF221				| SND_SOC_DAIFMT_CBM_CFM,222		.c2c_params = &dsp_codec_params,223		.num_c2c_params = 1,224		.ignore_suspend = 1,225		SND_SOC_DAILINK_REG(dsp_codec),226	},227	{228		.name = "Baseband",229		.stream_name = "Baseband",230		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF231				| SND_SOC_DAIFMT_CBM_CFM,232		.ignore_suspend = 1,233		SND_SOC_DAILINK_REG(baseband),234	},235};236 237static int speyside_wm9081_init(struct snd_soc_component *component)238{239	/* At any time the WM9081 is active it will have this clock */240	return snd_soc_component_set_sysclk(component, WM9081_SYSCLK_MCLK, 0,241					MCLK_AUDIO_RATE, 0);242}243 244static struct snd_soc_aux_dev speyside_aux_dev[] = {245	{246		.dlc = COMP_AUX("wm9081.1-006c"),247		.init = speyside_wm9081_init,248	},249};250 251static struct snd_soc_codec_conf speyside_codec_conf[] = {252	{253		.dlc = COMP_CODEC_CONF("wm9081.1-006c"),254		.name_prefix = "Sub",255	},256};257 258static const struct snd_kcontrol_new controls[] = {259	SOC_DAPM_PIN_SWITCH("Main Speaker"),260	SOC_DAPM_PIN_SWITCH("Main DMIC"),261	SOC_DAPM_PIN_SWITCH("Main AMIC"),262	SOC_DAPM_PIN_SWITCH("WM1250 Input"),263	SOC_DAPM_PIN_SWITCH("WM1250 Output"),264	SOC_DAPM_PIN_SWITCH("Headphone"),265};266 267static const struct snd_soc_dapm_widget widgets[] = {268	SND_SOC_DAPM_HP("Headphone", NULL),269	SND_SOC_DAPM_MIC("Headset Mic", NULL),270 271	SND_SOC_DAPM_SPK("Main Speaker", NULL),272 273	SND_SOC_DAPM_MIC("Main AMIC", NULL),274	SND_SOC_DAPM_MIC("Main DMIC", NULL),275};276 277static const struct snd_soc_dapm_route audio_paths[] = {278	{ "IN1RN", NULL, "MICB1" },279	{ "IN1RP", NULL, "MICB1" },280	{ "IN1RN", NULL, "MICB2" },281	{ "IN1RP", NULL, "MICB2" },282	{ "MICB1", NULL, "Headset Mic", speyside_get_micbias },283	{ "MICB2", NULL, "Headset Mic", speyside_get_micbias },284 285	{ "IN1LP", NULL, "MICB2" },286	{ "IN1RN", NULL, "MICB1" },287	{ "MICB2", NULL, "Main AMIC" },288 289	{ "DMIC1DAT", NULL, "MICB1" },290	{ "DMIC2DAT", NULL, "MICB1" },291	{ "MICB1", NULL, "Main DMIC" },292 293	{ "Headphone", NULL, "HPOUT1L" },294	{ "Headphone", NULL, "HPOUT1R" },295 296	{ "Sub IN1", NULL, "HPOUT2L" },297	{ "Sub IN2", NULL, "HPOUT2R" },298 299	{ "Main Speaker", NULL, "Sub SPKN" },300	{ "Main Speaker", NULL, "Sub SPKP" },301	{ "Main Speaker", NULL, "SPKDAT" },302};303 304static struct snd_soc_card speyside = {305	.name = "Speyside",306	.owner = THIS_MODULE,307	.dai_link = speyside_dai,308	.num_links = ARRAY_SIZE(speyside_dai),309	.aux_dev = speyside_aux_dev,310	.num_aux_devs = ARRAY_SIZE(speyside_aux_dev),311	.codec_conf = speyside_codec_conf,312	.num_configs = ARRAY_SIZE(speyside_codec_conf),313 314	.set_bias_level = speyside_set_bias_level,315	.set_bias_level_post = speyside_set_bias_level_post,316 317	.controls = controls,318	.num_controls = ARRAY_SIZE(controls),319	.dapm_widgets = widgets,320	.num_dapm_widgets = ARRAY_SIZE(widgets),321	.dapm_routes = audio_paths,322	.num_dapm_routes = ARRAY_SIZE(audio_paths),323	.fully_routed = true,324 325	.late_probe = speyside_late_probe,326};327 328static int speyside_probe(struct platform_device *pdev)329{330	struct snd_soc_card *card = &speyside;331	int ret;332 333	card->dev = &pdev->dev;334 335	ret = devm_snd_soc_register_card(&pdev->dev, card);336	if (ret)337		dev_err_probe(&pdev->dev, ret, "snd_soc_register_card() failed\n");338 339	return ret;340}341 342static struct platform_driver speyside_driver = {343	.driver = {344		.name = "speyside",345		.pm = &snd_soc_pm_ops,346	},347	.probe = speyside_probe,348};349 350module_platform_driver(speyside_driver);351 352MODULE_DESCRIPTION("Speyside audio support");353MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");354MODULE_LICENSE("GPL");355MODULE_ALIAS("platform:speyside");356