213 lines · json
1[2 {3 "EventCode": "0x100FE",4 "EventName": "PM_INST_CMPL",5 "BriefDescription": "PowerPC instruction completed."6 },7 {8 "EventCode": "0x1000A",9 "EventName": "PM_PMC3_REWIND",10 "BriefDescription": "The speculative event selected for PMC3 rewinds and the counter for PMC3 is not charged."11 },12 {13 "EventCode": "0x10010",14 "EventName": "PM_PMC4_OVERFLOW",15 "BriefDescription": "The event selected for PMC4 caused the event counter to overflow."16 },17 {18 "EventCode": "0x1001C",19 "EventName": "PM_ULTRAVISOR_INST_CMPL",20 "BriefDescription": "PowerPC instruction completed while the thread was in ultravisor state."21 },22 {23 "EventCode": "0x100F0",24 "EventName": "PM_CYC",25 "BriefDescription": "Processor cycles."26 },27 {28 "EventCode": "0x10020",29 "EventName": "PM_PMC4_REWIND",30 "BriefDescription": "The speculative event selected for PMC4 rewinds and the counter for PMC4 is not charged."31 },32 {33 "EventCode": "0x10022",34 "EventName": "PM_PMC2_SAVED",35 "BriefDescription": "The conditions for the speculative event selected for PMC2 are met and PMC2 is charged."36 },37 {38 "EventCode": "0x10024",39 "EventName": "PM_PMC5_OVERFLOW",40 "BriefDescription": "The event selected for PMC5 caused the event counter to overflow."41 },42 {43 "EventCode": "0x1002A",44 "EventName": "PM_PMC3_HELD_CYC",45 "BriefDescription": "Cycles when the speculative counter for PMC3 is frozen."46 },47 {48 "EventCode": "0x1F15E",49 "EventName": "PM_MRK_START_PROBE_NOP_CMPL",50 "BriefDescription": "Marked Start probe nop (AND R0,R0,R0) completed."51 },52 {53 "EventCode": "0x1006C",54 "EventName": "PM_RUN_CYC_ST_MODE",55 "BriefDescription": "Cycles when the run latch is set and the core is in ST mode."56 },57 {58 "EventCode": "0x101E8",59 "EventName": "PM_THRESH_EXC_256",60 "BriefDescription": "Threshold counter exceeded a count of 256."61 },62 {63 "EventCode": "0x101EC",64 "EventName": "PM_THRESH_MET",65 "BriefDescription": "Threshold exceeded."66 },67 {68 "EventCode": "0x100FA",69 "EventName": "PM_RUN_LATCH_ANY_THREAD_CYC",70 "BriefDescription": "Cycles when at least one thread has the run latch set."71 },72 {73 "EventCode": "0x2000A",74 "EventName": "PM_HYPERVISOR_CYC",75 "BriefDescription": "Cycles when the thread is in Hypervisor state. MSR[S HV PR]=010."76 },77 {78 "EventCode": "0x2000C",79 "EventName": "PM_RUN_LATCH_ALL_THREADS_CYC",80 "BriefDescription": "Cycles when the run latch is set for all threads."81 },82 {83 "EventCode": "0x20010",84 "EventName": "PM_PMC1_OVERFLOW",85 "BriefDescription": "The event selected for PMC1 caused the event counter to overflow."86 },87 {88 "EventCode": "0x2006C",89 "EventName": "PM_RUN_CYC_SMT4_MODE",90 "BriefDescription": "Cycles when this thread's run latch is set and the core is in SMT4 mode."91 },92 {93 "EventCode": "0x201E6",94 "EventName": "PM_THRESH_EXC_32",95 "BriefDescription": "Threshold counter exceeded a value of 32."96 },97 {98 "EventCode": "0x201E8",99 "EventName": "PM_THRESH_EXC_512",100 "BriefDescription": "Threshold counter exceeded a value of 512."101 },102 {103 "EventCode": "0x200F4",104 "EventName": "PM_RUN_CYC",105 "BriefDescription": "Processor cycles gated by the run latch."106 },107 {108 "EventCode": "0x200F8",109 "EventName": "PM_EXT_INT",110 "BriefDescription": "Cycles an external interrupt was active."111 },112 {113 "EventCode": "0x30010",114 "EventName": "PM_PMC2_OVERFLOW",115 "BriefDescription": "The event selected for PMC2 caused the event counter to overflow."116 },117 {118 "EventCode": "0x30020",119 "EventName": "PM_PMC2_REWIND",120 "BriefDescription": "The speculative event selected for PMC2 rewinds and the counter for PMC2 is not charged."121 },122 {123 "EventCode": "0x30022",124 "EventName": "PM_PMC4_SAVED",125 "BriefDescription": "The conditions for the speculative event selected for PMC4 are met and PMC4 is charged."126 },127 {128 "EventCode": "0x30024",129 "EventName": "PM_PMC6_OVERFLOW",130 "BriefDescription": "The event selected for PMC6 caused the event counter to overflow."131 },132 {133 "EventCode": "0x3405A",134 "EventName": "PM_PRIVILEGED_INST_CMPL",135 "BriefDescription": "PowerPC instruction completed while the thread was in Privileged state."136 },137 {138 "EventCode": "0x3006C",139 "EventName": "PM_RUN_CYC_SMT2_MODE",140 "BriefDescription": "Cycles when this thread's run latch is set and the core is in SMT2 mode."141 },142 {143 "EventCode": "0x301E8",144 "EventName": "PM_THRESH_EXC_64",145 "BriefDescription": "Threshold counter exceeded a value of 64."146 },147 {148 "EventCode": "0x301EA",149 "EventName": "PM_THRESH_EXC_1024",150 "BriefDescription": "Threshold counter exceeded a value of 1024."151 },152 {153 "EventCode": "0x40010",154 "EventName": "PM_PMC3_OVERFLOW",155 "BriefDescription": "The event selected for PMC3 caused the event counter to overflow."156 },157 {158 "EventCode": "0x40114",159 "EventName": "PM_MRK_START_PROBE_NOP_DISP",160 "BriefDescription": "Marked Start probe nop dispatched. Instruction AND R0,R0,R0."161 },162 {163 "EventCode": "0x4D010",164 "EventName": "PM_PMC1_SAVED",165 "BriefDescription": "The conditions for the speculative event selected for PMC1 are met and PMC1 is charged."166 },167 {168 "EventCode": "0x4D012",169 "EventName": "PM_PMC3_SAVED",170 "BriefDescription": "The conditions for the speculative event selected for PMC3 are met and PMC3 is charged."171 },172 {173 "EventCode": "0x4D022",174 "EventName": "PM_HYPERVISOR_INST_CMPL",175 "BriefDescription": "PowerPC instruction completed while the thread was in hypervisor state."176 },177 {178 "EventCode": "0x4D026",179 "EventName": "PM_ULTRAVISOR_CYC",180 "BriefDescription": "Cycles when the thread is in Ultravisor state. MSR[S HV PR]=110."181 },182 {183 "EventCode": "0x4D028",184 "EventName": "PM_PRIVILEGED_CYC",185 "BriefDescription": "Cycles when the thread is in Privileged state. MSR[S HV PR]=x00."186 },187 {188 "EventCode": "0x4D02C",189 "EventName": "PM_PMC1_REWIND",190 "BriefDescription": "The speculative event selected for PMC1 rewinds and the counter for PMC1 is not charged."191 },192 {193 "EventCode": "0x40030",194 "EventName": "PM_INST_FIN",195 "BriefDescription": "Instruction finished."196 },197 {198 "EventCode": "0x40134",199 "EventName": "PM_MRK_INST_TIMEO",200 "BriefDescription": "Marked instruction finish timeout (instruction was lost)."201 },202 {203 "EventCode": "0x401EA",204 "EventName": "PM_THRESH_EXC_128",205 "BriefDescription": "Threshold counter exceeded a value of 128."206 },207 {208 "EventCode": "0x500FA",209 "EventName": "PM_RUN_INST_CMPL",210 "BriefDescription": "PowerPC instruction completed while the run latch is set."211 }212]213